L634 [56.49] X UNICLASS L ambiente. more than underfloor UNDERFLOOR HEATING TRADE PRICELIST

Transcription

1 L634 [56.49] X UNICLASS L75627 ambiente more than underfloor UNDERFLOOR HEATING TRADE PRICELIST

2 003 KITCHEN / DINING 20 C 2463 W 001 LOUNGE 20 C 1381 W 006 UTILITY 18 C 611 W 005 HALL / CLOAK ROOM 18 C 1380 W GROUND FLOOR 002 FAMILY ROOM 20 C 878 W 004 STUDY 20 C 629 W Distributor 1 UFH DESIGN SERVICE ambiente SUSTAINABILITY Ambiente offers a professional UFH CAD design service as well as heat output figures and optional heat loss calculations. Having our own design team means that we can be much more flexible during the design stage and can quickly accommodate any alterations to the layout and other requirements as they are specified by the architect, builder or client. We can prioritise these changes in our system and minimise any delays. These drawings are also supplied to our clients for their own records. We also keep all our drawings in our electronic database for future reference and if clients require this information we can readily supply it. We also supply comprehensive wiring diagrams showing how the system should be wired, by your on-site electrician. AT AMBIENTE WE EMPLOY A TEAM OF HIGHLY TRAINED UNDERFLOOR HEATING TECHNICIANS TO ANSWER ANY QUERIES YOU MAY HAVE PRIOR TO AND DURING INSTALLATION. This same skilled team will also provide you with excellent after-sales support, giving you complete peace of mind for the future of your system. Ambiente is committed to providing sustainable solutions and protecting the environment. We only source our products from sustainable sources and we make sure that not only are our systems efficient in their operation, but also that they can be coupled with renewable heat sources such as solar thermal systems. As a company we are employing more and more efficient practices such as the use of up to date machinery and enviro-friendly vehicles. OUR GUARANTEE We put so much into the design and manufacture of our products and can confidently say that our industry-leading guarantees will give you complete peace of mind. LIFETIME PIPEWORK WARRANTY SCREEDED FLOOR SYSTEMS Screeded systems are the most popular and effective type of underfloor heating. Pipes are clipped or stapled onto an insulation layer then the screed is laid on top. The warm pipes effectively heat up the whole screed slab, giving even and consistent heat output. + Rapid Installation + Maximum output + Versatile pipe layout SUSPENDED FLOOR SYSTEMS Used for joisted or battened floors, we offer a range of plated solutions to suit each application. The aluminium plate either spans the joists or is fixed from underneath and supports the pipes as well as spreading heat for an even heat output. + For joisted/battened floors + No impact on floor build up + Maximum heat transfer FLOATING FLOOR SYSTEMS Floating floor systems consist of pipes laid into pre-grooved and foiled insulation boards which can be laid directly onto the floor surface below. + Can be used in existing floor constructions + Quick response time + Improves insulation value LOW PROFILE FLOOR SYSTEMS Low Profile systems are ever-increasing in popularity as more people see the benefits of underfloor heating and want to add it to their property. They can be laid directly onto any solid floor surface to provide an even heat output with minimal floor build-up. + Slim floor build up, minimum impact on floor build up + Suitable for refurbishment projects + Add UFH to existing property SPECIALIST SYSTEMS We have developed some specialist systems to cater for specific requirements such as structural floor areas, raised access floor systems and even a revolutionary wall heating solution. BESPOKE SYSTEMS Ambiente offers the unique service of manufacturing bespoke systems to cater for any unusual or demanding requirements. Our design team will be happy to assist you in your project and work with you to come up with the best system to meet your needs. Guide output : up to 100w/m 2 Guide output : up to 70w/m 2 Guide output : up to 80w/m 2 Guide output : up to 80w/m 2 2 Ambiente Systems UK 3

3 Image Image MANIFOLDS Manifolds Manifold Couplings Pre-assembled stainless steel distribution manifold with 3/4" Euro cone take-offs. (Includes fill/drain valves, pressure gauge and mounting brackets). 3/4" Coupling for 12 x 1.5mm PE-RT /4" Coupling for 17 x 2mm PE-RT Manifold 1 port Manifold 2 port Manifold 3 port /4" Coupling for 16 x 2mm PEX-AL-PEX Manifold 4 port /4" Coupling for 16 x 2mm PE-RT /4" Coupling for 15mm copper/plastic Manifold 7 port Manifold 8 port Straight connector 3/4" (pipe repair for use with relevant pipe couplings to join pipe) Manifold 9 port Manifold Accessories (supplied with manifold except where stated) Manifold 10 port Manifold 11 port Manifold 12 port Manifold 13 port Manifold 14 port Manifold bypass (not supplied with manifold) " pair of ball valves (not supplied with manifold) " pair of ball valves with temperature gauge (not supplied with manifold) " M/F elbow Flow meter replacement Actuator replacement valve Manifold blanking cap (not supplied with manifold) Pressure gauge and adaptor Auto air vent (not supplied as standard) Fill/drain valve Manifold tag Manifold flow bar Manifold return bar 1 5 Blending valve (25-60OC) Flow meter Manifold cabinets in galvanised steel with enamelled white door 355mm 4 CircoMax circulating pump 200mm 3 Isolating ball valves Recessed cabinet (540 x 630 x 90mm - up to 4 port) Recessed cabinet (740 x 630 x 90mm - up to 8 port) Recessed cabinet (890 x 630 x 90mm - up to 10 port) Recessed cabinet (1040 x 630 x 90mm - up to 12 port) Surface mounted cabinet (560 x 650 x 130mm - up to 5 port) Surface mounted cabinet (760 x 650 x 130mm - up to 9 port) Surface mounted cabinet (910 x 650 x 130mm - up to 10 port) Surface mounted cabinet (1060 x 650 x 130mm - up to 12 port) MANIFOLD FITTINGS AND ACCESSORIES Manifold 5 port Manifold 6 port 7 7 Actuator head (shown with pre-install caps) 2 8 Pressure gauge 9 Temperature gauge 5 10 High temperature protection sensor (optional) 130mm 150mm 70mm See manifold table below Recommended minimum installation clearances: 200mm between the finished floor level (FFL) and bottom of the manifold, 100mm above the manifold, 50mm to either side of the manifold and allow an extra 100mm for the connection of the primary flow/return pipework. 4 Number of ports Manifold Length (mm) Ambiente Systems UK 5

4 Image Image Pumps/Pump Assemblies (with blending valve) 12mm x 1.5mm PE-RT Pipe 12mm x 1.5mm PE-RT pipe 100 metre roll (5 layer) CircoMax manifold pumpset (Grundfos UPM3 pump) mm x 1.5mm PE-RT pipe 200 metre roll (5 layer) mm x 1.5mm PE-RT pipe 500 metre roll (5 layer) High temperature protection sensor available for CircoMax pumpset- enquire for details. 17mm x 2mm PE-RT Pipe 17mm x 2mm PE-RT pipe 120 metre roll (5 layer) PUMPS AND PUMP FITTINGS VALVES AND FITTINGS Single zone pump/blender unit (Grundfos UPS2 pump) (requires 2 no adaptors) Grundfos UPS pump (supplied as replacement pump for only) Grundfos UPM3 pump (supplied as replacement pump for only) Pump fittings Straight M-M 1/2" - 3/4" (Sold in pairs for use with single zone pump 41445) Pump gate valve 22mm Pump gate valve 28mm CircoMax Isolation Valves (Sold in pairs to isolate primary pipework before the pumpset) Straight connector 22mm x 3/4" BSP (male) Straight connector 28mm x 1" BSP (male) Zone valves and blending valves Blending valve 22mm (temperature range O C) Blending valve 28mm (temperature range O C) Motorised valve 22mm (230v) Return temperature limiter valve kit Actuator valves (for individual loop control) 2 wire actuator valve (230v), N/C, spring return (2m lead) mm x 2mm PE-RT pipe 240 metre roll (5 layer) mm x 2mm PE-RT pipe 700 metre roll (5 layer) mm x 2mm PEX-AL-PEX Pipe 16mm x 2mm PEX-AL-PEX pipe 100 metre roll (MLCP) mm x 2mm PEX-AL-PEX pipe 200 metre roll (MLCP) mm x 2mm PEX-AL-PEX pipe 500 metre roll (MLCP) Split Flex Conduit (Used to protect pipework on expansion joints) Split flex conduit for 16/17mm pipe 50 metre roll Pipe Bends (For use below a manifold to take pipes neatly into the floor) 90 O (20mm) closed form - For 12mm pipe O (25mm) closed form - For 16/17mm pipe O (16-18mm) open form Fixings Tacker clips 40mm (300 pieces) - Use with tacker gun Tacker clips 60mm (300 pieces) - Use with tacker gun Cliprail clips 45mm (200 pieces) Cliprail length for 17mm pipe (1m) Nail-in pipe clips for 16/17mm pipe (100 pieces) Nail-in pipe clips for 12mm pipe (100 pieces) Clout nails 25mm (approximately 400 pieces) Zip ties 200mm (100 pieces) Diffuser plates 1000mm x 390mm double groove aluminium spreader plate mm x 200mm double groove aluminium spreader plate PIPE FIXINGS PLATES 2 wire actuator valve (24v), N/C, spring return (2m lead) Triple-groove and other bespoke plates available on request. 6 Ambiente Systems UK 7

5 Image Image Pre-grooved and foiled EPS Insulation (grooved for 17mm pipe at 200mm centres) Dial Thermostats AmbiFloat 10 EPS x 1.2m (with returns) 25mm Ambiente standard dial thermostat (230v) AmbiFloat 10 EPS x 1.2m (with returns) 50mm Tamper proof cover for standard dial thermostat AmbiFloat 20 EPS x 0.35m (with returns) 50mm (for use between 50mm joists at 400mm centres) Ambiente night set-back thermostat (230v) (includes temperature-limiting function) BOARD SYSTEMS AND ACCESSORIES Low profile systems (grooved for 12mm pipe at 150mm centres) AmbiLowboard pre-grooved and foiled EPS x 0.6m (with returns) 18mm AmbiScreedboard SX18 straight panel (pre-grooved cement board with lap joint 1200 x 600 x 18mm) AmbiScreedboard RX18 return panel (pre-grooved cement board with lap joint 1200 x 600 x 18mm) AmbiScreedboard joint adhesive (1ltr - allow one bottle per 25m2) AmbiScreedboard screws (allow one box per 50m 2 ) AmbiPrime 77 (1L professional tiling primer) AmbiBond Adhesive SB200 (17kg - covers approx 15m 2 ) AmbiChipboard pre-grooved 22mm T+G structural chipboard 2.4m x 0.6m (with radius returns) 50m aluminium foil tape (for use with AmbiFloat/ AmbiLowboard products) Programmable Digital Thermostats Ambiente PRT/E programmable thermostat (230v) (Can be used for both wet and electric UFH) Ambiente PRT/NE programmable thermostat (12v) Slimline-RF wireless programmable thermostat Touch programmable thermostat (230v) Touch-N programmable thermostat (12v) Ambiente central touchpad controller (12v) Neostat programmable thermostat 230v (Smartphone control option with this product) Neostat programmable thermostat 12v (Smartphone control option with this product) NeoAir wireless thermostat (Smartphone control options with this product) NeoAir Stand (An alternative to fixing your NeoAir stat to the wall) THERMOSTATS AND TIMECLOCKS AmbiSolo self-adhesive panel 1.05 x 0.65m (covers 0.6m2) Castellated panels (for use with 16mm and 17mm pipe) Wifi Smart Stat (Integrated thermostat and programmer, linking directly to Wifi for smartphone control) Timeclocks/Programmers INSULATION Castellated panel plain 1.22m x 0.82m (overall height 20mm) Castellated panel with 10mm EPS100 backing 1.22m x 0.82m (overall height 30mm) Castellated panel with 30mm EPS100 backing 1.22m x 0.82m (overall height 50mm) Border edge insulation Border edge insulation (150 x 8mm) 50m TM1, 1 channel timeclock (230v) TM4-TS, 4 channel touchscreen timeclock (230v) Internet control Neohub for use with Neostat for heating control via a smartphone Border edge insulation (150 x 8mm) 50m with skirt for flowing screed Programmable Digital Thermostats and Timeclocks. We can supply alternative colour variations for these items, most are available in white, black and silver. Please call our sales team for pricing details. 8 Ambiente Systems UK 9

6 Image Remote Sensors (All sensors are compatible with and 43510) Image Tools Sensor probe for use with floor temperature sensing (3m) Tacker gun for use with 40-50mm staples Thimble sensor, white SENSORS Thimble Sensor, Aluminium Thimble sensor, stainless steel Button sensor, white Tacker gun for use with 60mm staples Pipe de-reeler for coils up to 500m TOOLS Button sensor, stainless steel Button sensor on single gang plate, white Pipe de-reeler for 700m drum Conduit for use with sensor probe (3m) Manifold spanner (double ended - 30 & 27mm) Wiring Centres UH4-4 zones wiring centre (230v) WIRING CENTRES UH8-8 zones wiring centre (230v) UH1-8 zones wiring centre (12v) UH8-RF - 8 zones wireless wiring centre (230v) RF-switch 2-zone Wireless receiver Ambiente Systems UK 11

7 Conservatory Pack (up to 15m2) Screed floor construction Kit Compact Pump Pack (up to 30m2) Screed floor construction Kit x mm UFH Pipe (41000) - 1 x mm UFH Pipe (41010) UNDERFLOOR HEATING - SCREED FLOOR CONSTRUCTION KITS - 2 x Pipe Support Bends (41050) - 2 x 17mm manifold couplings (42200) - 15 x 1m Cliprails (41450) - 1 x Cliprail clips (200pcs) (41450) - 1 x Temperature limiter valve kit (44200). Compact Pump Pack (up to 20m2) Screed floor construction Kit x mm UFH Pipe (41000) - 2 x Pipe Support Bends (41050) - 2 x 17mm manifold couplings (42200) - 1 x Single zone pump/blender unit (41444) - 2 x Straight male ½ male 3/4 fittings (42121) - 20 x 1m Cliprails (41450) - 1 x Cliprail clips (200pcs) (41450) - 1 x Standard dial thermostat (43200) - 2 x Pipe Support Bends (41050) - 2 x 17mm manifold couplings (42200) - 1 x Single zone pump/blender unit (41444) - 2 x Straight male ½ male 3/4 fittings (42121) - 30 x 1m Cliprails (41450) - 1 x Cliprail clips (200pcs) (41450) - 1 x Standard dial thermostat (43200) 2-Zone System (up to 40m2) Screed floor construction Kit008 1, x mm UFH Pipe (41010) - 4 x Pipe Support Bends (41050) - 1 x 2 Port manifold (41300) - 1 x Isolating ball valves (42050) - 4 x 17mm manifold couplings (42200) - 1 x CircoMax Pump/blender unit (41434) - 40 x 1m Cliprails (41450) - 2 x Cliprail clips (200pcs) (41450) - 2 x 230v actuator valve (43015) UNDERFLOOR HEATING - SCREED FLOOR CONSTRUCTION KITS - 1 x UH4 Wiring centre (43145) - 2 x Standard dial thermostat (43200) 12 Ambiente Systems UK 13

8 2-Zone System (up to 50m2) Screed floor construction Kit010 1, x mm UFH Pipe (41010) UNDERFLOOR HEATING - SCREED FLOOR CONSTRUCTION KITS - 1 x 120m 17mm UFH Pipe (41000) - 6 x Pipe Support Bends (41050) - 1 x 3 Port manifold (41310) - 1 x Isolating ball valves (42050) - 6 x 17mm manifold couplings (42200) - 1 x CircoMax Pump/blender unit (41434) - 50 x 1m Cliprails (41450) - 2 x Cliprail clips (200pcs) (41450) - 3 x 230v actuator valve (43015) - 1 x UH4 Wiring centre (43145) - 2 x Standard dial thermostat (43200) 2-Zone System (up to 40m2) Joisted floor construction Kit012 1, x mm UFH Pipe (41010) - 4 x Pipe Support Bends (41050) - 1 x 2 Port manifold (41300) - 1 x Isolating ball valves (42050) - 4 x 17mm manifold couplings (42200) - 1 x CircoMax Pump/blender unit (41434) - 90 x Aluminium diffuser plates (44520) - 2 x Clout nails (400pcs) (41501) - 1 x Nail-in pipe clips (41500) - 2 x 230v actuator valve (43015) - 1 x UH4 Wiring centre (43145) - 2 x Standard dial thermostat (43200) 14 Ambiente Systems UK 15

9 DELIVERY RATES FOR AMBIENTE CUSTOMERS 2016 Ambiente offers a flexible and reliable delivery service throughout the UK for both parcels and pallets. Standard service is next-day delivery, with options of pre and pre at an extra cost. We are committed to getting your goods to you on-time, every time, as we appreciate the potential implications of delays on your project. With large stocks and a focused and dedicated despatch team, we are confident we can deliver to your expectations. PALLET SERVICE England and Wales Cost Full pallet 60 Half pallet 45 Quarter pallet 40 Scotland Cost Full pallet (postcode dependent) Half pallet (postcode dependent) Quarter pallet (postcode dependent) PARCELS SERVICE UK next day delivery Cost Small Package (up to small jiffy bag) 24hr service 7.00 Standard 24hr Service Next Working Day by Noon Next Working Day by 10.30am Next Working Day by 9am Saturday AM Delivery Please note: trade discount rates do NOT apply to these delivery rates. ambiente Ambiente Heritage House, 1 Woodside Lane, Bell Bar, Hertfordshire AL9 6DE