WHEEL FITMENT EXPLAINED
|
|
- Madison Dalton
- 6 years ago
- Views:
Transcription
1 WHEEL FITMENT EXPLAINED Bolt Pattern The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm. The diagram indicates the proper measuring methods for both 4 & 5 lug patterns. 6 lug wheels are measured like the 4 lug wheels. Conversion Table Inches - Millimeters 4 x x x x x x x x x x x x x x x x x x x x x x x x x x 130 FTO Stud Pattern 5 x 114.3mm Centerbore The centerbore of a wheel is the size of the machined hole on the back of the wheel that centers the wheel properly on the hub of the car. This hole is machined to exactly match the hub so the wheels are precisely positioned, minimizing the chance of a vibration. With a hubcentric wheel, the lug hardware will not be supporting the weight of the vehicle, all they really do is press the wheel against the hub of the car. Some wheels use high quality, forged centering rings that lock into place in the back of the wheel. This is an acceptable alternative.
2 If you have non-hubcentric (lugcentric) wheels, they should be torqued correctly while the vehicle is still off of the ground so they center properly. The weight of the vehicle can push the wheel off-center slightly while you're tightening them down if left on the ground. FTO Centerbore 67.1mm Offset The offset of a wheel is the distance from its hub mounting surface to the centerline of the wheel. The offset can be one of three types. Zero Offset The hub mounting surface is even with the centerline of the wheel. Positive The hub mounting surface is toward the front or wheel side of the wheel. Positive offset wheels are generally found on front wheel drive cars and newer rear drive cars. Negative The hub mounting surface is toward the back or brake side of the wheels centerline. "Deep dish" wheels are typically a negative offset. If the offset of the wheel is not correct for the car, the handling can be adversely affected. When the width of the wheel changes, the offset also changes numerically. If the offset were to stay the same while you added width, the additional width would be split evenly between the inside and outside. For most cars, this won't work correctly and only a select number of fitments will work for your vehicle.
3 FTO Wheel offsets These are not 100% accurate, but pretty good guideline. Width 6.5 Offset +20mm to +50mm Width 7.0 Offset +25mm to +45mm Width 7.5 Offset +30mm to +39mm Width 8.0 Offset +35mm Standard FTO offset 38mm Proper Lug Nuts or Lug Bolts While many aftermarket alloy wheels are designed to use your carã â â s original lug nuts or bolts, others require new hardware. It may be something as critical as differences in the wheelã â â s lug seat design as shown below, or something as simple as shorter lug heads to allow the wheelã â â s center caps to fit. If your new wheels require new hardware, ask your supplier for the appropriate lug nuts or lug bolts and it's worth taking note of the the size, pitch, seat design, length and the appropriate lug wrench socket size, i case you need to replace them at a later date. NOTE: Keep a set of your vehicles original lug nuts or bolts in the trunk just in case you ever need to use your spare tire.
4 Wheel Lug Nuts Torque IMPORTANT! Proper installation requires that the wheel lug torque be set to the recommended specification for your vehicle. These torque specifications can be found in your vehicles shop manual or obtained from your vehicle dealer. Finish tightening the lugs down with an accurate torque wrench. Use a crisscross sequence (shown below) until they have reached their proper torque value. Be careful because if you over torque a wheel, you can strip a lug nut, stretch or break a wheel stud, and cause the wheel, brake rotor and/or brake drum to distort. NOTE: When installing new wheels you should re-torque them after traveling the first 50 to 100 miles. This is necessary because as the wheels are breaking in they may compress slightly allowing their lugs to lose some of their torque. Simply repeat the same torque procedure listed above. Rim & Tyre Sizes 16x6.5" - 205x50R16 **Standard 16" GPX Wheel 17x7" - 205x40R17, 215x40R17(offers more rim protection) 17x7.5" - 215x40R17 17x8" - 235x40R17 *** 225x45R17 ARE THE WRONG SIZE *** 18x8" - 225x35R18 Speed(mph) difference between tyre sizes. 205x50R16 = 70 mph **Standard 16" GPX Wheel 205x40R17 = mph 215x40R17 = mph 235x40R17 = mph 225x35R18 = mph If you use the tyres as suggested above with your rims then you should not have any trouble with the tyres rubbing in the arches. Tyre Pressures
5 As a general rule for every 1" increase in rim size I would add 1-2 PSI to the standard tyre pressures... 16's - 32F 29R *** Standard GPX Alloy *** 17's - 32F 29R 18's - 32F 29R Tyre pressures have been a long debated subject, there is still no deffinative answer, so if you are unsure always use standard factory pressures, then check the wear pattern regularly, and adjust where nessasary. The Big Picture This will show you all the dimensions at work.
STEERING AND SUSPENSION SYSTEMS
STEERING AND SUSPENSION SYSTEMS UNIT 12: WHEEL AND TIRE DESIGN LESSON 1: WHEEL DESIGN I. Basic wheel construction A. Wheels are made from stamped steel or cast or forged aluminum or alloys. B. A wheel
More informationNATIONAL CODE OF PRACTICE
NATIONAL CODE OF PRACTICE VEHICLE STANDARDS BULLETIN 14 TRACK WIDTH & WHEEL WIDTH: OVERALL TYRE DIAMETER & WHEEL WIDTH: Simple Tyre Size Calculators are Available (see below) Step 1 - Original Tyre Size
More informationMaximum Motorsports Camber Caster Plates (05-10):
Maximum Motorsports Camber Caster Plates (05-10): Tools Required: Lug Wrench 21mm Deep Socket 18mm Deep Socket 15mm Deep Socket 17mm Socket 13mm Socket 10mm Socket Torque Wrench (requires 166lb-ft capacity
More informationSignature Series A/F/X Body GM Installation Instructions Rear Disc Conversion
Signature Series A/F/X Body GM Installation Instructions Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes
More informationALLOY WHEEL. Installation Instructions PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING WHEELS
ALLOY Installation Instructions PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING S Failure to comply with these instructions can cause serious injury or death to the installer or occupants of the vehicle.
More informationWheel Spacer. center bore thin spacer. brake rotor and hub. raised hub. thicker spacer. Page - 1
Wheel Spacer center bore thin spacer Things you need to do: 1) Select the correct spacer. Pick spacers that match your bolt pattern. Then use our online video to help you select the correct spacer thickness.
More informationALLOY WHEEL. Installation Instructions PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING WHEELS
ALLOY Installation Instructions PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING S Failure to comply with these instructions can cause serious injury or death to the installer or occupants of the vehicle.
More informationINSTALLATION OF ROAD WHEELS AND TIRES 2008 Ford F-250/F-350 4x2
INSTALLATION OF ROAD WHEELS AND TIRES 2008 Ford F-250/F-350 4x2 SAFETY PRECAUTIONS If any installation problems are encountered, please call G&B Specialties Inc. for technical assistance before continuing
More information"Bolt In" Axle Shaft Ordering Defined
Rear end Type This is simply the make and model of the rear end you are working on. Examples of this are Ford 9", Mopar 8 3/4, Dana 60, 12 bolt GM, etc... AL - Right or Left: (Axle Flange to End of Spline)
More informationJK 8 Lug Front Locking Hub Conversion Kit
JK 8 Lug Front Locking Hub Conversion Kit Kit #3034411 w/ Performance Rotors Kit #3034410 w/ Performance Slotted Rotors Kit #3034412 w/ Big Brake Kit Kit #3034413 w/ Big Brake Kit and Slotted Rotors Important
More informationInstallation Instructions
Instructions Created by an: 2007-Present Toyota Tundra LRT Leveling Lift Kit - 4WD by Low Range Off-Road (SKU# LR-LRTundra) Instructions also apply to 2WD Kits. Installation Instructions Revised 7-11-17
More informationInstallation Guide Currie Electro-Drive Conversion Kits 2, 3, & 4
Installation Guide Currie Electro-Drive Conversion Kits 2, 3, & 4 1 Before you start... Use this information to determine whether one of our kits will fit your bike Drawing Ref. Fork Area Leg clearance
More informationHow to install Front Brake Pads on your GT, V6
Time Necessary: Approximately 1.5 hours Tools Required: How to install Front Brake Pads on your 99-04 GT, V6 Jack Jack stands Torque wrench Ratchet Lug wrench 15mm socket 12mm socket Large C-clamp Syringe
More informationMopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion
Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion This kit is for either Mopar 8 ¾ or Mopar 9 ¾ (Dana). This kit is designed to work with axles with either GM 5 x 4.75 Bolt Pattern
More information55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left).
SUM-BK1624A Full Size GM Installation Instructions Rear Disc Conversion 55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured
More informationA /F/X Body Instruction Packet Rear Disc Conversion
A /F/X Body Instruction Packet Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes (pictured left). Rotor
More informationInstallation Instructions
Instructions Created by an: 1986-1995 Toyota Pickup 4Runner Hilux Front Ball Joint Spacer Kit - 2.5" 64mm Lift by Low Range Off-Road (SKU# TSP-BJS-1.5 & TSP-BJS-1.5-W/Shocks) Installation Instructions
More informationFord 8, 9 Small Bearing Installation Instructions Rear Disc Conversion
Ford 8, 9 Small Bearing Installation Instructions Rear Disc Conversion This kit is for Ford 9 rear axles with the small (2.835 ) style bearing and Ford 8 rear ends. This kit is designed to work with axles
More informationWheels. Wheels and Tires ! CAUTION. Wheel Selection
Wheel Selection Wheels Wheels are very important and critical components of your running gear system. When specifying or replacing your trailer wheels it is important that the wheels, tires, and axle are
More informationFull Size GM Installation Instructions Rear Disc Conversion
Full Size GM Installation Instructions Rear Disc Conversion 65 68 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left).
More informationInstallation Instructions
Instructions Created by an: DIY Alignment Toe Set Tool, 5 Patterns (SKU# DIY-TST) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools
More informationHUB & WHEEL INSTALLATION
HUB & WHEEL INSTALLATION 1.0 SCOPE This specification covers the torque requirements for the attachment of all component parts of Spoke Wheels, Rims, Tyres and Hub assemblies. 1.1 Spoke Wheels CAUTION:
More informationTrailer Wheel & Tire Facts
Trailer Wheel & Tire Facts Trailer Wheel & Tire Facts Replacing the wheels and tires on your trailer shouldn t be a difficult task, but then you hear terms like load range, bias, radial, pilot diameter
More informationLEXUS GS 350/GS 450h/GS-F WHEEL LOCKS Preparation
S Preparation Part Number: PT76-0986 (PPO) 0076-00900 (DIO) Kit Contents 4 Wheel Lock Key Tool Stuffing Pack w/id Card Hardware Bag Contents Additional Items Required For Installation Pouch P/N: PT76-06999
More informationThe Wheel Doctor. Wheel Locks Lug Nuts Valves Accessories. Quality Wheel Nuts and Accessories. The Wheel Doctor. Quality Wheel Nuts and Accessories
The Wheel Doctor Wheel Locks Lug Nuts Valves Accessories TIPS FOR CORRECT WHEEL NUT IDENTIFICATION Supplying your customer with the correct wheel nuts involves more than ensuring you have the correct thread
More informationInstallation Instructions
Instructions Created by an: Inchworm Gear Clockable Toyota Dual Transfer Case Adapter Kit, 21 or 23 Spline SKU# TCASE-IW-300-000 Installation Instructions CAUTION: Safety glasses should be worn at all
More informationA /F/X Body Instruction Packet Rear Disc Conversion
A /F/X Body Instruction Packet Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes (pictured left). If your
More informationInstallation Instructions
Instructions Created by an: Revised 7-11-17 LRT 2005-2017 3/1 Leveling/ Lift Kit for Toyota Tacoma by Low Range Off-Road (SKU# LR-LRTACO) Installation Instructions Suggested Tools: CAUTION: Safety glasses
More informationInstallation Instructions
Instructions Created by an: Inchworm Tacoma Dual Case Adapter Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools
More informationFox 2.0 Adjustable Coilovers (Par# ) Installation on a 2013 F-150 (2WD)
Fox 2.0 Adjustable Coilovers (Par# 983-02-052-2) Installation on a 2013 F-150 (2WD) This guide is for the install of the Fox 2.0 adjustable leveling struts on a 2013 F-150 2WD, these are being installed
More informationMM Caster Camber Plates, (Mm6CC-10)
3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com MM Caster Camber Plates, 2015+ (Mm6CC-10) Read all instructions before beginning
More informationASSEMBLY INSTRUCTIONS FOR PART NUMBER GROUP
ASSEMBLY INSTRUCTIONS FOR DYNAPRO 6 BIG BRAKE FRONT HAT KIT, 1.19 DIAMETER VENTED ROTOR 1990-005 ACURA/CIVIC ( LUG) 000-003 CIVIC SI ( LUG) 007 - PRESENT HONDA FIT FOR FACTORY 6 mm DISC SPINDLE PART NUMBER
More informationModern Auto Tech Study Guide Chapter 65 & 66 Pages Tires, Wheels, Bearings 51 Points. Automotive Service. Danger of Old Tires!!
Modern Auto Tech Study Guide Chapter 65 & 66 Pages 1241 1278 Tires, Wheels, Bearings 51 Points Automotive Service Danger of Old Tires!! Tires Manufactured Since 2000 Since 2000, the week and year the tire
More informationUnderstanding Wheel Offset and Backspacing
Understanding Wheel Offset and Backspacing Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs.
More informationMCG! 16 MOPAR COLLECTOR'S GUIDE
Wayne Brown, better known in Mopar circles as "The Ram Man" spends more time studying brakes than anybody we know. Seriously, the guy absolutely thrives on messing about with old braking systems and coming
More information*THIS KIT IS NOT INTENDED FOR VEHICLES WITH ABS*
*THIS KIT IS NOT INTENDED FOR VEHICLES WITH ABS* Notes: New full-cast rotors from 1990 or newer Wrangler must be used with this kit, this rotor (ITT #65225 or equivalent) has a.25 thick mounting flange.
More informationHawk Brake Pads ( Mustang GT/V6 Rear Pair)
Hawk Brake Pads (1994-2004 Mustang GT/V6 Rear Pair) The below installation instructions work for the following products: Hawk HPS Brake Pads (1994-2004 Mustang GT/V6 Rear Pair) Hawk Performance Ceramic
More information2.5 Strut Spacer Lift. Ford F150 2WD or 4WD Part#:
Part#: 013250 2.5 Strut Spacer Lift Ford F150 2WD or 4WD 2009-2014 Rev. 022514 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail: tech@bds-suspension.com
More informationINSTALLATION OF ROAD WHEELS AND TIRES
INSTALLATION OF ROAD WHEELS AND TIRES SAFETY PRECAUTIONS If any installation problems are encountered, please call G&B Specialties, Inc. for technical assistance before continuing with the installation
More informationA /F/X Body Instruction Packet Rear Disc Conversion
A /F/X Body Instruction Packet Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes (pictured left). If your
More informationSpikes-Spider Hub Installation
Spikes-Spider Hub Installation The instructions that are provided with the Spikes Spiders are pretty good. I've created this page for two reasons: to show those that are thinking of buying a set exactly
More informationMopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion
Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion This kit is for either Mopar 8 ¾ or Mopar 9 ¾ (Dana). This kit is designed to work with axles with either GM 5 x 4.75 Bolt Pattern
More informationHow to Change Front Brake Pads on a Toyota Corolla
How to Change Front Brake Pads on a Toyota Corolla Link to this article on (All other links in this document are disabled) Follow this picture guide to change the front brake pads on a 2003-2008 Toyota
More informationChapter. Tire, Wheel, and Wheel Bearing Fundamentals
Chapter 74 Tire, Wheel, and Wheel Bearing Fundamentals Objectives After studying this chapter, you will be able to: Identify the parts of a tire and wheel assembly. Describe different methods of tire construction.
More informationBlue Lightning Belt Drive Installation Instructions
June 25, 2007 Water Walker LLC Montrose Colorado 81401 Blue Lightning Belt Drive Installation Instructions Parts List: Bolts and mounting hardware A special installation tool A Gates (brand) Poly Chain
More informationDODGE OFF ROAD T-STYLE STEERING KIT INSTALLATION INSTRUCTIONS
Dodge Off Road, LLC Specializing in Dodge Ram Solid-Axle 4x4 Suspension and Steering for Off Road Applications 855.9009.DOR sales@dodgeoffroad.com dodgeoffroad.com DODGE OFF ROAD T-STYLE STEERING KIT INSTALLATION
More informationQuestion Fit aftermarket alloy wheels to a C4 or C4P / C4GP and not have bad vibration as 65mph??
Page 1/5 Frequently Asked Questions Question Fit aftermarket alloy wheels to a C4 or C4P / C4GP and not have bad vibration as 65mph?? Answer Please note that this also applies to fitting Full Size spare
More information2011+ Adjustable Tie-rod Ends (Mm5TR-2)
3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com 2011+ Adjustable Tie-rod Ends (Mm5TR-2) Instructions 1. Set the parking brake
More informationWheels. Wheels and Tires ! CAUTION. Wheel Selection
Wheels Wheel Selection Wheels are a very important and critical component of your running gear system. When specifying or replacing your trailer wheels it is important that the wheels, tires, and axle
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 33698 19 ALUMINUM WHEEL 2007 MDX Issue Date OCT 2006 PARTS LIST Parts for TPMS sensor assembly Aluminum wheel (The illustration may
More informationPRODUCT SPEC GUIDE. Published May 2016
PRODUCT SPEC GUIDE Published May 26 The Invention of THE LIGHTWEIGHT INNOVATION LEADER. MAGNAFORCE Proprietary MagnaForce alloy offers a % increase in strength over existing alloys Alcoa Ultra ONE Wheels
More informationFull Size GM Installation Instructions
Full Size GM Installation Instructions Rear Disc Conversion 55 64 Full Size GM (Impala, Bel Air, etc.) This kit is for axle with a 3 3/8 spread center to center on the top two bolt holes (pictured left).
More information1209A GM B-BODY Double Adjustable Trailing Arms
1209A 78-96 GM B-BODY Double Adjustable Trailing Arms Warning: This installation should be performed by a trained professional. Tools Required for this Installation - 4 post lift or alignment rack preferable
More informationWRANGLER, CHEROKEE AND COMANCHE, FRONT AXLE WHEEL HUB CONVERSION KIT
WRANGLER, CHEROKEE AND COMANCHE, FRONT AXLE WHEEL HUB CONVERSION KIT -YA WU-07 5 x 4.5 -YA WU-08 5 x 5.5 *THIS KIT IS NOT INTENDED FOR VEHICLES WITH ABS AND YA WU-08 WILL CHANGE BOLT PATTERN TO 5 ON 5.5*
More informationInstallation Notes: #86000-R Race Series +3.5 L/T Kit
159 North Maple St. Unit J, CORONA CA 92880 P. 951-737-9682 F. 951-737-9006 WWW.CHAOSFAB.COM Installation Notes: #86000-R Race Series +3.5 L/T Kit Factory manual is recommended for removal and re-installation
More informationSpindle Mount Steel Wheel. Valve Stems WHEELS, TIRES & ACCESSORIES. 01
Steel Wheels Add beauty, performance, and the appeal of a custom look to your VW Sedan, Bus, or Buggy with these precision made heavy duty wide steel wheels. Wide rims accept larger tires, allowing more
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 39833 19 ALUMINUM WHEEL 2009 MDX Issue Date JULY 2008 PARTS LIST Parts for TPMS sensor assembly Aluminum wheel (The illustration may
More informationHandout Activity: HA511
Using a tire pressure gauge Engines: Motive Power Types: Handout Activity: HA511 HA511-2 Student/Intern information: Name Date Class Using a tire pressure gauge Summary There are two main types of tire
More informationAdjustable Tie-rod Ends (Mm5TR-1)
3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com 2005-10 Adjustable Tie-rod Ends (Mm5TR-1) 3. Remove the front wheels. 4. Loosen
More informationWheel Alignment Defined
Wheel Alignment Defined While it's often referred to simply as an "alignment" or "wheel alignment," it's really complex suspension angles that are being measured and a variety of suspension components
More informationWheel Spacer. center bore thin spacer. brake rotor and hub. raised hub. thicker spacer. Page - 1
center bore thin Things you need to do: 1) Select the correct. Pick s that match your bolt pattern. Then use our online video to help you select the correct thickness. The video demonstrates how to use
More informationLong Wheelbase D110. 1/10 SCALE 4x4 TRUCK KIT
Long Wheelbase D110 1/10 SCALE 4x4 TRUCK KIT Recommended Tools Hex Drivers (1.5mm, 2mm, 2.5mm) Thread Lock Cross Wrench Long Nose Pliers Tips for Assembly Use good quality hex drivers to avoid stripping
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 37174 18 ALUMINUM WHEEL P/N 08W18-SEC-200B 2008 TSX Issue Date JUNE 2007 PARTS LIST Aluminum wheel (The illustration may differ from
More informationTechnical Information
Product Group: TRAILERS Model: ALL MODELS This bulletin is provided for technical reference and service related updates. If you have any questions, comments or do not wish to receive these e-mails, please
More informationQuestion Fit aftermarket alloy wheels to a C4 or C4P / C4GP and not have bad vibration as 65mph??
Page 1/5 Frequently Asked Questions Question Fit aftermarket alloy wheels to a C4 or C4P / C4GP and not have bad vibration as 65mph?? Answer Please note that this also applies to fitting Full Size spare
More informationReal Square RSX User Instructions v. 10.2
Real Square RSX User Instructions v. 10.2 Basic RSX Kit Contents: (1) RSX Shaft Mounted Laser Assembly (2) Axle Alignment Fixtures (Hub Mount or Spindle Thread-on Mount) (2) Wheel Measurement Fixtures
More informationINSTALLATION SAFETY PRECAUTIONS OF ROAD WHEELS AND TIRES
INSTALLATION OF ROAD WHEELS AND TIRES SAFETY PRECAUTIONS If any installation problems are encountered, please call G&B Specialties, Inc. for technical assistance before continuing with the installation
More informationCOMPLETE FITTING INSTRUCTIONS FOR THE CASA PERFORMANCE SINGLE DISC HYDRAULIC BRAKE KITS
COMPLETE FITTING INSTRUCTIONS FOR THE CASA PERFORMANCE SINGLE DISC HYDRAULIC BRAKE KITS Congratulations! You are now the owner of the most powerful, modular hydraulic disc brake kit ever produced for the
More informationASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH DIAMETER SOLID ROTOR PINTO / MUSTANG II
ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH 0.75 DIAMETER SOLID ROTOR 97-978 PINTO / MUSTANG II (FIVE LUG CONFIGURATION ONLY)* PART NUMBER GROUP 0-03-B DISC BRAKES SHOULD ONLY BE INSTALLED
More informationASSEMBLY INSTRUCTIONS FOR DYNALITE BIG BRAKE FRONT HUB KIT WITH DIAMETER SOLID ROTOR CAMARO/FIREBIRD (DISC SPINDLE) PART NUMBER GROUP
ASSEMBLY INSTRUCTIONS FOR DYNALITE BIG BRAKE FRONT HUB KIT WITH.75 DIAMETER SOLID ROTOR 1979-1981 CAMARO/FIREBIRD (DISC SPINDLE) PART NUMBER GROUP -8175-B DISC BRAKES SHOULD ONLY BE INSTALLED BY SOMEONE
More informationGM FULL SIZE REAR DISC BRAKE KIT
GM FULL SIZE REAR DISC BRAKE KIT This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left). If your axle flange measures 3 1/8 from center to center, you need
More informationReplacement Front Outer Tie Rod End (85-93 All)
Replacement Front Outer Tie Rod End (85-93 All) Materials in the box: One outer tie rod end, castle nut, cotter pin, nut, and grease fitting. Tools Needed: Jack and Jack Stands Pry bar (you may or may
More informationI know it isn't possible on an Exclusive due to the Pneumatic suspension.
Page 1/6 Frequently Asked Questions Question Can I fit a spare wheel and carrier to a C4 Grand Picasso - C4GP Answer I have just bought a 2007 C4 Grand Picasso (For the NEW C4 Picasso B78 - please scroll
More informationDexter Never-Adjust Brake Install
Dexter Never-Adjust Brake Install Arctic Fox 2007 29-5T Warning: This involves lifting your trailer, working under and around it. If you do not have the correct equipment and knowledge for this, please
More informationASSEMBLY INSTRUCTIONS FOR PRO-MATRIX OE UPGRADE PAD AND ROTOR KIT REAR, WITH DIAMETER VENTED ROTOR CHEVROLET C-4 CORVETTE
ASSEMBLY INSTRUCTIONS FOR PRO-MATRIX OE UPGRADE PAD AND ROTOR KIT REAR, WITH 1.00 DIAMETER VENTED ROTOR 1988-1996 CHEVROLET C-4 CORVETTE PART NUMBER GROUP 140-8314 DISC BRAKES SHOULD ONLY BE INSTALLED
More informationDISC AND ELECTRIC BRAKE MAINTENANCE
Purpose To maintain and extend the product life of the Disc Brake and Electric Brake product lines. Safety Failure to follow the instructions provided in this manual may result in death, serious personal
More informationRecommended Practice
Recommended Practice Proposed RP 261 (T) VMRS 004-013-001 CONSIDERATIONS FOR AERODYNAMIC WHEEL COVERS PREFACE The following Recommended Practice is subject to the Disclaimer at the front of TMC s Recommended
More informationInstallation Instructions. 6 Basic System FTS21060BK / FTS21061BK / FTS21042BK GM 2WD C1500 P/U ONLY
Installation Instructions 6 Basic System FTS21060BK / FTS21061BK / FTS21042BK 2007-13 GM 2WD C1500 P/U ONLY 2007-13 GM 1500 Truck Basic System FTS21060BK / FTS21061BK / FTS21042BK 2007-13 GM 2WD C1500
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS REAR DRUM TO DISC BRAKE CONVERSION KIT A130 JEEP CJ SERIES W/AMC-20 REAR AXLES AND 5 x 5-1/2" BOLT CIRCLE Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking
More informationWD CHEVY/GM LIFT
92750100 99-06 2WD CHEVY/GM 1500 3 LIFT Thank you for choosing Rough Country for all of your suspension needs. Rough Country recommends a certified technician installs this system. In addition to these
More informationMAZDASPEED3 Intercooler Instructions
MAZDASPEED3 Intercooler Instructions Congratulations on your purchase of the COBB Tuning Front Mount Intercooler System for your 2007-2009 Mazdaspeed3. The following instructions should assist you through
More informationTOYOTA TUNDRA BIG BRAKE KIT Section I - Installation Preparation
TOYOTA TUNDRA 2007- BIG BRAKE KIT Section I - Installation Preparation Part Number: PTR09-34070 Kit Contents Item # Quantity Reqd. Description 1 1 Brake Rotor, LH Front 2 1 Brake Rotor, RH Front 3 1 Brake
More informationMarzocchi Suspension D-Street 24" D-Street 24" Technical instructions
Technical instructions Exploded view - D-Street 24" 80 Rif. Code Quantity D-Street 24" 80 - Oil levels Position Oil type Quantity (cc) Right fork leg SAE 7,5-550013 185 Left fork leg SAE 7,5-550013 185
More informationWe ve Upped the Ante.
Product Spec Guide Published September 2 The Invention of MagnaForce Surface option codes Alcoa aluminum disc wheel mounting dimensions are consistent with SAE J694 or ISO 4 as applicable. The finish Proprietary
More informationInstallation Guide for the JK Wrangler 2.5 Inch spring lift
Tera Manufacturing, Inc. 5251 South Commerce Dr. Murray, Utah 84107 Phone/801.288.2585 Fax/801.713.2313 www.teraflex.biz INSTALLATION GUIDE Installation Guide for the JK Wrangler 2.5 Inch spring lift Read
More informationSuzuki Samurai Coated Stainless Steel Braided Brake Lines (SKU# SB-BL) Installation Instructions
Suzuki Samurai Coated Stainless Steel Braided Brake Lines (SKU# SB-BL) Installation Instructions SUZUKI SAMURAI FRONT BRAKE LINES SUZUKI SAMURAI REAR BRAKE LINES Notice: After completing this installation
More informationInstallation Instructions
Instructions Created by an: Suzuki Samurai Roof Rack Kit for Hard Top, Tin Top by Low Range Off Road (SKU# SEB-RRTT) Installation Instructions CAUTION: Safety glasses should be worn at all times when working
More informationUpper Class Grille Main grille INSERT - #54127 / #54131 / #54133 / #51127 / #51131 / 51133
Parts included (1) - Main Full Opening - Polished - Part #54127 OR 1 Bar - Polished - Part #54131 OR 2 Bar - Polished - Part #54133 OR Full Opening - Black - Part #51127 OR 1 Bar - Black - Part #51131
More informationLPE C5 Battery Relocation Kit
LPE C5 Battery Relocation Kit The LPE C5 Corvette battery relocation kit improves vehicle weight distribution by moving weight to the rear of the vehicle. The improved weight distribution increases traction
More informationTORCH Main Grille Main grille INSERT - # / # Chevrolet Silverado
Parts included (1) TORCH Grille - Main (1) 40 LED - Part #6311271 OR Stealth - Part #6311271-BR OR (1) 30 LED - Part #6311281 OR Stealth - Part #6311281-BR Hardware included (1) - Large Bottom Mounting
More informationShotgun Single Barrel HPFP install guide
Shotgun Single Barrel HPFP install guide Thank you for your purchase of the VTT Shotgun Single Barrel HPFP upgrade! First thing to do when you open your box is to make sure all parts are in their respective
More informationNEW BRAKE INSTALLATION. Let us show you how a
Tech Article From Newsletter 17.2-2nd Quarter of 2011 NEW BRAKE INSTALLATION Let us show you how a Big Brake Install is easier than you think!! So, you have a 572 (or a hot 383) in your shoebox... you
More informationInstallation Instructions
Suzuki Samurai Rear Disk Brake Kits by Low Range Off Road (SKU# SB-LRD) Also included in the instructions are:!!! SB-LRDB Suzuki Samurai Disk Brake Bracket Kit by Low Range Off Road!!! SB-LRDB-FK-1 Suzuki
More informationSCION tc BIG BRAKE KIT Section I - Installation Preparation
SCION tc 2005- BIG BRAKE KIT Section I - Installation Preparation Part Number: PTR09-21080 Kit Contents Item # Quantity Reqd. Description 1 1 Brake Rotor, LH Front 2 1 Brake Rotor, RH Front 3 1 Brake Caliper
More informationGR40 SLA Installation and Set Up Instructions.
GR40 SLA Installation and Set Up Instructions. Read these instructions completely before beginning. These instructions are written for experienced installer/technicians with a strong idea as to how a chassis
More informationInstallation Guide for the JK Wrangler 4-Inch Suspension System with FlexArms
INSTALLATION GUIDE Tera Manufacturing, Inc. 5251 South Commerce Dr. Murray, Utah 84107 Phone/801.288.2585 Fax/801.713.2313 www.teraflex.biz Installation Guide for the JK Wrangler 4-Inch Suspension System
More information2005 and 09 Mustang install instructions Sequential / Chase Unit Partial Plug-N-Play Kit Meter4it Eng. Updated: 3/28/09
Updated: 3/28/09 Verify content of kit: 1- Unit with wiring harness 1- Red power wire with 15 amp fuse 1- Color instruction 2- Velcro for mounting 1-Driver taillight harness 1- Passenger taillight harness
More informationRAM HD Steering Stabilizer Clamp Installation Instructions
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SYNERGY MFG. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF SYNERGY MFG IS PROHIBITIED. Revisions Rev. Description
More informationINSTALLING ALLOY WHEELS. WHEEL FASTENERS Instead of referring to these allcritical pieces (the only thing that
Summer3-13 8/4/04 11:23 AM Page 4 This is the correct method of installing any alloy wheel. Use a torque wrench, following correct torque value and the proper criss-cross tightening pattern to avoid stressing
More informationINSTALLATION INSTRUCTIONS `64 ½ - 70 MUSTANG, HEIDTS IFS, PRO-G GEN II P/N: MTF-201
INSTALLATION INSTRUCTIONS `64 ½ - 70 MUSTANG, HEIDTS IFS, PRO-G GEN II P/N: MTF-201 Please read these instructions completely Before starting your installation. Assemble suspension on vehicle before powder-coating
More information