CEI JET PIPE SERVO VALVE CATALOG
|
|
|
- Kevin Benson
- 6 years ago
- Views:
Transcription
1 OEM & Replacement Units CEI JET PIPE SERVO VALVE CATALOG
2 JP SERIES Contents Section Page JP Series Configurator 3 JP-5 Series 4 JP-10 Series 6 JP-15 Series 8 JP-20 Series 10 JP-25 Series 12 JP-40 Series 14 CEI Servo Valve Interchange Chart 16 All manufacturers names, symbols and descriptions in this document are used for reference purposes only, and it is not implied that any parts listed is the product of these manufacturers. 2 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
3 JP SERIES CONFIGURATOR Breakdown & Options Model Family JP1 ( gpm) JP5 (.25-5 gpm) JP10 ( gpm) JP15 (.5-15 gpm) JP20 (.5-20 gpm) JP25 (.5-25 gpm) JP40 (.5-40 gpm) Other Rated Flow 1000 psi O = Other Spool Configuration U = Under Lap L = Line to Line Other Torque Motor Type S = Standard I = Intrinsically Safe O = Other Coil Resistance/Rated Current 22/200 = 22 ohm 200 ma 27/100 = 27 ohm 100 ma 40/50 = 40 ohm 50 ma 80/50 = 80 ohm 50 ma 81/40 = 81 ohm 40 ma 250/20 = 250 ohm 20 ma 1000/10 = 1000 ohm 10 ma Other Seal Compound V = Viton E = EPR O = Other System Operating Pressure Actual Operating Pressure from 200 to 5000 psi Special Features N = None S = Special Body A = Aluminum 4 Port A5 = Aluminum 5 Port S = Steel 4 Port S5 = Steel 5 Port O = Other Electrical Connector Type MS = MS3102E-14S-2P PC = PC02H-8-4P Flying Leads Other Electrical Connector Direction C2 C1 P R O = Other Hydraulex Global CEI Jet Pipe Servo Valve Catalog 3
4 JP-5 SERIES Jet Pipe Servo Valve Flow Rates to 5 GPM Form, Fit & Function Interchangeable with Existing Servo Valves Contamination Tolerant Single Orifice Pilot Stage Low Null Leakage High Response Field Interchangeable Pilots, Spools, Sleeves, and Pilot Filters Custom Deadbands and Output Flows Available Standard MS Electrical Connector Performance Specifications System Filtration 25 Micron Recommended Fluid Petroleum Base Temp Range -40 to +250 F Pressure Operating 200 psi to 3000 psi Proof 4500 psi Burst 7500 psi Rated Flow 5 gpm at 1000 psi Pressure Drop Leakage Internal 0.3 gpm at 1000 psi External none Pressure Gain 30% Supply min. at 2% Rated Input Hysteresis 3% max. of Rated Current Threshold 0.2% max. of Rated Current 90 Phase Lag 80Hz -3db Amplitude Ratio 80Hz Rated Current 50, 20, 10 ma Coil Resistance 80, 250, 1000 ohms per coil std. Electrical Connector MS3102E-14S-2P Port O-ring Size MS O-Ring Compound Viton Connector Polarity A+ B- Flow Out Cyl. Port 2 C+ D- Flow Out Cyl. Port 2 4 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
5 JP-5 SERIES Technical Drawings Dimensions are in inches. Tolerances on: Angles ±.5 Decimals.XX ±.03,.XXX ±.010 Hydraulex Global CEI Jet Pipe Servo Valve Catalog 5
6 JP-10 SERIES Jet Pipe Servo Valve Flow Rates to 10 GPM Form, Fit & Function Interchangeable with Existing Servo Valves Contamination Tolerant Single Orifice Pilot Stage Low Null Leakage High Response Field Interchangeable Pilots, Spools, Sleeves, and Pilot Filters Custom Deadbands and Output Flows Available Standard MS Electrical Connector Performance Specifications System Filtration 25 Micron Recommended Fluid Petroleum Base Temp Range -40 to +250 F Pressure Operating 200 psi to 3000 psi Proof 4500 psi Burst 7500 psi Rated Flow 10 gpm at 1000 psi Pressure Drop Leakage Internal 0.3 gpm at 1000 psi External none Pressure Gain 30% Supply min. at 2% Rated Input Hysteresis 3% max. of Rated Current Threshold 0.2% max. of Rated Current 90 Phase Lag 80Hz -3db Amplitude Ratio 80Hz Rated Current 50, 20, 10 ma Coil Resistance 80, 250, 1000 ohms per coil std. Electrical Connector MS3102E-14S-2P Port O-ring Size MS O-Ring Compound Viton Connector Polarity A+ B- Flow Out Cyl. Port 2 C+ D- Flow Out Cyl. Port 2 6 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
7 JP-10 SERIES Technical Drawings Dimensions are in inches. Tolerances on: Angles ±.5 Decimals.XX ±.03,.XXX ±.010 Hydraulex Global CEI Jet Pipe Servo Valve Catalog 7
8 JP-15 SERIES Jet Pipe Servo Valve Flow Rates to 15 GPM Form, Fit & Function Interchangeable with Existing Servo Valves Contamination Tolerant Single Orifice Pilot Stage Low Null Leakage High Response Field Interchangeable Pilots, Spools, Sleeves, and Pilot Filters Custom Deadbands and Output Flows Available Standard MS Electrical Connector Performance Specifications System Filtration 25 Micron Recommended Fluid Petroleum Base Temp Range -40 to +250 F Pressure Operating 200 psi to 3000 psi Proof 4500 psi Burst 7500 psi Rated Flow 10 gpm at 1000 psi Pressure Drop Leakage Internal 0.35 gpm at 1000 psi External none Pressure Gain 30% Supply min. at 2% Rated Input Hysteresis 3% max. of Rated Current Threshold 0.2% max. of Rated Current 90 Phase Lag 60Hz -3db Amplitude Ratio 60Hz Rated Current 50, 20, 10 ma Coil Resistance 80, 250, 1000 ohms per coil std. Electrical Connector MS3102E-14S-2P Port O-ring Size MS O-Ring Compound Viton Connector Polarity A+ B- Flow Out Cyl. Port 2 C+ D- Flow Out Cyl. Port 2 8 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
9 JP-15 SERIES Technical Drawings Dimensions are in inches. Tolerances on: Angles ±.5 Decimals.XX ±.03,.XXX ±.010 Hydraulex Global CEI Jet Pipe Servo Valve Catalog 9
10 JP-20 SERIES Jet Pipe Servo Valve Flow Rates to 20 GPM Form, Fit & Function Interchangeable with Existing Servo Valves Contamination Tolerant Single Orifice Pilot Stage Low Null Leakage High Response Field Interchangeable Pilots, Spools, Sleeves, and Pilot Filters Custom Deadbands and Output Flows Available Standard MS Electrical Connector Performance Specifications System Filtration 25 Micron Recommended Fluid Petroleum Base Temp Range -40 to +250 F Pressure Operating 200 psi to 3000 psi Proof 4500 psi Burst 7500 psi Rated Flow 20 gpm at 1000 psi Pressure Drop Leakage Internal 0.35 gpm at 1000 psi External none Pressure Gain 30% Supply min. at 2% Rated Input Hysteresis 3% max. of Rated Current Threshold 0.2% max. of Rated Current 90 Phase Lag 30Hz -3db Amplitude Ratio 30Hz Rated Current 50, 20, 10 ma Coil Resistance 80, 250, 1000 ohms per coil std. Electrical Connector MS3102E-14S-2P Port O-ring Size MS O-Ring Compound Viton Connector Polarity A+ B- Flow Out Cyl. Port 2 C+ D- Flow Out Cyl. Port 2 10 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
11 JP-20 SERIES Technical Drawings Dimensions are in inches. Tolerances on: Angles ±.5 Decimals.XX ±.03,.XXX ±.010 Hydraulex Global CEI Jet Pipe Servo Valve Catalog 11
12 JP-25 SERIES Jet Pipe Servo Valve Flow Rates to 25 GPM Form, Fit & Function Interchangeable with Existing Servo Valves Contamination Tolerant Single Orifice Pilot Stage Low Null Leakage High Response Field Interchangeable Pilots, Spools, Sleeves, and Pilot Filters Custom Deadbands and Output Flows Available Standard MS Electrical Connector Performance Specifications System Filtration 25 Micron Recommended Fluid Petroleum Base Temp Range -40 to +250 F Pressure Operating 200 psi to 3000 psi Proof 4500 psi Burst 7500 psi Rated Flow 25 gpm at 1000 psi Pressure Drop Leakage Internal 0.60 gpm at 1000 psi External none Pressure Gain 30% Supply min. at 2% Rated Input Hysteresis 3% max. of Rated Current Threshold 0.2% max. of Rated Current 90 Phase Lag 20Hz -3db Amplitude Ratio 20Hz Rated Current 50, 20, 10 ma Coil Resistance 80, 250, 1000 ohms per coil std. Electrical Connector MS3102E-14S-2P Port O-ring Size MS O-Ring Compound Viton Connector Polarity A+ B- Flow Out Cyl. Port 2 C+ D- Flow Out Cyl. Port 2 12 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
13 JP-25 SERIES Technical Drawings Dimensions are in inches. Tolerances on: Angles ±.5 Decimals.XX ±.03,.XXX ±.010 Hydraulex Global CEI Jet Pipe Servo Valve Catalog 13
14 JP-40 SERIES Jet Pipe Servo Valve Flow Rates to 40 GPM Form, Fit & Function Interchangeable with Existing Servo Valves Contamination Tolerant Single Orifice Pilot Stage Low Null Leakage High Response Field Interchangeable Pilots, Spools, Sleeves, and Pilot Filters Custom Deadbands and Output Flows Available Standard MS Electrical Connector Performance Specifications System Filtration 25 Micron Recommended Fluid Petroleum Base Temp Range -40 to +250 F Pressure Operating 200 psi to 3000 psi Proof 4500 psi Burst 7500 psi Rated Flow 40 gpm at 1000 psi Pressure Drop Leakage Internal 0.40 gpm at 1000 psi External none Pressure Gain 30% Supply min. at 2% Rated Input Hysteresis 3% max. of Rated Current Threshold 0.2% max. of Rated Current 90 Phase Lag 20Hz -3db Amplitude Ratio 20Hz Rated Current 50, 20, 10 ma Coil Resistance 80, 250, 1000 ohms per coil std. Electrical Connector MS3102E-14S-2P Port O-ring Size MS O-Ring Compound Viton Connector Polarity A+ B- Flow Out Cyl. Port 2 C+ D- Flow Out Cyl. Port 2 14 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
15 JP-40 SERIES Technical Drawings Dimensions are in inches. Tolerances on: Angles ±.5 Decimals.XX ±.03,.XXX ±.010 Hydraulex Global CEI Jet Pipe Servo Valve Catalog 15
16 JP SERIES Servo Valve Interchange Chart Flow (gpm) Port Circle CEI Atchley Moog Abex Ultra Pegasus Vickers Rexroth Parker JP-5 208A SM A.780 JP A A SM JP A M SM4-20 4WS2E10A BD SP JP A A SM JP A A SM4-20 4WS2E10A BD SP JP SM JP A M SM4-20 4WS2E10A BD SP JP SM SP4-25 4WS2E10A JP A Diamond JP-40* SM JP SM4-40 BD JP SM4-40 BD * Requires Transition Plate 16 Hydraulex Global CEI Jet Pipe Servo Valve Catalog
17 Hydraulex Global - A Recognized Global Leading Provider of High Quality Hydraulic Components Products We Offer Inline Piston Pumps Radial Piston Pumps & Motors Bent Axis Piston Pumps & Motors Fixed Volume Vane Pumps Variable Volume Vane Pumps Gear Pumps Vane Motors Axial Piston Motors High Speed Motors Servo Motors Orbital Motors Directional Valves Flow Control Valves Pressure Control Valves Relief Valves Check Valves Stack Valves Servo Valves Proportional Valves PTOs (Power Take-offs) Cylinders Hydraulex Global Corporate Gratiot Ave Chesterfield, MI Toll Free: Tel: Hydraulex Global - Michigan Tel: sales@ahx1.com Hydraulex Global - Mississippi Tel: sales@metarisusa.com Hydraulex Global - ON, Canada Tel: sales@metaris.com Hydraulex Global - Washington Tel: sales@h-r-d.com Hydraulex Global - Tennessee Tel: sales@flinthydrostatics.com Connect with us: All manufacturers names, symbols and descriptions in this document are used for reference purposes only, and it is not implied that any parts listed is the product of these manufacturers. HGCEIVRev Hydraulex Global. All Rights Reserved.
Komatsu HPV Series Aftermarket Parts Catalog. Parts Lists and Breakdowns
Komatsu HPV Series Aftermarket Parts Catalog www.flinthydrostatics.com Contents HPV Series Section PC200-3/220-3 3 Page PC200-5/220-5 4 PC200-6/220-6 5 PC200-7/220-7 6 PC300-3/400-3 7 PC300-5/400-5 8 PC300-6/400-6
Hyco. Single Acting Telescopic Cylinders. Proven, Dependable Hoist Solutions
Hyco Single Acting Telescopic Cylinders Proven, Dependable Hoist Solutions www.h-r-d.com Take a Closer Look The Performance Difference Start with the best materials and you end up with the highest quality
Hitachi HPV Series Parts Catalog
Hitachi HPV Series Parts Catalog WE CAN ALSO SUPPLY www.hydraulicrepair.net Contents HPV Series Section HPV102 Parts Breakdown 3 Page HPV116 Parts Breakdown 4 HPV145 Parts Breakdown 5 2 Hydraulex 1-800-323-8416
Genuine Metaris PTO INSTALLATION MANUAL. Place in Glove Box After Installation.
Genuine Metaris PTO INSTALLATION MANUAL Place in Glove Box After Installation www.metaris.com Contents General Information Section Page Safety Information 3 Foreword 4 Application Questions 5 Mounting
Genuine Metaris MA10VO/VSO Technical Catalog. Variable Displacement Piston Pump - A10V Series 31 & 52
Genuine Metaris MA10VO/VSO Technical Catalog www.metaris.com Contents General Series MA10VO/VSO Series 31 4 Page Features 4 Technical Data 5 Performance Information 6 Model Code Breakdown 9 Fluid Info
SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi)
Vickers Servo Valves SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi) Released 12/93 651 Introduction Vickers SM4-10/12/15 servovalves can provide system closed loop
SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi)
Vickers Servo Valves SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi) Released 1/94 653 Introduction Vickers SM4-30 servovalves can provide system closed loop control with
Vickers. Servo Valves. SM4-40 Servovalves. Flows to 151 l/min (40 USgpm) Pressures to 350 bar (5000 psi) Released 1/94
Vickers Servo Valves SM4-40 Servovalves Flows to 151 l/min (40 USgpm) Pressures to 350 bar (5000 psi) Released 1/94 654 Introduction Vickers SM4-40 servovalves can provide system closed loop control with
STAR. series. Servo proportional valve Rated flows up to 80 l/m. Features
STAR series 65 Servo proportional valve Rated flows up to 8 l/m Features Maximum operating pressure 15 bar ISO 172-4-4--92 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications
series 2-Stage Servovalve Rated flows up to 80 l/m Features
series 65 2-Stage Servovalve Rated flows up to 8 l/m Features Maximum operating pressure 15 bar ISO 172-4-4--92 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications High
Jet Pipe Servovalves
A Jet Pipe Servovalves PRINCIPLES OF OPERATION Modular torque motor consists of permanent magnets, pole pieces and coils. A movable armature is mounted onto a frictionless pivot spring. A seal between
Jet Pipe Servovalves
Servovalves OVERVIEW Section Page MOOG JET PIPE SERVOVALVES Overview 2 3 Technical Data 4 6 Electrical Characteristics 7 Performance Specs. 8-15 Installation Procedures 16-17 Ordering Information 18-19
STAR. series. 2-Stage Servovalve Rated flows up to 7 l/m. Features
STAR series 2 2-Stage Servovalve Rated flows up to 7 l/m Features Miniature design Maximum operating pressure 315 bar ISO 1372-1-1--92 mounting pattern Internal pilot supply (4 port) Suitable for 3-way
STAR. series. 2-Stage Servovalve Flight Simulation Motion Control. Features
STAR series 99 2-Stage Servovalve Flight Simulation Motion Control Features Maximum operating pressure 14 bar ISO 1372-6-5--92 mounting pattern Internal pilot supply (4 port) Low hysteresis & zero point
series 2-Stage Servovalve Rated flows up to 20 l/m Features
series 46 2-Stage Servovalve Rated flows up to 2 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 441---4 mounting pattern Internal pilot supply (4 port) Suitable for
STAR. series. 2-Stage Servovalve Rated flows up to 20 l/m. Features
STAR series 454 2-Stage Servovalve Rated flows up to 2 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 172-2-2-2 mounting pattern Internal pilot supply (4 port) Suitable
G761 Series Servovalves ISO Size 04
G761 Series Servovalves ISO 137 Size 4 TWO STAGE SERVOVALVES G761 SERIES SERVOVALVES The G761 Series flow control servovalves are throttle valves for 3-, and preferably 4-way applications.they are a high
series 2-Stage Servovalve Rated flows up to 55 l/m Features
series 456 2-Stage Servovalve Rated flows up to 55 l/m Features Standard & high response versions Maximum operating pressure 15 bar Special mounting pattern Internal pilot supply (4 port) Suitable for
G761 Series Servovalves ISO Size 04
G761 Series Servovalves ISO 137 Size 4 TWO STAGE SERVOVALVES G761 SERIES SERVOVALVES The G761 Series flow control servovalves are throttle valves for 3- and preferably 4-way applications.they are a high
STAR. series. 2-Stage Servovalve Rated flows up to 230 l/m. Features
STAR series 89 2-Stage Servovalve Rated flows up to 2 l/m Features Maximum operating pressure 15 bar ISO 172-5-2 mounting pattern Internal pilot supply (4 port) Suitable for -way or 4-way applications
STAR. series. 2-Stage Servovalve Rated flows up to 75 l/m. Features
STAR series 55 2-Stage Servovalve Rated flows up to 75 l/m Features Standard & high response versions Maximum operating pressure 15 bar ISO 172-4-4-2 mounting pattern Internal pilot supply (4 port) Suitable
MCV102A. Pressure Control Servovalve DESCRIPTION FEATURES ORDERING INFORMATION. BLN Issued: October 1998
MCV102A Pressure Control Servovalve Issued: October 1998 DESCRIPTION The MCV102A Pressure Control Servovalve (PCS) is a twostage, fourway, closed loop electrohydraulic servovalve that provides an output
KVF. Flow Control Servovalve (FCS) DESCRIPTION FEATURES ORDERING INFORMATION KVF X X X X X. BLN Issued: February 2004
DESCRIPTION KVF Flow Control Servovalve (FCS) Issued: February 004 The KVF Flow Control Servovalve is a precision servovalve that provides an output flow rate proportional to a low power electrical input
D661-G...A Series Servovalve With Bushing and Integrated 24 Volt Electronics ISO 4401 Size 05
D661-G...A Series Servovalve With Bushing and Integrated 24 Volt Electronics ISO 4401 Size 05 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Performance Specs.
631 Series Servovalves ISO 4401 Size 05
631 Series Servovalves ISO 4401 Size 05 TWO STAGE SERVOVALVES 631 SERIES SERVOVALVES The 631 Series flow control servovalves are throttle valves for 3- and preferably 4-way applications.they are a medium
771, 772, 773 Series Servovalves
771, 772, 773 Series Servovalves TWO STAGE SERVOVALVES 771/2/3 SERIES SERVOVALVES The 771/2/3 Series flow control servovalves are throttle valves for 3- and preferably 4-way applications.they are a high
Specification subject to change without notice! All rights reserved page 1 of 5
Electro Hydraulic Servo Valve Single Stage Hydraulic Symbol Introduction: The HVM 068 is a single stage servo valve in spool and sleeve construction. It is designed special for low pressure applications
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
72 Series Servovalves
72 Series Servovalves TWO STAGE SERVOVALVES 72 SERIES SERVOVALVES The 72 Series flow control servovalves are throttle valves for 3 and preferably 4-way applications.they are a high performance, two-stage
LECTURE 27 SERVO VALVES FREQUENTLY ASKED QUESTIONS
LECTURE 27 SERVO VALVES FREQUENTLY ASKED QUESTIONS 1. Define a servo valve Servo valve is a programmable orifice. Servo valve is an automatic device for controlling large amount of power by means of very
STAR. series. 2-Stage Servovalve Rated flows up to 120 l/m. Features
STR series 11 2-Stage Servovalve Rated flows up to 12 l/m Features Maximum operating pressure 5 bar Electric feedback at main stage spool ISO 441-5-5-4 mounting pattern (NG1) Internal or pilot supply &
Electro-Proportional Terms and Definitions
Electro-Proportional Terms and Definitions Valve Deadband The span of operation where there is no flow or pressure output for some specified range of command Hydraulic Valve Gain The characteristic relating
Vickers. Proportional Valves. EPV10 Series. Proportional Flow Controls. Released 6/95
Vickers Proportional Valves EPV1 Series Proportional Flow Controls Released 6/95 715 Table of Contents Features and Benefits..............................................................................
Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
D680 Series Mini Direct Drive Valve Piloted Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 08
D68 Series Mini Direct Drive Valve Piloted Servo-Proportional Control Valves with Integrated Electronics ISO 441 Size 5 to 8 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical
Proportional Valves. Proportional solenoid valves for pressure and flow control
Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical
Hydraulic Proportional and Closed Loop System Design
Hydraulic Proportional and Closed Loop System Design Neal Hanson Product Manager Industrial Valves and Electrohydraulics 1 Electrohydraulics Contents 1. Electrohydraulic Principles 2. Proportional Valve
Serving the Fluid Power Industry with Flushing Valves Z
Serving the Fluid Power Industry with Flushing Valves Z0011000 Hydraulic Products Supply Manufacture Service Repair A Virginia Corporation since 1979, ServoCon's modern laboratory facilities are located
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
40 l/min (11 GPM) p max
Proportional Directional Control Valve, with Analog Control Electronics PRM2-06 Functional Description Size 06 (D03) Q max 40 l/min (11 GPM) p max 350 bar (5100 PSI) Technical Features Direct acting, proportional
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
Vickers. Two-Stage Flapper Type Servo Valve. Valves. Overhaul Manual SF SF Revised 02/01/74 I-3063-S
Overhaul Manual Vickers Valves Two-Stage Flapper Type Servo Valve SF-0-0-00-0 SF-00-30-00-0 Revised 0/0/7 I-3063-S Table of Contents Section Page I. Introduction.............................................................................................
Schneider Feinwerktechnik
Electro pneumatic mass-flow servo valve Model PVM 064/065 Single stage industrial type PVM 064 PVM 065 Sub plate mounting construction according to DIN ISO 55 99 NG2 Attention: The holes for mounting screw
EFC. Electronically Adjustable Proportional Pressure Compensated Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.
Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C1040 PDFC-4M PDFC-4L
Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4 b a PDFC-4M 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C040 4 3 b a PDFC-4L 3 3 EPRR-0 PROPORTIONAL PRESS. REDUCING/RELIEVING GPM C030 EPRT-08 PROPORTIONAL
CONTINENTAL HYDRAULICS VED03MX
CONTINENTAL HYDRAULICS VED03MX HIGH PERFORMANCE, SERVO-PROPORTIONAL DIRECTIONAL CONTROL VALVE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VED03MX HIGH
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
Proportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
20 l/min (5 GPM) p max. Technical Features
Proportional Directional Control Valve, with Analogue Control Electronics PRM2-0 Functional Description Size 0 (D02) Q max 20 l/min (5 GPM) p max 320 bar (600 PSI) Technical Features Direct acting, proportional
Hydrostatic Drive. 1. Main Pump. Hydrostatic Drive
Hydrostatic Drive The Hydrostatic drive is used to drive a hydraulic motor at variable speed. A bi-directional, variable displacement pump controls the direction and speed of the hydraulic motor. This
Troubleshooting Bosch Proportional Valves
Troubleshooting Bosch Proportional Valves An Informative Webinar Developed by GPM Hydraulic Consulting, Inc. Instructed By Copyright, 2009 GPM Hydraulic Consulting, Inc. TABLE OF CONTENTS Bosch Valves
Check valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
PRM2-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013. Size 06 p max 350 bar Q max 40 L/min
Proportional Directional Control Valves Size 06 p max 50 bar Q max 40 L/min PRM-06 HA 5104 /014 Replaces HA 5104 /01 Compact design with integrated High reliability Simple replacement of the exciting coils
Proportional Control Valves
Proportional Control Valves www.humphrey-products.com ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing
Proportional Control Valves
Proportional Control Valves www.humphrey-products.com ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing
HEC2003/2004 Series Servo Valve System
BULLETIN 10006 Bul. 5.00 GUIDING SYSTEMS October 2011 HEC2003/2004 Series Servo Valve System High response servo valve with spool position feedback signal All components are mounted over the drip pan Servo
Mobile Directional Valve. Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm)
Mobile Directional Valve Product Catalog MDG for Mobile Equipment Flows to 60 I/min (15.8 USgpm) Table of Contents General Information...3 Model code Valve Section...4 Valve Assembly...5 Spool Data...6
Serving the Fluid Power Industry with Servovalves
Serving the Fluid Power Industry with Servovalves Hydraulic Products Supply Manufacture Service Repair A Virginia Corporation since 1979, ServoCon's modern laboratory facilities are located in the heart
Hydraulic Motor Series V12 Variable Displacement
Variable Displacement Catalog 9129 8217-02 June, 1998 GB Content General information 3 V12 cross section 3 Specifications 4 Efficiency diagrams 5 Ordering codes 6 Installation dimensions - ISO version
FLOW CONTROL SERVOVALVES
FLOW CONTOL SEVOVALVES TWO STAGE SEVOVALVES FO INDUSTIAL APPLICATIONS What moves your world OUTLINE J869 Series flow control servovalves are throttle valves for 3 and preferably 4 way applications. They
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control Proportional valves PROPORTIONAL VALVES... - PFRH... -8 EPV...- EPV6...- EPV6A...-7
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
Directional Control Valve
Directional Control Valve Service and Parts Manual powersolutions.danfoss.com Directional Control Valves Service and Parts Manual: Contents SERVICE PARTS Inlet cover... 3-4 Outlet cover... 5-6 Standard
500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
29 160/ Proportional Pressure Relief Valve Model DBE, (Series 5X) Ordering Code DBE 5X Y G24 1/ PSI (350 bar)
Size 10, 25 Proportional Pressure Relief Valve Model DE, (Series 5X)... 5100 PSI (350 bar)... 106 GPM (400 L/min) R 29 160/06.98 R 29 160/06.98 Replaces: 05.94 Operation by means of proportional solenoid
3PC Directional Control Valves
3PC Directional Control Valves Count on the hydraulics expert Caterpillar has been designing hydraulic components and systems for more than 5 years. Our rugged, dependable components make progress possible
Inline Pulse-Tone. Hydraulic Shock Suppressors. Inline Pulse-Tone Shock Suppressors Feature:
Shock Suppressors Feature: Three Bladder Polymers for a Wide Range of Fluids and Temperatures NPT, BSPP, SAE or Split Flange Connections Mounting in Any Position 3000 PSI Models for Water/Chemical Service
D633/D634 SERVOVALVES FOR ELECTROHYDRAULIC POSITION, VELOCITY, PRESSURE OR FORCE CONTROL SYSTEMS WITH HIGH DYNAMIC RESPONSE REQUIREMENTS
SERVOVALVES DIRECT DRIVE SERVOVALVES D633/D634 SERVOVALVES FOR ELECTROHYDRAULIC POSITION, VELOCITY, PRESSURE OR FORCE CONTROL SYSTEMS WITH HIGH DYNAMIC RESPONSE REQUIREMENTS Rev. 2, 04/2009 ISO 4401 SIZES
Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
Vickers. Proportional Valves. EPV16 Series Valvistor Proportional Flow Controls
Vickers Proportional Valves EPV6 Series Valvistor Proportional Flow Controls Vickers, Incorporated, 998 All rights reserved Features and Benefits The EPV (Electro Proportional Valve) series of poppet valves
Technical Information Series 45 G Frame powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series 45 G Frame powersolutions.danfoss.com Contents Frame G Design... 4 Specifications... 5 Performance G74B... 6 Performance G9C... 7 Order code...
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
Series 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
Directional Controls. Air Gap, Solenoid Controlled, Pilot Operated Directional Control Valves DG5S4(L)-10*D(X)-*-*-53. Service Data Vickers I-3625-S
Service Data Vickers Directional Controls Air Gap, Solenoid Controlled, Pilot Operated Directional Control Valves DG5S4(L)-10*D(X)-*-*-53 Revised 9/1/86 I-3625-S Model DG5S4-100D-53 DG5S4-101D-53 DG5S4-102D-53
Proportional Valve.
Proportional Valve Electro-Hydraulic Proportional Pilot Relief Valve Electro-Hydraulic Proportional Flow & Directional Control Valve Electro-Hydraulic Proportional Relief & Flow Control Valve Electronic
Pressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
Pilot Operated Proportional DC Valve Series D*1FW / D*1FT
Characteristics The D*1FW / D*1FT pilot-operated proportional DC valves are available in NG10 (CETOP5), NG16 (CETOP7) and NG25 (CETOP8). These valves (D*1FW) are controlled electrically with the external
Series 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
10 FT./lbs. TORQUE FOR SOLENOID NUT MANUAL OVERIDE PIN GREY PLUG (85.3) 3.36 (74.7) SOLENOID "a" "B" PORT END (3.2) LOCATING PIN.
EDM ELECTRICAL OPTIONS: CODES B, BT or BH NFPA D size (former D) For interface pattern see Mounting Surface section. (.).9 SOL. "b" DIMENSIONS SHOWN : (MILLIMETERS) CHES SOL. "a" /- NPTF -P CONNECTOR OPTION
HIGH PRESSURE FILTERS Series HF2P
HIGH PRESSURE FILTERS Series HF2P Pressures to 3000 psi Flows to 25 GPM Port Size 3/4 APPLICATION HYDAC HF2 Inline High- Pressure Filters are designed for use on hydraulic power units, machine tools, plastics,
Pilot-Operated Proportional DC Valve Series D*1FH
Characteristics The pilot-operated proportional DC valves series of the D*1FH series are high-performance valves with electronic spool position feedback. These valves are available in sizes NG10 to NG2
3/3 servo directional control valve with mechanical position feedback
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical () 426-4 www.cmafh.com 3/3 servo directional control valve with mechanical position feedback Type 4WS2EM...XN...-114
Servo and Proportional Valves
Servo and Proportional Valves Servo and proportional valves are used to precisely control the position or speed of an actuator. The valves are different internally but perform the same function. A servo
Pneutronics. Miniature Proportional Valves. Catalog PND-MPV-001/US January 2007
Pneutronics Miniature Proportional Valves January 2007 Non-Thermally Compensated Proportional Valve HF 200 Miniature Ultra High Flow Proportional Valve HF 200 is a high flow proportional valve that provides
Proportional Pressure Reducing Valve PDM08130
Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional
KRAC KC-600 PLOW PARTS MANUAL
PLOW PARTS MANUAL RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com GENERIC JANUARY 2015 THE INFORMATION
PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED WITH OBE
CONTINENTAL HYDRAULICS VER03MPG PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED WITH OBE VER03MPG - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED WITH OBE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299
Be sure to order the correct number of elements: OLF 15 = 1, OLF 30 = 2, OLF 45 = 3, OLF 60 = 4
Replacement Elements OLF Offline Filters Model Code Micron Rating Media Type Part No. N15DM002 2 Dimicron 01251590 N15DM010 10 Dimicron 03115180 N15DM020 20 Dimicron 00349576 N15DM030 30 Dimicron 03048790
V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback RA 29024/01.05
MP18/SIC & SIO Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright
Directional Control Valve Model Technical Information. Phased Out OUT BASE BKT CYL ROD
BASE BKT CYL ROD OUT IN Directional Control Valve Model 1480 Technical Information History of Revisions Revisions Table of Revisions Date Page Changed Rev. May 2008 - first edition AA 2008 Sauer-Danfoss.
(F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) (EN***)
Service Data Vickers Directional Valves Pilot Operated Directional Valves (F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) - 10
Functional Symbols and Application Notes
Functional Symbols and pplication Notes Model Types KHDG5V Shown Simplified symbol Model Types KHDG5V Shown K()FDG5V symbols identical, but omit pilot-stage LVDTs Simplified symbol T T Detailed symbol
Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
VSD*S -MONITORED DIRECTIONAL CONTROL VALVES
CONTINENTAL HYDRAULICS VSD*S MONITORED DIRECTIONAL CONTROL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VSD*S MONITORED DIRECTIONAL CONTROL VALVES
Proportional directional valve, pilot-operated, with integrated electronics (OBE)
Proportional directional valve, pilot-operated, with integrated electronics (OBE) Type WFCE RE 943 Edition: 7- Replaces: 6- Size 6 5 Component series X Maximum operating pressure 4 bar Maximum flow 5 l/min
RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
OBE (On-Board Electronics) Type Direct Operated Linear Servo Valves (Size: 01 & 03) LSVG-01-EH-*-**-**-10, LSVG-03EH-*-**-**-10/1006
NO. 10 01E September 1, 2010 Public Relations Group Products Publicity Section Sales Administration Department Hamamatsucho Seiwa Bdg., 4-8, Shibadaimon 1-chome, Minato-ku, Tokyo 105-0012, Japan Tel: +81-3-3432-2113
VPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005
Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options: