Temporary Jobsite LED Light Fixture - 60 Watt LED - 14/3 SJT - Daisy Chain - Hook Mount

Transcription

1 Temporary Jobsite LED Light Fixture - 60 Watt LED - 14/3 SJT - Daisy Chain - Hook Mount Part #: WAL-TJL-150W-LED-CPR-E2E C Page: 1

2 Made in the USA The Larson Electronics WAL-TJL-150W-LED-CPR-E2E C Temporary Work Area Lighting LED Light is a single 60-watt temporary job site fixture that replaces 150-watt metal halide and high-pressure sodium lamps. It features high voltage surge protection, a durable stainless-steel cage and hook with daisy chaining capabilities, and produces a total of 7,200 lumens of quality illumination, ideal for any construction or work area in need of an overhead temporary light source. The WAL-TJL-150W-LED-CPR-E2E C work area light is a direct replacement for 150 watt metal halide and pressure sodium units, and consists of one LED lamp that is connected to power via a 48 foot 14/3 SJT input cable with a male plug and a 2 foot output cord with a female connector. This light is equipped with a high output 60 watt LED bulb, making it suitable for standard voltage and low voltage applications. The LED is enclosed in a bird cage style guard with a hook, both constructed of durable stainless steel. This unit can be daisy chained together with additional units and has a 10-foot input cord and 1-foot output cord. This temporary LED light is UL cul DLC4.0 listed and IP65 rated waterproof and dust proof. This unit operates on standard 50-60Hz, for easy power source connection. This LED worksite lamp produces 7,200 lumens with color temperature ranging from K and an average beam angle of 270º. The lamp housing is constructed from light weight stainless steel, and an IP65 waterproof and dustproof rating that keeps the lamp safe from moisture and dust, common contaminants at construction sites. This stainless-steel enclosure will not fade, rust or distort, making this fixture very resistant to impact and other environmental factors. The lamp includes a stainless steel hook used to hang the unit securely in overhead locations for effective worksite flood illumination. The WAL-TJL-150W-LED-CPR-E2E C LED light bulb provides an additional safety measures and time savings, given the low heat production, excellent 50,000 hour rated lifespan and 80 CRI. Since the LED bulb uses solid state technology, vibration and potential falls or intentional vandalism will not break the bulbs, unlike traditional bulbs. Additionally, this construction site lamp features a special 6000V surge protector, which keeps the lamp safe even in harsh stormy weather. A glue-irrigating internal driver is included, which realized even heat dissipation, making this lamp suitable for worksites that may experience heat buildup. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid-state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Safety within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work lamps, such as incandescent and halogen light sources, the lamp reaches high surface temperatures. These surface temperatures introduce a burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material is accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with heat sinks to properly disperse the heat. Each LED bulb is engineered to disperse and expel this heat quickly and efficiently, keeping the lamp cooler than traditional light sources. This LED work light operates at a lower surface temperature than a comparable model with traditional light source, and thus does not present a significant burn risk if an operator or bystander accidentally brushed up against an exposed lamp, and reduce the fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly increases the safety within the work environment. Click Photos to Enlarge Page: 2

3 5-15 Straight Blade Plug 15 Amp / 125V Rated L5-15 Twist Lock Plug 15 Amp / 125V Rated L6-15 Twist Lock Plug 15 Amp / 250V Rated UK BS1363 Straight Blade Plug 13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug 16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring/Plug: The WAL-TJL-150W-LED-CPR-E2E C can be daisy chained, and includes a 48' 14/3 SJTW input cord with a male plug and a 2' 14/3 SJTW output cord with a female connector. Male plug options include standard amp straight blade plug for 110V wall outlets with ground, standard amp straight blade plug for V wall outlets with ground, NEMA L amp twist lock plug for 125V twist lock outlets, NEMA L amp twist lock plug for 240V twist lock outlets, British BS amp fused 3-blade plug for United Kingdom outlets, or a two pin 11 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Female plug options for low voltage output include 5-15 striaght blade plug, L5-15 twist lock plug, and 2-pin Deustch connector. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Page: 3

4 Specifications / Additional Information WAL-TJL-150W-LED-CPR-E2E C Temporary Work Area LED Light Lamp Type: LED Weight: 27.5 Lbs Voltage: Universal VAC 50/60 Hz Total Watts: 60 watts Total Lumens: 7,200 Luminous Efficacy: 120 Lm/W Features UL cul DLC4.0 listed IP65 Waterproof & Dustproof 6000V Surge Protector High Output 60 Watt LED Lamp 150 Watt MH/HPS Replacement 50,000+ Hour LED Lamp Life Color Rendering Index: >80 Beam Angle: 270 LED Lamp Life Expectancy: 50,000+ Hours CRI: 80 Power Factor: >0.9 Color Temperature: K Size: 12.59" H x 5.9" D Wiring: 48' input & 2' output SJT 14/3 cable Special Orders- Requirements Contact us for special requirements Chip: Samsung/ Epistar 2835 Toll Free: Mounting: Stainless Steel Eyelet for Hook Mounting Intl: Warranty: 3 Years* sales@larsonelectronics.com Scroll Down to Purchase- This product does not qualify for free shipping. Part #: WAL-TJL-150W-LED-CPR-E2E C (149936) Page: 4

5 Options: WAL-TJL-150W-LED-CPR-E2E C- CORD CAP Example: WAL-TJL-150W-LED-CPR-E2E C-5.15 CORD CAP 5-15 Straight Straight L5-15 Twist -L5.15 L6-15 Twist -L Straight Straight L5-20 Twist -L5.20 L6-20 Twist -L6.20 UK BS1363 -BS1363 Intl Schuko -Schuko Pigtail -Pigtail Page: 5

6 Links (Click on the below items to view): - Hi-Res Image 1-100ft Temporary Construction String Light Page: 6