DIFFICULT ENVIRONMENTS
|
|
- Erik Shepherd
- 6 years ago
- Views:
Transcription
1 DIFFICULT ENVIRONMENTS HOT 121
2 three-dimensional trademark 40 mm 70 mm 100 mm 133 mm 1 T5 OR T8 LAMP - CLASS 1 EINSTEIN 100 IMPERVIOUS TUBULAR LIGHT FITTING FOR INDUSTRIAL APPLICATIONS TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360 orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning HOUSING Ø100 mm crystal quality polycarbonate diffuser Also available in coextruded polycarbonate/pmma for outdoor lighting and chemically aggressive environments, and in borosilicate glass for corrosive environments End caps 1/2 ring press-formed in 304L stainless steel (316L also available) Gaskets moulded in EPDM Cable entry with cable gland (disconnectable plug available) Possibility for a model with 2 cable entries for looping-in (2 entries on the same diffuser) PHOTOMETRY 1 T8 extensive reflector 2 T8 intensive reflector ƞ=83% ROBUST Mechanical assembly not affected by external mechanical and/or chemical aggression DURABLE High resistance to shocks and corrosion single-piece housing, materials and components selected to ensure long-term investment GEAR TRAY White powder coated steel sheet gear tray Low loss compensated ferromagnetic gear unit (EEI B1) Internal wiring with silicone isolation braided with glass fibre REFLECTORS White powder-coated gear tray acting as a reflector for general diffused lighting Range of technical reflectors in mirror-finish aluminium sheeting: intensive (narrow beam), extensive (wide beam) ELECTRICAL CLASS CLASS 1 FIRE RESISTANCE Polycarbonate 960 C Coex. polycarbonate/pmma 650 C Borosilicate glass non-flammable PROTECTION IP68/IP69K SHOCK RESISTANCE Polycarbonate IK10 Coex. polycarbonate/pmma IK10 Borosilicate glass IK07 OPERATING TEMPERATURE -20 C +70 C INSTALLATION MAINTENANCE Connection to 3x2.5 mm 2 detachable terminal block Attachment with 2 bolt-fitted stainless steel straps allowing variable centre distance and 360 orientation (available as a reinforced model and/or with closure by HSHC screw) Maintenance: release the 2 closing screws, remove the end cap and extract the gear tray
3 Variable centre distance MAIN REFERENCES POWER DESIGNATION CODE OPTICS L (mm) WEIGHT (kg) T8 VERSIONS Ferromagnetic gear unit for T8 lamps without reflector 1x18W EIN C G13 PO ,7 1x36W EIN C G13 PO ,2 1x58W EIN C G13 PO ,3 OPTIONS DIFFUSERS Coex. polycarbonate/pmma diffuser POME Borosilicate glass diffuser PY CABLE ENTRIES 1 or 2 cable glands in black polyamide Cable Ø: 5 to 12 mm 113/213 Cable Ø: 7 to 14 mm 116/216 1 or 2 cable glands in nickel-coated brass Cable Ø: 5 to 14 mm 113LN/213LN Disconnectable plug IP68/IP69K plug, lockable with an aluminium threaded ring PS3 Solenoid valve type angled IP65 plug PB3 Disconnectable cord (length 0,80m) Output cord with a WIELAND IP68 plug CW3 GEAR UNIT 5-point terminal block for phase balancing C5P FINISHINGS End caps and fixing straps in 316L stainless steel MR FIXINGS Reinforced bolt-fitted fixing straps BRS Fixing straps with HSHC screw* BAV Reinforced bolt-fitted fixing straps with HSHC screw* BRV Anti-shock straps with HSHC screw* BAC (*Tamper-resistant Torx screw on request) ACCESSORIES Protective covers Fixing for columns Upstand kit (5 or 20 cm) EMERGENCY LIGHTING ARCHITECTURAL APPLICATIONS NORMAL ENVIRONMENTS SPECIAL APPLICATIONS HOT AND COLD ATEX DIFFICULT ENVIRONMENTS Option codes to be added or to replace the designation codes of main references, subject to the compatibility of options.
4 three-dimensional trademark 40 mm 70 mm 100 mm 133 mm 2 T5 OR T8 LAMPS - CLASS 1 EINSTEIN 133 IMPERVIOUS TUBULAR LIGHT FOR INDUSTRIAL APPLICATIONS TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360 orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning ROBUST Mechanical assembly insensitive to external mechanical and/or chemical aggression DURABLE High resistance to shocks and corrosion single piece casing, material and components selected to ensure long-term investment ELECTRICAL CLASS CLASS 1 FIRE RESISTANCE Polycarbonate 960 C Coex. polycarbonate/pmma 650 C Borosilicate glass PROTECTION SHOCK RESISTANCE Polycarbonate Coex. polycarbonate/pmma Borosilicate glass OPERATING TEMPERATURE non-flammable IP68/IP69K IK10 IK10 IK07-20 C +60 C HOUSING Ø100 mm crystal quality polycarbonate diffuser Also available in coextruded polycarbonate/pmma for outdoor lighting and chemically aggressive environments, and in borosilicate glass for corrosive environments End caps 1/2 ring press-formed in 304L stainless steel (316L also available) Gaskets moulded in EPDM Cable entry with cable gland (disconnectable plug available) Possibility for a model with 2 cable entries for looping-in (2 entries on the same diffuser) GEAR TRAY White powder coated steel sheet gear tray Low loss compensated ferromagnetic gear unit (EEI B1) Internal wiring with silicone isolation braided with glass fibre REFLECTORS White powder-coated gear tray acting as a reflector for general diffused lighting Range of technical reflectors in mirror-finish aluminium sheeting: intensive (narrow beam), extensive (wide beam) INSTALLATION MAINTENANCE Connection to 3x2.5 mm 2 detachable terminal block Installation with 2 bolt-fitted stainless steel straps with variable centre distance allowing 360 orientation (available as a reinforced model and/or with closure by HSHC screw) Maintenance: release the 2 closing screws, remove the end cap and extract the gear PHOTOMETRY 1 T8 model without reflector 2 T8 extensive reflector ƞ=87%
5 Variable centre distance MAIN REFERENCES POWER DESIGNATION CODE OPTICS L (mm) WEIGHT (kg) T8 VERSIONS Ferromagnetic gear unit for T8 lamps without reflector 2x18W EIN C G13 PO ,4 2x36W EIN C G13 PO ,6 2x58W EIN C G13 PO ,2 OPTIONS DIFFUSERS Coex. polycarbonate/pmma diffuser POME Borosilicate glass diffuser PY CABLE ENTRIES 1 or 2 cable glands in black polyamide Cable Ø: 5 to 12 mm 113/213 Cable Ø: 7 to 14 mm 116/216 1 or 2 cable glands in nickel-coated brass Cable Ø: 5 to 14 mm 113LN/213LN Disconnectable plug IP68/IP69K plug, lockable with an aluminium threaded ring PS3 Solenoid valve type angled IP65 plug PB3 Disconnectable cord (length 0,80m) Output cord with a WIELAND IP68 plug CW3 GEAR UNIT 5-point terminal block for phase balancing C5P FINISHINGS End caps and fixing straps in 316L stainless steel MR FIXINGS Reinforced bolt-fitted fixing straps BRS Fixing straps with HSHC screw* BAV Reinforced bolt-fitted fixing straps with HSHC screw* BRV Anti-shock straps with HSHC screw* BAC (*Tamper-resistant Torx screw on request) ACCESSORIES Protective covers Fixing for columns Upstand kit (5 or 20 cm) EMERGENCY LIGHTING ARCHITECTURAL APPLICATIONS NORMAL ENVIRONMENTS SPECIAL APPLICATIONS HOT AND COLD ATEX DIFFICULT ENVIRONMENTS Option codes to be added or to replace the designation codes of main references, subject to the compatibility of options.
6 122 three-dimensional trademark 40 mm 70 mm 100 mm 135 mm T MAX. 80 C - 1 OR 2 T8 LAMPS - GLASS DIFFUSER PAULI 1 HT 80 IMPERVIOUS TUBULAR LIGHT FITTING FOR USE AT HIGH TEMPERATURES TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360 orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning ROBUST Mechanical assembly not sensitive to external mechanical and/or chemical aggression DURABLE Borosilicate glass: high resistance to corrosion, chemical agents and temperatures Single-piece housing, material and components selected to ensure long-term investment ELECTRICAL CLASS CLASS 1 PROTECTION SHOCK RESISTANCE OPERATING TEMPERATURE IP68/IP69K IK07-20 C +80 C HOUSING Ø100 borosilicate diffuser in the 1-lamp model, Ø135 in the 2-lamp model End caps 1/2 ring press-formed in 304L stainless steel (316L also available) Gaskets moulded in silicone Cable entry with cable gland Possibility for a model with 2 cable entries for looping-in (2 entries on the same cap) GEAR TRAY White powder coated steel sheet gear tray Low loss compensated ferromagnetic gear unit (EEI B1) Internal wiring with silicone isolation braided with glass fibre REFLECTORS White powder-coated gear tray acting as a reflector for general diffused lighting Range of technical reflectors in mirror-finish aluminium sheeting: intensive (narrow beam), extensive (wide beam) INSTALLATION MAINTENANCE Connection to 3x2.5 mm 2 disconnectable terminal block Attachment with 2 bolt-fitted stainless steel straps with variable centre distance and allowing 360 orientation (available as a reinforced model and/or with closure by HSHC screw) Maintenance: release the 2 closing screws, remove the end-cap and extract the gear tray PHOTOMETRY 1 1-T8-lamp model extensive 2 1-T8-lamp model intensive 3 2-T8-lamp model extensive ƞ=83%
7 123 Variable centre distance MAIN REFERENCES POWER DESIGNATION CODE OPTICS L (mm) WEIGHT (kg) Ø100 borosilicate glass diffuser 1-lamp model 1x18W PAU1 HT80 118C G13 PY 113 BRS ,7 1x36W PAU1 HT80 136C G13 PY 113 BRS ,0 1x58W PAU1 HT80 158C G13 PY 113 BRS ,6 Ø135 borosilicate glass diffuser 2-lamp model 2x18W PAU1 HT80 218C G13 PY 113 BRS ,6 2x36W PAU1 HT80 236C G13 PY 113 BRS ,3 2x58W PAU1 HT80 258C G13 PY 113 BRS ,8 OPTIONS CABLE ENTRIES 1 or 2 cable glands in black polyamide Cable Ø: 5 to 12 mm 113/213 Cable Ø: 7 to 14 mm 116/216 1 or 2 cable glands in nickel-coated brass Cable Ø: 5 to 14 mm 113LN/213LN OPTICS Intensive reflector (1-lamp versions) RI Extensive reflector RE GEAR UNIT 5-point terminal block for phase balancing C5P Version 1 lamp 2 lamps FINISHINGS End caps and fixing straps in 316L stainless steel MR FIXINGS Reinforced bolt-fitted fixing straps with HSHC screw BRV ACCESSORIES Protective covers Fixing for columns Upstand kit (5 or 20 cm) EMERGENCY LIGHTING ARCHITECTURAL APPLICATIONS NORMAL ENVIRONMENTS SPECIAL APPLICATIONS HOT AND COLD ATEX DIFFICULT ENVIRONMENTS Option codes to be added or to replace the designation codes of main references, subject to the compatibility of options.
8 124 three-dimensional trademark 40 mm 70 mm 100 mm 135 mm T MAX. 100 C - 1 OR 2 T8 LAMPS - GLASS DIFFUSER - SEPARATE GEAR PAULI 1 HT 100 IMPERVIOUS TUBULAR LIGHT FITTING FOR USE AT HIGH TEMPERATURES TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360 orientation IMPERVIOUS (IP68/IP69K) Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning ROBUST Mechanical assembly not sensitive to external mechanical and/or chemical aggression DURABLE Borosilicate glass: high resistance to corrosion, chemical agents and temperatures Single-piece housing, material and components selected to ensure long-term investment ELECTRICAL CLASS CLASS 1 PROTECTION SHOCK RESISTANCE OPERATING TEMPERATURE IP68/IP69K IK07-20 C +100 C HOUSING Ø100 borosilicate diffuser in the 1-lamp model, Ø135 in the 2-lamp model End caps 1/2 ring press-formed in 304L stainless steel (316L also available) Gaskets moulded in silicone Cable entry with cable gland GEAR TRAY White powder coated steel sheet gear tray Offset low loss compensated ferromagnetic gear unit (EEI B1) Internal wiring with silicone isolation braided with glass fibre REFLECTORS White powder-coated gear tray acting as a reflector for general diffused lighting Range of technical reflectors in mirror-finish aluminium sheeting: intensive (narrow beam), extensive (wide beam) INSTALLATION MAINTENANCE Connection to 5x2,5 mm² disconnectable terminal block Connection on the gear tray to 6x2,5 mm² terminal block for 1-lamp models, to 7x2,5 mm 2 terminal block for 2-lamp models Maximum distance connection between the gear tray and the light fitting: 50 m Attachment with 2 bolt-fitted stainless steel straps with variable centre distance and allowing 360 orientation (available as a reinforced model and/or with closure by HSHC screw) Maintenance: release the 2 closing screws, remove the end-cap and extract the gear tray PHOTOMETRY 1 1-T8-lamp model extensive 2 1-T8-lamp model intensive 3 2-T8-lamp model extensive ƞ=83%
9 125 Variable centre distance MAIN REFERENCES POWER DESIGNATION CODE OPTICS L (mm) WEIGHT (kg) Ø100 borosilicate glass diffuser 1-lamp model 1x18W PAU1 HT CS G13 PY 113 BRS ,0 1x36W PAU1 HT CS G13 PY 113 BRS ,1 1x58W PAU1 HT CS G13 PY 113 BRS ,3 Ø135 borosilicate glass diffuser 2-lamp model 2x18W PAU1 HT CS G13 PY 113 BRS ,7 2x36W PAU1 HT CS G13 PY 113 BRS ,5 2x58W PAU1 HT CS G13 PY 113 BRS ,2 Separate gear tray, supplied with the light fitting POWER DIMENSIONS L (mm) l (mm) H (mm) WEIGHT (kg) 1x18W ,0 1x36W ,0 1x58W ,6 2x18W ,0 2x36W ,9 2x58W ,0 OPTIONS CABLE ENTRIES 1 cable gland in black polyamide Cable Ø: 5 to 12 mm 113 Cable Ø: 7 to 14 mm cable gland in nickel-coated brass Cable Ø: 5 to 14 mm 113LN OPTICS Intensive reflector (1-lamp versions) RI Extensive reflector RE Version 1 lamp 2 lamps FINISHINGS End caps and fixing straps in 316L stainless steel MR FIXINGS Reinforced bolt-fitted fixing straps with HSHC screw BRV ACCESSORIES Protective covers Fixing for columns Upstand kit (5 or 20 cm) EMERGENCY LIGHTING ARCHITECTURAL APPLICATIONS NORMAL ENVIRONMENTS SPECIAL APPLICATIONS HOT AND COLD ATEX DIFFICULT ENVIRONMENTS Option codes to be added or to replace the designation codes of main references, subject to the compatibility of options.
10 126 three-dimensional trademark 40 mm 70 mm 100 mm 135 mm T MAX. 200 C - 1 OR 2 INCANDESCENT LAMPS E27 - GLASS DIFFUSER PAULI 1 HT 200 IMPERVIOUS TUBULAR LIGHT FITTING FOR USE IN VERY HIGH TEMPERATURES TUBULAR Increased mechanical resistance Easy to clean Limited dirt accumulation 360 orientation IMPERVIOUS Absolute imperviousness No internal dust accumulation Maximum light output Adapted for pressure cleaning HOUSING Ø135 mm borosilicate diffuser End caps 1/2 ring press-formed in 304L stainless steel Gaskets moulded in silicone Cable entry with brass cable gland for cable Ø of mm GEAR TRAY Stainless steel plate with porcelaine E27 lamp-holder for high temperature incandescent lamp Internal wiring with high temperature silicone isolated wires INSTALLATION MAINTENANCE Connection to 3x2.5 mm 2 terminal block Attachment with 2 bolt-fitted stainless steel straps with a screw closure model Maintenance: release the 2 closing screws, remove the end-cap and extract the gear tray ROBUST Mechanical assembly not sensitive to external mechanical and/or chemical aggression DURABLE Borosilicate glass: high resistance to corrosion, chemical agents and high temperatures Single-piece housing, material and components selected to ensure long-term investment OPTIONS FINISHINGS End caps and fixing straps in 316L stainless steel FIXINGS Reinforced bolt-fitted fixing straps with HSHC screw Variable centre distance MR BRV ELECTRICAL CLASS CLASS 1 PROTECTION IP67 SHOCK RESISTANCE IK07 OPERATING TEMPERATURE T C MAX +200 C MAIN REFERENCES POWER DESIGNATION CODE L (mm) WEIGHT (kg) 1x60W max PAU1 HT200 1x60W E27 PY 113L BRS ,5 2x60W max PAU1 HT200 2x60W E27 PY 113L BRS ,0 Option codes to be added or to replace the designation codes of main references, subject to the compatibility of options.
11 24 rue des Amandiers F Paris T +33 (0) F +33 (0) enquiry@sammode.com Photo: Jean Ber We reserve the right to make technical changes Sammode - 08/2013 european area version
explosive environments Lighting
explosive environments Lighting CLASSIFICATION OF THE ZONES GAS AND VAPOURS DUST PRESENCE OF EXPLOSIVE ATMOSPHERE ZONE 0 ZONE 20 Category 1G Category 1D Permanent ZONE 1 ZONE 21 Category 2G Category 2D
More informationCRANACH 70. Amenity light fitting for outdoor
CRANACH 70 Amenity light fitting for outdoor CRANACH 70 OUTDOOR LIGHTING SAMMODE S AMENITY LIGHT FITTING Lighting spaces with outdoor traffic flows (entrances, bus shelters, etc.) demands the use of light
More informationDEMANDING ENVIRONMENT
DEMANDING ENVIRONMENT Demanding Environment Bering Celsius 70 Einstein 133 Einstein Agro 2.1 2.2 2.3 2.4 Fahrenheit 70 Niepce 70 FV Pascal Pauli 1 HT 2.5 2.6 2.7 2.8 Pauli 2 LT 2.9 BERING The Bering is
More informationCELSIUS 70 SA 613mm. Compact luminaires for small cold storage rooms -60 C
CELSIUS 70 SA 613mm Compact luminaires for small cold storage rooms -60 C CELSIUS 70 SA 613mm LOW TEMPERATURE LIGHTING LIGHTING FOR SMALL COLD STORAGE ROOMS WITH VERY LOW TEMPERATURE Lighting cold storage
More informationEMERGENCY. EYE Lighting Volume 6 Catalogue
EMERGENCY EYE Lighting Volume 6 Catalogue A-Line Coulomb Emlux Mini 8 6.1 6.2 6.3 6.4 Samson Twin Spot Volta 6.5 6.6 6.7 A-LINE EMERGENCY The A-Line is a high quality, low maintenance emergency luminaire
More informationIntroduction 1 Portfolio 9. Amenity light fittings Amenity lighting 31
Sammode lights railway station open-air platforms, nursery patios, school playgrounds, bus terminal passenger shelters, shopping centre exteriors, ferry terminal boarding points, apartment block walkways,
More informationThe Fila is a sleek architectural luminaire, designed for lighting public spaces and enhancing buildings.
FILA Clean lines The Fila is a sleek architectural luminaire, designed for lighting public spaces and enhancing buildings. Very sturdy thanks to its IK10 ++ / 80 joules diffuser, very elegant thanks to
More informationLinear Luminaire for Fluorescent Lamps Series ECOLUX 6600
> 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series 6600
More informationLight Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
More informationLighting for industrial refrigeration
Sammode lights the freezing tunnels of an ice cream factory, the storage chambers of an industrial bakery, the warehouses of a freezing logistics provider, the very low temperatures storage rooms for lactic
More informationEasy and safe installation
ATX LUMINAIRES 7 Easy and safe installation 1 2 3 Safety Plus : 1- Mounting can be completed with one hand 2- One handed opening using standard tool 3- Reflector swivels easy access 4- Terminal shield
More informationProtected
6.1 Protected 6.1 6.2 6.2 PPF1 PPF3 PPF4 PPF13 6.3 6.3 6.4 6.4 PPF11 PPF6 PPF5 PPF7 6.5 6.5 6.6 6.6 PPF8 PPF9 PPF10 PPF12 6.7 6.7 PPF14 1.9 1.9 1.10 1.10 1.11 1.11 1.12 1.10 Namibia- Pg 6 PPF1 Pluto vapourproof
More informationLight Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
More informationLinear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1
> For use in Zones 1, 2, 21, 22 and safe area > 2-lamp version: 18 W 36 W > Housing made of sheet steel or stainless steel SS304 / > Quick fasteners www.stahl.de 15709E00 The light fittings of Series ECOLUX
More informationEmergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy
www.stahl.de > For fluorescent lamps 2 x 18 W and 2 x 36 W > Electronic ballast with integrated emergency light electronics > Battery is integrated in the lamp enclosure > For emergency light mode 1.5
More information110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W
/27 V - 2/2 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE 963 39 Fluo 2 x 8 W 963 37 Fluo W 963 36 Fluo 2 x 8 W 8, 36 and 8 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G3
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6401
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp
More information7 Lighting Technology
7 Lighting Technology Pendant Light Fitting IEC 10560E00 For use in Zone 2 Zone 21 and Zone 22 Three sizes are available size 1 up to 150 W size 2 up to 250 W size 3 up to 600 W Available light sources
More informationEcospot LED floodlights
Ecospot LED floodlights Design: Roy Fleetwood Ecospot is a floodlight series which was designed specifically for LEDs. They offer extremely narrow beam light distribution with very little scattered light
More informationGENERAL ALUMINIUM FLOODLIGHT For general area lighting
GUARDIAN CAST ALLOY FLOODLIGHT High Efficiency asymmetric floodlight, incorporating 400W metal halide or sodium Designed and manufactured to comply with EN 60598 and is CE certified. 434 167 lamps. SON:
More informationFree-Form Optics. Heavy Duty Bulb. Heavy Duty Mounts
Free-Form Optics Nordic Lights through their expertise in lens and reflector technology offer a range of light patterns to satisfy the varied and specialist lighting requirements of the mining, heavy duty
More informationINDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01
INDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01 Page LED Roadway Lighting Atlas Basic LED Roadway...1-2 ROADWAY LIGHTING Atlas LED Roadway...3-4 Atlas Evo LED Roadway I...5-6 Atlas Evo LED Roadway
More informationRONDO-01 TECHNICAL SHEET. Outdoor architectural projector. About the product RONDO-01-80W, RONDO-01-35W, RONDO-01-20W, RONDO-01-70W
No. 99 / 08.01.2014, Edition No. 10, 1/5 Outdoor architectural projector RONDO-01 RONDO-01-80W, RONDO-01-35W, RONDO-01-20W, RONDO-01-70W About the product The projector RONDO-01 is designed for architectural
More informationINDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01
INDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01 Page LED Outdoor Commercial Lighting Venus LED Bulkhead...1-2 Vesta LED Bulkhead...3-4 Jupiter LED Bulkhead...5-6 Cube LED Bulkhead...7-8 LED Up-Down
More informationEcospot LED floodlights
Ecospot LED floodlights Design: Roy Fleetwood Ecospot is a floodlight series which was designed specifically for LEDs. They offer extremely narrow beam light distribution with very little scattered light
More informationFloodlight fittings HPS, MH or Halogen Floodlight fitting XSF, XQF, XEF - Zones 1, 2
Features Wide or narrow beam Ex e integral junction box Flat or pole mounting Supplied with lamp installed Including accessories (cable gland & plug) Supplied with offshore grade paint Manufactured from
More informationEmergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608
> For fluorescent lamps 2 x 18 W and 2 x 36 W > For emergency light operation periods of 1.5 or 3 hrs > During emergency time: If emergency lamp broken changing to the other lamp > Battery case which can
More information130 streetlights & floodlights
130 www.beghelli.cz streetlights & floodlights Tereza 50-01 132 Santo 0146 134 Santo 0147 135 Pelsan - Turkey Pelsan - Turkey Pelsan - Turkey Krono 5611-261 136 Euro 5611-270 137 Marco 5611-280 138 www.beghelli.cz
More informationMACH 3 D10,5 D10,5 D10,5. Light as star
11 116 335 379 MACH 3 246 6 6 D1,5 D1,5 D1,5 Light as star The Mach 3 floodlight has been designed to offer the ultimate in technical prowess, especially with regard to new, high-performing sources of
More informationFloodlight Series 6521/4
> The enclosure made of stainless steel V4A, V2A or powder coated sheet steel is available > Broad or narrow beam reflectors and/or asymmetrical lamp fitting > Series 6521/3 explosion protected floodlight
More information7 Lighting Technology
7 Lighting Technology Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608 The single-battery-supplied emergency lamps of the ECOLUX 6608 lighting series are employable as safety lighting
More informationIndustrial luminaires
Industrial luminaires acciaio When rapidity is money......you install 4 fittings in the time of 1 Industrial luminaires T5 and T8 Material: body: in zinc steel painted color: gray Degree of protection:
More informationEXEL-L. Detail of the internal side. Transparent polycarbonate
EXEL-L - Complete with high efficiency LED tubes - Quick access to the internal electrical equipment - Double locking system operated by hexagonal-head tool - Zone 1, 2, 21, 22 Reinforced polyester resin
More informationAVN. - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C. Ex n. Stainless steel clips
AVN - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C Transparent polycarbonate diffuser Stainless steel clips Polyamide cable gland and plug
More informationW A T E R P R O O F A N D C L E A N R O O M LUMINAIRES
W A T E R P R O O F A N D C L E A N R O O M LUMINAIRES Hygeia Functional, fully closed recessed luminaire for 2 or 3 TL-D fluorescent lamps for application in cleanrooms and dust-/water-ingress protected
More informationT U N N E L A N D U N D E R P A S S LIGHTING
T U N N E L A N D U N D E R P A S S LIGHTING Indoor Indoor Tunnelite TGX220 Tunnel luminaire suitable for use with 18-58W TL-D lamps. Tunnelite TGX220 Type Features Light source Lamp included Gear Optic
More informationPROTECTA III. Construction Tough glass reinforced polyester body
PROTECTA III 20 Construction Tough glass reinforced polyester body Polycarbonate diffuser with high resistance to UV and stress cracking Robust hinges and multipoint compressive clamping of diffuser closure
More informationTubular fittings Tubular fluorescent fitting XFF - Zones 1, 2 & 21, 22
Tubular fluorescent fitting XFF - Zones 1, & 1, Features All components mounted on sliding gear tray for easy installation and maintenance Standard components used inside body allowing reduced maintenance
More informationIndustrial luminaires
Industrial luminaires Acciaio 112 Leader BS 101 114 Leader BS 103 3G 115 Leader BS 111 116 Leader BS 113 117 Leader 21-01, 21-04 118 BS100, BS110 119 Tores 23-01 120 Castor 25-05 121 Lumino 26-91 122 Leo
More informationCompact. Walk over.
118 Compact Walk over In-ground fitting that keeps mm recessing depth independently from the models. It assures high precision in the optical control and homogenous light distribution on the facade. Even
More informationTUBE. Precise construction encourages reliable IP rating. Bi-directional light output with single light source. Choices of light distribution angles.
TUBE TUBE TUBE family is available in 4 different sizes. They are protected from the ingress of dust and water and are used in both outdoor and indoor environments. Operating with PAR, Compact Fluorescent,
More informationTubular fittings Tubular fluorescent fitting with automatic switch off XFP - Zones 1, 2 & 21, 22
Tubular fluorescent fitting with automatic switch off Features Quick and easy insulation switch for safe maintenance Ex e integral junction box All components mounted on sliding gear tray for easy installation
More informationTITAN. A range of elegant technical luminaires designed to withstand extreme vandalism in public spaces. 114 / Securlite
TITAN A range of elegant technical luminaires designed to withstand extreme vandalism in public spaces. More light, less maintenance: the Titan is the long-life lighting solution that project owners and
More informationArc IP 66 IP 66 IK 08 IK 09 Class I Class II (SIP) (DIP ) (Glass) (Bowl)
IP 66 IP 66 IK 08 IK 09 Class I Class II (SIP) (DIP ) (Glass) (Bowl) Complete and multi-functional range in a modern timeless design and with highly valued concepts like Double Ingress Protection (DIP),
More informationISTHAR 66 LED ISTHAR 88 LED ISTHAR 110 LED
ISTHAR LED ISTHAR LED ISTHAR LED is a range of IP66 surface-mounted luminaires made of extruded aluminium for LED light sources. Available in three different power options, each has a specific length:
More informationFloodlight LED Series 6525
www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of single-coated stainless
More informationLinear fittings EVDL LED fitting - zones 21, & 22
ABB DTS LINEAR FITTINGS - EVDL LED FITTING - ZONES 21 & 22 77 Linear fittings EVDL LED fitting - zones 21, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield
More informationCeiling-recessed downlights for metal halide lamps and LEDs
for metal halide lamps and LEDs The range of ceiling mount recessed downlights for miniature metal halide lamps and LEDs is characterised by extremely compact dimensions and a high degree of flexibility.
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationLinear fittings EVTL Weatherproof LED fitting - Industrial applications
89 Linear fittings LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted
More informationLinear fittings EVTL Weatherproof LED fitting - Industrial applications
89 Linear fittings LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted
More informationPracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht
prachteck Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht acht Pracht Pracht Pracht Pracht EDITION Pracht
More informationOperating Instructions
Operating Instructions Pendant Light Fitting > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Notes Regarding Safety...3 4 Intended Area of Application...4 5 Technical Data...5
More informationNightscape High performance floodlights and spotlights for discharge lamps
Nightscape High performance floodlights and spotlights for discharge lamps Nightscape is a range of floodlights and spotlights which offers new possibilities for the architectural illumination of buildings.
More informationCompact corrosion resistant, weather proof IP 65 flood light with integral gear tray for use with 70W HPS, 70W/150W HQI and 80W MBF lamps.
AZAR LAMP COMPARTMENT CORROSION RESISTANT, WEATHER PROOF COMPACT FLOODLIGHT RANGE Compact corrosion resistant, weather proof flood light with integral gear tray for use with 70W HPS, 70W/150W HQI and 80W
More informationSEALA. Dust & Moisture Proof Luminaire
SAA Dust & Moisture Proof uminaire SAA Dust & Moisture Proof SAA dust & moisture proof luminaire is Megalite state of the art design, for various indoor dusty and humid area lighting applications. High
More informationSPECIFICATION SHEET ORION ROAD LANTERN. IP66 RATED CRI. 230v /50hz
ORION ROAD LANTERN Arc shape cooling guide design, resulting in effective heat dissipation and dust removal ability Combined optical lens, ideal for road lighting requirements Power-off protection socket,
More informationEmergency Light Fitting for Fluorescent Lamps Series 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationIndustrial LED lighting ENERGY SAVING
www.disano.it Industrial lighting ENERGY SAVING 2 Industrial lighting Echo Led The best of the technology applied to a product that has been a leader in the market for years thanks to the exceptional quality
More informationATX FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
More informationCompact Emergency Light Fittings Series C-LUX 6108 / 6508
> Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5
More informationTECHNICAL MANUAL. 300RCB Searchlight and Control System. Den Haan Rotterdam
TECHNICAL MANUAL 300RCB Searchlight and Control System SINCE 1922 Den Haan Rotterdam (Intentionally blank page) 2 ! Safety notes: Turn power off before inspection, installation or removal Keep combustible
More informationFHL. Ex d. Body in aluminium
Ex d FHL Body in aluminium - Zones 1, 2, 21, 22 - Integrated electronic ballast - Power supply 24 V DC - Compact 24/36 W fluorescent tube - Degree of protection IP66 Guard in stainless steel Polycarbonate
More informationETC310-FS LED
1/6 Description IP67. IK10+. Stainless steel construction including PCS hardware. Safety glass lens with opal diffuser, max. load 5 tonnes. Luminaire can be driven over at low speed. Silicone rubber gasket.
More informationTUNNEL54. Safety and fire resistance VENTILATION LIGHTING
TUNNEL54 Safety and fire resistance VENTILATION LIGHTING 238 TUNNEL54 Safety and fire resistance VENTILATION TUNNEL54 fire resistant sockets for ventilators Page 240 LIGHTING TUNNEL54 junction boxes with
More informationTubo. Design: Eduardo Souto de Moura
Tubo Design: Eduardo Souto de Moura Designed to be an all-purpose individual luminaire, Tubo is a classic example of form joined with function. Office, parking lot, industry, kitchen, gymnasium, transparent,
More informationLinear Luminaire with LED Series EXLUX 6002/2 Version IIC
> For use in hazardous areas with gas group IIC > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking
More informationDE 02 Ceiling Luminaire, recessed
0014 0015 0016 0014-001 0015-003 0016 DE 02 Ceiling Luminaire, recessed Housing: phosphate coated steel,powder coated white Diffuser: polycarbonate, opal Fascia: gold, silver, white 2x18W/2x36W Applications:
More information13.1. Range of Enclosures. KRONECTION Box A 2 for up to 2 pairs. Expert Knowledge. Short survey of the KRONECTION Box A 2 for up to 2 pairs
KRONECTION Box A 2 for up to 2 pairs Short survey of the KRONECTION Box A 2 for up to 2 pairs The KRONECTION Box A 2, which is equipped with connection contacts on the right and left, serves as a line
More informationWe provide you with solutions
NEWS 2005 We provide you with solutions Professional solutions mean more than good design and products which are technically good. They mean being party to a process and contributing practical solutions
More informationRING FLAT. Drive over.
162 RING FLAT Drive over RING-FLAT is an innovative combination of low recessing depth, high mechanical resistance and excellent lighting performance. RING-FLAT is available in 5 sizes and different light
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationLinear fittings EVNL LED fitting - zones 2, & 22
65 Linear fittings EVNL LED fitting - zones 2, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress
More informationTriangolo. Small Triangolo. Large Triangolo. Small Triangolo Fresnel lens. Large Triangolo. Fresnel lens. Small Triangolo Diamond lens
Triangolo Small Triangolo Registered patent Large Triangolo Small Triangolo Large Triangolo Small Triangolo Diamond lens 1987: Triangolo takes the market. Since that time Triangolo is the original and
More informationCYCLO design Roberto Fiorato
CYCLO design Roberto Fiorato 146 PRISMA ARCHITECTURAL A variety of in-ground recessed fittings, with versions designed to take the load and impact from vehicles and pedestrians. Cover options in aluminium
More informationATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen
Applications Designed for large area lighting in industrial outdoor and indoor hazardous areas. Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industry. In locations such as: refineries,
More informationUV16 vandal resistant, wet/damp location emergency lighting
UV16 vandal resistant, wet/damp location emergency lighting 120/277 VAC, 60 Hz dual voltage input Maintenance-free, sealed lead calcium battery Molded from high-impact polycarbonate Simplified installation
More informationSAPPHIRE 1 SAPPHIRE 2 SAPPHIRE 3
SAPPHIRE 1 SAPPHIRE 2 SAPPHIRE 3 ADVANTAGES Sealsafe IP 66 maintained over time Innovative, high-performance photometry Easilok locking mechanism (Sapphire 1 and 2) Easy maintenance Adjustable inclination
More information7 Lighting Technology
7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:
More informationPacific functional and flexible
2012, September 28 Pacific functional and flexible Pacific BCW216 LED Pacific BCW216 is a functional dust-, jet-, shock- and vandalproof luminaire, and can accommodate both TL-D and TL5 (16 mm) fluorescent
More informationDirect drive electronic position indicators
Direct drive electronic position indicators DD51-E ELESA original design Direct drive electronic position indicators with battery power supply Base and case High-resistance polyamide based (PA) technopolymer.
More informationFloodlight LED Series 6525
www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of sheet steel single powder
More informationLighting Symbols. Rotating LED LED light source with rotating reflector. LED. Rotating Halogen Halogen bulb light source with rotating reflector.
LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.
More informationI Ex-e/Ex-i terminal box I
ID TAG label & bracket Door document holder opti. Security padlock Hasp opti. Technical data Marking accd. to 94/9/EC II G Ex e II / II D Ex td A1 IP66 Temperature class T6 up to +40 C / T5 up to +55 C
More informationFE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
: : Applications Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
More informationSLEE. - Suitable for high (+55 C) and low (-50 C) temperatures - Elevated degree of protection IP67 - IIB + H2 marking (hydrogen) - Zones 1, 2, 21, 22
SLEE - Suitable for high (+55 C) and low (-50 C) temperatures - Elevated degree of protection IP67 - IIB + H2 marking (hydrogen) - Zones 1, 2, 21, 22 S u p p or t i n g br a c ket Hin ge for op en in g
More informationS/H/MPC SERIES S/H/MPC SERIES. City Beautification. City Beautification. City Beautification. Technical Data
City beautification It s about improving the quality of life, the appearance, feeling and atmosphere of where people live, work and play. It s about introducing aesthetics in the lighting of our streets
More informationEXENC-L. - Zone 2, Zone Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components
EXENC-L - Zone 2, Zone 21-22 - Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components Resin body reinforced polyester Fixing Brackets Transparent hood
More informationFloodlight Series 6121
www.stahl.de Floodlight > For use in gas group IIC (-20 C... +C) gas group IIB + H 2 (-C... +C) > Material Enclosure in seawater resistant cast aluminium Mounting components in stainless steel > Lamp options
More informationEWE. Ex de. Cooling fins
EWE Cooling fins - Suitable for installation with ambient temperature from -50 C to +60 C - Suitable for discharge lamps of up to 150W - Suitable for loop-in/loop-out connections - Zones 1, 2, 21, 22 4
More informationIIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof
IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof Zone 1 & 2-21 & 22 ATEX IEC EC II2G/D IK 08 99 EEx d IIC T6-T5-T4-T3 T = 75 C to 135 C IP 66 0947 36 wellglass luminaire
More informationLighting Symbols 100 KM/H
LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.
More informationRLFE. Mounting bracket. Ex de. - Fast, easy installation - Suitable for discharge lamps of up to 400W - Robust and safe over time - Zones 1, 2, 21, 22
Ex de RLFE Mounting bracket - Fast, easy installation - Suitable for discharge lamps of up to 400W - Robust and safe over time - Zones 1, 2, 21, 22 Stainless steel guard Ex e terminal housing B.1 ED.2018
More informationLinear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationINDUSTRIAL LIGHTING TAURIS MODEL NUMBER F220 TAURIS 2 MODULE F221 TAURIS 3 MODULE F222 TAURIS 4 MODULE SPECIFICATIONS HOUSING : LM 6 die cast aluminium and extruded aluminium. LIGHT SOURCE : The fitting
More informationFloodlight LED Series 6125
www.stahl.de > Floodlight Zones 1, 2 and 21, 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Enclosure made of sheet steel single powder coated
More informationHTSB system System overview
HTSB system System overview Easy planning of heating circuits Simple installation on site Wide operating temperature range The BARTEC HTSB heating system covers a wide range of applications in trace heating.
More informationTank Inspection Lights Series 6122
> For halogen lamps 5 W to 100 W > Mounting options tilting hinge mounting bracket flange collar > Corrosion-resistant light metal enclosure > Connection options potted connection lead connection www.stahl.de
More informationLighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
More information7 Lighting Technology
7 Lighting Technology Compact Emergency Light Fittings C-LUX 6108 (Zones 1 & 2, 21 & 22) C-LUX 6508 (Zones 2, 22) 01908E00 Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for
More information