Cable Cubby 1200 and 1400 Installation Guide

Size: px
Start display at page:

Download "Cable Cubby 1200 and 1400 Installation Guide"

Transcription

1 e NT: R.com for thtion O P IM tron talla w.ex uide, ins ations. o ww Go t te user g specific nd ple com ctions, a u instr 00 and 400 Installation Guide This guide provides instructions for an experienced installer to install and connect the Extron 00 and 400. The units are furniture-mounted enclosures for cable access, connections, and AC power. s that are not in use can be stored out of the way while remaining connected to the presentation system. Planning Check with local and state regulations before starting the installation: Ensure that the planned installation complies with building and electrical codes. Ensure that the planned installation complies with the Americans with Disabilities Act or other accessibility requirements. Check all parts and equipment before installation: Ensure that all parts are present in each kit. Ensure that necessary tools and equipment are available for the installation. Kit Contents A Hole 400Plugs #6 Mounting Zip Ties -40 #6 Mounting ounting d Star #6 Mounting 400 A T 5 A A T A T Grommet Pin & Clip 00 Grommet Pin & Clip 400 Pin & Clip #6 Mounting AC Power #6 Mounting andand StarStar Grommet Grommet 5 Power AC AC Power Frame AAPAAP Frame A T A Grommet #4-40 #4-40 A 5 Pin & Clip A T 6 (/8"), 5 A (/4") A Grommet & Clip Pin Pin & Clip (/8"), 4 (/4") 400 AC Power A 5 Pin & Clip Grommet #6 Mounting A 8 Pin & Clip 5 5 Frame #6AAP Mounting 4Plugs Hole Hole Plugs A 5 A Zip Zip TiesTies 5 Grommet Grommet #6 Mounting and Star Mounting Zip Ties and Star Grommet 00 8 Pin & Clip 6

2 00 and 400 Installation Guide (Continued) Preparing the Table Cut a hole in the surface where the enclosure will be installed. Read the following information before making a cut. Determine the best location for the enclosure Ensure that the location where the is to be installed is convenient for as many users as possible. Ensure that the edge on which the lid opens is oriented correctly. Ensure that there is ample space under the table for cables. When installing retractors in the, ensure that there is enough space for the retractor assembly under the table or furniture. See dimensions for the retractors below. 9." (.4 cm) Table Top 4.9" (7.8 cm) 0.6" (6.9 cm) 6.7" (67.8 cm) 7.8" (45. cm).5" (59.7 cm) 0.8" (5.8 cm) 9.4" (74.7 cm) X Models.7" (60. cm) 0 X Models Choose a method for cutting the hole in the table ATTENTION: The opening in the table for the should be cut only by licensed and bonded craftspeople. Exercise care to prevent scarring or damaging the furniture. ATTENTION: ouverture dans la table pour le devrait être coupée seulement par des artisans autorisés et qualifiés. Faites attention à ne pas faire de marques sur le meuble et à ne pas l endommager. CAUTION: Wear safety glasses when operating power equipment. Failure to comply can result in eye injury. ATTENTION: Portez des lunettes de sécurité lorsque vous utilisez l équipement électrique. Ne pas respecter cela peut conduire à une blessure à l oeil. Choose one of the following methods for cutting the hole: Hand Router and Routing Template Jigsaw and Paper Cut-Out Template CNC Wood Router If using a CNC wood router or other precise machinery, use the exact cut-out dimensions for your model (see the table below). Visit for routing template part numbers and instructions. Cut-Out Radius: 0.5" (0.6 cm) User Access Cut-Out Template for the Extron 00 Trim Ring ip Outer Edge of Front Bezel (Do not cut this line.) P/N Rev. A. Confirm the product to be installed.. Remove the surface cut-out area (gray) from the template.. Measure the cutout and template. 4. Mark the position on the furniture where the 00 will be installed. 5. Double check the dimensions and position, then cut the opening. Page Size: " x 7" Print Scale : Do not Shrink Dimensions and cut-out templates are available online at Product Cut-out Dimensions User Access Width CC " (54.0 mm) CC " (54.0 mm) Side Dimension 4.00" (0.6 mm) 6.75" (7.5 mm)

3 Preparing the Step Assemble s. modules allow you to populate the enclosure with a combination of AAPs, cable pass-through, or retractors. Follow the steps below to assemble the connectivity modules of your choice. Option : AAP AAPs in the AAP plate. Secure up to three single-space Secure up to three single-space AAPs in the AAP plate. Secure the AAP plate on the connectivity brackets, Secure using four the of AAP the plate provided on the module connectivity screws. brackets, using four of the provided module screws. #4-40 Nut with #4-40 Captive Nut Washer with Captive Washer Insert cables through the bottom of the connectivity bracket. Insert Connect cables cables through to the the AAPs. bottom of the connectivity bracket. Connect cables to the AAPs. NOTE: After assembling the module, proceed to Step Install the s on the next page. Option : Pass-Through Snap the included hole plugs into Snap any unused the included holes. hole plugs into any unused holes. Insert cables through the bottom of the connectivity bracket Insert and into cables the holes through of the grommet bottom of plate. the connectivity bracket and into the holes of the grommet plate. Secure the grommet plate on the Secure connectivity the grommet bracket, plate using on four the connectivity of the provided bracket, module using screws. four of the provided module screws. NOTE: After assembling the module, proceed to Step Install the s on the next page. Option : Insert the bracket into the. The bracket may be installed on the left or right side of the enclosure and at the lowest height. Secure the bracket using four of the provided mounting screws with star washers. NOTE: Use a screwdriver to secure the bracket with the screws. After installing the bracket, proceed to Step Install the s on the next page to install the power module. Install the s after the is mounted on the table (see Mounting s Under the Table on page 5).

4 Step Install the s. Determine where the connectivity modules and power module will be installed in the. The modules may be installed on the left or right side of the enclosure and at various heights. NOTE: Ensure that there is enough room above the modules for the lid to close completely. Use a screwdriver to secure the modules with the screws. Securethe themodules modulesusing usingfour fourofofthe theprovided providedmounting mountingscrews screwsand andstar starwashers. washers. Secure WARNING: Risk of Electric Shock. To ensure proper electrical grounding, use the provided #6- mounting screws with the star washers. AVERTISSEMENT: Risque de choc électrique. Afin d assurer une mise à la terre correcte, utilisez les fixations de mise à la terre #6- et les rondelles en étoile fournies. Insert the modules Insert into the the modules. into the. Mounting the in the Table Mount the flush with the table. CAUTION: The flanged edges of the top of the surface enclosure are sharp. These edges are also soft and may be easily nicked or bent. Exercise caution when handling the enclosure to prevent personal injury or damage to the enclosure. ATTENTION: es extrémités à brides du haut de la surface du boîtier sont aiguisées. Ces extrémités sont aussi lisses et peuvent facilement être coupées ou pliées. Soyez prudents lorsque vous manipulez le boîtier afin d éviter de l endommager ou de vous blesser. Remove the plastic strips and Remove film onthe theplastic surfacestrips of theand film on the surface of the.. 4 Ensure that the Ensure that theare side clamps side clamps are the seated against seated against enclosure. the enclosure. ower the into the hole to test the fit. the enlarge into thethe hole to test the fit. ower If necessary, carefully opening. If necessary, carefully enlarge the opening.

5 00 and 400 Installation Guide (Continued) Under the table, adjust the side clamps on the enclosure. Ensure the is firmly seated in the table. Raise the lever to secure the. ever NOTE: To lower the side Rotate the side clamp outward and ensure that the lever is down. Slide the clamp all the way up against the bottom of the table. Ensure the is firmly seated in the table. Raise the lever to secure the. clamp, turn the lever down, then press and hold the locking plate while sliding down the clamp. ever ocking plate Rotate the side clamp outward and ensure that the lever is down. Slide the clamp all the way up against the bottom of the table. Ensure the is firmly seated in the table. Raise the lever to secure the. Mounting s Under the Table pin. Horizontal or Angular Mounting For horizontal or angular mounting, remove these orientation screws (front and back), then follow the steps shown at left. Secure the clip on the pin. For installation details, see the Setup Guide available online at Insert the pin through the retractor mounting hole on the side of the and retractor assembly. Insert retractors into the retractor bracket. Secure the clip on the pin. Insert the pin through the retractor mounting hole on the side of the and retractor assembly. 4 Secure the locking screw on each retractor. Do not overtighten. 5

6 Routing and Connecting s Connect cables to the AV system and connect the AC power cord. CAUTION: Risk of Electric Shock. This equipment must be grounded. ATTENTION: Risque de choc électrique. Cet équipement doit être fixé au sol. NOTE: Ensure that there is no tension on the power cable. Using zip ties, secure cables to the holes on the bottom of the. For cable pass-through applications, allow at least 6 inches (0.9 m) of cable loop for each cable. Installation Checklist Planning (page ) Check with local and state regulations before starting the installation. Check all parts and equipment before installation. Preparing the Table (page ) Determine the best location for the enclosure. Choose a method for cutting the hole in the table. Preparing the (page ) Choose between AAPs, cable-pass through, and retractor connectivity to populate the. Secure the brackets and power module in the. Mounting the in the Table (page 4) Mount the flush with the table. Mounting s Under the Table (page 5) Routing and Connecting s (page 6) Rev. C 05 4 Extron Headquarters Inside USA/Canada Only Extron USA - West Extron USA - East FAX FAX Extron Europe Inside Europe Only FAX Extron Asia FAX Extron Japan FAX Extron China FAX Extron Middle East FAX Extron Korea FAX Extron India (Inside India Only) FAX 04 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.

Cable Cubby 1202 and 1402 Installation Guide

Cable Cubby 1202 and 1402 Installation Guide Cable Cubby 0 and 40 Installation Guide IMPORTANT: Go to www.extron.com for the complete user guide, installation instructions, and specifications. This guide provides instructions for an experienced technician

More information

Cable Cubby 500 and 700 Installation Guide

Cable Cubby 500 and 700 Installation Guide e NT: R.com for thtion O P IM tron talla w.ex uide, ins ations. o ww Go t te user g specific nd ple com ctions, a u instr 500 and 700 Installation Guide This guide provides instructions for an experienced

More information

Cable Cubby 650 UT Installation Guide

Cable Cubby 650 UT Installation Guide e NT: RTA.com for thtion O P IM tron talla w.ex uide, ins ations. o ww Go t te user g specific nd ple com ctions, a u instr Cable Cubby 650 UT Installation Guide This guide provides instructions for an

More information

AVEdge 100 Installation Guide

AVEdge 100 Installation Guide AVEdge 00 Installation Guide IMPORTANT: Go to www.extron.com for the product specifications. This guide provides instructions for an experienced installer to install and connect the Extron AVEdge 00 Cable

More information

Retractor SM Installation Guide

Retractor SM Installation Guide Installation Guide IMPORTANT: Go to www.extron.com for the complete user guide, installation instructions, and specifications. This guide provides basic instructions for an experienced technician to quickly

More information

INSTALLATION INSTRUCTIONS LED RETROFIT ASSEMBLY (LRA) Rev F

INSTALLATION INSTRUCTIONS LED RETROFIT ASSEMBLY (LRA) Rev F SAFETY S IMPORTANT SAFETY INFORMATION SUITABLE FOR DRY OR DAMP LOCATIONS. NOT FOR USE WITH PHASE CUT DIMMERS. Risk of shock. Disconnect power before installation. DANGER CONVIENT AUX EMPLACEMENTS HUMIDES.

More information

Captivate Illuminated Mirror Light

Captivate Illuminated Mirror Light ENGLISH WARNINGS & SAFETY INFORMATION: PLEASE READ CAREFULLY FRANÇAIS MISES EN GARDE ET SÉCURITÉ: SE IL VOUS PLAÎT LIRE ATTENTIVEMENT WARNING: RISK OF FIRE OR ELECTRIC SHOCK. LUMINAIRE WIRING AND ELECTRICAL

More information

PVM 220 Installation Guide

PVM 220 Installation Guide R CONFIG SELECT AUDIO AUX INPUT VOICELIFT PAGING SENSOR SENSITIVITY PVM 0 Installation Guide The Extron PVM 0 is an enclosure for the safe mounting of PoleVault system devices in the plenum area of a suspended

More information

PVM 220 Installation Guide

PVM 220 Installation Guide R CONFIG SELECT AUDIO 1 3 5 2 4 AUX INPUT VOICELIFT PAGING SENSOR SENSITIVITY PVM 220 Installation Guide The Extron PVM 220 is an enclosure for the safe mounting of PoleVault system devices in the plenum

More information

Specification Grade Contemporary Wall Mount/Technical Installation Data

Specification Grade Contemporary Wall Mount/Technical Installation Data AVAILABLE CONFIGURATIONS RECESSED MOUNT SURFACE MOUNT MOUNTING REQUIREMENTS A. Recessed Mount: Minimum 4-Gang Box, 1-5/8 in. Deep (72.8 Cubic Inches) with 4-Gang Box Cover (20.3 Cubic Inches) B. Surface

More information

INSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit

INSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit INSTALLATION INSTRUCTIONS LED Canopy Retrofit Kit TRMUNV065ECxyyZ TRAUNV065ECxyyZ Installation Instructions subject to change without notice. Page 1 of 8 1.0 INSTALLATION WARNINGS 1. 2. 3. 4. 5. 6. "THIS

More information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. DANGER RISK OF SHOCK DISCONNECT POWER BEFORE INSTALLATION

READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. DANGER RISK OF SHOCK DISCONNECT POWER BEFORE INSTALLATION UR Series LED Upgrade Kit Includes: 24" Linear Option IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL

More information

Lumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame

Lumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame Installation Guide Lumination TM LED Luminaire RC/LRC/RX/LRX Series - New Construction Frame BEFORE YOU BEGIN Read these instructions completely and carefully. RISK OF ELECTRIC SHOCK Turn power off before

More information

SF 10C SUB Subwoofer Setup Guide

SF 10C SUB Subwoofer Setup Guide SF 10C SUB Subwoofer Setup Guide This guide provides instructions for an experienced installer to install the Extron SF 10C SUB subwoofer and to make all connections. The subwoofer typically is installed

More information

ebus Button Panel Decora Series Setup Guide

ebus Button Panel Decora Series Setup Guide Product Category ebus Button Panel Decora Series Setup Guide IPORTANT: www.extron.com Go to www.extron.com for the complete user guide and installation instructions before connecting the product to the

More information

IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following:

IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following: ZR-RK Series LED Retrofit Troffer Kit Includes: ZR22RK and ZR24RK Standard and Emergency Luminaires IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed

More information

INSTALLATION INSTRUCTIONS SUPERPLANE 2.5. Suspended. A nd Avenue, Unit 1 Oakland, CA P E W alwusa.

INSTALLATION INSTRUCTIONS SUPERPLANE 2.5. Suspended. A nd Avenue, Unit 1 Oakland, CA P E W alwusa. INSTALLATION INSTRUCTIONS SUPERPLANE 2.5 Suspended A 1035 22nd Avenue, Unit 1 Oakland, CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com SP2.5S - Safety & Warnings! 1. Read all instructions. 2.

More information

Instruction Sheet ERK-XXXXKD SERIES KNOCKDOWN STANDALONE RACK

Instruction Sheet ERK-XXXXKD SERIES KNOCKDOWN STANDALONE RACK Instruction Sheet ERK-XXXXKD SERIES KNOCKDOWN STANDALONE RACK C UL R US LISTED THANK YOU Thank you for purchasing the ERK-XXXXKD Series Knockdown Standalone Rack. Please read these instructions thoroughly

More information

ebus Button Panel EU and MK Series Setup Guide

ebus Button Panel EU and MK Series Setup Guide Product Category ebus Button Panel EU and K Series Setup Guide IPORTNT: www.extron.com Go to www.extron.com for the complete user guide and installation instructions before connecting the product to the

More information

MOONRING 1.5 MOONRING 3

MOONRING 1.5 MOONRING 3 INSTALLATION INSTRUCTIONS MOONRING 1.5 MOONRING 3 MR1.5 & MR3 Suspended, Ceiling LED n A 1035 22nd Avenue, Unit 1 Oakland, CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com Safety & Warnings!

More information

Installation Instructions

Installation Instructions at :: rangehoods. com Call 1-800-667-8721 anywhere in the US and Canada - www.rangehoods.com Installation Instructions ZV950 36" Stainless Steel Vent Hood Monogram. We bring good things to life. GE Monogram

More information

M9109-GGx-5 Series Proportional Electric Non-spring Return Actuators

M9109-GGx-5 Series Proportional Electric Non-spring Return Actuators 34-636- 1360, Rev. C Installation Instructions M9109-GGx-5 Issue Date March 2016 M9109-GGx-5 Series Proportional Electric Non-spring Return Actuators Installation IMPORTANT: Use this M9109-GGx-5 Series

More information

Acme Conduit Entry. String Combiner/Pass-Through. FOR PHOTOVOLTAIC INSTALLATION Installation Manual

Acme Conduit Entry. String Combiner/Pass-Through. FOR PHOTOVOLTAIC INSTALLATION Installation Manual Acme Conduit Entry String Combiner/Pass-Through FOR PHOTOVOLTAIC INSTALLATION Installation Manual Table of Contents Important Safety Instructions -----------------------------------------------------------------------------------------------------------

More information

INSTALLATION INSTRUCTIONS LIGHTPLANE 3.5. LP3.5 Suspended LED. A nd Avenue, Unit 1. CA P E W alwusa.

INSTALLATION INSTRUCTIONS LIGHTPLANE 3.5. LP3.5 Suspended LED. A nd Avenue, Unit 1. CA P E W alwusa. Oakland, INSTALLATION INSTRUCTIONS LIGHTPLANE 3.5 LP3.5 Suspended LED A 1035 22nd Avenue, Unit 1 n CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com Safety & Warnings! 1. Read all instructions.

More information

Installation Instructions

Installation Instructions Installation Instructions FHEZ10A24 FHEZ17A48 Page 1 of 7 IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. Do not mount near gas or electric heaters. 2. Do not attempt to service the battery.

More information

Albeo TM LED Luminaire Heavy Industrial High Bay Lighting (ABR1-Series)

Albeo TM LED Luminaire Heavy Industrial High Bay Lighting (ABR1-Series) GE Lighting Installation Guide Albeo TM LED Luminaire Heavy Industrial High Bay Lighting (ABR1-Series) Features UL 1598 Suitable for Wet Locations IP66 Rated Ingress Protection BEFORE YOU BEGIN Read these

More information

INSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1

INSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1 INSTALLATION INSTRUCTIONS MOONRING 1 LP1/MR1 Suspended, Ceiling LED n A 1035 22nd Avenue, Unit 1 Oakland, CA 94606 P 510.489.2530 E TalkToUs@alwusa.com W alwusa.com Safety & Warnings! 1. Read all instructions.

More information

INSTALLATION INSTRUCTION Aether 2 Shallow Recessed Housing

INSTALLATION INSTRUCTION Aether 2 Shallow Recessed Housing SAFETY INSTRUCTIONS IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation by a qualified electrician in accordance

More information

M Remote Mounting Kit

M Remote Mounting Kit M9203-100 Remote Mounting Kit M9203-100 Part No. 34-636-2308, Rev. A Issued August 29, 2014 Applications IMPORTANT: Use this M9203-100 Remote Mounting Kit only to control equipment under normal operating

More information

OmniAire Omnitec Design, Manufacturing Air Purification Equipment Since 1988

OmniAire Omnitec Design, Manufacturing Air Purification Equipment Since 1988 OmniAire 18000 Omnitec Design, Manufacturing Air Purification Equipment Since 1988 For your larger projects the OmniAire 18000 is the right tool. The modular design of this system allows for ease of transport

More information

Tetra minimax. LED Lighting System. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation Guide

Tetra minimax. LED Lighting System. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation Guide Installation Guide Volt Tetra minimax LED Lighting System GEMMRD-W, GEMMGL-W, GEMMBL-W BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSMENT RISK OF ELECTRIC SHOCK Turn

More information

M9300 Series Potentiometer Kits

M9300 Series Potentiometer Kits M9300 Series Potentiometer Kits Installation Instructions M9300-140, M9300-1K, M9300-2K, M9300-10K 34-636- 2480, Rev. C (barcode for factory use only) Part No. 34-636-2480, Rev. C Issued June 2017 Application

More information

PVM 220 Installation Guide

PVM 220 Installation Guide R CONFIG SCT DIO X INPUT NORMA VOICIFT NORMA PAGING OR ITIVITY PVM 0 Installation Guide The xtron PVM 0 is an enclosure for the safe mounting of PoleVault system devices in the plenum area of a suspended

More information

Lumination TM LED Luminaires Suspended LED Fixture (Series EP14)

Lumination TM LED Luminaires Suspended LED Fixture (Series EP14) GE Lighting Solutions Installation Guide Lumination TM LED Luminaires Suspended LED Fixture (Series EP14) Features Long life (50,000 hour rated life) 5 year warranty IP30 Dry location rated BEFORE YOU

More information

OSQ Series IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. LED Area Light TO INSTALL:

OSQ Series IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. LED Area Light TO INSTALL: OSQ Series LED Area Light Direct Pole Mount IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY

More information

Have a Bright Day! Nicholas Harmon President, Verilux, Inc.

Have a Bright Day! Nicholas Harmon President, Verilux, Inc. VF02 Dear Customer, Thank you for purchasing the Verilux EasyFlex Deluxe Natural Spectrum Floor Lamp. You have received a quality product, backed by a one year limited warranty. As a Verilux customer,

More information

M Remote Mounting Kit

M Remote Mounting Kit M9208-250 Remote Mounting Kit Installation Instructions M9208-250 Part No. 34-636-2200, Rev. A Issued August 29, 2014 Applications IMPORTANT: Use this M9208-250 Remote Mounting Kit only to control equipment

More information

M9109 Series Electric Non-spring Return Actuators

M9109 Series Electric Non-spring Return Actuators 34-636- 1190, Rev. D Installation Instructions M9109 Issue Date 03/1/16 M9109 Series Electric Non-spring Return Actuators Installation IMPORTANT: Use this M9109 Series actuator only to control equipment

More information

LIEBERT BATTERY INTERFACE BOX : UPSBIBX, UPSBIBN AND UPSBIBR

LIEBERT BATTERY INTERFACE BOX : UPSBIBX, UPSBIBN AND UPSBIBR LIEBERT BATTERY INTERFACE BOX : UPSBIBX, UPSBIBN AND UPSBIBR Product Specification/Installation SheetLiebert EXL, Liebert EXL S, Liebert NX -6 and Liebert NXL SAVE THESE INSTRUCTIS This manual contains

More information

Installation Instructions

Installation Instructions Installation Instructions If you have questions, call 800.GE.CARES or visit our website at: www.monogram.com ZV950 36" Stainless Steel Vent Hood Safety Information BEFORE YOU BEGIN Read these instructions

More information

Lumination TM LED Luminaires LAL Series - Continuous Run Option

Lumination TM LED Luminaires LAL Series - Continuous Run Option GE Lighting Installation Guide Lumination TM LED Luminaires LAL Series - Continuous Run Option BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT RISK OF ELECTRIC

More information

VA-4233-AGx Series Electric Valve Actuators

VA-4233-AGx Series Electric Valve Actuators Installation Instructions VA-4233 No. 1 Issue Date June 30, 2014 VA-4233-AGx Series Electric Valve Actuators Installation Refer to Figures 2 through 4 for proper actuator orientation before attempting

More information

VA9905 Actuator and VG1600 Series Six-Way Valves

VA9905 Actuator and VG1600 Series Six-Way Valves VA9905 Actuator and VG1600 Series Six-Way Valves Installation Instructions *148836003206A* Contents Compliance Information...1 About This Document...1 Accessories...1 Support Information...1 Parts Included...2

More information

LS1 SERIES IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF LINEAR SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.

LS1 SERIES IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF LINEAR SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE. The LS1 Series of commercial and industrial LED fixtures is designed to be used in utility strip applications using suspension or surface mount installation. The LS1 Series is designed for use in 120 277V,

More information

MNBE-8D2x2 INSTRUCTIONS

MNBE-8D2x2 INSTRUCTIONS MNBE-8D2x2 INSTRUCTIONS MNBE-8D2x2 OUTDOOR 3R ENCLOSURE MNBE-8D2x2 Battery Enclosure with locking door and one shelf. Outdoor 3R rain type design. Powder coated aluminum and stainless steel construction.

More information

WASP-P PRESSURE SENSOR

WASP-P PRESSURE SENSOR WASP-P PRESSURE SENSOR USER MANUAL VERSION 03.22 15/03/2016 WASP is a registered trademark owned by BossPac Engineering & Technology WASP is a PATENT PENDING technology owned by BossPac Engineering & Technology

More information

ELV1abbccd-e. Color Temperature: 30 = 3000K White 35 = 3500K White 40 = 4000K White 45 = 4500K White 50 = 5000K White

ELV1abbccd-e. Color Temperature: 30 = 3000K White 35 = 3500K White 40 = 4000K White 45 = 4500K White 50 = 5000K White GE Lighting Immersion TM Elite LED Refrigerated Display Lighting End Mullion Lights for Vertical Cases Installation Guide ELV1abbccd-e Prefix: EL = Elite V = Vertical FD = French Door 1 = Generation Light

More information

INSTALLATION INSTRUCTION Aether 3.5 Color Tunable LED Downlight

INSTALLATION INSTRUCTION Aether 3.5 Color Tunable LED Downlight SAFETY INSTRUCTION IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation by a qualified electrician in accordance

More information

M9109-GGx-4 Series Proportional Electric Non-Spring Return Actuators

M9109-GGx-4 Series Proportional Electric Non-Spring Return Actuators 34-636- 1484, Rev. B Installation Instructions M9109-GGx-4 Issue Date March 2016 M9109-GGx-4 Series Proportional Electric Non-Spring Return Actuators Installation IMPORTANT: The M9109-GGx-4 Series Electric

More information

M9106-GGx-4 Series Proportional Electric Non-Spring Return Actuators

M9106-GGx-4 Series Proportional Electric Non-Spring Return Actuators M9106-GGx-4 Series Proportional Electric Non-Spring Return Actuators 34-636- 1468, Rev. B Installation Instructions M9106-GGx-4 Issue Date March 2016 Installation IMPORTANT: The M9106-GGx-4 Electric Actuator

More information

WARNING/AVERTISSEMENT. Coupez l alimentation électrique à la boîte de fusibles ou au disjoncteur avant servicing or installing product.

WARNING/AVERTISSEMENT. Coupez l alimentation électrique à la boîte de fusibles ou au disjoncteur avant servicing or installing product. Tetra Contour LS LED Lighting System GEXNLBL-1, GEXNLGL-1, GEXNLRD-1, GEXNL65-1, GEXNL32-1 Installation Guide 24 Volt BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT

More information

Wet Rated Batten LED Luminaire

Wet Rated Batten LED Luminaire Installation Guide Wet Rated Batten LED Luminaire LED Lighting System BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING / AVERTISSEMENT RISK OF ELECTRIC SHOCK Turn power off before

More information

HOMELINK DOOR OPENER KIT

HOMELINK DOOR OPENER KIT HOMELINK DOOR OPENER KIT P/N 2882082 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain

More information

M9300 Series Switch Kits

M9300 Series Switch Kits M9300 Series Switch Kits Installation Instructions M9300-1, M9300-2 34-636- 2472, Rev. C (barcode for factory use only) Part No. 34-636-2472, Rev. C Issued June 2017 Application Requirements Refer to the

More information

UB-2 2 Universal Button

UB-2 2 Universal Button UB-2 2 Universal Button UB-2/LTUL Universal Button with Latching Timer ADA Compliant For UB-2/LTUL the enclosed timer is to be used and installed per the enclosed LT-1UL installation sheet. For access

More information

Have a bright day! Nicholas Harmon President, Verilux, Inc.

Have a bright day! Nicholas Harmon President, Verilux, Inc. Model: VF02 Dear Customer, Thank you for purchasing the Verilux EasyFlex Deluxe Natural Spectrum Floor Lamp. You have received a quality product, backed by a one year limited warranty. As a Verilux customer,

More information

Fan Relay Board (FRBii) Assembly

Fan Relay Board (FRBii) Assembly Fan Relay Board (FRBii) Assembly Installation, Operation, and Maintenance Instructions PK-FCU030-0, PK-FCU050-0 Part No. 24-10143-1221, Rev. A Issued February 2017 Application Refer to the QuickLIT website

More information

LUNERA VERTICAL E26 LED FLOODLIGHT LED Replacement for E26 Medium Base Floodlights Type B Ballast Bypassed

LUNERA VERTICAL E26 LED FLOODLIGHT LED Replacement for E26 Medium Base Floodlights Type B Ballast Bypassed Installation Guide LUNERA VERTICAL E26 LED FLOODLIGHT LED Replacement for E26 Medium Base Floodlights Type B Ballast Bypassed Installation Description The LUNERA VERTICAL E26 LED FLOODLIGHT is a line driven

More information

Assembly and Operation Manual

Assembly and Operation Manual Adjustable Base Assembly and Operation Manual Table of Contents Safety Precaution and Usage Guide...2 To decrease the risk of electronic shock... 2 Adjustable base performance... 3 Restrictions of your

More information

GETTING STARTED WITH IN-WALL DIMMER SWITCH

GETTING STARTED WITH IN-WALL DIMMER SWITCH GETTING STARTED WITH IN-WALL DIMMER SWITCH This document is the property of Webee L.L.C. The data contained here, in whole or in part, may not be duplicated, used or disclosed outside the recipient for

More information

Installation Instructions

Installation Instructions Installation Instructions If you have questions, call 800-GE-CARES or visit our website at: www.monogram.com 30", 36" and 48" Professional Restaurant Style Vent Hoods Models: ZV48R ZV36R ZV30R 1 Monogram.

More information

Installation Instructions

Installation Instructions Installation Instructions If you have questions, call 800.GE.CARES or visit our website at: www.monogram.com 30", 36" and 48" Professional Restaurant Style Vent Hoods Models: ZV48R ZV36R ZV30R 1 Installation

More information

M9106-AGx-2N0x Series Electric Non-Spring Return Actuators

M9106-AGx-2N0x Series Electric Non-Spring Return Actuators 34-636- 1077, Rev. C M9106-AGx-2N0x Series Electric Non-Spring Return Actuators Installation Instructions M9106AGx-2N0x Issue Date March 2016 Installation IMPORTANT: Use this M9106-AGx-2N0x Series Actuator

More information

SOLA SM and SOLA SM 365 Light Engine Instruction Manual

SOLA SM and SOLA SM 365 Light Engine Instruction Manual SOLA SM and SOLA SM 365 Light Engine Instruction Manual Lumencor, Inc. Document Number 57-10003, Rev. A www.lumencor.com Regulatory Models Lumencor utilizes regulatory model names for all certified and

More information

CSD Series Current Devices Split Core

CSD Series Current Devices Split Core CSD Series Current Devices Split Core Installation Instructions CSD-CF0A0-1 CSD-CF0J0-1 CSD-CA1G0-1 Part. 24-10345-34, Rev. D Issued March 31, 2014 Supersedes April 5, 2013 Applications The Current Switch

More information

Installation Instructions

Installation Instructions Installation Instructions If you have questions, call 800.GE.CARES or visit our website at: www.monogram.com 30", 36" and 48" Professional Vent Hoods Models: ZV48T, ZV48S ZV36T, ZV36S ZV30T, ZV30S 1 Installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INDIGO-CLEAN TECHNOLOGY RETROFIT KIT INSTALLATION INSTRUCTIONS 1 IMPORTANT SAFETY INFORMATION Risk of shock. Disconnect power before installation. DANGER- RISQUE DE CHOC- COUPER L ALIMENTATION AVANT L

More information

Troubleshooting Guide

Troubleshooting Guide Troubleshooting Guide Current Revision: June 2009 Table of Contents PAGE IMPORTANT NOTES ------------------------------------------------------------------- 3 20T Main Electrical System --------------------------------------------------------------

More information

LST Solid-State Starter User s Manual TB WOOD S INCORPORATED

LST Solid-State Starter User s Manual TB WOOD S INCORPORATED Form 1276A TM LST Solid-State Starter User s Manual TB WOOD S INCORPORATED Chambersburg, Pennsylvania TRADEMARK NOTICE TB Wood s and are registered trademarks of TB Wood s Incorporated. is a trademark

More information

Installation Instructions

Installation Instructions at :: rangehoods. com Call 1-800-667-8721 anywhere in the US and Canada - www.rangehoods.com Installation Instructions 30", 36" and 48" Restaurant Style Vent Hoods Models: ZV48R ZV36R ZV30R Monogram. We

More information

RAPID SHUTDOWN COMBINER

RAPID SHUTDOWN COMBINER RAPID SHUTDOWN COMBINER Installation and Operation Guide Revision B 2017, Yaskawa Solectria Solar IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS 1. General Safety Information This manual contains

More information

INSTALLATION INSTRUCTION Bollard Light 12V

INSTALLATION INSTRUCTION Bollard Light 12V Bollard Light 12V 6611/6621/6631/6641/6651 SAFETY INSTRUCTION IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation

More information

Air Purification Unit. Operation and Maintenance Manual

Air Purification Unit. Operation and Maintenance Manual Air Purification Unit Operation and Maintenance Manual WARNING Do not use with combustible or explosive material. Do not expose to water or rain. Connect only to grounded outlet with GFCI device. Disconnect

More information

Electric Vehicle Supply Equipment

Electric Vehicle Supply Equipment Electric Vehicle Supply Equipment By Control Module Inc, EVSE LLC State of the Art EVSE with Cable Management Electrician EVSE Tester Model 3840-001 User Guide Model 3840-001 Electrician EVSE Tester Patents

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 6400 Vehicle Dock INSTALLATION INSTRUCTIONS " " " " " " " " " " " " " " " " " " " " " " " " " " " " PN: 962-020-006 Revision B August 1998 " NOTICE The information contained herein is proprietary and is

More information

INSTALLATION GUIDE Works in double and single ended wiring.

INSTALLATION GUIDE Works in double and single ended wiring. ISTAATIO GUIDE Works in double and single ended wiring. -1- Safety Precautions For your and others safety, please read the precaution carefully before installation: (1). Product should be installed by

More information

BIODEX Biodex Medical Systems, Inc.

BIODEX Biodex Medical Systems, Inc. SOUND PRO COMBINATION TABLE OPERATION MANUAL 058-710 058-715 BIODEX Biodex Medical Systems, Inc. FN: 08-233 Rev C 6/15 Sound Pro Combination Table This manual covers operation procedures for the following

More information

FITTING INSTRUCTIONS FOR CP0404BL/WH NO-CUT AERO CRASH PROTECTORS HUSQVARNA 701 ENDURO/SUPERMOTO 2016-

FITTING INSTRUCTIONS FOR CP0404BL/WH NO-CUT AERO CRASH PROTECTORS HUSQVARNA 701 ENDURO/SUPERMOTO 2016- FITTING INSTRUCTIONS FOR BL/WH NO-CUT AERO CRASH PROTECTORS HUSQVARNA 701 ENDURO/SUPERMOTO 2016- Page 1 PICTURE A PICTURE B REAR OF BIKE FRONT OF BIKE PICTURE C THIS KIT CONTAINS THE ITEMS PICTURED AND

More information

(SB2) (SB1) (SB3) (SB5) (SB4) Cylindrical Installation Instructions. A. CHECKLIST (4 each AA Batteries Included) (SB1) (SB4) (SB2) (SB6) (SB6) (SB3)

(SB2) (SB1) (SB3) (SB5) (SB4) Cylindrical Installation Instructions. A. CHECKLIST (4 each AA Batteries Included) (SB1) (SB4) (SB2) (SB6) (SB6) (SB3) A. CHECKLIST (4 each AA Batteries Included) FOR DOOR AND FRAME PREPARATION INSTRUCTIONS, SEE APPENDIX A OR GO TO PROXESS.COM Parts List: Each Proxess C-Series lockset includes Exterior lock assembly (include

More information

VWM SERIES U L R. Instruction Sheet. Vertical Wall Mount Rack LISTED

VWM SERIES U L R. Instruction Sheet. Vertical Wall Mount Rack LISTED Instruction Sheet VWM SERIES Vertical Wall Mount Rack C U L R LISTED US THANK YOU Thank you for purchasing the VWM Series. Please read these instructions thoroughly before installing or assembling this

More information

INSTALLATION INSTRUCTION Oculux 3.5" Architectural Downlight R3CRN-11, R3CSN-11

INSTALLATION INSTRUCTION Oculux 3.5 Architectural Downlight R3CRN-11, R3CSN-11 . INSTALLATION INSTRUCTION SAFETY INSTRUCTION IMPORTANT: NEVER attempt any work without shutting off the electricity. Read all instructions before installing. System is intended for installation by a qualified

More information

ED900. Low energy operator. Installation instructions: T/slide channel/pull arm mounting

ED900. Low energy operator. Installation instructions: T/slide channel/pull arm mounting Low energy operator Installation instructions: T/slide channel/pull arm mounting TABLE OF CONTENTS Operator overall Accessories External activation device minimum requirements Contact ratings Locking device

More information

Installation Instructions If you have questions, call 800-GE-CARES or visit our website at:

Installation Instructions If you have questions, call 800-GE-CARES or visit our website at: Installation Instructions If you have questions, call 800-GE-CARES or visit our website at: www.monogram.com 30", 36" and 48" Professional Vent Hoods Models: ZV48T, ZV48S ZV36T, ZV36S ZV30T, ZV30S Monogram.

More information

IMMERSION. GE Lighting. OEM Installation Guide. imagination at work. LED Display Lighting

IMMERSION. GE Lighting. OEM Installation Guide. imagination at work. LED Display Lighting GE Lighting OEM Installation Guide IMMESION isplay Lighting efrigerated Vertical Cases V0 Series End Mullion Lights 750 mm (0-inch): GELT0050E-SY/-S (79778/79781), GELT0050EL-SY/-S (79779/7978), GELT000E-SY/-S

More information

M9102-AGA-3S and M9104-xGA-3S Series Electric Non-Spring Return Actuators

M9102-AGA-3S and M9104-xGA-3S Series Electric Non-Spring Return Actuators *346361433K* 34-636-1433, Rev.K M9102-AGA-3S and M9104-xGA-3S Series Electric Non-Spring Return Actuators Installation Instructions Part No. 34-636-1433, Rev. K Issued October 2017 Applications The M9102

More information

Verax 75 and Verax VPA Installation Manual

Verax 75 and Verax VPA Installation Manual Verax 75 and Verax VPA Installation Manual JP3 Measurement 4109 Todd Lane Austin TX 78744 512-537-8450 www.jp3measurement.com 1 Table Of Contents: 1. Facilities Requirements page 3 2. Unpacking and Handling

More information

TM-11x1 Series Room Temperature Module

TM-11x1 Series Room Temperature Module 24-10225- 4, Rev. C TM-11x1 Series Installation Instructions Part No. 24-10225-4, Rev. C Issued March 16 Applications The TM-11x1 Series of s are designed for use with the TC-9102 Direct Digital Control

More information

System 350 S350C Temperature Slave Stage Module

System 350 S350C Temperature Slave Stage Module FANs 930, 930.5, 125, 121 Product/Technical Bulletin Issue Date April 8, 2014 System 350 Temperature Slave Stage Module The Temperature Slave Stage Module is used in conjunction with the A350 Temperature

More information

Installation Instructions. Trakker Antares 2455/2475 DC Power Supply

Installation Instructions. Trakker Antares 2455/2475 DC Power Supply Installation Instructions Trakker Antares 2455/2475 DC Power Supply Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 U.S. service and technical support: 1-800-755-5505 U.S. media

More information

Installation Instructions

Installation Instructions PART NUMBER: CPLPCONV007A00 60,000---130,000 BTU/HR 2TO5TONS SMALL PACKAGED PRODUCTS GAS HEATING/ELECTRIC COOLING UNITS HIGH ALTITUDE ONLY 2001---6000 FT PROPANE CONVERSION KIT Installation Instructions

More information

Spun Bay Installation Standard Version (non dimmable), Hook Mount

Spun Bay Installation Standard Version (non dimmable), Hook Mount Spun Bay Installation Standard Version (non dimmable), Hook Mount WARNING: Make sure that all power is turned off while installing fixture. Do not turn power on until fixture is completely installed. Turn

More information

AUTOMATIC POOL COVER. Serial number: ENGLISH N'CARLIT MODEL INSTALLATION MANUAL AND MAINTENANCE /18 Revision number

AUTOMATIC POOL COVER. Serial number: ENGLISH N'CARLIT MODEL INSTALLATION MANUAL AND MAINTENANCE /18 Revision number AUTOMATIC POOL COVER N'CARLIT MODEL INSTALLATION MANUAL AND MAINTENANCE Serial number: Revision number: 002-2012-10-05 - 1 -/18 Revision number 002-2012-10-05 TABLE OF CONTENTS UNLOADING... 2 TOOLS REQUIRED

More information

AF7006 Alarming Camera Display Unit (6.5 ) AF7015 Alarming Camera Display Unit (4.5") AF7216 Camera Sensor

AF7006 Alarming Camera Display Unit (6.5 ) AF7015 Alarming Camera Display Unit (4.5) AF7216 Camera Sensor How to Setup a Display Unit AF700 or AF70 AF7 AF700 Alarming Camera Display Unit (. ) AF70 Alarming Camera Display Unit (.") AF7 Camera Sensor Battery-powered alarming system with AC power connections

More information

MNSOB Shut Off Box Instructions

MNSOB Shut Off Box Instructions MNSOB Shut Off Box Instructions MNSOB4X-4P MNSOB3R-4P The MNSOB Shut off boxes provide a Rapid System Shutdown as required by NEC 690.12. This Manual covers the following models: MNSOB4X-2P MNSOB4X-4P

More information

WARNING / AVERTISSEMENT

WARNING / AVERTISSEMENT TM Arize LED Lighting System Lynk & Life Installation Guide BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING / AVERTISSEMENT RISK OF ELECTRIC SHOCK RISQUES DE DÉCHARGES ÉLECTRIQUES

More information

Eaton 9395 High Performance* Sync Installation Controland Operation Manual

Eaton 9395 High Performance* Sync Installation Controland Operation Manual Eaton 9395 High Performance* Sync Installation Controland Operation Manual Installation and Operation Manual *Referenced throughout as 9395P Eaton 9395 High Performance* Sync Installation Controland Operation

More information

A1100 GUARDIAN OVERFILL PREVENTION VALVE (with Installation Kit)

A1100 GUARDIAN OVERFILL PREVENTION VALVE (with Installation Kit) A1100 GUARDIAN OVERFILL PREVENTION VALVE (with 493192 Installation Kit) Assembly and Installation Instructions Important: Read these instructions completely and carefully before attempting to install and

More information

INSTALLATION GUIDE FOR VM-3000 SERIES INTEGRATED VOICE EVACUATION SYSTEM

INSTALLATION GUIDE FOR VM-3000 SERIES INTEGRATED VOICE EVACUATION SYSTEM For Service Technicians only INSTALLATION GUIDE FOR VM-3000 SERIES INTEGRATED VOICE EVACUATION SYSTEM This manual describes works to be performed with the unit's case open. Leave all these works to a qualified

More information

Portable Lawn Sprinkler and Multi-Use Pump

Portable Lawn Sprinkler and Multi-Use Pump Portable Lawn Sprinkler and Multi-Use Pump Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and

More information

Parent s Guide. This guide contains important information. Please keep it for future reference US

Parent s Guide. This guide contains important information. Please keep it for future reference US Parent s Guide This guide contains important information. Please keep it for future reference. 91-003324-000 US INTRODUCTION The Stack & Tumble Elephant TM provides a silly twist on the classic ring stacker.

More information