PLEASE SEE FOLLOWING PAGES FOR FURTHER DETAILS
|
|
- Ethelbert Stafford
- 6 years ago
- Views:
Transcription
1 Help? RKR HIH RSSUR FILTRS Types 4- and 4-2 Designed for systems operating up to 44 bar. Two filter sizes handle flows up to 560 l/min. Minimum static burst: 240 bar. /4 BSF threads. Filter down to microns absolute ( micron nominal). Visual indicators with fluorescent dial fitted on both sides - standard. Suitable for use with mineral oils - Contact arker Filtration for other fluids. Ready availability from arker Service Centre or regional distributors. BYSS VLV INLT OUTLT BYSS ORT XTRNL INDICTOR LINK MNTS LMNT BCK TO LS S FOLLOWIN S FOR FURTHR DTILS
2 Bypass valve flow curve Under normal operating conditions, the bypass valve is totally sealed and there is no leakage bypassing the element. When pressure drop across the filter exceeds the preset level, bypass flow commences and increases as pressure drop increases. Thus full flow is ensured and the proportion of filtered flow is maintained at a maximum. The curve above is typical. Typical Flow/ressure Curves for 4-2 Filter (Double Length) BCK TO
3 Filter element and media arker lement Filter Beta () Ratio Model No. Type Media Min m vge 40W Surface Wire mesh * * 25W Surface Wire mesh * * 20C Depth Cellulose.05. C Depth Cellulose B Depth Composite B Depth Composite *Not Beta () Rated. Beta () Ratio is a measurement of filtration efficiency. ll tests are conducted in accordance with ISO 4572 Multipass Test. ll media tested and suitable for high water base fluids. Typical Flow/ressure Curves for 4- Filter (Single Length) BCK TO
4 Specifications: Working ressure: maximum 44 bar. Static Safety Factor: to, minimum burst of 240 bar. Operating Temperatures: +2ºC to -40ºC. Filter Media: Wire mesh, cellulose or composite media; ratings 40 to micron. lement Collapse Rating: Standard 2 bar. High Collapse: 207 bar. Visual indicator on both sides is mechanically linked to by-pass valve. The indicator shaft is stainless steel fitted with viton seals as standard. By-pass opens when pressure differential exceeds 6 bar. Filter Head Material: S Iron. Filter Bowl Material: Steel xtrusion. Weights (approximately): 4-8. kg kg ll dimensions in mm Optional lectrical Indicator with Hirschmann Type Connector. (For lug in Code see chart below.) Voltage C DC Up to Resistive Load mp lectrical Ratings Tungsten Lamp Load NC - mp - NO Model 4 Inductive Load mp Visual indicator on each face Optional electrical indicator either side. Replaces one visual indicator. (For electrical rating see specification above.) lug in Code N. Open 2 N. Closed Common Cartridge removal clearance 0mm min. MOUNTIN HOLS 2 sets of 4 holes M x.5 x 2 deep Ø Denotes existing arker configuration 0Ø 62 Over casting OUTLT INLT Ø 9 BCK TO ort size /4 BSF Hirschmann type socket with cable gland
5 How to order filters MODLS 4-, 24-, 4- MODLS 4-2, 24-2, 4-2 Select the feature you want from each of the eight boxes below. See the example below. F 24 C M - 2: MODL : SLS 0 Buna (standard) F* Viton (optional) Indicator shaft seals are Viton as standard 6: OTIONL INDICTORS M Mechanical indicators Standard on LH side and RH side M* Mechanical indicator LHS electrical indicator RHS ML* Mechanical indicator RHS electrical indicator LHS Note: Left hand and right hand are when viewed on inlet port with bowl down. 7: MODIFICTIONS With bypass * With bypass and magnets No bypass 2* No bypass with magnets 8: DSIN NUMBR pplied to filter assembly by arker Filter Division. Use the full filter model code, including the design number when ordering replacement parts, elements and cartridges. 4: LMNT LNTH Single Length 2 Double Length *Option affects price of filter. 5: FILTR MDI 40W Reusable wire mesh. 40 micron absolute. 25W Reusable wire mesh. 25 micron absolute. 20C Disposable cellulose. 20 micron nominal. C Disposable cellulose. micron nominal. B Disposable composite. micron absolute. B Disposable composite. micron absolute. BH High collapse disposable composite. micron absolute. BH High collapse disposable composite. micron absolute. The micron ratings shown are in accordance with ISO STNDRD ORTS 4 - /2 BSF 24 - BSF 4 - /4 BSF Replacement lement art Numbers Media reference 40W 25W B 0B 20C C BH 0BH Single length lements Media reference 40W 25W B 0B 20C C BH 0BH Double length lements BCK TO
AGS/MPN Series. Medium Pressure Filters. Global Filtration Technology
Medium Pressure Filters Global Filtration Technology 63 Features/Applications for Medium Pressure Inline Filters AGS Series Rated Working Pressure 1000 PSI Rated Static Pressure 1500 PSI Flows to 25 GPM
More informationA complete line of pressure differential visual and electrical indicators are available with this series of filters.
D e s c r i p t i o n FHB series filters are designed for pressure line applications where manifold mounting is a specific requirement. The manifold type filters are designed to integrate onto manifold
More informationFMP IN-LINE FILTER SERIES. Maximum working pressure 250 bar. Flow rate to 500 l/min
INLIN FILTR Maximum working pressure 0 bar Flow rate to 00 l/min R.F. Filter Symbol without bypass Filter Symbol with Reverse Flow R.F. Filter Symbol with bypass Filter Symbol with bypass & Reverse Flow
More informationTank Top Mounted Suction & Return Line Filters
Suction Tank Top Mounted Suction & Return Line Filters Max 13 l/min - 1 bar Return Series Global Filtration Technology TYPICL PPLICTIONS OPRTIONL DIGRM Mobile equipment with both open and closed hydraulic
More informationHigh Pressure Filters. 15P/30P Series. MAX 200 I/min bar. High pressure filters
P/3P Series MAX 2 I/min - 27 bar 9 High pressure filters P/3P Series Features & Benefits Features Compact aluminium housing Two head sizes and two bowl lengths Large ports and wide flow paths Microglass
More information22PD/32PD Series High Pressure Duplex Filters Max 260 l/min bar
/ Series Max 26 l/min - 21 bar A duplex design with a wide application capability Designed to offer continuous operation during element change The / Series utilizes a duplex design with integrated balancing
More informationD e s c r i p t i o n
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More informationPressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing
More informationHIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 45 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold
More informationBy-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
More informationDuplex Pressure Filters
Duplex Pressure Filters Series DFDK Ball Valve Selector Pressures to 45 psi Flows to 9 gpm APPLICATIONS HYDAC DFDK Duplex Filters are ideal for use on hydraulic test equipment, robots, or other critical
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More informationPressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
More informationOil Solutions. GA/BGAH Series Medium Pressure Filters. Global Filtration Technology. Filtration.
Oil Solutions Medium Pressure Filters Filtration Global Filtration Technology www.oilsolutions.com.au Features/Applications for Medium Pressure Inline Filters GA Series Pressures to 750 PSI Flows to 100
More information12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-in filtration.
12CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The 12CS Series features a
More informationHIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 4 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold block
More informationD e s c r i p t i o n
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed (MPH) or totally immersed into
More informationMedium Pressure Filters. 45M/45M Eco Series. MAX 260 I/min - 40 bar FEATURING. Medium pressure filters
/ Eco eries MAX 26 I/min - 4 bar FEATURING 8 Medium pressure filters / Eco eries Features & Benefits Features Cast iron head, steel bowl Reinforced Microglass III replacement elements Visual, electrical
More informationLow Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
More informationPressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
More information(Ecological Pressure Filter)
EPF iprotect (Ecological Pressure Filter) High Pressure Filters Max 7 I/min - 45 bar A compact, cost effective pressure filter solution Designed with the iprotect patented filtration technology The Parker
More informationHPK04 Max Flow: 120 gpm (454 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 6000 psi 41,380 kpa 413.8 bar Rated Static Burst to: Flow Range To: 17000 psi 117,300 kpa 1173 bar 120 gpm 454 lpm Features The high
More informationPressure: Max working 420 bar (6000 psi) (acc. to NFPA T ) Burst 1260 bar (18300 psi) (acc. to NFPA T )
HYDRULIC FILTRTION In line high pressure filters Technical Information Pressure: Max working 420 bar (6000 psi) (acc. to NFP T 3.10.5.1) Burst 1260 bar (18300 psi) (acc. to NFP T 3.10.5.1) Housing Connection
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
More informationSPIN-ON FILTER - LOW PRESSURE LINE
SERIES MSH SPIN-ON FILTER - LOW PRESSURE LINE Maximum working pressure 5 psi Flow rate to 8 GPM D e s c r i p t i o n MSH working pressure of 5 psi, with a peak pressure This filter MSH series utilises
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
More informationPressure: Max working 160 bar (2300 psi) (acc. to NFPA T ) Burst 480 bar (6900 psi) (acc. to NFPA T )
HYDRULIC FILTRTION F16-XD series In line medium pressure filters Technical Information Pressure: Max working 16 bar (3 psi) (acc. to NFP T 3.1..1) Burst 48 bar (69 psi) (acc. to NFP T 3.1..1) Housing Connection
More informationHMK05/25 DURAMAX Spin-Ons
100 gpm, 378 lpm /5 DURAMAX Spin-Ons Working Pressures to: Rated Static Burst to: 350 psi 413 kpa 4.1 bar 800 psi 550 kpa 55. bar Flow Range to: 50 gpm 100 gpm 189 lpm 378 lpm Features (single) and (double)
More informationFPK04 Max Flow: 100 gpm (379 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 4350 psi 30,015 kpa 300 bar Rated Static Burst to: Flow Range To: 9135 psi 63,000 kpa 630 bar 100 gpm 379 lpm Features The T-type ported
More informationHIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Side Mounting Series DF...QE Pressures to 4 psi Flows to 18 gpm HYDAC DF...QE High Pressure Filters are designed to be side mounted directly onto the
More informationConnection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
More informationA complete line of pressure differential visual and electrical indicators are available with this series of filters.
D e s c r i p t i o n FHP series filters are designed for high pressure line applications and are suitable for in-line installation. Continued research and development on both the filter bodies and the
More information[You may download this article at: https://fluidsys.org/downloads/ ]
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
More informationMPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN. Maximum working pressure 12 bar. Flow rates to 300 l/min
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN Maximum working pressure 12 bar Flow rates to 3 l/min D e s c r i p t i o n MPS/MST The spin-on filter series is a complete product range suitable, for
More informationHIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationFMM bar. Working pressure. Style T. Style D. Style S. Style B D.I. D.I. D.I. D.I.
30 FMM 050 SRIS FMM 050 Working pressure 0 bar Style S Style Style T Style D 3 3 Technical data Filter body (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel (chemical heat treatment)
More informationp (PSID) p (bar) p (PSID) p (bar) p (PSID) p (bar) Seals Element length Media rating (µ)
Pressure Drop Curves The recommended level of the initial pressure drop is ma.8 bar. If the medium used has a viscosity different from 3 cst, pressure drop over the filter can be estimated as follows:
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationModuflow Series IL2/RF2/CF2 Low Pressure Filters
IL/RF/CF Low Pressure Filters 35 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile filter available
More informationAN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF. Product Features:
Max. I/min - bar When an all-in-one solution matters Reduction of reservoir accessories The Tanktopper Series features an integrated, micron Abs. air breather. Maximum pressure bar. Maximum flow l/min.
More information12CS/50CS Series. Coreless Spin-on Filters
12CS/5CS Series Coreless Spin-on Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationHIGH PRESSURE FILTERS Series HF2P
HIGH PRESSURE FILTERS Series HF2P Pressures to 3000 psi Flows to 25 GPM Port Size 3/4 APPLICATION HYDAC HF2 Inline High- Pressure Filters are designed for use on hydraulic power units, machine tools, plastics,
More information15/40/80CN Series Medium Pressure Filters Max. 600 I/min - 70 bar
1/4/8CN Series Max. 6 I/min - 7 bar Premium performance for medium pressure applications FEATURING An economical multipurpose filter solution The CN Series utilizes a cast aluminium head and spin-on bowl
More informationTTF Series MAX 500 I/min - 10 bar
MX 5 I/min - bar N INNOVTIVE GREEN FILTER FETURING LEIF LEIF Low pressure filters Features & enefits Features bar rated filter Cast aluminium head LEIF elements Magnetic pre-filtration In-to-Out filtration
More informationPressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION Tank top return filters Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.1..1) Burst 16 bar (232 psi) (acc. to NFPA T 3.1..1) Housing Connection Ports:
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to 2 psi (1379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters MEDIUM PRESSURE
More informationFHF325 series. Filter housing according to SAE J2066 for HF4 filter elements. High Pressure fi lters
High Pressure fi lters FHF5 series Maximum pressure up to 50 bar Flow rate up to 500 l/min housing according to SAE J066 for HF filter s 95 High Pressure fi lters FILTER SIZING The correct filter sizing
More informationOUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More informationPressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
More informationPressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRULIC FILTRTION In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x: 3 bar (4 psi)
More informationATZ 300 (2 1 /2 SAE FLANGE) Empty Housing Flow (US GPM) p (PSID) p (bar)
Pressure Drop Curves The recommended level of the initial pressure drop for suction filters is.3 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated
More informationRF4 Series. Return Line Filters
RF Series Return Line Filters 7 RF Series Applications for RF Filters Mobile Equipment Mining Equipment Industrial Power Units Automotive Specified Equipment The RF is a rugged, industry proven filter
More informationFHA 051 Working pressure 6000 psi
6 SRIS Working pressure 6000 psi Style S Style Style T Style D Style V Style Z D.I. 7 8 Technical data Filter body (Materials) Head: Steel (chemical heat treatment) Housing: Steel (chemical heat treatment)
More informationSeries RFL In-Line Filter
APPLICATION Series RFL In-Line Filter Pressures 2 bar Flows to 400 l/min HYDAC RFL In-Line Filters are designed for in-line mounting. These filters can be used in hydraulic, flushing, and for extraction
More informationMPD Series. Medium Pressure Duplex
Medium Pressure Duplex 81 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
More informationMPF filters within this range are suitable for flow rates up to 750 l/min.
D e s c r i p t i o n MPF series filters are designed for return lines, and are installed semi-immersed in a reservoir. Continued Research & Development on both the filter bodies and the filter elements
More informationMPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
More information12CS Series Coreless Spin-on Filter Max. 75 l/min - 35 bar
Coreless Spin-on Filter Max. 75 l/min - 35 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The features a Parker, re-usable coreless
More information7000 Series High Pressure Filters
7 Series High Pressure Filters Max 45 l/min - 42 bar FEATURING Global Filtration Technology 7 Series TYPICAL APPLICATIONS Forestry Equipment Industrial Power Units Pulp and Paper Port Handling Equipment
More informationSPIN-ON FILTERS & ELEMENTS
ABSOLUTE RATED (BETA SPIN ) & NOMINAL RATED SPIN-ON FILTERS & ELEMENTS Single and Twin Element Models Pressures to 20 psi Flows to 120 gpm APPLICATION HYDAC Spin-On Filters are for filtration of hydraulic
More informationPortable Filter Carts Models 5MF and 10MF
s Models 5MF and 10MF 161 Applications for Parker Filter Carts Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid that
More informationLow Pressure Filter Pi 2300
Low Pressure Filter Pi 2300 Nominal pressure 25/40 bar (360/570 psi), nominal size up to 1 Filter elements according DIN 24550 1. Features High performance filters for modern hydraulic systems Provided
More informationSuction Return Series
Tanktop Mounted Suction & Return Line Filters - Types SR1 & MAX 25 I/min - 1 bar AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF 53 Tanktop Mounted Suction & Return Line Filters - Types SR1 & Features &
More informationBGT Series. Low Pressure Filters
Low Pressure Filters 60 Applications - Flows to 640 GPM - 3 Micron Absolute to 120 Micron Absolute - Disposable or Recleanable Elements - Visual and Electrical Indicators - Microglass elements - Magnetic
More information12CS/50CS Series Coreless Medium Pressure Filters
12CS/5CS Series Coreless Medium Pressure Filters 65 12CS/5CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationSRK-COMBO. Return & Suction Filters Low Pressure Filter In-Tank up to 10 bar. Filter Elements Emergency Suction
Return & Suction Filters Low Pressure Filter In-Tank up to 10 bar Technical Data Filter Elements Main Operating pressure up to 1000 kpa (10 bar). Static pressure testing up to 1500 kpa (15 bar). Back pressure
More informationStainless Steel Pressure Filters
Stainless Steel Pressure Filters Inline Filters up to 26,000 PSIG up to 35 GPM Description Process Filtration MPSSF / HPSSF/ ACSSF Series The pressure filters consist of two main sections: the filter head
More informationSpin-on elements. Type 80, 81 and 82. Contents. Features. RE Edition:
Spin-on elements Type 80, 81 and 82 RE 51478 Edition: 2015-06 Sizes according to according to Bosch Rexroth standard: 30 to 130 Pressure differential resistance up to 5 bar [72.5 psi] Filter rating: 1
More information50P Series High Pressure Filters
P Series High Pressure Filters 1 P Series Applications for P series filters Automotive specified equipment Hydrostatic transmission circuits Servo and proportional controls Offshore drilling rigs Mining
More informationPRESSURE FILTERS FOR MODULAR STACKING. Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICATION PRODUCT FEATURES FILTER ELEMENTS
PRESSURE FILERS FOR MODULAR SACKING Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICAION DF...Z Pressure filters are designed for modular stacking and can be mounted directly to the component to
More informationSERIES SF2-250 SUCTION FILTER. Flow rate to 45 gpm
SERIES SF2-250 SUCTION FILTER Flow rate to 45 gpm D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows
More informationPictorial Index Hydraulic Filters
Hydraulic Filters Reservoir Accessories Pictorial Index Hydraulic Filters RIF-10 INLINE SPIN-ON FILTERS 1.1/4 S PAGES 356-357 PAGES 360-361 RTI AND RFI TANK TOP FILTERS PAGES 366-367 S: 1.1/4 BSPP MAX.
More informationAN INNOVATIVE GREEN FILTER FEATURING
When an all-in-one solution matters Reduction of reservoir accessories LEIF AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF Contact Information: Hydraulic European Product Information Centre Freephone:
More information10 Hydraulic Filters
1 Hydraulic Filters Introduction.... 1- HF65 Series.... 1-9 HF66 Series.... 1-15 HF67 Series.... 1-21 HF68 Series.... 1-1 Dual Spin-On Assembly.... 1-5 Introduction Hydraulic Filtration Systems Cummins
More informationNFH Low Pressure Filters
PPLICTIONS NFH Low Pressure Filters Pressures to 360 psi Flows to 450 gpm Water Removal Capability 4 Ports HYDC NFH In-line Return Filters are designed for use on hydraulic power units, machine tools,
More informationETF Series. Tanktop Mounted Return Line Filters max. 175 I/min - 6 bar. An economic return line filter. Product Features: Contact Information:
max. 75 I/min - 6 bar An economic return line filter Improved system protection The ETF Series utilizes a re-inforced co-polymer head equipped with 2 return ports and quick-release cover. Maximum pressure
More informationFPK 02 AP280. Pressure Line High Pressure Filters In-Line up to 420 bar. Mix&Match to Get What You Need
FPK 02 AP280 Pressure Line High Pressure Filters In-Line up to 420 bar Mix&Match to Get What You Need Donaldson's Mix&Match system provides the great performance and functional advantages of custom-engineered
More informationSeries RFLD Duplex In-Line Filter
APPLICATION Series RFLD Duplex In-Line Filter Welded Pressures to 230 psi Flows to 3900 gpm HYDAC RFLD in-line filters are designed for in-line mounting and are mainly used in continuously operating systems.
More information10 Hydraulic Filters
1 Hydraulic Filters Introduction................................... 1-3 HF65 Series................................. 1-9 HF66 Series................................ 1-15 HF67 Series................................
More informationHigh Pressure fi lters. FHP series. Maximum pressure up to 420 bar - Flow rate up to 750 l/min. High Pressure fi lters
igh Pressure fi lters FP series Maximum pressure up to bar Flow rate up to 7 l/min igh Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending
More informationInline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
More informationKLT and KLS Series Tank Top Return Line Filters
KLT and KLS Series Tank Top Return Line Filters 23 KLT/KLS Series Tank Top Return Line Filters Applications for KLT and KLS Filters Mobile Equipment Construction, Refuse Industrial Power Units Machine
More informationLS 025 LS 035 In-line mounting Connection up to G¾ / -12 SAE Nominal flow rate up to 33 l/min / 8.7 gpm
Suction Filters LS 025 LS 035 In-line mounting Connection up to G¾ / -2 SAE Nominal flow rate up to 33 l/min / 8.7 gpm Description Application To be installed in the suction line of the pumps of hydraulic
More informationIn-Line Filters. Section Index. High FPK
Hydraulic In-Line Filters Section Index NEW Medium Pressure Filters FMK-FM............................ FCK-LC............................. 123 HMK04 Duramax.................... 124 HMK05 Duramax....................
More informationMPD Series Medium Pressure Filters
Medium Pressure Filters 113 Applications - Circulating Lube Oil Systems - Power Generation Control Systems - Steel Mill Control Systems - Pulp & Paper Control Systems - Test Stands - Automotive Stamping
More informationFPK02 In-Line Cartridge Filters
HIGH PRESSURE FILTERS FPK2 Max Flow: gpm (9 lpm) FPK2 In-Line Cartridge Filters Working Pressures to: Rated Static Burst to: Flow Range to: 69 psi 42, kpa 42 bar 913 psi 63, kpa 63 bar gpm 9 lpm Features
More informationFiltrec elements are tested also according to ISO 2942, ISO and ISO 3968
HYDULIC FILTTION F-1 series Spin-on filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFP T 3.10.17) Burst 20 bar (290 psi) (acc. to NFP T 3.10.17) Connection Ports: 3/4 1 1/2
More informationLow & High Pressure ProGuard Filters
56 ±.2 (2.2 ±.5) ø13 +1.5 (5.12 +.6 ) INDICATOR PLUG 193 (7.6) 14 (5.51) 95 (3.74) LABEL 1 5/8-12UNF IN. OR G 1 1/4 PORT SAE-2 PORT 2 PL'S 196 (7.72) 58 (2.28) ø13.2 (5.13) L (4 Low & High Pressure ProGuard
More informationLow pressure filter Spin-on cartridges PX
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Low pressure filter Spin-on cartridges PX Nominal pressure 16/10 bar (230/140 psi), nominal size
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst
More informationDIN Filter element according to DIN Low & Medium Pressure filters. Maximum pressure up to 60 bar - Flow rate up to 330 l/min
Low & Medium Pressure filters & series Maximum pressure up to 60 bar Flow rate up to 0 l/min DIN 550 09 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
More informationTTF/BGTS Series. Return In-Tank Filters. Global Filtration Technology
Return In-Tank Filters Global Filtration Technology 25 Features/Applications for Tank Top Return Flow Filters Flows to 640 GPM 3 Micron Absolute to 120 Micron Absolute Disposable or Recleanable Elements
More information12CS Series Coreless Spin-on Filter Max. 75 l/min - 35 bar
2CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-on filtration Lightweight, non-metallic element that can be incinerated The 2CS Series features a Parker,
More informationHIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm
HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm Hydraulic Symbol A B Features Meets HF4 automotive standard Non-welded housing design reduces stress concentrations and prevents
More informationHIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS
HIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS Microfil III media are made from micro-fine glass fibers which are randomly laid into a multilayered web. The media are impregnated
More information12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-on filtration.
Coreless Spin-on Filter Max. 75 l/min - 35 bar Environmentally friendly alternative for spin-on filtration Lightweight, non-metallic element that can be incinerated The features a Parker, replaceable coreless
More informationMEDIUM PRESSURE FILTERS
Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal
More informationNFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports PPLICTIONS HYDC NFHD Return Line Filters are designed for use on hydraulic power units, machine tools, plastics injection
More informationMATERIALS CARTRIDGES PRESSURES VALUES TESTS CARRIED OUT ON FILTER ELEMENTS
1 OIL FILTER DESCRIPTION Many years of in-field experience have shown the necessity of more and more efficient controls on the contamination level of hydraulic fluids and fuels. With this goal uppermost
More information