TUB ENCLOSURE 2-Door By-Pass. SHOWER DOORS Pivot Type FITS OPENING APPROX. ONE INCH LARGER THAN NOTED SIZE. 57-3/4 TALL.

Transcription

1 *s are Subject to Change without Notice.* TUB ENCLOSURE 2-Door By-Pass FITS OPENING APPROX. ONE INCH LARGER THAN NOTED SIZE. 57-3/4 TALL. OBSCURE TEMPERED SAFETY GLASS. HEAVY DUTY ALUMINUM FRAMING. COMES WITH TWO TOWEL BARS. CLASSIC E SERIES BOTTOM TRACK IS OPEN TO THE INSIDE TO ALLOW WATER TO DRAIN BACK INTO THE TUB AND TO ASSIST IN CLEANING. SHOWER DOORS Pivot Type 65-7/16 INCHES TALL SILVER SATIN ANODIZED ALUMINUM FRAME CUT ALUMINUM DOOR PULL OBSCURE TEMPERED (AQUATEX) SAFETY GLASS RIGHT OR LEFT HANDED UNIQUE DAM STRIP ELIMINATES LEAKS MAGNETIC DOOR LATCH STRIP KEEPS DOOR CLOSED CV SERIES WIDTH-28", $ Rough Opening: 27-3/4" to 29-1/2" WIDTH-30", $ Rough Opening: 29-3/4" to 31" WIDTH-32", $ Rough Opening: 30-3/4" to 32-1/2" WIDTH-34", Rough Opening: 33-1/4" to 35" $ " WIDE, $ SILVER FRAME " WIDE, $ GOLD FRAME " WIDE, SILVER FRAME $ Page 176

2 *s are Subject to Change without Notice.* SHOWER ENCLOSURE 2-Door By-Pass FITS OPENINGS APPROX. ONE INCH LARGER THAN NOTED SIZE. OBSCURE TEMPERED SAFETY GLASS. HEAVY DUTY ALUMINUM FRAMING. HAS TWO TOWEL BARS. CLASSIC E SERIES BOTTOM TRACK IS OPEN TO THE INSIDE TO ALLOW WATER TO DRAIN BACK INTO THE SHOWER AND TO ASSIST IN CLEANING & is 65-3/4 tall is 67-3/4 tall SHOWER DOORS With In-line Panel 65 INCHES TALL SILVER ALUMINUM FRAME OBSCURE TEMPERED (AQUATEX) GLASS DOOR MAY BE PLACED ON RIGHT OR LEFT SIDE OF IN- LINE PANEL MAGNETIC DOOR LATCH STRIP KEEPS DOOR CLOSED UNIQUE DAM STRIP ELIMINATES LEAKS DOOR IS 30 WIDE is 67 tall is 65-1/2 tall WIDTH-44", $ Rough Opening: 43-3/4" TO 44-5/8" WIDTH-51", Rough Opening: 49-3/4" TO 51-1/2" $ " WIDE, 67-3/4" TALL, $ SILVER FRAME " WIDE, 65-3/4" TALL, $ SILVER FRAME " WIDE, 65-3/4" TALL, SATIN FRAME $ Page 177

3 *s are Subject to Change without Notice.* MAGNETIC STRIP Shower Door Fastener This magnetic strip slides into the door frame extrusion and fascia frame extrusion. Comes in 100 ft. rolls. Overall width is ¼. Will cut to any length. Sold per foot $0.98 PIVOT BRACKET Shower Doors Pivot bracket is made of gray extruded plastic and is used on several pivot type shower doors. Brackets are 3 long x 1-1/2 wide at widest point and mounts with four screws. Requires two per door $1.99 DOOR HANDLE Shower Doors Satin finish aluminum handles are 2-13/16 long x 1-1/4 wide (handle only). Mounting holes are 2 center to center. One set of two handles (one inside one outside) per package. DRIP CHANNEL This 33 long x 1 wide extruded aluminum channel fastens to the bottom of pivot type or hinged type shower door to deflect the water away from the door opening. Has track to accept door sweep. Can be cut with a hacksaw to fit doors that are 33 wide or less. Mounts with supplied double face tape, just peel-n-stick. Satin aluminum finish $7.98 BUMPER By-Pass Shower Doors This 1 diameter x 3/16 thick bumper is made of white rubber $1.29 GUIDE By-Pass Shower Doors Nylon guides are 3-1/8 long and fit in bottom of door and glides in bottom track to hold doors in place. Requires two guides per door. d individually $ $3.98 SCREWS These #8 philips pan head screws are made of stainless steel which will not rust or tarnish. Silver color. Sold five per package /2" LONG $ /2" LONG $2.19 TOWEL BAR This silver towel bar is made of highly polished extruded aluminum with chromed cast metal ends. The bar itself is 29 long and when the ends are attached it will fit a 33 wide door. The bar may be cut with a hacksaw to fit narrower doors. The ends attach to a shower door with supplied stainless steel screws. The towel bar is 13/16 wide and 5/16 thick. The towel bar is open all along the bottom to prevent water from being trapped inside the bar. Outside of the bar protrudes 1-1/2 from face of door $24.00 Page 178

4 *s are Subject to Change without Notice.* FILLER JAMB SILVER MADE OF ALUMINUM Latches LATCH FOR SHOWER DOORS Used to fill in where there are off-sets where end frames meet the wall. Filler is 68-1/16" tall, 1-1/8" wide (actual width of fill) and 1-5/8" deep. Fits Classic, Classic E and Crystaline series tub/shower enclosures. Same heavy aluminum materials as the enclosure kits are made of. d two (2) per set $34.49 BOTTOM SILL TRACK This silver aluminum bottom track is open to the tub/shower side for water drainage and for ease of cleaning. Track is 60" long. For use with glass shower doors. Spring loaded nylon catch with heavy duty metal housing. 1-1/4" long x3/4" wide, 15/16" C to C mounting holes AS DESCRIBED $ ALL-PLASTIC LATCH $3.98 SEAL Shower Door Bottom Made of a soft gray rubber, 1-1/4" wide overall x 36" long x 5/32" thick $29.95 Pivot Bushing PIVOT BUSHING Shower Doors This nylon bushing is used on some manufacturers pivot type shower doors. Requires one at top and one at bottom of door. Total overall length is 1-3/16", overall height is 1/2" including raised tip on top. Hole diameter is 7/32". Made of white nylon $ $2.89 SEAL Shower Door Bottom Made of a soft gray rubber. Lip that slides into metal track is 9/32" wide. Sold by the foot /16" WIDE SWEEP $ /8" WIDE SWEEP $0.59 Pivot Pin Set PIVOT PIN SET Shower Door Pivot pin is used on pivot type shower doors where door pivots on stationary arm. Comes with washer and nut. Overall length of pin is 7/8" by 3/16" diameter. Pin, nut and washer is made of aluminum or stainless steel. One per package $8.99 Page 179

5 *s are Subject to Change without Notice.* SHOWER DOOR ROLLERS Flat Ball bearing construction 1/4" wide nylon wheel 7/16" dia. hub extends 1/8" from back, center hole is 8-32 threads /4" DIA. $ /8" DIA. $1.69 SHOWER DOOR ROLLERS Oval Ball bearing construction 1/4" wide nylon wheel 7/16" dia. hub extends 1/8" from back, center hole is 8-32 threads /4" DIA. $ /8" DIA. $1.69 SHOWER DOOR ROLLER WITH BRACKET 3/4" dia. ball bearing nylon wheel. Bracket has height adjustment up to 1/4" bracket mounting holes 2" on center PER CARD $2.99 HAND-HELD SHOWER MASSAGE 2.5 GPM at 80 PSI. 3-position spray. 3-1/2" shower face. 59" chromed metal hose. Mounts directly to shower arm with supplied bracket WHITE $ CHROME $17.98 BRACKET FOR HAND-HELD SHOWER Has 1/2" F.P.T. for shower arm and 1/2 M.P.T. for attaching flexible hose. Made of Hi- Impact plastic WHITE $ CHROME $4.95 FLEXIBLE HOSE FOR HAND-HELD SHOWER Chromed metal. 59" long with 1/2" F.P.T. each end $9.98 SHOWER SPLASH GUARDS Keeps water inside tub and shower curtain. Stops wet floors while showering. Made of white high impact plastic. Self adhesive, simply peel off protective cover and stick in place. 2 per pkg. Dimensions: 7 in. x 9 in $2.98 SHOWER ROD FLANGE KIT Fits 1" O.D. shower rod, has two flanges with 4 #6 x 1-1/4" stainless steel screws. The white flangeset has stainless steel screws with powder painted white heads WHITE $ CHROME $ FOOT SHOWER ROD This 1" dia. steel shower rod is coated with a white vinyl protective covering to help maintain its good looks for years to come. Does not come with mounting flanges $5.98 JIFFY FLANGE For 1 Diameter Shower Rods Chrome Plated ABS $1.60 Page 180

6 *s are Subject to Change without Notice.* FACE PLATE WITH TRIP LEVER Made of chrome plated zinc with flange depth of 1/2". Does not come with screws $3.49 FACE PLATES Bathtub Drains Chrome plated zinc with flange depth of 1/2". Comes with chrome plated brass screw(s) ONE HOLE $ TWO HOLES $2.49 For Face Plates SCREWS Face plate These chrome plated brass screws are 1-1/2" long, 1/4"x20 threads per inch with oval countersunk head. Two (2) per package $1.19 High Impact PVC SHOWER HEADS of HIGH IMPACT PVC Has two inch diameter face, adjusts from a fine mist to a heavy spray. White PVC /2" F.P.T. INLET $ /8" F.P.T. INLET $4.79 Chromed Metal Body SHOWER HEAD Chromed Metal Body With Water Saver Adapter Fully adjustable 2" dia. face. Canopy adjusting handle. Maximum flow of 2.75 g.p.m. at 80 psi. Has 1/2" F.P.T. inlet $9.79 Massage 3 Position Spray MASSAGE SHOWER HEAD 3-Position Spray Massage, spray or a combination of both. Chrome plated ABS. Has 1/2" F.P.T. inlet. 2.5 g.p.m. flow rate $8.98 Chrome Plated Brass SHOWER HEAD Chrome Plated Brass Heavy chrome plated brass body and ball joint. Has 1/2" female pipe threads. The 3" diameter non-adjustable chrome plated face gives full coverage of fine to medium spray, depending on water pressure. 2.5 gallon per minute with water restrictor in place $14.98 W/ Water Saver Adapter SHOWER HEAD With Water Saver Adapter Fully adjustable 2" dia. face. Non-corrosive chrome plated ABS. Maximum flow rate of 2.75 g.p.m. at 80 psi. Has 1/2" F.P.T. inlet $1.98 Page 181

7 *s are Subject to Change without Notice.* Chromed Metal Flange SHOWER ARM Chromed Metal Flange Has Set Screw These chrome plated brass shower arms have 1/2" M.P.T. on both ends " LONG $ " LONG $9.79 Chromed Plastic SHOWER ARM of CHROMED PLASTIC $2.49 Flange CHROMED PLASTIC FLANGE (NOT $2.17 SHOWN) CHROMED PLASTIC SHOWER ARM & FLANGE IN BLISTER PACK $6.98 "S" Shaped SHOWER ARM S SHAPED Heavy duty chrome plated brass. 1/2" M.P.T. both ends. Raises shower head height approximately 8 inches $13.98 THINWALL SHOWER STALL ELBOW Used to install shower arm on thin-walls. Water hook-up is 1/2" copper sweat or 1/2" M.P.T. Other end threaded for 1/2" M.P.T. shower arm. Made of brass $5.49 Page 182

8 *s are Subject to Change without Notice.* 5-Piece, Tile Look TUB WALL KITS by Better Bath These five-piece tub wall kits are made of durable and easy to clean ABS and has the look of ceramic tile. All panels are 57-3/8 inches tall. Two corner caddies with three shelves each are supplied with each wall kit. Wall kits are designed to be installed in a manner that will accommodate several tub sizes. Panel borders do not require any type of tub molding. Simply caulk around the entire border of the wall panels and around the borders of the corner caddies. No wall anchors required. Installation requires two 11oz. tubes of bonding adhesive and one 11.2 oz. tube of tub & tile caulking, sold separately. 5-year limited manufacturer s product warranty WHITE, 27" x 54" to 30" x 60" $ WHITE, 40" x 53" to 46" x 60" $ ALMOND, 27" x 54" to 30" x 60" $ ALMOND, 40" x 54" to 46" x 60" $ Note: These wall kits do not match the color of fiberglass tubs. ANCHORS FOR TUB & SHOWER WALL KITS /4" DIA. x 1" LONG, PKG/10 $ /4" DIA. x 1" LONG, PKG/10 $2.49 NOTE: We stock two brands of adhesive to secure wall kits and both brands perform equally well with all our wall kits ADHESIVE, 10.3 OZ. TUBE (BOSS $5.98 BRAND) ADHESIVE, 11 OZ. TUBE (MAX BOND II) $5.98 FLANGE LOCK (Stainless steel flange designed to fasten the nailing flange of tubs and shower pans to studs) $0.27 SHOWER WALL KITS by Better Bath These three-piece vacuum formed ABS shower wall kits have the look of ceramic tile and gleams with high lustre finish that will not peel, chip, or spider web. Has a molded-in soap dish and needs no trim molding, simply caulk around the entire wall kit. Corners are watertight and requires no exposed caulking in corner seams. Installation requires two 11 oz. tubes of bonding adhesive and one 11.2 oz. of tub & tile caulking, sold separately. Panels are 68 inches tall. 5-year limited manufacturers product warranty BB ALMOND, 32" x 32" KIT $ BB ALMOND, 36" x 36" KIT $ BB WHITE, 32" x 32" KIT $ BB WHITE, 36" x 36" KIT $ Note: These wall kits do not match the color of fiberglass pans. ABS, Heavy Duty SHOWER PANS by Better Bath These shower pans are made of heavier gauge ABS than most other shower pans on the market. The 3-1/4" drain opening is in the center of the pan. Height is 5-3/4" up to bottom of 1" nailing flange. 5-year limited manufacturers product warranty BB ALMOND, 32" x 32" PAN $ BB WHITE, 32" x 32" PAN $ Note: For information or to order please call 1-(800) Page 183

9 *s are Subject to Change without Notice.* 5-Piece, Smooth Walls 3-Piece, 4" Square Tile Pattern SECTIONAL TUB WALL KITS by LYONS INDUSTRIES These five-piece sectional high-gloss finish tub wall kits come with six (6) molded-in shelves. Made of heavy duty (3/32" thick) smooth surface high-impact thermoplastic that will not fade, peel, chip or spider web. The adjustability feature allows one kit to fit two or more tub sizes which reduces inventory costs. Installation requires two 10.3 ounce tubes of bonding adhesive and one 10.3 ounce tube of tub & tile caulk, sold separately. Possibly the best tub wall kit on the market today at any price. Panels are fifty-eight (58) inches tall. One (1) year manufacturers warranty against defects in material and workmanship WHITE KITS, 27" x 54" to 32" x 61" $ WHITE KITS, 40" x 54" to 48" x 61" $ BONE KITS, 27" x 54" to 32" x 61" $ BONE KITS,40" x 54" to 48" x 61" $ Note: When necessary to cut the back or end panels, simply score with a razor knife, then break by bending. Tub Wall Adhesive Mutli-Purpose Adhesive NOTE: We stock two brands of adhesive to secure wall kits and both brands perform equally well with all our wall kits ADHESIVE, 10.3 OZ. TUBE (BOSS $5.98 BRAND) ADHESIVE, 10.6 OZ. TUBE (MAX BOND II) $5.98 SECTIONAL TUB WALL KITS by DUO-FORM PLASTICS These tile-look 3-piece tub wall kits are made of textured finished ABS. The 4 square tile pattern is molded into each panel. A 1-1/2 wide raised border on top, bottom and sides eliminates the need for any type of finish molding. An 8 x 9 molded-in soap dish is located 15-1/2 up from the bottom in center of the back panel. The back panel slides into a 3/4 deep V shaped channel that is molded into each end panel. All panels are 57-1/2 tall. Installation requires two 10.1 ounce tubes of bonding adhesive and one 10.1 ounce tube of tub and tile caulk sold separately. Kit fits 54 x 27 tubs. One (1) year limited manufacturers warranty against defects in material and workmanship WHITE $ BONE $ Fiberglass FIBERGLASS SHOWER PANS by LASCO Has a smooth high-gloss Lascoat finish with 1-3/4" high nailing flange on three sides. Molded-in non-skid bottom. Comes with a brass drain with a stainless steel screen. Drain outlet fits 2" abs or pvc dwv pipe. Height is six (6) inches up to bottom of 1-3/4" nailing flange. Drain is located in the center of the pan BONE, 32" x 32" PAN $ BONE, 36" x 36" PAN $ WHITE, 32" x 32" PAN $ WHITE, 36" x 36" PAN $ Page 184

10 *s are Subject to Change without Notice.* ABS, Heavy Guage ABS, Heavy Guage ABS TUBS by Better Bath Many ABS tub manufacturers experience problems with their tubs cracking after a period of time in use. This is mainly due to materials being too thin and/or improper bottom support allowing the thin material to flex excessively. We have chosen to stock Better Bath s heavy duty tubs that are thicker than most tubs on the market and reinforced in the drain area to prevent drain area cracking. Support base is made of injected molded foam (not cut block foam) for twice the support strength. Apron is molded onto tub and is not removable. Tubs do not have overflow capabilities. Drain opening is two (2") inches in diameter. These tubs have a five (5) year manufacturers warranty against defects in material and workmanship. 27" Deep x 54" Wide x 15-7/16" High, Plus a 1" Lip BB ALMOND, Left Hand Drain $ BB WHITE, Left Hand Drain $ BB ALMOND, Right Hand Drain $ BB WHITE, Right Hand Drain $ ABS GARDEN TUBS by Better Bath Molded of tough heavy duty ABS with a non-skid recessed step. All garden tubs have a center drain of standard 2" diameter. We have chosen to stock Better Bath s heavy duty tubs that are guaranteed against cracking and chipping. Apron is molded onto tub and is not removable. Four support legs are supplied for supporting the tub deck just behind the apron, two legs under the step and one leg under each corner. Five (5) year manufacturers warranty against defects in material and workmanship BB ALMOND, 54"x40"x16-5/16"+1" Lip $ BB ALMOND, 60"x40"x16-5/16"+1" Lip $ BB WHITE, 54"x40"x16-5/16" + 1" Lip $ BB WHITE, 60"x40"x16-5/16" + 1" Lip $ Page 185

11 *s are Subject to Change without Notice.* Fiberglass Fiberglass FIBERGLASS TUBS by Aquatic Industries These double layered fiberglass reinforced Lascoat (gelcoat) surfaced fiberglass tubs are long lasting with easy-to-clean highgloss finish. Has ample tub to floor clearance for above floor plumbing. Apron is a part of, and not detachable from tub. Has standard 2-1/4"O.D.drain opening without overflow capabilities. Has slip resistant textured bottom. Warranted by manufacturer for five (5) years against defects in material and workmanship. 54" WIDE x 27" DEEP x 15" HIGH, PLUS A 1" LIP BONE, 27" X 54" Left Hand Drain $ WHITE, 27" X 54" Left Hand Drain $ BONE, 27" X 54" Right Hand Drain $ WHITE, 27" X 54" Right Hand Drain $ FIBERGLASS GARDEN TUBS by Clarion Bathware The extra depth in bowl size combined with its sleek contemporary design makes these garden tubs a practical, but classical part of your bath decor. Their rugged design will support weights in excess of 350 pounds. Tub is protected by a layer of sanitary grade polyester gel coat. These tubs have a 2-1/4 drain located in the rear center. Clarion product is warranted for six (6) years against defects in materials and workmanship. Note: 60" x 41" garden tub does not have a step BONE, 54" x 42" x 23-3/4" + 1" lip $ BONE, 60" x 42" x 26-3/4" + 1" lip $ BONE, 60" x 48" x 23-3/4" + 1" lip $ WHITE, 54" x 42" x 23-3/4" + 1" lip $ WHITE, 60" x 42" x 26-3/4" + 1" lip $ WHITE, 60" x 48" x 23-3/4" + 1" lip $ Whirlpool System WHIRLPOOL SYSTEM Whirlpool systems are for Clarion tubs only and are not sold separately. Must order when tub is ordered. Whirlpools fit any tub that Clarion builds. Whirlpool trim color matches the color of tub. Chrome or brass trim is considerably more. All center drain tubs will have whirlpool pump mounted standard on left hand side of tub. Left/right hand drain tubs will have whirlpool pump mounted on opposite end from drain JET WHIRLPOOL SYSTEM $ JET WHIRLPOOL SYSTEM $ Page 186

12 *s are Subject to Change without Notice.* TOE-TOUCH DRAIN Made of chrome plated zinc. Fits all bath tubs with 1-3/4 to 2 drains, has adjustable, replaceable spring loaded cartridge with 5/16 threads for coarse threaded (11.5 tpi) body and 3/8 threads for fine thread (16 tpi) body, Simply push to c lose, push to open. Comes with drain-washer and nut COARSE THREAD (11.5 TPI) $ FINE THREAD (16 TPI) $9.98 SHOWER STALL DRAIN Stainless steel body and grid-strainer. Fits 3-1/2"to 4" openings. 1-1/2" direct connect shank. Has 1-1/2 plated zinc nut $ PIECE FIBERGLASS TUB / SHOWER CLARION BRAND 54" LONG x 28-1/2" DEEP x 75-1/2" HIGH Drain is in center back. 50-1/2" inside between end walls. 75-1/2" overall height. 56-1/2" from top edge of tub to top of walls. Has a soap dish on each side in rear corner which gives the option of right hand or left hand faucet placement. Center back drain opening is 2"diameter. Accommodates above floor plumbing. Warranted by manufacturer for six (6) years against defects in material and workmanship. Note: Cannot get shower doors to fit these units due to the 56-1/2" height above the top of the tub WHITE $ BONE $ Page 187

13 *s are Subject to Change without Notice.* SHOWER STALL DRAIN This no-caulk type drain has stainless steel snap-in grid, fits 3"dia. opening and has 2" outlet with neoprene compression gasket. Comes with locking wrench ABS $ PVC $ BRASS $15.98 WASTE and OVERFLOW Has trip lever drain, made of 1-1/2" ABS plastic with chrome trim, fits all popular tubs that are drilled for overflow. 3-PIECE FIBERGLASS SHOWERS CLARION BRAND /2" ABS $ " LONG x 28" DEEP x 75.5" HIGH 3-piece fiberglass showers feature built-in shelves on both back corners which allows for either right or left faucet placement. This is a perfect replacement for 54 x 27 tubs. Center drain opening is 3-3/8 diameter. 50-3/4 wide inside dimensions. May use our by-pass shower doors number (Silver) or (Satin). Please note that the walls separate vertically in the center-back. Unit also separates horizontally 21 up from the bottom. From floor to top of front threshold is 8-3/8 inches. Accommodates above floor plumbing. Warranted by manufacturer for six (6) years against defects in material and workmanship C WHITE $ C BONE $ Page 188

14 *s are Subject to Change without Notice.* Fiberglass, 2 Piece, 32x33 SHOWER UNIT 2-Piece Fiberglass Clarion Brand This 2-piece smooth-wall fiberglass shower unit has a soap ledge molded in each inside corner. Has 3-3/8" diameter center drain location. Has slip resistant textured floor. Not designed for above floor plumbing. Unit is 32" wide x 33" deep x 74" tall. Has a 1" wide nailing flange. Door opening is 29-1/2" wide x 67 high. Warranted by manufacturer for 6-years against defects in material and workmanship " x 33", WHITE $ " x 33", BONE $ SHOWER UNIT 2-Piece Fiberglass With Seat Clarion Brand This 2-piece smooth-wall fiberglass shower unit has a soap ledge molded in the back wall near each inside corner. Has an 18" long acrylic towel bar on back wall. Slip resistant textured floor. All units have a 3-3/8" diameter center drain. Molded-in seat is on opposite side from valve wall. Not designed for above floor plumbing. Dimensions: 47-3/4" Wide x 36" Deep x 78-1/4" High. Door opening is 43-3/4" wide x 69-1/2 high.. 6-year manufacturers warranty against defects in material and workmanship LEFT HAND SEAT, WHITE $ RIGHT HAND SEAT, WHITE $ LEFT HAND SEAT, BONE $ RIGHT HAND SEAT, BONE $ Page 189

15 *s are Subject to Change without Notice.* 3-Piece Fiberglass SHOWER UNIT 3-Piece Fiberglass Clarion Brand This 3-piece smooth-wall fiberglass shower unit has two molded-in seats and two molded-in shelves. Has a 3-3/8 diameter center drain. Has wood reinforced slip resistant textured floor. Unit is 48 wide x 36 deep x 78 tall. Door opening is 44-1/2 wide x 69-1/2 high. Distance from floor to where bottom section separates from the top section is 26-1/2. The two top pieces separate in center back. The distance from floor to top of threshold for shower basin is 7. Has a 1 nailing flange around entire perimeter of unit. Not designed for above floor plumbing. Warranted by manufacturer for 6-years against defects in materials and workmanship WHITE $ ISLAND TUB Heavy Plastic by Better Bath This island tub is made of heavy ABS (Better Bath makes one out of thinner materials but we elected to stock their thicker, heavier product). Measurements are 59-1/2 long x 42 wide (measurements taken at outer top rim) by 18-5/16 high (measurements taken from floor to underside of outer top rim). Has a 2 diameter end drain. Offered in white only. Warranted by manufacturer for 5-years against defects in materials and workmanship " LONG x 42" WIDE, WHITE $ TOE-TOUCH DRAIN Made of chrome plated zinc. Fits all bath tubs with 1-3/4 to 2 drains, has adjustable, replaceable spring loaded cartridge with 5/16 threads for coarse threaded (11.5 tpi) body and 3/8 threads for fine thread (16 tpi) body, Simply push to c lose, push to open. Comes with drain-washer and nut COARSE THREAD (11.5 TPI) $ FINE THREAD (16 TPI) $9.98 Page 190

16 *s are Subject to Change without Notice.* WASTE and OVERFLOW Has trip lever drain, made of 1-1/2" ABS plastic with chrome trim, fits all popular tubs that are drilled for overflow. Wall Bracket TOILET PAPER HOLDER CHROMED PLATED $ /2" ABS $15.98 No-Caulk Type SHOWER STALL DRAIN This no-caulk type drain has stainless steel snap-in grid, fits 3"dia. opening and has 2" outlet with neoprene compression gasket. Comes with locking wrench ABS $ PVC $ BRASS $15.98 TOWEL HOLDER WITH LUCITE RING CHROMED PLATED $3.98 Recessed RECESSED TOILET PAPER HOLDER Flat Top SHOWER STALL DRAIN Stainless steel body and grid-strainer. Fits 3-1/2"to 4" openings. 1-1/2" direct connect shank. Has 1-1/2 plated zinc nut CHROMED PLATED $11.98 TOILET PAPER ROLLER $ CHROMED PLATED $0.98 TOOTH BRUSH & TUMBLER HOLDER CHROMED PLATED $3.89 SOAP DISH SQUARE TUBE TOWEL BARS " LONG - CHROMED PLATED $ " LONG - CHROMED PLATED $ CHROMED PLATED $3.89 Page 191

17 *s are Subject to Change without Notice.* KITCHEN SINK Stainless Steel Self-rimming 33" x 17". No ledge. Bowl size 13-1/2" x 14" x 6" deep. Comes with sink rim clamps " x 17" x 6" DEEP $ KITCHEN SINKS Cast Acrylic High Gloss Finish 9" Deep Bowls 33"x 19" Self-rimming Stain resistant, heat resistant up to 400 deg F, no unsightly chipping, peeling or fading. Easy maintenance finish. 4-hole design on 8" centers. Limited lifetime warranty WHITE $ BISCUIT $ BLACK $ KITCHEN SINKS Premium Stainless Steel Self-rimming, 4-hole with ledge. Bowl size is 14 x 14 except for which is 14 x 15-3/4. Comes with sink rim clamps. These satin finish sinks do not show future scratch marks like a highly polished finish does. 15 year limited warranty "x19"x6" DEEP 22 GAUGE $ "x19"x7" DEEP 22 GAUGE $ "x19"x8" DEEP 20 GAUGE $ "x22"x8" DEEP 20 GAUGE $ KITCHEN SINK Cast Acrylic 33 x 19 Self-rimming High Gloss Finish 7-1/4 Deep Bowls Stain resistant and heat resistant up to 400 degrees F., no unsightly chipping, peeling or fading. Has a sprayed-on layer of fiberglass on the bottom side of sink to strengthen the acrylic and to help deaden sound. Has a glossy easy maintenance finish. Has four faucet hole openings that are 8 on centers. Right bowl is 16-1/4 x 14 and left bowl is 11-1/4 x 14. Both bowls are 7-1/4 deep. Has standard 3-1/2 diameter drain openings. Mounting clamps come standard with all sinks. Lifetime limited warranty against defects in materials and workmanship. White only WHITE $59.00 Page 192

18 *s are Subject to Change without Notice.* PVC, 17" x 20" Oval LAVATORY SINKS PVC KITCHEN SINKS Cast Acrylic High Gloss Finish 10" Deep Bowls 33" x 22" Self-rimming Stain resistant, heat resistant up to 400 deg F, no unsightly chipping, peeling or fading. Easy maintenance finish. 4-hole design on 8" centers. Limited lifetime warranty WHITE $ BONE $ Made of high impact PVC. 17" x 20" oval. Does not have overflow provisions. Faucet holes are on 4" centers WHITE $ BONE $21.98 LAVATORY SINKS PVC Made of high impact PVC plastic. 16 inches front to back x 19-7/8 inches wide. Has a 6-1/2 inch deep bowl. Does not have overflow provisions. Faucet hole are on 4" center. Has soap dish WHITE $ BONE $19.98 Vitreous China LAVATORY SINKS Vitreous China Vitreous china. 17" x 20" oval. Has overflow provisions. Faucet holes are on 4" centers WHITE $ BONE $41.98 ABS LAVATORY SINKS ABS Self-rimming oblong ABS sink is 17-1/2 front to back in the center, 14-1/2 front to back at each end. 20 wide in center and 17-1/2 wide at front and back of sink. Has soap dish each side of faucet. Faucet holes are 4 on centers. Does not have overflow provisions. Bowl is 16-3/4 wide x 11-3/4 front to back x 6-1/2 deep. Has 1-1/2 diameter drain opening. Comes with sink rim clamps WHITE $ BONE $21.98 Page 193

19 *s are Subject to Change without Notice.* Vitreous China LAVATORY SINKS Vitreous China Made Of Rubber STOPPERS Made Of Rubber Traditional style self-rimming rectangular fluted-rim lavatory sink is made of vitreous china. Sink is 23 wide x 18 front to back with 8-1/2 deep bowl. Has overflow provisions and a 1-1/2 diameter drain opening. Faucet mounting holes are 4 on center. High gloss finish makes it easy to maintain. 5-year limited warranty against defects in materials and workmanship WHITE $ IVORY/BONE $74.98 This is the only reasonably priced china sink on the market today that will replace the oblong plastic sinks that come in some manufactured homes. SINK MOUNTING CLIPS These white rubber stoppers have a stainless steel disk molded into the body of the rubber with a shaft extending up through the stopper with a stainless steel ring. The disk prevents the ring and post from pulling of the stopper /8" to 1-1/4" Lavatory drains $ /8" to 1-1/2" Lavatory drains $ /8" to 1-3/4" Tub drains $0.98 Fits All FIT-ALL STOPPER Fits all tub & sink drains 1-1/2 to 2". Rubber stopper has a 15" beaded chain $1.49 This sink mounting clip is designed to be used on sinks that have a U track built into them. The special designed head of the screw fits into the upside down U track and the spring-metal clip catches under the counter top. d per each $0.59 SINK MOUNTING CLIPS This all aluminum adjustable sink mounting clip is designed for use with many different counter top thicknesses. The arm that the adjustable clip slides on is 2-1/4 long. d per each $1.49 Chromed Plastic STOPPER FOR LAVATORY SINK CHROMED PLASTIC Top is 1-11/32" in diameter. Overall length is 1-7/8" $2.09 Page 194

20 *s are Subject to Change without Notice.* LAVATORY P.O. & C.O. PLUGS CHROMED Brass Body One piece chromed brass plugs have a white rubber stopper attached to a chromed beaded chain. Unlike the P.O. plug the C.O. plug does not have overflow capabilities. Overall length is 5 inches. 1-1/4 diameter tube C.O. PLUG $ P.O. PLUG $6.49 Chromed Trim, ABS Body LAVATORY POP-UP CHROME TRIM ABS BODY No Overflow One piece chrome trim ABS body with-out overflow capabilities. Comes complete with linkage. Overall length is 8-3/4 inches. 1-1/4 diameter tube Chrome Trim ABS Body $8.69 C.O. PLUGS ABS BODY No Overflow One piece ABS C.O. plug with pull-up stopper made from same color ABS with o-ring seal. Overall length is 5 inches. 1-1/4 diameter tube WHITE TRIM $ BONE TRIM $2.98 Brass Trim, ABS Body LAVATORY POP-UP BRASS TRIM ABS BODY No Overflow One piece ABS body with polished brass trim. Does not have overflow capabilities. Comes complete with linkage. Overall length is 8-3/4 inches. 1-1/4 diameter tube Brass Trim ABS Body $8.69 Chromed Brass Body LAVATORY POP-UP CHROMED BRASS BODY With overflow One piece chromed brass body with overflow capabilities. Comes complete with linkage. Overall length is 8 inches. 1-1/4 diameter tube Chromed Brass Body $13.98 Page 195

21 *s are Subject to Change without Notice.* Round Front Bowl COMMODES By BRIGGS Round Front Bowl High Gloss Vitreous China 12" Rough-in 1.6 Gal. Per Flush 5-Yr. Limited Warranty BISCUIT, TANK/LID $ BISCUIT, BOWL $ *BONE, TANK/LID $ *BONE, BOWL $ WHITE, TANK/LID $ WHITE, BOWL $47.00 * Bone Color is Colceramica Brand Elongated Bowl COMMODES By BRIGGS Elongated Bowl High Gloss Vitreous China 12" Rough-in 1.6 Gal. Per Flush 5-Yr. Limited Warranty WHITE, TANK/LID $ WHITE, BOWL $ BISCUIT, TANK/LID $ BISCUIT, BOWL $ *BONE, TANK/LID $ *BONE, BOWL $59.00 Handicap, Elongated Bowls HANDICAP COMMODES By BRIGGS Elongated Bowl High Gloss Vitreous China 18" High Elongated 12" Rough-in 1.6 Gal. Per Flush 5-Yr. Limited Warranty A.D.A. Compliant WHITE, TANK/LID $ WHITE, BOWL $ BISCUIT, TANK/LID $ BISCUIT, BOWL $ TOILET SEATS for Rounded bowls Closed Front Enameled Wood CORROSION FREE HINGES BONE $ WHITE $ BISCUIT $ CH WHITE $19.98 TOILET SEATS For Elongated Bowls Closed Front Enameled Wood Corrosion Free Hinges WHITE $ BISCUIT $ BONE $16.95 * Bone Color is Colceramica Brand Page 196

22 *s are Subject to Change without Notice.* Handicap, Elongated Bowls HANDICAP COMMODES By WESTERN POTTERY One of the Best Flushing Commodes in America Elongated Bowl High Gloss Vitreous China 17-1/4 Bowl Rim Height Vortex-Jet Flush Action Fully Glazed Trapway Has 3 Dia. Flush Valve 12 Rough-In 1.6 Gal. Per Flush A.D.A Compliant Larger Footprint than most Bowls, Covers Old Bowl Marks Fluidmaster Style Fill Valve Seat Not Included in 5-Yr. Limited Warranty WHITE, TANK/LID $ WHITE, BOWL $ IVORY/BONE, TANK/LID $ IVORY/BONE, BOWL $ HANDICAP COMMODES By WESTERN POTTERY Bolina Series Round Front Bowl High Gloss Vitreous China 16 Bowl Rim Height Vortex-Jet Flush Action Fully Glazed Trapway Has 3 Dia. Flush Valve 12 Rough-In 1.6 Gal. Per Flush A.D.A Compliant Fluidmaster Style Fill Valve Plastic Seat Included in 5-Yr. Limited Warranty WHITE, COMPLETE SETUP $ Page 197

23 *s are Subject to Change without Notice.* EZ-Flow FILL VALVE by EZ-FLOW Fillpro FILL VALVE by FILLPRO This fill valve adjusts from 8 to 13 to fit most tank heights. Its anti-siphon design prevents backflow and contamination of drinking water. Has easy water level adjustment. Made of durable materials to resist chemicals and bowl cleaners. Has a five year quality guarantee $7.98 Fluidmaster FILL VALVE by FLUIDMASTER Anti-siphon design prevents contamination of drinking water supply, meets all plumbing codes, adjustable water level control, height adjustment from 9" to 14" to fit most tanks. Corrosion resistant materials withstand harsh water and constant use $9.95 REPAIR SEAL FITS FLUIDMASTER 100, 200, 200A & 400A VALVES $1.49 Hoov-R-Line FILL VALVE by HOOV-R-LINE Code approved, special diverter system controls the tank rim flush rates required in low-silhouette commodes. Comes complete except for float ball /2"HEIGHT $ " HEIGHT $ " HEIGHT $10.55 Will not rust or corrode, fits most standard commode tanks, extremely quiet operation $11.98 Standard Type FLUSH VALVE Plastic Non-corrosive Complete with flapper tank ball, chain, nut & washer. 1" dia. overflow tube $3.49 Plastic, Non-Corrosive FLUSH VALVE Plastic Non-corrosive This 3" flush valve comes complete with flapper, stainless steel chain, nut and rubber washer. Fits most tanks with 3" opening such as Toto and Western brand commodes. Stocked with two different heights of overflow tubes " OVERFLOW TUBE $ " OVERFLOW TUBE $21.98 Eljer Touch-Flush FLUSH VALVE ASSEMBLY FOR ELJER TOUCH-FLUSH UNITS KIT INCLUDES TANK LEVER, GUIDE, CHAIN & TANK BALL $6.98 Page 198

24 *s are Subject to Change without Notice.* Mansfield Watersaver MANSFIELD WATERSAVER FLUSH VALVE ASSEMBLY Will not rust or corrode, made of high impact plastic, seats and seals every time. We Stock Straight Type Only $9.98 Page 199

25 *s are Subject to Change without Notice.* American Standard FLUSH VALVE ASSEMBLY FOR AMERICAN STANDARD NEW STYLE ASSEMBLY $9.98 WASHER Flush Valve This rubber washer is designed to seal flush valve spuds to toilet tank $0.49 WASHER Ballcock Shank This rubber washer seal the ballcock shank to the toilet tank $0.29 Mansfield FLUSH VALVE DISC MANSFIELD For Mansfield #210 Flush Valves. 3-3/8" O.D. x 2-1/8" I.D. 1/8" thick rubber $1.49 FLUSH VALVE SEAL MANSFIELD For Mansfield #208 and #209 Flush Valves $2.98 Jumbo Size RUBBER FLAPPER Jumbo Size Rubber flapper is made of blue rubber and fits several 3 diameter flush valves such as in some Toto brand and all Western brand commode tanks $11.98 REPLACEMENT DISCS FOR AMERICAN STANDARD Comes with an adapter that converts it from a snap-on to a screw-on type $1.49 Flapper, Black Rubber RUBBER FLAPPER Fits most standard flush valves. Made of soft rubber. Has chain and guide $1.98 RUBBER FLAPPER Fits most standard flush valves. Made of soft rubber. Main body is much thicker than # shown above $3.98 FLUSHER FIXER KIT This easy, permanent cure for toilets that won t shut off. Fits most flush valves $8.98 Rubber Flapper, Kohler RUBBER FLAPPER FOR KOHLER $2.98 Page 200

26 *s are Subject to Change without Notice.* Tank Ball, Tripple Seal TRIPLE SEAL TANK BALL Seals Leaks Three Ways $1.98 Eljer Touch-Flush TANK BALL FITS ELJER TOUCH FLUSH KITS Tank ball mounts onto the flush assembly with brass screw part # $3.98 Page 201

27 *s are Subject to Change without Notice.* Korky Style Flapper KORKY STYLE FLAPPER TANK BALL GASKET FOR TANK BOLTS DELUXE 3-LAYER RUBBER 1/8" THICK REGULAR IS 1/16" 1-1/16" DIA. REGULAR IS 3/4" Made of the finest quality rubber, is soft and pliable, yet firm enough to seal $3.10 No Jiggle TANK BALL NO JIGGLE $3.29 TANK TO CLOSET BOLT SET SOLID BRASS BOLTS 2 PER PACK $3.49 CLOSET BOLTS SOLID BRASS Heavy Nut & Washer 2 PER PACK /4" x 2-1/4" $ /16" x 2-1/4" $2.29 CLOSET SCREWS SOLID BRASS Heavy Nut & Washer 2 PER PACK /4" x 2-1/2" $ /16" x 2-1/2" $ $0.29 SPEED NUT Closet Bolts Soft White Plastic This plastic speed nut is mainly used to hold closet bolts in place until/while installing regular nuts. Fits 1/4 and 5-16 diameter bolts. Also works well as a washer. Speed nut is.045 thick and 7/8 diameter. Sold 100 per package $14.95 Plastic Sleeve BOWL WAX RING PLASTIC SLEEVE (Kant-leak) FITS 3" & 4" OPENINGS $1.98 Wax Without Sleeve BOWL WAX RING FITS 3" & 4" OPENINGS $1.29 BOWL RING MADE OF RUBBER FITS 3" & 4" OPENINGS $3.39 TANK TO CLOSET BOLT SET ADJUSTABLE Solid brass tank bolts and slides. Correctly aligns any misaligned or odd sets $6.89 Page 202

28 *s are Subject to Change without Notice.* BRASS FLOAT ROD THREADED BOTH ENDS " LONG $ " LONG $0.98 Chromed Plated Metal Guide GUIDE FOR LIFT WIRES Universal Fit BRASS Adjustable $ PLASTIC (Not Shown) $1.08 FLOAT BALL FOR TANK TANK LEVER Made of Heavy Metal CHROME PLATED HANDLE /4" LONG ARM $2.39 Chromed Plated Plastic SEAMLESS PLASTIC $0.99 TOILET SEAT HINGE KIT White Plastic FITS MOST SEATS Rust Free Bolts & Nuts $3.98 TANK LEVER Fits Mansfield Tanks Made of Plastic " LONG ARM $2.99 Upper LEVER LIFT WIRE UPPER BRASS /2" LONG $0.79 Lower LEVER LIFT WIRE LOWER BRASS 4-1/2" LONG /2" LONG $ /2" LONG $0.98 OVERFLOW TUBES SOLID BRASS " DIA. x 10" Long, Threads One End $ " DIA. x 1-1/8" O.D. x 10" Long, Threads Both Ends $2.92 BUMPER KIT FOR TOILET SEATS For Regular Toilet Seats White $1.79 CAPS FOR TOILET BOLTS 2 WHITE PLASTIC BOLT CAPS AND 2 CAP RETAINERS $1.29 Page 203

29 *s are Subject to Change without Notice.* BEADED BALL CHAIN Nickel Plated Brass Chain is 5/32 diameter x 15 long with couplings on both ends $0.56 Standard Size TANK TO BOWLGASKETS Standard Size 3-1/4" O.D., 3/4" THICK $0.98 Kohler KOHLER 3-3/4" O.D., 11/16" THICK $2.95 Eljer ELJER 3-3/16" O.D., 7/16" THICK $2.98 Gerber & Crane GERBER & CRANE 3-3/16" O.D., 1-1/8" THICK $2.39 American Standard AMERICAN STANDARD 3-7/16" O.D., 1-1/8" THICK $1.69 Page 204

30 *s are Subject to Change without Notice.* PHOENIX HYBRID FAUCETS Metal Toughness Plastic Economy through a tough innovative poly-metal material Meets EPA s Nation-Wide Lead Free Criteria Limited Lifetime Product Warranty Phoenix Hybrid Faucet LAVATORY FAUCET TWO HANDLE This ADA compliant two handle, lead-free, 4 centers lavatory faucet had flowing lines that add a low profile arc to the bath. The smooth rounded surfaces make it easy to clean and keep shining like new. Has quarter turn washerless cartridges for years of trouble-free operation. Single-piece molded underbody ensures no leak points. Sturdy brass encased shanks ensures against breaking or cross-threading during installation. Has 2.5 gallon per minute water saving aerator. Made in USA and made with a limited lifetime product warranty. d less pop-up assembly CHROME $32.95 LAVATORY FAUCET SINGLE HANDLE This ADA compliant lead-free single lever lavatory faucet has flowing lines that add a tall sculptured-like look to any bath. The smooth rounded surfaces make it easy to clean and keep shining like new. The ceramic disk cartridge will deliver years of reliable service. Mounts in hole pattern on 4 centers. WaterSense certified by EPA. Single-piece molded underbody ensures no leak points. Sturdy brass encased shanks ensures against breaking or cross-threading during installation. Has 2.5 gallon per minute water saving aerator. Manufactured in USA with a limited lifetime product warranty. d less pop-up assembly CHROME $39.95 Phoenix Hybrid Faucet KITCHEN FAUCET SINGLE LEVER This ADA compliant lead-free gentle arching single lever kitchen faucet is designed to be mounted as a 3-hole or single hole and comes hardware for both. Has extended length stainless steel supply lines to make water hookup fast and easy. Ceramic disc cartridge will deliver years of reliable service. Made in USA with a limited lifetime product warranty. Sprayer not available CHROME without sprayer $59.95 KITCHEN FAUCET SINGLE LEVER Pull-out Spout Sprayer This ADA compliant lead-free single lever kitchen faucet has a sturdy flexible 56 long hose that allows for smooth effortless spout pull-out. Converts from a stream of water to a spray and back with the push of a button. Designed to be mounted as a single hole or a three hole mount. Ceramic disc cartridge will deliver years of trouble-free service. Made in USA with limited lifetime warranty PULL-OUT SPOUT SPRAYER $89.00 Pull Down Spout KITCHEN FAUCET Single Lever Pull Down Spout Modern-look single lever kitchen faucet with pull-down spout meets the new lead-free requirements. Spray converts from a stream of water to a spray pattern and back with the push of a button. Another button also located on the spray head shuts the water off/on as needed. Ceramic disk cartridge gives years of trouble free service. Extended supply lines and 56" spray hose are encased with braided stainless steel. Spout swivels 360 degrees. Made in USA with limited lifetime warranty CHROME $98.00 Page 205

31 *s are Subject to Change without Notice.* Exposed Riser, Phoenix PHOENIX TUB & SHOWER VALVES Lifetime Limited Product Warranty EXPOSED RISER SHOWER VALVE This 4 wide-spread exposed riser type shower valve has brass under body with brass compression type stem and bonnet with a chromed plastic outer shield. Handles are made of clear acrylic. Hook-up on back of valve is ½ mpt. Comes with riser spud and nut and shower head $39.98 Concealed Riser, Phoenix CONCEALED TYPE TUB/SHOWER VALVE Has brass stem/bonnet assembly and brass underbody " CENTERS $ /8" CENTERS $59.98 Exposed Riser, Phoenix EXPOSED TYPE TUB/SHOWER VALVE Has brass stem/bonnet assembly and brass underbody " CENTERS $ /8" CENTERS $59.49 Garden Tub Filler GARDEN TUB FILLER VALVE ADJUSTABLE WIDTH UP TO 24" Has brass stem/bonnet assembly and brass body with chromed plastic spout. Has large clear acrylic handles $52.95 Three-Valve, Phoenix THREE-VALVE TUB/SHOWER VALVE 8" CENTERS Has brass stem/bonnet assembly and brass underbody $ Valve, Phoenix TWO-VALVE TUB/SHOWER VALVE 8" CENTERS Has brass stem/bonnet assembly and brass underbody $64.95 TWO-VALVE TUB/SHOWER VALVE 8" CENTERS Has brass stem/bonnet assembly with celcon underbody. Has chromed or gold plastic housing & spout CHROME $ GOLD $49.99 TWO-VALVE SHOWER VALVE 8" CENTERS Has washerless stems, acrylic handles and plastic underbody. Comes with shower arm and shower head CHROME FINISH $21.95 All Product This Page Are Phoenix Brand. Page 206

32 *s are Subject to Change without Notice.* 8" Centers KITCHEN FAUCET Washerless 8" Centers Celcon Underbody Tubular Swing Spout Chromed Plastic Housing Clear Acrylic Handles " CENTERS $25.98 Surface Mount 2-Handle, 8" TUB & SHOWER VALVE Lavatory/Shower 4" Centers LAVATORY/SHOWER FAUCET Washerless 4" Centers Celcon Underbody Chromed Plastic Housing Clear Acrylic Handles Has Vacuum Breaker For Use With Personal Shower $25.62 Washerless 8" Centers Celcon Underbody Chromed Plastic Housing Clear Acrylic Handles " CENTERS $34.69 Valve Only, 2-Handle, 4" & 8" SHOWER VALVE Washerless Celcon Underbody Chromed Plastic Housing Clear Acrylic Handles " CENTERS $ " CENTERS $ " Centers LAVATORY FAUCET Washerless 4" Centers Celcon Underbody Chromed Plastic Housing Clear Acrylic Handles $18.79 Page 207

33 *s are Subject to Change without Notice.* 4" Centers KITCHEN FAUCET Single Lever, 4-Hole Mount SINGLE LEVER KITCHEN FAUCET Washerless 4" Centers Celcon Underbody Chromed Plastic Housing Tubular Swing Spout Clear Acrylic Handles " CENTERS $33.98 All Product This Page Are Utopia Brand. TUBULAR SPOUT HI-RISE Chromed Brass This 3/4 diameter chromed brass hi-rise tubular spout fits both 4 and 8 Utopia brand kitchen faucets. Spout comes with aerator, mounting nut, nylon sleeve and o-ring. Total height from bottom of spout to underside of aerator is 8-7/8 which has a net rise of 8 from top of faucet to underside of aerator. This additional height makes for greater clearance when washing large pots and pans. The 11/16 long nylon sleeve mentioned above fits tight around the spout and into the body of the faucet to help prevent lateral movement of the spout $16.49 Two Handle, Clear Acrylic TWO HANDLE KITCHEN FAUCET Modern look L-style single lever handle. All waterways meet new nationwide lead free requirements. Replaceable ball and seats. Has adjustable 6 or 8 centers. 2.5 gpm (gallon per minute) water saving aerator CHROME, without Sprayer $ CHROME, with Sprayer $ STAINLESS STEEL, without Sprayer $ STAINLESS STEEL, with Sprayer $64.00 Pull-Out Spray Spout KITCHEN FAUCET With PULL-OUT SPRAY SPOUT Heavy brass construction. Detachable deck plate for 1 or 3 hole installation. 1/2" mpt connections. 48" long flexible retractable hose. Water pattern converts between solid and spray with the push of a button. Internal parts interchange with Delta parts WHITE FINISH $ Heavy chrome plated metal housing with acrylic handles. All waterways meet new nationwide lead free requirements. Replaceable quarter turn washerless cartridge. 8" centers and 2.5 gpm (gallon per minute) water saving aerator CHROME, without Sprayer $ CHROME, with Sprayer $46.95 Page 208

34 *s are Subject to Change without Notice.* High Rise Long Radius Spout KITCHEN FAUCET with HIGH RISE LONG RADIUS SPOUT Two handle, heavy chromed metal housing, waterways meet new nationwide lead free requirements, quarter-turn washerless cartridges. Has 3- types of interchangeable handle inserts: white, oak & clear acrylic. Eight inch centers CHROME, without sprayer $49.95 Hi-Rise Spout KITCHEN FAUCET With HI-RISE SPOUT Two-handle design, heavy chromed metal housing, brass underbody and waterways. Quarter turn washerless cartridges. Has three different types of interchangeable handle inserts; white, oak, & clear acrylic. Eight inch centers CHROME, with sprayer $82.00 Single Lever, Clear Acrylic SINGLE LEVER LAVATORY FAUCET Single lever with clear acrylic handle, waterways that meet the new nationwide lead-free requirements, heavy metal housing. Replaceable ball and seats. Four inch centers. 2.5 gallon per minute aerator CHROME, no pop-up $ BRASS, with pop-up $ CHROME, with pop-up $45.98 Single Lever, Metal Handle SINGLE LEVER LAVATORY FAUCET Single lever style handle with waterways that meet the new nationwide lead-free requirements. Heavy chromed metal housing. Replaceable ball and seats, four inch centers and 2.5 gallon per minute aerator CHROME, no pop-up $ CHROME, with pop-up $53.98 All B&K Faucets and Valves have a 1-Year Limited Product Warranty. Two Handle, Clear Acrylic TWO HANDLE LAVATORY FAUCETS Heavy chrome plated metal housing with waterways that meet new nationwide lead free requirements. Clear acrylic handles fastened to replaceable quarter turn washerless cartridges. Four inch centers, 1.5 gallon per minute aerator CHROME, no pop-up $ CHROME, with pop-up $34.95 Page 209

35 *s are Subject to Change without Notice.* Single Lever, B&K Brand TUB and SHOWER VALVE SINGLE LEVER 3-Valve, B&K Brand TUB and SHOWER VALVE THREE HANDLE Heavy chrome or brass plated trim with acrylic handle. All brass body with 1/2" threaded connections. Replacement ball (brass) and seat assembly. 2.5 GPM water saving shower head CHROME $ BRASS $79.00 TUB and SHOWER VALVE SINGLE LEVER Heavy chrome plated brass trim with chrome plated L-handle. All brass body with 1/2 threaded connections. Replaceable ball (brass) and seat assembly. 2.5 GPM water saving shower head CHROME $ Valve, B&K Brand TUB and SHOWER VALVE 2-HANDLE Heavy chrome plated finish with acrylic handles. All brass body, has 8" centers with 1/2" combination unions for threaded or solder installation. Replacement quarter turn washerless cartridge. 2.5 GPM water saving shower head. May plug bottom valve opening, not using the spout to make a shower valve only CHROME $70.98 Heavy chrome plated finish with clear acrylic handles. All brass body, 8" centers, 1/2" combination unions for threaded or soldered connections. replacement quarter turn washerless cartridge. 2.5 gpm water saving shower head CHROME $75.69 Garden Tub Filler ROMAN TUB FAUCET by EZ-FLO This roman tub faucet from the Impressions Collection has heavy chromed plated metal housing, brass waterways, quarter turn washerless ceramic cartridges and sturdy-heavy duty chrome plated brass spout. The chrome plated brass lever handles make it easy to turn on or off with wet hands. Adjustable centers from 8 to 15 distance. Twenty-five year limited product warranty $ All B&K Faucets and Valves have a 1-Year Limited Product Warranty. Page 210

36 *s are Subject to Change without Notice.* Single Lever SINGLE LEVER KITCHEN FAUCET Sprayer in Faucet Body by EZ-FLO Chrome plated finish with single lever handle. Washerless design. All brass waterways with chrome plated metal housing. Replaceable ball and seats. Has adjustable 6" or 8" centers. 2.5 gpm (gallon per minute) water saving aerator. Twenty-five year limited product warranty $56.95 FAUCET ROSETTE Steel This steel faucet rosette is 1-3/4 outside diameter, 7/8 inside diameter and is mostly flat $0.39 FAUCET ROSETTE Steel This deep steel faucet rosette is 1-7/8 outside diameter, 7/8 inside diameter and 5/8 deep $0.69 Page 211

37 *s are Subject to Change without Notice.* Aqua Plumb Faucets KITCHEN FAUCET Two Handle Quarter Turn Chrome plated metal housing with clear acrylic handles. Has waterways and brass spout that meets no-lead requirements. Shafts are encased with 1/2 M.P.T. brass sleeves that prevent breakage and help prevent cross-threading during installation. Fits sink with 8 mounting hole centers. Uses Delta style quarter-turn cartridges and handles. Has 2.0 gallon per minute water saving aerator. Stocked in Chrome Finish NO SPRAYER $ WITH SPRAYER $39.89 Aqua Plumb Faucets LAVATORY FAUCET TWO HANDLE Chrome plated metal housing with clear acrylic handles. Waterways and metal spout meets no-lead requirements. Shafts are encased with 1/2 M.P.T. brass sleeves to prevent breakage and help prevent crossthreading during installation. Fits sinks with mounting holes on 4 centers. Uses Delta style quarter-turn cartridges and handles. Has 2.0 gallon per minute water saving aerator. Stocked in Chrome Finish NO POP-UP $22.49 KITCHEN FAUCET Two Handle Quarter Turn Hi-Rise Spout Two handle hi-rise spout kitchen faucet with chrome plated metal housing with clear acrylic handles. Has waterways and spout that meets the no-lead requirements. Shafts are encased with ½ m.p.t. brass sleeves that help prevent breakage and cross-threading during installation. Fits sinks with 8 mounting hole centers. Uses Delta style quarter turn cartridges and handles. Has 2.0 gallon per minute water saving aerator. Distance from bottom of faucet (top of sink) to underside of spout at aerator is 10 inches. Stocked in Chrome Finish WITH SPRAYER $39.89 Warranty: Aqua Plumb warrants their faucets to be free from defects in materials and workmanship for as long as the product is in the original owners possession. Should a problem arise, owner must contact Aqua Plumb with model number and original receipt. Aqua Plumb will either replace or repair product at no charge to owner. Page 212

38 *s are Subject to Change without Notice.* DIVERTER KNOB Clear acrylic knob for diverter stem on Utopia tub/shower valves. SHOWER RISER For use with all exposed type shower fixtures. 3/8" dia. x 50" long. Chrome plated brass $0.98 LOCKNUT Plastic locknut for all Utopia faucets $0.29 SLEEVE Spout sleeve for Utopia kitchen faucets $0.49 SPRAY HEAD & HOSE 48" braided reinforced hose with thumb level spray trigger $41.19 Polished Chrome FAUCET HOLE COVER Polished Chrome 2" diameter polished chrome top on a steel body. The bottom cupped washer serves as a putty cup, also enables cover to fit tight on very thin top sinks such as stainless steel sinks $2.49 Chrome Top FAUCET HOLE COVER 1-3/4" diameter chromed top on a steel body BLACK $ WHITE $ $0.98 SPRAY HEAD Fits all standard spray hoses WHITE $ BLACK $3.98 BRACKET EXPOSED SHOWER RISER Chromed Plated $2.33 Page 213

39 *s are Subject to Change without Notice.* For Series II, Old Style B&K DIVERTER CARTRIDGE B&K Tub/Shower Valve For Series II, old style B&K tub/ shower valve with 121 prefix in manufacturers part number. Made of celcon with D style brass stem. Has black rubber boot on cartridge body $8.79 For Series III, New Style B&K DIVERTER CARTRIDGE B&K Tub/Shower Valve For Series III, new style B&K tub/shower valve with 122 prefix in manufacturers part number. Made of celcon with D style brass stem. Has black rubber boot on cartridge body $8.79 Central Brass STEM & BONNET CENTRAL BRASS New Style K-3-CT $8.89 STEM & BONNET CENTRAL BRASS K-2-CT $8.89 Sterling STEM & BONNET STERLING $8.99 Gerber STEM & BONNET GERBER $7.98 Diverter Assemblies DIVERTER ASSEMBLIES FOR STREAMWAY & PHOENIX BATH FAUCETS /8", (Delrin) STEM ONLY $ /2", (Brass) STEM & BONNET $ /2", (Delrin) STEM ONLY $ /8", (Delrin) STEM & BONNET $4.98 Gerber STEM & BONNET GERBER COLD $ HOT $4.98 STEM & BONNET GERBER COLD $ HOT $4.98 Page 214

40 *s are Subject to Change without Notice.* Central STEM & BONNET CENTRAL Sterling STEM & BONNET STERLING COLD $ HOT $ COLD $ HOT $4.98 Pfister STEM & BONNET PRICE PFISTER Phoenix STEM & BONNET STREAMWAY & PHOENIX COLD $ HOT $4.98 STEM & BONNET PRICE PFISTER COLD $ HOT $6.98 STEM & BONNET STREAMWAY PHOENIX HOT OR COLD $5.49 Sayco-Noland STEM & BONNET SAYCO-NOLAND COLD $ HOT $5.98 STEM & BONNET STREAMWAY & PHOENIX Made of Brass COLD $ HOT $ OR-C COLD $ OR-H HOT $5.98 Kohler STEM & BONNET KOHLER STEM & BONNET PHOENIX Washerless P 82 Made of Delrin COLD $ HOT $ HOT OR COLD $4.98 Page 215

41 *s are Subject to Change without Notice.* Streamway STEM & BONNET STREAMWAY & PHOENIX P 60 Made of Delrin STEM & BONNET PHOENIX Made of Delrin HOT OR COLD $5.98 STEM & BONNET STREAMWAY & PHOENIX Washerless P 22 Made of Delrin HOT OR COLD $5.98 Streamway & Phoenix STEM & BONNET STREAMWAY & PHOENIX Made of Brass HOT OR COLD $6.89 Utopia Brand STEM & BONNET UTOPIA This stem and bonnet assembly is made of celecon and fits all Utopia brand products. Earlier production models used a stem with an O-ring seat, new production models use a flat washer seat. The stem and bonnet assemblies are not interchangeable. Hot and cold stems are the same O-Ring Style $ $3.98 Compression style stem and bonnet is made of delrin (plastic) and has a 00 flat washer. Overall length of stem only is 1-9/16. Stem has 17 point serrated broach. May use (61-5-0) brass assembly instead of delrin assembly HOT OR COLD $6.89 B&K Brand STEM & BONNET B & K Washerless Made of Delrin Fits Bath/Shower Valves HOT OR COLD $4.99 CARTRIDGE ASSEMBLY DELTA / DELEX Washerless Made of Delrin HOT OR COLD $4.99 CARTRIDGE ASSEMBLY MOEN/STANADYNE Made of Delrin Has O Ring Seat HOT OR COLD $4.95 Page 216

42 *s are Subject to Change without Notice.* PHOENIX SEATS (BRASS) B&K Brand Diverter Assembly B&K Brand 2-Handle Kitchen Faucets This 2-1/8"long x 17/32" diameter celcon diverter is used in B&K brand two handle kitchen faucets with sprayer /8" $ /16" $ /16" $ /16" $1.79 PHOENIX SEATS (BRASS) /16" $ /8" $1.49 B&K & Delta Lever Handle BALL ASSEMBLY Brass FOR LEVER HANDLE DELTA & B&K FAUCETS $3.98 B&K & Delta Crystal Handle BALL ASSEMBLY Brass FOR CRYSTAL HANDLE DELTA & B&K FAUCETS $ $3.10 STEM EXTENDER Tub/Shower Valves This white nylon stem extender fits some two and three handle tub/shower valves. Overall length is 3 with a diameter of 3/4. Delta/Delex and B&K look similar but are not interchangeable DELTA/DELEX $ B&K $6.98 CERAMIC CARTRIDGE Pfister This ceramic cartridge fits Pfister single lever tub and shower valves and some single handle lavatory and kitchen faucets $12.98 CARTRIDGE MOEN OLD STYLE This replacement plastic cartridge replaces old style Moen single lever tub and shower valve cartridges. Delta/Delex Peerless DIVERTER ASSEMBLY GENUINE DELTA $9.98 For single handle kitchen deck faucets. Fits Delta, B&K and Peerless brands. Replaces both brass and plastic type diverters $4.69 Page 217

43 *s are Subject to Change without Notice.* CARTRIDGE MOEN NEW STYLE This replacement brass cartridge replaces new style Moen single lever tub and shower valve cartridges. Front Diverter SPOUT WITH DIVERTER CHROMED METAL $ $19.95 CARTRIDGE KIT Phoenix Single Lever Kitchen & Lavatory Faucets Cartridge fits some Phoenix single lever kitchen and lavatory faucets. The metal underbody faucets require a slightly different cartridge than the plastic underbody faucets. We stock both cartridges METAL FAUCETS $ PLASTIC FAUCETS $12.98 SPOUT for ROMAN TUB FAUCET Made of hi-impact plastic CHROME $ G GOLD $19.95 Chromed Metal TUB SPOUT Chromed Metal This spout is designed to slip over a pipe/tube that is 5/8 outside dimension. A set screw on bottom rear of spout tightens against pipe $8.98 For Fill Spout LOCKNUT ZINC PLATED STEEL For fill spout (1/2"dia.20 tpi, female)and valve body (1" dia.20 tpi, female)on Phoenix brand Roman tub valve. Also fits other brand valves VALVE BODY $ FILL SPOUT $0.69 No Diverter TUB SPOUT Chromed Metal 1/2" f.p.t. in nose of spout $6.69 Rear Diverter DIVERTER SPOUT CHROMED METAL Body Tapped 3/4" F.P.T. with 3/4" to 1/2" Face Bushing $8.69 Rear Diverter with Personal Shower Connection DIVERTER SPOUT CHROMED METAL Personal Shower Connection $10.65 Streamway & Phoenix Diverter DIVERTER SPOUT Fits most 3-3/8" & 4" Streamway and Phoenix Valves Chromed Plastic $9.89 Empire Brass Diverter AUTO DIVERTER SPOUT Fits Empire Brass Valves J68 Made of Chromed Plastic $12.50 Page 218

44 *s are Subject to Change without Notice.* MIXING TEE Phoenix Roman Tub Valve This high-impact plastic tee screws onto tub spout. Supply tubes from hot and cold valve assemblies connect to tee $4.49 SOAP & LOTION DISPENSER Color goes thru entire pump head, will not chip, peel or crack. Heavy duty pump mechanism. Refillable from top of sink. Polypropylene bottle. CONNECTOR HOSE Roman Tub Valve 12" long flexible hose for Phoenix brand roman tub faucets. Connects hot and/or cold valve(s) to mixing tee. Requires two per roman tub valve $5.09 CENTER DIVERTER NIPPLE Fits Empire Brass Valves Made of Celcon Plastic WHITE $ ALMOND $ CHROME $15.98 BASIN STRAINER 1" Basin Strainer Nickel Plated Brass $1.15 BATH DRAIN GRID STRAINER Chrome Plated $6.98 Empire Brass Spout DIVERTER For Empire Spout $5.35 SHOWER DIVERTER This two-way diverter is made of chrome plated plastic with push button transfer valve. Has 1/2" female pipe threads on inlet and 1/2" male pipe threads on outlets $ $0.99 TOE-TOUCH DRAIN Bath Tubs Made of chrome plated metal. Fits all bath tubs with 1-3/4" to 2-1/4" drain opening. Has adjustable, replaceable spring cartridge with 5/16" threads. Has 1-3/4" O.D. coarse (11.5 threads per inch) threaded shank. Flange is 2-3/4" outside diameter. Comes with gasket and nut COARSE THREAD (11.5 TPI) $ FINE THREAD (16 TPI) $9.98 TOE-TOUCH DRAIN STOPPER Made of chrome plated ABS plastic. Has a solid mounting/adjusting screw. Comes with rubber seal. Simply push to close, push to open. 5/16 thread size fits coarse thread (11.5 TPI) drain body. 3/8 thread size fits fine thread (16 TPI) drain body /16" THREAD $ /8" THREAD $4.49 Page 219

45 *s are Subject to Change without Notice.* BATH TUB DRAIN Made of chrome plated metal. Fits all bath tubs with 1-3/4" to 2-1/4" drain openings. Has 1-3/8" fine (16 TPI.) threaded shank. Flange is 2-3/4" outside diameter. Tapped for 3/8 threaded toetouch drain stopper assembly $6.49 BATH TUB DRAIN Made of chrome plated metal. Fits all bath tubs with 1-7/8" to 2-1/4" drain opening. Has 1-1/2" coarse (11.5 TPI) threaded shank. Flange is 2-3/4" outside diameter. Bottom is tapped for 5/16" thread toe-touch stopper assembly $6.49 TUB DRAIN ASSEMBLY Drain is made of raw brass. Has 1-3/8" fine (16 TPI) threaded shank. Has 2-7/8" OD stainless steel grid with #10/24 screw. Comes with gasket $6.98 TUB SHOE GASKET Stainless Steel SINK STRAINER Stainless steel basket and strainer. Fits sinks with 3-1/2" to 4" opening. Double cup design $6.98 SINK STRAINER All stainless steel construction. Fits sinks with 3-1/2" to 4" opening $5.20 PVC SINK STRAINER Made of white PVC. Fits sinks with 3-1/2" to 4" opening. Has white PVC basket $3.39 This rubber gasket is 1-3/4"ID x 2-5/8"OD x 3/32" thick $0.59 Celcon DECORATIVE DEEP SINK STRAINER BATH DRAIN STRAINER Made of stainless steel, 2-7/8" OD with chromed brass 10/24 x 1-3/4" screw $3.19 TUB DRAIN BUSHING Made from celcon, will not chip, peel or crack. Color goes thru entire strainer. Positive sealing color matching crumb cup. Fits sinks with 3-1/2" to 4" openings. Matches the color of our composite sinks WHITE $ BONE $ /2 coarse thread (11.5 TPI) outside diameter by 1-3/8 fine thread (16 TPI) inside diameter. Made of brass $5.49 Page 220

46 *s are Subject to Change without Notice.* Stainless Steel With Chrome Plated Post BASKET STRAINER Replacement basket made of stainless steel with chrome plated post. Fits standard drains. Has rubber seal ECONOMY GRADE $ DELUXE GRADE $3.98 Stainless Steel BASKET STRAINER Basket made of stainless steel. Has rubber seal. Chrome post $2.09 BASKET STRAINER Basket made of stainless steel with spring steel closure. Fits standard drains. Has rubber seal $3.49 BASKET STRAINER Basket made of stainless steel with rubber seal. Has short chromed post $2.89 Flat Top SINK STRAINER Flat Top Chromed Finish Fits All Sinks With 1-7/8" To 2-1/4" Opening $5.98 Bar/Laundry Sind STRAINER Bar or Laundry Fits 2-1/2" Openings $3.98 Page 221