DRIVING, MECHANICAL & KNOWLEDGE, CRITIQUE SHEET 1 - R18 SAN ANTONIO JAM TRACTOR RESTORATION SHOW

Size: px
Start display at page:

Download "DRIVING, MECHANICAL & KNOWLEDGE, CRITIQUE SHEET 1 - R18 SAN ANTONIO JAM TRACTOR RESTORATION SHOW"

Transcription

1 DRIVING, MECHANICAL & KNOWLEDGE, CRITIQUE SHEET 1 - R18 Entry ID Class # TRACTOR YEAR MODEL Evaluation: E = Excellent, G = Good, F = Fair, P = Poor CF NA = Not Applicable Note: Found on Worksheets compiled by Team 3 1. Pre-check, Unloading, Safety Procedures & Safety Equipment 2. Fluid Levels & Tire inflation pressures Mechanical Tractor Driving - Maximum for Mechanical 6 Points. Safety Tractor Driving issues are recorded in Safety - Maximum 5 Points Eval Comments Starting in safe manner Operator should demonstrate familiarity with controls Good Driving Skills - Shifting gears etc. Clutch Includes smooth clutch action and clutch free travel Brakes Both brakes R & L will be checked and desirability of locking brakes together will be evaluated. Steering- Normal steering and wheel alignment. Wheel tracking will be observed. Slack in steering gears including tie rods will be observed Electrical Lights, Charging System Generator - Regulator Normal engine sound Normal governor action Good throttle movement when accelerating and moving to idle. Normal exhaust emissions. Original mufflers and exhaust systems. Lift System Weight will be put on lift arms to see how they function PTO Operation Proper shield should be in place CRITIQUE 1 - Driving, Mechanical & Knowledge - R18.doc Page 1 of 3

2 DRIVING, MECHANICAL & KNOWLEDGE, CRITIQUE SHEET 1 - R18 Mechanical 34 Pts (CF) Bonus Point may be awarded Tractor Driving 6 Pts Mechanical will be evaluated using: Observations - Driving Inspecting Documentation, Reports and Pictures see description below Evidence of using precision tools Micrometers, dial gauges, torque wrenches, small hole and telescoping gauges. Note: 1. Evidence that all threads were chased and proper torques applied. 2. No Sandblasting of Mechanical Parts. Any evidence of sand will result in points being deducted. Mechanical work done by others must be identified as RC in Expense Report Asking exhibitor/s questions. Responses can be used to evaluate Knowledge, share with Team 2 Engine Components 8 Pts Eval Comments Crank. Pistons, Rods & Cylinders Measuring crank and rod journals Measuring Cylinders conditioning cylinder walls Measuring Piston to Cylinder fit Checking Piston rings ring end gap and ring grooves. Torque of rod bolts Engine timing Cooling System Fans and drives inc belts Hoses and fittings Radiators drain plugs Head & Valve Train Inspection of head for cracks head flatness, head bolt torques. Valve stems & faces including face and seat angles and valve guide measurements Stem to valve guide fit. Measuring valve guides Rocker arm pads Valve springs height at prescribed lb/ft straightness Push rods Tappet clearance Lubrication Oil galleries and lines Oil pumps Fuel System Carburetor Systems including fuel pumps & fuel tanks Diesel Systems pumps, lines, filters and injectors Other Components Turbo Exhaust Governor CRITIQUE 1 - Driving, Mechanical & Knowledge - R18.doc Page 2 of 3

3 DRIVING, MECHANICAL & KNOWLEDGE, CRITIQUE SHEET 1 - R18 Components Eval Comments The following are also evaluated in the Driving Exercise Electrical (4 Pts) Regulators Generators/Alternators Ignition- magnetos /distributors (points condenser ) Coil, plugs and plug gap Instrument panel gauges Battery Wiring Harness Lights Transmission (4 Pts) Bearings Gear backlash Gear Run out Filters Gaskets Clutch (4 Pts) Clutch Free Travel Clutch throw out bearing Pilot Bearing Clutch Disc Final Drive (4 Pts) Bearings Gears Gaskets PTO/ Lift Hydraulics (4 Pts) Pump bearings & gears Lines Valves & controls Lift capacity PTO shaft category/splines Three point hitch category Steering (3 Pts) Gear Box Gear adjustment slack in steering wheel and front wheels. Tie Rods Toe in and camber Tracking Both front and rear wheels Brakes (3 Pts) Adjustment brakes adjusted so they can be locked together and equal braking on both rear wheels Pads and shoes Brake drum Seals CRITIQUE 1 - Driving, Mechanical & Knowledge - R18.doc Page 3 of 3

4 DOCUMENTATION, KNOWLEDGE & PRESENTATION CRITIQUE SHEET 2 - R18 CLASS YEAR MODEL ENTRY ID # TRACTOR Evaluation: E = Excellent, G = Good, F = Fair, P = Poor NA = Not Applicable DOCUMENTATION (15 EVAL COMMENTS PRESENTATION EVAL COMMENTS PTS) Three Ring Binder with Sequenced Dividers and pages numbered. See Premium List 24 E. Table of Contents (5 PTS) Showmanship Includes display and providing tools for judges to check fluid levels - also flash light and wiping cloths. Enthusiasm I. Tractor History & SN Articulate II. Restoration Summary. Confident III Reports a. Expense b. Service Repair IV. Ancillary & External Dress Eye Contact Components V. Engine KNOWLEDGE (10 Pts) Will be evaluated when reviewing Documentation VI. Transmission VII. Final Drive - could be labeled as Power Train and include Transmission & Final Drive VIII. Sheet Metal & Finish IX Rims & Tires X. Appearance could include IX,X,XI, Authenticity & Aesthetics XI Completed Tractor Could be included in II Restoration Summary XII. Tractor Specifications XIII. Research Materials with comments recorded in Comments Column adjacent to topic or recorded in this box. See Check Sheet 2 for additional explanation. Example comments - (V) engine good understanding of measurement of crank journals. Lacks understanding of using precision tools in measuring valve guides. Mechanical Judges will also evaluate Knowledge. Pictures included in IV XI and should be of technical activities examples, measuring crank journals with micrometer, piston ring end gap, valve guide diameter, etc. Pictures should be labeled/described with exhibitor s name/s and mechanical activities they are performing. Recommend two to four pictures per page. Please refer to Tractor Restoration Documentation & Research on WEB. CRITIQUE 2 -Documentation, Knowledge & Presentation - R18.doc

5 AESTHETICS, AUTHENTICITY & SAFTEY CRITIQUE SHEET 3 - R18 ENTRY ID# CLASS TRACTOR YEAR MODEL Evaluation: E = Excellent, G = Good, F= Fair, P=Poor Aesthetics(10 points) CF Points may be given Sheet Metal preparation Removing paint and rust plus metal repairs and prep. Sand Blasting of sheet metal, engine, transmission and differentials is discouraged. Any evidence of sand left from sand blasting will result in points deducted. When preparing and painting rims, Tires should be removed. Rust on inside of rims should be removed. Pictures in documentation should validate this. Paint & Finish Sealers, primers, and surface prep prior to painting Determining correct paint color code Paint, reducer, and catalyst ratio No evidence of body filler Paint Equipment Type of paint gun, filters, air pressure, air mask, etc. Detail, Completeness Components such as tires, rims, steering wheels, seats, decals, instrument panels, wiring harness, gauges, controls, Hose clips, rubber hose, belts, fuel lines, etc. Appearance Basic eye appeal No oil or grease EVAL NA = Not Applicable COMMENTS CRITIQUE 3 - Aesthetics, Authenticity & Safety - R18.doc Page 1 of 2

6 AESTHETICS, AUTHENTICITY & SAFTEY CRITIQUE SHEET 3 - R18 Authenticity (10 Points) EVAL COMMENTS Tractor to be as original as possible. Items to consider but are not limited to the following: Original unaltered serial plates part numbers should be compatible with serial number. Use of original restored parts is desirable over after market parts seats, steering wheels, gauges, sheet metal hoods, grills. Wheel, rims (cut offs are discouraged but allowed.) Tire size and tread should be similar to original. Paint and Paint Color Clear coating is not recommended. See Exceptions allowed to original factory painting schemes on Judges Summary Sheets See Additional Links on JAM for recommendations regarding paint color Fasteners Use original example square nuts and heads when original Electrical Systems Faces of gauges, benzyl & fonts. Generators should not be changed out with Alternators. Six volts should not be converted to 12 volt systems Wiring harness should be as original as possible Original Safety Shields & Equip Decals Proper size and fonts Exact location of decal Safety (10 Pts) EVAL COMMENTS Driving and Unloading 5 pts See Safety and Unloading Worksheet Driving is also evaluated in Mechanical Tire Inflation (checked when unloading) See Safety and Unloading Worksheet Safety Equipment 5 pts See Fluid Levels and Safety Equipment Worksheet CRITIQUE 3 - Aesthetics, Authenticity & Safety - R18.doc Page 2 of 2

7 DRIVING, MECHANICAL & KNOWLEDGE REFERENCE 1 R18 Entry ID Class # TRACTOR Year Mechanical Pts. / 40 Knowledge Pts /10 Team 2 is also evaluating Mechanical Pts and should share with Team 1 to record pts. SYSTEM Points COMMENTS Driving/Observations /6 pts Proper governor control. Tire inflation. Clutch and Brake operation. Listen for abnormal sounds. In addition to components evaluation when driving contestant may be instructed to demonstrate basic driving skills. Skills may include: starting, shifting gears, engaging PTO, hydraulic lifts, and turning on/off lights. Driving and backing tractor into a designated area, braking tractor and turning engine off and securing tractor in a safe mode prior to dismounting. Unloading procedure evaluated by Team 3 Complexity Factor (CF) Preliminary Driving Check List Notes Safe Driving Governor and Idle Speed Clutch Brakes PTO Hydraulic Lift Steering System Power Train Functions Abnormal noise / smoke etc. Fluid Levels - coolant, lub, trans, hyd. (Team 3) Fluid Leaks Air Filter (oil level if oil bath) Lights Safety items are addressed on Check Sheet 3 Engine /8 pts. For 7 to 8 pts, engine should have been disassembled, analyzed and new parts needed and gaskets and/or seals installed. Check Sub systems including: Lubricant and coolant levels, air filters and air intake, fuel, and exhaust. No signs of leaks. Any mechanical work, performed by others such as valve jobs should be identified in mechanics report with invoices in expense accounts. Any work done for no charge should be identified as (OC) opportunity costs in expenses report. Make evaluations on Knowledge as you inspect each topic. Electrical /4 pts To include lights, charging, cranking and ignition (magneto or distributor) systems including instrument panel and other controls and switches. All gauges must function properly and have correct colored faces with original fonts. Transmission /4 pts. For 3 to 4 pts must have been inspected and new gaskets and/or seals installed. Check Transmission lubricant level. No signs of leaks. Transmission to be put in different gears when driving for evaluation. Pictures should be labeled with exhibitor in them included documentation illustrating engine work being done. Measuring crank journals, cylinder taper and out of round, piston fit and ring end gap are examples. Using micrometers vs. plastic gauge for measuring crank journals. Pictures of head work including valves, valve train and valve guides are additional example of mechanical work to be validated with pictures. Activities shown in pictures should be identified with label on each picture. CF points may be given if tractor was tested on PTO dynamometer. There should be no evidence of sandblasting on engine, transmission or final drive. Wiring Diagram of tractors having generator and starter should be included in Documentation. Generators should not be replaced with alternators. Descriptions or pictures of checks (tests) made on electrical system, starter, generator, distributor or magneto, spark plugs and cutout relay should be provided in documentation. CF points may be awarded if work on tractor with cab and AC. Documentation should include pictures of inside transmission or disassembled with student analyzing components. See comments on final drive below. CF points could be given for work on sophisticated transmissions REFERENCE 1- Driving, Mechanical & Knowledge - R18.doc Page 1 of 2

8 Clutch /4 pts Will be evaluated when driving tractor and by engaging clutch with tractor in a low gear and brakes applied. Clutch free travel checked. Clutch disk, Throw out and Pilot bearings should have been replaced for 4 pts. Final Drive /4 pts For 3 to 4 pts must have been inspected and new gaskets and/or seals installed. Lubricant level checked. No signs of leaks. DRIVING, MECHANICAL & KNOWLEDGE REFERENCE 1 R18 For tractors with automatic transmissions (power-train without a clutch) these 4 points added to the Transmission points (4 + 4 = 8 points) There should be pictures of clutch work with exhibitor in picture to validate work done. Pictures of inside differential and final drive should be included with labels of what is being evaluated. Gear teeth condition, gear backlash, end play should be inspected and measured. Bearings should be evaluated. PTO / lift / hydraulics- /4 pts All must function properly. Fluids checked for proper level and cleanness. No signs of leaks. Should have inspected PTO and tested in driving. All fluid levels are checked by judging team 3 Steering /3 Pts Steering should have been observed in the driving. For example tracking of front wheels and slack in steering wheel should be observed. Brakes /3 pts Will be evaluated when driving and when evaluating clutch. Brakes on both wheels checked. Determine if they should be locked together when driving. Is equal pressure required on both R and L Brakes? Safety Will be evaluated under Safety Equipment found on Tractor Evaluation Sheet 3. Provide your safety evaluations to Team 3. Driving safety is also evaluated during both the unloading and driving process Tractors without hydraulics/pto will have these 4 points added to the Engine points (8 + 4 = 12 points) Work or tests made on hydraulics including pumps should be identified in documentation. If tractor was tested on a PTO dynamometer, identify procedure and results. See Engines. See Critique Sheet 1 for elements of Steering. Documentation pictures should have shown how steering gears sector and worm gear - are adjusted in the gear box. Brake work and adjustments should be explained with pictures included. NOTE: Safety Points are recorded by Team 3 Safety Equipment and Safe Practices used in unloading tractor is evaluated on Check Sheet 3. Safety points are awarded/deducted for unloading even if someone other than exhibitor offloaded the tractor. Knowledge / 10 Pts Points Comments Ask general and technical questions of exhibitor/s. General Questions Specific/Technical Questions use prepared questions also. Examples of General Questions: What were total costs of restoration, what mechanical work did you have done by someone else, approximately how many hours did you use in the restoration, and where did you get the tractor? Note: Exhibitor is responsible for knowledge of all work conducted on tractor even that which was done by others, shown as repair costs (RC). Team 2 will also evaluate knowledge and share with Team1. Examples of technical questions: What is interference angle on engine valve seat, what is pilot bearing and where is it found in power train, how is cylinder taper measured, how is fit of valve stem to guide measured, what measuring tool is used to measure gear run out and back lash and how is taper and out of round measured on a crank journal bearing? REFERENCE 1- Driving, Mechanical & Knowledge - R18.doc Page 2 of 2

9 DOCUMENTATION, KNOWLEDGE & PRESENTATION REFERENCE 2- R18 Entry ID Class # TRACTOR Year Documentation /15 Knowledge /10 Presentation /5 JUDGING CRITERIA Points COMMENTS Documentation /15pts See Premium List & Tractor Restoration Documentation Research Template. Documentation is a research portfolio and should not be construed as a scrap book. It should include but not limited to the following: All documentation should be arranged in a three-ring binder, using sequenced, labeled dividers with a corresponding table of contents. A one page description of the overall restoration process including tractor history and serial number. An expense report identifying all costs of restoration plus total dollars spent. Opportunity Costs (OC) identified. Repair Costs (RC) This includes costs of labor performed by others. Mechanics Report - A complete restoration description of the engine, power train, auxiliary systems, & external components. Photos including before, during, and after restoration. Photos should show safe working procedures and environments. Sequence photos as shown in Table of Contents MAX NUMBER OF PICTURES = 1200 Pictures may be printed on Photographic paper. Pictures do not need to be in plastic sleeves. See Premium List. PICTURES SHOULD BE OF HIGH QUALITY Pictures should be of technical activities examples - measuring crank journals, piston ring end gap, valve guide diameter etc. Pictures should be labeled with exhibitor name/s and mechanical activities they are performing. To prevent documentation from being so large, put 2 to 4 pictures per page. Recommended Sections for Table of Contents I. Serial Number and Tractor History II. Restoration Process Summary III. Reports a. Expense Report Detailed. Include receipts. Includes Opportunity Costs (OC) b. Repair Costs (RC) should be included in Expense Report. RC are those labor costs performed by others mechanics in town not completed by exhibitor IV. Ancillary & External Components - includes Steering, operator comfort, controls, fuel, air filter, turbo, electrical, cooling, hydraulics, brakes, etc. V. Engine VI. Transmission can include clutch VII. Final Drive Transmission & Final Drive could be combined in a Power Train Section VIII. Sheet Metal and Finishing - Restoration of Sheet Metal & Painting Process IX. Rims & Tires X. Eye Appeal Items Decals, Trim and Other (Section Titled Appearance could combine IX, X, XI) XI. Final or Completed Tractor (This Section could be deleted and Picture of Completed tractor placed in Summary.) XII. General Specifications Example: Tractor Fluid Capacity Chart, Tractor horsepower, Fastener torques and general tractor operator items including safety items. XIII. Research - SDS and/or PI and Tractor Check Sheets. REFERENCE 2 -Documentation, Knowledge & Presentation - R18.doc Page 1 of 2

10 DOCUMENTATION, KNOWLEDGE & PRESENTATION REFERENCE 2- R18 JUDGING CRITERIA Points COMMENTS Knowledge /10 pts Ask general and technical questions of exhibitor/s. General Questions Specific/Technical Questions Some of these should be prepared by judging prior. Points assigned here should be based on Comments regarding Knowledge made on Critique Sheet 2 in the comments column adjacent to the respective Topic under Documentation. Team 1 is also judging knowledge when they evaluate mechanical. Share your knowledge points/evaluations with them and come up with a consensus score. After reaching consensus with other judging team, record points allocated to Knowledge here and on Judges Score Sheet for this tractor. Questions will include general and technical questions. Examples of technical Questions: a) What is interference angle on engine valve seat? b) what is pilot bearing and where is it found in power train? c) how is cylinder taper measured?, d) how is fit of valve stem to guide measured? e) what measuring tool is used to measure gear run out and back lash? And f) how is taper and out of round measured on a crank journal bearing? Note: Exhibitor is responsible for knowledge of all work conducted on tractor even if it was done by others. Examples of General Questions: a) What were total costs of restoration? b) what mechanical work did you have done by someone else? c) approximately how many hours did you use in the restoration? and d) where did you get your tractor? Presentation/Showmanship /5pts Showmanship includes meeting judge and public eye contact introduction. Good handshake. Enthusiasm for describing tractor Articulate, assuring & confident. Display Area well arranged - clean & neat, including tractor. Exhibitor card and other signs Tools and items necessary for judges to check tractor fluid levels, tire pressures & wiping rags Exhibitors Attire Knowledge of project/tractor Documentation is also considered in Presentation This Information should also to be shared with the Showmanship (committee) Judges. Those Exhibitors, both Individual and Team, that excel in Showmanship should be identified on the Class Placing Summary Sheet that is turned into the Ag Mech. Office. Class Placing is determined from points kept on the Judges Score Sheet for each tractor. REFERENCE 2 -Documentation, Knowledge & Presentation - R18.doc Page 2 of 2

11 WORKSHEET 1 - SAFETY AND UNLOADING TRACTOR INSPECTORS Entry ID Class # TRACTOR Year (10 PTS) SAFETY POINTS - INCLUDING UNLOADING WILL BE TRANSFERRED TO CRITIQUE SHEET 3 Eval: E=Excellent, G=Good, F=Fair, P=Poor EVAL COMMENTS Starting Tractor Safely Safety Operation Familiarity With Controls Identify who us driving exhibitor or other Unloading (5 of 10 safety points ) Truck drivers, exhibitors or representatives must contact Unloading/Loading Officials If there are other projects on the trailer, the driver may be instructed to unload non-tractor projects first Get instructions from the unloading official for parking and unloading Person driving tractor to unload and load must be experienced and approved by leader AST or CEA Wait for safety checks and approval before unloading the tractor All ramps used in loading/unloading tractors MUST BE ATTACHED TO THE TRAILER (3 ramps required for tricycle tractors) Only Authorized Personnel will be permitted in the unloading area (JAM Personnel, Teachers, Authorized Operators) No Obstructions during the unloading of tractors (tool boxes, show supplies, unauthorized personnel) Cooperation from drivers, authorized representatives, instructors, and/or parents is expected. TRACTOR MUST BE DETERMINED SAFE BY JAM OFFICIAL PRIOR TO UNLOADING see below Safety and Driving Speed, Smooth Use of Clutch and Brakes- Includes proper shut down. Tire Inflation & Treatment (no tire black on tread) Record Tire Pressures in comments All below will also be evaluated in Mechanical by Team 1 Safe Operating Clutch (Check for clutch free travel) Safe Operating Brakes (Determine if R & L brake pedals should be locked together.) Normal Engine = Sound, Fumes, Leaks Normal Governor Action (Should idle when required) Circle Exhibitor or Other Be specific in your comments here so Judges can evaluate points to allocate toward Safety LF RF LR RR Share evaluations with Team 1 Equal pressure on left and right brake same results = N or Y (cir) Accelerates as normal? Y or N WORKSHEET 1 - Safety and Unloading - R18.doc

12 WORKSHEET 2 - FLUID LEVELS & SAFETY EQUIPMENT TRACTOR INSPECTORS Entry ID Class TRACTOR Year Note: Exhibitor should provide tools and help Inspector check the following. They should know where and how to check all fluid levels. Identify in Comments if NO - degree of level, low or too full. Some tractors will not have reservoirs for all identified below. Check for indications of sand from sandblasting in all reservoirs, including caps and engine cavities. Tire inflation pressures are recorded on WORKSHEET 1 Tractor Inspectors should provide Page 1 (this sheet) to Judging Team 1 who will consider it in their Mechanical Evaluations Tractor Inspectors will provide Page 2 (next page) to Judging Team 3 for Safety. Identify below not applicable NA, to those reservoirs that have been combined for example Transmission and Differential. Item / Level or Full 1 Radiator Coolant Should have antifreeze 2 Engine Oil Level Should not be too full 3 Air Cleaner Check Cleaner including intake pipe carefully for indications of sand left over from Sand Blasting 4 Transmission Lube 5 Differential Lube 6 Hydraulic Lube 7 Final Drive Lube 8 Planetary Lube 9 PTO Lube 10 Steering Box Lube 11 Tools to make checks- Wrenches-flashlight- wiping cloths 12 Exhibitor cooperative and knowledgeable 13 Fuel Level 10 gallons max or 2 inches on dip stick OK or Not Full Antifreeze Cir= Comments Yes or No Cir = Oil or Air If oil type feel to the bottom of cup for debris including sand. If Indications of Sand identify here: SAND = YES or NO Make comments if exhibitors provided these?- Did exhibitors know where and how to check fluids? Did they help? Was too much fuel in tank? WORKSHEET 2 - Fluid Levels & Safety Equipment - R18.doc Page 1 of 2

13 WORKSHEET 2 - FLUID LEVELS & SAFETY EQUIPMENT TRACTOR INSPECTORS Entry ID Class TRACTOR Year Provide this Page 2 to Safety Judges, Team 3 SAFETY EQUIPMENT (These evaluations will be included in the Safety Points found on Tractor Judges Critique Sheet 3) Safety points have been increased to 10: 5 pts for Driving and Unloading 5 pts for Safety Equipment COSTS Looking at BOM in Documentation determine and record the following costs. This information will be provided to Superintendents only and will be used to determine the need for new tractor classes and/or methods for classification. It will not be recorded on critiques passed back to Exhibitors If RC and/or OC and not clearly recorded make note of that here. EVAL COMMENTS Be specific in any comments so Judging Team 3 can evaluate Safety points Total Costs Repair Cost - RC Opportunity Costs - OC Drip Pans with Absorbent (Only at Night) You may inform exhibitors of this. Functional Fuel Shut Off Were they shut off when in barn? Safety Shields and Decals Are decals in proper location and like originals with proper fonts? ABC Fire Extinguisher (Should be completely charged) If not make comment as to what % Condition of their station (Display area) Was it neat and no debris, oily rags or paint cans? Were their electrical cords spread out where they should not be? Any unsafe situations? WORKSHEET 2 - Fluid Levels & Safety Equipment - R18.doc Page 2 of 2

DEPARTMENT OF THE ARMY TECHNICAL MANUAL TECHNICAL MANUAL OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL TRUCK, LIFT, FORK, POWER SHIFT G.E.D.

DEPARTMENT OF THE ARMY TECHNICAL MANUAL TECHNICAL MANUAL OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL TRUCK, LIFT, FORK, POWER SHIFT G.E.D. TM 10-3930-624-12 DEPARTMENT OF THE ARMY TECHNICAL MANUAL TECHNICAL MANUAL OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL TRUCK, LIFT, FORK, POWER SHIFT G.E.D., 6,000 LB CAPACITY, SRT. 180 IN. LIFT (ALLIS

More information

Level I. Student Outcomes

Level I. Student Outcomes SCHOOL Inspection Date Level I Student Outcomes A-6 4/15/16 Automotive Technician Training Standards Level I Automotive Technology Fundamentals All Student Outcomes must be documented. The term LECTURE

More information

TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL CRANE, WHEEL MOUNTED: 20 TON AT 10 FOOT RADIUS;

TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL CRANE, WHEEL MOUNTED: 20 TON AT 10 FOOT RADIUS; DEPARTMENT OF THE ARMY TECHNICAL MANUAL TM 5-3810-232-34 TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL CRANE, WHEEL MOUNTED: 20 TON AT 10 FOOT RADIUS; 2 ENGINES, DIESEL ENGINE

More information

A SYSTEMATIC SEQUENCE FOR PM INSPECTIONS

A SYSTEMATIC SEQUENCE FOR PM INSPECTIONS A SYSTEMATIC SEQUENCE FOR PM INSPECTIONS TYPE OF INSPECTION UNDER THE HOOD GASOLINE AND DIESEL 1 Fuel, oil, exhaust leaks - inspect 2 Oil and fuel lines inspect for kinks and wear 3 Automatic transmission

More information

Replacement parts to fit FORD ALPHABETICAL INDEX

Replacement parts to fit FORD ALPHABETICAL INDEX ALPHABETICAL INDEX A Adaptor, Hydraulic, 247, 249 to 250 Adaptor, PTO Shaft, 210 Air Cleaner, 157 to 158 Bowl, 157 Door, 273 Gasket, 159 Hose, 159 Spring, 158 Tube, 158 Air Conditioning Compressors, 282

More information

Not for Reproduction ADVANCE PRODUCT SERVICE INFORMATION APSI NO: 101 DATE: AUGUST SERIES UTILITY ENGINE 130G00 OHV HORIZONTAL SHAFT

Not for Reproduction ADVANCE PRODUCT SERVICE INFORMATION APSI NO: 101 DATE: AUGUST SERIES UTILITY ENGINE 130G00 OHV HORIZONTAL SHAFT ADVANCE PRODUCT SERVICE INFORMATION APSI NO: 101 DATE: AUGUST 2014 SUBJECT: MODELS: 950 SERIES UTILITY ENGINE 130G00 OHV HORIZONTAL SHAFT This APSI provides basic servicing information in advance of the

More information

TRUCKINGTRUTH.COM T T. Daniel B s Pre-Trip Inspection Checklist

TRUCKINGTRUTH.COM T T. Daniel B s Pre-Trip Inspection Checklist TRUCKINGTRUTH.COM T T Daniel B s Pre-Trip Inspection Checklist 1 My pre-trip begins as I approach the vehicle. I am looking for leaks, leaning one way or the other (which may indicate a low tire or bad

More information

Tractor Operators Contest Guidelines

Tractor Operators Contest Guidelines I. Description: Virginia 4H Tractor Operators Contest Guidelines This event provides 4H members an opportunity to demonstrate their knowledge of tractor maintenance, safety, and skill in operation. The

More information

Service Manual. D, DD Motor Grader

Service Manual. D, DD Motor Grader Allis Chalmers Service Manual D, DD Motor Grader Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND IT S SUCCESSORS

More information

Two Stroke Engines Snowmobile Engines Disassembly

Two Stroke Engines Snowmobile Engines Disassembly Name: Two Stroke Engines Snowmobile Engines Disassembly Objectives: The Student Will Be Able To: 1. Appreciate teaching methods and safety practices used in the small engine disassembly/assembly; 2. Properly

More information

14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor

14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly

More information

John Deere. MODEL: 420 Series Volume 1 of 2

John Deere. MODEL: 420 Series Volume 1 of 2 John Deere MODEL: 420 Series Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR

More information

John Deere. MODEL: 2020 Tractor. SIn 117,500 & Up JD-S-TM1044

John Deere. MODEL: 2020 Tractor. SIn 117,500 & Up JD-S-TM1044 John Deere MODEL: 2020 Tractor SIn 117,500 & Up THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE

More information

As a safety precaution, remove keys from the ignition while working under or around the vehicle.

As a safety precaution, remove keys from the ignition while working under or around the vehicle. CAB AND CHASSIS As a safety precaution, remove keys from the ignition while working under or around the vehicle. 1. Approach Check the overall appearance of vehicle stance (not leaning). Check for signs

More information

uaz work price-list Mortar Investments a.s. UAZ-469 repair price-list Page 1

uaz work price-list Mortar Investments a.s. UAZ-469 repair price-list Page 1 Mortar Investments a.s. UAZ-469 repair price-list Item pcs work/unit tot.work per hour work price parts all spares total vehicle as it is 1 0 0 0 0 A. Drive train. 1. engine engine take out if body taken

More information

TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL CRANE, TRUCK MOUNTED, 3/4 CU. YDS., 20 TON,

TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL CRANE, TRUCK MOUNTED, 3/4 CU. YDS., 20 TON, DEPARTMENT OF THE ARMY TECHNICAL MANUAL TM 5-3810-294-34 TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL CRANE, TRUCK MOUNTED, 3/4 CU. YDS., 20 TON, W/CLAMSHELL, DRAGLINE AND BACKHOE

More information

S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly

S/N 1H019H - 1H310H Page 1 of 33 46 Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/

More information

SAFE TRACTOR DRIVING CONTEST

SAFE TRACTOR DRIVING CONTEST SAFE TRACTOR DRIVING CONTEST RULES AND REGULATIONS INDIVIDUAL COMPETITION ALABAMA FFA ASSOCIATION TABLE OF CONTENTS Purpose... 1 Eligibility and Regulations... 1 Awards... 1 Sponsor... 1 General Rules...

More information

Hands On Test Scoring Instructions

Hands On Test Scoring Instructions Hands On Test Scoring Instructions Each scoring box contains 3 to 6 line items and up to 7 numbers plus a 0. Each section has a separate criteria for scoring. Based on the criteria, you will score the

More information

Small Engine Challenge

Small Engine Challenge N A T I O N A L YOUTH E N GI N E E R IN G C HA L L E N G E Small Engine Challenge September 24-26, 2017 Tippecanoe County Fairgrounds, Lafayette, IN This contest is designed to give youth participating

More information

mi Model 108 Compact Tractor Parts Catalog

mi Model 108 Compact Tractor Parts Catalog mi Model 108 Compact Tractor Parts Catalog Catalog No. 1226 PRICE 75 CENTS CASE MODEL 108 COMPACT TRACTOR Parts Catalog No. 1226 Leitch 2500 9-72 "'^^^l" 1" ifif --C: ^1=5 t^dj d- CASE MODEL 108 COMPACT

More information

Remove Air Cleaner Cover and. Filter

Remove Air Cleaner Cover and. Filter Remove Air Cleaner Cover and Inspect paper filter for tears Foam pre-cleaner is washable if equipped Replace if necessary Filter Remove Trim Panel Pull throttle lever knob off Remove 3, 8mm screws Remove

More information

900, 910, 1100 & 1110

900, 910, 1100 & 1110 Long Service Manual 900, 910, 1100 & 1110 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF LONG OR IT S SUCCESSORS. LONG AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR

More information

Craftsman Snow Thrower Model PARTS LIST

Craftsman Snow Thrower Model PARTS LIST Craftsman Snow Thrower Model 24.88955 11 13 3 26 24 9 1 18 54 6 25 15 20 23 16 5 14 1 55 9 4 4 28 8 30 2 5 56 35 36 46 3 39 50 53 43 38 48 52 42 51 41 40 49 4 44 31 45 31 21 29 34 9 19 10 32 22 26 Craftsman

More information

John Deere. MODEL: 2030 Tractor JD-S-TM10S1

John Deere. MODEL: 2030 Tractor JD-S-TM10S1 John Deere MODEL: 2030 Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY

More information

MODEL: 310A and 3108 Tractor, Loader and Backhoe Volume 1 of 2

MODEL: 310A and 3108 Tractor, Loader and Backhoe Volume 1 of 2 John Deere MODEL: 310A and 3108 Tractor, Loader and Backhoe Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS

More information

Valve + Valve Guide Unit: mm (in) Item Standard Limit Valve diam. IN (1.20) EX (1.06) Valve clearance (when cold)

Valve + Valve Guide Unit: mm (in) Item Standard Limit Valve diam. IN (1.20) EX (1.06) Valve clearance (when cold) Model: LT-A400FL9 P-17, 24, 28,03 Date: Feb. 12, 2018 SERVICE DATA Valve + Valve Guide Valve diam. IN. 30.6 (1.20) EX. 27.0 (1.06) Valve clearance (when cold) IN. 0.05 0.10 (0.002 0.004) EX. 0.22 0.27

More information

MODEL: 300,312,314 & 316 Hydrostatic Tractors

MODEL: 300,312,314 & 316 Hydrostatic Tractors John Deere MODEL: 300,312,314 & 316 Hydrostatic Tractors THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE

More information

Page 1 of HP B&S Vanguard Engine

Page 1 of HP B&S Vanguard Engine 1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly

More information

300 and 316 Hydrostatic Lawn and Garden

300 and 316 Hydrostatic Lawn and Garden John Deere MODEL: 300 and 316 Hydrostatic Lawn and Garden THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE

More information

S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly

S/N 1H019H - 1H310H Page 1 of 48 42 Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap

More information

71253, XL 440H Lawn Tractor, 2008 (SN ) : BLOWER HOUSING ASSEMBLY BRIGGS AND STRATTON MODEL 31P E1 [1/

71253, XL 440H Lawn Tractor, 2008 (SN ) : BLOWER HOUSING ASSEMBLY BRIGGS AND STRATTON MODEL 31P E1 [1/ 71253, XL 440H Lawn Tractor, 2008 (SN 280000001-280999999) : BLOWER HOUSING ASSEMBLY BRIGGS AND STRATTON MODEL 31P777-0133-E1 [1/ Page 1 of 50 71253, XL 440H Lawn Tractor, 2008 (SN 280000001-280999999)

More information

13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor

13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor 13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor 13A2693G190 LT-165 (2003) Page 2 of 31 Carburetor TC-640330 1 S Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640035 1 Throttle Shaft & Lever Assembly

More information

Kings Regional Occupational Program Course Information

Kings Regional Occupational Program Course Information Kings County Board of Education Approval March 2, 2011 California Department of Education Recertification December 2008 Kings Regional Occupational Program Course Information Course Title: Advanced Automotive

More information

OPEN TRACTOR PULLS -EVENING. Date: WEDNESDAY, AUGUST 22, Registration - Weigh-In Begins 4:30 p.m. Pulls Begin 5:30 p.m.

OPEN TRACTOR PULLS -EVENING. Date: WEDNESDAY, AUGUST 22, Registration - Weigh-In Begins 4:30 p.m. Pulls Begin 5:30 p.m. HUNTERDON COUNTY 4-H & AGRICULTURAL FAIR OPEN TRACTOR PULLS -EVENING Date: WEDNESDAY, AUGUST 22, 2018 Registration - Weigh-In Begins 4:30 p.m. Pulls Begin 5:30 p.m. Entry Fee -$20.00 per Tractor RPM S

More information

Contestants must be enrolled in the 4-H petroleum power or small engine program.

Contestants must be enrolled in the 4-H petroleum power or small engine program. VII. LAWN AND GARDEN TRACTOR OPERATOR S CONTEST A. GENERAL RULES There are three contest divisions--beginner, Junior and Senior. Beginner contestants must be 8-10 years old on January 1 of the contest

More information

9/30/2018 8:48 AM Approved (Changed Course) AUTO 151 Course Outline as of Fall 2018

9/30/2018 8:48 AM Approved (Changed Course) AUTO 151 Course Outline as of Fall 2018 9/30/2018 8:48 AM Approved (Changed Course) AUTO 151 Course Outline as of Fall 2018 CATALOG INFORMATION Dept and Nbr: AUTO 151 Full Title: Automotive Engines Last Reviewed: 11/27/2017 Title: AUTOMOTIVE

More information

ILLUSTRATED PARTS BOOK 43cc Cultivator S-CV-43 SCV43 SCV43.1

ILLUSTRATED PARTS BOOK 43cc Cultivator S-CV-43 SCV43 SCV43.1 ILLUSTRATED PARTS BOOK 43cc Cultivator S-CV-43 SCV43 SCV43.1 MAT Engine Technologies, LLC, REV. 20170406 Table of Contents Unit Assembly... 2 Engine Sub Assemblies: Air Filter & Carburetor Assembly...

More information

220, 222, 224, 444 & 644 Compact

220, 222, 224, 444 & 644 Compact J.I. Case Service Manual 220, 222, 224, 444 & 644 Compact Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF J.I. CASE OR IT S SUCCESSORS. J.I. CASE AND IT S SUCCESSORS

More information

QUARTERLY / ANNUAL MOBILE FIRE APPARATUS INSPECTION REPORT. Manufacturer. Serial no. Legend:

QUARTERLY / ANNUAL MOBILE FIRE APPARATUS INSPECTION REPORT. Manufacturer. Serial no. Legend: QUARTERLY / ANNUAL MOBILE FIRE APPARATUS INSPECTION REPORT Inspection date Fire department Apparatus no. Apparatus Manufacturer Model Serial no. Hourmeter _ Chassis Make _ Model VIN Odometer Legend: X

More information

TECHNICAL MANUAL DS AND GS MAINTENANCE MANUAL TRUCK, FORK LIFT, 4000 LB CAPACITY, 144 IN. LIFT, GASOLINE ENGINE DRIVEN (BAKER MODEL FJF-040)

TECHNICAL MANUAL DS AND GS MAINTENANCE MANUAL TRUCK, FORK LIFT, 4000 LB CAPACITY, 144 IN. LIFT, GASOLINE ENGINE DRIVEN (BAKER MODEL FJF-040) TECHNICAL MANUAL DS AND GS MAINTENANCE MANUAL TRUCK, FORK LIFT, 4000 LB CAPACITY, 144 IN. LIFT, GASOLINE ENGINE DRIVEN (BAKER MODEL FJF-040) (ARMY MODEL MHE211) FSN 3930-935-7963 HEADQUARTERS, DEPARTMENT

More information

EASTERN REGIONAL FFA SAFE TRACTOR/EQUIPMENT OPERATING CAREER DEVELOPMENT EVENT

EASTERN REGIONAL FFA SAFE TRACTOR/EQUIPMENT OPERATING CAREER DEVELOPMENT EVENT EASTERN REGIONAL FFA SAFE TRACTOR/EQUIPMENT OPERATING CAREER DEVELOPMENT EVENT EVENT RULES AND REGULATIONS: 1. Each Contestant must wear their FFA Jacket. 2. Only the FFA State Tractor/Equipment Operating

More information

MODEL: 400 Hydrostatic Tractor

MODEL: 400 Hydrostatic Tractor John Deere MODEL: 400 Hydrostatic Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE

More information

SERVICE DATA Date: August 1, 2007

SERVICE DATA Date: August 1, 2007 SERVICE DATA Date: August 1, 2007 Model: LT-A450XK8 VALVE + VALVE GUIDE Valve diam. 30.6 IN. (1.20) EX. 27.0 (1.06) Tappet clearance (when cold) 0.05 0.10 IN. (0.002 0.004) EX. 0.17 0.22 (0.007 0.009)

More information

301 0 Row Crop. and Standard

301 0 Row Crop. and Standard John Deere MODEL: 301 0 Row Crop and Standard THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR

More information

USPS: Preventative Maintenance (PMI) Directive Last Revision: December 1, 2016

USPS: Preventative Maintenance (PMI) Directive Last Revision: December 1, 2016 USPS: Preventative Maintenance (PMI) Directive Last Revision: December 1, 2016 The U.S. Postal Service has 200,000 vehicles for Vehicle Body Repair & Painting in of the Postal Fleet. The U.S. Postal Service

More information

Service Manual MF180. Service Manual MH-S-MF180

Service Manual MF180. Service Manual MH-S-MF180 Massey Harris Massey Ferguson Service Manual MF180 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF MASSEY HARRIS MASSEY FERGUSON OR IT S SUCCESSORS. MASSEY HARRIS

More information

John Deere. MODEL: 2030 Tractor JD-O-OMR50675

John Deere. MODEL: 2030 Tractor JD-O-OMR50675 John Deere MODEL: 2030 Tractor THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY

More information

ELECTRONIC FUEL INJECTION AIR COOLED HORIZONTAL SHAFT

ELECTRONIC FUEL INJECTION AIR COOLED HORIZONTAL SHAFT Illustrated Parts List Model Series 54E100 ELECTRONIC FUEL INJECTION FORM MS10639 - REV A - 02/21/2017 REPLACES FORM MS10639 - REV - - 05/06/2016 FILE IN SECT. 2 OF SERVICE MANUAL 54E100 AIR COOLED HORIZONTAL

More information

":. ---.!1~5-1!." Index

:. ---.!1~5-1!. Index ":. ---.!1~5-1!." Index IND~X 15-3 A Attachment Selector Valve 6-12,9-9 Accelerator/Decelerator Pedal 6-11,8-9 Attachments Weights 11-16 Accumulator Maintenance Precautions 4-19 B Accumulators Safety

More information

John Deere. MODEL: 4230 Tractor Volume 1 of 2 JD-S-TM1056

John Deere. MODEL: 4230 Tractor Volume 1 of 2 JD-S-TM1056 John Deere MODEL: 4230 Tractor Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR

More information

6 cylinder turbocharged diesel engines for industrial applications

6 cylinder turbocharged diesel engines for industrial applications Perkins 2800 Models 2806C-E16 WORKSHOP MANUAL 6 cylinder turbocharged diesel engines for industrial applications Publication TSD3450E, Issue 1 Proprietary information of Perkins Engines Company Limited,

More information

Course Information Course Number: AMT 1003 Course Name: Automotive Foundations

Course Information Course Number: AMT 1003 Course Name: Automotive Foundations Course Information Course Number: AMT 1003 Course Name: Automotive Foundations Credit-By-Assessment (CBA) Competency List Written Assessment Competency List Electrical Describe the effects of temperature,

More information

SERVICE DATA. Unit: mm (in) ITEM STANDARD LIMIT Valve diam. IN (1.42) EX ( ) EX.

SERVICE DATA. Unit: mm (in) ITEM STANDARD LIMIT Valve diam. IN (1.42) EX ( ) EX. 4 STROKE VALVE + VALVE GUIDE CAMSHAFT + CYLINDER HEAD SERVICE DATA Valve diam. 36.0 (1.42) 33.0 (1.30) Tappet clearance (when cold) 0.10 0.20 (0.004 0.008) 0.20 0.30 (0.008 0.012) Valve guide to valve

More information

Operator s Manual Field Boss

Operator s Manual Field Boss White Operator s Manual 2-105 Field Boss Operator s Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF WHITE OR IT S SUCCESSORS. WHITE AND IT S SUCCESSORS ARE NOT RESPONSIBLE

More information

Railway Crane Maintenance Manual

Railway Crane Maintenance Manual Diesel Engine System 2.4 2.4.1 Diesel Engine 2.4.1.1 Diesel Engine (Different Types) 2.4.1.2 Diesel Engine (Crane wise list) 2.4.2 Exhaust System 2.4.3 Fuel System 2.4.4 Diesel Engine Accelerator 2.4.5

More information

440 & 443 Skid Steer

440 & 443 Skid Steer Bobcat 440 & 443 Skid Steer THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF BOBCAT OR IT S SUCCESSORS. BOBCAT AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY

More information

Illustrated Parts List to

Illustrated Parts List to Illustrated Parts List Model Series TYPE NUMBERS 0111 through 0199, 0200 through 0213, 0300 through 0353, 1345,1353, 2035 through 2073, 2135 through 2174, 4001 through 4090, 5001, 5005, 5006, 5035 through

More information

TECHNICAL MANUAL UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS

TECHNICAL MANUAL UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS TECHNICAL MANUAL UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS TRUCK, FORK LIFT, GASOLINE ENGINE DRIVEN, SOLID RUBBER TIRES, 4,000 LB CAPACITY ARMY MODEL MHE-203

More information

Inspection Checklist

Inspection Checklist Inspection Checklist Items Conditions before any adjustments made by inspector Conditions after adjustments made to ready car for service Conditions after Jiffy Lube service performed Tire Pressures LF

More information

SCOPE OF THE CONTEST AUTOMOTIVE SERVICE TECHNOLOGY NYS

SCOPE OF THE CONTEST AUTOMOTIVE SERVICE TECHNOLOGY NYS AUTOMOTIVE SERVICE TECHNOLOGY NYS PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of automotive service

More information

VOLVO - INSPECTION REPORT Volvo, A40G - Articulated haul trucks

VOLVO - INSPECTION REPORT Volvo, A40G - Articulated haul trucks VOLVO - INSPECTION REPORT Volvo, A40G - Articulated haul trucks Country: US Dealer: Alta Equipment Company Location: 56195 PONTIAC TRAIL NEW HUDSON MI 48165 Date: 11/06/2018 Inspector: FRANK TROTTO Year:

More information

2-135, & Chassis & Engine Chassis Only Volume 1 of 2

2-135, & Chassis & Engine Chassis Only Volume 1 of 2 White Service Manual 2-135, 2-155 & 2-180 Chassis & Engine 4-210 Chassis Only Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF WHITE OR IT S SUCCESSORS.

More information

TECHNICAL MANUAL UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS

TECHNICAL MANUAL UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS TECHNICAL MANUAL UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS TRUCK, LIFT, FORK: GED, PNEUMATIC TIRED WHEELS, 6000 LB CAPACITY, 168 IN. LIFT ALLIS-CHALMERS

More information

CDL Series Pre-Trip Inspection AT-TC3TS T1-JA01. Pre-Trip Inspection Checklist

CDL Series Pre-Trip Inspection AT-TC3TS T1-JA01. Pre-Trip Inspection Checklist Pre-Trip Inspection Checklist This checklist covers different parts of the vehicle you would check before a trip. Note that some specifications described in the following content may not be the same as

More information

SPECIFICATIONS TEST AND ADJUSTMENT SPECIFICATIONS SPECIFICATIONS ENGINE FD620D, K SERIES

SPECIFICATIONS TEST AND ADJUSTMENT SPECIFICATIONS SPECIFICATIONS ENGINE FD620D, K SERIES ENGINE FD620D, K SERIES SPECIFICATIONS SPECIFICATIONS TEST AND ADJUSTMENT SPECIFICATIONS Engine Oil Pressure Sensor Activates............................... 98 kpa (14.2 psi) Oil Pressure While Cranking

More information

Illustrated Parts List 12H800

Illustrated Parts List 12H800 FORM MS 0990 09/22/2004 REPLACES FORM MS 0990 06/21/2004 FILE IN SECT. 2 OF SERVICE MANUAL 12H800 Illustrated Parts List Model Series 12H800 TYPE NUMBERS 0652 through 6699. TABLE OF CONTENTS Alternator..........................

More information

Reproduction. Not for. Illustrated Parts List 31E800. Model Series TYPE NUMBERS 1502, 1630, 4502.

Reproduction. Not for. Illustrated Parts List 31E800. Model Series TYPE NUMBERS 1502, 1630, 4502. FORM MS10271 REV J 01/29/2016 REPLACES FORM MS10271 REV H 05/08/2015 FILE IN SECT. 2 OF SERVICE MANUAL 31E800 Illustrated Parts List Model Series 31E800 TYPE NUMBERS 1502, 1630, 4502. PRINTED IN U.S.A.

More information

John Deere MODEL: SIn 0-12,999 JD-O-OMR53779

John Deere MODEL: SIn 0-12,999 JD-O-OMR53779 John Deere MODEL: 4230 SIn 0-12,999 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY

More information

MAINTENANCE EVALUATION CHECKLIST ELECTRIC ELEVATORS

MAINTENANCE EVALUATION CHECKLIST ELECTRIC ELEVATORS Manufacturer: Model: Evaluation Performed By: INTRODUCTION: This checklist will enable the user to make an objective appraisal of the condition of the equipment. Given the variety and complexity of the

More information

Illustrated Parts List to

Illustrated Parts List to Illustrated Parts List Model Series 138400 to 138499 FORM MS 2111 2Q 6/2000 REPLACES FORM MS 2111 7/99 FILE IN SECT. 2 OF SERVICE MANUAL 138400 to 138499 TYPE NUMBERS 0035, 0038, 0042, 0047, 0084, 0120,

More information

Knowledge of Diagnosis and Rectification of Light Vehicle Engine Faults

Knowledge of Diagnosis and Rectification of Light Vehicle Engine Faults Unit 157 Knowledge of Diagnosis and Rectification of Light Vehicle Engine Faults UAN: F/601/3733 Level: Level 3 Credit value: 6 GLH: 45 Relationship to NOS: This unit is linked to LV07 Diagnose and Rectify

More information

Terraplane Hudson Six Hudson Eight FRONT AXLE

Terraplane Hudson Six Hudson Eight FRONT AXLE 1936 Service Information and Adjustments Terraplane Terraplane Hudson Hudson 8 Hudson 8 Hudson 8 Hudson 8 Deluxe Custom Six Deluxe Custom Deluxe Custom ( 115 WB) (115 WB) (120 WB) (120 W B) (120 WB) (127

More information

All outside contractors have to be qualified by Fleet Services.

All outside contractors have to be qualified by Fleet Services. Vehicle Practice Practice: Reference: 1 of 7 1.0 INTRODUCTION The Preventive Maintenance Inspection Program is designed to ensure routine service functions are performed at regular intervals on Company

More information

Retriever 5800G/P/D. revised 2/01 Form Number

Retriever 5800G/P/D. revised 2/01 Form Number Retriever 5800G/P/D PARTS LIST Advance MODELS 56482005, 56482010, 56482015 This parts list is for machines after serial number 221134 All models covered in this manual are OBSOLETE revised 2/01 Form Number

More information

2006 Komatsu WA320 Serial #: A32618

2006 Komatsu WA320 Serial #: A32618 Page 1 of 16 2006 Komatsu WA320 Serial #: A32618 Additional counterweight Quick Coupler SMU/Hours: 1850 Start Run: Yes Overall: Insp Date: 11/9/2007 Page 2 of 16 GENERAL: Radiator Grille: Radiator Shroud:

More information

Dress and Appearance

Dress and Appearance Shop Safety Information Andover High School Explain how to work safely around these items. List Rules for using each item? Dress and Appearance Loose clothing shirts tucked Sleeves buttoned or rolled Me

More information

TIGHTENING TORQUE CHART For other nuts and bolts not listed in the preceding page, refer to this chart:

TIGHTENING TORQUE CHART For other nuts and bolts not listed in the preceding page, refer to this chart: TIGHTENING TORQUE ENGINE ITEM N m kgfm lbft Cylinder head cover bolt 14 1.4 10.0 Spark plug 11 1.1 8.0 Cylinder head bolt (M10) 47 4.7 18.0 (M6) 10 1.0 7.0 Cylinder bolt 10 1.0 7.0 Camshaft journal holder

More information

365-SUB Engine : Engine Assembly 365-SUB [1/1] Page 1 of 5

365-SUB Engine : Engine Assembly 365-SUB [1/1] Page 1 of 5 Page 1 of 5 1 951-11012 Bolt 2 951-11054 Valve Cover 2 951-11054 1 Valve Cover 3 731-07059 Breather Hose 4 726-04101 Hose Clamp 6 N/A 1 Intake Valve Spring Seat 7 751-11124 Pivot Locking Nut 7 751-11124

More information

MODEL: 520 Gas and All Fuel

MODEL: 520 Gas and All Fuel John Deere MODEL: 520 Gas and All Fuel THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE

More information

Illustrated Parts List

Illustrated Parts List FORM MS 3745 12/21/2006 FILE IN SECT. 2 OF SERVICE MANUAL 613700 Illustrated Parts List Model Series 613700 TYPE NUMBERS 0110. TABLE OF CONTENTS Air Cleaner......................... 6 Alternator..........................

More information

CHASSIS CONTENTS EXTERIOR PARTS 6-1 FRAME COVER 6-2 REAR FRAME COVER 6-4 FRONT WHEEL 6-6 FRONT BRAKE 6-10 HANDLEBARS 6-17 FRONT FORK 6-19

CHASSIS CONTENTS EXTERIOR PARTS 6-1 FRAME COVER 6-2 REAR FRAME COVER 6-4 FRONT WHEEL 6-6 FRONT BRAKE 6-10 HANDLEBARS 6-17 FRONT FORK 6-19 CHASSIS CONTENTS EXTERIOR PARTS 6- FRAME COVER 6- REAR FRAME COVER 6-4 FRONT WHEEL 6-6 FRONT BRAKE 6-0 HANDLEBARS 6-7 FRONT FORK 6-9 STEERING 6-6 REAR WHEEL 6-3 REAR BRAKE 6-39 6 REAR SHOCK ABSORBER 6-43

More information

1.6L 4-CYL - VIN [E]

1.6L 4-CYL - VIN [E] 1.6L 4-CYL - VIN [E] 1993 Nissan Sentra 1993 NISSAN ENGINES 1.6L 4-Cylinder NX, Sentra * PLEASE READ THIS FIRST * NOTE: For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES

More information

Illustrated Parts List. Model Series 12D100. TYPE NUMBERS 0001 through TABLE OF CONTENTS

Illustrated Parts List. Model Series 12D100. TYPE NUMBERS 0001 through TABLE OF CONTENTS Illustrated Parts List Model Series 12D100 TYPE NUMBERS 0001 through 0940. TABLE OF CONTENTS FORM MS3399 REV P 08/06/2014 REPLACES FORM MS3399 REV N 10/03/2012 FILE IN SECT. 2 OF SERVICE MANUAL 12D100

More information

SERVICE DATA. Item Standard Limit Valve diam. IN (1.42) EX (1.30) Tappet clearance (When cold)

SERVICE DATA. Item Standard Limit Valve diam. IN (1.42) EX (1.30) Tappet clearance (When cold) Model: LT-A750XK9 P-17, 24, 28, 33 LT-A750XZK9 P-17, 28, 33 4 STROKE Camshaft + Cylinder Head SERVICE DATA Valve + Guide Valve diam. IN. 36.0 (1.42) EX. 33.0 (1.30) Tappet clearance (When cold) IN. 0.10

More information

COLT 2310, 2510, AND 2712 COM PACT TRACTORS CHAPTER 9 TROUBLESHOOTING AND ANALYSIS

COLT 2310, 2510, AND 2712 COM PACT TRACTORS CHAPTER 9 TROUBLESHOOTING AND ANALYSIS COLT 2310, 2510, AND 2712 COM PACT TRACTORS CHAPTER 9 TROUBLESHOOTING AND ANALYSIS 9-A-1 UPON RECEIVING ANENGINE FORRE- PAIR. Learn the history of the unit from the customer. While the customer is present

More information

World Formula TECH MANUAL

World Formula TECH MANUAL World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be

More information

Illustrated Parts List

Illustrated Parts List 01/08/2010 FILE IN SECT. 2 OF SERVICE MANUAL PRO DRIVE 613777-0113 -E1 Illustrated Parts List Model Series AIR COOLED 613777 TYPE NUMBERS 0113. TABLE OF CONTENTS Air Cleaner... Alternator... Blower Housing/Shrouds...

More information

JEFFERSON COLLEGE COURSE SYLLABUS AUT151 AUTOMOTIVE ENGINE REPAIR. 1 Credit Hour. Prepared by: Gerard Uhls

JEFFERSON COLLEGE COURSE SYLLABUS AUT151 AUTOMOTIVE ENGINE REPAIR. 1 Credit Hour. Prepared by: Gerard Uhls JEFFERSON COLLEGE COURSE SYLLABUS AUT151 AUTOMOTIVE ENGINE REPAIR 1 Credit Hour Prepared by: Gerard Uhls Revised by: Gerard Uhls Date: October 24, 2013 Date: February 10, 2014 Date: September 16, 2016

More information

Illustrated Parts List. Model Series AIR COOLED

Illustrated Parts List. Model Series AIR COOLED FORM MS6154--06/10/2010 REPLACE FORM MS6154--03/06/2010 FILE IN SECT. 2 OF SERVICE MANUAL Illustrated Parts List Model Series AIR COOLED TYPE NUMBERS 0035, 0038, 0048, 0076, 0078, 0079, 0100, 0111, 0113,

More information

Claremont Speedway 2015 Wildcat rules

Claremont Speedway 2015 Wildcat rules Claremont Speedway 2015 Wildcat rules These rules are to be used as a guide The wildcat division is a division that is for the racer that wants to have fun with a limited amount of knowledge and at an

More information

SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ)

SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ) Page 1 of 19 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ) SSR200 Zongshen 200cc Dirt Bike (VIN PREVIX LZSJ) SSR200 Zongshen

More information

CNH Capital AssetsAsset Appraisal System

CNH Capital AssetsAsset Appraisal System Page 1 of 12 Customer Name UNIT # 8U0536 Location: Decatur TX Account Number Note Number Date Mode of Offer Available Asset Return ID for Sale Hazel R Loan 3787900126 61031001 N/A 697689 Greenwood Repossession

More information

MISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE

MISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE MISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE 1. Course Title: Basic Car Care 2. CBEDS Title: Automotive Mechanics 3. CBEDS Number: 5655 4. Job Titles/DOT

More information

X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY

X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,

More information

INSP Aerial Periodic Inspections

INSP Aerial Periodic Inspections The Aerial Periodic Inspection course features five individual segments covering the Terex Utilities Aerial Platform Periodic Inspections. The training outlines the Terex Utilities inspection form as well

More information

John Deere. MODEL: 8430 & 8630 Volume 1 of 2 JD-S-TM1143

John Deere. MODEL: 8430 & 8630 Volume 1 of 2 JD-S-TM1143 John Deere MODEL: 8430 & 8630 Volume 1 of 2 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR

More information

1950 Pacemaker. Specifications & Adjustments

1950 Pacemaker. Specifications & Adjustments Specifications & Adjustments Specifications & Adjustments ENGINE: Valve Arrangement Bore and Stroke Piston Displacement Maximum Torque Horsepower Actual Taxable Compression Ratio: Cast Iron Head (Std.)

More information

SECTION C Engine 5.4L (4V)

SECTION C Engine 5.4L (4V) 303-01C-i Engine 5.4L (4V) 303-01C-i SECTION 303-01C Engine 5.4L (4V) CONTENTS PAGE SPECIFICATIONS... 303-01C-2 303-01C-2 Engine 5.4L (4V) 303-01C-2 SPECIFICATIONS Material Motorcraft Metal Surface Prep

More information