TECHNICAL INFORMATION

Size: px
Start display at page:

Download "TECHNICAL INFORMATION"

Transcription

1 TECHNICAL INFORMATION Models No. Description MT361 Router L PRODUCT P 1/ 7 CONCEPT AND MAIN APPLICATIONS H Model MT361 is a maktec W class Router developed based on the current Makita brand model RP0. Its features are: New aesthetic design of maktec series model Industrial performance and durability at less expense Dimensions: mm (") Length (L) 256 (10-1/8) Width (W) Height (H) W 110 (4-5/16) 218 (8-5/8) Specification Voltage (V) (for Oceania countries) Current (A) Cycle (Hz) Continuous Rating (W) Input Output Max. Output (W) , Specifications Model No. MT361 No load speed: rpm = min -1 27,000 Collet capacity*1 6mm, 8mm, 6.35mm (1/4"), 9.53mm (3/8") Plunge capacity: mm (") 0 ~ 35 (0 ~ 1-3/8) Switch type Trigger switch Protection against electric shock Double insulation Power supply cord: m (ft) 2.0 (6.6) Weight according to EPTA-Procedure 01/2003*2: kg (lbs) *1 Collet capacity may vary by country. *2 with Dust nozzle 2.7 (6.0) Standard equipment Straight guide... 1 Straight bit 6mm or 6.35mm (1/4")... 1 Wrench Wrench Collet cone 8mm... 1 (for some countries only) Collet cone 6mm or 6.35mm (1/4")... 1 Dust nozzle set... 1 (for Europe only) Note: The standard equipment for the tool shown above may vary by country. Optional accessories No

2 Repair CAUTION: Repair the machine in accordance with Instruction manual or Safety instructions. [1] NECESSARY REPAIRING TOOLS Code No. Description Use for 1R045 Gear Extractor (large) Removing Ball bearing 6203DDW from Armature s drive end 1R269 Bearing Extractor (small) Removing Ball bearing 608ZZ from Armature commutator end [2] LUBRICATIONS Apply the lubricant designated by Makita to the portions pointed with gray triangles to protect parts and product from unusual abrasion. P 2/ 7 Item No Description Portion to lubricate Lubricant Amount a. Pipe R 18 for smooth sliding of Main & s Base Complete b. Pipe L 18 for smooth sliding of Main & s appropriate VG100 Felt (in ) Whole portion volume Felt (in ) Whole portion Fig b 17 a [3]-1. Base complete DISASSEMBLING For disassembling Base complete and Armature etc., has to be separated from. Disassemble (Fig. 2, Fig. 3). Fig Disassemble Lever 47 section. 2. Unscrew seven 4x18 Tapping screws for separating. Flat washer 8 spring 8 M8 Set bolt 4x18 Tapping screw (7pcs.) Lever 47 M5x12 Pan head screw

3 P 3/ 7 Repair [3]-1. Base complete DISASSEMBLING Remove and separate Base complete section from. And disassemble Base section (Fig. 3). Fig Remove main housing from Base section slowly and carefully as it may jump out due to recoil force by spring 10. Pin 10 with brim Retaining ring R-15 spring 10 Base complete section 4. Remove Retaining ring R-15. And then, remove Flat washer 10. Also Pin 10 and spring 10 can be replaced in this step. 5. Remove Pin 10 and spring 10. Retaining ring R-15 Flat washer 10 spring 10 Pin 10 with brim Pin 10 spring 10

4 P 4/ 7 Repair [3]-1. Base complete ASSEMBLING (1) Assemble Base complete section (Fig. 3). (2) Mount the Base complete section to (Fig. 4). Fig Assemble Base complete section to while fitting the Brim portion of Pin 10 to the Rib of. 2. Assemble to Main housing by fastening first group of four 4x18 Tapping screws in diagonal order. Sub housing Rib Pin Brim portion Fasten remaining three 4x18 Tapping screws to completely. (3) Assemble Lever 47 (Fig. 2). Fix Lever 47 and it must lock the base movement within illustrated angle (Fig. 5). Fig. 5. Lever 47 30

5 P 5/ 7 Repair [3]-2. Armature DISASSEMBLING (1) Separate from as illustrated in Fig. 2 and Fig. 3. (2) Disassemble Armature from (Fig. 6). Fig Remove Carbon brush and Brush holder. And then, take out Field together with Armature. 2. Pull out Armature from Field. Field Carbon brush Armature Carbon brush Armature Field (3) Assemble the removed Armature (Fig. 7). Fig Grip Armature shaft at its flat portion with Wrench 13 and remove Collet nut by turning it with Wrench 13. And then, Collet cone is removed from Armature. Wrench 22, gripping Collet nut 4. Remove Ball bearing 6203DDW with 1R045 and 1R346. And remove Flat washer 17. 1R045 1R346 Flat washer 17 Remove Ball bearing 608ZZ with 1R269. 1R269 Collet nut Wrench 13 to grip Armature shaft at its Flat portion Collet cone Ball bearing 6203DDW Ball bearing 608ZZ ASSEMBLING Assemble Armature by taking the reverse step of Disassembling (Fig. 7, Fig. 6). Note: Do not forget to mount Flat washer 17 to Armature at the Drive end (Fan side), before mounting Ball bearing 6203DDW.

6 P 6/ 7 Circuit diagram Fig. D-1 Black White Color index of lead wires' sheath Orange Purple Brush holder (Switch side) side Brush holder (Opposite side of Switch) Field This lead wire is white in stead of blue. This lead wire is black in stead of brown. Terminal block side Noise suppressor is not used for some countries. Noise suppressor Switch For some countries, the lead wires in this portion are connected with Insulated connector in stead of Terminal block. Wiring diagram Fig. D-2 Wiring of Field lead wires Field lead wires have to be fixed with Ribs and Lead wire holders so that they don t loosen around Armature. Field lead wires of side Route the lead wire (black) by Rib A and Rib B and fix between Rib B and Rib C. And connect it to Terminal block. Fix the lead wire (purple) with Lead wire holder and connect to Brush holder (opposite side of Switch). Field lead wires of side Fix the lead wires (black), (orange) between Rib B and Rib C as described below. Connect the lead wire (black) to Switch. And connect the lead wire (orange) to Brush holder (Switch side). Lead wire holder Rib C Rib C To Terminal block Rib A Rib B To Switch Rib B

7 P 7/ 7 Wiring diagram Fig. D-3 Wiring in Main Housing Fig. A Fix Power supply cord to after Field wires are fixed as described in Fig. D-2. Power supply cord Put Noise suppressor into while facing its Lead wires side to the Bottom of. the Bottom of Noise suppressor Lead wires Put Noise suppressor as described in Fig. A, when it is used. Insulated connectors Switch Noise suppressor Terminal block Put Terminal block in this position when it is used. The lead wires are connected with Insulated connector in stead.

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description GA5020C/GA6020C, GA5021C/GA6021C Angle Grinders 125mm (5") /150mm (6") L PRODUCT P 1/10 CONCEPT AND MAIN APPLICATIONS These four models have been developed as

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION PRODUCT P 1/ 11 Model No. Description TM3010C Multi tool L CONCEPT AND MAIN APPLICATIONS Model TM3010C has been developed based on model TM3000C and equipped with the tool-less accessory

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for

More information

TECHNICAL INFORMATION Model No. Description

TECHNICAL INFORMATION Model No. Description TECHNICAL INFORMATION Model No. Description 4114, 4114S Angle Cutter 355mm (14") PRODUCT P 1 / 6 CONCEPT AND MAIN APPLICATIONS Model 4114S is the 355mm (14") version of the current 4112S 305mm (12") Angle

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification GA4030, GA4530, GA5030 Angle Grinders 100mm (4"), 115mm (4-1/2"), 125mm (5") GA4030/ GA4530/ GA5030 are small diameter

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION PRODUCT P 1 / 15 Model No. Description HR2455 Rotary Hammer 24mm (15/16") L W CONCEPT AND MAIN APPLICATIONS Model HR2455 has been developed as a sister tool to Model HR2450, the Makita

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description SP6000 Plunge Cut Circular Saw 165mm (6-1/2") CONCEPT AND MAIN APPLICATIONS Model SP6000 is the first Makita plunge cut saw. Features great conveniences such

More information

TECHNICAL INFORMATION Model No. Description

TECHNICAL INFORMATION Model No. Description TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2450, HR2451, HR2452 24mm (15/16 " ) Rotary Hammer The above models are the advanced version of MAKITA's famous

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description HR3200C, HR3210C, HR3210FCT Rotary Hammer 32mm (1-1/4") CONCEPT AND MAIN APPLICATIONS HR3200C series models have been developed as successor models of HR3000C,

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. Description BHR202 Cordless Combination Hammer CONCEPT AND MAIN APPLICATIONS The subject model features 18V Li-ion Battery and 3 mode selection for ensuring an operator

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model No. Description BHP452 Cordless Percussion Driver Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Model BHP452 has been developed as a cost-competitive 18V

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Model. Description DDF481 (XFD07*1) 18V Cordless driver drill *1 Model number for USA CONCEPT AND MAIN APPLICATIONS Model DDF481 (XFD07*1) is a supreme class cordless driver drill

More information

2" (50MM) ROTARY HAMMER

2 (50MM) ROTARY HAMMER " (50MM) ROTARY HAMMER MODEL HR5000 05-03 75 7 70 80 39 3 4 5 6 7 8 63 58 59 60 6 57 56 55 54 3 53 5 5 4 5 6 7 8 9 0 3 4 4 4 43 44 45 46 47 48 49 50 38 37 40 5 6 7 36 35 34 33 3 3 8 9 30 99 84 85 83 8

More information

MODEL HM A01

MODEL HM A01 BREAKER HAMMER MODEL HM800 06-03 5 4 3 2 0 9 8 7 6 5 4 3 2 6 7 8 36 35 32 3 30 9 20 25 26 24 23 22 2 29 28 27 57 56 55 54 53 52 5 50 49 48 47 46 45 44 43 42 39 4 40 4 38 37 34 33 2 3 A0 23 2 Model HM800

More information

MODEL D 10YB POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL ANGLE DRILL D 10YB SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT

MODEL D 10YB POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL ANGLE DRILL D 10YB SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT MODEL D 10YB POWER TOOLS D ANGLE DRILL D 10YB TECHNICAL DATA AND SERVICE MANUAL LIST No. 0193 Jun. 2000 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications and

More information

rev 0_ UC3530 UC4030 ES-173A

rev 0_ UC3530 UC4030 ES-173A UC50 UC400 1 Armature, Motor Housing, Handle 1 5 4 8 7 6 9 10 11 1 14 7 95 17 16 15 18 19 0 1 4 6 5 8 9 Handle set includes Fig No. 11, 8, & Caution Label. 11 8 0 1 Armature, Motor Housing, Handle Products

More information

Note. Icons. Double Insulation. Variable Speed. Brake. Reversing. . New aesthetic design. Charger: . New aesthetic design. . Charging time: 60min

Note. Icons. Double Insulation. Variable Speed. Brake. Reversing. . New aesthetic design. Charger: . New aesthetic design. . Charging time: 60min TOOL CATALOGUE 1 Index Cordless Driver Drill 1 MT070 1 MT90 3 Cordless Percussion Driver Drill 1 MT071 1 MT903 3 Cordless Impact Driver MT080 1 MT93 Drill MT081 1 MT9 Percussion Drill 3 MT191 5 MT961 3

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E937 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 12 15 (E2) 1 625 5 624 626 627 628 4 6 22 23 24 25 629 630 7A 8 36 37 9 11 10 12 13 2 14 3 15 16 17 18 19 20 21 26 27 28 29

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E945 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2006 10 11 (E1) 1 2 602 603 4 5 6 7 3 8 9 10 11 12 22 23 24 25 26 601 30 31 32 33 604 605 606 607 608 628 601 609 13 14 15 16 17

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E946 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2006 10 11 (E1) 602 603 4 5 6 7 3 8 9 10 11 12 22 23 24 25 26 601 30 31 32 33 604 605 606 607 608 628 13 14 15 16 39 18 19 21 27

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST LIST 0786 ELECTRIC TOOL PARTS LIST SABER SAW Model 1999 12 20 (E1) --- 1 --- PARTS CODE --- 2 --- 1 318-484 WASHER (E) 1 2 318-453 RETAINING RING (E-TYPE) FOR D14 SHAFT 1 3 318-457 WASHER (F) 1 4 878-609

More information

Electric Screwdrivers and Power Supply Operation Manuals

Electric Screwdrivers and Power Supply Operation Manuals Electric Screwdrivers and Power Supply Operation Manuals (February, 08) Clutch Type Torque Auto Control CL-Series SS-Series CL-000, CL-3000, CL-4000, CL-6000, CL-6500 and CL-7000 (NL-Series and Push-to-Start

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E938 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 10 1 (E1) 80 1 15 7 8 9 16 17 18 1 2 3 19 4 20 5 12 6 13 14 13 15 21 11 10 39 40 41 42 43 44 45 46 47 31 38 32 22 33 23 34

More information

Hitachi Circular Saw. Models. 165 mm (6-1/2 ) C 6SS 190 mm (7-1/2 ) C 7SS. LIST No. C 6SS: E519 C 7SS: E520 Jun PRODUCT NAME MARKETING OBJECTIVE

Hitachi Circular Saw. Models. 165 mm (6-1/2 ) C 6SS 190 mm (7-1/2 ) C 7SS. LIST No. C 6SS: E519 C 7SS: E520 Jun PRODUCT NAME MARKETING OBJECTIVE LIST No. C 6SS: E519 C 7SS: E520 Jun. 2009 PRODUCT NAME Hitachi Circular Saw Models 165 mm (6-1/2 ) C 6SS 190 mm (7-1/2 ) C 7SS C MARKETING OBJECTIVE Although our C 6MFA/C 7MFA Circular Saws now available

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E494 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 8 3 (E1) 1 56 2 3 4 5 90 124 11 12 23 34 13 14 15 24 25 26 27 35 36 6 7 16 17 28 29 30 8 9 10 18 19 20 21 31 32 33 50 51

More information

Hitachi. Power Tools SV 13YA SV 13YB SV 13YA SV 13YB RANDOM ORBIT SANDER TECHNICAL DATA AND SERVICE MANUAL MODELS

Hitachi. Power Tools SV 13YA SV 13YB SV 13YA SV 13YB RANDOM ORBIT SANDER TECHNICAL DATA AND SERVICE MANUAL MODELS MODELS SV 13YA SV 13YB Hitachi Power Tools RANDOM ORBIT SANDER SV 13YA SV 13YB TECHNICAL DATA AND SERVICE MANUAL S LIST Nos. SV 13YA: 0356 SV 13YB: 0355 Jun. 2005 SPECIFICATIONS AND PARTS ARE SUBJECT TO

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E942 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND MITER SAW Model 2005 5 20 (E1) 1 2 3 60 61 62 63 64 19 20 21 A 65 47 48 45 49 50 51 6 17 37 46 38 44 23 24 22 25 24 A 26 27 39 28 40

More information

Hitachi Rotary Hammer

Hitachi Rotary Hammer LIST No. F408 Dec. 2009 PRODUCT NAME Hitachi Rotary Hammer Model DH 28PC MARKETING OBJECTIVE This product features a maximum bit diameter of 28 mm, the capability to drill holes in concrete and other hard

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. Description EM2650UH/ EM2650LH, EM2651UH/ EM2651LH Petrol Brushcutter W W PRODUCT P 1/ 14 H CONCEPT AND MAIN APPLICATIONS These four 25.4mL Petrol Brushcutters have been

More information

rev 1_ XML02

rev 1_ XML02 1 DECK, MOTOR, BLADE 2 1 DECK, MOTOR, BLADE 1 1 273675-0 GRIP A 1 1 2 266459-3 TAPPING SCREW 5X25 2 1 3 453250-0 LOCK LEVER 1 1 4 453251-8 LOCK LEVER SUPPORT 1 1 5 233173-6 COMPRESSION SPRING 4 1 1 6 144077-6

More information

G 10SR2 G 12SR2 G 13SR2

G 10SR2 G 12SR2 G 13SR2 MODELS G 10SR2 G 12SR2 G 13SR2 POWER TOOLS DISC GRINDER G 10SR2 G 12SR2 G 13SR2 TECHNICAL DATA AND SERVICE MANUAL G LIST Nos. G 10SR2: E260 G 12SR2: E261 G 13SR2: E262 Feb. 2003 SPECIFICATIONS AND PARTS

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E944 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 73 1 14 1 2 3 4 5 6 7 11 8 9 10 30 30 12 13 17 18 12 14 31 19 15 16 32 33 20 21 22 23 34 35 A 24 25 26 38

More information

DC MOTOR MAINTENANCE ALL ELECTRIC LIFT TRUCKS PART NO SRM 294

DC MOTOR MAINTENANCE ALL ELECTRIC LIFT TRUCKS PART NO SRM 294 DC MOTOR MAINTENANCE ALL ELECTRIC LIFT TRUCKS PART NO. 897076 620 SRM 294 SAFETY PRECAUTIONS MAINTENANCE AND REPAIR When lifting parts or assemblies, make sure all slings, chains, or cables are correctly

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model LIST E925 2001 9 14 (E2) - 2 - - 3 - - 4 - PARTS CODE DESCRIPTION 1 949-258 MACHINE SCREW M6X20 (10 PCS.) 6 2 998-818 TABLE INSERT 2 3 949-215 MACHINE

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E943 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 83 1 14 1 2 3 4 5 6 7 11 8 9 10 39 39 12 13 19 20 12 14 40 21 15 16 41 42 22 23 24 25 17 18 43 44 37 38 A

More information

SPARE PARTS LIST PAGE 1

SPARE PARTS LIST PAGE 1 PAGE 1 001 JM23300009 HEX BOLT M8X16 2 002 JM23300010 SPRING WASHER 8 2 003 JM23300011 FLAT WASHER 8 2 004 JM23300012 RIVING KNIFE 1 005 JM23300013 PAN HEAD SCREW M6X16 1 006 JM23300300 UP BLADE GUARD

More information

Disassembly. 1 Pull off the QUIK-LOK cable from the machine.

Disassembly. 1 Pull off the QUIK-LOK cable from the machine. Special Tools Require Important! Torx TX0 bit 0 0 Screwdriver Torx 0 0 0 Forcing Discs 0 Before beginning the maintenance work, perform an initial check with a high voltage test according to VDE (see chapter

More information

DH 30PC DH 30PB POWER TOOLS HAMMER DRILL DH 30PC/DH 30PB TECHNICAL DATA AND SERVICE MANUAL MODELS

DH 30PC DH 30PB POWER TOOLS HAMMER DRILL DH 30PC/DH 30PB TECHNICAL DATA AND SERVICE MANUAL MODELS MODELS DH 30PC DH 30PB POWER TOOLS D HAMMER DRILL DH 30PC/DH 30PB TECHNICAL DATA AND SERVICE MANUAL LIST No. DH 30PC: E466 DH 30PB: E465 May 2002 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT

More information

DW626 3 HP ROUTER TYPE 1 SEPTEMBER 2003 M.CHADWICK. New Parts. Exploded Drawing. Repair Instructions R11178 E12471 E12472.

DW626 3 HP ROUTER TYPE 1 SEPTEMBER 2003 M.CHADWICK. New Parts. Exploded Drawing. Repair Instructions R11178 E12471 E12472. DW626 3 HP ROUTER TYPE 1 Introduction Exploded Drawing E13635 Bill Of Material DW626-----A Repair Instructions R11178 E12471 E12472 New Parts 63 Wiring Diagram Main Menu E12469 SEPTEMBER 2003 M.CHADWICK

More information

Alternating Current Revolution per minute Protective Earth Ground. Protected from dripping water Fuse Attention, Consult Accompanying Document

Alternating Current Revolution per minute Protective Earth Ground. Protected from dripping water Fuse Attention, Consult Accompanying Document GLOSSARY OF SYMBOLS: (Symbols and descriptions) Alternating Current Revolution per minute Protective Earth Ground Direct Current On (Power connection Off (power to the mains) disconnection from the mains)

More information

THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL. WELLS ENGINE UNIT 230 VOLT Product No. U905, U906, U907, U908

THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL. WELLS ENGINE UNIT 230 VOLT Product No. U905, U906, U907, U908 DENTAL, INC. TECHNICAL BULLETIN U807-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS

More information

20. Install and tighten the cap screws that hold the end frame and field frame together

20. Install and tighten the cap screws that hold the end frame and field frame together 4006-30 19. Fill the oil reservoir in the bearing bore of the end frame with SAE 10 engine oil. Then put the the end frame on the armature shaft. Align the marks on the end frame and field frame and push

More information

MODEL CR 13VA POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL RECIPROCATING SAW CR 13VA SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT

MODEL CR 13VA POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL RECIPROCATING SAW CR 13VA SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT MODEL CR 13VA POWER TOOLS C RECIPROCATING SAW CR 13VA TECHNICAL DATA AND SERVICE MANUAL LIST No. E930 May 2000 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications

More information

LIST NO.E090 ENGINE. ENGINE BRUSH CUTTER Model TCG 24EASP (TANAKA BRAND) (E1)

LIST NO.E090 ENGINE. ENGINE BRUSH CUTTER Model TCG 24EASP (TANAKA BRAND) (E1) LIST E090 ENGINE ENGINE BRUSH CUTTER Model (TANAKA BRAND) 2010 11 18 (E1) 10 26 27 34 1 2 9 3 28 35 3 4 5 6 7 8 12 13 14 15 11 16 20 21 29 30 31 32 33 36 37 38 39 40 A 17 16 18 14 19 B 41 20 22 1 23 24

More information

rev 6_07/17/17 EN4950H

rev 6_07/17/17 EN4950H 1 Shaft, Handle C40 C30 C20 A03 C50 C10 4 38 5 8 222 6 37 9 3 218 1 A04 2 1 Shaft, Handle 1 1 135683-8 TRIMMER HEAD ASS Y 1 1 1 126303-5 TRIMMER HEAD ASS Y 1 1 3 324893-4 SHAFT 1 1 4 195143-2 HANGER SET

More information

MIXER LINE SPARE PARTS MANUAL 2005/2006

MIXER LINE SPARE PARTS MANUAL 2005/2006 MIXER LINE SPARE PARTS MANUAL 2005/2006 Date 03.23.2005 Page 1/2 MIXER Model ME 110 120V ITEM. IDENT. No. DESCRIPTION Q 1 017421627 MOTOR HOUSING 1 2 017421628 COVER HOUSING 1 3 018420908 HOUSING ASSY

More information

Service Manual. Vacuum Cleaner. MODELS S171i / S172i

Service Manual. Vacuum Cleaner. MODELS S171i / S172i Service Manual Vacuum Cleaner MODELS S171i / S172i Table of Contents Page Technical Information 1. Construction and Design 2 1.1 Features 2 1.2 Technical Data 2 1.3 Accessories 3 2. Service and Maintenance

More information

LIST NO. F088 ENGINE. GRASS TRIMMER / BRUSH CUTTER Model TCG 23ECP (TANAKA BRAND) (E1) A 57

LIST NO. F088 ENGINE. GRASS TRIMMER / BRUSH CUTTER Model TCG 23ECP (TANAKA BRAND) (E1) A 57 ENGINE GRASS TRIMMER / BRUSH CUTTER Model (TANAKA BRAND) LIST F088 2016 4 29 (E1) 9 10 11 12 4 13 1 2 5 6 14 15 16 17 18 19 20 3 7 24 21 8 22 48 49 50 51 52 A 57 58 25 26 27 28 29 30 23 53 59 63 61 60

More information

DC 120VA DC 120VA POWER TOOLS DIAMOND CORE DRILL TECHNICAL DATA AND SERVICE MANUAL MODEL

DC 120VA DC 120VA POWER TOOLS DIAMOND CORE DRILL TECHNICAL DATA AND SERVICE MANUAL MODEL MODEL DC 120VA POWER TOOLS D DIAMOND CORE DRILL DC 120VA TECHNICAL DATA AND SERVICE MANUAL LIST No. 0192 Jun. 2000 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E493 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 7 3 (E1) 1 2 3 4 501 502 48 11 12 13 14 15 24 25 26 30 31 32 25 5 6 16 17 18 19 27 28 33 34 35 7 8 20 29 21 9 22 10 23 36

More information

rev 8_12/01/17 EM2650LH EM2652LHN MS C

rev 8_12/01/17 EM2650LH EM2652LHN MS C 1 Throttle Handle 228 227 225 A08 4 226 38 5 38 39 40 41 42 43 46 47 50 44 45 48 49 51 52 55 53 54 2 1 Throttle Handle 1 1 195626-2 LOOP HANDLE SET 1 1 1 1 4 195143-2 HANGER SET 1 1 1 INC. 5 1 5 911233-1

More information

Repair instruction for HYDRAULIC DRIVE UNITS HA1ES / HA \r04eng 0697

Repair instruction for HYDRAULIC DRIVE UNITS HA1ES / HA \r04eng 0697 Repair instruction for HYDRAULIC DRIVE UNITS HA1ES / HA2 Contents list page Safety rules General instructions 1 Operating faults and how to clear them 2 Replacement parts lists 31070 HA1ES 4 31375 HA2

More information

Service Tools. Service and Repair Manual Model 900/950/990 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO.

Service Tools. Service and Repair Manual Model 900/950/990 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO. 12 1 3 2 4 5 8 10 6 7 9 11 14 24 12 13 17 22 29 18 23 25 19 26 15 20 27 21 16 22 33 37 38 32 31 36 30 34 35 40 41 42 43 ITEM PART NO. DESCRIPTION 1 9170 0231 30 LONG ALLEN KEY 2 9170 0737 20 3/32 PIN PUNCH

More information

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 1" D-HANDLE ROTARY HAMMER SERIAL NUMBER G43A See page 6.

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 1 D-HANDLE ROTARY HAMMER SERIAL NUMBER G43A See page 6. 00 0 CATALOG NO. EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). = Component of the 14-4-525 522-21 Maintenance Service Kit SEE PAGE TWO FOR THE PROCEDURE ON CHECKING

More information

HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1")

HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1) TECHNICAL INFORMATION Model. Description HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1") CONCEPT AND MAIN APPLICATIONS HR2610 series models are 26mm (1") combination hammers adapted for

More information

SERVICE PARTS LIST. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 Sawzall STARTING SERIAL NO.

SERVICE PARTS LIST. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 Sawzall STARTING SERIAL NO. Pull both Brush Tubes (25) back before removing or installing the Armature (2) to prevent damage to the commutator. Brush Tube SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

More information

Engine, disassembly and

Engine, disassembly and Page 1 of 13 13-1 Engine, disassembly and assembly Ribbed belt, removing and installing Removing - Remove noise insulation -arrows-. - Remove bumper Repair Manual, Body Exterior, Repair Group 63 - Move

More information

VB 13Y VB 13Y POWER TOOLS PORTABLE REBAR CUTTER/BENDER TECHNICAL DATA AND SERVICE MANUAL MODEL

VB 13Y VB 13Y POWER TOOLS PORTABLE REBAR CUTTER/BENDER TECHNICAL DATA AND SERVICE MANUAL MODEL MODEL VB 13Y POWER TOOLS PORTABLE REBAR CUTTER/BENDER VB 13Y TECHNICAL DATA AND SERVICE MANUAL V LIST No. 0782 Jan. 2000 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT REMARK: Throughout

More information

Instruction Manual. 8,000RPM Right-Angle Handpiece Model: RZ-15X # for

Instruction Manual. 8,000RPM Right-Angle Handpiece Model: RZ-15X # for Instruction Manual for Power Hand 2X controllers and handpieces combine to create the most versatile finishing system in the industry, offering rotary, profiling and belt sanding action. 8,000RPM Right-Angle

More information

RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET

RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET 1 FIGURE A 36 26 25 24 SEE FIGURE B 23 27 20 28 29 30 35 31 37 33 2 10 22 11 12 9 21 13 14 17 16 15 32 18 31 19 34 SEE FIGURE D 8 6 5 4 2

More information

Maintenance Information

Maintenance Information Form 16575334 Edition 1 April 2005 Electric Screwdrivers EL, EP and ET 34V DC Series Maintenance Information Save These Instructions WARNING Maintenance procedures have the potential for severe shock hazard

More information

GXV620K1(QYF) E-12-1 FAN COVER (2)

GXV620K1(QYF) E-12-1 FAN COVER (2) GXV620K1(QYF) E-12-1 FAN COVER (2) 001 16715-ZJ1-840 COVER, FUEL PUMP 1 003 19611-ZJ1-850ZA COVER, FAN (RECOIL STARTER) *NH1 * 1 003 19611-ZJ1-850ZB COVER, FAN (RECOIL STARTER) *R8 * 1 2005207 003 19611-ZJ1-850ZC

More information

LIST NO.E085 ENGINE. ENGINE BRUSH CUTTER Model CG 24EASP (E1)

LIST NO.E085 ENGINE. ENGINE BRUSH CUTTER Model CG 24EASP (E1) LIST E085 (E1) ENGINE ENGINE BRUSH CUTTER Model 2010 10 19 A B 1 2 3 4 5 6 7 8 17 16 18 14 9 10 3 11 13 14 15 16 19 20 22 1 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

More information

1 of 25 9/19/2016 1:07 PM

1 of 25 9/19/2016 1:07 PM 1 of 25 9/19/2016 1:07 PM GX610(VD) E-11 RECOIL STARTER 001 28400-ZE3-W01ZA STARTER ASSY., RECOIL *R8 * 1 002 28410-ZE3-W01ZA CASE COMP., RECOIL STARTER *R8 * 1 003 28421-ZE3-W01 PULLEY, RECOIL STARTER

More information

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 Sawzall

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 Sawzall Pull both Brush Tubes (25) back before removing or installing the Armature (2) to prevent damage to the commutator. Brush Tube SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

More information

Maintenance Information

Maintenance Information 45530136 Edition 1 July 2008 Electric Screwdrivers EL 24V DC Series Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing maintenance on this tool.

More information

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET CRAFTSMAN 0 in. TABLE SAW MODEL NO..890 REPAIR SHEET 7 9 9 8 8 8 0 0 6 0 0 7 6 9 9 8 6 7 6 0 0 6 7 7 7 7 7 9 0 8 7 69 70 66 60 7 76 77 78 67 80 8 68 79 86 6 6 68 67 8 66 9 0 8 8 0 6 7 8 89 90 88 87 9 8

More information

LIST NO. F071 ENGINE ENGINE CUTTER. Model CM 75EBP (E1)

LIST NO. F071 ENGINE ENGINE CUTTER. Model CM 75EBP (E1) ENGINE Model ENGINE CUTTER LIST F071 (E1) 2014 9 12 B A 7 8 1 2 3 6 4 5 5 4 11 12 13 15 16 17 18 19 25 22 24 21 23 20 27 28 20 29 31 32 33 34 30 35 36 37 39 40 41 43 44 46 47 48 49 51 52 53 53 54 55 56

More information

Lokar Cable Operated Sensor Kit Installation Instructions For Ford C4 and C6

Lokar Cable Operated Sensor Kit Installation Instructions For Ford C4 and C6 Lokar Cable Operated Sensor Kit Installation Instructions For Ford C4 and C6 Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Lokar Cable Operated

More information

rev 6_ EN4951SH

rev 6_ EN4951SH 1 Shaft, Handle A02 2 1 Shaft, Handle 1 1 135683-8 TRIMMER HEAD ASSEMBLY 1 INC.251-323 1 2 454270-7 BAND 2 1 3 326530-6 SHAFT 1 1 4 195143-2 HANGER SET 1 INC.5 1 5 911233-1 PAN HEAD SCREW M5X20 1 1 6 143233-5

More information

RK-33 BRUSH CUTTER - FIG 1

RK-33 BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 2 BRUSH CUTTER - FIG 3 BRUSH CUTTER - FIG 1 150 2090198 ANGLE TRANSMISSION 73.38 150-1 2820020 GEAR HOUSING 10.69 150-2 2200029 SPIRAL BEVEL GEAR 7.05 150-3 2200028

More information

Ref Partnumber Description GXV610K1 Serial Numbers ZE3-W01ZB STARTER ASSY., RECOIL *NH1 * ZE3-W01ZP STARTER ASSY.

Ref Partnumber Description GXV610K1 Serial Numbers ZE3-W01ZB STARTER ASSY., RECOIL *NH1 * ZE3-W01ZP STARTER ASSY. GXV610K1(QWA/A) E-11 RECOIL STARTER 001 28400-ZE3-W01ZB STARTER ASSY., RECOIL *NH1 * 1 001 28400-ZE3-W01ZP STARTER ASSY., RECOIL *R280 * 1 2009863 002 28410-ZE3-W01ZB CASE COMP., RECOIL STARTER *NH1 *

More information

VB 16Y VB 16Y POWER TOOLS PORTABLE REBAR CUTTER/BENDER TECHNICAL DATA AND SERVICE MANUAL MODEL

VB 16Y VB 16Y POWER TOOLS PORTABLE REBAR CUTTER/BENDER TECHNICAL DATA AND SERVICE MANUAL MODEL MODEL VB 16Y POWER TOOLS PORTABLE REBAR CUTTER/BENDER VB 16Y TECHNICAL DATA AND SERVICE MANUAL V LIST No. 0790 Sep. 2001 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT REMARK: Throughout

More information

LIST NO.E092 ENGINE. ENGINE BRUSH CUTTER Model TCG 27EASPSL (TANAKA BRAND) (E1a)

LIST NO.E092 ENGINE. ENGINE BRUSH CUTTER Model TCG 27EASPSL (TANAKA BRAND) (E1a) LIST E092 (E1a) ENGINE ENGINE BRUSH CUTTER Model SL (TANAKA BRAND) 2012 02 02 A B 1 2 1 3 4 5 6 7 17 16 18 14 8 9 10 11 12 13 14 15 16 19 20 21 12 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

More information

STARTING SYSTEM LOCATION INDEX [LF]

STARTING SYSTEM LOCATION INDEX [LF] 1. Remove the battery cover. 2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF].) 3. Remove the side cover. (LH) 2007 Mazda MX-5 Miata Sport 2007 ENGINE Starting System -

More information

Hitachi. Power Tools WR 22SA WR 22SA IMPACT WRENCH TECHNICAL DATA AND SERVICE MANUAL MODEL

Hitachi. Power Tools WR 22SA WR 22SA IMPACT WRENCH TECHNICAL DATA AND SERVICE MANUAL MODEL MODEL WR 22SA Hitachi Power Tools IMPACT WRENCH WR 22SA TECHNICAL DATA AND SERVICE MANUAL W LIST No. E707 Mar. 2005 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT REMARK: Throughout this

More information

EY6105-X8. Cordless Drill & Driver CONTENTS SPECIFICATIONS ORDER NO.PTD0411X48C8

EY6105-X8. Cordless Drill & Driver CONTENTS SPECIFICATIONS ORDER NO.PTD0411X48C8 ORDER NO.PTD0411X48C8 Cordless Drill & Driver SPECIFICATIONS CONTENTS Page Page 1 SCHEMATIC DIAGRAM 2 2 WIRING CONNECTION DIAGRAM 2 3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS 3 4 TROUBLESHOOTING GUIDE 7 5 EXPLODED

More information

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D E92 335i/xi (N55 engine) with M-Technic bumper and without stock oil cooler

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D E92 335i/xi (N55 engine) with M-Technic bumper and without stock oil cooler OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D570-0925 APPLICATION 2011-12 E92 335i/xi (N55 engine) with M-Technic bumper and without stock oil cooler Congratulations for being selective enough

More information

rev 6_05/23/18 EN7350SH

rev 6_05/23/18 EN7350SH 1 Shaft, Handle 16 9 7 1 8 6 38 11 15 10 3 2 218 4 A04 37 2 1 Shaft, Handle 1 1 195626-2 LOOP HANDLE SET 1 INC. 6-9,16 1 2 326036-4 SHAFT 1 1 6 346467-1 CLAMP 24 1 1 7 346468-9 CLAMP 33 1 1 8 452841-4

More information

CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET

CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 Figure A 4 5 7 8 0 4 5 7 8 0 5 4 7 8 0 5 4 5 7 8 40 4 4 4 44 45 4 4 47 48 50 4 5 5 4 5 54 5 55

More information

Disc Grinder Model G 18MR G 23MR G 23MRU

Disc Grinder Model G 18MR G 23MR G 23MRU Disc Grinder Model G 18MR G 23MR G 23MRU Handling instructions G23MR NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation.

More information

LIST NO.E073 ENGINE. ENGINE BRUSH CUTTER Model TCG 22EAS (TANAKA BRAND) (E1)

LIST NO.E073 ENGINE. ENGINE BRUSH CUTTER Model TCG 22EAS (TANAKA BRAND) (E1) LIST E073 (E1) ENGINE (TANAKA BRAND) 2010 5 11 ENGINE BRUSH CUTTER Model A B 19 20 21 4 5 13 24 2 3 40 43 45 48 55 56 59 49 50 57 51 54 61 55 56 53 77 67 71 72 73 74 75 76 69 70 65 66 62 6 7 9 11 12 10

More information

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET

CRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET CRAFTSMAN 10 in. TABLE SAW MODEL NO. 1.276670 REPAIR SHEET For Miter Table Assembly, Refer To Figure B For Height/Bevel Adjustment Handwheel, Refer To Figure D For Rip Fence Assembly, Refer To Figure C

More information

DW625. ROUTER. January 2000 P.Pattison. Exploded Drawing. Bill Of Material. Repair Instructions. Introduction R10011 DW625E----A E12153.

DW625. ROUTER. January 2000 P.Pattison. Exploded Drawing. Bill Of Material. Repair Instructions. Introduction R10011 DW625E----A E12153. DW625. ROUTER 4 Introduction Exploded Drawing Bill Of Material Repair Instructions E12153 DW625E----A R10011 Main Menu January 2000 P.Pattison Introduction The bearings used on the Tatry manufactured routers

More information

MODELS FCJ 55VA/FCJ 55

MODELS FCJ 55VA/FCJ 55 MODELS FCJ 55VA/FCJ 55 1. VARIABLE SPEED SWITCH: The switch in the Model FCJ 55VA is equipped with a variable speed control circuit. Through the control circuit, the speed can be controlled within up to

More information

rev 2_07/17/17 EN5950SH MH-246.4DS

rev 2_07/17/17 EN5950SH MH-246.4DS 1 Shaft, Handle 16 9 7 1 8 6 38 11 15 10 3 2 218 4 37 A04 2 1 Shaft, Handle 1 1 195626-2 LOOP HANDLE SET 1 1 INC. 6-9,16 1 2 326036-4 SHAFT 1 1 1 3 142145-9 SHAFT PIPE COMPLETE 1 1 1 4 126281-9 TRIMMER

More information

SPARE PARTS LIST MODEL NO. EBH341U PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO. EBH341U PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 961057-5 Seeger-gyuru S-17 961057-5 1 002 922331-6 Imbuszcsavar M6x20 922331-6 4 003 318421-5 Clutch Case 1 004 451157-4 Spacer 1 005 211338-0 BALL BEARING 1 006 962153-2 Seeger-gyuru R-35 962153-2

More information

TABLE OF CONTENTS. Cordless Impact Driver. Model No. EY7542. Europe Oceania

TABLE OF CONTENTS. Cordless Impact Driver. Model No. EY7542. Europe Oceania Order Number PTD0707X38CE Cordless Impact Driver Model No. EY7542 Europe Oceania TABLE OF CONTENTS PAGE 1 Warning-------------------------------------------------------------- 2 2 Specifications -----------------------------------------------------

More information

Makita Werkzeug Ges.m.b.H. Kolpingstrasse 13, 1230 Wien Tel: 01 / * Fax: 01 / Mail: Web:

Makita Werkzeug Ges.m.b.H. Kolpingstrasse 13, 1230 Wien Tel: 01 / * Fax: 01 / Mail: Web: Kolpingstrasse, 0 Wien Tel: 0 / 66 7 0-0* Fax: 0 / 66 7 0-0 Makita Service Information / Model: EM65UH Seite / (c) 0 by Makita Austria. All Rights Reserved. Änderungen und Irrtümer vorbehalten / MSIO V.0

More information

SERVICE PARTS LIST. 18 Volt Sawzall B58D BULLETIN NO CATALOG NO

SERVICE PARTS LIST. 18 Volt Sawzall B58D BULLETIN NO CATALOG NO Tab Square Groove CATALOG NO. 2620-20 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 Volt Sawzall IMPORTANT Field (22) to be assembled with tapper to back and square groove

More information

PARTS MANUAL. RGV6100/6101 Generators. Models. PUB-GP1201A Rev. 12/99

PARTS MANUAL. RGV6100/6101 Generators. Models. PUB-GP1201A Rev. 12/99 PARTS MANUAL Models RGV6100/6101 Generators PUB-GP1201A Rev. 12/99 RGV6100 & RGV6101-2 - '99-12 GROUP INDEX Group Name Page GENERATOR GROUP - RGV6100... 4 GENERATOR GROUP - RGV6101... 6 FRAME for RECOIL

More information

SERVICE PARTS LIST. 18 Volt Sawzall STARTING SERIAL NO. B58B BULLETIN NO

SERVICE PARTS LIST. 18 Volt Sawzall STARTING SERIAL NO. B58B BULLETIN NO Tab Square Groove CATALOG NO. 2620-20 IMPORTANT Field (22) to be assembled with tapper to back and square groove to the top. Motor Cage (35) must be oriented with tab to the bottom. SERVICE PARTS LIST

More information

RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET

RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET RYOBI 10 in. SLIDING MITER SAW w/laser MODEL NO. TSS100L REPAIR SHEET 119 96 83 1 84 85 116 86 114 92 82 117 113 112 115 97 175 176 120 177 121 1 2 3 122 81 87 128 164 1 80 88 174 114 6 53 163 19 3 141

More information

RICCAR MODEL LRPB8925

RICCAR MODEL LRPB8925 RICCAR MODEL 8925 LRPB8925 BODY GROUP 8925 Key Part No Description Key Part No Description 1 7.8-PLAIN Riccar Filter Bag 31 B224-3614B Motor Cord RBH-6 HEPA Bag 32 B625-0331 Hose Cuff 2 B221-0213 Dust

More information

ELECTRICAL SYSTEM CONTENTS LOCATION OF ELECTRICAL COMPONENTS 5-1 IGNITION SYSTEM 5-3 CHARGING SYSTEM 5-7

ELECTRICAL SYSTEM CONTENTS LOCATION OF ELECTRICAL COMPONENTS 5-1 IGNITION SYSTEM 5-3 CHARGING SYSTEM 5-7 ELECTRICAL SYSTEM CONTENTS LOCATION OF ELECTRICAL COMPONENTS 5- IGNITION SYSTEM 5-3 CHARGING SYSTEM 5-7 STARTER SYSTEM AND SIDE STAND 5- IGNITION INTERLOCK SYSTEM SWITCHES 5-5 LAMP 5-6 BATTERY 5-8 5 FUEL

More information

PARTS LIST ELECTRIC CHARGER 1500

PARTS LIST ELECTRIC CHARGER 1500 PARTS LIST ELECTRIC CHARGER 1500 HANDLE ASSEMBLY - 5293999 120 VOLT - 75 FOOT CORD HANDLE ASSEMBLY - 5296609-240 VOLT - 75 FOOT SHUKO CORD ITEM PART NO. PART DESCRIPTION QTY. 101 5092322 BLACK VINYL COVER

More information

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. Spindle (38) to be assembled

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. Spindle (38) to be assembled Pull Brush Tubes () back before removing or installing the Armature (21) to protect commutator. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 Volt Sawzall CATALOG NO. 2620-20

More information

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS METAL CUTTING SAW SERIAL NUMBER

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS METAL CUTTING SAW SERIAL NUMBER 22-64-0437 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CATALOG NO. METAL CUTTING SAW 6370-20 SERIAL NUMBER A35C BULLETIN NO. 54-40-1627 REVISED BULLETIN DATE 54-40-1626 Sept.

More information

Main Drive Components

Main Drive Components Pipe and Bolt Threading Machine Main Drive Components 0 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () #0 - x /" Screw Motor

More information