9700/F9700 SERIES RIM EXIT DEVICE

Size: px
Start display at page:

Download "9700/F9700 SERIES RIM EXIT DEVICE"

Transcription

1 INSTALLATION INSTRUCTIONS 9700/F9700 SERIES RIM EXIT DEVICE Index: Screw chart Tools required Outside trim options "03" Additional door prep Device installation Options available 5300 retro-fit preparation Spotting template Note: One set of instructions should be left with building owner after device has been installed I /2010

2 SCREW CHART (2) x 1" R.H.P.M.S. (Metal or Thru Bolts) (2) #12 x 1 1/4" R.H.P.T.S. (Wood Door) Chassis Mounting Chassis Mounting (2) x 1" R.H.P.M.S. (Metal or Thru Bolts) (2) #12 x 1 1/4" R.H.P.T.S. (Wood Door) End Cap Bracket End Cap Bracket (6) 8-32 x 3/8" F.H.P.M.S. Chassis Cover & End Cap (2) x 5/8" F.H.P.M.S. (Metal) Strike Mounting (2) #10 x 1" F.H.P.T.S. (Wood Door) Strike Mounting (6) x 3/4" O.H.P.M.S. (Metal) Strike Mounting (6) #12 x 1" F.H.P.T.S. (Wood Door) Strike Mounting (2) x 3/8" F.H.P.M.S. (Metal) Strike Mounting (2) #10 x 1" F.H.P.T.S. (Wood Door) Strike Mounting (2) x 5/8" F.H.P.M.S. (Metal) Strike Mounting (2) #10 x 1" F.H.P.T.S. (Wood Door) Strike Mounting 1

3 HANDING OF DOOR RHR LHR Read the entire instruction sheet prior to installation. Before Installing Hardware: 1. Door should be fitted and hung. 2. Verify door width, handing and product with carton label for correct exit device & length. (See Step 9) 3. For hand reversal of outside lever trim see page 3. NOTE: If device is to be installed over glass lite panels, glass lite shim kit may be required order GK9200. TYPICAL APPLICATIONS 9700 Series Device 9700 Series Device 9700 Series Device 9700 Series Device 9800 Series Device 9700 Series Device 9600 Series Device SPECIAL TOOLS FOR INSTALLATION Tap, Tap Drill bits: 1/8", 3/8", #25, #16, #21 Hole saw 1 1/4" diameter for trim (if required) or jig saw. 5/32" Allen wrench for lever trim. 2

4 TYPICAL OUTSIDE TRIM INSTRUCTIONS Note: When used with narrow stiles, consult door manufacturer for compatibilty. LHRB TRIM SHOWN RHRB OPPOSITE OP02 ZODT ZP25 ZP02 ZP03/04 ZP11/ZP12 ZK23 ZK08/09 ZR23 ZC23 ZT23 ZG23 ZR08/09 ZC08/09 ZT08/09 ZG08/09 All trims are free wheeling. (Handle will rotate when locked.) Key removed. Tighten Securely IMPORTANT Note: All lever handles except for "clutch" are shipped unattached. To install; Place handle in desired position and attach with allen screw located in bcak of trim plate. 5/32" Allen wrench required. To change hand on "clutch" trim rotate and "break" lever around to desired hand. For functions "09" & "12" operation a DORMA #09 cam is required. Remove key, install cylinder as shown then cam as shown, legs of cam stradle actuator. "09" Cam Locked position Conventional 1 1/8" rim cylinder #80R20SC with tail piece, keyed differently to a random combination supplied with functions "03" & "04" trim unless otherwise noted. 21/32" 61/64" 1 1/8" Conventional 1 1/8" mortise cylinder #90X13SC118 supplied with DORMA #13 cam, keyed differently to a random combination supplied with functions "08" & "11" trim unless otherwise noted. 3

5 ADDITIONAL DOOR PREP REQUIREMENTS 9700/F9700 Rim Exit Device RHR Shown LHR Opposite Required for "03" & "04" function on device with cylinder only and no trim. (NOT TO SCALE) NOTE: "04" function not available on fire rate device. "Fire rated devices can not be dogged." (SEE STEP 2) VERTICAL REF. LINE (CENTERLINE OF CHASSIS) EDGE OF STOP OR MULLION (SEE STEP 2) VERTICAL REF. LINE (CENTERLINE OF CHASSIS) NOTE: If using 80CK cyinder adapter kit with trim; hole diameter required is 1 3/8". 7/32" DIA. HOLE DIA. (2) PLACES 13/16" 1 3/16" DIA. HOLE (TRIM SIDE ONLY) 1/4" 1/4" HORIZONTAL REF. LINE 3/8" DIA. HOLE (DEVICE SIDE ONLY) IMPORTANT NOTE: Hole dimensions may vary, when using cylinder by other manufacturer's use backplate supplied with cylinder as drilling template. INSIDE FACE OF DOOR (DEVICE SIDE) OUTSIDE FACE OF DOOR (TRIM SIDE) 4

6 1 Open box, layout all parts and verify prior to starting installation. See page (1) one for parts. Note: If this is a retro-fit from current 5300 series see page 12 prior to proceeding. 2 Door preperation Chassis vertical ref. line Chassis horizontal ref. line Strikes Standard /16" Based on 1/2" threshold and 3/16" clearance between threshold and door after door is hung. Finished floor LHR Based on 1/2" blade stop "cut out"; If using trim dimensions may vary. See proper device and trim templates Rim 9800 Vertical rod RHR LHR Edge guard Edge of stop or mullion Vert. ref. 1 3/8" Standard #430 strike 1 1/2" For #463 or #486 strike 7/8" For #443 strike C L Vertical reference line Backset or vertical reference is measured from outer edge of door as shown. Minimum stile is less glass stop. Type of installation Single door 1/2" blade stop Pairs and double egress Min. Stile Rounded edge door Minimum vertical ref. of chassis 1 3/8" 1 1/4" Pull only 1 5/8" Vert. ref. Beveled edge door Minimum Stile "Z" trim 2 " 2 3/16" Min. Stile 2 1/8"" 2 3/8" Mullions F KR F1340KR Edge of Stop or Mullion Vertical ref. 1/2" Outside edge 1 3/8" Standard #430 strike 320 Strike 7/8" Standard #443 recessed strike 1 1/2" For standard #463 & 486 strike 1 1/2" For standard #463 & 486 strike 5

7 3 Prepare frame for strike 1 3/4" 1 1/16" x 5/8" F.H.P.M.S. #10 x 1" F.H.P.T.S. 425/443 5/8" 13/16" 486 For metal frame: No. 21 drill x tap For wood frame: 1/8" drill for pilot hole x 3/8" F.H.P.M.S. #10 x 1" F.H.P.T.S. For metal frame: No. 21 drill x tap For wood frame: 1/8" drill for pilot hole x 5/8" F.H.P.M.S. #10 x 1" F.H.P.T.S. Strike angle (Fire rated device only) must be installed on rated openings x 3/4" O.H.P.M.S. #12 x 1" O.H.P.T.S. For metal frame: No. 16 drill x tap For wood frame: 1/8" drill for pilot hole Edge of door stop or mullion 1/2" 15/32" 15/16" R.H.P.M.S. Strike angle (Pt. no ) 4 If not done layout device on door using drilling template T9700 located at rear of booklet. For additional templates contact DORMA at or Refer to carton label for model and trim number prior to drilling. Prepare mounting holes and cut-outs per template. VERTICAL REF. LINE (See Backsets on page 5.) HORIZONTAL REF. LINE Verify all holes prior to drilling. 7 1/2" No. 25 No. 16 3/8" 6

8 9 Prepare to install touch bar and rail on door. NOTE: All dimensions are based on 1/2" stop height; Verify strikes, stile width, any trim and stop height prior to making any cuts. If cutting is required follow instructions below. Size AA: Fits 48" door opening without cutting. Can be cut to fit a 32 1/2" minimum door opening. Size BB: Fits 36" door opening without cutting. Can be cut to fit a 26 1/2" minimum door opening. Size CC: Fits 36" door opening with out cutting. Using a shorter touch pad then the standard "B" size allows it to be cut to 23 1/2" door opening. Verify device length with box label; "AA", "BB" or "CC", ie. 9700BB Note: Models with prefix options such as "ES", "DE" etc. may not be cut down to minimums shown to left. Consult factory or catalog for details. Standard "BB" touch bar and rail 31 1/2" Edge of stop Example: 36" Door opening Note: If door opening width is less then standard touch bar will have to be cut down. ie: door opening width 34" subtract 2" from rear of touch bar and rail, tape and cut to length as shown. Touch bar and rail assembly 2" Filler Apx. 1/4"-3/16" Tape Edge of stop IMPORTANT Use caution when cutting touchbar and rail to size on models with "ES", "MS", "LM" or "DWA" prefix options. These units contain internal wiring. For models with prefix options "BPA", BPAR" or "DE" remove filler containing electronics before cutting. 10 Secure chassis to door as shown. Metal - (2) x 1 1/2" R.H.P.M.S. Wood - (2) #12 x 1 1/4" R.H.P.T.S. (For other options; trim, thru bolts, etc. see below.) Optional mounting For 3 1/2" stiles or less on aluminum doors, place shim under chassis prior to mounting on door. (Finished side to outside face.) #463 Strike F9700 Series chassis assembly Strike angle (Must be installed) (2) F.H.P.M.S. (2) R.H.P.M.S. (4) O.H.P.M.S. 7

9 11 Install touch bar and rail assembly and end cap to door. Remove two 8-32 screws from chassis, slide touch bar and rail assembly under rear of chassis. Note: If device has prefix "ES" ensure that pins in lever bolt align with slots in actuator located inside nose of touch bar. See instruction sheet IES-7 packed with device. Install (2) two 8-32 x 3/8" P.H.P.M.S. to secure touchbar to chassis. Hold rear mounting bracket tightly against door and rear of rail. Mark (2) two holes and drill per chart. Secure with proper fasteners. 1/8" Drill 1" Deep (Wood) No. 16 Drill Tap (Metal) 3/8" Dia. (Thru bolts) Metal/thru-bolts - (2) x 1" F.H.P.M.S. Wood - (2) #12 x 1 1/4" F.H.P.T.S. (2) 8-32 x 3/8" P.H.P.M.S. "Remove protective covering from the touchbar and rail assembly prior to installing on door." Bracket should be flush against door and tight against rear of rail. For the following models prefixes: "ES", "MS", "LM" or "DWA" drill an additional 1/2" diameter hole as shown. See options pages at rear for addtional information. 1/2" DIA. NOTE: If carton label list prefix; "ES", "MS", "LM", "BPA", "BPAR", "DWA", "LM/MS/BP" or "CD" prefix see Options pages at rear. ES105 (Required for above options.) 12 Install center case cover and end cap. 13 Check dogging operation (if equipped). Standard hex key dogging, depress touch bar, insert supplied hex key and rotate clock wise to dog and counter clock wise to undog. (6) 8-32 x 3/8" P.H.F.H.M.S. Start all (4) screws prior to tightening. 8

10 OPTIONS 5/16" "CD" (CYLINDER DOGGING) OPTION: Cylinder dogging installation instructions & cylinder specifications. Arrow Assa Best Corbin Falcon b3 a 11/16" Min Useable Cams DORMA Ilco/Unican Lori Sargent Schlage Yale 001 Std. (Yale) C136 A b2 "BPA" & "BPAR" (ALARM) OPTION: FOR DIRECT WIRED SEE NEXT PAGE BPA: Battery powered alarm, sounds continuous or until disarmed. BPAR: Battery powered alarm, sounds for 4 minutes, automatically resets. "Alarm mode set at factory." c Witness Marks 10 SC1 SC Std or NOTE: Touch bar must be in dogged down position, to remove the rear filler panel. b1 Note: DORMA mortise cylinder supplied. To use other manufacture cylinders, "L" less cylinder is available. 1" Min. to 1 1/8" Max. Note: When using IC core cylinders, ensure that cam is in proper position prior to installing the new core. Correct In-correct "LM" (LATCH MONITOR) OPTION: Latch monitor: Monitors movement of bellcrank, with or without depressing of touch bar. Can be wired normally open or normally closed. *NOTE: Use caution when cutting touch bar and rail to NOTE: Touch bar must length. Additional hole required see step 11. be in dogged down position, to remove the rear filler panel. * SPDT,.5 28VDC max. Black Common Green Normally Open Red Normally Closed SIZE A: Will fit 48" door opening without cutting. Can be cut to fit a 371/2" minimum door opening. SIZE B: Will fit 36" door opening without cutting. Can be cut to fit a 31 1/2" minimum door opening. SIZE C: Will fit 36" door opening without cutting. Can be cut to fit a 28 1/2" minimum door opening. *NOTE: Use caution when cutting touch bar and rail to length. b a1 c2 c x 1/4" P.H.F.H.U.C.M.S. a x 3/4" R.H.P.M.S. (DORMA mortise cylinder supplied.) To install customer supplied cylinder, see cylinder dogging option at top of page. 9 To replace battery remove endcap. Refer to additional alarm instructions packed with device for operation of alarmed exit device.

11 OPTIONS "ES" (ELECTRIC LATCH RETRACTION) OPTION: "DWA" (DIRECT WIRED ALARM) OPTION: Electrically retracts latchbolt(s) when energized by power supply. REQUIRES DORMA PS501 POWER SUPPLY AND ES105 POWER TRANSFER. PS501 Will operate (2) "ES" 9600 exit devices, but is capable of powering (2) additional devices by installing the optional "ES-2" card. *NOTE: Use caution when cutting touch bar and rail to length. Requires additional hole see step Red Black Positive Negative (Polarized) Connected to outside power source Volt AC/DC Power Supply. i.e. DORMA ES100 etc., Contact DORMA for other power supplies available. Refer to additional sheet IAL9000 packed with device for operation of alarmed exit device. DWA Battery Eliminator 8-32 x 1/4" T.H.P.U.C.M.S. a Green b White (Non-polarized) c x 3/4" R.H.P.M.S. Requires additional hole see step 11. (Standard mortise cylinder supplied.) d e "MS" (MICRO SWITCH) OPTION: "MS" option allows monitoring of touch bar during normal operation, or can be used as a signal switch for horn, light etc. Comes standard with (2) two micro switches. Both can be wired either Normally Open or Normally Closed. Can be added to device after installation. Black Common Green Normally Open Red Normally Closed Note: Normal switch position shown, once installed normally open and closed positions are reversed. c2 b2 e * SPDT,.5 28VDC max. d b1 c1 a f *NOTE: Use caution when cutting touch bar and rail to length. Requries additional hole see step 11. NOTE: Touch bar must be in dogged down position, to remove the rear filler panel. 10

12 OPTIONS "DE" (DELAYED EGRESS) OPTION: Note: Refer to DE9000 Series Installation Instructions for addtional instructions for installation and operation of the "Delayed Egress" exit device. 85 Decibel Alarm - Standard LED Status Indicator - Standard Nuisance Alarm - Standard Key Switch Control - Standard Remote Authorized Egress - Standard Remote Re-Arm - Standard Remote Bypass - Standard Door Position Input - Standard, DIP Switch Setting Auto Reset or Manual Reset, DIP Switch Setting Auto - Standard (Manual - in CA) Additional Form "C" Relays For Optional Horn etc. (Rated 1 30 vdc) DE9700 REQUIRES DORMA ES VDC POWER SUPPLY. One supply per device unless the optional ES101 Time Delay is used to sequence the arming of the two devices. Easily accessible slide in and out electronics. Meets UL & ANSI/BHMA requirements. SIZE AA: Will fit 48" door opening without cutting. Can be cut to fit a 39 1/2" minimum door opening. SIZE BB: Will fit 36" door opening without cutting. Can be cut to fit a 32" minimum door opening. NOTE: Some CA Codes may require different verbiage; check local code requirements prior to installing decal. Minimum 18 AWG wire recommended for 24VDC inputs (red & black) leads. Control Inputs DPS Monitoring Outputs Grey Black DORMA ES105 (Power Transfer "Required") (12) Wire Connection Bundle 22" in length. Maximum Wire Length From Power Supply To Device & Back To Supply In Feet x Wire Gage/Size WIRE 18AWG 16AWG 14AWG 12AWG FEET * For 24VDC inputs only (red & black wires). Note: Wire run is from supply to device and back to the supply. 11 BLACK: (-) 24VDC IN RED: (+) 24VDC IN WHITE: AUTHORIZED EGRESS/AUTO RESET ORANGE: BYPASS/RE-ARM GREY: DPS N/C VIOLET: ALARM RELAY COMMON GREEN: RED OUTPUT EMITTER BROWN: RED OUTPUT COLLECTOR BLUE: GREEN OUTPUT EMITTER YELLOW: GREEN OUTPUT COLLECTOR PINK: ALARM RELAY N/C TAN: ALARM RELAY N/O

13 RETROFIT FROM EXISTING 5300 TO NEW 9700 MODEL LHR Existing vertical ref. line (Center line of chassis) 1 1/2" max. When using trim with outside cylinder. Outside face only. 1 3/4" 11/16" 1" Dia. max. thru door for spindle Existing horizontal ref. line Existing Holes Outside face DO NOT SCALE Additional installation instructions: New "Z" trim required if using trim. Existing strike may or may not have to be adjusted or relocated and replaced. Install chassis assembly to door, install end cap bracket to door, hold touch bar and rail assembly in position aligning screw holes in rail with mounting screw location of chassis, mark a line on rear of rail where front edge of end cap bracket is then cut touch bar and rail assembly to length. Install touch bar and rail to door then install all covers. 12

14 LHRB VERTICAL REF. LINE (CENTERLINE OF CHASSIS) A B C D RHRB VERTICAL REF. LINE (CENTERLINE OF CHASSIS) A B C D EXIT DEVICE 9700/F9700 SERIES OUTSIDE FACE ONLY OUTSIDE FACE ONLY H H F9700 ONLY B C G NOTE: FOR CYLINDER ONLY FUNCTION SEE PAGE 4 HORIZONTAL REFERENCE LINE G B C F9700 ONLY F9700 ONLY B C Drawing Not To Scale Use for Reference Only B C F9700 ONLY A B A B C D A FOR WOOD DOOR No. 25 DRILL 1" DEEP B FOR METAL DOOR No. 16 DRILL TAP C FOR SEX BOLT 3/8" DIA. HOLE THRU DOOR D FOR USE WITH TRIM 3/8" DIA. HOLE THRU DOOR G FOR KNOB/LEVER/THUMBTURN 1" DIA. OUTSIDE FACE 1/2" DIA. INSIDE FACE H FOR KNOB/LEVER/THUMBTURN 1" DIA. OUTSIDE FACE 1 1/2" DIA. x 1 3/4" HIGH FOR CYLINDER CLEARANCE C D T9700 4/2010

9700FL SERIES PANIC LATCH

9700FL SERIES PANIC LATCH 95062906 I9700FL-1 8/2011 9700FL SERIES PANIC LATCH Index: Screw chart Tools required Rim "cylinder only" option Fixing instructions Options AD4300 retro fit Fixing template 2 3 4 5-9 10-12 13 14 Note:

More information

9400/F9400 SERIES SURFACE VERTICAL ROD EXIT DEVICE

9400/F9400 SERIES SURFACE VERTICAL ROD EXIT DEVICE INSTLLTION INSTRUTIONS 9400/F9400 SERIES SURFE VERTIL ROD EXIT DEVIE Index: Screw chart Tools required Device installation Optional bottom strikes Rod cutting Rod extension Popper details Options Latch

More information

DORMA Gmbh + Co. KG Postfach 4009 D Ennepetal Telefon (02333) 7930

DORMA Gmbh + Co. KG Postfach 4009 D Ennepetal Telefon (02333) 7930 1 DG 0 89 I x x x x 1 1 02 /1 1 T 0 05 9 Index: Screw chart Tools required Glass preperation Outside trim options Device installation Optional bottom strikes Rod cutting Rod ext ension Cy linder dogging

More information

Spectra Class. N6000 Series Exit Devices SECURITY DOOR CONTROLS. N6100 Rim Mount Exit Device. N6200 Surface Vertical Rod Exit Device.

Spectra Class. N6000 Series Exit Devices SECURITY DOOR CONTROLS. N6100 Rim Mount Exit Device. N6200 Surface Vertical Rod Exit Device. N6000 Series Exit Devices Spectra Class Rim Mount Surface Vertical Rod N6100 Rim Mount Exit Device For use on single doors or pair of doors with mullion 1-3/4"(44 mm) door thickness standard. Specify thickness

More information

RELIANT 5000 SERIES: EXIT DEVICES. Reliant 5000 Series. Exit Devices. Strength by design. Simply PRECISION

RELIANT 5000 SERIES: EXIT DEVICES. Reliant 5000 Series. Exit Devices. Strength by design. Simply PRECISION RELIANT 5000 SERIES: EXIT DEVICES Reliant 5000 Series Exit Devices Strength by design. Simply PRECISION TABLE OF CONTENTS Exit Devices & Trims Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 Mullions

More information

Electrical Options Booklet. Table of Contents

Electrical Options Booklet. Table of Contents *24228413* 24228413 Electrical Options Booklet Table of Contents EL Wiring... EL Troubleshooting... SD/EL 98/99 Cylinder Dogging... SS Wiring... 330, 350, RX-330 and RX-350 Push Bar Trim Mechanical Installation...

More information

9300/F9300 SERIES RIM EXIT DEVICE

9300/F9300 SERIES RIM EXIT DEVICE INSTALLATION INSTRUCTIONS 9300/F9300 SERIES RIM EXIT DEVICE 1135-27 www.dorm-us.om 1-800-523-8483 I9300-9 4/08 HANDING RHR LHR RHR LHR RHR LHR RHR LHR TYPICAL INSTALLATIONS 9300 9300 9300 9300 9400 9300

More information

CAL-ROYAL & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156.

CAL-ROYAL & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156. CAL-ROYAL P R O D U C T S, I N C. 3 HOUR FIRE RATED 2200 & F2200 Rim Type Panic And Fire Exit Devices 2260 & F2260 Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 1 Lifetime Warranty BHMA CERTIFIED

More information

EXIT DEVICES Reliant 5000 Series

EXIT DEVICES Reliant 5000 Series PRECISION HARDWARE EXIT DEVICES Reliant 5000 Series GENERAL INFORMATION TABLE OF CONTENTS EXIT DEVICES & TRIMS Page Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 MULLIONS Fire Labeled Removable

More information

S6100 SERIES REVERSIBLE PANIC/FIRE EXIT RIM DEVICES INSTALLATION INSTRUCTIONS

S6100 SERIES REVERSIBLE PANIC/FIRE EXIT RIM DEVICES INSTALLATION INSTRUCTIONS 801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com S6100 SERIES REVERSIBLE PANIC/FIRE EXIT RIM DEVICES INSTALLATION INSTRUCTIONS These instructions

More information

*D-1015* D PARTS CHECK F-XX-V & XX-V EXIT DEVICES INSTALLATION INSTRUCTIONS. Customer Service

*D-1015* D PARTS CHECK F-XX-V & XX-V EXIT DEVICES INSTALLATION INSTRUCTIONS. Customer Service *D-1015* D-1015 2) TO CHANGE FROM STANDARD LOCKING TRIM TO EITHER NIGHTLATCH FUNCTION OR BLANK ESCUTCHEON, FOLLOW THE PROCEDURE BELOW: A) FOR NIGHTLATCH FUNCTION: 1) REMOVE AXLE SUPPORT ASSEMBLY (WITH

More information

5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2

5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2 5000 & F5000 Rim Type Panic And Fire Exit Devices 5000V & F5000V Vertical Rod Panic And Fire Exit Devices ANSI A156.3, Grade 2 Features & Construction ANSI A156.3, Grade 2 heavy duty exit device in surface

More information

8000 Series. Grade 1 exit device. Equia nestotatus enis 2015

8000 Series. Grade 1 exit device. Equia nestotatus enis 2015 8000 Series Grade 1 exit device Equia nestotatus enis 2015 Lecest Suntur Orem fuga Equia nestotatus Disciisi nisquissus Nequisi Voloreptatae Consecumque soloribus Iminveria volorum dormakaba 8000 Grade

More information

Spectra Class - Specification Grade Exit Devices for superior Architectural Style & Performance

Spectra Class - Specification Grade Exit Devices for superior Architectural Style & Performance S6000 & N6000 Spectra Exit Devices Spectra Class - Specification Grade Exit Devices for superior Architectural Style & Performance The new mechanical SDC S6000 & N6000 Spectra series panic and fire rated

More information

INSTALLATION INSTRUCTIONS CRL JACKSON 2085E

INSTALLATION INSTRUCTIONS CRL JACKSON 2085E INSTALLATION INSTRUCTIONS CRL JACKSON 2085E ELECTRIC LATCH RETRACTION CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com

More information

20 Series. Exit Device

20 Series. Exit Device 20 Series Exit Device Copyright 2003, 2007, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Table Of Contents Page Features, Applications and UL

More information

ADDITIONAL INFORMATION

ADDITIONAL INFORMATION ADDITIONAL INFORMATION How to Order Sequence Example Prefixes CD AE DM KOR LK LM ED Rating F Blank Cylinder Dogging Touchbar Request to Exit Latchbolt and Device Monitor Switch Key Bypass Switch Locking

More information

Table Of Contents. 30 Series Exit Device. On The Cover

Table Of Contents. 30 Series Exit Device. On The Cover 30 Series Exit Device Copyright 1999, 2001, 2004, 2008, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table Of Contents Page Features, Applications and UL Fire

More information

Recessed. Touch bar exit devices

Recessed. Touch bar exit devices Recessed Touch bar exit devices Table of contents 3 2390 Concealed vertical rod device 4 Accessories 5 Power supply 6 Door application 7 How to order The Falcon difference Safety, security and uncompromising

More information

ADDITIONAL INFORMATION

ADDITIONAL INFORMATION ADDITIONAL INFORMATION How to Order Sequence Example Prefixes CD AE DM KOR LK LM ED Rating F Blank Cylinder Dogging Touchbar Request to Exit Latchbolt and Device Monitor Switch Key Bypass Switch Locking

More information

4000 Series Exit Devices Premier Product

4000 Series Exit Devices Premier Product 4 4000 Series Exit Devices Premier Product Certification & Compliance: u ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.

More information

*ININST.1002* 1690 Touchbar. Index:

*ININST.1002* 1690 Touchbar. Index: *ININST.1002* ININST.1002 Concealed Vertical Rod Panic Device 1690 Touchbar Installation Instructions Index: : The door prep for the 1690 Hex Bottom Rod is different than for the RL bottom rod. Please

More information

Standard Plastic Template P/N: (3-0) P/N: (4-0)

Standard Plastic Template P/N: (3-0) P/N: (4-0) 101293 November 12, 2010 Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045 (830)629-2900 / 1-800-729-3839 / Fax (830)620-6711 E-MAIL: detex@detex.com INTERNET: www.detex.com INSTALLATION

More information

GRADE 1 ELECTRIFIED CYLINDRICAL & UNIT LOCKS

GRADE 1 ELECTRIFIED CYLINDRICAL & UNIT LOCKS GRADE ELECTRIFIED CYLINDRICAL & UNIT LOCKS LAK Function: Specifications: Features: Locked on the outside only. The 00mA @ VDC Vandal resistant clutch lever release inside lever is always unlocked for 9/6

More information

626F Exit Device Trim Installation Instructions

626F Exit Device Trim Installation Instructions 626F Exit Device Trim Installation Instructions For use with all Yale 7000, 2100, 1800 and 1500 Series Exit Devices (Wood and Metal Doors) Attention Installer Any retrofit or other field modification to

More information

Table of Contents 20 Series Exit Device

Table of Contents 20 Series Exit Device 20 Series Exit Device Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Features, Applications and UL Fire Door Ratings...

More information

Dor-O-Matic Exit Devices

Dor-O-Matic Exit Devices Dor-O-Matic Exit Devices T H E F A L C O N D I F F E R E N C E S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet

More information

1 of 6. Installation Instructions. ED3200/ED3200A Series Rim Exit Device ASSA ABLOY. Plug FM362 (05/15) Inactive Case. Chassis. Inactive Case.

1 of 6. Installation Instructions. ED3200/ED3200A Series Rim Exit Device ASSA ABLOY. Plug FM362 (05/15) Inactive Case. Chassis. Inactive Case. Installation Instructions ED3200/ED3200A Series Rim Exit Device In U.S.: Corbin Russwin, Inc. 225 Episcopal Road Berlin, CT 06037 USA www.corbinrusswin.com In Canada: Door Security Solutions Canada 160

More information

Endcap P/N: Pushpad Wrap P/N: X (3-0) P/N: X (4-0)

Endcap P/N: Pushpad Wrap P/N: X (3-0) P/N: X (4-0) 101275 November 12, 2010 Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045 (830)629-2900 / 1-800-729-3839 / Fax (830)620-6711 E-MAIL: detex@detex.com INTERNET: www.detex.com INSTALLATION

More information

An ASSA ABLOY Group brand Series. Flatbar Exit Devices

An ASSA ABLOY Group brand Series. Flatbar Exit Devices An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices introduction Yale 1800 series exit devices are the ideal choice for economy commercial applications where consistent quality, ease of use and

More information

98/99 Dogging options

98/99 Dogging options 98/99 Dogging options CDSI/HDSI dogging indicators Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible LOCKED and UNLOCKED indicators show whether

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

Recessed. Exit Device Series

Recessed. Exit Device Series Recessed Exit Device - 2390 Series Table of Contents 2390 Concealed Vertical Rod Device 3 Accessories 4 Power Supply 5 Door Application 6 How To Order 7 F A L C O N E X I T D E V I C E S Architectural

More information

*ININST.1039* 2390 Touchbar

*ININST.1039* 2390 Touchbar *ININST.1039* ININST.1039 Concealed Vertical Rod Panic Device 2390 Touchbar Installation Instructions Index Parts List... 2 Before Installation... 5 Installation... 5 RX Device Wiring... 12 EL Device Wiring...

More information

ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device

ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device Surface Vertical Rod Features ED5470 Panic-Listed Surface Vertical Rod Exit Device ED5470B 1-1/2 Hour Fire-Listed Surface Vertical Rod Exit Device Features Handing Device is handed but easily field reversible.

More information

22 Series Exit Devices

22 Series Exit Devices 22 Series Exit Devices 22 Exit Device Finishes Color US Number BHMA Number Sprayed Aluminum SP28 689 Sprayed Dark Bronze SP313 695 2005 Ingersoll-Rand Co. May be copied for use with specification submittal.

More information

Sprayed Finishes: Aluminum: 689. Bronze: 691 (Dull) or 695 (Dark Duranodic). Gold: 696.

Sprayed Finishes: Aluminum: 689. Bronze: 691 (Dull) or 695 (Dark Duranodic). Gold: 696. DORMA 9000 Exit Device DORMA s 9000 Series heavy-duty exit devices provide superior durability for high impact applications such as schools, universities, and other institutional or commercial buildings.

More information

APEX 2000 SERIES: TOUCHBAR EXIT DEVICES. Apex 2000 Series. Touchbar Exit Devices. Strength by design. Simply PRECISION

APEX 2000 SERIES: TOUCHBAR EXIT DEVICES. Apex 2000 Series. Touchbar Exit Devices. Strength by design. Simply PRECISION APEX 2000 SERIES: TOUCHBAR EXIT DEVICES Apex 2000 Series Touchbar Exit Devices Strength by design. Simply PRECISION TABLE OF CONTENTS Wide Stile Exit Devices & Trims Rim Devices...4, 5 Surface Vertical

More information

33A/35A Series Exit Devices

33A/35A Series Exit Devices 33A/35A Series Exit Devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part

More information

ADAMS RITE. ADAMS RITE MANUFACTURING COMPANY Sliding Hardware/Exit Devices Series Turns

ADAMS RITE. ADAMS RITE MANUFACTURING COMPANY Sliding Hardware/Exit Devices Series Turns Sliding Hardware/ 1000 Series Turns Series 1000 turns are designed to operate Adams Rite MS 1847 deadlocks and latches. 1000-11 and 1000-21 have a rectangular escutcheon for mounting directly on the door.

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Built to protect Von Duprin products symbolize a commitment to safety and security. It s evident in the meticulous engineering behind every exit device. After all, keeping

More information

33A/35ATM. Series. Exit Devices

33A/35ATM. Series. Exit Devices 33A/35ATM Series Exit Devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical

More information

Adams rite. Exit Devices & parts exit devices series exit device parts

Adams rite. Exit Devices & parts exit devices series exit device parts Adams rite Exit Devices & parts exit devices 8099 8211 8099 Active Dummy Bar with Switch Can be wired normally open or normally closed to operate maglock, alarm, etc No latching mechanism 8211 Surface

More information

Olympian 100, 200, 300 Series

Olympian 100, 200, 300 Series OLYMPIAN 100, 200, 300 SERIES : EXIT DEVICES Olympian 100, 200, 300 Series Exit Devices Strength by design. Simply PRECISION TABLE OF CONTENTS Exit Devices & Trims Rim Devices...4, 5 Surface Vertical Rod

More information

S6000 Spectra Exit Devices

S6000 Spectra Exit Devices S6000 Spectra Exit Devices SPECTRA CLASS - SPECIFICATION GRADE EXIT DEVICES FOR SUPERIOR ARCHITECTURAL STYLE & PERFORMANCE The new mechanical SDC S6000 Spectra Series panic and fire rated exit devices

More information

Concealed Vertical Rod Features

Concealed Vertical Rod Features Concealed Vertical Rod Features ED5800 Panic-Listed Concealed Vertical Rod Exit Device ED5800A 3-Hour Fire-Listed Concealed Vertical Rod Exit Device FOR USE WiTH METAL DOORS OnLy Features Handing Device

More information

Entry. Entry. Entry. Entry

Entry. Entry. Entry. Entry Functions x 9800/9M800 AC2 Exit Device Outside Inside Series/Function Type Function Description ED5200(A) & ED5200S(A) *9833 Without Cylinder Outside lever locked (freewheeling) except when in passage

More information

EXIT DEVICES Apex 2000 Series

EXIT DEVICES Apex 2000 Series PRECISION HARDWARE EXIT DEVICES Apex 2000 Series GENERAL INFORMATION TABLE OF CONTENTS WIDE STILE EXIT DEVICES & TRIMS Page Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 Mortise Devices...8, 9

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Openings 85 to 0 or to 70 Double Lever Arm Application for Frame Reveals (76) to 7 (78mm)* Stop (Push) Side of Installation 5700 LEO Operator Installation Instructions

More information

* * E996L Series. E996L for Rim/Vertical. E996L for Mortise CAUTION

* * E996L Series. E996L for Rim/Vertical. E996L for Mortise CAUTION *921297-00* 921297-00 Electric Locking Trim E996L Series Installation Instructions CAUTION Product is shipped in Fail Safe (FS) configuration. Fail Safe configuration is required by code in some applications

More information

22 Series Exit Devices

22 Series Exit Devices 22 Series Exit Devices 22 Exit Device Finishes Color US Number BHMA Number Sprayed Aluminum SP28 689 Sprayed Dark Bronze SP313 695 2005 Ingersoll-Rand Co. May be copied for use with specification submittal.

More information

PRICE LIST. Table of Contents

PRICE LIST. Table of Contents PRICE LIST Table of Contents 3600 Concealed Vertical Rod... 2-3 3700 Rim Latching... 3-4 Electrical Latching Kits... 4 Power Supplies... 4 Power Transfers... 4 Exit Device Accessories... 5 Inactive Devices...

More information

OLYMPIAN 100, 200, 300 SERIES PRECISION HARDWARE

OLYMPIAN 100, 200, 300 SERIES PRECISION HARDWARE OLYMPIAN 100, 200, 300 SERIES PRECISION HARDWARE GENERAL INFORMATION TABLE OF CONTENTS EXIT DEVICES & TRIMS Page Rim Devices...4, 5 Surface Vertical Rod Devices...6, 7 Mortise Devices...8, 9 MULLIONS Fire

More information

Table of Contents 30 Series Exit Device

Table of Contents 30 Series Exit Device 30 Series Exit Device Table of Contents Features, Applications and UL Fire Door Ratings... 1 3727/ NB3727 Vertical Rod Type Exit Device... 2 3828 Rim Type Exit Device...3 30 Series Trims....4 Alternate

More information

SPECTRA S6000 TOUCH BAR EXIT DEVICES Discount Code XK

SPECTRA S6000 TOUCH BAR EXIT DEVICES Discount Code XK SPECTRA S6000 TOUCH BAR EXIT DEVICES Panic & Fire Rated ANSI / BHMA Grade 1 SDC S6000 Spectra series panic and fire rated exit devices are available in rim mount, mortise and surface vertical rod configurations.

More information

Motorized Electric Latch Retraction

Motorized Electric Latch Retraction ; SECTION I: OVERVIEW 1. Description The Corbin Russwin MELR Electric Latch Retraction (ELR), refer to Figure 1, works with ED4000 & ED5000 Series exit devices to provide remote-controlled latch retraction

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Door Openings 85 to 0 or to 80 Adjustable Arm and Slide Track Application Maximum Hinge Side Frame Reveal to /8 (mm) Hinge (Pull) Side of Door Installation 5700 LEO

More information

56- Electric Latch Retraction Exit Devices Installation and Wiring Instructions

56- Electric Latch Retraction Exit Devices Installation and Wiring Instructions SECTION I: OVERVIEW 1. Description The Sargent 56- prefix ELR works with 80 Series exit devices to provide remote-controlled latch retraction. It is compatible with the following prefixes: 53 - Latchbolt

More information

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series

X Series. Features. comparison chart. Lock type. Glossary and finish chart. MA Series. RU Series Lock type finish chart MA X Grade 1, heavy-duty cylindrical knob locks RU T When you need a tough, reliable lock that can also withstand the corrosive conditions of a marine environment you need a Falcon

More information

ABS-AMERICAN BUILDING SUPPLY, INC. Von Duprin

ABS-AMERICAN BUILDING SUPPLY, INC. Von Duprin 22 - Rim Device 22 rim device for all types of single and double doors with mullion, UL listed for accident hazard installations. Covers stock hollow metal doors with 161 cutouts. Fits door stiles as narrow

More information

Heavy-Duty Commercial Grade 1 Rim Exit Devices

Heavy-Duty Commercial Grade 1 Rim Exit Devices 8300 SERIES Heavy-Duty Commercial Grade 1 Rim Exit Devices Standard Features n Performance Complies with ANSI A156.3, 1994, Grade 1, UL/ULC listed n Rail Fits 28" to 36" doors n Latch Stainless steel 5/8"

More information

lkm7001 key override module Installation Instructions Converting The LKM7000 to The LKM7003

lkm7001 key override module Installation Instructions Converting The LKM7000 to The LKM7003 lkm7001 Instructions Converting The LKM7000 to The LKM7003 key override module In A Single Motion, We ll Change The Way You Think About Security Read Instructions thoroughly prior to installation Base

More information

5/8" Radius Corner Hinges

5/8 Radius Corner Hinges 5/8" Radius Corner Hinges FULL MORTISE 5 Knuckles Removable Pin Steel with Steel Pin Non-Template Pack with Phillips flat-head screws (machine and wood) H44-50R SPRING HINGE UL Listed Steel with Steel

More information

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20 Exit Devices Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy

More information

TS93 EMF T/PT/TDE. Surface applied door closer

TS93 EMF T/PT/TDE. Surface applied door closer TS9 EMF T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer (no smoke detector) (EMF T) Push side track mount closer (no smoke detector) (EMF PT) Double egress

More information

33A/35A Series. Exit devices

33A/35A Series. Exit devices 33A/35A Series Exit devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part

More information

SPECTRA S6000 Touch Bar Exit Devices - RIM and SURFACE VERTICAL

SPECTRA S6000 Touch Bar Exit Devices - RIM and SURFACE VERTICAL SPECTRA S6000 Touch Bar - RIM and SURFACE VERTICAL Panic & Fire Rated ANSI / BHMA Grade 1 SDC S6000 Spectra Series panic and fire rated exit devices are available in rim mount, mortise and surface vertical

More information

INSTALLATION GUIDE. High Security Pedestrian Exit Device with Electric Locking Trim

INSTALLATION GUIDE. High Security Pedestrian Exit Device with Electric Locking Trim INSTALLATION GUIDE High Security Pedestrian Exit Device with Electric Locking Trim WARNING: Kaba Mas locks are well protected from Electrostatic Discharge (ESD) damage once they are installed, but can

More information

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY 00 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) Track Assembly (0-) / Replacement

More information

33A/35A Series. Exit devices

33A/35A Series. Exit devices 33A/35A Series Exit devices Introduction Invest in longevity Von Duprin devices are engineered to add value over time. The robust materials and unique engineering add to the longevity, while the flexible

More information

8500 Narrow Design Rim Exit Device 80 Series

8500 Narrow Design Rim Exit Device 80 Series 8500 Narrow Design Rim Exit Device 8500 Series Narrow Design Rim Exit Device Specifications for 8500 Series Exit Door Types Rail sizes as determined by door width Strike Dogging Feature Electric Mounting

More information

9827/9927 Surface mounted vertical rod device. 9827/9927 Surface mounted vertical rod device. Specifications Device functions

9827/9927 Surface mounted vertical rod device. 9827/9927 Surface mounted vertical rod device. Specifications Device functions Top latch 299 Top strike for all types of single or double doors, UL listed for panic exit hardware. Devices are ANSI A56.3 200 Grade. Covers stock hollow metal doors with 86 or 6 cutouts. The 9827 device

More information

EXIT DEVICES. philihardware.com

EXIT DEVICES. philihardware.com EXIT DEVICES philihardware.com UL Introduction GENEAL INFOMATION ADVANTAGE exit devices are designed and manufactured in accordance to ISO9001 QMS and certified by BHMA. All ADVANTAGE exit devices are

More information

ASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device

ASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device Overhead Concealed Closer Holder Releasing Device with Rigid Slide Arm For wood or metal doors 1-3/4 to 2-1/4" (45-57mm) thick Hung in a hollow metal frame Standard butt hinges Typical Installation One

More information

CAL-ROYAL & F9800 Rim Type Panic And Fire Exit Devices 9860 & F9860 Vertical Rod Panic And Fire Exit Devices ANSI A156.

CAL-ROYAL & F9800 Rim Type Panic And Fire Exit Devices 9860 & F9860 Vertical Rod Panic And Fire Exit Devices ANSI A156. Cal-Royal(3/08)new_9800 4/16/2008 11:57 AM Page 1 CAL-ROYAL P R O D U C T S, I N C. 3 HOUR FIRE RATED 9800 & F9800 Rim Type Panic And Fire Exit Devices 9860 & F9860 Vertical Rod Panic And Fire Exit Devices

More information

0 Series. 9Exit Device

0 Series. 9Exit Device 0 Series 9Exit Device Copyright 2006, 2009-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Features, Applications and UL Fire Door Ratings...1 9800

More information

ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG

ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG ARCHITECTURAL DOOR HARDWARE EXIT DEVICE CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index EXIT DEVICES 5000 Series (Grade 2)...1-10

More information

PD10-M-RIM INSTALLATION INSTRUCTIONS. The PD10-M-RIM is a storefront grade 1 exit device equipped with motor drive latch retraction.

PD10-M-RIM INSTALLATION INSTRUCTIONS. The PD10-M-RIM is a storefront grade 1 exit device equipped with motor drive latch retraction. PD10-M-RIM INSTALLATION INSTRUCTIONS The PD10-M-RIM is a storefront grade 1 exit device equipped with motor drive latch retraction. Retrofits Doromatic 1790 & First Choice 3790. B. G. A. C. D. E. F. PD10-M-RIM

More information

M-Series Service Manual

M-Series Service Manual M-Series Service Manual Table of Contents Introduction... 1-2 Functions... 3-5 Replacement Parts for Early LM Series Lever Trim... 6 Trim Assemblies... 7-11 Falcon LM Series Mortise Trim... 7 Falcon L-900

More information

* * Maintenance Kit

* * Maintenance Kit *941079-00* 941079-00 Maintenance Kit Page: TOC-1 Table of Contents Description: Page Number: Pictorial Index to Parts (immediatey follows Table of Contents )...PIP-1, PIP-2 1. Center Case Parts Insert-98/99

More information

Exit Devices Rainer Security Products Ltd

Exit Devices Rainer Security Products Ltd Exit Devices Rainer Security Products Ltd Unit B6, Rudford Industrial Estate, Ford, Arundel, West Sussex BN18 0BF +44 (0) 190 72211 rainersecurity.co.uk sales@rainersecurity.co.uk 2 S1150 & S1250 Series

More information

Installation and Wiring Instructions for the TL- Prefix SARGuide Illuminated Touchpad for 80 Series Exit Devices to ElectroLynx Connector System

Installation and Wiring Instructions for the TL- Prefix SARGuide Illuminated Touchpad for 80 Series Exit Devices to ElectroLynx Connector System Installation and Wiring Instructions for the TL- Prefix SARGuide Illuminated Touchpad for 80 Series Exit Devices to ElectroLynx Connector System U.S. Patent No. 7,04,050 For assistance, contact SARGENT

More information

KEANE MONROE a member of the record group

KEANE MONROE a member of the record group SERIES 3000 / 3100 MICROPROCESSOR CONTROL REGULAR ARM SLIDE ARM / SLIDE ARM W/PANIC BREAKAWAY SERIES 3000 / 3100 Page 1. INDEX and OPERATOR HANDING The KM Series 3000/3100 operators have been carefully

More information

22 Series. Exit device

22 Series. Exit device 22 Series Exit device Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin

More information

1500 Series and 1600 Series Electric Strikes Installation Instructions

1500 Series and 1600 Series Electric Strikes Installation Instructions 1500 Series and 1600 Series Electric Strikes Installation Instructions 1 NOTE: Installation wiring for the product and wiring methods shall be in accordance with the National Electrical Code, ANSI/NFPA

More information

TABLE OF CONTENTS StrikeForce Electric Strikes MAX HOLD Electromagnetic Locks Electrical Accessories Additional Information

TABLE OF CONTENTS StrikeForce Electric Strikes MAX HOLD Electromagnetic Locks Electrical Accessories Additional Information TABLE OF CONTENTS StrikeForce Electric Strikes............................ 4-3 Series 6000 Electric Strikes........................... 4-3 Strikes for Rim Exit Devices.......................... 5-6 Strikes

More information

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY 0 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) / Replacement Motor Key (00KEY) Rod

More information

KAWNEER 1686 CONCEALED EXIT DEVICE

KAWNEER 1686 CONCEALED EXIT DEVICE FEBRUARY, 2015 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl

More information

Exit Devices TABLE OF CONTENTS. Top or Bottom Rod Replacement Kit Trim Handing Pin... 43

Exit Devices TABLE OF CONTENTS. Top or Bottom Rod Replacement Kit Trim Handing Pin... 43 Exit Devices TABLE OF CONTENTS A Accessories, 4500 Series Grade 1 Alarm Kit... 25 Alarm Kit Latchbolt Monitor Switch... 28 Alarm Kit Tamper Switch... 29 Concealed Vertical Rod Bottom Latch Assembly...29

More information

Corbin Russwin. Latches, cylinders, interchangeable CORE & spindle. Latches. Lockset Cylinders. Rim Cylinders. Interchangeable Core.

Corbin Russwin. Latches, cylinders, interchangeable CORE & spindle. Latches. Lockset Cylinders. Rim Cylinders. Interchangeable Core. Latches Corbin Russwin Latches, cylinders, interchangeable CORE & spindle Mfg # Series Backset EZ # 486F90 626 4200 2-3/4 035270 Lockset Cylinders Mfg # Series Keyway EZ # 2000 052 59A1 626 4200, 5200

More information

Door control and security hardware

Door control and security hardware Door control and security hardware Introduction Since pioneering the first exit device in 908, Von Duprin life safety products have provided unparalleled quality, performance and flexibility for schools,

More information

1500 Series and 1600 Series Electric Strikes Installation Instructions

1500 Series and 1600 Series Electric Strikes Installation Instructions 1500 Series and 1600 Series Electric Strikes Installation Instructions 1 NOTE: Installation wiring for the product and wiring methods shall be in accordance with the National Electrical Code, ANSI/NFPA

More information

Installation Guide(s)

Installation Guide(s) FCC Part 15 Transmitter Certification Test Report FCC ID: SPI-4XXKPMR FCC Rule Part: 15.09 ACS Report Number: 05-070-15C Manufacturer: Single Access Lock Inc. Model: 4XXKP/MR Installation Guide(s) 5015

More information

8888/8810 Multi-Function Rim Exit Device & Trim 80 Series

8888/8810 Multi-Function Rim Exit Device & Trim 80 Series 8888/8810 Multi- Rim Exit Device & Trim The 8888/8810 Rim Exit Device Devices are A156.3 UL Fire and Panic listed Device is non-handed /BHMA architectural finishes Four standard sizes available To Order:

More information

6000ED Series Commercial Exit Devices. An ASSA ABLOY Group brand

6000ED Series Commercial Exit Devices. An ASSA ABLOY Group brand 6000ED Series Commercial Exit Devices An ASSA ABLOY Group brand Table of Contents Introduction...3-4 Benefits and Features...5 Finishes...6 How To Order...7 6100ED(F) Rim...8 6150ED(F) SquareBolt...9 6170ED(F)

More information

KAWNEER 1686 EL CONCEALED EXIT DEVICE

KAWNEER 1686 EL CONCEALED EXIT DEVICE FEBRUARY, 2012 1 ROD AND CENTER CASE ASSEMBLY: 1) For inactive doors or doors without exterior cylinder, or doors without the need for exterior cylinder dogging, the removal of the cylinder dogging pawl

More information

33A/35A Series. Exit devices

33A/35A Series. Exit devices 33A/35A Series Exit devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part

More information

ASSA ABLOY Series Multi-Point Hold Open Installation and Instruction Manual

ASSA ABLOY Series Multi-Point Hold Open Installation and Instruction Manual Pull Side Applications with Slide Track (7210, 7250) (see page 7 for template) 7200 Series Multi-Point Hold Open Installation and Instruction Manual 3 1 Push Side Applications with Double Lever Arms (7220,

More information

8800 Rim Exit Device 80 Series

8800 Rim Exit Device 80 Series 8800 Rim Exit Device 8800 Series Rim Exit Device 8800 Features Designed for standard width stile applications on wood and metal doors Also available as an HC8800 or WS8800 for hurricane-resistant applications,

More information