Power Supplies. Automation & Sensing.

Size: px
Start display at page:

Download "Power Supplies. Automation & Sensing."

Transcription

1 Automation & Sensing Selection Guide PS6R Standard Series Part umbers Specifications Dimensions PS5R-V Series Part umbers Specifications Dimensions PS5R Slim ine Series Part umbers Specifications Dimensions and Terminal Markings PS5R Standard Series Part umbers Specifications Dimensions PS3X Series Part umbers Specifications Dimensions Safety Precautions Power Supplies OI Touchscreens PCs Automation Software Sensors Communication Barriers Table of Contents ED ighting - Pg. 1 Automation & Sensing - Pg. 21 Safety - Pg. 281 Switching & Controls - Pg. 483 Index - Pg. 139

2 Selection Guide OI Touchscreens Selection Guide Series PS6R PS5R-V PS5R Slim ine PS5R PS3X PS3 Appearance Sensors Automation Software PCs Page Housing Metal Plastic Metal Metal Mounting DI Rail DI Rail or surface mount; 6 direction Visit powersupply DI Rail or surface mount Direct or DI Rail mount Panel or bracket mount Wattage Range 12W to 48W 7.5W to 24W 1W to 24W 7.5W to 48W 15W to 1W 1W to 3W Input Voltage Current Ratings Typical Efficiency 1 to 24 V A, 11 to 35V DC 85 to 264V AC, 1 to 37V DC 85 to 264 V AC, 1-37 V DC (1-35V DC, 12W & 24W) 85 to 264V AC, 15 to 37V DC 85 to 264V AC, 12 to 375V DC 85 to 264V AC, 15 to 37V DC 5V DC 2A 1.5A, 2.A 2.A 1.5A, 2.5A 3A, 5A, 12A, 16A 2A, 3A, 6A 12V DC 1A.6A, 1.3A, 2.5A 1.2A, 2.5A.6A, 1.2A, 2.5A 1.3A, 2.1A, 4.2A, 6A, 8.5A 24VDC 5V DC 5A, 1A, 2A.3A,.65A, 1.3A, 2.5A, 3.75A, 5.A, 1.A.65A, 1.3A, 2.5A, 3.75A, 5A, 1A.3A,.6A, 1.3A, 2.1A, 3.1A, 4.2A, 5A, 1A, 2A.63A, 1.1A, 2.2A, 3.2A, 4.5A up to 77% 69% 69% 77% 7-75%.9A, 1.4A, 2.5A, 4.3A, 8.5A, 13A.5A,.7A, 1.3A, 2.2A, 4.5A, 6.5A, 12.5A 12V DC up to 93% up to 85% 75%, 78% 73% to 75% 81% to 82% 74% to 8% 24V DC up to 9% 8% to 84% 75% to 91% 82% to 84% 78% to 82% Voltage Adjustments +/-1% Ripple Voltage Overvoltage Protection (input) Overcurrent Protection (output) Operating Temperature 1.5%peak to peak max (including noise) +/-1% (+/- 5% for 9W) +/-1% (V.ADJ control on front) - 2% peak to peak max (including noise) 16mV maximum 12% - 12% or more, auto reset 12% typical 115% typical 12% typical 15 to 12% (auto reset) -1 to +7 C (14 to 14 F) 15% minimum (11% for 9W), auto reset 15% min shutdown 15% minimum (Zener or auto reset) -25 C to +75 C -1 to +7 C (14 to 14 F) -1 to +85 C Termination M3.5 phillip/slotted, spring loaded, captive (fingersafe) M3 or M3.5-1 to +6 C (14 to 14 F) IEC Style screw terminals (fingersafe) U58 isted File #E U58 isted File #E Communication Approvals ASI/ISA isted File#E ASI/ISA isted File#E ASI/ISA isted File#E Cert o. B (SEMI F47 12W & 24W only) Barriers

3 PS6R Series PS6R Series Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module for additional terminals Power Range: 12W, 24W, 48W Input voltage: 1 to 24V AC (voltage range: 85 to 264V AC/11 to 35V DC) Up to 7ºC (158ºF) operating temperature DC low ED indicator and output contact The terminals are captive spring-up screws. Ring or fork terminals can be used. Finger-safe construction prevents electric shocks. Panel mount bracket and side-mount panel mounting bracket. Can be attached to a DI rail or directly to a panel surface. RoHS compliant U listed for Class 1, Division 2 Hazardous ocations Meets SEMI F47 Sag Immunity ABS Certified for maritime use PS6R Capacity* 12W Part o. PS6R-F24 Input Voltage Voltage 24W PS6R-G24 85 to 264V AC 21.6 to 26.4V 1A 48W PS6R-J24 2A * voltage output current = output capacity Current 5A 37mm 6mm 85mm Applicable Standards Mark File o. or Organization U58 CSA C22.2 o E695-1 E5178 E Part umbers C ISTED US U/c-U isted File o. E TÜV SÜD EU ow Voltage Directive EMCD Accessories Item Part o. ote Voltage Expansion PS9Z-6RM1 : +5V, 2A, 1W Module ote 1 PS9Z-6RM2 : +12V, 1A, 12W PS9Z-6RM3 : +5V, 1A/-5V, 1A, 1W PS9Z-6RM4 : +15V,.4A/-15V,.4A, 12W PS9Z-6RM5 : +5V, 1A/+12V,.5A, 11W PS9Z-6RM6 : +12V,.5A/-12V,.5A, 12W Branch Terminal Module ote 2 PS9Z-6RS1 Additional screw terminals for wiring: 2 + terminals / 2 - terminals Panel Mounting Bracket PS9Z-6R1F Side-mount Panel Mounting Supplied with M3 6 countersunk PS9Z-6R2F Bracket mounting screws DI Rail BD1 1,mm DI Rail End Clip B6 1. When using an output voltage expansion module, reduce 1A from the output current of PS6R. 2. When using a branch terminal module, the total voltage/current of PS6R and the branch terminal module should not exceed the rated current/voltage of PS6R OI Touchscreens PCs Automation Software Sensors Communication Barriers 12W shown with Branch Terminal module attached IDEC (4332) USA & Canada 167

4 PS6R Series Communication Sensors Automation Software PCs OI Touchscreens PS6R Input Supplementary Functions Dielectric Strength Specifications Part o. PS6R-F24 PS6R-G24 PS6R-J24 Input Voltage 1 to 24V AC (Voltage range: 85 to 264V AC/11 to 35V DC) (oad 8% at 85 to 1V AC, 11 to 14V DC) ote 1 Frequency 5/6Hz Input Current 1V AC 1.4A typ 2.7A typ 5.5A typ. 23V AC.7A typ 1.2A typ 2.3A typ. Inrush 1V AC 9A max. (Ta=25ºC, 1V AC cold start) Current 23V AC 2A max. (Ta=25ºC, 23V AC cold start) eakage 12V AC.5mA max. Current 23V AC 1mA max. Efficiency 1V AC 9% 9% 91% (Typical) 23V AC 9% 91% 93% Power Factor 1V AC (Typical) 23V AC Rated Voltage/Current 24V/5A 24V/1A 24V/2A Adjustable Voltage Range ±1% Holding Time 2ms min. (at rated input and output) Start Time 8ms max. (at rated input and output) Rise Time 2ms max. (at rated input and output) Regulation Total Fluctuation Input Fluctuation oad Fluctuation Temperature Change Ripple (including noise) ±5% max..4% max..6% max..5%/oc max. ( 1 to +6ºC) 1% p-p max. ( to +6ºC) 1.5% p-p max. ( 1 to ºC) Overcurrent Protection 15 to 12% (auto reset) (output current when voltage drops by 5%) Overvoltage Protection off at 12% ote 2 Operation Indicator Voltage ow Indication ED (green) ED (amber) Between input and output terminals 3V AC, 1 minute Between input and ground terminals 2V AC, 1 minute Between output and ground terminals 5V AC, 1 minute Insulation Resistance 1MΩ min. 5V DC megger (between input and output terminals/between input and ground terminals) (at room temperature and normal humidity) Operating Temperature 1 to +7ºC (no freezing) ote 3 Operating Humidity 2 to 9% RH (no condensation) Storage Temperature 25 to +75ºC (no freezing) Storage Humidity 2 to 9% RH (no condensation) Vibration Resistance 1 to 55 Hz, amplitude.375 mm (.187mm using PS9Z-6R1F) 2 hours each in 3 axes, 6 directions Shock Resistance 3 m/s 2 (15 m/s 2 when using a PS9Z-6R1F panel mounting bracket) EMC EMI E (Class B) EMS E (industrial) Degree of Protection IP2 (IEC 6529) Weight (approx.) 63g 96g 14g Terminal Screw M3.5 (See last page for wire sizes) 1. DC input voltage is not subjected to safety standards. 3. See the output derating curves. 2. One minute after the output has been turned off, turn on the input again. Easily Expandable Barriers Voltage Expansion Module In addition to the standard 24V output, additional 5, 12, and 15V outputs can be added. Branch Terminal Module Two terminals can be added. o wiring is required, reducing installation space

5 PS6R Series Accessories (For use with PS6R) Part o. Voltage Expansion Module Branch Terminal Module PS9Z-6RM1 PS9Z-6RM2 PS9Z-6RM3 PS9Z-6RM4 PS9Z-6RM5 PS9Z-6RM6 PS9Z-6RS1 Input Voltage 24V DC Capacity 1W max. 12W max. 1W max. 12W max. 11W max. 12W max. Rated Voltage/Current 5V/2A 12V/1A ±5V 2A ±15V.4A 5V/1A, 12V/.5A ±12V.5A 24V/1A max. ote 1 Adjustable Voltage Range ot available Voltage Accuracy ±5% max. Start Time 2 ms max. (at rated input and output) Input Fluctuation.5% max. Supplementary Functions Regulation oad Fluctuation Temperature Change Ripple (including noise) Overcurrent Protection 1.% max..5%/max. ( 1 to +6 C) 1mV max. 15mV max. 1mV max., 15mV max. 15% (auto reset) Overvoltage Protection off at 12% Operating Temperature 1 to +7 C (no freezing) ote 2 Operating Humidity 2 to 9%RH (no condensation) Storage Temperature 25 to +75 C (no freezing) Storage Humidity 2 to 9% RH (no condensation) Vibration Resistance 1 to 55 Hz, amplitude.375 mm, 2 hours each in 3 axes, 6 directions (in combination with PS6R-J24) Shock Resistance 3 m/s 2 (15 m/s 2 when using a PS9Z-6R1F panel mounting bracket), 3 shocks each in 6 axes (in combination with PS6R-J24) EMC EMI E (Class B) (in combination with PS6R- 24) EMS E (industrial) (in combination with PS6R- 24) Safety Standards U58 (isting), CSA C22.2 o.17.1, IEC/E695-1, E5178 (in combination with PS6R- 24) Degree of Protection IP2 (IEC 6529) Weight (approx.) 9g 3g Terminal Screw M3.5 (See last page for wire sizes.) 1. Ensure that the current does not exceed the rated current of the PS6R. 2. See the output derating curves. Wide Operating Termperature Range Operates without derating at to 6ºC Operates at 1 to 7ºC Operating Temperature ( C) Easy Maintenance - ED Indicator Status ormal Overload or Input Voltage ow* DC O (green ED) DC ow (amber ED) *The EDs turn on when the input voltage drops. short-circuit OFF Energy-saving 93% Efficiency (48W) Efficiency (%) Input Voltage (V AC) PS6R-J24 Competitor A Competitor B OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 169

6 PS6R Series Dimensions (mm) OI Touchscreens PS6R-F M3.5 Terminal Screws A A PS6R-G M3.5 Terminal Screws A A PS6R-J M3.5 Terminal Screws A A PCs 37 A = A A A A 6 A = A A A A A A 85 A = PS9Z-6R1F Panel Mounting Bracket 28 4-M4 or ø4-4.5 holes When a PS9Z-6R1F is installed on PS6R A A Sensors 1 Automation Software Panel cut-out PS9Z-6R2F (Side-mount Panel Mounting Bracket) 56 4-M4 or ø4-4.5 holes (Front view) (Side view) When a PS9Z-6R2F is installed on PS6R B C 4-M4 or 4-ø4.5 holes D Panel cut-out (Front view) 11.8 (Side view) Mounting Screws (M3 6 countersunk screw) Communication When using a PS9Z-6RM* Voltage Expansion Module When using a PS9Z-6RS1 Branch Terminal Module Dimension Table A B C D E PS6R-F Barriers PS6R-G PS6R-J Mounting Screws 17.2 Mounting 27.8 Screws E

7 PS6R Series The PS6R should be placed in a proper enclosure. It is designed to be used with general electrical equipment and industrial electric devices. Operation otes 1. interruption may indicate blown fuses. Contact IDEC. 2. The PS6R contains an internal fuse for AC input. When using DC input, install an external fuse or DC input. To avoid blown fuses, select a fuse in consideration of the rated current of the internal fuse. Rated Current of Internal Fuses Part o. Internal Fuse Rated Current PS6R-F24 4A PS6R-G24 6.3A PS6R-J24 1A -- Avoid overload and short-circuit for a long period of time, otherwise internal elements may be damaged. -- DC input operation is not subjected to safety standards. Installation otes The PS6R can be installed in the direction shown below only. Up Vertical When using PS9Z-6R1F Panel Mounting Bracket When using PS9Z-6R2F Side-mount Panel Mounting Bracket Do not close the top and bottom openings of the PS6R to allow for heat radiation by convection. Maintain a minimum of 2mm clearance around the PS6R, except for the top and bottom openings. When derating of the output does not work, provide forced air-cooling. Make sure to wire the ground terminal correctly. For wiring, use wires with heat resistance of 6ºC or higher. Use copper wire of the following sizes. Wires of the following sizes must be used to comply with U58, CSA C22.2 o Model Terminal Wire Size/o. of Wire Wire Type Input AWG, 1-wire PS6R-F AWG, 1-wire, (18 AWG - 7A, PS6R-G24 16 AWG - 1A, 14 AWG - 15A) DC OK AWG, 1-wire (stripped wire length: 6 to 7mm) Input AWG, 1-wire AWG, 2-wire Use the same size wire for each terminal (18 AWG - 7A, 16 AWG - 1A, 14 AWG - 15A) PS6R-J24 DC OK PS9Z-6R 12 AWG, 1-wire AWG, 1-wire (stripped wire length: 6 to 7mm) AWG, 1-wire (18 AWG - 7A, 16 AWG -1A, 14 AWG - 15A) Copper Solid/Stranded Copper Solid/Stranded Use with U-listed ring/ fork crimp terminal. Copper Solid/Stranded Operating Instructions Torque, in-ibs ( m) 7. (.8) 7. (.8) Applicable Crimp Terminal ø3.6 min. (reference) 6.6 max. 4 max. 5.5 min. Recommended tightening torque of the input and output terminals is.8 m. The output voltage can be adjusted within ±1% of the rated output voltage by using the V.ADJ control. ote that overvoltage protection may work when increasing the output voltage. When large shocks or heavy vibrations on the PS6R are expected, the use of DI rail or PS9Z-6R2F side-mount panel mounting bracket is recommended. Series Operation The following series operation is allowed. Connect Schottky barrier diodes as shown below. voltage expansion modules cannot be connected in series. (a) +V V +V V oad oad Select a Schottky diode in consideration of the rated current. The diode s reverse voltage must be higher than the PS6R s output voltage. Parallel Operation Parallel operation is possible to increase the output capacity. voltage expansion modules cannot be connected in series. +V V +V V oad When increasing the capacity, observe the following. 1. Maintain the operating temperature below 4ºC. 2. cannot be connected directly in parallel operation. Connect a diode to the output of each PS6R. 3. terminal voltage of both power supplies must be the same. Also, maintain the voltage difference between the power supplies below 3mV. 4. Use load lines of the same diameter and length. 5. Set the output voltage higher for the amount of diode forward voltage drop. 6. Turn on the inputs at the same time. 7. Select a diode in consideration of: Diode s reverse voltage must be higher than the PS6R s output voltage. Diode s current must be three times the PS6R s output current. Provide a heat sink for heat dissipation. (b) +V V +V V oad OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 171

8 PS6R Series OI Touchscreens PS6R-J24 PS6R-6RM1/M2/M3 Voltage Expansion Module PS9Z-6RM3/M4/M6 Voltage Expansion Module PS6R-6RS1 Branch Terminal Module PCs Automation Software (PS6R-6RM5 shown) PS6R- 24/PS9Z-6RS1 Marking ame Description, Input Terminal Voltage range: 85 to 264V AC/11 to 35V DC Ground Terminal Be sure to connect this terminal to a proper ground. +V, V DC Terminals +V: Positive output terminal V: egative output terminal VR.ADJ Voltage Adjustment Allows adjustment within ±1%. Turning clockwise increases the output voltage. DC O Operation Indicator (green) ights on when the output voltage is on. DC OW ow Indicator (Amber) ights on when the output voltage drops approximately 8% of the rated value. DC OK DC OK ights on when the output voltage is more than 8% of the rated value. P transistor output (5V DC max., 5 ma max.) PS9Z-6RM Marking ame Description +5V, +12V, +15V DC Terminal +5V side, +12V side, +15V side -5V, -12V, -15V DC Terminal -5V side, -12V side, -15V side COM DC Terminal V side (wired internally to V of PR6R-J24) Sensors Communication Barriers Characteristics Operating Temperature vs. Current (Derating Curves) Operating Temperature (ºC) Current vs. Input Voltage (Derating Curves) (Ta=25ºC) (ACV) 85 1 (DCV) Operating Temperature approved by Safety Standards Part o. U58, CSA C22.2 o E695-1, E5178 PS6R-F24 6ºC 6ºC PS6R-G24 6ºC 6ºC PS6R-J24 55ºC 6ºC PS9Z-6R 55ºC 6ºC Input Voltage(V) Voltage (%) Overcurrent Protection Characteristics Overcurrent Protection PS6R- 24 Characteristics PS9Z-6RM* Pulse Current (Approx. 3A rms, 4A peak) Input Current (%) 15% 1 12% 95% F24 G24 J

9 PS6R Series PS6R-J24 PS6R- 24/PS9Z-6RS1 Marking ame Description PS6R-6RM1/M2/M3 Voltage Expansion Module Parts Description, Input Terminal Voltage range: 85 to 264V AC/11 to 35V DC PS9Z-6RM3/M4/M6 Voltage Expansion Module (PS6R-6RM5 shown) Ground Terminal Be sure to connect this terminal to a proper ground. +V, V DC Terminals +V: Positive output terminal V: egative output terminal VR.ADJ Voltage Adjustment Allows adjustment within ±1%. Turning clockwise increases the output voltage. DC O Operation Indicator (green) ights on when the output voltage is on. DC OW ow Indicator (Amber) ights on when the output voltage drops approximately 8% of the rated value. DC OK DC OK ights on when the output voltage is more than 8% of the rated value. P transistor output (5V DC max., 5 ma max.) PS9Z-6RM Marking ame Description +5V, +12V, +15V DC Terminal +5V side, +12V side, +15V side -5V, -12V, -15V DC Terminal -5V side, -12V side, -15V side COM DC Terminal V side (wired internally to V of PR6R-J24) Operating Temperature vs. Current (Derating Curves) Operating Temperature (ºC) Current vs. Input Voltage (Derating Curves) (Ta=25ºC) (ACV) 85 1 (DCV) Input Voltage(V) Operating Temperature approved by Safety Standards Part o. U58, CSA C22.2 o E695-1, E5178 PS6R-F24 6ºC 6ºC PS6R-G24 6ºC 6ºC PS6R-J24 55ºC 6ºC PS9Z-6R 55ºC 6ºC Characteristics PS6R-6RS1 Branch Terminal Module Overcurrent Protection Characteristics PS6R- 24 Overcurrent Protection Characteristics PS9Z-6RM* Voltage (%) Pulse Current (Approx. 3A rms, 4A peak) Input Current (%) 15% 1 12% 95% F24 G24 J24 24 OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 173

10 PS5R-V Series OI Touchscreens PS5R-V Series Switching DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations Key Features PCs Automation Software Standards Compliance Applicable Standards Mark File o. or Organization U58 U131 1 ASI/ISA CSA C22.2 o.17.1 CSA C22.2 o.213 CSA C22.2 o E695-1 E5178 E E5581 SEMI F47 EPRI ote 1: PS5R-VA/VB/VC/VD/VE only ote 2: E695-1, E5178 only U/c-U isted File o. E467154, E TÜV SÜD ² EU ow Voltage Directive, EMC Directive RoHS Directive Part umbers Compact size preserves panel space Slim size (width): 22.5mm (1W/15W/3W) 36mm (6W/9W) 45mm (7.5W) 46mm (12W) 6mm (24W) Universal Voltage Input: V AC/1-37V DC Wide operating temperature range Spring-up terminals accept ring & fork terminals Approved for use in Class I Division 2 hazardous locations Can be installed in 6 directions 7.5W ~ 9W meet EC Class 2 output ratings Overcurrent protection with auto-reset Meets SEMI F47 Sag Immunity (28V AC input) RoHS compliant Five-year factory warranty Capacity Part umber Input Voltage Voltage Current Sensors Communication Barriers 7.5W PS5R-VA5 5V 1.5A PS5R-VA12 12V.6A PS5R-VA24 24V.3A 1W PS5R-VB5 5V 2.A 15W 3W PS5R-VB12 12V 1.3A PS5R-VB24 1 to 24V AC (Voltage range: 85 to 264V AC / 24V.65A PS5R-VC12 1 to 37V DC) 12V 2.5A PS5R-VC24 24V 1.3A 6W PS5R-VD24 24V 2.5A 9W PS5R-VE24 24V 3.75A 12W PS5R-VF24 24V 5.A 24W PS5R-VG24 24V 1.A Capacity A: 7.5W B: 1W/15W C: 3W D: 6W E: 9W F: 12W G: 24W Part umber Structure PS5R - V Voltage 5: 5V 3 12: 12V 4 24: 24V ote 3: PS5R-VA/VB only ote 4: PS5R-VA/VB/VC only Use only for interpreting part numbers. Do not use for developing part numbers

11 PS5R-V Series Specifications Input Model 5V DC output PS5R-VA5 PS5R-VB V DC output PS5R-VA12 PS5R-VB12 PS5R-VC V DC output PS5R-VA24 PS5R-VB24 PS5R-VC24 PS5R-VD24 PS5R-VE24 PS5R-VF24 PS5R-VG24 Capacity 7.5W 15W (5V Model is 1W) 3W 6W 9W 12W 24W Rated Input Voltage 1 to 24V AC (Single-phase two-wire) 1 (Voltage range: 85 to 264V AC/1 to 37V DC) (oad 8% at 1-15V DC) Frequency Input Current (Typ.) Inrush Current (Typ.) (Ta=25 C, cold start) 5/6 Hz 1V AC 5V:.2A 12V, 24V:.18A 5V:.25A 12V, 24V:.35A.7A 1.3A 1.1A 1.4A 2.7A 23V AC 5V:.12A 12V, 24V:.1A 5V:.14A 12V, 24V:.19A.3A.8A.6A.7A 1.2A 1V AC 15A 18A 14A 23V AC 36A 45A 41A 3A eakage Current 12V AC.5mA max. 23V AC 1.mA max. Efficiency (Typ.) 1V AC 5V: 74%, 12V: 79%, 24V: 8% 5V: 77%, 12V: 82%, 24V: 84% 12V: 83%, 24V: 85% 86% 88% 89% (at rated output) 2 23V AC 5V: 73%, 12V: 77%, 24V: 76% 5V: 73%, 12V: 8%, 24V: 81% 12V: 85%, 24V: 87% 86% 89% 9% Power Factor (Typ.) 1V AC.99 23V AC Rated Voltage/Current 5V/1.5A, 12V/.6A, 24V/.3A 5V/2.A 3, 12V/1.3A, 24V/.65A 12V/2.5A, 24V/1.3A 24V/2.5A 24V/3.75A 24V/5A 24V/1A Adjustable Voltage Range ±1% ±5% ±1% Holding Time 1V AC 45ms 5V: 53ms, 12V: 34ms, 24V: 36ms 12V: 13ms, 24V: 15ms 13ms 2ms 3ms (Typ.) (at rated output) 23V AC 285ms 5V: 33ms 12V: 215ms 12V: 11ms 24V: 11ms 15ms 3ms 33ms 4ms 24V: 23ms Start Time (at rated input and output) 5ms max. 5ms max. 6ms max. 8ms max. 7ms max. 8ms max. 5V, 12V: 2ms max Rise Time (at rated input and output) 5V, 12V: 2ms max. 24V: 25ms max. 2ms max. 24V: 25ms max Input Fluctuation.4% max. oad Fluctuation 5V: 2.5% max. 12V, 24V: 1.% max. 1.% max..4%/ C max. (-1 to Temperature Change.5%/ C max. (-1 to +65 C ) 12V:.5%/ C max. (-1 to +5 C).5%/ C max..5%/ C max..5%/ C max..5%/ C max. +65 C ) 24V:.5%/ C max. (-1 to +55 C) (-1 to +55 C ) (-1 to +5 C ) (-25 to +55 C ) (-25 to +5 C) Regulation Ripple (including noise) 5V: 8% p-p max. (-25 to -1 C) 12V: 6% p-p max. (-25 to -1 C) 24V: 4% p-p max. (-25 to -1 C) 5V: 5% p-p max. (-1 to + C) 12V: 2.5% p-p max. (-1 to + C) 24V: 1.5% p-p max. (-1 to + C) 5V: 2.5% p-p max. ( to +65 C) 12V: 1.5% p-p max. ( to +65 C) 24V: 1% p-p max. ( to +65 C) 5V: 8% p-p max. (-25 to -1 C) 12V: 6% p-p max. (-25 to -1 C) 24V: 4% p-p max. (-25 to -1 C) 5V: 5% p-p max. (-1 to + C) 12V: 2.5% p-p max. (-1 to + C) 24V: 1.5% p-p max. (-1 to + C) 5V: 2.5% p-p max. ( to +65 C) 12V: 1.5% p-p max. ( to +65 C) 24V: 1% p-p max. ( to +65 C) 12V: 6% p-p max. (-25 to -1 C) 24V: 4% p-p max. (-25 to -1 C) 12V: 2.5% p-p max. (-1 to + C) 24V: 1.5% p-p max. (-1 to + C) 12V: 1.5% p-p max. ( to +5 C) 24V: 1% p-p max. ( to +55 C) 1% p-p max. ( to +55 C) 1% p-p max. ( to +5 C) 4% p-p max. (-25 to -1 C) 1.5% p-p max. (-1 to + C) 1% p-p max. ( to +55 C) Overcurrent Protection 15% min. (auto reset) 11% min. (auto reset) 15% min. (auto reset) Operation Indicator ED (green) Between input and output terminals 3,V AC, 1 minute Between input and ground terminals 2,V AC, 1 minute Dielectric Strength Between output and ground terminals 5V AC, 1 minute Insulation Resistance Between input and output terminals: 1MΩ min. (5V DC megger) Between input and ground terminals: 1MΩ min. (5V DC megger) Operating Temperature 4 (o freezing) -25 to +75 C -25 to +7 C -25 to +65 C Operating Humidity (no condensation) 2 to 9% RH Storage Temperature (o freezing) -25 to +75 C Storage Humidity (no condensation) 2 to 9% RH Vibration Resistance 1 to 55Hz, amplitude.375mm, 2 hours each in 3 axes (when used with B6 end clips) 1 to 55Hz, amplitude.33mm, 2 hours each in 3 axes (when used with B6 end clips) 1 to 55Hz, amplitude.375mm, 2 hours each in 3 axes (when used with B8 end clips) 1 to 55Hz, amplitude.21mm, 2 hours each in 3 axes (when used with B6 end clips) 1 to 55Hz, amplitude.375mm, 2 hours each in 3 axes (when used with B8 end clips) 1% p-p max. ( to +5 C) 1 to 55 Hz, amplitude.375mm, 2 hours each in 3 axes (when used with part no. B6 mounting clips) Shock Resistance 3 m/s 2 (3G), 3 times each in 6 directions Expected ife 5 8 years minimum (at the rated input, 5% load, operating temperature +4 C, standard mounting direction) EMC EMI E (Class B) EMS E (industrial) Safety Standards U58 (isting), U131 Class 2, ASI/ISA U58 (isting) ASI/ISA CSA C22.2 o. 17.1, 213, 223 E695-1, E5178 CSA C22.2 o. 17.1, 213 E695-1, E5178 Other Standard SEMI F47 (at 28V AC input only) Degree of Protection IP2 (E6529) Dimensions (mm) 75H 45W 7D 9H 22.5W 95D 95H 36W 18D 115H 46W 121D 125H 6W 125D Weight (approx.) 13g 14g 15g 26g 31g 47g 96g Terminal Screw M3.5 *At normal temperature and humidity unless otherwise specified. ote 1: DC input voltage is not subject to safety standards. When using on DC input, connect a fuse to the input terminal for DC input protection. ote 2: Under stable state. ote 3: PS5R-VB5 (5V DC/2.A) is 1W (Up to 3.A at Ta = to 4 C. ot subject to safety standards above 2.A.) ote 4: See the output derating curves. ote 5: Calculation of the expected life is based on the actual life of the aluminum electrolytic capacitor. The expected life depends on operating conditions. OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 175

12 PS5R-V Series Characteristics Barriers Communication Sensors Automation Software PCs OI Touchscreens Operating Temperature vs. Current (Derating Curves) Conditions: atural air cooling (Operating temperature is the temperature around the switching power supply.) PS5R-VA5, -VA12, -VA24 PS5R-VB5, -VB12, -VB24 PS5R-VC Mounting B, C, D, F Mounting A,E Input Voltage: 85-1V AC Mounting B, C, D, E, F Mounting A Operating Temperature ( C) Operating Temperature ( C) Operating Temperature ( C) PS5R-VC24 PS5R-VD24 PS5R-VE Mounting A, B 1 Mounting E Mounting A Input Voltage: 85-1V AC Mounting C 3 2 Mounting D, E, F PS5R-VF Operating Temperature ( C) Mounting F Operating Temperature ( C) Mounting C, E Mounting B, D Mounting A Input Voltage vs. Current (Derating Curves) Ta=25 C PS5R-VB5, -VB12, -VB24, -VC12, -VC24, -VD24, -VE24, -VF (ACV) (DCV) 1 14 Input Voltage (V) Input Voltage: 85-1V AC 6 Mounting B, C, D Mounting A 2 Mounting F PS5R-VG24 Operating Temperature ( C) 1 Mounting A Mounting E Mounting B Mounting C, D, F Operating Temperature ( C) PS5R-VA5, -VA12, -VA24, -VG24 (ACV) (DCV) 1 15 Input voltage (V) 37 Overcurrent Protection Characteristics PS5R-VA/VB/VC/VD/VF PS5R-VE24 PS5R-VG24 Voltage (%) and over Intermittent Operation Voltage (%) AC DC Intermittent Operation 1 11 and over Voltage (%) Input Voltage: 85-1V AC Mounting B, C, D, E, F Mounting A 8 Mounting E Mounting B, C, D, F Operating Temperature ( C) Intermittent Operation 1 15 and over

13 PS5R-V Series Operating Temperature Approved by Safety Standards Part umber U58, CSA C22.2 o.17.1, ASI/ISA , E695-1, E5178 Mounting A Mounting B Mounting C Mounting D Mounting E Mounting F PS5R-VA5, -VA12, -VA PS5R-VB5, -VB12, -VB PS5R-VC PS5R-VC PS5R-VD PS5R-VE PS5R-VF PS5R-VG Mounting A (Vertical, standard) Front Panel PS5R-VA Mounting B (Upright) PS5R-VB/VC PS5R-VD/ VE/VF IP UT 1-24 VAC O VR. ADJ O UTP UT IPUT 5/6Hz DC O VR. ADJ OUTPUT -V Mounting C (Right side up) +V PS5R-VG Mounting Style Mounting D (eft side up) Mounting E (Upside down) Mounting F (Downward) Marking ame Description, AC Input Terminal Voltage range: 85 to 264V AC/1 to 37V DC +V, -V VR.ADJ Accessories Panel Mounting Bracket 2 Applicable Switching Power Supply Part umber Remarks PS5R-VB PS9Z-5R1B PS5R-VC PS9Z-5R2B For side mounting PS5R-VD PS5R-VE PS9Z-5R1C PS5R-VF PS9Z-5R1E PS5R-VG PS9Z-6R1F PS9Z-6R2F For side mounting ote 2: Used when installing on a panel directly, PS5R-VA model does not require panel mounting bracket. DI Rail (35mm-wide) 1mm BD1 Aluminum End Clip Part umber B6 B8 Ground Terminal DC Terminals Voltage Adjustment Up Be sure to connect this terminal to a proper ground. +V: Positive output terminal -V: egative output terminal Allows adjustment within ±1%. (VE = ±5%) Turning clockwise increases the output voltage. Turning counterclockwise decreases the output voltage. DC O Operation Indicator (green) Illuminates when the output voltage is on. OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 177

14 PS5R-V Series Dimensions (mm) OI Touchscreens PCs PS5R-VA M3.5 7 Screw Terminal PS5R-VB/VC M3.5 Screw Terminal PS5R-VD/VE PS5R-VF Automation Software 79 8 PS5R-VG M3.5 Screw Terminal 5-M3.5 Screw Terminal MTBF* M3.5 Screw Terminal PS5R-VA: 1,15,H minimum Sensors Communication Barriers PS5R-VB: PS5R-VC: PS5R-VD: PS5R-VE: PS5R-VF: 9,H minimum 65,H minimum 45,H minimum 38,H minimum 35,H minimum MI-HDBK-217F2 (GB, 3 C) PS5R-VG: 29,H minimum *MTBF stands for Mean Time Between Failure, which is calculated according to statistical device failures, and indicates reliability of a device. It is the statistical representation of the likelihood of the unit to fail and does not necessarily represent the expected life of a product. * 3-Phase

15 PS5R-V Series Panel Mounting Bracket PS9Z-5R1B PS9Z-5R2B Side-mount PS9Z-5R1C PS9Z-5R1E PS9Z-6R1F PS9Z-6R2F Side-mount M4 or 4- ø 4.5 holes M4 or 4- ø 4.5 holes M4 or 2- ø 4.5 holes Mounting hole layout when installing on a panel directly 2-M4 or 2- ø 4.5 holes Mounting hole layout when installing on a panel directly 2-M4 or 2- ø 4.5 holes Mounting hole layout when installing on a panel directly 2-M4 or 2- ø 4.5 holes Mounting hole layout when installing on a panel directly Mounting hole layout when installing on a panel directly Mounting hole layout for side mounting 145 Front View Side View Front View Front View Front View Side View When installed on switching power supply Side View 28.8 Front View 19.8 Side View Side View 13.6 Side View Back View Mounting Screws (4 -M3 6 countersunk screws) OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 179

16 PS5R-V Series Automation Software PCs OI Touchscreens Safety Precautions The PS5R-V should be placed in a proper enclosure. It is designed to be used with general electrical equipment and industrial electric devices Do not use switching power supplies with electric equipment whose malfunction or inadvertent operation may damage the human body or life directly. Make sure that the input voltage and output current do not exceed the ratings. If the input voltage and output current exceed the ratings, electric shock, fire, or malfunction may occur. Do not touch the terminals of the switching power supply while input voltage is applied, otherwise electric shock may occur. Provide the final product with protection against malfunction or damage that may be caused by malfunction of the switching power supply. Operating temperatures should not exceed the ratings. Be sure to note the derating characteristics. If the operating temperature exceeds the ratings, electric shock, fire, or malfunction may occur. Blown fuses indicate that the internal circuits are damaged. Contact IDEC for repair. Do not just replace the fuse and reoperate, otherwise electric shock, fire, or malfunction may occur. Do not use the switching power supplies to charge rechargeable batteries. Do not overload or short-circuit the switching power supply for a long period of time, otherwise the internal elements may be damaged. Do not disassemble, repair, or modify the power supplies, otherwise the high voltage internal part may cause electric shock, fire, or malfunction. The fuse inside the PS5R-V switching power supply is for AC input. Use an external fuse for DC input. Operating Instructions otes for installation Do not close the top or bottom openings of the PS5R-V to allow for heat radiation by convection. When mounting multiple PS5R-V switching power supplies side by side, maintain a minimum of 1 mm clearance. Observe the derating curves in consideration of the ambient temperature. Mounting on DI Rails 1. Use a 35mm-wide DI rail. 2.Place the PS5R-V on the DI rail as shown with input terminal side up (➀), and press the PS5R-V towards the DI rail (➁). Make sure that the PS5R-V is installed firmly. 3. Use B6 end clips to ensure power supplies do not slide off the end of the DI rail. Use of B8 end clips is recommended when excessive vibration or shock is anticipated. Removal Insert a flat screwdriver into the slot in the clamp, and pull out until it clicks (➀). The lock mechanism is released and the PS5R-V can be removed (➁). When mounting the PS5R-V again, push in the latch first. Mounting Removal Clamp Installing a Panel Mounting Bracket Panel Mounting Bracket (PS9Z-5R1, PS9Z-6R1F) Tab Push in the latch to OCK position. Slot OCK atch Power Supply UOCK Install the tab on the panel mounting bracket into the slot on the power supply. Install the brackets as shown on the left. Ensure that the panel mounting bracket is locked by the latch. Sensors 1mm minimum OCK Communication Barriers When the derating voltage may exceed the recommended value, provide forced air-cooling. Make sure to wire the ground terminal correctly. For wiring, use wires of heat resistance of 6oC or higher (PS5R-VB: 8oC or higher). Use copper wire of the following sizes, according to the rated current. Terminal Wire Size (allowable current) Wire Type Input AWG 18 to 14 AWG18 to 14 (AWG18: 7A, AWG16: 1A, AWG14: 15A) Cross-Sectional are AWG18:.82mm 2, AWG16: 1.31mm 2, AWG14: 2.mm 2 Applicable crimp terminal (reference) ø3.6min. 6.6 max. 4 max. 5.5 min. Copper Solid/Stranded Recommended tightening torque of the input and output terminals is 1. to 1.3m (.8 m for U). Panel Mounting Bracket (PS9Z-5R2B) Tab atch OCK Power Supply Pull out the latch to UOCK position. OCK UOCK Insert the tab on the panel mounting bracket into the slot on the power supply. Push in the latch to OCK position. Ensure that the panel mounting bracket is locked by the latch

17 PS5R-V Series Installing PS9Z-6R2F Side-mount Panel Mounting Bracket Install the bracket on the switching power supply using four M3 6 countersunk screws supplied with the bracket. Recommended tightening torque is.5 to.6.m (should be in the center positions) Panel Mounting Bracket (PS9Z-5R1, PS9Z-6R1F) Tab Push in the latch to OCK position. Slot OCK atch atch OCK Power Supply Panel Mounting Bracket (PS9Z-5R2B) Tab Power Supply OCK UOCK UOCK Install the tab on the panel mounting bracket into the slot on the power supply. Install the brackets as shown on the left. Ensure that the panel mounting bracket is locked by the latch. Pull out the latch to UOCK position. Insert the tab on the panel mounting bracket into the slot on the power supply. Push in the latch to OCK position. Adjustment of Voltage Ensure that the panel mounting bracket is locked by the latch. OCK by using the VR.ADJ control on the front. Turning the VR.ADJ clockwise increases the The output voltage can be adjusted within ±1% (VE: ±5%) of the rated output voltage output voltage. Turning the VR.ADJ counterclockwise decreases the output voltage. Overcurrent Protection The output voltage drops automatically when an overcurrent flows due to an overload or short circuit. ormal voltage is auto matically restored when the load returns to normal conditions. Insulation/Dielectric Test When performing an insulation/dielectric test, short-circuit the input (between and ) and output (between +V and -V). Do not apply or interrupt the voltage quickly, otherwise surge voltages may be generated and the PS5R-V may be damaged. otes for Operation interruption may indicate blown fuses. Contact IDEC. The PS5R-V switching power supply contains an internal fuse for AC input. When using DC input, install an exter nal fuse. To avoid blown fuses, select a fuse in consideration of the rated current of the internal fuse. Rated Current of Internal Fuses Part umber PS5R-VB/VC PS5R-VD/VE/VF Internal FuseRated Current PS5R-VG 6.3A Avoid overload and short-circuit for a long period of time, oth erwise the internal elements may be damaged. DC input operation is not subject to safety standards. IDEC warranties the PS5R-V switching power supply for a period of five years from the date of shipment. Scope IDEC agrees to repair or replace the PS5R-V switching power supply if the product has been operated under the following conditions. The maximum value of output capacity is within the range shown in Operating Temperature vs. Current on page Average operating temperature (ambient temperature of switching power supply) is 4 C maximum. 2. The load is 8% maximum. 3. Input voltage is the rated input voltage. 4. Standard mounting style 2A 4A Rust and Scratches on Metal parts Bonded metal parts are used for the PS5R-V. Rust on the edge and scratches on the surfaces may be developed depending on the storage condition, but the performance of the PS5R-V is not affected. oise Small acoustic noise inside the PS5R-V may be heard depending on the input voltage and load, but the performance of the PS5R-V is not affected. Series Operation Series operation is allowed. Connect Schottky barrier diodes D as shown below. Select a Schottky diode in consideration of the rated current. The diode s reverse voltage must be higher than the PS5R-V s output voltage. (a) +V V +V V Parallel Operation oad oad (b) Parallel operation is not possible to increase the output capacity, because the internal elements and load may be damaged. Backup Operation Backup operation is a connection method of two switching power supplies in parallel for emergency. ormally one switching power supply has a sufficient output. If one switching power supply fails, another one operates to continue the output. Make sure that the sum of power consumption by load and diode is not greater than the rated wattage (rated voltage rated current) of one switching power supply. AC Warranty I I OUT OUT D D oad Select a diode in consideration of: Diode s current must be more than double the PS5R-V s output current. Take heat dissipation into consideration. IDEC shall not be liable for other damages including consequential, contingent or incidental damages. Warranty does not apply if the PS5R-V switching power supply was subject to: 1. Inappropriate handling, or operation beyond specifications. 2. Modification or repair by other than IDEC. 3. Failure caused by other than the PS5R-V switching power supply. 4. Failure caused by natural disasters. +V V +V V oad OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 181

18 PS5R Slim ine Series Barriers Communication Sensors Automation Software PCs OI Touchscreens PS5R Slim ine Series Switching Key features: ightweight and compact in size Wide power range: 1W-24W Universal input: 1W to 9W: V AC/1-37V DC 12W and 24W: V AC/1-35V DC Power Factor Correction for 6W to 24W (E61-3-2) Meets SEMI F47 Sag Immunity (12W & 24W only) U isted for Class 1, Div. 2 Hazardous ocations Overcurrent protection, auto-reset Overvoltage protection, shut down Spring-up screw terminal type, IP2 DI rail or panel surface mount Approvals: CE Marked ASI/ISA (Hazardous locations) TÜV E5178:1997 c-u, U58 VD: E695:2 U131 (PS5R-SB, -SC, -SD) EMC: Directive E6124-3:2 (EMI: Class B, EMS: Industrial) DC ow Indicator (15W, 12W & 24W Slim ine Only) The indicator turns on when the output voltage drops below 8% of the rated value. This assists in troubleshooting power supply problems. DC O Indicator The indicator turns on when the unit is powered up. This is a convenient way to know when the power supply is receiving power. Voltage Adjustment The output voltage can be easily adjusted within + 1% of the rated voltage. Fingersafe, Spring-up Screw Terminals Terminals are captive spring-up screws, which makes using them as easy as pushing a screw down and tightening it. They are shock and vibration resistant, and work with ring lugs, fork connectors or stripped wire connections. The terminals are rated IP2 (when tightened) meaning they are recessed to keep fingers and objects from touching the input contacts. Designed with Accessibility & Convenience in Mind Top View File #E (SEMI F47 12W & 24W only) Universal Input Power The applied input power has a range of V AC (1-35V DC) without the use of jumpers or slide switches. This makes IDEC power supplies suitable for use anywhere in the world. ong ife Expectancy IDEC power supplies are very reliable, with a life expectancy of 7, hrs. (minimum) or longer, depending on usage. Power factor correction has also been included to minimize harmonic distortion, resulting in a longer operating life and increased reliability. Channel With very low output ripples of less than 1% peak to peak, the 12W and 24W power supplies are some of the best in the industry. The output comes with overload protection that avoids damaging the power supply and the spring-up, fingersafe, screw terminals add a level of safety and ease for the user. The 24W power supply also has the convenience of two output terminals. Ventilation Grill Provides cooling for the power supply and prevents small objects from falling into the power supply circuitry

19 PS5R Slim ine Series Part umbers to 264V AC 5V DC 2.A PS5R-SB5 12V DC 1.2A PS5R-SB12 24V DC.65A PS5R-SB24 12V DC 2.5A PS5R-SC12 24V DC 1.3A PS5R-SC V DC 2.5A PS5R-SD24 Panel Mounting Bracket for PS5R-SB Style Accessories Panel Mounting Bracket for PS5R-SB (flat side mounting) Panel Mounting Bracket for PS5R-SC and PS5R-SD Panel Mounting Bracket for PS5R-SE Panel Mounting Bracket for PS5R-SF & PS5R-SG DI rail (1mm) DI rail end clip PS9Z-5R1B PS9Z-5R2B PS9Z-5R1C PS9Z-5R1E PS9Z-5R1G BD1 B5 Capacity 9 Input Voltage Voltage Rated Current Part umber 24V DC 3.75A PS5R-SE V DC 5A PS5R-SF24 85 to 264V AC 24 24V DC 1A PS5R-SG24 OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 183

20 PS5R Slim ine Series Specifications Barriers Communication Sensors Automation Software PCs OI Touchscreens Model 5V DC output PS5R-SB5 12V DC output PS5R-SB12 PS5R-SC12 24V DC output PS5R-SB24 PS5R-SC24 PS5R-SD24 PS5R-SE24 PS5R-SF24 PS5R-SG24 Capacity 15W (5V Model is 1W) 3W 6W 9W 12W 24W Input Input Voltage (single-phase, 2-wire) Input Current (maximum) 85 to 264V AC, 1 to 37V DC 85 to 264V AC, 1 to 35V DC 1VAC.45A.9A 1.7A 2.3A 1.8A 3.5A 2VAC.3A.6A 1.A 1.4A 1.A 1.7A Internal Fuse Rating 2A 3.15A 4A 6.3A Inrush Current (cold start) eakage Current (at no load) Typical Efficiency Current Ratings Voltage Adjustment Holding Time 132V AC:.38 ma maximum 264V AC:.75 ma maximum 5A maximum (at 2V AC).75mA maximum 1mA maximum 5V DC 69% 12V DC 75% 78% 24V DC 79% 8% 83% 82% 84% 5V DC 2.A 12V DC 1.2A 2.5A 24V DC.65A 1.3A 2.5A 3.75A 5A 1A ±1% (V. ADJ control on front) 2ms minimum (at rated input and output) Starting Time 2ms maximum 65ms maximum 5ms maximum Rise Time 1ms maximum (at rated input and output) 2ms maximum ine Regulation.4% maximum oad Regulation 1.5% maximum.8% max Temperature Regulation.5% degree C maximum Ripple Voltage 2% peak to peak maximum (including noise) 1% peak to peak maximum (including noise) Overcurrent Protection 15% or more, auto reset 15 to 13%, auto reset 13 to 11%, auto reset Overvoltage Protection Operation Indicator 12% min. SHUTDOW ED (green) Voltage ow Indication ED (amber) ED (amber) Dielectric Strength Insulation Resistance Between Input and Ground: 2 V AC, 1 minute Between input and output: 3V AC, 1 minute; Between output and ground: 5V AC, 1 minute. Between Input & Terminals: 1 MΩ Min Operating Temperature 1 to +65 C (14 to 149 F) -1 to 6 C (14 to 14 F) Storage Temperature Operating Humidity Vibration Resistance Shock Resistance Approvals -25 to 75 C (-13 to +167 F) 2 to 9% relative humidity (no condensation) Frequency 1 to 55Hz, Amplitude.375mm 3m/s 2 (3G) 3 times each in 6 axes EMC: E (EMI: Class B, EMS: Industrial), c-u (CSA 22.2 o. 14), ASI/ISA , U58, VD: E695, E5178 U131 Class 2, c-u (CSA 22.2 o. 213 and 223) SEMI F47 Harmonic Directive /A E A14 class A Weight (approx.) 16g 25g 285g 44g 63g 1g Terminal Screw IP protection M3.5 slotted-phillips head screw (screw terminal type) IP2 fingersafe Dimensions H x W x D (mm) 9 x 22.5 x x 36 x x 46 x x 5 x x 8 x Dimensions H x W x D (inches) 3.54 x.89 x x 1.42 x x 1.81 x x 1.97 x x 3.15 x For dimensions, see page

21 PS5R Slim ine Series All IDEC Slim ine power supplies are listed to U58, which allows operation at 1% capacity inside a panel. This eliminates the need to use oversize power supplies or utilize two power supplies derated at 5% of their rated output. PS5R-SB 1 Mounting A 9 8 Mounting B, C, D Operating Temperature ( C) Dearting curve for PS5R-SB varies depending on mounting method (see right). PS5R-SD, -SE, -SF Operating Temperature (ºC) Cuurent (%) 24 Mounting A (standard) Mounting C (left side up) Temperature Derating Curves Mounting B (upright) Mounting D (right side up) PS5R-SC The charts below show that the PS5R Slim 1W (at 6ºC) and 15W (at 6ºC), 3W/6W/9W (at 55ºC), 12W (at 4ºC), and 24W (at 45ºC) meet the elevated, operating temperature required by U58 and E695 standards to operate at an output current of 1%. The output current starts to derate beyond the required temperature Operating Temperature (ºC) Cuurent (%) PS5R-SG PS5R-SE 9W/3.75A/24V DC versus a eading Competitor Standard derating curve (operating temperature vs. output current) Don t Believe the Hype Currrent (A) Boost Rating 3.75A ormal Rating 2.5A eading Competitor 24V/2.5A Operating Temperature (ºC) Cuurent (%) Other companies use slick marketing to sell you 6W power supplies with a BOOST, but what they don t tell you is that these are merely 9W power supplies that have been renamed to fool you into thinking they have a unique feature. IDEC 9W power supplies are just what they claim, 9W power supplies. The truth is IDEC led the market by incorporating U58 DI rail mount power supplies as a standard product. Don t let the other guys pull a fast one on you by claiming to provide features that just aren t true, or even possible. See what IDEC has to offer, no strings attached. Overload Protection Overload protection prevents the power supply from being damaged when an overload occurs. There are two kinds of protection. Overcurrent Protection Overvoltage Protection Overcurrent Protection PS5R-SF, -SG Voltage Sag Sliding Scale PS5R-SF, -SG When the output current exceeds 15% of the rated current, overload protection is triggered, and the output voltage starts decreasing. When the output current returns within the rated range, the overload protection function is automatically cleared. Overvoltage Protection When the output voltage of the power supply rises to 12% or more of the rated value, the output will shut off. To restore power, only manual reset is available which is an advantage in troubleshooting. SEMI-F47 Approved The SEMI F47 (Semiconductor Processing Equipment Voltage Sag Immunity) defines the minimum voltage sag ride-through requirements for semiconductor processing, automated test equipment and other equipment. It requires that the equipment be able to tolerate voltage sags on an AC power line without interrupting operations. This avoids the loss of production and money. The graph shows how the equipment must tolerate sags to 5% for 2ms, sags to 7% for up to.5 seconds and sags to 8% for up to 1 second. OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 185

22 PS5R Slim ine Series Dimensions and Terminal Markings OI Touchscreens PS5R-SB Height Width Depth 9mm 22.5mm 95mm IPUT 1-24VAC PS5R-SC PS5R-SD Height Width Depth 95.mm 36.mm 18.mm IPUT 5/6Hz DC O PS5R-SE Height Width Depth 115.mm 46.mm 121.mm IPUT 5/6Hz DC O OW O VR. ADJ VR. ADJ VR. ADJ OUTPUT OUTPUT -V +V -V +V PCs OUTPUT Automation Software PS5R-SF PS5R-SG Height Width Depth 115.mm 5.mm 129.mm Height Width Depth 125. mm 8. mm mm Sensors Communication Barriers Front Panel (terminals) Markings ame Description V. ADJ Voltage adjustment Adjusts within ±1%; turn clockwise to increase output voltage. DC O Operation indicator Green ED is lit when output voltage is on. DC ow +V, V indicator DC output terminals Frame ground, Input terminals Amber ED is lit when output voltage drops below 8% of rated voltage. +V: Positive output Terminal V: egative output terminal Ground this terminal to reduce high-frequency noise caused by switching power supply. Accept a wide range of voltages and frequencies (no polarity at DC input)

23 PS5R Slim ine Series Mounting Bracket Dimensions (mm) PS9Z-5R1B (for PS5R-SB) PS9Z-5R2B (for PS5R-SB) PS9Z-5R1C (for PS5R-SC & PS5R-SD) PS9Z-5R1B M4 tapped holes or 2-ø4.5 through holes PS9Z-5R1E (for PS5R-SE) M4 tapped holes or 2-ø4.5 through holes (See the front page for mounting examples.) M4 Tapped Holes or 2-ø4.5 Drilled Holes PS9Z-5R2B PS9Z-5R1G (for PS5R-SF & PS5R-SG) M4 Tapped Holes or 4-ø4.5 Drilled Holes M4 Tapped Holes or 2-ø4.5 Drilled Holes OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 187

24 PS5R Standard Series OI Touchscreens PCs Automation Software Key features: Wide power range: 7.5W-48W Universal input : 7.5W-5W: V AC/15-37V DC 1W: V AC/17-264V AC 24-37V DC (selectable) 75W, 12W, 24W: V AC/11-35V DC 48W: 3 phase: V AC 3 phase: V AC Overcurrent/overvoltage protection Power Factor Correction (75W, 12W, 24W models) E E Voltage adjustment +1% Spring-up crew terminal, IP2 (finger-safe) DI rail or panel surface mount Approvals: CE marked U 58 isted c-u TÜV approved VD E695:2 EMC Directives: E581-2 E582-2 E PS5R Standard Series Switching Part umbers U 58 isted File #E Cert o. B V DC 1.5A PS5R-A5 12V DC.6A PS5R-A12 24V DC.3A PS5R-A24 Style Capacity 75 Input Voltage 85 to 264V AC Voltage Rated Current Part umber 24V DC 3.1A PS5R-Q24 5V DC 2.5A PS5R-B V DC 1.2A PS5R-B12 Sensors 85 to 264V AC 24V DC.6A PS5R-B V DC 4.2A PS5R-E24 12V DC 2.5A PS5R-C V DC 1.3A PS5R-C to 24V 24V DC 5A PS5R-F24 AC Communication 5 24V DC 2.1A PS5R-D V DC 1A PS5R-G24 Barriers to 575V AC (3 phase) 36 to 575V AC (2 phase) 24V DC 2A PS5R-TJ24*

25 PS5R Standard Series Specifications PS5R-A5 PS5R-B5* Model PS5R-A12 PS5R-B12 PS5R-C12 PS5R-A24 PS5R-B24 PS5R-C24 PS5R-D24 PS5R-Q24 PS5R-E24 PS5R-F24 PS5R-G24 PS5R-TJ24 Capacity 7.5W 15W 3W 5W 75W 1W 12W 24W 48W Input Input Voltage (singlephase, 2-wire) 1 to 24V AC nominal (85 to 264V AC), 5/6Hz (47 to 63Hz) 11 to 34V DC nominal (15 to 37V DC) 1 to 12V AC, 5/6Hz 2 to 24V AC, 5/6Hz (jumper selectable) 24 to 37V DC 2.5A at 1V AC 1.5A at 2V AC 1 to 24V AC, 5/6Hz, 11 to 34V DC.17A at.3a at.68a at 1V 1.15A at 1.1A at 1.8A at Input Current (typical) 4A at 1V AC 1V AC 1V AC AC 1V AC 1V AC 1V AC Internal Fuse Rating 2A 2A 3.15A 3.15A 3.15A 4A 4A 6.3A 7A maximum 5A maximum (at 7A maximum (at cold start at Inrush Current 5A maximum (at cold start at 2V AC) (at cold start at cold start at 2V 23V AC) 23V AC) AC) eakage Current (at no load) Typical Efficiency Overvoltage Protection Voltage and Current Ratings 5V, 1.5A 12V,.6A 24V,.3A 69% at 5V 75% at 12V 79% at 24V 5V, 2.5A 12V, 1.2A 24V,.6A.75mA maximum (6Hz, measured in conformance with U, CSA, VDE) 75% at 12V 75% at 24V 12V, 2.5A 24V, 1.3A 3 phase: 32 to 575V AC 2 phase: 36 to 575V AC 3 x 1.1A 3 x.8a 79% at 24V 83% at 24V 85% at 24V 83% at 24V 91% s turns off at 15% (typical) 21A na <3.5ml 24V, 2.1A 24V, 3.1A 24V, 4.2A 24V, 5A 24V, 1A 24V, 2A Voltage Adjustments ±1% (V.ADJ screw on top) Holding Time 2ms minimum (at full rated input and output) 1ms typical Rise Time 2ms maximum (at full rated input and output) 15ms max.? ine Regulation.4% maximum 1.% max oad Regulation 1.5% maximum 2.% max Fluctuation due to Ambient Temperature Change.5% maximum Ripple Voltage 2% peak to peak maximum (including noise) < 1mVpp Overload Protection 12% typical (Zener-limiting) 12% typical, auto reset 125% typical, auto reset Operation Indicator ED (green) Parallel Operation PS5R-A PS5R-B PS5R-C PS5R-D PS5R-Q PS5R-E PS5R-F PS5R-G Allowed o Yes o Yes Yes Between input and output terminals: 3,V AC, 1 minute Dielectric Strength Between input terminals and housing: 2,V AC, 1 minute Between output terminal and housing: 5V AC, 1 minute Insulation Resistance Between input and output terminals/input terminals and housing: 1MΩ minimum (5V DC megger) 2kV AC, 5V DG Operating Temperature 1 to +6 C (14 to 14 F) (see derating curves) -25 to +7 C Storage Temperature 3 to +85 C (-22 to 185 F) -4 to +85 C Operating Humidity 2 to 9% relative humidity (no condensation) 95% max (at 25 C, no condensation) <15Hz amplitude +/- 2.5mm in Vibration Resistance 45m/s 2, 1 to 55Hz, 2 hours on each of 3 axes 1 to 5Hz,.75mm p-p, 2 hrs on each of 3 axes accordance with IEC to 15Hz, 2.3g, 9 min. 3g in all Shock Resistance 3m/s 2 (3G), 3 shocks in each of 6 directions directions in accordance with IEC Approvals Conforms to EMC Directives E581-2 & E VD Directive E6529 Certified to E695. U58 listed. c-u, TUV approved. CE marked. E Weight 15g 17g 36g 39g 8g 6g 12g 2g 2g Termination Spring-up, fingersafe terminals with captive M3.5 screws IP protection IP2 (finger safe) Dimensions H x W x D (mm) 75 x 45 x 7 75 x 45 x95 75 x 9 x x 9 x x 85 x x 145 x x 115 x14 12 x 2x x 115 x Dimensions H x W x D (inches) 2.95 x 1.77 x x 3.54 x 2.95 x x 3.35 x 4.72 x 4.53 x 4.72 x 7.87 x 2.95 x 1.77 x x 5.71 x x x 4.53 x For dimensions, see page For usage instructions, see page *12.5W for 5VDC model. OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 189

26 PS5R Standard Series Temperature Derating Curves OI Touchscreens PS5R-A/B Mounting style B Mounting style A PS5R-C/D Mounting style B Mounting style A PCs Operating Temperature (C) Operating Temperature (C) Automation Software PS5R-E Mounting style B Mounting style A Operating Temperature ( C) PS5R-Q Operating Temperature (C) Mounting style B Mouting style A PS5R-F/G Mounting Style B Mounting Style A PS5R-TJ Communication Sensors Operating Temperature (C) Current (A) I w Ambient Temperature (C) A Mounting (standard) B Mounting (Facing Upward) Barriers Vertical Vertical

27 PS5R Standard Series Part umbers: PS5R Accessories Accessories Appearance Description Part umber DI rail (1mm) DI rail end clip BD1 B5 Installation Instructions Time-Saving Spring-up Terminals The innovative terminals on the PS5R series use a spring-loaded screw. This makes installation as easy as pushing down and turning with a screwdriver. Installation time is cut in half since the screws do not need to be backed out to install wiring. The screws are held captive once installed and are 1% finger-safe. Screw terminals accept bare wire or ring or fork connectors. 1. Insert the wire connector into the slot on the side of the power supply. 2. Using a flat head or Phillips screwdriver, push down and turn the screw. The wire is now connected, and the screw terminal is fingersafe! Front Panel (terminals) V. ADJ DC O +V, V, C Voltage adjustment Operation indicator DC output terminals Frame ground Input terminals o connection Adjusts within ±1%; turn clockwise to increase output voltage Green ED is lit when output voltage is on +V: Positive output Terminal V: egative output terminal Ground this terminal to reduce high-frequency currents caused by switching Accept a wide range of voltages and frequencies (no polarity at DC input) Do not insert wires here, as this may damage the power supply + - Overcurrent Protection Characteristics Voltage (%) Voltage (%) 1 PS5R-A/B PS5R PS5R PS5R PS5R PS5R PS5R-C/D/E Parallel Operation TERMIAS EECTRICA OAD 1. Parallel operation only recommended for PS5R-Q24, PS5R-F24 and PS5R-G Factory recommended diode ST Microelectronics BYV54V-5, BYV54V-1, BYV54V-2, BYV541V-2 or with equivalent electrical specifications. 3. Using the voltage adjustment make sure out-voltage is the same for all power supplies. OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 191

28 PS5R Standard Series Dimensions OI Touchscreens PS5R-A (7.5W) PS5R-B (15W) PS5R-C (3W) M3.5 Terminal Screws M3.5 Terminal Screws 1-ø6.5 4-ø DC O V.ADJ DC O V.ADJ 75 DC O V.ADJ Sensors PCs 6 75 R ø R ø M3.5 Terminal Screws 12 5 PS5R-D (5W) PS5R-Q (75W) PS5R-F (12W) Automation Software 1-ø6.5 4-ø4.5 DC O M3.5 Terminal Screws M3.5 Terminal Screws V.ADJ M3.5 Terminal Screws PS5R-E (1W) 4-ø4.5 PS5R-G (24W) M3.5 Terminal Screws 4-ø PS5R-TJ ø M3.5 Terminal Screws 2-24V 4-ø4.5 4-ø Terminal Markings Communication PS5R-A/B PS5R-C/D/Q/F/G PS5R-E C -V +V C V +V V +V DC O V.ADJ DC O V.ADJ DC O V.ADJ 1w-OUTPUT Barriers IPUT C IPUT C IPUT VOTAGE SEECT 2-24V 1-12V 2-24V

29 PS3X Key features: Compact size Universal AC input voltage 5V, 12V and 24V DC outputs Available with mounting brackets for direct or DI rail mounting Overcurrent/overvoltage protection EMC, E5522 Class B compliant U/c-U recognized, TUV Power Supply Style Capacity 15W 25W 5W 75W 1W Capacity B: 15W C: 25W D: 5W Q: 75W E: 1W Voltage 5: 5V DC (15W, 25W, 75W, 1W) 12: 12V DC 24: 24V DC Part umber PS3X-B5AFC PS3X-B12AFC PS3X-B24AFC PS3X-C5AFC PS3X-C12AFC PS3X-C24AFC PS3X-D12AFG PS3X-D24AFG PS3X-Q5AFG PS3X-Q12AFG PS3X-Q24AFG PS3X-E5AFG PS3X-E12AFG PS3X-E24AFG Input Voltage 1 to 24V AC Part umber Configuration PS3X - B 5 AF C Voltage 5V 12V 24V 5V 12V 24V 12V 24V 5V 12V 24V 5V 12V 24V PS3X Series Part umbers Current 3.A 1.3A.63A 5.A 2.1A 1.1A 4.2A 2.2A 12.A 6.A 3.2A 16.A 8.5A 4.5A Cover and Terminal Style C: w/standard cover, Horizontal terminal block (PS3X-B/C models) G: w/standard cover, Vertical terminal block (PS3X-D/Q/E models) Input Voltage AF: 1 to 24V AC -shaped Mounting Bracket (optional) Applicable Power Supply Part umber PS3X-B PS9Z-33A PS3X-C PS9Z-33B PS3X-D PS9Z-3E3B PS3X-Q PS3X-E PS9Z-33E DI-rail Mounting Bracket (optional) Applicable Power Supply Part umber PS3X-B PS3X-C PS9Z-34B PS3X-D PS9Z-3E4C PS3X-Q PS3X-E PS9Z-3E4D DI Rail Appearance Part umber ength Material Weight (g) End Clips BD1 1mm Aluminum 2 Appearance Part umber Description B5 B6 small DI rail end clip medium DI rail end clip (the B6 has a higher profile than B5) OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 193

Switching Power Supplies

Switching Power Supplies Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel

More information

Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.

Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs. Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module

More information

Switching Power Supplies

Switching Power Supplies Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel

More information

PS6R 480W Switching Power Supply

PS6R 480W Switching Power Supply ew Series PS6R 4W Switching Power Supply Reduced size and high efficiency cuts operating costs. Energy-saving 93% Efficiency Space-saving 85mm wide Efficiency (%) 96 94 92 88 86 84 82 Competitor A Competitor

More information

Power Supplies. Automation & Sensing. Selection Guide

Power Supplies. Automation & Sensing. Selection Guide Automation & Sensing Selection Guide... 14 PS5R Slim Line Series... 141 Part Numbers... 142 Specifications... 143 Dimensions and Terminal Markings... 145 PS5R Standard Series... 147 Part Numbers... 147

More information

PS5R-S. Switching Power Supplies

PS5R-S. Switching Power Supplies TREICHL-ATM Electronic Auf der Bült 1-12 D 41189 Mönchengladbach Tel. 2166 8545 Fax 2166 8547 email: atm@treichl.de internet: www.atm-treichl.de PS5R-S Switching Power Supplies Class Create More Space

More information

Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies

Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:

More information

Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Part Numbers

Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Part Numbers Standard Series Key features: Wide power range: 7.W-4W Universal input : 7.W-W: 8-264V /1-37V DC W: 8-2V /17-264V 24-37V DC (selectable) W, W, 24W: 8-264V /11-3V DC 4W: 3 phase: 32- V 3 phase: 3- V Overcurrent/overvoltage

More information

22mm XW E-Stops. UL File #E68961 CCC No Specifications

22mm XW E-Stops. UL File #E68961 CCC No Specifications XW Series 22mm XW E-Stops Key features: The depth behind the panel is only 48.7 mm for 1 to 4 contacts (with terminal cover) for illuminated and non-illuminated units. IDEC s original Safe break action

More information

22mm XW E-Stops. IEC , EN , JIS C , UL508, UL991, NFPA79, CSA C22.2 No. 14, GB

22mm XW E-Stops. IEC , EN , JIS C , UL508, UL991, NFPA79, CSA C22.2 No. 14, GB ø22mm XW E-Stops Circuit Breakers Terminal Blocks ors Timers elays & Sockets Signaling ights 22mm XW E-Stops Key features: The depth behind the panel can be as little as 46.4 mm for 1 to 4 contacts (with

More information

LS200 Series Instruction Manual

LS200 Series Instruction Manual LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit

More information

DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power

DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS

More information

DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS

More information

Ordering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES

Ordering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak

More information

DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power

DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW

More information

DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND

More information

DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power

DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT

More information

Switches & Pilot Devices

Switches & Pilot Devices Key features: Two button sizes: ø29 and ø4mm ead-free, ohs compliant, (EU directive 22/95/EC) Depth behind the panel: Standard - only 27.9mm for 1 to 4 contacts Unibody - only 23.9mm for 1NC or 2NC IDEC

More information

ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating

ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to

More information

XW Series E-Stops. Safety. Selection Guide ø22mm XW E-Stops

XW Series E-Stops. Safety.  Selection Guide ø22mm XW E-Stops Safety Selection Guide... 288 ø22mm XW E-Stops... 289 www.idec.com/usa/estop XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Table

More information

Relays & Sockets. RQ Series PCB Relays

Relays & Sockets. RQ Series PCB Relays RQ RQ Series PCB Relays IDEC RQ relays are low-profile, PCB relays in a compact package. Size equals value. RQ relays are small, yet maintain high contact ratings and long operational life. For larger

More information

Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions...

Circuit Breakers. Switching & Controls.  Selection Guide NC1V Series Dimensions... Switching & ontrols Selection Guide... 1028 1V Series... 1029 Dimensions... 1035 www.ide.com/circuitbreaker ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage

More information

Electronic Circuit Breaker ESS20-0..

Electronic Circuit Breaker ESS20-0.. Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode

More information

S8VK-S (30/60/120/240/480-W Models)

S8VK-S (30/60/120/240/480-W Models) New Product Switch Mode Power Supply S8VK-S (3/6/1/2/48-W Models) A Perfect Fit for Small Control Panels Coated PCBs for Better Resistance to Environment Connections for Easy Wiring Operation possible

More information

Power Supplies. SDN-C Compact DIN Rail Series

Power Supplies. SDN-C Compact DIN Rail Series SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high effi ciency and compact size with new visual diagnostic LEDs

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage

More information

D R C- 4 0 s e r i e s

D R C- 4 0 s e r i e s LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /

More information

Switching Power Supply

Switching Power Supply Switching Power Supply Easy-to-use Industrial Power Supply with Versatile Functions (); Power Supply Suitable for Peak Loads such as Motors and Solenoids (-P) Remote control function incorporated. Remote

More information

Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions Accessories

Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions Accessories Switching & ontrols Selection Guide... 922 1V Series... 923 Dimensions... 929 Accessories... 932 ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks

More information

<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost

<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost SERIES Board type, ultra-small size, and low cost Ordering Information Switching power supplies General Description 2. Allowable Input Voltage Range AC85

More information

MD60 Series 60W DINergy Power Supply

MD60 Series 60W DINergy Power Supply MD60 Series 60W DINergy Power Supply Features Compact size, high efficiency and DIN Rail mounting 60 C rated provides full power/no derating required 100-240VAC wide-range auto-selection input Overcurrent,

More information

DRB-1 Series Instruction Manual

DRB-1 Series Instruction Manual Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.

More information

Power ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase

Power ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide

More information

DC (on) LED Signal. Multiple output connector for easy wiring

DC (on) LED Signal. Multiple output connector for easy wiring DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage

More information

Rated load current (resistive load) SRP. Min. 0.9 (max. 25 of difference between voltage phase and current phase)

Rated load current (resistive load) SRP. Min. 0.9 (max. 25 of difference between voltage phase and current phase) SRPH1 Series Single Phase, Analog Input Type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC

More information

Features. Description. Table of Contents

Features. Description. Table of Contents Features Very low profile Very high efficiency (typically 90%) Single and dual output versions Input voltages from 24V to 110VDC nominal voltages from 5V to 48VDC -40 C to +71 C operation without de-rating

More information

Model Number Structure

Model Number Structure Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved

More information

POWER-WIN TECHNOLOGY CORP.

POWER-WIN TECHNOLOGY CORP. FEATURES Medical 60601-1 3.1 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power BASIC 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60

More information

(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency

(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency SERIES (DC/DC) "TESLA Converter" (next-generation power supply) adopted : ultra small size and super high efficiency.chassis module/open-frame type Super high efficiency 94.5 to 96.5% (typical) Ordering

More information

PRO POWER 2 0 A L I T H I U M B AT T E RY C H A R G E R M O D E L : P P - L B C V E R S I O N : V 1. 0

PRO POWER 2 0 A L I T H I U M B AT T E RY C H A R G E R M O D E L : P P - L B C V E R S I O N : V 1. 0 PRO POWER 2 0 A L I T H I U M B AT T E RY C H AR G E R M O D E L : P P - L B C - 1 2 2 0 V E R S I O N : V 1. 0 Contents 1. Revised History... 1 2. Warning... 1 3. Notes... 1 4. Product Number System...

More information

Insulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit

Insulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,

More information

Switching Power Supply

Switching Power Supply Switching Power Supply Miniature DIN-track Mounting DC-DC Power Supplies 3- and 7.5-W models. Inputs: 10 to 27 VDC (DC input) Outputs: 5, 12, 15, 24, ±12, and ±15 V. 65 mm depth enables mounting onto panels

More information

DIN Rail Power Supplies

DIN Rail Power Supplies DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced

More information

350W Slim Type with PFC Switching Power Supply

350W Slim Type with PFC Switching Power Supply Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 350W Slim Type with PFC Switching Power Supply S&E GB4943 UL950-1 EN950-1 EN335-1 IEC950-1 % - ~+ Industrial automation machinery

More information

NRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute

NRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute RA Series RA Series Key features of the RA series include: Available in 5 different styles Excellent overload and short circuit protection Small size and high-efficiency Life expectancy of over 0,000 operations

More information

RU Series Universal Relays

RU Series Universal Relays Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal

More information

Section. Circuit Breakers Selection Guide...N-2. NRA Series...N-3. NRBM Series...N-13. NRC Series...

Section. Circuit Breakers   Selection Guide...N-2. NRA Series...N-3. NRBM Series...N-13. NRC Series... Section Selection Guide...-2 RA Series...-3 RBM Series...-3 RC Series...-20 General Instructions...-29 Internal Circuit Overview...-29 for more information on this product family visit www.idec.com/circuitbreaker

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled BASIC MH/iFePO4 90 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC ow profile

More information

Industrial Power Supplies

Industrial Power Supplies , Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled BASIC MH/iFePO4 250 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 50 250 V ow profile casing (21 x 30 mm cross-section)

More information

XW Series E-Stops. Safety. ø22mm XW E-Stops Phone: Fax: Web: -

XW Series E-Stops. Safety. ø22mm XW E-Stops Phone: Fax: Web:  - Safety ø22mm XW E-Stops... 277 XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Phone: 8.894.412 - Fax: 888.723.4773 - Web: www.clrwtr.com

More information

Power ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase

Power ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled EM converter EM converter BASIC MH/iFePO4 250 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 50 250 V ow profile casing

More information

INDUSTRIAL POWER SUPPLIES SFL-SERIES

INDUSTRIAL POWER SUPPLIES SFL-SERIES INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled EM converter EM converter BASIC icd/imh 250 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 50 250 V ow

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled EM converter EM converter BASIC icd 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 54 V SEV for

More information

Switch Mode Power Supply S8VS

Switch Mode Power Supply S8VS Switch Mode Power Supply S8VS Monitor Functions for Replacement Timing and Total Run Time in a Compact Size. 180-W Models added to the series. Compact size (40 (W) 95 (H) mm) (60-W Models) Large 3-digit,

More information

Emergency lighting units EM powerled. EM powerled BASIC 4W Emergency lighting LED Driver

Emergency lighting units EM powerled. EM powerled BASIC 4W Emergency lighting LED Driver BASIC 4W Emergency lighting Driver Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60 V DC ow profile casing (21 x 30 mm

More information

FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT

FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT NC NC RELAYS Flat type Flat type (PC board) (PC board) FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic design achieves 10.9

More information

UHP-500 series. 500W Slim Type with PFC Switching Supply

UHP-500 series. 500W Slim Type with PFC Switching Supply Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 500W Slim Type with PFC Switching Supply S&E GB4943 UL950- EN950- IEC950- % - ~+ Industrial automation machinery Industrial

More information

G3PE-Single-phase. Solid State Relays for Heaters

G3PE-Single-phase. Solid State Relays for Heaters Solid State Relays for Heaters Single-phase CSM_Single-phase_DS_E Compact, Slim-profile SSRs with Heat Sinks. s with No Zero Cross for a Wide Range of Applications. RoHS compliant. s also available with

More information

Relays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada

Relays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power

More information

Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility

Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.

More information

PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.

PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ. 0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:

More information

Oiltight Switches & Pilot Devices

Oiltight Switches & Pilot Devices Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*

More information

Emergency lighting units EM converterled. EM converterled BASIC 90 V BASIC series

Emergency lighting units EM converterled. EM converterled BASIC 90 V BASIC series BASIC 90 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC ow profile

More information

Model Number Structure

Model Number Structure Solid State Relays Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking

More information

(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2

(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2 Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.

More information

XA Series Emergency Stop Switches (w/removable Contact Block)

XA Series Emergency Stop Switches (w/removable Contact Block) XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.

More information

DRL-1 Series Instruction Manual

DRL-1 Series Instruction Manual DRL-1 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit

More information

GB60S 60W Single Output General Purpose Series

GB60S 60W Single Output General Purpose Series Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency

More information

Emergency lighting units EM converterled. EM converterled ST 50 V SELFTEST series

Emergency lighting units EM converterled. EM converterled ST 50 V SELFTEST series ST 50 V SEFTEST series Product description lighting Driver with self-test function For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output voltage < 60 V DC ow

More information

RWS50B RWS100B RWS150B RWS300B RWS600B

RWS50B RWS100B RWS150B RWS300B RWS600B RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership

More information

Emergency lighting units EM converterled. EM converterled BASIC 50 V BASIC series

Emergency lighting units EM converterled. EM converterled BASIC 50 V BASIC series BASIC 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output voltage < 60 V DC ow profile

More information

Model Number Structure

Model Number Structure Solid State Relays CSM DS_E_2_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible

More information

Model Number Structure

Model Number Structure Solid State Relays CSM OEE_DS_E_1_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting

More information

DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES

DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36

More information

Switching Power Supplies

Switching Power Supplies , 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals

More information

ZWD225PAF Series Instruction Manual

ZWD225PAF Series Instruction Manual Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard.

More information

Emergency lighting units EM converterled. EM converterled BASIC 200 V BASIC series

Emergency lighting units EM converterled. EM converterled BASIC 200 V BASIC series EM converter EM converter BASIC 200 V BASIC series Product description lighting Driver for manual testing For modules with a forward voltage of 50 200 V ow profile casing (21 x 30 mm cross-section) For

More information

ZWD100PAF. Conformity to RoHS Directive

ZWD100PAF. Conformity to RoHS Directive -SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average

More information

XW Series Emergency Stop Switches

XW Series Emergency Stop Switches ø ø mm, 4-contact Emergency Stop Switch. Compact size only 37. mm deep behind the panel (screw terminal type 4 mm with terminal cover). eliable Safe break action. The depth behind the panel is only 37.

More information

0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)

0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h) Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and

More information

Emergency lighting units EM converterled. EM converterled ST 90 V SELFTEST series

Emergency lighting units EM converterled. EM converterled ST 90 V SELFTEST series ST 90 V SEFTEST series Product description lighting Driver with self-test function For self-contained emergency lighting For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC

More information

A22NK. Key-type Selector Switches

A22NK. Key-type Selector Switches Key-type Selector Switches -mm dia. Key-type Selector Switches Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy

More information

AC/DC Converter MBP250-2A13D13M

AC/DC Converter MBP250-2A13D13M 250W, 165-264VAC Input, Dual output AC/DC battery charging module power supply FEATURES Low stand-by power consumption, Maximum instantaneous power up to 350W With charging function, the 12V output Lead-acid

More information

Sorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V

Sorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V Sorensen XG Series / XTR Series 670 850 W 850 W, 1U Half Rack Programmable DC Power Supplies 6 600 V Highest Power Density Comprehensive Digital and Analog Interface Options Scalable, Multi-Unit Design

More information

Features. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter

Features. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation

More information

韩国 Autonics 进口固态继电器型号模拟固态继电器 SRPH1 SRPH1 Series SSR 比例控制继电器选型说明书 pdf Single phase, Analog input type SSR Features Power control/ Cycle control/phase c

韩国 Autonics 进口固态继电器型号模拟固态继电器 SRPH1 SRPH1 Series SSR 比例控制继电器选型说明书 pdf Single phase, Analog input type SSR Features Power control/ Cycle control/phase c Series Single phase, Analog input type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC

More information

DC9~ typ max 40max 80max. 71 typ max. 120max 120max. 120max. 120max. 60max. 48max. 20max

DC9~ typ max 40max 80max. 71 typ max. 120max 120max. 120max. 120max. 60max. 48max. 20max ZU SERIES DC/DC CONVERTER ZUS1R R Thin profile Isolated between input-output Built-in overcurrent protection circuit UL recognized, TÜV approved, CSA certified Five-year warranty ORDERING INFORMATION ZUS1R120

More information

Models. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery

Models. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery AC/DC Battery Controller Power Supply TSPC-240UPS Series Compact universal 24 VDC power supply with integrated battery controller module Battery protection for over voltage, deep discharge, short circuit

More information

POWER-WIN TECHNOLOGY CORP.

POWER-WIN TECHNOLOGY CORP. atts Dual to Quad Output FEATURES Build-in active PFC function, PF > 0.9 Compact design for multiple outputs Dual to Quad output, Flexible DC output combination from 3.3V to 48V 2 year warranty ELECTRICAL

More information

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off

More information

Open Frame Power Supplies

Open Frame Power Supplies , 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and

More information

UHP-350 series. 350W Slim Type with PFC Switching Power Supply

UHP-350 series. 350W Slim Type with PFC Switching Power Supply Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 50W Slim Type with PFC Switching Power Supply GB494 UL950-1 EN950-1 EN5-1 IEC950-1 - ~ Industrial automation machinery Industrial

More information

PRODUCTS: POWER SUPPLY

PRODUCTS: POWER SUPPLY PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER

More information

MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models

MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)

More information

Document: PRODSPEC-140 Revision: G DCN No Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger

Document: PRODSPEC-140 Revision: G DCN No Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger Document: PRODSPEC-140 Revision: G DCN No. 106512 Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger 1. GENERAL DESCRIPTION 1.1 General Description Fully regulated, constant voltage,

More information