S7/1 Air Cleaners/Induction & Parts. Air cleaners

Size: px
Start display at page:

Download "S7/1 Air Cleaners/Induction & Parts. Air cleaners"

Transcription

1 S7/1 Air Cleaners/Induction & Parts S7/1 AIR CLEANERS/INDUCTION & PARTS AIR CLEANERS... S7/1 AIR SCOOPS... S7/5 AIR CLEANER PARTS... S7/6 Air Cleaners- 14 Tech Tip: If you are using a Holley carb, try to keep the air-cleaner top plate, at least 1/2 away from the tops of the two vertical vent pipes set in the top of the carb. Otherwise, the engine will run very badly. The pipes could be shortened a little, but you would need to clear all the filings out afterwards. Moroso Low Profile High Performance Air Cleaner This aircleaner is designed for good airflow, and is a good choice for racing. Moroso s unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow. Comes with mounting stud, PCV connection & wing nut. To allow the air cleaner to sink down around the carburetor, the bottom pan is deeply dished. The element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 70mm. The wing nut is clear of the top a further 7.5mm. Chrome plated steel with the Moroso name in raised letters. BY65910 Moroso 14 x 3 Chrome Steel Air cleaner Moroso Low Profile High Performance Air Cleaners These aircleaners are designed for good airflow, and are a good choice for racing. Moroso s unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow. Comes with mounting stud, PCV connection & wing nut. To allow the air cleaner to sink down around the carburetor, the bottom pan is deeply dished. The element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 70mm. The wing nut is clear of the top a further 7.5mm. Powder coated aluminium with the Moroso name in raised letters. BY65906 Moroso 14 x 3 Blue- powder coated aluminium Air cleaner Moroso Flat Bottom Racing Air Cleaner-for Holley Dominator This aircleaner is designed with a flat bottom to raise the installed height for additional sheet metal clearance in race cars like Nascar modifieds. Comes with mounting stud, & wing nut. The element is a replaceable paper element. Fits a 4 barrel carb with the Holley Dominator 7-5/16 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 163mm. The wing nut is clear of the top a further 5mm. Chrome plated steel with the Moroso name in raised letters. BY65946 Moroso 14 x 5 Chrome Steel Air cleaner for Holley Dominator Carb only Mr Gasket No-name Competition Air Cleaner Street or strip, combining the laminar air flow base and top design with a performance paper element. this air cleaner allows a greater amount of less turbulent air to enter the carburetor. Complete with stud and wing nut. The PCV fitting is not supplied, but can be purchased as an extra, under part number BY Fits a 4 barrel with the common 5-1/8 top platform. Height required from the carb platform to the top of the air cleaner is approximately 64mm. The wing nut is clear of the top a further 7.5mm. Chrome plated steel with no name in the top. [The lower plate is zinc plated rather than chrome plated. This has a silver effect]. Will not fit Edelbrock carb with electric choke unless used with BY9340 air cleaner spacer. BY9790 Mr Gasket 14 x 3 Chrome Steel Air cleaner Edelbrock Pro-Flo Chrome Air Cleaner Top off your engine with a good looking Pro-Flow air cleaner. The Edelbrock signature and styling coordinate beautifully with Edelbrock Signature Series rocker covers. These air cleaners are stamped from 18-gauge steel & triple chrome-plated for a high quality finish & great looks. Complete with wing nut. The mounting stud is not supplied, but can be purchased under part number KIT800. Fits a 4 barrel with the common 5-1/8 top platform. Height required from the carb platform to the top of the air cleaner is approximately 84mm, including the wing nut. Chrome plated steel with the Edelbrock name in the top. Will not fit Edelbrock carb with electric choke unless used with BY9340 air cleaner spacer. If being used with an Edelbrock carb, a swivel fuel union will be required- BY8089. BY1207 Edelbrock Pro-Flo 14 x 3 Chrome Steel Air cleaner Edelbrock Elite Series Air Cleaner- with Finned Aluminium Top Designed to match Elite series rocker covers & breathers, Edelbrock Elite Series air cleaners have a polished, finned, aluminium top, with a matt black background. Complete with wing nut & PCV fitting. The mounting stud is not supplied, but can be purchased under part number KIT800. Fits a 4 barrel with the common 5-1/8 top platform. Height required from the carb platform to the top of the air cleaner is approximately 56mm. The wing nut is clear of the top a further 12mm. Aluminium with the Edelbrock name in the top. Will not fit Edelbrock carb with electric choke unless used with BY9340 air cleaner spacer. If being used with an Edelbrock carb, a swivel fuel union will be required- BY8089. Screws in top are fake & are plastic. BY4207 Edelbrock 14 x 3 Elite series air cleaner- with finned Aluminium top Iss12

2 S7/2 Air Cleaners/Induction & Parts S7/2 Holley Low Profile Chrome Air Cleaner This aircleaner is a traditional looking, low restriction air cleaner. Comes with mounting stud, PCV connection & 3 legged wing nut. To allow the air cleaner to sink down around the carburetor, the bottom pan is deeply dished. The element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 73mm. The wing nut is clear of the top a further 13mm. Chrome plated steel with the Holley name in raised letters. BY Holley 14 x 3 Chrome Steel Air cleaner Mr Gasket Low Rider Chrome Air Cleaner This 14 air cleaner was originally designed to fit late model GM cars where the bonnet clearance is minimal. It features a chromeplated top with replaceable, paper, flame-retardant, high CFM filter for maximum efficiency. Comes with mounting stud, PCV connection & wing nut. To allow the air cleaner to sink down around the carburetor, the bottom pan is deeply dished. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 57.5mm. * The wing nut is clear of the top a further 6mm. Chrome plated steel with no name on the top. Will need a 1/2 air cleaner spacer, to use this air cleaner on a Holley 390 or 600 carb. * Dimensions arrived at include a 1/2 a/cleaner spacer. BY4339 Mr Gasket 14 x 2 Low Rider chrome steel air cleaner Edelbrock Pro-Flo Black Air Cleaner Top off your engine with a good looking Pro-Flow air cleaner. The Edelbrock signature and styling coordinate beautifully with Edelbrock Signature Series rocker covers. These air cleaners are stamped from 18-gauge steel & textured black powder coated for a high quality finish & great looks. Complete with wing nut & PCV fitting. The mounting stud is not supplied, but can be purchased under part number KIT800. Fits a 4 barrel with the common 5-1/8 top platform. Height required from the carb platform to the top of the air cleaner is approximately tbamm, including the wing nut. Black powder coated steel with the Edelbrock name in the top. If being used with an Edelbrock carb, a swivel fuel union may be required- BY /8 taller than the Y1223 Edelbrock 14 x 3 Black Aircleaner Billet Specialties Plain Polished Aluminium Air Cleaner This air-cleaner has a high quality industry leading mirror finish polish. The mounting hardware is stainless steel. Designed to fit standard 4-barrel carburetors with a 5-1/8 mounting platform. Height required from the carb mounting platform to the top of the air-cleaner is approximately tbamm, including the retaining screw. Complete with PCV fitting. BY15829 Billet Specialties plain polished aluminium 14 x 3 air cleaner Billet Specialties Ball Milled Polished Aluminium Air Cleaner This air-cleaner has a high quality industry leading mirror finish polish, with a ball milled top. The mounting hardware is stainless steel. Designed to fit standard 4-barrel carburetors with a 5-1/8 mounting platform. Height required from the carb mounting platform to the top of the air-cleaner is approximately tbamm, including the retaining screw. Complete with PCV fitting. BY15820 Billet Specialties ball milled polished aluminium 14 x 3 air cleaner

3 S7/3 Air Cleaners/Induction & Parts S7/3 AIR-CLEANERS-ROUND-NOT 14 Holley 8 MARINE Flame Arrestor This Flame arrestor is recommended for Marine engine use. It will filter the air, and help prevent an overlean condition, which could cause a dangerous backfire. Comes with mounting stud. A PCV connection cannot be used, as the base is too small. Has multiple sized mesh to stop ingress of contamination. Fits a 4 barrel carb with the common 5-1/8 top platform. QJ Flame arrestor/air cleaner for Marine use 8 diameter Moroso Flat Base 8-1/2 High Performance Air Cleaner This aircleaner, although smaller in diameter, gives good airflow. More for smaller displacement engines, or low rpm. Comes with mounting stud, PCV connection & wing nut. The base on this air cleaner is flat, this makes the air cleaner a bit taller.the element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 86mm. The wing nut is clear of the top a further 1.5mm. Chrome plated steel with the Moroso name in raised letters. BY66310 Moroso 8-1/2 Flat Base Chrome Steel Air cleaner Transdapt Flat Base 10 Muscle Car Style Air Cleaner Perfect for smaller displacement V8 engines. Comes with mounting stud, PCV connection & wing nut. The base on this air cleaner is flat, this makes the air cleaner a bit taller.the element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 86mm. The wing nut is clear of the top a further 12mm. Chrome plated steel with no name on the top. BY2282 TransDapt 10 Flat Base Chrome Steel Air cleaner Billet Specialties 10 Polished Aluminium Air Cleaners BY15229 Billet Specialties plain polished aluminium 10 air cleaner BY15220BSBillet Specialties ball-milled polished aluminium 10 air-cleaner Moroso Flat Base 11-1/2 High Performance Air Cleaner This aircleaner, although smaller in diameter, gives good airflow. Comes with mounting stud, PCV connection & wing nut. The base on this air cleaner is flat, this makes the air cleaner a bit taller.the element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 90mm. The wing nut is clear of the top a further 1.5mm. Chrome plated steel with the Moroso name in raised letters. BY66210 Moroso 11-1/2 Flat Base Chrome Steel Air cleaner 69.90

4 Air Cleaners/Induction & Parts S7/4 S7/4 Air Cleaners-NOT Round Billet Specialties Small Oval Polished Aluminium A/Cleaner BY15630 Billet Specialties Small Oval Raised-Ribs Polished Aluminium Air-Cleaner Billet Specialties Small Oval Plain & Ball Milled Aluminium Air Cleaner BY15329 Billet Specialties Small Oval Plain Polished Aluminium Air-Cleaner BY15320 Billet Specialties Small Oval Ball-Milled Polished Aluminium Air-Cleaner Billet Specialties Small Oval Crossed-Flags Polished Aluminium A/Cleaner BY15327 Billet Specialties Small Oval Crossed-Flags Polished Aluminium Air-Cleaner Edelbrock Pro-Flo Triangular Chrome Air Cleaner The signtaure series triangular air-cleaner is a style with a shape reminiscent of the muscle car era. This triangular air cleaner comes with a high quality 2-1/2 washable pre-oiled cotton gauze filter for excellent filtration. Comes with PCV connection & wing nut. A mounting stud is available under number KIT800. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 86mm. The wing nut is clear of the top a further 12mm. Chrome plated steel with Edelbrock on the top. BY1222 Edelbrock Triangular Chrome air cleaner 14-1/8 wide x 13-3/8 long Edelbrock Elite Series Triangular Air Cleaner With Finned Aluminium Top The signtaure series triangular air-cleaner is a style with a shape reminiscent of the muscle car era. This triangular air cleaner comes with a high quality 2-1/2 washable pre-oiled cotton gauze filter for excellent filtration. Comes with PCV connection & wing nut. A mounting stud is available under number KIT800. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 80mm. The wing nut is clear of the top a further 12mm. finned Aluminium top with Edelbrock on the top. BY4222 Edelbrock Triangular Elite series air cleaner 14-1/8 wide x 13-3/8 long 126.4` Ford Racing Cobra Air Cleaner-Aluminium Top This oval aircleaner assy, looks good under the bonnet of most Cobras. Comes with PCV connection, mounting stud & wing nut. The bottom pan is flat. The element is a replaceable paper element. Fits a 4 barrel carb with the common 5-1/8 top platform. Height required from the carb platform to the top of the air-cleaner is approximately 58mm. The wing nut is clear of the top a further 14mm. Aluminium top with Cobra in raised letters. BYM-9600-C302 Ford Racing Cobra air cleaner 21-1/8 x 10-1/16 aluminium top

5 S7/5 Air Cleaners/Induction & Parts Induction//Spare Parts S7/5 Induction- Air Cleaners Edelbrock Round Chrome Air-Cleaner for 2 Barrel 94 Carb This Edelbrock 94 round air cleaner is designed to work with any 2 barrel 2-5/8 diameter carb. It features a high quality paper element with a triple chrome top & a brilliant shine. The kit includes- Top, base, element, band-clamp & wing nut. Edelbrock 94 air-cleaners are a great way to finish off your carb and inlet manifold installation. BY1202 Round Air-Cleaner for 94 2 barrel Edelbrock & Triple Deuce set-up 15.91ea Cast from Aluminium, this Street Scoop is then highly polished. Weiand Street Scoop BY7223 Weiand Street Scoop Mr Gasket Hilborn Type Air Scoops- [single & dual carbs] These authentically styled air scoops are made from high quality aluminium castings and are available to fit single & dual carb applications using carburetors with the common 5-1/8 top carb platform. The dual carb scoop features an adjustable base to fit carbs with 7-5/8 to 9-1/4 centre line spacing. Height required from the carb platform to the top of the air cleaner is approx 134mm. These scoops come with a chrome plated inlet screen and bezel and are complete with all necessary mounting hardware. the dual paper filter elements can be replaced. BY5232 Mr Gasket Hilborn type air scoop- 13-5/8 x 9-3/4 single four barrel carb [Pictured] BY5233 Mr Gasket Hilborn type air scoop- 20 x 9-3/4 dual four barrel carbs

6 S7/6 Air Cleaners/Induction & Parts S7/6 Spare Parts Spare & Other Parts Air Cleaner Threaded Rod 5.5 of 1/4 UBC threaded rod to secure the air cleaner on to the carb. [NOT Dominator]. KIT800 Threaded rod for air cleaner 2.30 Air Cleaner Spacers These spacers are designed to raise up the air cleaner from the carb platform. in some applications the spacer may need filing or modifying. BY9340 1/2 spacer [Pictured] 8.23 BY spacer 8.36 Air Cleaner retaining Nut This Moroso nut is a better quality than some of the more simple pressed wingnuts that can be supplied with the a/ cleaner. BY65820 Moroso chrome wing nut PCV Fitting for Underside of Air Cleaner This fitting bolts onto the bottom a/cleaner pan, on the outside. Then it would be connected to a piped rocker cover breather. On the other rocker cover there would be a PCV valve connected to the carb PCV port. With stud. Approx.800 OD. BY PCV connection to a/cleaner 7.18 Replacement Air Cleaner Elements Paper BY1486A 6-1/2 x 1-1/2 for BY BY1485A 6-1/2 x 2-7/16 Street scoop BY /2 Moroso BY x 2-1/8 for BY BY /2 Moroso BYFA x 3 Ford racing BY1480A 14 x 2 for BY BY x 3 [Pictured] BY x 5 Moroso inc stud BYAJG815 Large oval for Cobra filter BY2391 Small oval Air Cleaner Adapters These adapters, are for use in cases where the diameter of the air cleaner platform on the top of the carb, is not 5-1/8. BY2082 Adapter for 4-7/32 carb 7.63 BY6406 Adapter for 3 carb [Pictured] 6.19 Air Cleaner 14 - Stainless Steel Lid The lid on this air cleaner is stainless steel BY A/C with stainless steel lid Projection Air Distribution Ring This simple ring, used on a Projection throttle body, can sometimes increase airflow & horsepower. QJ Air distribution ring Reuseable Foam Filter Shield Fits snugly around a 14 x 5 filter element. Can be cleaned in the sink or washing machine. Excellent for off-road applications. can be cut down for 14 x 3. BY Foam filter shield Oilable Cotton High Flow Elements These filters come pre oiled ready to fit. They can be cleaned and re oiled using a cleaning kit. Normally, one would expect to do this once a year. Ideal for larger horsepower engines and/or a contaminated environment. BYE x 2-5/16 element BY x 3 element [Pictured] BY x 4 element K&N Recharger Filter Care Service kit A maintenance sytem, designed to recharge any washable air filter. Completely restores air flow efficiency so your air filter performs like new. BY oz oil / 12oz cleaner K&N X-Stream Air Flow Top Lid Add up to 1000cfm of air flow to your current 14 filter assy, with this cotton based lid assy. Can be cleaned and reoiled. BY X-Stream top Bendy Hose for Breather In some cases this hose can be used to join the piped rocker cover breather and the PCV connection under the air cleaner. BY2917 Breather hose- ID approx

AF neck with black reusable/washable element. Replacement element AF Cleaner Assembly 5-1/8 (130mm) neck with

AF neck with black reusable/washable element. Replacement element AF Cleaner Assembly 5-1/8 (130mm) neck with AIR CLEANERS AIR FILTER ASSEMBLIES. NOTE: WARRANTY VOID UNLESS SERVICED WITH AEROFLOW CLEANING KIT AF2000-5050 AIR FILTERS Stand out from the crowd with a magnificent looking Aeroflow air cleaner. These

More information

LSX intake manifold RepLacemenRt SeaLS LSX Intake Manifold Replacement Seals 8-pk.

LSX intake manifold RepLacemenRt SeaLS LSX Intake Manifold Replacement Seals 8-pk. 119 146202 146302 LSX intake manifold RepLacemenRt SeaLS 54009-8 LSX Intake Manifold Replacement Seals 8-pk. 120 2151 2171 performer manifolds Performer manifolds are the heart of the Edelbrock line for

More information

Call for product recommendations and to place your order! Remote Oil Filter Hose Kit, Braided Stainless

Call for product recommendations and to place your order! Remote Oil Filter Hose Kit, Braided Stainless Engine Compartment: www.breezeautomotive.com 70080 Remote Oil Filter Hose Kit, Braided Stainless $83.00 This kit connects the remote oil filter to the engine block adapter for cars with shorty headers

More information

ENGINE COMPONENTS Cam keys Pipe plugs Pulleys Timing tapes

ENGINE COMPONENTS Cam keys Pipe plugs Pulleys Timing tapes E-Z INDEX CHROME PLATED ACCESSORIES...2-53 Air cleaners & scoops Dipsticks Lug nuts & wheel accy Timing chain covers Alternator brackets Engine dress-up kits Oil pans Valve covers Breathers Hood pins Software

More information

Early Birds Your GM Muscle Car Headquarters

Early Birds Your GM Muscle Car Headquarters Early Birds Your GM Muscle Car Headquarters 1 800 463 0546 Visit www.early-birds.ca for most up-to-date catalog this copy was generated November 05 2018 Cutlass / Fuel System and Exhaust / Carburetor Air

More information

Carburettor Spacer. Phenolic

Carburettor Spacer. Phenolic 147 Alloy Phenolic Phenolic 5776-1 Holley Squarebore with tube 9138T - 1 / 2 Squarebore 5766-1 Squarebore 5768-2 Squarebore 9139-1 / 2 Squarebore 5767-1 Squarebore 5769-2 Squarebore Alloy Alloy Dual Purpose

More information

INDUCTION Induction 19

INDUCTION Induction 19 Induction 19 Power Stack Filter Dim. B Dim. A Dim. C - Multi-Fit Neck - Fits 3"(76mm), 3 1 /2"(89mm) & 4"(102mm) Pipes The TFI Racing Power Stack above, has the ability to adjust its size by removing the

More information

SEP 28-OCT 5 AIR CLEANER SUPPORT BRACKET FOR EVOLUTION BIG TWIN 1993 & LATER ULTIMA AIR CLEANER ASSEMBLY FOR MIKUNI ROUND RAM-FLO ROUND AIR FILTER

SEP 28-OCT 5 AIR CLEANER SUPPORT BRACKET FOR EVOLUTION BIG TWIN 1993 & LATER ULTIMA AIR CLEANER ASSEMBLY FOR MIKUNI ROUND RAM-FLO ROUND AIR FILTER SEP 28-OCT 5 AIR CLEANER SUPPORT BRACKET FOR EVOLUTION BIG TWIN 1993 & LATER ULTIMA AIR CLEANER ASSEMBLY FOR MIKUNI 42/45/48 Carb CV Carb support bracket & crankcase breather kit for use with any CV air

More information

4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).

4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons). 2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock

More information

AIR & FUEL DELIVERY. Carburetors 2 ALLPONTIAC.COM CUSTOM HIGH PERFORMANCE PONTIAC PARTS (804)

AIR & FUEL DELIVERY. Carburetors 2 ALLPONTIAC.COM CUSTOM HIGH PERFORMANCE PONTIAC PARTS (804) The HO-Series was designed with the Pro-Street and bracket racer in mind featuring clean idle, crisp throttle response, and killer acceleration. A. AED-750HPHO NEW Air & Fuel Delivery, AED 750 HP HO-Series

More information

MUSTANG FLYER MARCH 2018

MUSTANG FLYER MARCH 2018 MUSTANG FLYER MARCH 2018 AJM000 Catalogue of early Mustang parts available. Will help you see if what you want is available 03.60 ACCESSORIES: AJM060 Fender/wing cover 21.62sp BUMPERS AJM002 64-66 Front

More information

Early Birds Your GM Muscle Car Headquarters

Early Birds Your GM Muscle Car Headquarters Early Birds Your GM Muscle Car Headquarters 1 800 463 0546 Visit www.early-birds.ca for most up-to-date catalog this copy was generated September 08 2018 Chevelle / Fuel System and Exhaust / Carburetor

More information

MOPAR PERFORMANCE TERMS AND CONDITIONS

MOPAR PERFORMANCE TERMS AND CONDITIONS FUEL SYTEMS.05 MOPAR PERFORMANCE TERMS AND CONDITIONS NOTICE Federal and many state laws prohibit the removal, modification or rendering inoperative of any part or element of design affecting emissions

More information

EDELBROCK THUNDER SERIES AVS CARBURETORS Part #1801, 1802, 1803, 1804, 1805, 1806, 1812, 1813, 1825, 1826 INSTALLATION INSTRUCTIONS

EDELBROCK THUNDER SERIES AVS CARBURETORS Part #1801, 1802, 1803, 1804, 1805, 1806, 1812, 1813, 1825, 1826 INSTALLATION INSTRUCTIONS EDELBROCK THUNDER SERIES AVS CARBURETORS Part #1801, 1802, 1803, 1804, 1805, 1806, 1812, 1813, 1825, 1826 INSTALLATION INSTRUCTIONS IMPORTANT NOTE: Proper installation is the responsibility of the installer.

More information

ENGINE MISCELLANEOUS

ENGINE MISCELLANEOUS 208 *Oversize shipping / PHONE: 215-348-5568 / FAX: 215-348-0560 ENGINE MISCELLANEOUS 28-011S Oil Filter HOSE KIT, Pr. 55-62 '6' Cylinder 44.00 R 28-011A 'T' FITTING, 6 cyl. oil filter line, oil pressure

More information

USST National Engine Rule Set (2010)

USST National Engine Rule Set (2010) USST National Engine Rule Set (2010) The USST National Series combines trucks from many different origins and blends them into a racing class that includes their different features. With the high expense

More information

2019 Street Stock Rules

2019 Street Stock Rules Presented By 2019 Street Stock Rules 1) Car Body and Frame Any stock, production American-made vehicle including Camaro, Firebird and Mustang. Pickups will be allowed 1. Trunk pan may be removed for fuel

More information

2019 PURE STOCK RULES ALL CHANGES/MODIFICATIONS TO THE 2019 PURE STOCK RULES ARE IN RED.

2019 PURE STOCK RULES ALL CHANGES/MODIFICATIONS TO THE 2019 PURE STOCK RULES ARE IN RED. 2019 PURE STOCK RULES ALL CHANGES/MODIFICATIONS TO THE 2019 PURE STOCK RULES ARE IN RED. DRIVERS A. Driver must be at least 14 years of age. Must have Minor release form signed by parent or guardian on

More information

Holley GM LS Gen III & IV Street Single-Plane Intake Manifold Kits

Holley GM LS Gen III & IV Street Single-Plane Intake Manifold Kits Holley GM LS Gen III & IV Street Single-Plane Intake Manifold Kits 300-131 LS3 Street Single-Plane Intake Manifold, Carbureted/TB EFI 300-132 LS1/2/6 Street Single-Plane Intake Manifold, Carbureted/TB

More information

Thunder Bomber 2019 GENERAL

Thunder Bomber 2019 GENERAL Thunder Bomber 2019 GENERAL - Tech man has right to check this every week. 1. No nitrous or traction control. 2. After 3 times of refusing to tear down - you will be disqualified from competing in this

More information

Larry King Law s Langley Speedway 2018 Super Street Division Rules

Larry King Law s Langley Speedway 2018 Super Street Division Rules Larry King Law s Langley Speedway 2018 Super Street Division Rules 1. COMPETING MODELS: A. Any American made 1979 through 1988 two door, coupe with a minimum 108 inch wheelbase. B. Cars must have a full

More information

Larry King Law s Langley Speedway 2018 Grand Stock Division Rules

Larry King Law s Langley Speedway 2018 Grand Stock Division Rules 2018 Grand Stock Division Rules Amendments: Rules are subject to amendments at any time when ample notice has been given to enhance competition 1. COMPETING MODELS: A. Any American made 1979 through 1988

More information

Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: C

Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: C Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-721C 2011-2013 MINI Cooper S L4-1.6L SEE NOTE* 2011-2013 MINI Clubman S L4-1.6L SEE NOTE* 2011-2013 MINI Cooper

More information

This is my most popular Small Block Ford 347 Stroker Engine Combination

This is my most popular Small Block Ford 347 Stroker Engine Combination This is my most popular Small Block Ford 347 Stroker Engine Combination If you are trying to buy the most power with reliable parts for the least money, this is what I have come up with. The cast steel/iron

More information

Camaro. Retail. Edition. D Classic & Automotive R. Air Cleaner. Retail. Catalog. The nation's largest complete source for Camaro parts.

Camaro. Retail. Edition. D Classic & Automotive R. Air Cleaner. Retail. Catalog. The nation's largest complete source for Camaro parts. Retail ir leaner amaro Retail atalog dition D lassic & utomotive R The nation's largest complete source for amaro parts. 2 D & R lassic utomotive amaro atalog R ir leaner ontents 2018 Section update 8-21-2018

More information

EDELBROCK THUNDER SERIES AVS CARBURETORS Part #1801, 1802, 1803, 1804, 1805, 1806, 1812, 1813, 1825, 1826 INSTALLATION INSTRUCTIONS

EDELBROCK THUNDER SERIES AVS CARBURETORS Part #1801, 1802, 1803, 1804, 1805, 1806, 1812, 1813, 1825, 1826 INSTALLATION INSTRUCTIONS EDELBROCK THUNDER SERIES AVS CARBURETORS Part #1801, 1802, 1803, 1804, 1805, 1806, 1812, 1813, 1825, 1826 INSTALLATION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation.

More information

HOLLEY DESIGNED & BUILT!

HOLLEY DESIGNED & BUILT! MECHANICAL FUEL PUMPS HOLLEY DESIGNED & BUILT! The Holley line of high output mechanical fuel pumps has been completely redesigned for 2001. Their new aluminum housings save weight and all components have

More information

Camaro. Retail. Edition. D Classic & Automotive R. Air Cleaner. Retail. Catalog. The nation's largest complete source for Camaro parts.

Camaro. Retail. Edition. D Classic & Automotive R. Air Cleaner. Retail. Catalog. The nation's largest complete source for Camaro parts. Retail ir leaner amaro Retail atalog dition D lassic & utomotive R The nation's largest complete source for amaro parts. 2 D & R lassic utomotive amaro atalog R ir leaner ontents 2017 Section update 8-02-2017

More information

The All-New BIG97 Tri-Power. In Detail.

The All-New BIG97 Tri-Power. In Detail. The All-New BIG97 Tri-Power. In Detail. The all-new Stromberg BIG97. On the outside, it s Genuine 97 all the way. But on the inside, we re talking 250cfm, new improved fuel circuits, ported distributor

More information

CHARGER 2017 RULES & REGULATIONS Revised 1/22/17

CHARGER 2017 RULES & REGULATIONS Revised 1/22/17 CHARGER 2017 RULES & REGULATIONS Revised 1/22/17 IMPORTANT NOTE: Applications for NASCAR License may be obtained from the Pit Steward at the sign -in-window or at the speedway office during regular business

More information

Under the Hood SECTION IN THIS SECTION: FIREWALL HOOD HARDWARE VALVE COVERS INSULATION

Under the Hood SECTION IN THIS SECTION: FIREWALL HOOD HARDWARE VALVE COVERS INSULATION Ask anyone who owns one of these classic cars and they will tell you that how the car looks under the hood is just as important as how it looks inside and out. In the under the hood section you will find

More information

Holley Ford 351W Hi-Ram Modular Intake Manifold Kits

Holley Ford 351W Hi-Ram Modular Intake Manifold Kits Holley Ford 351W Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-241 Hi-Ram, 1 x 95mm LS Throttle Body (longitudinal mount) w/ port EFI provisions & fuel

More information

FEATURE ARTICLE from Hemmings Muscle Machines

FEATURE ARTICLE from Hemmings Muscle Machines AUTO CLASSIFIEDS CLASSIC CARS FOR SALE CLASSIFIEDS Home Classifieds My Hemmings Publications Research Store Directory Forums Downloads About Us Search All Classifieds Members: Log in New User? Register

More information

Holley 390 cfm 4 barrel 4160 Carburetor

Holley 390 cfm 4 barrel 4160 Carburetor S6/1 S6/1 CARBURETORS/FUEL INJECTION/FUEL PUMPS/PARTS CARBURETORS-New! Vacuum secondary HOLLEY... S6/1 CARBURETORS-New! STREET AVENGER Vacuum Secondary HOLLEY... S6/2 CARBURETORS-New! Off-Road TRUCK AVENGER

More information

Cylinder Head Comparison Sheet Big Block Mopar

Cylinder Head Comparison Sheet Big Block Mopar Cylinder Head Comparison Sheet Big Block Mopar PowerPort Series Cylinder Heads for Big Block Mopar @.700" Valve Lift PowerPort 240 240cc Street 78cc -profiled 2.190" intake; 1.760" exhaust 334 cfm intake;

More information

Available 14 to 36 GALLONS PER MINUTE

Available 14 to 36 GALLONS PER MINUTE Custom Fuel Injection Systems Custom Injection Spacers New Fuel Pumps "Gear Pumps" Blowers "New and Rebuilt" Blower Restraints Lower Engine Restraints Custom CNC Machining Computech Distributor NecksGen

More information

Thunder Bomber 2018 GENERAL

Thunder Bomber 2018 GENERAL Thunder Bomber 2018 GENERAL - Tech man has right to check this every week. 1. No nitrous or traction control. 2. After 3 times of refusing to tear down - you will be disqualified from competing in this

More information

COMPANY PROFILE PRODUCTS

COMPANY PROFILE PRODUCTS COMPANY PROFILE PRODUCTS Company Profile CFR Performance is a major automotive supplier and distributor of car and truck accessories. We are part of a family owned and operated tradition of automotive

More information

high-flow air filter product brochure

high-flow air filter product brochure high-flow air filter product brochure www.knfilters.com HIGH-FLOW AIR FILTERS Race proven performance Epoxy coated aluminium wire screen protects filter media. For more than 40 years professional race

More information

Air Cleaner. Camaro. Retail Catalog. May Edition. D Classic & Automotive R. The nation's largest complete source for Camaro parts.

Air Cleaner. Camaro. Retail Catalog. May Edition. D Classic & Automotive R. The nation's largest complete source for Camaro parts. May 2009 dition ir leaner amaro Retail atalog D lassic & utomotive R The nation's largest complete source for amaro parts. 2 D & R lassic utomotive amaro atalog ir leaner ontents 2009 R 0004.021.02009

More information

Converting a 1275 Midget to run on a HIF44 carburettor.

Converting a 1275 Midget to run on a HIF44 carburettor. Why go single? Converting a 1275 Midget to run on a HIF44 carburettor. There was a time (in the 1960s) when sports cars had to have twin carburettors. As Midgets and Sprites were sports cars, they were,

More information

P U R E P E R F O R M A N C E HSR42/45/48. S m o o t h b o r e C a r b u r e t o r s

P U R E P E R F O R M A N C E HSR42/45/48. S m o o t h b o r e C a r b u r e t o r s P U R E P E R F O R M A N C E HSR42/45/48 S m o o t h b o r e C a r b u r e t o r s HSR42/45/48 Smoothbore Carburetors Going fast has never been so easy! The number one performance carburetor for Harley-Davidsons

More information

THIS CLASS IS TO REMAIN STOCK APPEARRING WITH ALL COMPONENTS IN STOCK LOCATION

THIS CLASS IS TO REMAIN STOCK APPEARRING WITH ALL COMPONENTS IN STOCK LOCATION SOUTHERN OREGON SPEEDWAY Website: www.sospeedway.com 2013 STREET STOCK RULES THIS CLASS IS TO REMAIN STOCK APPEARRING WITH ALL COMPONENTS IN STOCK LOCATION 1. MODELS: A. American sedans and hardtops. Station

More information

2013 Senoia Raceway Rulebook

2013 Senoia Raceway Rulebook 2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter

More information

Big Block Installation

Big Block Installation Factory Five Racing, Inc. Big Block Installation 427 Shown here with fuel injection. 1 These instructions are designed to supplement the assembly manual where the assembly process is different from the

More information

2018 SEASON MOD 4 DIVISION See General Rules

2018 SEASON MOD 4 DIVISION See General Rules 1188 James D. Hagood Hwy. P.O. Box 1066 South Boston, VA 24592 Office: 434-572-4947 Fax: 434-575-8992 Email: info@southbostonspeedway.com www.southbostonspeedway.com 2018 SEASON MOD 4 DIVISION See General

More information

General Engine Rules Common to all Makes:

General Engine Rules Common to all Makes: NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must

More information

P/N Desctription List Price CC-001 CC-002 Throttle Cable Clamp and Retaining Nut $7.50 CC-003 Carb Ball Stud Kit for Linkage Rods (Pair) $16.

P/N Desctription List Price CC-001 CC-002 Throttle Cable Clamp and Retaining Nut $7.50 CC-003 Carb Ball Stud Kit for Linkage Rods (Pair) $16. CC-001 CC-002 Throttle Cable Clamp and Retaining Nut $7.50 CC-003 Carb Ball Stud Kit for Linkage Rods (Pair) $16.00 CC-004 Max Wedge / Race Hemi Carb Stainless Steel Stud & Wing Nut Assy. $7.00 CC-005

More information

PART NUMBER: MINI Cooper S L4-1.6L SEE * NOTE

PART NUMBER: MINI Cooper S L4-1.6L SEE * NOTE Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-699 2007-2010 MINI Cooper S L4-1.6L SEE * NOTE * NOTE: Legal in California only for racing vehicles which may

More information

INSIDE YOUR HOLLEY CARBURETOR FUEL INLET SYSTEM

INSIDE YOUR HOLLEY CARBURETOR FUEL INLET SYSTEM INSIDE YOUR HOLLEY CARBURETOR The carburetor is quite simply a fuel metering device that operates under the logical and straightforward laws of physics. It has evolved over the years from a very simple

More information

429 (wedge), 460 (CJ/SCJ) V8

429 (wedge), 460 (CJ/SCJ) V8 FORD MANIFOLDS Part # Ford 429 (wedge), 460 (CJ/SCJ) V8 8021 Features High rise/dual plane design Idle-6800 RPM power band Square flange carburetor mounting CARBURETOR RECOMMENDATIONS 0-9015 (750 CFM);

More information

Engine option #1 Nesmith sealed 602 with 4412 Holley 500 cfm two barrel. 1" spacer.030 tolerance. Street Stock Rules

Engine option #1 Nesmith sealed 602 with 4412 Holley 500 cfm two barrel. 1 spacer.030 tolerance. Street Stock Rules Hobby Street Stock Rules (Updated 1/1/2019) 1. All 3300 lbs 2. Remote starter button track supplied at inspection 3. No high performance parts allowed except as stated. 4. Wheel base 108. min. 5. Stock

More information

World Formula TECH MANUAL

World Formula TECH MANUAL World Formula TECH MANUAL Section 1 General Rules 1. Only stock Briggs & Stratton World Formula Model # 124435-8101 will be used in this class except as provided in this Tech manual. All parts will be

More information

Briggs & Stratton Animal TECH MANUAL Version 1.6 Section 1 General Rules cannot Section 2 Required Modifications Section 3 Allowable Modifications

Briggs & Stratton Animal TECH MANUAL Version 1.6 Section 1 General Rules cannot Section 2 Required Modifications Section 3 Allowable Modifications Briggs & Stratton Animal TECH MANUAL Version 1.6 updated 2/ 7 / 2011 Section 1 General Rules 1. Only stock Briggs & Stratton Animal # 124332-8201and 124332-8203 - 01engine will be allowed in this class.

More information

FORD - Cyl Block and Related Parts

FORD - Cyl Block and Related Parts FORD - Cyl Block and Related Parts Ref Description Qty All 302 Qty 351 Qty 351-HP 1 BLOCK ASSEMBLY 1 59-4046 1 59-4047 1 59-4047 2 PLUG - 1½ CUP - BRASS 6 59-4048 6 59-4048 6 59-4048 3 PLUG - OIL PASSAGE

More information

CAUTION: NOT INTENDED FOR STREET USE HOW TO USE THIS CATALOG WE LOVE RACING

CAUTION: NOT INTENDED FOR STREET USE HOW TO USE THIS CATALOG WE LOVE RACING WE LOVE RACING When WIX Filters began making its performancedriven products in 1939, the first Daytona race was still 20 years down the road. In developing the WIX Racing line, WIX engineers have worked

More information

Brute Force Intake System

Brute Force Intake System Brute Force Intake System Equipped with AEM DRYFLOW Filter. No oil required! Installation Instructions for: Part Number 21-8001 1992-1995 Chevy Trailblazer 5.7L V8 1988-1995 Chevy C/K Pickup 5.0L V8 1988-1995

More information

Navy Medium Navy Large Navy X Large Navy XX Large Navy XXX Large

Navy Medium Navy Large Navy X Large Navy XX Large Navy XXX Large WHITE POLO SHIRT PULLOVER FLEECE PULLOVER FLEECE 1/4 ZIP ROUSH MERCHANDISE 401677 Medium 401678 Large 401679 X Large 401680 XX Large ROUSH CREW SHORT SLEEVE T-SHIRT 401681 Navy Medium 401682 Navy Large

More information

2017 FACTORY STOCK RULES

2017 FACTORY STOCK RULES 2017 FACTORY STOCK RULES The Statement: Unless it came on a stock, mass produced vehicle, it is NOT LEGAL UNLESS SPECIFIED HERE! If it came on a stock, mass produced vehicle and it is prohibited here,

More information

2012 Street Stock Rules

2012 Street Stock Rules Rules & Regulations Updated 11/26/11 CHASSIS: 1. Cars must be 1960 or newer, stock passenger type cars. 2. No Commercial vehicles, convertibles, sports cars or Novas allowed. No leaf spring cars. 3. Frame

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: 21-8203 2003-2005 DODGE RAM 1500 Pickup V8-5.7L C.A.R.B. E.O. # D-670 2003-2005 DODGE RAM 2500 Pickup V8-5.7L C.A.R.B.

More information

Flame Arrestor #22389 Hose SB #33454 BB #33477 Elbow SB #33455 BB #32941

Flame Arrestor #22389 Hose SB #33454 BB #33477 Elbow SB #33455 BB #32941 Air Cleaners #20888 #20887 Flame Arrestor #22389 Hose SB #33454 BB #33477 Elbow SB #33455 BB #32941 Grommet SB Steel Valve Cover #33456 SB Alum. Valve Cover #33457 SB Alum. Valve Cover #32942 1968-1972

More information

* * * FOR COMPETITION USE ONLY per US EPA regulations* * * Factory Pipe Bill of Materials 1996-Up 701 SuperJet Limited

* * * FOR COMPETITION USE ONLY per US EPA regulations* * * Factory Pipe Bill of Materials 1996-Up 701 SuperJet Limited * * * FOR COMPETITION USE ONLY per US EPA regulations* * * Factory Pipe Bill of Materials 1996-Up 701 SuperJet Limited Item# Qty. Part Number Part Description 1 1 COMCST0040 B Headpipe - 701 Yamaha all/xir

More information

2017 Thunder Series 602 Thunder Series Rules

2017 Thunder Series 602 Thunder Series Rules 2017 Thunder Series 602 Thunder Series Rules Chassis: 1. Must follow FASTRAK rules. 2. Chassis must be built prior to 2014 Body: 1. Must follow FASTRAK body rules 2. 8 spoiler permitted 3. No 12 side braces

More information

486-7 (1) Required - $24 Each Six Pack Throttle Rods Excellent reproductions of the front and rear throttle rods used on all 340 and 440 Six Pack and

486-7 (1) Required - $24 Each Six Pack Throttle Rods Excellent reproductions of the front and rear throttle rods used on all 340 and 440 Six Pack and 486-7 (1) Required - $24 Each Six Pack Throttle Rods Excellent reproductions of the front and rear throttle rods used on all 340 and 440 Six Pack and Six Barrel applications. These rods connect the center

More information

Colorado National Speedway Rules: Pure Stocks Last Revised: February 1, 2018

Colorado National Speedway Rules: Pure Stocks Last Revised: February 1, 2018 PURE STOCK RULES *** Please refer to General Section for rules and regulations applicable to all divisions*** DRIVER ELIGIBILITY: This is an entry level race division. You (The Driver) must be at an entry

More information

DIMENSIONS MIXER THRTL. SAE HORN OVRAL. BODY OVRAL. BODY FLANGE OF AIR CARB WIDTH DIA. 159 mm (6.250") N/A. 148 mm (1.688") 159 mm (6.

DIMENSIONS MIXER THRTL. SAE HORN OVRAL. BODY OVRAL. BODY FLANGE OF AIR CARB WIDTH DIA. 159 mm (6.250) N/A. 148 mm (1.688) 159 mm (6. DIMENSIONS A B C D E F G H I MIXER FLANG. CTR. TO AIR TO CTR. SAE CTR. BOLT HORN OVRAL. NPT OVRAL. BODY SHAFT OF AIR CARB BODY FLANGE SPACING BORE DIA. WIDTH INLET HEIGHT HEIGHT DIA. HORN 225-94 AT2-6

More information

Illustrated Parts List to

Illustrated Parts List to TYPE NUMBERS 0001 through 0026, 0027 through 0049, 0059 through 0075, 0079 through 0093, 0105 through 0128, 0129 through 0169, 0171 through 0200, 0202 through 0217, 0219 through 0238, 0240 through 0256,

More information

ILLUSTRATED PARTS BOOK 4-Cycle Lawn Edger P-WLE-0799 PWLE0799 PWLE0799.1

ILLUSTRATED PARTS BOOK 4-Cycle Lawn Edger P-WLE-0799 PWLE0799 PWLE0799.1 ILLUSTRATED PARTS BOOK 4-Cycle Lawn Edger P-WLE-0799 PWLE0799 PWLE0799.1 Table of Contents Top Level Assembly... 2 Engine Top Level Assembly... 3 Quill Arm Assembly... 4 Frame Assembly... 5 Fixed Rear

More information

2018 Senoia Raceway Rulebook Late Model Sportsman

2018 Senoia Raceway Rulebook Late Model Sportsman (Formerly B Cadet) All drivers must adhere to the general rules, in addition to the division specific rules set forth below. BODY 1. Stock appearing body may be aluminum or steel. 2. Rear of body may be

More information

2015 RULES Sportsman/Super St./Outlaws

2015 RULES Sportsman/Super St./Outlaws 2015 RULES Sportsman/Super St./Outlaws For Tech Questions: Charlie Rockwell 802-355-8112 Head and neck restraint will be required (Hutchens, Hans, ect.) Safety check list for Loudon a. approved drivers

More information

Location: Stock location for Make / Model / Year. Option 1 Properly Sealed GM 602 Crate Motor in any make car. (Must run 500cfm Holley 2 barrel)

Location: Stock location for Make / Model / Year. Option 1 Properly Sealed GM 602 Crate Motor in any make car. (Must run 500cfm Holley 2 barrel) FACTORY STOCK RULES The Statement: Unless it came on a stock, mass produced vehicle, it is NOT LEGAL UNLESS SPECIFIED HERE! If it came on a stock, mass produced vehicle and it is prohibited here, it is

More information

2019 SK Modified Open Engine Rules Supplement

2019 SK Modified Open Engine Rules Supplement 2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and

More information

A function and style that blends with any vehicle from traditional hot rods, muscle cars, trucks and more. Clayton Machine Works The Next Level TM

A function and style that blends with any vehicle from traditional hot rods, muscle cars, trucks and more. Clayton Machine Works The Next Level TM 1 For more than a decade Clayton Machine Works has been producing high quality automotive parts that bring even the most modest of cars to the next level. With a unique style that forged a new space in

More information

SANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES

SANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES SANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES DRIVER: The minimum age for a driver is fourteen (14), unless approved by two of the following three: race director, tech inspector or promoter. All required

More information

Illustrated Parts List to

Illustrated Parts List to Illustrated Parts List Model Series 176400 to 176499 TYPE NUMBERS 0035, 0049, 0050, 0101, 0103, 0113, 0114, 0115, 0116. FORM MS 0419 9/97 REPLACES FORM MS 0419 5/97 FILE IN SECT. 2 OF SERVICE MANUAL 176400

More information

PLEASE BE SURE YOU HAVE READ AND UNDERSTAND THE GENERAL RULES, SAFETY RULES AND DRIVER SAFETY EQUIPMENT BEFORE CONTINUING.

PLEASE BE SURE YOU HAVE READ AND UNDERSTAND THE GENERAL RULES, SAFETY RULES AND DRIVER SAFETY EQUIPMENT BEFORE CONTINUING. 2017 SPORTSMAN RULES Any rule changes made in 2017 are highlighted in RED. *Speedway Officials shall be empowered to permit minor deviations from any of the specifications herein or impose any further

More information

Wingless Limited Sprint Rules CHASSIS

Wingless Limited Sprint Rules CHASSIS Wingless Limited Sprint Rules CHASSIS 1. Any type of sprint car chassis is allowed that has a minimum of 84 inches and a maximum 90 inches, measured from center of the front hub to the center of the rear

More information

Oil Fill, Breather, and PCV Information For PML Small Block Chevrolet Valve Covers

Oil Fill, Breather, and PCV Information For PML Small Block Chevrolet Valve Covers The information in this document applies to these PML small block Chevy standard perimeter mount valve covers: Part Number 10430, CHEVROLET script lettering and fins Part Number 11026, CORVETTE script

More information

Common Terms Types of Intake Manifolds... 5

Common Terms Types of Intake Manifolds... 5 INDUCTION SYSTEMS Common Terms... 2 Plenum... 2 Helmholtz Resonator... 2 Intake Runners... 2 Carburetor Spacers... 2 Individual Runners (IR)... 2 Tuned Port... 3 Manifold Heat... 3 Venturi... 3 Booster

More information

Local Option 206 Rules Manual Section 1 General Rules 1. Only stock Briggs & Stratton LO206 # engine will be allowed in this class.

Local Option 206 Rules Manual Section 1 General Rules 1. Only stock Briggs & Stratton LO206 # engine will be allowed in this class. Local Option 206 Rules Manual Section 1 General Rules 1. Only stock Briggs & Stratton LO206 # 124332-8201engine will be allowed in this class. o All parts will be stock unaltered Briggs & Stratton Animal

More information

珈沣机械 J &F CATALOGUE-2014 MACHINE AND PARTS EXPORTER AND SUPPLIER. Quality First, Cost reasonable, Goods competitive.

珈沣机械 J &F CATALOGUE-2014 MACHINE AND PARTS EXPORTER AND SUPPLIER. Quality First, Cost reasonable, Goods competitive. 珈沣机械 J F Engineering Machinery Co.,Ltd. www.jiafl.com J &F CATALOGUE-2014 MACHINE AND PARTS EXPORTER AND SUPPLIER Quality First, Cost reasonable, Goods competitive. 1 Wacker Copy BS600 Copy BS52Y Copy

More information

Offered with intake, 2 B-Carbs, velocity stack adapters, distributor and extension, fuel log/lines, and linkage.

Offered with intake, 2 B-Carbs, velocity stack adapters, distributor and extension, fuel log/lines, and linkage. Offered for sale at $7950 + shipping is an extremely rare Mickey Thompson Inline Autolite 2x4 Induction system for FE Ford Big Block. This includes everything pictured in the following eight slides. This

More information

235/245400, , 28N

235/245400, , 28N Models 235/245400, 287000, 28N thru W, 310/312/313700 These carburetors have a fixed high speed main jet with adjustable idle, Fig 183. The different carburetors are identified as LMT 1 and up. The letters

More information

Dual Port Cylinder Covers Can be used on all 1600 based dual port engines.

Dual Port Cylinder Covers Can be used on all 1600 based dual port engines. VW Heater Channel Plays an important role in keeping your engine alive. They create a smooth flow of air around the lower part of the cylinders, for added cooling. Can be used on all fresh air 40hp, 13,

More information

CARBURETTORS FUEL SYSTEMS & INJECTION

CARBURETTORS FUEL SYSTEMS & INJECTION CARBURETTORS Edelbrock 94 Carburettor The Edelbrock 94 two barrel carburettor is intended for nostalgic and period correct hot rods and restorations, providing the most accurate and best performing solution

More information

ENGINE PART # PRICE PART # PRICE Crank holder, C

ENGINE PART # PRICE PART # PRICE Crank holder, C PART # PRICE PART # PRICE CHC $11.00/pr Crank holder, C 48461DA $29.50 Water jacket, H thru 350 46125DA $29.50 Water jacket, M thru 450 10139D $7.25 Crank shaft pin 86624089 $2.50 Crank rod pin, H thru

More information

Spindle Mount Steel Wheel. Valve Stems WHEELS, TIRES & ACCESSORIES. 01

Spindle Mount Steel Wheel. Valve Stems WHEELS, TIRES & ACCESSORIES.   01 Steel Wheels Add beauty, performance, and the appeal of a custom look to your VW Sedan, Bus, or Buggy with these precision made heavy duty wide steel wheels. Wide rims accept larger tires, allowing more

More information

For Sale RWHP 1995 Mustang SVT Cobra

For Sale RWHP 1995 Mustang SVT Cobra For Sale - 800 RWHP 1995 Mustang SVT Cobra 52,000 mile 1995 Mustang Cobra with Rio Red exterior and Black Leather interior. Purchased bone stock by the current owner in December of 2000 with 40,000 miles.

More information

2018 Street Stock Rules

2018 Street Stock Rules 2018 Street Stock Rules JUST BECAUSE IT DOES NOT SAY NO DOES NOT MEAN YOU CAN DO IT! $1000 fine for soaking tires. $100 fine for antifreeze. COMPETING MODELS 1968 and later approved hardtop American manufactured

More information

GASKETS 108-20 108-77 108-2-20 108-69 108-70 108-97 108-67-20 108-40 108-74 108-61 Base Plate Part # Model: Rochester Quadra-Jet Bore Size: 1-3/8" primary 2" secondary Thickness: 5/8" Fuel Bowl Plug Gasket

More information

PERFORMANCE CARBURETOR INSTALLATION AND ADJUSTMENT INSTRUCTIONS

PERFORMANCE CARBURETOR INSTALLATION AND ADJUSTMENT INSTRUCTIONS PERFORMANCE CARBURETOR INSTALLATION AND ADJUSTMENT INSTRUCTIONS Read instructions thoroughly before, during, and after installation. NOTE: This carburetor is for use on Motor Vehicle Applications Only!

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-783C (Gun Metal Gray Finish) 2016 HYUNDAI TUCSON 1.6L TURBO C.A.R.B. E.O# D-670-24 2017 HYUNDAI TUCSON 1.6L TURBO

More information

*** FOR COMPETITION USE ONLY per US EPA regulations *** Factory Pipe Bill Of Materials Yamaha GP1200R

*** FOR COMPETITION USE ONLY per US EPA regulations *** Factory Pipe Bill Of Materials Yamaha GP1200R *** FOR COMPETITION USE ONLY per US EPA regulations *** Factory Pipe Bill Of Materials Yamaha GP1200R Item Qty Part Number Part Description 1 3 COMASM0690 GP1200R Flange assembly 2 1 COMASM0840 GP1200R

More information

PHONE

PHONE PHONE 262-542- 2834 nbrady@crossramconnection.com PRICE LIST EMAIL: nbrady@crossramconnection.com Office Ph. 262-542-2834 / Shop Ph. 262-547-5945 / Fax 262-542-3669 Edition 1 10/08/11 CARBURETOR RESTORATION

More information

BRUTE FORCE INTAKE SYSTEM Equipped with AEM DRYFLOW Filter. No oil required!

BRUTE FORCE INTAKE SYSTEM Equipped with AEM DRYFLOW Filter. No oil required! BRUTE FORCE INTAKE SYSTEM Equipped with AEM DRYFLOW Filter. No oil required! Installation Instructions for: Part Number 21-8103 96-04 Ford Mustang GT Excluding Bullet ADVANCED ENGINE MANAGEMENT INC. 2205

More information

ILLUSTRATED PARTS BOOK 4-Cycle Lawn Edger P-WLE-0799-F2N

ILLUSTRATED PARTS BOOK 4-Cycle Lawn Edger P-WLE-0799-F2N ILLUSTRATED PARTS BOOK 4-Cycle Lawn Edger P-WLE-0799-F2N 1 Table of Contents Top Level Assembly... 3 Engine Top Level Assembly... 4 Frame Assembly... 5 Blade Arm Assembly... 7 Handle Assembly... 9 Engine

More information

MAHONING VALLEY SPEEDWAY 2019 LATE MODEL RULES ALL CARS MEETING THESE RULES & SPECIFICATIONS WILL BE ELIGIBLE TO RACE

MAHONING VALLEY SPEEDWAY 2019 LATE MODEL RULES ALL CARS MEETING THESE RULES & SPECIFICATIONS WILL BE ELIGIBLE TO RACE MAHONING VALLEY SPEEDWAY 2019 LATE MODEL RULES ALL CARS MEETING THESE RULES & SPECIFICATIONS WILL BE ELIGIBLE TO RACE These rules are intended to be a guideline in constructing a car. If the rules do not

More information

ELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150

ELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150 2018 SUPER TRUCKS RULES $1000 fine for tire soaking $100 fine for antifreeze ELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150 HMS Enforcer (Harrington Spec) 2850/1265 lbs with driver 1. Minimum

More information

LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, REGISTERED OR LICENSED FOR USE UPON A HIGHWAY.

LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, REGISTERED OR LICENSED FOR USE UPON A HIGHWAY. Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER:21-8408 2010-2013 TOYOTA Tundra V8-4.6L 2007-2014 TOYOTA Tundra V8-5.7L LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES

More information