S t e e l H o o k-ups AIR HANDLING UNIT SOLUTIONS
|
|
- Myron Lee
- 6 years ago
- Views:
Transcription
1 S t e e l H o o k-ups AIR HANDLING UNIT SOLUTIONS
2 Q u a l i t y, C o n v e n i e n c e a n d V a l u e
3 S t e e l H o o k-ups When it comes to standard and custom coil/piping hook-up packages for Fan Coil Units, Reheat Coils, Heat pumps, etc., Flow Design not only pioneered the concept, but remains the leading provider of hook-up packages in the industry. However, some assume that customization and innovation ends at 2 inches. Not true. Not only do we offer standard and customized hook-up packages for ½ 2, but also for our larger steel components. Air Handling Units are one of the most common areas where a larger hook-up solution is needed. Instead of having to build a hook-up for an Air Handling Unit, piece by piece, which increases labor, and in-turn increases cost, you can look to Flow Design Hook-Up Packages to save time and money. AIR HANDLING UNIT SOLUTIONS At Flow Design, we offer standard hook-ups for Air Handling Units in 2 and above. We will also help you design customized project-specific hookup solutions where our standard packages do not quite meet specification requirements. With Flow Design s industry recognized service and support you can be assured of a quality product delivered on time. Here you will see four standard hook-ups we have seen to be the most common when it comes to Air Handling Units. In addition to these, Flow Design can help design with the rep and end user, a customized projectspecific hook-up package. Please feel free to contact us for specific contract needs ASK-FLOW, or visit us at
4 T y p i c a l S t e e l H o o k-ups A p p l i c at i o n s T w o-way Automat i c B a l a n c i n g S i n g l e C o i l S t e e l a n d B r a s s H o o k-up P a c k a g e WT- AUTOMATIC BALANCING VALVE WITH EXTENDED S AND BUTTERFLY VALVE WITH T w o-way Automat i c B a l a n c i n g D u a l C o i l S t e e l a n d B r a s s H o o k-up P a c k a g e WITH UNIO WT- AUTOMATIC BALANCING VALVE WITH EXTENDED S AND BUTTERFLY VALVE WITH EXT.
5 T w o-way Manual B a l a n c i n g S i n g l e C o i l S t e e l a n d B r a s s H o o k-up P a c k a g e WITH P/T PORT UNION ET - VENTURI WITH BUTTERFLY VALVE, EXT. S, HANDLE AND AIR HANDLING UNIT SOLUTIONS T w o-way Manual B a l a n c i n g D u a l C o i l S t e e l a n d B r a s s H o o k-up P a c k a g e UNION ET - VENTURI WITH BUTTERFLY VALVE, EXT. S, HANDLE AND WITH EXT.
6 H o o k-up V a lv e s Form No.: F319_0 Date: 8.07 M a n u a l B a l a n c i n g Model ET (2 1/2 4 ) AccuSetter with inlet MPR to attach to threaded brass valves. Model ER/EF (ER 2 1/2-6 ; EF 2 & 6 ) AccuSetter models flange directly to flanged ATC valves. Model AG (2 14 ) Grooved AccuSetter 150# gooved flange adapter, supplied loose, for Inlet flange can have a one-or two-size reduction Integral dielectric union attchment to butterfly valve and grooved pipe Built-in five-diameter inlet section Built-in five-diameter inlet section Pressure access ports standard Model GF adapter flange and lug butterfly valve 150# R.F. flange and lug butterfly valve Infinite-position handle with memory stop attach to downstream side attached to downstream side through 6 with a gear operator 8 and up Pressure access ports and an infiniteposition handle with memory stop standard Pressure ports with infinite-position standard handles standard and memory stop Field installation requires one standard grooved Models contain a five-pipe diameter inlet coupling for the upstream attachment extension A u t o m at i c B a l a n c i n g Model WT (2 1/2 4 ) Grooved AutoFlow regulator designed to mate with threaded brass ATC Shipped assembled Dual pressure ports Directional flow Dielectric nipple Model WG (2 1/2 14 ) Grooved AutoFlow regulator Directional flow Steel/Iorn Dual pressure ports Model WR 3 6 ) Grooved AutoFlow regulator designed to mate with reduced flanged ATC valve Shipped assembled Dual pressure ports Directional flow AutoFlow and FlowSet Coil Hook-up packages are ready-to-install configurations. C o m p o n e n t s & A c c e s s o r i e s Manufactured and leak-proof tested by Flow Design Model FG (2 8 ) 150# ANSI raised fance forged accessory steel flange Use with 1/4 FPT tap for P/T port, air vent, mini-ball valve and other accessories 1/2 and 3/4 connections are available for larger drains and thermowells Available options location at clock positions: 3, 6, 9 $ 12 Model PT/XL (2 8 ) Superseal pressure/temperature test port 1/4 Brass body/dual durometer EPDM Nordel valve with retained safety cap Standard and extra-long size available Rated F Model BF (2 6 ) Cast-iron lug-type butterfly valve Infinite-position handle with memory stop Model GF (2 12 ) Grooved flange adapter provides a direct transition from flanged components to grooved piping Metal flange washer adapters shipped with units & recommended for use with butterfly valves Model HN Hose end drain valve Cast brass with cap & plastic retainer strap, 3/4 hose outlet Ball valve shut-off Model DN (DN 1/2 2 1/2 ) Dielectric nipple 300#, 225 F rated steel dielectric nipple Available MPT X MPT Model Flange (2 12 ) Steel threaded flange Model CW (2 8 ) Cast-iron wye-strainer with 125#/150# compatible flange connections Use Model UB for optional blowdown valve Stainless steel perforated screen Model AV/AA Manual air valve Non-removable coin-type top Automatic air vent 1/4 process connection, forged brass body and plastic float rated to release air Vent with top shut-off screw and plastic paddle in the water stream to break air bubbles Rated F Represented by: 8908 Governors Row Dallas, TX ASK-FLOW / A Division of IMI Indoor Climate
S t e e l H o o k-ups AIR HANDLING UNIT SOLUTIONS
S t e e l H o o k-ups AIR HANDLING UNIT SOLUTIONS Quality, Convenience and Value S t e e l H o o k-ups When it comes to standard and custom coil/piping hook-up packages for Fan Coil Units, Reheat Coils,
More informationINVITATION TO BID FAILURE TO SIGN WILL DISQUALIFY BID Bid No.: LIBRARY-AHU ADDENDUM NO. 2
INVITATION TO BID FAILURE TO SIGN WILL DISQUALIFY BID Bid No.: LIBRARY-AHU ADDENDUM NO. 2 Signature City Zip Due Date: 9/7/2016 at 3:00 P.M. Show bid opening and bid invitation number in lower left hand
More informationAutoFlow. Automatic Flow Control Valves
AutoFlow Automatic Flow Control Valves IMI FLOW DESIGN / AutoFlow / F010 Automatic Balancing Brochure Benefits of Automatic Balancing System equipment, such as chillers and individual terminal units, is
More informationA. Provide all HVAC specialties required to complete the installation of all HVAC systems. B. Manufacturers: Refer to individual product item.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 02 PART 1 GENERAL 1.01 DESCRIPTION A. Provide all HVAC specialties required to complete the installation of all HVAC systems.
More informationA. Valves and specialties including necessary accessories indicated on drawings and specified in this section.
SECTION 15081 - VALVES AND SPECIALTIES (HVAC) PART - 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More informationHVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationDIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationDescription. Ballorex Venturi. Versions. Benefits. Robinets manuels Balancing
Ballorex Venturi Description The Ballorex Venturi is a range of manual balancing valves used in water-based heating and cooling systems to ensure an evenly distributed flow in zones, branches, risers and
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
More informationKNX Series - SV (integral ball valve STrainer) HVAC Hook-up Kits
VALVES & AESSORIES KNX Series - (integral ball valve STrainer) HVA Hook-up Kits Gruvlok KNX Series Hook-up Kits integrate the components required to connect piping to hydronic heating system or chiller
More informationInnovation + Quality. Valves, controls + systems Balancing and Control Valves
Innovation + Quality Valves, controls + systems Balancing and Control Valves Balancing and Control Valves Catalog Hydrocontrol Static Balancing Valves Recomended flow rate chart 4 Hydrocontrol VTR Static
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationInnovation + Quality. Valves, controls + systems Balancing and Control Valves
Innovation + Quality Valves, controls + systems Balancing and Control Valves Cocon Q Pressure independent control valve Product specification Size: L1 L2 H1 H2 ½, ½ LF 2.75 3.9 2.0 1.9 ¾ LF 2.9 4.2 2.0
More informationTable of Contents. Automatic Section A B V. Coil Piping Packages A B P P. Water Source Heat Pump Hose Kits A B H K
Table of Contents Automatic Section Automatic Balance Valves Installation Operation Maintenance Instructions / Warranty Technical Information How To Order Coil Piping Packages Package Types How To Order
More informationSECTION METERS AND GAUGES
SECTION 22 05 19 PART 1 GENERAL 1.1 DESCRIPTION OF WORK: A. Extent of meters and gauges required by this section is indicated on drawings and/or specified in other Division-22 sections. B. Types of meters
More informationMercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 23 22 13 STEAM AND CONDENSATE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationPIPING PACKAGES For Chilled and Hot Water Fan Coil Units
WWW.KRUEGER-HVAC.COM PIPING PACKAGES For Chilled and Hot Water Fan Coil Units PROVIDING YOU WITH AIR DISTRIBUTION AND EQUIPMENT SOLUTIONS TABLE OF CONTENTS General Notes... 4 Code Descriptions... 5 Guide
More informationSECTION HVAC WATER PIPING ACCESSORIES
SECTION 23 05 10 PART 1 - GENERAL HVAC WATER PIPING ACCESSORIES 1.01 RELATED DOCUMENTS 1.02 SCOPE A. The requirements of the General Conditions, Supplementary Conditions, Division 1, Division 20, and Drawings
More informationPIPING PACKAGES TABLE OF CONTENTS
PIPING PACKAGES TABLE OF CONTENTS ITEM PAGE General Notes and Legend........................................................ 3 Piping Package Code Descriptions & Diagrams VAV Products and HL, HP, VF, and
More informationVictaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings
More informationLOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER. SECTION.0 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
More informationR2F Compact Commissioning & 4 Port Control Valve Fan Coil Unit Valve Set Module
R2F Compact Commissioning & 4 Port Control Valve Fan Coil Unit Valve Set Module The R2F Compact Commissioning & 4 Port Valve FCU Module concept offers a pre-assembled, tested compact Ready to Fit unit
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationVALVCHEQ BACKFLOW PREVENTERS FIGURE DC03
Double check valves for medium hazard rated applications Flanged and roll grooved end connections FEATURES GENERAL APPLICATION The DC0 provides protection from both backsiphonage and backpressure of the
More informationA. This Section includes natural gas piping, specialties, and accessories within the building.
SECTION 226313 NATURAL GAS PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information***************************************************************************************************************
15515 VALVES, HANGERS, AND SPECIALTIES *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number:23 21 16 ***************************************************************************************************************
More informationSECTION METERS AND GAGES FOR HVAC PIPING
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. 1.2 SUMMARY A. This
More informationNew Fan Coil Piping Packages
New Fan Coil Piping Packages SO BUILT TOUGH, TOUGH. WE BUILT GUARANTEE TO LAST. IT. www.superiorrex.com Piping Packages Table of Contents General Notes and Legend... 3 Piping Package Code Descriptions
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationInstallation Operation Maintenance
Installation Operation Maintenance www.challengervalves.com.au 1 QAD#IM1015 REVC 3.10.15 Index 1. INTRODUCTION 3 1.1 Design Features 1.2 Flange and Pipe Compatibility 3 1.3 Operating Pressures and Temperatures
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION FACILITY FUEL OIL PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
More informationPRESSURE RELIEF VALVE CONTROL VALVE
PRESSURE RELIEF VALVE CONTROL VALVE LEHRY Pressure Relief Valve, Sustaining or Backpressure Control Valve is designed to permitting flow when upstream pressure is above the adjustable setpoint of the control
More informationSubmittal. Front View Side View
RBHO Horizontal Low Profile Concealed Free Return Submittal FCU-RBHO-1.0 07-25-18 Top View (Drain Pan Omitted) Bottom View Front View Side View Left hand unit shown. All dimensions are inches [millimeters].
More informationSubmittal 30 [762] 36 [914] 40 [1016] 50 [1270] 60 [1524] 70 [1778]
FCU-THBP-1.0 08-22-18 THBP Horizontal Low Profile Plenum Return Top View (Drain Pan Omitted) Bottom View Front View Left hand unit shown. All dimensions are inches [millimeters]. Side View Unit Size A
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationDivision 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationHenderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
More informationGuide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
More informationA. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationCOMMERCIAL. Product PRofile
Product PRofile 2 PRODUCT OVERVIEW INtroduction At Bray International, Inc., our business is helping our customers with their flow control requirements. Our modular product line of butterfly, ball and
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More informationReturn not FoR ReSale Next Page
Not For Resale 10.06 TRUSTED FOR 150 YEARS We built our reputation from the ground up. Anvil s history stretches back to the mid1800s, when a company named Grinnell began providing its customers with the
More informationFlow Data for NIBCO Circuit Balancing Valves 1/2 to 2 (Figure Number 1710)
NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PHONE: 574.295.3000 FAX: 574.295.3307 WEB: www.nibco.com INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS Flow Data for NIBCO
More informationFigure 1710 Flow Data
AHEAD OF THE FLOW Figure 1710 Flow Data Circuit Balancing Valve Why balance your system? Whether a system is designed for heating or chilling it must be properly adjusted and balanced for optimum design
More informationPIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5
PERFORMANCE SPECIFICATIONS PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5 PIC-V Valve 1. PRESSURE INDEPENDENT ACTUATED BALL VALVES AND CARTRIDGE (PIC-V)
More informationFabricated Duplex Strainers
Applications Chemical Industry Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Oil & Gas Fabricated Duplex Strainers Pressures to 1480 PSIG Temperatures to 800ºF FEATURES
More informationVertical Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Vertical Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. General: Refer to General and Special Condition Specifications in Division 01 for all required submissions of this
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationPP1 Series Piping Packages for VG1000 Series Ball Valves
PP Series Piping Packages for VG000 Series Ball s Product Bulletin PP2xxxxx- Series, PP8xxxxx- Series Code No. LIT-20974 Issued August, 204 PP Series Piping Packages are designed to provide an easier way
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
More informationVALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationSECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL
SECTION 22 10 10 PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationVIFB Coil Technical Guide
TGVIFB-5 VIFB Coil Technical Guide VERTICAL TUBE INTEGRAL FACE AND BY-PASS HEATING COILS FOR AIR PREHEATING Since 1875, the L.J. Wing Company has been a leader in providing innovative solutions for difficult
More informationCBV Series. Circuit Balancing Valves
CBV Series Circuit Balancing Valves FILE NO: 36.10IN DATE: Dec. 15, 2010 SUPERSEDES: 36.10IN DATE: Nov. 05, 2009 CBV Series Circuit Balancing Valves - Introduction Circuit balancing valves (CBVs) combine
More informationBiogas safety control equipment
Biogas safety control equipment As environmental concerns and energy efficiency are increasing, efficient economical and safe gas control systems become an increasingly important part of operating the
More informationNew Fan Coil Piping Package. Redefine your comfort zone.
New Fan Coil Piping Package PIPING PACKAGES Table of Contents General Notes and Legend...3 Piping Package Code Descriptions & Diagrams THB, THH and TVB Fan Coils...4 TVS Fan Coil, 2-Way...5 TVS Fan Coil,
More informationFan Coils Valve packages general data: V-D1
Fan Coils Valve packages general data: V-D1 Zehnder Rittling Console and High Capacity Fan Coils have standard valve packages available as a factory built assembly and field-installed option for the main
More informationHD Series. Pilot-Operated Regulating Valves. HD Series features & benefits
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2004 Watson McDaniel Company features & benefits Ductile Iron body for higher pressures Full port strainer
More informationBalancing Products List Price Book
Balancing Products Book Jomar Valve is pleased to announce the introduction of a complete line of hydronic balancing packages to its extensive line of valve products. Coil piping packages have revolutionized
More informationLC149 SERIES BUTTERFLY VALVE INSTALLATION, OPERATION, & MAINTENANCE
LC149 SERIES BUTTERFLY VALVE INSTALLATION, OPERATION, & MAINTENANCE APOLLO BFV INSTALLATION MANUAL - Page 2 of 12 INTRODUCTION... 3 DESIGN FEATURES... 3 OPERATING PRESSURES... 3 PRODUCT STORAGE... 3 PRODUCT
More informationHorizontal Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Horizontal Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationSECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS
SECTION 15160 - PUMPS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
More informationOPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
More informationModel MTB-ASME Vertical Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
More informationType 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
More informationHerpteraium SECTION VALVES GENERAL
SECTION 22 05 23 VALVES GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
More informationSee Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. Water pressure reducing valves PR (36LF) Series Residential and commercial applications The Apollo 36LF pressure
More informationTrunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
More informationBall Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15
05/06/15 G8 Full Port - Compression w/ Drain Cap - Forged Brass Rated for cold water, oil & gas Blow-out proof stem Temperature Range: -30 to 150C (-22 to 302F) Working Pressure: 600 psi Blue handle Lead-Free
More informationButterfly valves PN6, PN10, PN16
4 136 Butterfly valves PN6, PN10, PN16 VKF46... Butterfly valves for fitting between counter-flanges Nominal pressures PN6, PN10, PN16 For fitting between PN6, PN10 or PN16 counter-flanges to ISO 7005
More informationSee Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. WATER PRESSURE REDUCING VALVES PR (36LF) SERIES RESIDENTIAL AND COMMERCIAL APPLICATIONS The Apollo 36LF pressure
More informationModel MTB-ASME Horizontal Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
More informationA. This Section includes pipe and fitting materials, joining methods, special-duty valves, and specialties for the following:
Page 232113-1 SECTION 232113 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationT200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
More informationButterfly Valves. watts.com
Butterfly Valves watts.com Durafil is a registered trademark of Cargill, Limited. Teflon is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated. Uniseal is a registered trademark
More informationA. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.
SECTION 221513 - COMPRESSED-AIR PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. 1.2
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Vacuum breakers. 2. Backflow preventers. 3. Water pressure-reducing valves. 4. Balancing valves.
More informationOUNCES PRESSURE REGULATOR
OUNCES PRESSURE REGULATOR VACUUM BACK PRESSURE TO VACUUM APPLICATIONS: Vacuum distribution systems, compressor suction regulation to prevent excessive vacuum on wells. A minimum of 10 psi instrument gas
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationCONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
More informationGEO-ENTERPRISES, INC.
GEO-ENTERPRISES, INC. Oklahoma Office 2640 N Highway 167 Catoosa, OK 74015 Ph: (918) 379-0193 Fax: (918) 379-0471 Missouri Office 1919 N Maple St Buffalo, MO 65622 Ph: (417) 345-7400 Fax: (417) 345-4255
More informationCALEFFI. FLOWCAL Automatic flow balancing valve with polymer cartridge. 121 series 01141/11 NA. Function
FLOWCAL Automatic flow balancing valve with polymer cartridge 121 series REGISTERED BSI EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01141/11 NA Function The FlowCal automatic
More informationB. Work Included: The work shall include, but not be limited to, the following: 1. Types of valves specified in this section include the following:
SECTION 15100 - PART 1 - GENERAL 1.1 SUMMARY A. Provide labor, materials, equipment and services, and perform operations required for complete installation of Valves and related work as indicated on the
More informationSuction Guide & Flo-Trex Valve Series
Suction Guide & Flo-Trex Valve Series Pump Trim FILE NO: 6-1 DATE: August 2010 SUPERSEDES: 6-1 DATE: July 200 Series SG & FTV Suction Guides Designed for direct mounting on the suction flange of horizontal
More informationSECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Valves. B. Related Sections: 1.02 REFERENCES 1. Section 22 05 53 (15075) Identification
More informationETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL
ETP-5E & ETP-10E ECO-TECH PLUS ELECTRIC CONVECTION STEAMER PARTS AND SERVICE MANUAL EFFECTIVE JANUARY 10, 2018 Superseding All Previous Parts Lists. The Company reserves the right to make substitution
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationPRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Upstream: 10 psig to 300 psig Downstream: 10 psig to 300
More information