JIS symbols used in this catalog are old symbols following JISB0125-1: Refer to JISB0125-1: 2007 or JFPS2011: 2006 for new symbols.
|
|
- Norah Summers
- 6 years ago
- Views:
Transcription
1 symbol s used in this catalog are old symbols following JISB0-: 00. Refer to JISB0-: 007 or JFPS0: 006 for new symbols. Page. Element of symbol. Line and port. Directional control valve. Pressure control valve 9. Speed control valve 9 6. Cylinder and motor 9 7. Power and tank 0 8. Air adjustment component 0 9. Auxiliary components and other components CAD data is available.
2 list Element of symbol (a) element Applications Line Continuous line Broken line Dashed line Double line Circle Large circle Medium circle Small circle Point Half circle Square () Main line () Air supply line to pilot valve () Electric signals line () Pilot operation line () Drain line () Filter () Valve switching position Envelopment line Mechanical connection Energy converter () Instrumentation () Rotation joint () Check valve () Link () Roller () Connection of line () Shaft of roller Pump or actuator whose turning angle is limited () Fluid control components () Driving motor other than electric motor Return line included Others: Indicate the electrical symbol to identify from the piping path Internal pilot External pilot Envelopment line indicating unit with more than one function Rotary shaft, lever, piston rod, etc. Pump, compressor, electric motor, etc. Roller: Put a point on the center. The port intersects vertically with the side. (b) Functional element Applications Equilateral triangle Painted White Arrow display Straight or oblique line Curve Oblique line Other Hydraulics Compressed air and other gas pressure () Linear movement () Fluid flow path and direction in valve () Heat flow direction Rotary motion Variable operation or adjustment method Electric Closed path or closed port Solenoid Fluid energy direction Type of fluid Energy source display Including emission to atmosphere medium Arrow indicates the rotational direction viewed from a free end of a shaft Draw oblique line with appropriate length Such as pump, spring or variable Use the following symbols when AC and DC identification is required: Closed path Port Rectangle Fluid adjustment components () Cushion in () Weight in accumulator () Cylinder () Valve The port intersects with the corner. Filter, drain separator, lubricator, heat exchanger etc. Temperature instruction or adjustment Driving motor Spring Needle valve Refer to No. 7 Two tops is preferable Piston Mnemonic symbol of valve seat of check valve Other Hollow type (large) Hollow type (low) Capsule type Specific operation method Oil tank (ventilation type) Local display of oil tank (ventilation type) () Oil tank (closed type) () Pneumatics tank () Accumulator () Auxiliary gas vessel Refer to No. (a) (c) Mechanical element Rod Rotary shaft Detent Latch direction operation Arrow indication is optional direction operation Arrow indication is optional direction operation Vertical line on notch indicates clamp direction operation shows release method.
3 No. Over center Line and port (a) Line direction operation Connection Lever Pedal Double pedal 6 direction operation (including rotary motion) direction operation (including rotary motion) direction operation (including rotary motion) Cross Not connected Mechanical control plunger 0 direction operation Flexible line Hose (normally connected to movable portion) Variable stroke length limitter direction operation (b) Connecting port Spring direction operation Air vent Performing air vent continuously Roller direction operation Performing air vent in the specified period, then closing. Pull roller Arrow shows operation direction. Indication may be omitted. direction operation Exhaust port Performing air vent by using check, if required. Pneumatics dedicated Without connecting port With connecting port Electrical control Direct electric actuator Single acting Double acting 0 Solenoid, torque motor, etc. direction operation The oblique line can slant downward to the right. direction operation The oblique line can spread upward. Quick joint Rotation joint line lines Connection state Removing state Without check valve With check valve (Self sealant joint) Swivel and rotary joint direction rotation direction rotation Single-acting variable actuator Double acting variable actuator Rotary electric actuator Indirect electric actuator Single acting Double acting 6 7 direction operation Proportional type Force motor etc. direction operation Torque motor direction operation Electric motor * JIS covers pilot operation, but the valve is typically used as a valve, so the transfer symbol (6) and (7) has been used for the electric operation classification. directional control valve (a) No. Manual control Pushbutton Pull-button Push/pull button 0 General symbols when the operation method is not indicated or when the number of operation directions is not specified direction operation direction operation direction operation Pilot operation Direct pilot operation Internal pilot External pilot 0 When different pressurized areas, if required, indicate the number showing are ratio. flow path is provided in inside of device. flow path is provided out of device.
4 No. of port No. Indirect pressure control operation Pressurized operation method Pneumatics pilot Electromagnetic, pneumatics pilot Electromagnetic, pneumatics pilot with manual override (b) Directional control valve basic type Position Status of normal position closed No. A Internal pilot No primary operation Primary operation by single-acting Internal pilot * The valve is typically used as a valve, so transfer symbols in the 0 s are used for transfer symbols. Valve with manual override added to the above operation closed No. of port Solenoid position Status of normal position P/A/B connection P/A/B connection (c) Manual control valve and operator type pushbutton and spring pushbutton and spring No. K L Solenoid position A B Note) Numerals indicate JISB87 (ISO99). open B open pushbutton and spring C closed C pushbutton and spring D open D pull-button, spring A P/B connection E pull-button, spring B P/B connection F Note) Numerals indicate of JISB87 (ISO99). pull-button, spring C pull-button, spring D All ports closed G A All ports closed H B A/B/R connection I C A/B/R connection J D
5 and operator type and operator type lever, spring, A both sides operation pushbutton E lever, spring, B both sides operation pushbutton F lever, spring, C E lever, spring, D F lever with detent A closed center with lever and detent G lever with detent C () Item detent (c) () Item latch (c) Generally, key selector valve closed center with lever and detent H lever with latch A pedal (foot valve) E lever with latch C pedal (foot valve) F pedal, spring, (foot valve) A double pedal (foot valve) 6 E pedal, spring, B double pedal (foot valve) 6 F pedal C double pedal all ports closed with detent 6 G pedal D double pedal all ports closed with detent 6 H double pedal (foot valve for both foot) 6 A (d) Mechanical control valve Note) Numerals indicate JISB87 (ISO99). double pedal (foot valve for both foot) 6 C and operator type pushbutton E plunger A pushbutton F plunger B
6 and operator type and operator type plunger C both sides pilot A plunger D both sides pilot C roller A pilot E roller B pilot F roller C both sides pilot E roller D both sides pilot F single roller A all ports closed both sides pilot G single roller B all ports closed both sides pilot H single roller C ABR connection both sides pilot single roller (e) Pilot operated valve and operator type pilot normally closed pilot normally open D A B both sides pilot A/B/R connection P/A/B connection both sides pilot P/A/B connection both sides pilot * The basic valve s center position operation symbol can be written with a leader line to the basic valve center position in the drawing. Example pilot normally closed C pilot normally open pilot D Indirectly operation normally closed pilot spring and Note) Numerals indicate JISB87 (ISO99). 6
7 (f) Reverse not go shuttle and exhaust valve (g) Solenoid valve Check valve without spring Basic type A (Details and simple symbol) No. a and operator type normally closed A Check valve with spring A normally open B a ' normally closed C Pilot operation check valve A normally open D Valve is closed by external pilot b A C High pressure priority type shuttle valve C c double acting Use this when the relationship to the electric signal need not be indicated. C * * E * Position and functions of valving element is specified. Low pressure priority type shuttle valve F The low pressure inlet is connected to the low-pressure priority output, and the highpressure inlet is closed. d * Pressure and 6 E 6 F Quick exhaust valve * Pressure and * For the pressure and operation symbol, indicate the function element triangle at the edge. e E Note) Numerals indicate JISB87 (ISO99). 7
8 and operator type and operator type double acting double acting E F F 6 E 6 * As stated above, JIS stipulates that this is not required if the relationship to the electrical signal need not be indicated. can be indicated as - -, which is the abbreviation of. PAB spring/pressure centers used together P/A/B connection with manual override all ports closed 0 6 L L G 0 6 * * If the diagram is difficult to read when all symbols are indicated on both ends, separate symbols. double acting 7 E 6 F 6 all ports closed spring/pressure centers 6 H 6 double acting 7 F A/B/R connection used together 6 I 6 all ports block all ports block G H A/B/R connection used together 6 J 6 A/B/R connection I Indirect acting A/B/R pilot manual override 6 K A/B/R connection P/A/B connection J K Indirect acting A/B/R with manual override 6 L Note) Numerals are indication of JISB87 (ISO99). 8
9 and operator type (Proportional control valve) proportional electromagnetic flow control valve A Speed control valve Metering valve Variable metering valve Stop valve Details symbol Simple symbol In simple symbols, operation method and valve's state are not indicated, there is no completely closed status proportional electromagnetic flow control valve (Servo valve) electromagnetic servo control spring/pressure center C G Speed control valve Metering valve With variable needle valve One direction is free flow, while the other direction is controlled flow electromagnetic servo control spring/pressure center 6 H Metering valve with silencer Pressure control valve Relief valve Note) Numerals are indication of JISB87 (ISO99). or general 6 Cylinder and motor Single acting Details symbol Extend type Single rod type Exhaust to atmosphere Pilot operation type relief valve Regulator Nonrelief type Single acting (with spring) () () Single rod type () Rod extended by spring force () Rod retracted by spring force Regulator with relief Double acting () () Single rod type () Double rod type () Pilot operation type regulator Regulator with filter Double acting telescope type Regulator with check valve Cylinder with adjustable stroke (Head end) Cylinder with adjustable stroke (Rod end) Reference: Followed JISB868 names. In JISB098, the head is on the cap side and the rod side is on the head side. Sequence valve Proportional electromagnetic pressure control valve with speed control valve Example of meter-out 9
10 Tie rod with brake Describe the braking method if required. Driving motor (Excluding electric motor) Air tank Cylinder with end lock () * showing how to release () Head end 8 Air adjustment component () () Rod end Note: Nominal values follow JISB Filter () () General symbols () () With magnet Cylinder with switch Specify a and b contact () () With clogging indicator Non-rotating Filter with drain discharger () () Manual discharge () () Automatic emission Rodless Oil mist separator () () Manual discharge Cylinder with valve Example of push type during energizing () () Automatic emission Micro mist separator () () Manual discharge Air motor direction flow direction rotation type () () Automatic emission direction flow direction rotation type () () Deodorization filter Drain discharger () () Manual discharge Oscillator Pneumatics Constant angle direction oscillation type Drawings of arrows to indicate relationship of the shaft rotation direction and flow direction are optional. Air dryer () () Automatic emission 7 Power and tank Heat exchanger Cooler () () Water cooling type (When not showing water line) Hydraulics (power) source Pneumatics (power) source General symbols General symbols () () Water cooling type (When showing water line) Electric motor () () Air cooling type 0
11 Lubricator All volume type Selection type Limit switch Can be indicated as follows if drawing could not be misread: Air ejector Since Z 807 Pneumatics adjustment unit The vertical arrow indicates a discharger. Pneumatics counter Details symbol Details symbol Filter with manual discharge valve Nonrelief type regulator An example of direct type lubricator is indicated. Pressure indicator Simple indicator without measurement Oil mist separator for exhaust air Pressure gauge Noise reduction device Differential pressure gauge Oil injector Thermometer 9 Auxiliary components and other components Galvanoscope Pneumatic - hydraulic converter () () Single acting Flow meter () () Continuous type Booster () When pressure ratio : class fluid () Single acting Integrated flow gauge () () Continuous type Rotation speed gauge Booster valve Pressure ratio : Torque gauge Delay valve Alarm (Example) Indicate with a compound symbol based on the (Refer to JISB0-: 00 and JPAS00.) Note: mark is an original JPAS00 symbol. Use is limited to those indicated. Pressure switch Can be indicated as follows if drawing could not be misread:
Systems. Systems. Pneumatic components for clean room specifications. Reduced wiring control system SAVE NET. Coolant proof component.
Systems Page Pneumatic components for clean room specifications Reduced wiring control system SAVE NET Coolant proof component 4 4 Systems Ozone proof component JIS symbol New product 4G4 Series Index
More informationFor system diagrams and component identification
Pneumatic Symbols For system diagrams and component identification Contents Standards Actuators Basic symbols Valve symbol structure t Functional elements Flowlines Connections Conditioners and plant Pressure
More informationAppendix A. Standard Symbols for Hydraulic Components
Table B.1 Flow lines Appendix A Standard Symbols for Components Continuous flow E Pilot connection L L>10E E Drain connection L L
More informationModule 5: Valves. CDX Diesel Hydraulics. Terms and Definitions. Categories of Valves. Types of Pressure Control Valves
Terms and Definitions Categories of Valves Types of Pressure Control Valves Types and Operation of Pressure Relief Valves Operation of an Unloading Valve Operation of a Sequencing Valve Operation of a
More informationPush buttons are of two types i) Momentary push button ii) Maintained contact or detent push button
ELECTRO-PNEUMATIC Push button switches A push button is a switch used to close or open an electric control circuit. They are primarily used for starting and stopping of operation of machinery. This causes
More informationActuators and directional control valves
Actuators and directional control valves 1. Differentiate between the main types of directional control valves. 2. Demonstrate the function and uses of 3/2 way valve, push button actuated. 3. Demonstrate
More informationSubject: Pneumatic Training Kit with portable Air Compressor
MSME TOOL ROOM: HYDERABAD (CENTRAL INSTITUTE OF TOOL DESIGN) Balanagar, Hyderabad 500 037 TEL.NO.23772747, 23776168 FAX No.0-4023772658 E-mail:citdpurchase@citdindia.org Visit us: www.citdindia.org. TENDER
More informationPneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
More informationO500LE & O500RF OVERVIEW OF READING MB PNEUMATIC DIAGRAMS AND PORT IDENTIFICATION. DaimlerChrysler Australia / Pacific Service & Parts CV
OVERVIEW OF READING MB PNEUMATIC DIAGRAMS AND PORT IDENTIFICATION Understanding Pneumatic Diagrams Port Numbering Mercedes-Benz use a standard method for that allows for easy identification of the pneumatic
More informationTest. What type of cylinder would you use? A. Single-acting cylinder B. Double-acting cylinder Answer:
Test This test allows you to establish whether your basic knowledge of pneumatic controls is sufficient for you to attend the advanced course P or whether you should attend the basic level course P. The
More informationFRL unit consist of Filterations, Regulators and Lubricator unit.
4.1 AIR CONTROL 4.1.1 Fluid Conditioner FRL unit consist of Filterations, Regulators and Lubricator unit. It is also known as Air Service Unit. Primary function is to provide clean air at optimal pressure
More informationPNEUMATIC & HYDRAULIC SYSTEMS
PNEUMATIC & HYDRAULIC SYSTEMS CHAPTER SIX PNEUMATIC SYSTEM DESIGN AND DEVELOPMENT Dr. Ibrahim Naimi Symbols And Standards In Pneumatics The development of pneumatic systems is assisted by a uniform approach
More informationSolenoid valve. Solenoid Coil
Solenoid valve Solenoid valve Solenoid Coil Plunger Valve body A simple solenoid valve consists ofi: Valve body with a plunger the plunger is made of metal Coil an electrical coil if the coil is given
More informationSAP E & C ADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (FOR ITI) (PRODUCT CODE: SAP 20B-I)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B-I) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:-
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More information: Automation Laboratory 1
Table A.1 shows elements found in FluidSIM library with a brief description for each of them. Compressed air supply The compressed air supply provides the needed compressed air. It contains a pressure
More informationInput, Control and Processing elements
PNEUMATIC & HYDRAULIC SYSTEMS CHAPTER FIVE Input, Control and Processing elements Dr. Ibrahim Naimi Valves The function of valves is to control the fluid path or the pressure or the flow rate. Depending
More informationDefinitions of Technical Terms
Definitions of Technical Terms ABSOLUTE A measure having as it s zero point of base the complete absence of the entity being measured. ABSOLUTE PRESSURE A pressure scale with zero point at a perfect vacuum.
More informationFLUID POWER P&IDs. IDENTIFY the symbols used on engineering fluid power drawings for the following components:
FLUID POWER P&IDs Fluid power diagrams and schematics require an independent review because they use a unique set of symbols and conventions. EO 1.11 IDENTIFY the symbols used on engineering fluid power
More informationLesson 5: Directional Control Valves
: Directional Control Valves Basic Hydraulic Systems Hydraulic Fluids Hydraulic Tank Hydraulic Pumps and Motors Pressure Control Valves Directional Control Valves Flow Control Valves Cylinders : Directional
More informationADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (PRODUCT CODE: SAP 20B)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:- The
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL PNEUMATIC CIRCUTS. This work covers part of outcome 3 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PNEUMATIC CIRCUTS This work covers part of outcome 3 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationIndustrial Mechanic (Millwright) Level 3
Industrial Mechanic (Millwright) Level 3 Rev. September 2005 Industrial Mechanic (Millwright) Unit: G5 Prime Movers I Diesel 1 Level: Duration: Three 60 hours Theory: 20 hours Practical: 40 hours Overview:
More informationManual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Hydraulic circuit (Example) AB AB AB X Z P Features hese stacking type multiple control valves are equipped
More informationIntroduction. Pre-Lab
The University Of Jordan School of Engineering Mechatronics Engineering Department Fluid Power Engineering Lab Experiments No.2 Pneumatic Control of a Double-acting Cylinder Objective: Students will be
More informationMini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
More informationChapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
More informationC ap a ter 4 Fluid i d P o P w o e w r St S an a d n a d rd a d n d Sy S m m ol o s L n a gua u g a e e o f o t he h e I ndus u t s ry
Chapter 4 Fluid Power Standards and Symbols Language of the Industry 1 Objectives Describe the meaning of a standard and the importance of standardization in an industry. Identify the primary groups that
More informationSuggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science
Suggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science Pneumatic and Electro-pneumatic components: No. EQUIPMENTS operating
More informationProportional Solenoids
Proportional Solenoids The following electromagnets are examples for proportional solenoids realized in series. Magnetbau Schramme developments are customer-specific. If you are searching for the right
More informationG1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC F COOPERATIVE PATENT CLASSIFICATION MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING (NOTE omitted) ENGINES OR PUMPS F01 MACHINES OR ENGINES IN GENERAL (combustion engines F02; machines
More informationSPECIFICATIONS. Installation arrow must point downward Vertical Valve For top mounting.
PNEUMATIC FLOAT VALVE DESCRIPTION The Magnetic is an air sensor for detecting liquid level inside a vessel. The float mechanism mounted within the vessel operates a ceramic coated magnet. As the float
More informationCH.4 Basic Components of Hydraulic and Pneumatic System/16 M HAP/17522/AE5G
Content : 4.1 Hydraulic and Pneumatic actuators. 10 Marks Hydraulic Actuators - Hydraulic cylinders (single, double acting and telescopic) construction and working, Hydraulic motors (gear and piston type)
More informationElectro - Hydraulics. & Pneumatics. Electro Hydraulic Press. Comparison. Electro Hydraulics. By: Alireza Safikhani
Electro - 9 Hydraulics & Pneumatics 2 Electro Hydraulic Press The hydraulic press is controlled via the electrical control panel. Electrical signals are used to activate the valves in the hydraulic installation.
More information26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
More informationTransmitters: Relay Valve
Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications
More informationSD Bendix E-10PR Retarder Control Brake Valve DESCRIPTION. OPERATION - Refer to Figure 2
SD-03-832 Bendix E-10PR Retarder Control Brake Valve MOUNTING PLATE SUPPLY 4 PORTS ELECTRICAL AUXILIARY DESCRIPTION TREADLE RETARDER CONTROL SECTION EXHAUST DELIVERY 4 PORTS FIGURE 1 - E-10PR RETARDER
More informationDISCUSSION OF FUNDAMENTALS. A hydraulic system can be controlled either manually or automatically:
Unit 1 Introduction to Electrical Control of Hydraulic Systems UNIT OBJECTIVE When you have completed this unit, you will be able to identify the components used for electrical control of the Hydraulics
More informationChapter 6 Pneumatic Logic Sensors and Actuators
Chapter 6: Penumatic logic sensors and actuators -IE337 Chapter 6 Pneumatic Logic Sensors and Actuators 1 Introduction to Pneumatic Why pneumatic? Pneumatic control system is frequently used in building
More informationHYDROMODEL-200. Implements and controls hydraulic and electro-hydraulic circuits. Transparent Hydraulics - Electro-hydraulics
HYDROMODEL-200 Transparent Hydraulics - Electro-hydraulics Hydraulic and electro-hydraulic technology at a glance Implements and controls hydraulic and electro-hydraulic circuits www.smctraining.com training@smctraining.com
More information[You may download this article at: https://fluidsys.org/downloads/ ]
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More informationTWO HAND NON-TIE-DOWN CONTROLS SC SERIES
TWO HAND NON-TIE-DOWN CONTROLS SC SERIES Complete Engineered Solutions Dynamco s SC Series of Two Hand Non-Tie-Down controls offers an engineered and completely assembled control product that can be used
More informationMP18 Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18 Stacking Valve System Technical Information Manual The Drive & Control Company Copyright 1996 Bosch
More informationChapter B-6. Chapter 6. Systems. Festo Didactic TP101
223 Chapter 6 Systems Festo Didactic TP101 224 6.1 Selection and comparison of working and control media To select the working and control media consideration must be given to the following:! The work
More informationLECTURE 15 TO 17 DIRECTIONAL CONTROL VALVES FREQUENTLY ASKED QUESTIONS
LECURE 15 O 17 DIRECIONL CONROL VLVES FREQUENLY SKED QUESIONS 1. Explain briefly the function of directional control valves o o start, stop, accelerate, decelerate and change the direction of motion of
More informationDesign and Fabrication of Sequencing Circuit with Single Double Acting Cylinder
Design and Fabrication of Sequencing Circuit with Single Double Acting Cylinder V.G.Vijaya Department of Mechatronics Engineering, Bharath University, Chennai 600073, India ABSTRACT: This project deals
More informationMarine Technology Pneumatics
Marine Technology Pneumatics for MARINE applications Aventics Marine Applications Pneumatics Ship Controls Valve Control Systems Selective Catalytic Reduction (SCR) Control of two-stroke engines Control
More informationContents. Index. Content
s MS motor - Range... 2 MS motor - Torque module... 3 MS motor - Valving cover... 4 MS motor - Multidisc brake... 5 MS motor - Bearing support... 6 MS motor - Drum brake... 7 Forklift truck drive axle...
More informationDual Axis Hydraulic Joystick Series JH4
Dual Axis Hydraulic Joystick Series JH4 03.JH4-0911 Index of content: Description & technical data: Page 3 Hydraulic circuit diagrams (joysticks): Page 4 Typical hydraulic circuit diagrams (system): Page
More informationMP18/SIC & SIO Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright
More informationBalancing Unit BBS Series
Lightly supporting heavy objects just with air Balancing Unit BBS Series Balancing Unit BBS Series CC-960A Move objects weighing up to 200 kg effortlessly! Balancing Unit BBS-A
More informationGPM Hydraulic Consulting, Inc. P.O. Box 689. Social Circle, GA Hydraulic Consulting, Inc
Hydraulic Consulting, Inc This special promotional CD is to demonstrate how your hydraulic troubleshooting manual can be ordered as an Adobe Acrobat ebook. It can be installed on any computer with the
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationCourseware Sample F0
Fluid Power Pneumatics Courseware Sample 31290-F0 ü FLUID POWER PNEUMATICS COURSEWARE SAMPLE by the Staff of Lab-Volt (Quebec) Ltd Copyright 1999 Lab-Volt Ltd All rights reserved. No part of this publication
More informationMarine Engineering Exam Resource Review of Hydraulics
1. What is Pascal s law? Pressure confined on a confined fluid will transmit the pressure in all directions and act with equal force on all areas at right angles. 2. How does the law pertain to hydraulics?
More informationRF Control of Pneumatic Actuators
RF Control of Pneumatic Actuators In the world of Theater, it is becoming more and more common to see automated scenery set pieces which move under magic powers. One of the easiest ways to implement this
More informationLESSON 2 BASIC CONSTRUCTION AND OPERATION OF HYDRAULIC ACTUATING DEVICES, FLOW CONTROL, AND DIRECTIONAL DEVICES. STP Tasks:
LESSON 2 BASIC CONSTRUCTION AND OPERATION OF HYDRAULIC ACTUATING DEVICES, FLOW CONTROL, AND DIRECTIONAL DEVICES STP Tasks: 552-758-1003 552-758-1071 OVERVIEW LESSON DESCRIPTION: In this lesson you will
More informationThe pneumatic circuit and parts' list needed to perform this operation are shown by Figure C.1.
Introduction In session 1 you have learned about pneumatic systems and their main components. In addition to that your lab instructor has introduced to you how to use FluidSIM software. During this appendix
More informationHydraulic energy control, conductive part
Chapter 2 2 Hydraulic energy control, conductive part Chapter 2 Hydraulic energy control, conductive part To get the hydraulic energy generated by the hydraulic pump to the actuator, cylinder or hydraulic
More informationSHIFT LOCK SYSTEM. Section 12. Lesson Objectives:
Lesson Objectives: 1 Describe the control of the key lock mechanism for the mechanical shift lock system. 2. Describe the control of the shift lock mechanism for the mechanical shift lock systems. 3. Describe
More informationAchieves high specs as a key valve for mid-sized actuators. SOLENOID VALVES The powerful and low current 280 series solenoid valves inherited the feat
Presenting our CAD drawing data catalog VALVES GENERAL CATALOG SOLENOID VALVES SERIES INDEX Characteristics 664 Basic Models and Configuration 665 Specifications 666 Solenoid Valve, Air Piloted Valve Order
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More informationCAB TILT HYDRAULIC SYSTEM
OPERATION, MAINTENANCE and SERVICE INSTRUCTIONS CAB TILT HYDRAULIC SYSTEM WITH POWER-PACKER PUMP, CYLINDERS and LATCHES A division of Actuant Corporation 1-800-745-4142 1 www.powerpackerus.com Notice The
More information2. Hydraulic Valves, Actuators and Accessories. 24 Marks
2. Hydraulic Valves, Actuators and Accessories 24 Marks Co related to chapter 602.2 Describe working principle of various components used in hydraulic & pneumatic systems. 602.3 Choose valves, actuators
More informationMOTOR TERMINAL CONNECTIONS
MOTOR TERMINAL CONNECTIONS Motor Classification Most of the industrial machines in use today are driven by electric motors Motors are classified according to the type of power used (AC or DC) and the motors
More informationElectronic Limit Switch Type
Electronic Limit Switch Type 3738-20 with optional solenoid valve for on/off rotary actuators Application Electronic limit switch for on/off applications to indicate the end position of rotary actuators.
More informationElectrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V. Power consumption In operation At rest For wire sizing
echnical data sheet LH4A.. Linear actuators for operating air control dampers and slide valves in ventilation and air-conditioning systems For air control dampers up to approx. m Actuating force 5 ominal
More informationSection 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:
Section 6.1 Implement Circuit - General System General: TF Configuration... 6.1.3 TB Configurations... 6.1.5 Implement Pump Breakdown... 6.1.6 Operational Description: General... 6.1.7 Compensator Control...
More informationAir Cylinders Drive System Full Stroke Time & Stroke End Velocity. How to Read the Graph
1 Best Pneumatics Air Cylinders Drive System Full Time & End Velocity How to Read the Graph This graph shows the full stroke time and stroke end velocity when a cylinder drive system is composed of the
More informationPage 1 of 22 SECTION 307-01: Automatic Transaxle/Transmission 4R70E/4R75E ASSEMBLY Procedure revision date: 05/29/2009 Transmission Printable View (1554 KB) Special Tool(s) Air Test Plate, Transmission
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationHYDROTRAINER-200 Hydraulics - Electro-hydraulics
HYDROTRAINER-200 Hydraulics - Electro-hydraulics Hydraulics and electro-hydraulics within your reach Why HYDROTRAINER-200? All components included are industrial which guarantees real learning and future
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent P Pushbuttons return
More informationPNEUTRAINER-200 Pneumatics - Electro-pneumatics
PNEUTRAINER-200 Pneumatics - Electro-pneumatics End-to-end solution for training in pneumatics and electro-pneumatics. www.smctraining.com training@smctraining.com 46 Develop the SKILLS... Analysis Troubleshooting
More informationSection 7.1. Wheel Drive Circuit - General System
Section 7.1 Wheel Drive Circuit - General System Simplified Travel Circuit Diagrams: Neutral Controls... 7.1.2 Forward Travel... 7.1.4 Reverse Travel... 7.1.5 General... 7.1.3 Wheel Drive Circuit: General...
More informationCombi valves PN 16 with flanged connections
4 315 ACVATIX Combi valves PN 16 with flanged connections Pressure Independent Combi Valves VPF43.. With integrated pressure differential controller Valve body made of gray cast iron GJL-250 DN 50, DN
More informationNumber Title Year Organization Page
Id Number Title Year Organization Page 365528 B93.1 Dimension Identification Code for Fluid Power Cylinders; Appendices I and II (NFP(A) T3.6.2-1964) R(1994) 365529 B93.2 Fluid Power Systems and Products
More informationSV SOLENOID OPERATED
Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal
More informationTADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m
DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm
More informationPilot Oil Supply Circuit
Pilot Oil Supply Circuit Introduction Pilot system oil output from pilot pump (42) has the following three main functions: 1. To control main pump output. 2. To provide easier operation of control levers.
More informationPneumatic & Hydraulic SYSTEMS
Pneumatic & Hydraulic SYSTEMS CHAPTER EIGHT HYDRAULIC PUMPS AND ACTUATORS Dr. Ibrahim Naimi The higher the discharge pressure, the lower the volumetric efficiency because internal leakage
More informationGPM Hydraulic Consulting, Inc. P.O. Box 689. Social Circle, GA Hydraulic Consulting, Inc
Hydraulic Consulting, Inc This special promotional CD is to demonstrate how your hydraulic troubleshooting manual can be ordered as an Adobe Acrobat ebook. It can be installed on any computer with the
More informationNomenclature... xi Hydraulic Laws, Theorems, and Equations...xii
Nomenclature... xi Hydraulic Laws, Theorems, and Equations...xii 1 Introduction 1.1 Component Design Perspective...1 1.2 Hydraulic Power Evolution...2 1.3 Hydraulic Applications...6 1.4 Component Design
More informationFluid Power Products, Including Aerospace 1999
Fluid Power Products, Including Aerospace 1999 Issued August 2000 MA333N(99)-1 (Formerly Series MA35N) Information about the scope of the survey, methodology, explanation of terms and historical notes
More informationSECTION B1: MACHINE COMPONENTS
SECTION B1: MACHINE COMPONENTS The machine portion of the Injected Metal Assembly system provides the means for: holding, heating and injecting the alloy; distributing and controlling electrical, pneumatic,
More informationRELEASING PRESSURE IN THE HYDRAULIC SYSTEM,
Testing And Adjusting Introduction NOTE: For Specifications with illustrations, make reference to SPECIFICATIONS for 225 EXCAVATOR HYDRAULIC SYSTEM, Form No. SENR7734. If the Specifications are not the
More informationOn-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
More informationCHAPTER 7 VAGABOND S HANDBOOK
CHAPTER 7 AIR PRESSURE/ HYDRAULICS SYSTEMS This chapter provides information on AIR pressure System, Brakes, Suspension, and Hydraulic Leveling Systems. More Details are found in the Maintenance Manual.
More informationCHAPTER 10 STEAM CATAPULTS General
CHAPTER 10 STEAM CATAPULTS 10.1 General The purpose of the steam catapult is to provide a means to safely launch aircraft from carrier decks, day or night, in almost any kind of weather. The steam catapult
More informationMITSUBISHI Industrial Sewing Machine
MITSUBISHI Industrial Sewing Machine TECHNICAL INFORMATION Automatic Undertrimmer, Single-Needle Lookstitch Model LS2-1 1 80 ET-035 MITSUBISHI.. "ELECTRIC CONTENTS 1. SPECIFICATIONS... 2 2. THREAD TRIMMER
More informationSoft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
More informationAir Cylinders Drive System Full Stroke Time & Stroke End Velocity. How to Read the Graph
1-1 Best Pneumatics Air Cylinders Drive System Full Time & End Velocity How to Read the Graph This graph shows the full stroke time and stroke end velocity when a cylinder drive system is composed of the
More informationPOWERSHIFT TRANSMISSION
1. Specifications... 5-3 2. Structure... 5-4 2.1 Torque converter... 5-4 2.2 Transmission... 5-5 2.3 Power Train Line... 5-6 2.4 Control Valve... 5-7 2.5 Main Regulator Valve... 5-7 2.6 Torque Converter
More informationFisher 657 Diaphragm Actuator Sizes and 87
Instruction Manual 657 Actuator (30-70 and 87) Fisher 657 Diaphragm Actuator Sizes 30 70 and 87 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Installation... 3 Mounting
More informationBERMAD BERMAD BERMAD WW M
Surge Anticipating Control Valve with Solenoid Control Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise
More informationProduct Manual (Revision G) Original Instructions. Auxiliary Devices for UG-40 Governors used in Marine Service.
Product Manual 03019 (Revision G) Original Instructions Auxiliary Devices for UG-40 Governors used in Marine Service Operation Manual General Precautions Read this entire manual and all other publications
More information(770) Turning Parts Changers Into TROUBLESHOOTERS!
Hydraulic Consulting, Inc. Turning Parts Changers Into TROUBLESHOOTERS! This e-book manual is your customized troubleshooting manual in Adobe Acrobat Portable Document File (PDF) format. It requires the
More informationPublication No. TR-500M-3/S1-1E. Rough Terrain Crane TR-500M-3. Model. Applicable Serial No
Publication No. TR-500M-3/S1-1E 01 Rough Terrain Crane Model TR-500M-3 Applicable Serial No. 581429 -- Foreword Foreword This material is the one that Publication No. TR-500M-3/R-01 was replaced from Japanese
More information