WORM GEAR SPEED REDUCERS

Size: px
Start display at page:

Download "WORM GEAR SPEED REDUCERS"

Transcription

1 WOM GE SPEED EDUCES PECSON QULY SYLE E MULPLE OS SPEEDS UP O rpm MEL: Housing - luminum lloy, Black nodized Shafts - nput - Carbon Steel, ntegral with Worm Polished -Hand hreads Bearings - nput - Ball Bearings Output - Sintered Bronze Bearings LUBCON: temperature range of - C + C. SPECFCONS: nput Speed: rpm Max. Backlash at Output: orque: Max. starting rque at input shaft: x - N m Max. cont. output rpm: N m. WEGH:. kg Other ratios are available on special order. PHONE:.. FX:.. Ø -... Ø -. OUPU M X. DP. PPED HOLES ECH END he projections shown are per SO convention... MEC COMPONEN ZME ZME ZME ZME atio. NOE: lso available in other styles where special shaft diameters or extensions are required. hese speed reducers are available with anti-backlash gears. nput speed, however, is limited rpm with a maximum continuous output rque of. N m. Maximum starting rque at input shaft is x - N m. EV:. K -

2 WOM GE SPEED EDUCES PECSON QULY SYLE E MULPLE OS SPEEDS UP O rpm MEL: Housing - luminum lloy, Black nodized Shafts - nput - Carbon Steel, ntegral with Worm Polished -Hand hreads Bearings - nput - Ball Bearings Output - Sintered Bronze Bearings LUBCON: temperature range of - C + C. PHONE:.. FX:.. SPECFCONS: nput Speed: rpm Max. Backlash at Output: ' orque: Max. starting rque at input shaft: x - Nm Max. cont. output rpm:. Nm Ø -.. WEGH:. kg Other ratios are available on special order..... OUPU Ø -.. M X. DP. PPED HOLES ECH END.. MEC COMPONEN he projections shown are per SO convention. atio ZME ZME ZME ZME ZME ZME NOE: lso available in other styles where special shaft diameters or extensions are required. hese speed reducers are available with anti-backlash gears. nput speed, however, is limited rpm with a maximum continuous output rque of. Nm. Maximum starting rque at input shaft is x - Nm. EV:. K -

3 WOM GE SPEED EDUCES PECSON QULY SYLE E MULPLE OS MEL: Housing - luminum lloy, Black nodized Shafts - nput - Carbon Steel Polished -Hand hreads Bearings - nput - Precision Ball Output - Self-Lubricating LUBCON: temperature range of - C + C. SPECFCONS: nput Speed: rpm Max. Backlash at Output: orque: Max. starting rque at input shaft: x - N m Max. cont. output rpm:. N m WEGH:. kg MEC COMPONEN ZME ZME ZME ZME ZME ZME ZME ZME ZME atio. PHONE:.. FX:.. Ø -... NOE: lso available in other styles where special shaft diameters or extensions are required. hese speed reducers are available with anti-backlash gears. nput speed, however, is limited rpm with a maximum continuous output rque of. N m. Maximum starting rque at input shaft is x - N m.. OUPU Ø -.. M X. DP. PPED HOLES ECH END he projections shown are per SO convention.. -

4 GH NGLE HELCL GE SPEED EDUCES MULPLE OS ED SPEEDS UP O PM BSE-MOUNED LGH-DUY MEL: Housing and Base - luminum lloy, Black nodized Gears - Hardened Steel Helical Shafts - Steel-Plated SPECFCONS: Backlash: Nominal ncluding End Play PPOX. WEGH: grams For : ratio, any shaft may be used as input. SEES S SEES MEC COMPONEN ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM - he projections shown are per SO convention. SQ. (YP). (YP) (YP). (YP). (YP) Ø. HOLES.. Shaft Extension PHONE:.. FX:.. Gear atio : : : : : : : : : : : : : : : : : : : : : : : : SQ. Duty ntermittent Continuous... *GESE FNG D SEES * Shaft extension may be provided here in lieu of grease fitting (special item). Ultimate Static Output rpm nput. From : : atio W (/ HP) W (/ HP) orque Capacity N m Manual.. From : : atio W (/ HP) W (/ HP) SHF. OUPU SHF. Ø +. Dynamic

5 GH NGLE HELCL GE SPEED EDUCES MULPLE OS ED SPEEDS UP O PM PNEL-MOUNED LGH-DUY MEL: Housing and Base - luminum lloy, Black nodized Gears - Hardened Steel Helical Shafts - Steel-Plated SPECFCONS: Backlash: Nominal ncluding End Play PPOX. WEGH: grams For : ratio, any shaft may be used as input. he projections shown are per SO convention. S SEES MEC COMPONEN ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM ZMD ZMS ZM SEES Shaft Extension.. (YP) GESE FNG... PHONE:.. FX:.. Gear atio : : : : : : : : : : : : : : : : : : : : : : : :. (YP) SQ.. Duty ntermittent Continuous (EF.) D SEES Ultimate Static Output rpm nput. Ø. HOLES From : : atio W (/ HP) W (/ HP) / HEX. NUS /-. HD orque Capacity N m Manual From : : atio W (/ HP) W (/ HP) Dynamic - Ø (YP) -.

MAGNETIC PARTICLE SLIP CLUTCHES

MAGNETIC PARTICLE SLIP CLUTCHES MGNEC PCE SP CUCHES DESGN: he magnetic particle slip clutch uses a sealed, steel outer housing and permanent magnets arranged alternately (north and south poles) around a central hub. PHONE:.. FX:.. WWW.SDP-S.COM

More information

Quadro Aluminum Worm Gear Reducers

Quadro Aluminum Worm Gear Reducers Quadro luminum Worm Gear educers egal rand riven to be the est Quadro luminum Worm Gear educers dvantages ompact and lightweight aluminum alloy housing is up to one third smaller than alternatives deal

More information

MULTIPLATE IN-LINE SLIP CLUTCHES

MULTIPLATE IN-LINE SLIP CLUTCHES MULPL N-LN SLP LUHS PHON:..00 FX:.. WWW.SP-S.OM FUNON: Multiplate slip clutches control torque for intermittent, continuous, or overload slip. t will drive in 0 both directions, slip when the torque setting

More information

TIMING BELTS, PULLEYS, CHAINS AND SPROCKETS

TIMING BELTS, PULLEYS, CHAINS AND SPROCKETS MNG BELS, PULLEYS, CHANS AND SPOCKES PHONE:.. FAX:.. WWW.SDP-S.COM Center Distance Designer: Provides computerized Drive atio and Center Distance calculations. he Center Distance Designer program, on the

More information

Quadro Aluminum Worm Gear Reducers

Quadro Aluminum Worm Gear Reducers Quadro Aluminum Worm Gear educers A egal Brand riven to be the Best Quadro Aluminum Worm Gear educers Advantages ompact and lightweight aluminum alloy housing is up to one third smaller than alternatives

More information

FAIRLOC THE INTEGRAL FASTENER

FAIRLOC THE INTEGRAL FASTENER FAOC HE NEGA FASENE Fairloc is a patented component fastening system that is built into the hub of the part. How it works is explained on page -. he relationship between the clamp screw fastening torque

More information

MAGNETIC CLUTCHES & COUPLINGS

MAGNETIC CLUTCHES & COUPLINGS MGEIC CLUCHE & COUPLIG PPLICIO EXMPLE UWID EIO COOL Brake mounted on shaft of unwind spool or bobbin. Brake Film PHOE:.. FX:.. WWW.DP-I.COM Full diameter = mm Empty core diameter = mm verage tension =

More information

TECHNICAL CHARACTERISTICS

TECHNICAL CHARACTERISTICS GEARBOX WM 26 8 Nm TECHNICAL CHARACTERISTICS Worm gearbox. Life-time lubrication by grease, therefore it is main tenance-free. Housing. Die-casting aluminium. Worm-shaft. Hardened steel with grinding.

More information

HEAVY DUTY WORM GEARBOX MODEL SBWG

HEAVY DUTY WORM GEARBOX MODEL SBWG FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material

More information

ASSEMBLIES. Table of Contents C BERG

ASSEMBLIES. Table of Contents  C BERG ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................

More information

Vane Air Motors - P1V-B

Vane Air Motors - P1V-B Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:

More information

SUB-FHP DC GEARMOTORS PARALLEL SHAFT GEARMOTORS

SUB-FHP DC GEARMOTORS PARALLEL SHAFT GEARMOTORS 10-100 In-Lbs Torque 36-100 In-Lbs Torque Electrical Specifications: SCR Rated Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty service over a 60:1 speed range.

More information

WEIGHT. Reduction ratio 2:1 3:1 4:1 5:1 6:1 7:1. Max Input Speed

WEIGHT. Reduction ratio 2:1 3:1 4:1 5:1 6:1 7:1. Max Input Speed OFFSET SPUR GEAR REDUCERS HPCFF10 ø15 HPCFF10 HPCFF10-2 2:1 93 2000 1000 1.55 125.88 HPCFF10-3 3:1 93 2000 666 1.49 125.88 HPCFF10-4 4:1 93 2000 500 1.33 125.88 HPCFF10-5 5:1 93 2000 400 1.27 125.88 HPCFF10-6

More information

DCmind: DC direct-drive brush motors

DCmind: DC direct-drive brush motors DCmind: DC direct-drive brush motors mm - 5 W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP5 In accordance with U - CE - ROHS regulations Part numbers V V V Type 95

More information

DCmind: DC direct-drive brush motors

DCmind: DC direct-drive brush motors DCmind: DC direct-drive brush motors 6 mm - W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP6 In accordance with U - CE - ROHS regulations Part numbers V V 8 V 9 V Type

More information

Tooth thickness Dedendum. Addendum. Centre distance Nominal

Tooth thickness Dedendum. Addendum. Centre distance Nominal FORMULAS SPUR GEARS TO FIND:- PCD ØD MODULE No. of TEETH CP ADDENDUM DEDENDUM MODULE No. of TEETH x MOD (mm) (No. of TEETH + ) x MOD (mm) 5.4 MODULE CP π (mm) PCD MODULE (mm) MODULE x π (mm) MODULE (mm)

More information

MOUNTING CARRIAGE TOPS

MOUNTING CARRIAGE TOPS MOUNTING CARRIAGE TOPS Linear Motion Systems " I " Holes (4) are for customer mounting purposes. MOTOR TABLE TOPS USE M4X.7 TAPPED HOLES Material: Aluminum Alloy (6061) Finish: Black Anodized Note: Mounting

More information

Worm gear. Worm Gears. Description. Special features. Customer specific

Worm gear. Worm Gears. Description. Special features. Customer specific Worm gear Worm Gears 2010 Description Worm gear for universal applications Center distance 20 mm Compact design Outer dimensions 60x60x35 mm 7 ratios of 13:1 to 65:1 Aluminium housing, anodized Maintenance-free

More information

Hydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified

Hydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life

More information

WEIGHT. Circlip. Keyways 2mm Js9

WEIGHT. Circlip. Keyways 2mm Js9 Gearboxes CROSSED HELICAL, REDUCTION GEARBOX HPCE20 Gearboxes Range Ratio 0.Nm to.8nm 1:1-0:1 Crossed Helical, Reduction (Hardened Gears) HPCE20 M x 8 deep HPCE20-1 1:1 Helical 88 000 000 YES 17.29 HPCE20-2

More information

EFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]

EFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5.  Feed force [N] Feed speed [m/s] EFFICIENCY PERFECTED DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5 2000 TEETH RATIO i = 5 Feed force [N] 0000 8000 6000 4000 DE-DG5 m4 DE-DG5 m DE-DG90 m DE-DG90 m2 DE-DG75

More information

942D SERIES 32mm (36mm motor) PLANETRY (EPICYCLIC) METAL GEARBOX

942D SERIES 32mm (36mm motor) PLANETRY (EPICYCLIC) METAL GEARBOX 942D SERIES 32mm (36mm motor) PLANETRY (EPICYCLIC) METAL GEARBOX 12 GEARBOX DIMENSIONS 64.5 4-M3x5 dp 12 4-90o 20 dia 6 dia 5.5 35.8 dia 26 dia 18 17 3 GEARBOX REF. L 942D51 (5:1) 20.4 942D1001 (100:1)

More information

SPRING-WRAPPED SLIP CLUTCHES

SPRING-WRAPPED SLIP CLUTCHES SPG-WAPPD SLP CLUCHS AUS: Long life under continuous slip conditions. Unidirectional or bidirectional operation. Same or different clockwise and counterclockwise torques. Precise and stable limit torque

More information

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Max. particle size 5 µm. Pressure for determining piston forces. Materials: 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining

More information

Bevel gearboxes. KSZ and KGZ Advantages. Same mounting height no support plates required. Suitable for standard motor flanges

Bevel gearboxes. KSZ and KGZ Advantages. Same mounting height no support plates required. Suitable for standard motor flanges KSZ and KGZ Advantages Same mounting height no support plates required Screw jack gearboxes ZIMM bevel gearboxes KSZ and KGZ have the same installation height as the ZIMM screw jack gearbox. No support

More information

Flat Products. Check our website for the latest technical information.

Flat Products.   Check our website for the latest technical information. Flat Products www.daytonlamina.com Check our website for the latest technical information. BE OF CONENS Introduction... 3 -Gibs Bronze-Plated, Inch... 4 V-Gibs Bronze-Plated, Inch... 5 -Gibs Solid-Bronze,

More information

HYDRAULIC MOTOR-BRAKE B/MR

HYDRAULIC MOTOR-BRAKE B/MR HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22

More information

Keyway 3 x 12. Max Input Speed

Keyway 3 x 12. Max Input Speed Range 2.2Nm to 4.1Nm 25:1-400:1 HPCPP5 Double Reduction, Worm Gear Reducers 0.7 Kg MAX INPUT SPEED 000 CASE MAT L Aluminium HE0TF 6 5 17 6 (4) ø 4.2 20 15 2 58 5 x 12 65 Shaft ø 8.00 h7 (8) tapped Holes,M4

More information

Cardan Shaft Coupling

Cardan Shaft Coupling Crdn Shf Couping 55 Crdn Shf Couping GF Series 21 R < 3,2µm imension ppy o unighened unis. Type d w* M c Fnge M Numer of kg mm knm mm mm mm mm mm mm mm os** Nm os** G F 58-21 20 0,12 60 18 22 58 47 30

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

Gearmotors Parallel Shaft - PZ Series - DC

Gearmotors Parallel Shaft - PZ Series - DC 90 & 180 - TENV - PZ Series Price Model Frame P X XL XH 4 40 1 40 M1115002.00 496 985.620 PZ5-30A 450 90 0.46 155 3.00 3.25 9.28 7.72 S, US 40 1 40 M1125046.00 496 985.623 PZ5-30A 450 180 0.19 155 3.00

More information

NSF International Certified. Polished matte finish maintains clean appearance throughout operation. Optional high. pressure washdown.

NSF International Certified. Polished matte finish maintains clean appearance throughout operation. Optional high. pressure washdown. SS700 Series Worm Gear Speed educers IP69 When ordered with high pressure washdown seal option* Trusted Worm Gearing with a evolutionary Smooth xterior NS International ertified Polished matte finish maintains

More information

Parallel Grippers- Triple Wedge Centering Series

Parallel Grippers- Triple Wedge Centering Series RP SERIES 1.1 Parallel Grippers- riple Wedge entering Series achine loading hree jaws make this gripper ideal for machine loading and unloading. Sealed design repels chips and other particulate from the

More information

EJP SERIES Right-angle Worm

EJP SERIES Right-angle Worm EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

Sheet 1 Variable loading

Sheet 1 Variable loading Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.

More information

HYDROSTATIC STEERING UNITS TYPE XY.../1, 2

HYDROSTATIC STEERING UNITS TYPE XY.../1, 2 HYDOSIC SEEING UNIS YE XY.../1, 2 he +S Hydraulic Hydrostatic Steering units are used in low-speed vehicles which driving speed does not exceed 6 km/h - such as: building machines, fork-lift trucks, harvesting

More information

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders

More information

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

Gears And Gear Drives (India) Pvt Ltd

Gears And Gear Drives (India) Pvt Ltd Gears And Gear Drives (India) Pvt Ltd Design and manufacturers of Lifting Systems An ISO 9001-2015 Certified Company. Seshagiri Managing Director Gears and Gear Drives (India) Pvt Ltd Motion Technology,

More information

Hoist Brake Motor. Hoist Gearbox Reeving Wire Rope Construction

Hoist Brake Motor. Hoist Gearbox Reeving Wire Rope Construction DR11 Monorail Hoist Hoist Brake Motor Hoist Gearbox Reeving Wire Rope Construction Rope Drum Trolley Brake Motor Trolley gearbox Trolley Trolley Wheels Load Block Hoist VFD Controls Trolley VFD Controls

More information

+1 (800) Gear Reducers STOCK PRODUCTS CATALOG. Industry. DRIVING & Controlling WorldWideElectric.net

+1 (800) Gear Reducers STOCK PRODUCTS CATALOG. Industry. DRIVING & Controlling WorldWideElectric.net +1 (800) 808-2131 2017-2018 Gear Reducers STOCK PRODUCTS CATALOG ndustry DRVNG & Controlling WorldWideElectric.net VST OUR WEBSTE www.worldwideelectric.net Table Of Contents SHAFT MOUNT REDUCERS PAGE MULTPLER

More information

Deflector method ball screws

Deflector method ball screws Deflector method ball screws Page Features and specifications of ball screws B_2 Ordering instructions, and lead combinations B_21 tocked DP series (C3 grade) 6 mm, One end finished B_22 mm, One end finished

More information

1324 Cypress Avenue P.O. Box Los Angeles, CA (800) FAX (323)

1324 Cypress Avenue P.O. Box Los Angeles, CA (800) FAX (323) 1324 Cypress venue P.O. Box 65587 os ngeles, C 90065-1220 www.culvervalve.com (800) 421-6136 FX (323) 222-1223 CU COMPY Brief History of Culver Co. B O F C O Culver Co. was started in 1962 as a direct

More information

HYDROSTATIC STEERING UNITS AND ACCESSORIES

HYDROSTATIC STEERING UNITS AND ACCESSORIES HYDOSIC SEEING UNIS ND CCESSOIES CONENS age Hydrostatic Steering Units ype XY.../1, 2... Hydrostatic Steering Units ype HKU.../, 4...5 Hydrostatic Steering Units ype HKU.../7...6 Hydrostatic Steering Units

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP) RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can

More information

Ball Screws Inch Series

Ball Screws Inch Series Ball Screws Inch Series BALL SCREWS Table of Contents Description Page Product Overview................................ 38 Precision Rolled Ball Screws Inch Series......... 42 Visual Product Reference

More information

BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Length [mm] Stroke Stroke LENGTH

BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Length [mm] Stroke Stroke LENGTH BALL SCREW LINEAR ACUAOR BSA 11 AC motor OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc Capacitor Rear bracket SP Pin Standard head with threaded hollow bore BA 80 depth17 Stroke end reed switches FCM (brake

More information

QUICK REFERENCE Stock Sub-FHP Gearmotors

QUICK REFERENCE Stock Sub-FHP Gearmotors QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156

More information

Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm

Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear

More information

Sold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099

Sold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 PITTMANEXPESS Welcome to Pittman ExpressSM The PittmanExpress program lets you choose from a selection of over 100 quality Pittman motors. PittmanExpress offers you a convenient source of quality products

More information

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position.   THE ultimate COUPLING from Nm LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison

More information

Micro-D Printed Circuit Board Connectors

Micro-D Printed Circuit Board Connectors PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the

More information

Stainless Worm & Helical bevel Gearboxes

Stainless Worm & Helical bevel Gearboxes Stainless Worm & Helical bevel Gearboxes Designed for Demanding Environments Stainless Steel Worm Gears To complement the Marlin Stainless motor range we also offer high quality, European-manufactured

More information

antriebstechnik ELA Electromechanical Linear Actuator

antriebstechnik ELA Electromechanical Linear Actuator D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor

More information

K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS

K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS A comprehensive range of ball valves to suit a wide variety of industrial applications FEAURES he range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections.

More information

Series BD Screw Jacks

Series BD Screw Jacks www.radicon.com Series BD Screw Jacks Technical Up to - 100Te / 5m/min Screw Jacks CBD-1.00GBD0111 SERIES BD PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food,

More information

Берг АБ Тел. (495) , факс (495)

Берг АБ Тел. (495) , факс (495) AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM) LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the

More information

QUICK REFERENCE Stock Sub-FHP Gearmotors

QUICK REFERENCE Stock Sub-FHP Gearmotors Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage

More information

LU-0515ASC. ALUMINUM 5 ROW x 15'-0" - UNIVERSAL SERIES MODEL CS.1 OPTIONS: -RB = RUBBER BUMPERS -MS = MUD SILLS 6" RISE / 12" SEAT 5 ROW BLEACHER

LU-0515ASC. ALUMINUM 5 ROW x 15'-0 - UNIVERSAL SERIES MODEL CS.1 OPTIONS: -RB = RUBBER BUMPERS -MS = MUD SILLS 6 RISE / 12 SEAT 5 ROW BLEACHER LUMINUM 5 OW x 5'-0" - UNIVESL SEIES MODEL OPTIONS: -B = UBBE BUMPES -MS = MUD SILLS 4/4/07 CS. OPTIONL -MS (MUD SILL) OPTIONL -B (UBBE BUMPE) COVE SHEET 80 Sydney oad 80 Sydney oad 5'-0" '-6" TYP. OVEHNG

More information

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar

p max (see table of performances) Q max (see table of performances) MD1K MD1KD bar 41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-

More information

Escapements. AGE Series

Escapements. AGE Series GE Series Escapements merican Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 Fax: 203-452-5943 info@gi-utomation.com www.gi-utomation.com 1 GE-1 Feed Escapement uilt-in ir Cylinder

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive

More information

Gauge Valves and Instrumentation Manifolds

Gauge Valves and Instrumentation Manifolds Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443

More information

HIGH PRECISION PLANETARY GEARBOXES

HIGH PRECISION PLANETARY GEARBOXES HIGH PRECISION PLANETARY GEARBOXES 2 What if improving your application performance could reduce your mechanical transmission costs? 3 4 History tells the future Industrial equipment achieved unprecedented

More information

KTM BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS EF190 - TWO-PIECE BALL VALVE

KTM BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS EF190 - TWO-PIECE BALL VALVE M BALL VALVE FO INDIAL AND POCE APPLICAION EF190 - WO-PIECE BALL VALVE igh performance two-piece ball valve for demanding process and utility applications FEAE ENEAL APPLICAION he EF190 has been designed

More information

CONTENTS Bushings and Hubs

CONTENTS Bushings and Hubs CONTENTS s and Hubs TPER-LOCK s Features/Benefits............................................................. PT6-2 Nomenclature................................................................. PT6-2

More information

1. Axial Piston Pumps

1. Axial Piston Pumps xial iston umps 1. xial iston umps Series Model Maximum Operating ressure Maximum Displacement emarks age S n 3 /rev & M & remier Worldcup oldcup 6 4500 0.88 10 4500 1.26 15 4500 2.09 20, M20 1 4500 2.62

More information

PARALLEL PNEUMATIC GRIPPERS

PARALLEL PNEUMATIC GRIPPERS PARAE PNEUAI GRIPPERS PREISION OW PROFIE SERIES RP Series Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning lass 1 lean Room Rated with orrosion

More information

HARDWARE KITS PART # HA6815 & HA6860

HARDWARE KITS PART # HA6815 & HA6860 INSALLAION INSRUCIONS Copy Part# 68053, Rev., 10/015 Page 1 of 6 HARDWARE KIS PAR # HA6815 & HA6860 NOICE YAMAHA use Part # HA6815. EVINRUDE use Part # HA6860. SUZUKI use Part # HA6860. he following instructions

More information

RE34 PLANETARY GEARBOX

RE34 PLANETARY GEARBOX RE34 PLANETARY GEARBOX D1 5* 6.25* L2 20 20 * Only available for ratio 4, 16, 64. Input shaft dimensions Type Code Gear Dimensions L3 L4 D2 D3 D4 D5 D1xD2 max L1 1 Stage 2 Stages 3 Stages - - - - - - -

More information

Linear Guides Series OSP-E

Linear Guides Series OSP-E Linear Guides Series OSP-E NEW Contents Description Data Sheet No. Page Overview 1.40.020E 101-102 Plain Bearing SLIDELINE 1.40.021E 103-104 Roller Guide POWERSLIDE 1.40.022E 105-108 Aluminium Roller Guide

More information

TRAVEL MOTOR (CONT'D) Parts Identification

TRAVEL MOTOR (CONT'D) Parts Identification TRAVEL MOTOR (CONT'D) Parts Identification. Snap Ring. Plug. O-Ring. Cover 5. Bushing 6. Drive Shaft 7. Snap Ring 8. Planetary Carrier 9. Sun Gear 0. Snap Ring. Anti-Rotation Washer. Bearing. Planetary

More information

TQ-TQK-TR-MP LC-LCK-SL-KR Series. Precision Planetary Gearboxes

TQ-TQK-TR-MP LC-LCK-SL-KR Series. Precision Planetary Gearboxes TQ-TQK-TR-MP LC-LCK--KR Series Precision Planetary Gearboxes OUR PRODUCTS AT A GLANCE PRODUCT INLINE RIGHT ANGLE PRODUCT LINE-UP CONFIGURATIONS HIGH PERFORMANCE NEW TQ NEW TQK Yes Yes Highest Precision

More information

Cylinders with integrated guide Series QCTF and QCBF

Cylinders with integrated guide Series QCTF and QCBF > Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors

More information

RS & RT WORM GEAR BOXES

RS & RT WORM GEAR BOXES RS & RT WORM GEAR BOXES C-MRS-MRT ed0-2009 rev00 GB Product Description Multipurpose housing Aluminium die cast & Grey Iron Modular for all mountings Wormshaft ZI profile, hardened and ground. Alloy steel.

More information

Self-Clinching Standoffs Series CFSO, CFSOS, CFSOA (Through Threads)

Self-Clinching Standoffs Series CFSO, CFSOS, CFSOA (Through Threads) self-clinching standoffs are designed for quick, easy installation with any standard pneumatic, hydraulic or mechanical press. -threaded standoffs are used in metal panels with thickness of.040 in. (1.0

More information

JTW-SERIES MACHINE SCREW JACK

JTW-SERIES MACHINE SCREW JACK J A C TO N I N D U S T RY C O., LT D L I F T I N G S Y S T E M S S O L U T I O N S TEL: 86-769-81585810, 81585852 SKYPE: jactonjack EMAIL: sales@screwactuator.com WEB: www.screwactuator.com SERIES MACHINE

More information

contents about the range

contents about the range contents Overview 3 Motor data PBL42 4 PBL60 5 PBL86 6 Technical information 7 Controller data S controller 9 N and B controllers 10 50B controller 12 EMC Directive compliance 13 Geared motors PBL42 motor

More information

Indicator Lights Neon, LED and Filament Lamp

Indicator Lights Neon, LED and Filament Lamp Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White

More information

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Max. particle size 5 µm. Pressure for determining piston forces. Materials: Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³

More information

TIMING BELTS, PULLEYS, CHAINS AND SPROCKETS

TIMING BELTS, PULLEYS, CHAINS AND SPROCKETS MNG BELS, PULLEYS, CHNS ND SPOCKES PHONE:..00 FX:.. WWW.SDP-S.COM Handbook of iming Belts, Pulleys, Chains and Sprockets he echnical Section of this catalog is the result of close cooperation of Stock

More information

Monoblock directional control valves DL - Directional control valve

Monoblock directional control valves DL - Directional control valve Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal

More information

Patented AirShield Technology. Sentry Belt-Driven Spindles. C017 Cartridge Spindle B035, B040, B050, B070 & B090 Block Spindles

Patented AirShield Technology. Sentry Belt-Driven Spindles. C017 Cartridge Spindle B035, B040, B050, B070 & B090 Block Spindles Patented AirShield Technology Sentry Belt-Driven s C017 Cartridge B035, B040, B050, B070 & B090 Block s Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building

More information

Linipower Jack JWH. JWM Technical Notes. Model Comparison Table Drawings Reference Table for Standard Use Dimensions Precautions

Linipower Jack JWH. JWM Technical Notes. Model Comparison Table Drawings Reference Table for Standard Use Dimensions Precautions JWH Model Comparison Table Drawings Reference Table for Standard Use Dimensions Precautions Inquiry Form Product Information Installation Precautions Options JWH JWB JWM Technical Notes 184 Drawings JWH

More information

Cam roller guide LF6S complete axis

Cam roller guide LF6S complete axis Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

PE Series: INLINE Shaft Output

PE Series: INLINE Shaft Output PE Series: INLINE Shaft Output Features 3:1 to 100:1 ratios Integral motor adapter (MAI) offers a more compact solution Helical gearing produces more torque while running quieter compared to spur tooth

More information

Pressure Relief Valve

Pressure Relief Valve ressure Relief Valve For mounting on hydraulic pumps and motors Series ASDF and AGDF S short response times S trouble-free operation S with improved pressure-adjustment resolution S high levels of functionality

More information

280 Heavy Duty Cartridge Dual Seal

280 Heavy Duty Cartridge Dual Seal MECHNICL SEL INSTLLTION INSTRUCTIONS 80 Heavy Duty Cartridge Dual Seal SEL INSTLLTION Preparation Determine if the pump is in good condition.. Check the shaft or sleeve. 1. Remove all burrs and sharp corners,

More information

SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS

SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP Electrical Specifications: Both SCR (90 volt) and Low Voltage (12 volt) right angle gearmotors. the 90 volt motors are performance matched

More information

Sentry Precision Spindles

Sentry Precision Spindles Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building block spindle and is offered as a low-cost solution for many applications that call for a precision,

More information

Slide-Rite & Slide-Rite CR Gearbox

Slide-Rite & Slide-Rite CR Gearbox Gearboxes Gearbox and CR Gearbox Pages 2 through 7 Float-A-Shaft (FAS) Gearbox Pages 8 through 24 Visit www.tolomatic.com for the latest updates, CAD files and ordering. GEARBOXES www.tolomatic.com 1 GEARBOXES

More information

High Pressure, Subplate Mounted Directional Control Valves

High Pressure, Subplate Mounted Directional Control Valves ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple

More information

EDWARDS GEAR PUMPS REPAIR PARTS INDEX

EDWARDS GEAR PUMPS REPAIR PARTS INDEX SECION EDWARDS PAGE EDWARDS GEAR PUMPS REPAIR S INDEX READ AND UNDERSAND HE PUMP AND MOOR INSRUCIONS BEFORE AEMPING O INSALL, DISASSEMBLE OR REPAIR HE PUMP SECION EDWARDS PAGE 2 EDWARDS GEAR PUMPS MODELS,

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL) LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.

More information

TORQLIGHT SAFETY COUPLINGS

TORQLIGHT SAFETY COUPLINGS LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction

More information

C-SERIES S-SERIES. Metric Machine Screw Jacks

C-SERIES S-SERIES. Metric Machine Screw Jacks -SERIES S-SERIES Metric Machine Screw Jacks Power Jacks are a manufacturer focused on providing customers with the best engineered solution for precision linear actuation, power transmission and mechanical

More information