YZ-PSSB10 Yamaha YXZ 1000 R Behind Seat 10 Subwoofer Enclosure

Size: px
Start display at page:

Download "YZ-PSSB10 Yamaha YXZ 1000 R Behind Seat 10 Subwoofer Enclosure"

Transcription

1 SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA Phone: Fax: Yamaha YXZ 1000 R Behind Seat 10 Subwoofer Enclosure WARRANTY INFORMATION: All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in material or workmanship. All SSV Works Speakers are covered by a limited 1 year warranty against defects in material or workmanship. Labor for replacement of defective components is not covered. Contact SSV Works for further warranty information.! Please read and understand these instructions completely before installation to avoid possible injury, or damage to the accessory or vehicle. TOOLS NEEDED FOR INSTALLATION PARTS LIST - 10mm and 12mm Socket and Ratchet - 4mm Allen Key - Panel Removal Tool - 1/4 drill bit - #3 Phillips Screw Driver - Air Saw or High Speed Cutting Tool Enclosure x1 M6x0 Screws x 16 M6 Washer x17 4. M6 Lock Nut x 1 5. Top Mounting Bracket 6. Side Mounting Bracket 7. T-Bracket 8. Cut Template PARTS LIST IMAGES Enclosure x 1 M6 x 0 Screws x 16 M6 Washers x M6 Nuts x 1 5. Top Mounting Bracket 6. Side Mounting Bracket 7. T-Bracket 8. Template x 1 INSTALLATION NOTES The use of a thread locker is recommended on all screws to prevent loosening due to vibration.

2 Removing the Passenger Seat Lift the front of the seat pan to release it from the retaining clip securing it down. Using a 12mm socket or wrench remove the (4) bolts securing the base of passenger seat. Lift the passenger seat up and away. A The center console is split into two pieces, a battery cover and dash cover. The battery cover is secured by 2 panel snaps at the rear of the panel. To remove the battery cover simply lift in an upward direction to release it from the 2 panel snaps securing it down. B To remove the dash cover you will need to extract the panel snap that is exposed after removing the battery cover. C Next remove the hood and extract (2) 10mm bolts securing the top of the dash cover. D Remove the dash by lifting up and away. E

3 F Remove the Center Console Passenger Side Panel The passenger side panel is secured by 5 panel snaps & 3 bolts Remove all panel snaps using a panel removal tool Extract the 3 bolts along the lower perimeter of the panel & remove G Removed Center Console Passenger Side Panel I H Remove Passenger Quarter Panel Fairing / Body Panel Removing the Lower Side Panel The quarter panel is secured by 4 (4mm) hex screws, 2 (10mm) bolts, and 2 panel snaps. The side panel is secured by 1 bolt, 2 panel snaps & gas cap. Remove the 4 hex screws and 2 bolts first. Remove both panel snaps near the front of the panel. Remove the 2 panel snaps located at the top of the panel. Next remove the one bolt near the seat belt bolt. 4. Once all are removed safely pull the panel away from the vehicle. 4. Remove the gas cap 5. Lift away and remove J Removing Under Seat Tank Cover Shroud is secured by 4 panel snaps & 1 (17mm) seat belt bolt Remove the 4 panel snaps using a panel removal tool Using a 17mm socket remove the seat belt bolt. 4. Pull the seatbelt out of the plastic shroud & remove the tank cover K Rear panel is secured by 5 (10mm) bolts and 3 panel snaps extract and remove.

4 Illustration A Illustration B Cut Panel L Cutting the Rear Panel to size for the Subwoofer Cut the included template to size. Line up the holes along the top of the template to the holes located at the top of the panel. (Illustration A) Use the illustration above to understand how to line up the template. 4. The template will provide you with the guides to mark along the top of the panel. 5. Once marked you will need to follow the segmented lines on Illustration B to mark the rest of the panel. 6. This part is easy because you will follow factory panel lines to remove. M When the Subwoofer Enclosure is mounted in position it will be really difficult to remove the oil sump cover. We recommend cutting it in half to easily remove it for future serviceability. Before you put the sub enclosure into position remove the oil sump cover by extracting (3) 10mm bolts along the parameter. Cut the cover in half leaving the front half with the 2 factory bolt hole provisions and the back half with the one bolt hole position. Be sure to split it before the cover wraps around the back of the oil sump. 4. This will allow you to remove the front half of the cover and gain access to the oil drain when needed in the future.

5 N O Install the subwoofer enclosure into position by approaching 4. it from the inner wheel well. 5. First you will want to place the top bracket around the chassis tube to use as a guide for positioning the sub enclosure. Lift up and angle the top of the enclosure towards the bracket. Gently place the enclosure on the floor in front of the rear tire with the sub facing towards the cab of the vehicle. Next loosely install the side cage bracket using (4) Philips bolts and (4) Washers. 6. Once in position fasten the top bracket loosely around the chassis to the enclosure with (4) Philips screws and (4) Washers. P Install the T bracket using (2) Philips Screws and (2) washers. Q Use a (1) Philips Screw (2) Washer and (1) Nut to through bolt the T bracket to the vehicle chassis. Use (3) M6 Philips screws and (3) M6 washers to fasten the bottom of the sub enclosure to the panel below. R Next, go back and tighten all the screws securing the brackets to the sub enclosure.

6 T Install the new seat belt shroud by using a factory 10mm bolt to secure in position. Install the cut rear panel back into position. Use (2) Philips screws to secure the rear panel to the threaded inserts on the sub enclosure to help minimize vibration. Run all necessary cabling and re-assemble factory panels WIRING INSTRUCTIONS Amplifier For proper sound, ensure the speaker polarity is correct connect the + to the + and the - to the - from the speaker wire to the amplifier. If using with an SSV Works complete system refer to the amplifier wiring instructions for more detailed wiring information SSV Works, Oxnard, CA Rev. B

SS-BS10 Polaris Slingshot 10 Behind Seat Enclosure

SS-BS10 Polaris Slingshot 10 Behind Seat Enclosure SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030 www.ssvworks.com Phone: 818-991-1778 Fax: 866-293-6751 Polaris Slingshot 10 Behind Seat Enclosure WARRANTY INFORMATION: All SSV Works enclosures are

More information

GN-3A Polaris General SSV Works 3 Speaker Audio Kit

GN-3A Polaris General SSV Works 3 Speaker Audio Kit GN-3A Polaris General SSV Works 3 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 17 Kick Panel Speakers Installation pg 21 MRB3 and Dash

More information

PHASE 3 POWERSPORTS AUDIO KIT MAVERICK X3 CAN-AM. pg 3 Disassembly, Wire and Amplifier Plate Installation. pg 11 Dash Kit Installation

PHASE 3 POWERSPORTS AUDIO KIT MAVERICK X3 CAN-AM. pg 3 Disassembly, Wire and Amplifier Plate Installation. pg 11 Dash Kit Installation CAN-AM MAVERICK X3 PHASE 3 POWERSPORTS AUDIO KIT pg 3 Disassembly, Wire and Amplifier Plate Installation pg 11 Dash Kit Installation pg 15 Underseat Subwoofer Installation pg 19 Dash Speaker Pods Installation

More information

pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation

pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation RZ3-5KRC RZR XP1000 & 2015+ RZR900 with Ride Command SSV Works 5 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers

More information

RZ3-5A Polaris RZR XP 1000 & 900 SSV Works 5 Speaker Audio Kit

RZ3-5A Polaris RZR XP 1000 & 900 SSV Works 5 Speaker Audio Kit RZ3-5A Polaris RZR XP 1000 & 900 SSV Works 5 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25

More information

RZ3-3A Polaris RZR XP 1000 & 900 SSV Works 3 Speaker Audio Kit

RZ3-3A Polaris RZR XP 1000 & 900 SSV Works 3 Speaker Audio Kit RZ3-3A Polaris RZR XP 1000 & 900 SSV Works 3 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25

More information

RZ3-5K Polaris RZR XP 1000 & 900 Kicker 5 Speaker Audio Kit

RZ3-5K Polaris RZR XP 1000 & 900 Kicker 5 Speaker Audio Kit PO H PWER PO 5 O KIT I E D U A S A TS S I R LA R Z R R O SP pg 2 pg 9 pg 13 pg 25 pg 29 Disassembly, Wire and Amplifier Plate Installation Glovebox Subwoofer Installation Kick Panel Speakers Installation

More information

PHASE 3 POWERSPORTS AUDIO KIT RZR POLARIS. pg 2 Disassembly, Wire and Amplifier Plate Installation. pg 9 Glovebox Subwoofer Installation

PHASE 3 POWERSPORTS AUDIO KIT RZR POLARIS. pg 2 Disassembly, Wire and Amplifier Plate Installation. pg 9 Glovebox Subwoofer Installation POLARIS RZR PHASE 3 POWERSPORTS AUDIO KIT pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25 MRB3 and Dash Kit Installation

More information

99-03 V6 "Shaker" System Instructions. *03 Model requires new hood Contents w/ Kit. Tool List For Appliqué:

99-03 V6 Shaker System Instructions. *03 Model requires new hood Contents w/ Kit. Tool List For Appliqué: 99-03 V6 "Shaker" System Instructions *03 Model requires new hood Contents w/ Kit 1 - Hood Appliqué 1 - Aluminum Shaker Scoop 1 - Lower Air Box w/drain tube fittings (2) 1 - Upper Air Box w/cdc nameplate

More information

(2) #10 Washers (6) 5/16 Narrow Washers (2) Locknuts (2) 5/16 Locknuts

(2) #10 Washers (6) 5/16 Narrow Washers (2) Locknuts (2) 5/16 Locknuts INSTALLATION INSTRUCTIONS TJ Speaker / Storage Security Console #066 Please read and fill out the enclosed warranty registration card to activate your warranty. SHIPMENT CONTENTS Console Front Shift Lever

More information

RZR WINCH KIT KIT P/N

RZR WINCH KIT KIT P/N RZR WINCH KIT KIT P/N 2878787; 2879334 Application All RZR Models except RZR XP Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

(2) #10 Washers (1) ¼ Washers (6) 5/16 Washers (2) Locknuts (2) 5/16 Locknuts

(2) #10 Washers (1) ¼ Washers (6) 5/16 Washers (2) Locknuts (2) 5/16 Locknuts INSTALLATION INSTRUCTIONS TJ Speaker / Storage Security Console #066 Please read and fill out the enclosed warranty registration card to activate your warranty. SHIPMENT CONTENTS Console Front Shift Lever

More information

SWING DOOR SOFT ENCLOSURE (part# 16733)

SWING DOOR SOFT ENCLOSURE (part# 16733) 800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench

More information

Main Lift Cylinders. Level of difficulty: Not very hard, only a number of steps involved requires some patience, but is very rewarding!

Main Lift Cylinders. Level of difficulty: Not very hard, only a number of steps involved requires some patience, but is very rewarding! Main Lift Cylinders Level of difficulty: Not very hard, only a number of steps involved requires some patience, but is very rewarding! Tools needed: - Stubby Phillips screwdriver, or ratchet with Phillips

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 2011 Dodge Charger Road Defender 5000 Series Push Bumper Part Number 5076 Do not attempt to install this product on any vehicle other than the one it is designed for and listed

More information

Mustang Classic LightBar Instructions

Mustang Classic LightBar Instructions 1994-2004 Mustang Classic LightBar Instructions Note: Read installation instructions before starting. Component List: 1 LightBar 4 Poly Plugs 4 LightBar Bolts 4 LightBar Washers 2 LightBar Rivets 2 Light

More information

CONTENTS: TOOLS REQUIRED:

CONTENTS: TOOLS REQUIRED: CONTENTS: 1EA. FIVE CHANNEL AMPLIFIER/BRACKET ASSEMBLY P/N RBI77KICK37 1EA. POWER HARNESS P/N RH41PMP 1EA. OVERLAY HARNESS P/N RH41PM 3EA. NUT P/N RFM6NUT 6EA. WIRE TIE P/N RFZIP6 1EA. FUSE 30 AMP P/N

More information

Mustang V6 Shaker 99-04* Components Check List:

Mustang V6 Shaker 99-04* Components Check List: Mustang V6 Shaker 99-04* Components Check List: *03 Model requires new hood CDC Inspected Installer Check Quantity Descriptions 1- Hood Appliqué 1- Aluminum Shaker Scoop 1- Lower Air Box w/drain tube fittings

More information

Mustang CLASSIC LIGHT BAR INSTALLATION INSTRUCTIONS CDC #

Mustang CLASSIC LIGHT BAR INSTALLATION INSTRUCTIONS CDC # 1990-1993 Mustang CLASSIC LIGHT BAR INSTALLATION INSTRUCTIONS CDC # 101000 Kit Components: 1 Light Bar 4 Bolts ( 5 / 16-18 x 2.5 ) #182010 4 Washer #182005 4 Shims #182009 2 Dark Blue Connectors #182004

More information

Installation Instructions

Installation Instructions Installation Instructions Automatic Retracting Running Board Vehicle Application Ford F150 Supercrew 2001-2003 (2004 Heritage) Part Number: 75111-01 www.bestop.com - We re here to help! Visit our web site

More information

CONTENTS TOOLS REQUIRED:

CONTENTS TOOLS REQUIRED: CONTENTS 1EA. SUBWOOFER ASSEMBLY P/N 77KICK13SUBASSEMBLY 1EA. SUB BRACKET P/N 05030060AA 1EA. 200 WATT AMP P/N REBTL200 1EA. AMP BRACKET P/N RMDR 1EA. POWER HARNESS P/N RHRAMP 1EA. OVERLAY HARNESS P/N

More information

INSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter

INSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter INSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter TOOLS REQUIRED: Phillips Screw Driver T-20 Torx bit Standard Socket set 9/64 Allen wrench

More information

2017 Current Ford SuperDuty Adaptive Cruise Control Relocation Bracket Installation Instructions

2017 Current Ford SuperDuty Adaptive Cruise Control Relocation Bracket Installation Instructions 2017 Current Ford SuperDuty Adaptive Cruise Control Relocation Bracket Installation Instructions PREPARATION 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set

More information

ROUSH Active IO Exhaust. Installation Instructions P/N: (R LITE) Fastback GT Convertible GT V8

ROUSH Active IO Exhaust. Installation Instructions P/N: (R LITE) Fastback GT Convertible GT V8 Installation Instructions P/N: 422128 (R1318-5231LITE) Fastback GT Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active IO Exhaust Installation Instructions P/N: 422128

More information

CVO - with ipod Amp & Speaker Upgrade Install Instructions for Batwing Fairing

CVO - with ipod Amp & Speaker Upgrade Install Instructions for Batwing Fairing CVO - with ipod Amp & Speaker Upgrade Install Instructions for Batwing Fairing Tools Needed: 1/2 inch Socket Wire Cutters 7/16 inch Socket Wire Strippers 5/16 inch Socket Phillips Screwdriver 1/2 inch

More information

INSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274

INSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274 INSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274 PARTS CHECKLIST Tuffy Console #9 Left Front Mounting Bracket #10 Right Front Mounting Bracket #11 Electronics mounting bracket #12 Divider

More information

STEREO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev 01 03/16 Page 1 of 11. E2, E4, E6, and el XD

STEREO KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev 01 03/16 Page 1 of 11. E2, E4, E6, and el XD STEREO KIT P/N 2881864 APPLICATION E2, E4, E6, and el XD BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions

More information

Triumph Trophy SE Dash Mounted Accessory Shelf. Owner s / Installation Manual

Triumph Trophy SE Dash Mounted Accessory Shelf. Owner s / Installation Manual Triumph Trophy SE Dash Mounted Accessory Shelf Triumph Trophy SE Dash Mounted Accessory Shelf Congratulations on your purchase of the Triumph Trophy SE Dash Mounted Accessory Shelf. When properly mounted,

More information

INTERIOR LED LIGHTING KIT

INTERIOR LED LIGHTING KIT INTERIOR LED LIGHTING KIT P/N 2880549 APPLICATION SLINGSHOT BEFORE YOU BEGIN Read these instructions thoroughly and make sure all parts and tools are accounted for. Please retain these installation instructions

More information

Part number PF8050. Tools required: 1-8mm nut driver 1-8mm socket 1-10mm socket 1-13mm socket 1- ratchet 1- ratchet extension 1- set of allen wrenches

Part number PF8050. Tools required: 1-8mm nut driver 1-8mm socket 1-10mm socket 1-13mm socket 1- ratchet 1- ratchet extension 1- set of allen wrenches Part number PF8050 2003-08 Dodge Ram 5.7L V8 Hemi 1- MR Tech Power-flow Intake system 1- Power Box-contents: PB400D-8 1-8 Inverted top filter (A) (#1022) 1- Main body, top and screen (B) (#15015) 1-4 velocity

More information

Jeep Wrangler PSS-20WRA Sound System Installation Manual Model: Wrangler Unlimited Model Year:

Jeep Wrangler PSS-20WRA Sound System Installation Manual Model: Wrangler Unlimited Model Year: UNLIMITED 1/20 Jeep Wrangler PSS-20WRA Sound System Installation Manual Model: Wrangler Unlimited Model Year: 2007 2014 *Not compatible with factory amplified systems Jeep Model Year Wrangler Unlimited

More information

Fig A ADDICTIVE DESERT DESIGNS. Preparation: Removal:

Fig A ADDICTIVE DESERT DESIGNS. Preparation: Removal: Preparation: Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake. We recommend reading through the installation instructions in whole before performing

More information

4. Remove the bed bolts A.) Using a 1/2 socket, remove the four inner bed bolts. B.) Using a T-25 Torx driver, remove the four outer bed bolts.

4. Remove the bed bolts A.) Using a 1/2 socket, remove the four inner bed bolts. B.) Using a T-25 Torx driver, remove the four outer bed bolts. Installation Instructions Part Number 883-282 Intake kit with scoop 2008-14 Polaris Ranger RZR 800 Tools Required For Installation: 7/16 and 1/2 Wrenches. 10mm, 7/16, and 1/2 Sockets. T-25 Torx driver.

More information

Important! The subwoofer system is designed to be used only with the rear seat in the up position only.

Important! The subwoofer system is designed to be used only with the rear seat in the up position only. Important! The subwoofer system is designed to be used only with the rear seat in the up position only. CONTENTS 1EA. SUBWOOFER ASSEMBLY 2EA. BRACKET LOWER 2EA. BRACKET UPPER 1EA. OVERLAY HARNESS 2EA.

More information

Installation Instructions For Part Number: Scoop and Snorkel Kit

Installation Instructions For Part Number: Scoop and Snorkel Kit Installation Instructions For Part Number: 883-275 Scoop and Snorkel Kit 2008-14 Polaris Ranger RZR 800 800 E.F.I. Tools Required For Installation: 7/16 and 1/2 Wrenches. 10mm, 7/16, and 1/2 Sockets. T-25

More information

CONTENTS: 1EA. SUBWOOFER HARNESS 2PIECE TOOLS REQUIRED:

CONTENTS: 1EA. SUBWOOFER HARNESS 2PIECE TOOLS REQUIRED: CONTENTS: 1EA. SUBWOOFER ENCLOSURE 1EA. SUBWOOFER HARNESS 2PIECE 2EA. T-TAP 1EA. FUSE 30 AMP 6EA. WIRE TIES 1EA. INSTRUCTIONS P/N 77KICK14SUBASSEMBLY P/N RHPM1 P/N RFTTAPB P/N RFUSE30 P/N RFZIP6 P/N RBI77KICK14

More information

INSTALLATION INSTRUCTIONS Single Compartment Overhead Console #103

INSTALLATION INSTRUCTIONS Single Compartment Overhead Console #103 INSTALLATION INSTRUCTIONS Single Compartment Overhead Console #103 Please read and fill out the enclosed warranty registration card to activate your warranty. Shipment Contents 103 Loop Bracket Footman

More information

MOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled

MOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled INSTALL INSTRUCTIONS C-DMM-2006 Dash Monitor Mount 2017-2019 F-250, 350, 450 Pickup, F-450 and 550 Cab Chassis, 2015-2019 Ford F-150 and 2018-2019 Expedition Notes: 1. The C-DMM-2000 series Dash Monitor

More information

Air Conditioner for M915 A0/A1 Truck

Air Conditioner for M915 A0/A1 Truck RD-2-4530-0 Air Conditioner for M915 A0/A1 Truck INSTALLATION INSTRUCTIONS Install refrigerant compressor per instructions provided with compressor mount kit. CAUTION: Edges of sheet metal can be sharp!

More information

Installation Instructions

Installation Instructions Installation Instructions Automatic Retracting Running Board Vehicle Application Dodge Ram Quad Cab Pickup 2002-2005 Part Number: 75101-01 Dodge Ram Mega Cab Pickup 2006 - Current Part Number: 75118-01

More information

3-5 Hours Professional installation recommended

3-5 Hours Professional installation recommended I N S T A L L A T I O N G U I D E APPLICATION MODEL YR PART # Toyota Tacoma Double Cab 2016 75162-01A Toyota Tacoma Access Cab* 2016 75162-01A * Modification required to running board assembly. See Item

More information

Ref Qty Part Description Part Number -1- Kit ( ) Contents:

Ref Qty Part Description Part Number -1- Kit ( ) Contents: REAR CANVAS DOOR KIT 900 XP RANGER CREW P/N 2879899 Application RANGER 900 XP CREW Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain

More information

3PC TONNEAU COVER WITH SPORTS BAR INSTALLATION INSTRUCTIONS

3PC TONNEAU COVER WITH SPORTS BAR INSTALLATION INSTRUCTIONS 3PC TONNEAU COVER WITH SPORTS BAR INSTALLATION INSTRUCTIONS TC00d / Vehicle Description: NISSAN NAVARA D0 DUAL CAB 3-PIECE TONNEAU COVER PARTS LIST NO. PART NAME QTY. NO. PART NAME QTY. NO. PART NAME QTY.

More information

Roll Bar (MMRB-6.1 to -6.7)

Roll Bar (MMRB-6.1 to -6.7) 3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com 1994-04 Roll Bar (MMRB-6.1 to -6.7) NOTE: These instructions cover Roll Bars with

More information

James Barone Racing Aftermarket Parts and Accessories

James Barone Racing Aftermarket Parts and Accessories Page1 James Barone Racing Aftermarket Parts and Accessories What you will need: Jack and Jack Stands Drill 1/8 and 1/4 drill bits Ratchet wrench 11mm socket Philips head screw driver Flat head screw driver

More information

QuickChange Strut Brace - Instructions Part Numbers , , , , ,

QuickChange Strut Brace - Instructions Part Numbers , , , , , QuickChange Strut Brace - Instructions Part Numbers 2162200, 2162202, 2162203, 2162204, 2162205, 2162206 Cars applicable: 66-89 911/912/930 Introduction: Congratulations on your purchase of the QuickChange

More information

Installation Instructions PowerBoard Automatic Retracting Running Board

Installation Instructions PowerBoard Automatic Retracting Running Board Installation Instructions PowerBoard Automatic Retracting Running Board Vehicle Application Dodge Ram Quad Cab Pickup 2002-2008 : 75101-15 Dodge Ram Mega Cab Pickup 2006-2009 : 75118-15 www.bestop.com

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 5 ALL VEHICLES KIT FEATURES Equalizer provisions Rear support provisions KIT COMPONENTS 99-7890 INSTALLATION INSTRUCTIONS -SHAFT HEAD UNITS: Snap the Shaft Supports into the Radio Housing. Slide the aftermarket

More information

JEEP JK MANUAL SHIFT 1 1/4 2 / 4 DOOR BODY LIFT

JEEP JK MANUAL SHIFT 1 1/4 2 / 4 DOOR BODY LIFT 92RC60300 JEEP JK MANUAL SHIFT 1 1/4 2 / 4 DOOR BODY LIFT Thank you for choosing Rough Country for your Jeep JK needs. Rough Country recommends a certified technician installs this system. In addition

More information

PRODUCT INSTRUCTIONS

PRODUCT INSTRUCTIONS PRODUCT INSTRUCTIONS Thank you for purchasing genuine Design Engineering, Inc. products. Be sure to always wear the proper safety equipment when installing any DEI product. Design Engineering Inc. WILL

More information

INSTALLATION GUIDE PHANTOM TM SUBWOOFER SYSTEM. FOR BMW 3-SERIES SEDAN (F30) ver. 10/2016 DO-IT-YOURSELF 2 OUT OF HOURS F30 SEDAN

INSTALLATION GUIDE PHANTOM TM SUBWOOFER SYSTEM. FOR BMW 3-SERIES SEDAN (F30) ver. 10/2016 DO-IT-YOURSELF 2 OUT OF HOURS F30 SEDAN INSTALLATION GUIDE PHANTOM TM SUBWOOFER SYSTEM FOR 2012+ BMW 3-SERIES SEDAN (F30) ver. 10/2016 SKILL LEVEL REQUIRED DO-IT-YOURSELF INSTALLATION DIFFICULTY 2 OUT OF 5 INSTALLATION TIME 1.5 HOURS APPLIES

More information

Part Number SP BMW 335i BMW135i 3.0L Twin Turbo L6

Part Number SP BMW 335i BMW135i 3.0L Twin Turbo L6 This kit is equipped with the Injen/AMSOIL Ea nanofiber dry filters, Ea nanofiber filters do not require oil. Part Number SP1125 2007-09 BMW 335i 2008-09 BMW 3.0L Twin Turbo L6 1-2 piece air intake system

More information

Z1 Motorsports 370Z/G37 Oil Cooler Kit Installation Manual

Z1 Motorsports 370Z/G37 Oil Cooler Kit Installation Manual Z1 Motorsports 2877 Carrollton Villa Rica Hwy Carrollton GA 30116 770.838.7777 Z1 Motorsports 370Z/G37 Oil Cooler Kit Installation Manual For 19, 25 and 34 Row Oil Cooler Kits Parts Included: 1 SETRAB

More information

INSTALLATION INSTRUCTIONS C-DMM FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT

INSTALLATION INSTRUCTIONS C-DMM FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT INSTALLATION INSTRUCTIONS C-DMM-123 2013-2018 FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT The Dash Monitor Mount bracket system requires two or three main parts that are sold separately. See

More information

TOOLS REQUIRED: Panel Removal Tool Phillips Screwdriver 10mm Nut Driver Ratchet 10mm Socket 7mm Wrench 7mm Nut Driver Straight Screwdriver

TOOLS REQUIRED: Panel Removal Tool Phillips Screwdriver 10mm Nut Driver Ratchet 10mm Socket 7mm Wrench 7mm Nut Driver Straight Screwdriver CONTENTS: 1EA. FIVE CHANNEL AMPLIFIER/BRACKET ASSEMBLY P/N MPDSP039AA 1EA. OVERLAY HARNESS P/N RH41LX10 3EA. 7MM SCREWS P/N RF7MM 6EA. WIRE TIE P/N RFZIP6 1EA. 30 AMP FUSE P/N RFUSE30 1EA. INSTRUCTIONS

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory S P/N 08V67-SJC-101 Application 2012 RIDGELINE Publications No. AII 12006 Issue Date NOV 2011 PARTS LIST Back-up sensor harness 3 Wire ties with small clips (2 Not used)

More information

FORD F-150 CREW CAB. Vehicle Specific Subwoofer Enclosure. Made in the USA

FORD F-150 CREW CAB. Vehicle Specific Subwoofer Enclosure. Made in the USA FORD F-150 CREW CAB Vehicle Specific Subwoofer Enclosure Made in the USA READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING MOUNTING LOCATION: The enclosure mounts under the rear seat on drivers side of Ford

More information

ROUSH Active Exhaust. Installation Instructions P/N: (R AVC) Fastback GT V8 - Convertible GT V8

ROUSH Active Exhaust. Installation Instructions P/N: (R AVC) Fastback GT V8 - Convertible GT V8 Installation Instructions P/N: 422100 (R1318-5231AVC) Fastback GT V8 - Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active Exhaust Installation Instructions P/N: 422100

More information

Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI

Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI 2008-2014 715500 Subaru Front Mount Intercooler Kit STI 2008-2014 Congratulations on your purchase of the Subaru Front Mount Intercooler Kit STI 2008-2014. The following

More information

Ford F-150 Supercrew A (2004 Heritage) Ford F-150 Super Cab A

Ford F-150 Supercrew A (2004 Heritage) Ford F-150 Super Cab A INSTALLATION GUIDE APPLICATION LENGTH MODEL YR PART # Ford F-150 Supercrew 79 1999-2004 75111-01A (2004 Heritage) Ford F-150 Super Cab 72 1999-2003 75111-01A INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2

More information

InstalL Instructions. jeep yj roll cage kit. kit contents

InstalL Instructions. jeep yj roll cage kit. kit contents InstalL Instructions jeep yj roll cage 300152-2-kit kit contents tube identification 300102-2 300103-2 300104-2 300105-2 300106-2 300107-2 Driver A to B pillar (Qty: 1) Passenger A to B pillar (Qty: 1)

More information

M-9603-FST FOCUS ST COLD AIR INTAKE KIT INSTALLATION INSTRUCTIONS

M-9603-FST FOCUS ST COLD AIR INTAKE KIT INSTALLATION INSTRUCTIONS M-9603-FST Please visit www.fordracingparts.com for the most current instruction information.!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND

More information

Please read thoroughly before starting installation and check that kit contents are complete.

Please read thoroughly before starting installation and check that kit contents are complete. Rear Vision System Mirror Display 2013-Current Ram (Kit part number 1009-9518) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit: Rear

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory S P/N 08V67-SJC-101 Application 2010 RIDGELINE Publications No. AII 42117 Issue Date AUG 2009 PARTS LIST Back-up sensor harness 3 Wire ties with small clip (2 Not used)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Accessory Hands Free Link Application 2008 ACCORD 2 AND 4-DOOR Publications No. AII 38281 Issue Date NOV 2007 PARTS LIST Attachment Kit P/N 08E02-TA0-100 trim retainer

More information

HARD PIPE KIT

HARD PIPE KIT 701550 HARD PIPE KIT 2014 Ford Fiesta ST Congratulations on your purchase of the COBB Hard Pipe Kit for your 2014+ Ford Fiesta ST. The following instructions will assist you through your installation process.

More information

Wildcat System Instructions

Wildcat System Instructions Wildcat System Instructions NOTE: Most steps contained in these instructions will need to be repeated on the other side of the vehicle. Prior to assembly of windshield it is necessary to establish what

More information

The H-MAC Heavy Metal Articulating Chassis Construction Guide

The H-MAC Heavy Metal Articulating Chassis Construction Guide The H-MAC Heavy Metal Articulating Chassis Construction Guide The Heavy Metal Chassis is constructed with two identical drive modules built using 10 mechanical sub-assemblies. The drive modules are integrated

More information

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT.

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT. PAGE 1 0F 6 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT. WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Part# 22-7810 Add On Kit for Your ADS System Contents: Complete Install Kit for Your ARB CKMTA12V Compressor For the most up-to-date instructions please visit www.updownair.com

More information

Mishimoto Performance Aluminum Radiator w/ Stabilizer - Manual (97-04 GT, Mach 1; Cobra)

Mishimoto Performance Aluminum Radiator w/ Stabilizer - Manual (97-04 GT, Mach 1; Cobra) Mishimoto Performance Aluminum Radiator w/ Stabilizer - Manual (97-04 GT, Mach 1; 97-01 Cobra) Installed on: 2000 Mustang GT (manual transmission) Tools: 8mm socket 10mm socket 13mm socket 3/4" wrench

More information

Remove the 3-11mm nuts holding mirror on. Don t drop the nuts!

Remove the 3-11mm nuts holding mirror on. Don t drop the nuts! 2005-2012 Ford Mustang Puddle Lamp Kit Parts List: Quantity: Tool List: LED Lamps 2 Flat head screwdriver Seals 2 Ratchet & Socket set OR Nuts 2 Adjustable Wrench Wiring harness 1 Drill & 11/16 th bit

More information

Drag Race Roll Bar (MMRB-6, -7)

Drag Race Roll Bar (MMRB-6, -7) 3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com 1994-04 Drag Race Roll Bar (MMRB-6, -7) The Maximum Motorsports 6-point Drag Race

More information

2010+ Audi B8 S4/S5 3.0T S-FLO Intake Kit INSTALLATION GUIDE FOR RACING USE ONLY

2010+ Audi B8 S4/S5 3.0T S-FLO Intake Kit INSTALLATION GUIDE FOR RACING USE ONLY INSTALLATION GUIDE 2010+ Audi B8 S4/S5 3.0T S-FLO Intake Kit FOR RACING USE ONLY Congratulations on your purchase of the AWE Tuning S-FLO Intake for the 2010+ Audi B8 S4 and B8 S5 3.0T. Exquisite build

More information

INSTALLATION MANUAL

INSTALLATION MANUAL INSTALLATION MANUAL 2563000 Parts List 1 Carrier weldment 2 Support arm assembly 1 Third brake light assembly 1 Light extension bracket 1 Spare tire adjustment plate 1 Spare tire mount plate 1 Female spade

More information

Z1 Motorsports 350Z / G35 Oil Cooler Kit Installation Manual

Z1 Motorsports 350Z / G35 Oil Cooler Kit Installation Manual Z1 Motorsports 2877 Carrollton Villa Rica Hwy Carrollton GA 30116 770.838.7777 Z1 Motorsports 350Z / G35 Oil Cooler Kit Installation Manual For 19, 25 and 34 Row Oil Cooler Kits Parts Included: 1 Aluminum

More information

TESLA MODEL S REAR UNDER SPOILER & DIFFUSER SYSTEM

TESLA MODEL S REAR UNDER SPOILER & DIFFUSER SYSTEM TESLA MODEL S Thank you for purchasing your Unplugged Performance Rear Under Spoiler & Diffuser System for the Tesla Model S! Please read this manual carefully prior to installation. REAR UNDER SPOILER

More information

Technical Support (707)

Technical Support (707) Installation Instructions CONSOLE MEGASHIFTER Fits: 1982-1992 Camaro & Firebird w/automatic Transmission *except 1988-1992 Firebird Formula Model Catalog # 80692 WORK SAFELY! For maximum safety, perform

More information

Installation Instructions 2019 Chevy and GMC 1500 Rear Bumper Product Number: E4050, E4051 Application: Chevy and GMC 1500 Trucks

Installation Instructions 2019 Chevy and GMC 1500 Rear Bumper Product Number: E4050, E4051 Application: Chevy and GMC 1500 Trucks IMPORTANT SAFETY GUIDE Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided the following warnings, safety precautions, installation

More information

Acura/Honda/Isuzu AT-807HD, IBR-807HD, CF-807HD, AW-807HD

Acura/Honda/Isuzu AT-807HD, IBR-807HD, CF-807HD, AW-807HD Installation instructions for part Acura/Honda/Isuzu 1988-2006 99-7898 AT-807HD, IBR-807HD, CF-807HD, AW-807HD WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: Not Required KIT FEATURES DIN

More information

Amp & Speaker Upgrade Install Instructions for Victory Cross Country

Amp & Speaker Upgrade Install Instructions for Victory Cross Country Amp & Speaker Upgrade Install Instructions for Victory Cross Country Tools Needed: 13mm Socket 4mm Ball Head Allen Socket 5mm Allen Wrench 10mm Wrench Wire Cutters Wire Strippers Phillips Screwdriver Pocket

More information

Upper Class Grille Main grille INSERT - #54127 / #54131 / #54133 / #51127 / #51131 / 51133

Upper Class Grille Main grille INSERT - #54127 / #54131 / #54133 / #51127 / #51131 / 51133 Parts included (1) - Main Full Opening - Polished - Part #54127 OR 1 Bar - Polished - Part #54131 OR 2 Bar - Polished - Part #54133 OR Full Opening - Black - Part #51127 OR 1 Bar - Black - Part #51131

More information

IE Audi B9 S4, S5, A4, A5, Allroad FDS Intercooler Install Guide IETPCK1

IE Audi B9 S4, S5, A4, A5, Allroad FDS Intercooler Install Guide IETPCK1 IE Audi B9 S4, S5, A4, A5, Allroad FDS Intercooler Install Guide IETPCK1 Thank you for purchasing the best performing intercooler on the market! This instruction guide is used for installation of IE s

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 9002-6513 Rear Vision System W/ Zoom Aftermarket and Factory 8.4 Touch Screen Display (Factory Display requires Chrysler/Dodge dealer to activate) 2009 2012 RAM (Part B) 2013 Current RAM (Part A) NOTE:

More information

Installation Instructions For Part Number: Intake kit with scoop

Installation Instructions For Part Number: Intake kit with scoop Installation Instructions For Part Number: 883-282 Intake kit with scoop 2008-14 Polaris Ranger RZR 800 Tools Required For Installation: 7/16 and 1/2 Wrenches. 10mm, 7/16, and 1/2 Sockets. T-25 Torx driver.

More information

TORCH Main Grille Main grille INSERT - # / # Chevrolet Silverado

TORCH Main Grille Main grille INSERT - # / # Chevrolet Silverado Parts included (1) TORCH Grille - Main (1) 40 LED - Part #6311271 OR Stealth - Part #6311271-BR OR (1) 30 LED - Part #6311281 OR Stealth - Part #6311281-BR Hardware included (1) - Large Bottom Mounting

More information

BMW E61 Hydraulic Pump replacement instructions

BMW E61 Hydraulic Pump replacement instructions BMW E61 Hydraulic Pump replacement instructions This DIY will guide you through the tasks needed to successfully replace your defective tailgate hydraulic pump Difficulty 3 of 10. The most difficult part

More information

SCION XB SUBWOOFER ENCLOSURE Preparation

SCION XB SUBWOOFER ENCLOSURE Preparation Preparation Part Number: Kit Contents Item # Quantity Reqd. Description 1 1 Subwoofer enclosure 2 1 Wire Harness 3 1 Paper Template 4 1 Plastic Drill Template 5 1 Hardware Bag Hardware Bag Contents 1 Item

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INC. INSTALLATION INSTRUCTIONS APPLICATION: DODGE CHARGER POLICE PUSH BAR (2011 & UP) APP PART # 36-2035 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 PUSH BAR ASSEMBLY RATCHET 2,3 2

More information

Lexus NX Fine Mesh and Dynamic Radar Cruise Control Fine Mesh Grilles

Lexus NX Fine Mesh and Dynamic Radar Cruise Control Fine Mesh Grilles IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2015-16 Lexus NX Fine Mesh and Dynamic Radar Cruise Control Fine Mesh Grilles Upper Insert - factory chrome surround and emblem reused

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory ACCESSORY HANDSFREELINK Application 2010 ACCORD 2 AND 4-DOOR Publications No. AII 42231 Issue Date AUG 2009 PARTS LIST HFL retainer HFL Attachment Kit P/N 08E02-TA0-100

More information

PRO RATCHET UNIVERSAL SHIFTER

PRO RATCHET UNIVERSAL SHIFTER Installation Instructions PRO RATCHET UNIVERSAL SHIFTER Fits: GM, Ford and Chryslers w/automatic Transmission See Application Guide for Specific Vehicles Catalog # 80842 WORK SAFELY! For maximum safety,

More information

RCA PLUG KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.

RCA PLUG KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com. RCA PLUG KIT P/N 2883824 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation

More information

Installation Instructions Z-Gate Shifter

Installation Instructions Z-Gate Shifter Installation Instructions Z-Gate Shifter Part Number 80681 1998, 2001 by B&M Racing and Performance Products The B&M Z-Gate shifter can be used in vehicles equipped with most popular three speed automatic

More information

Installation Instructions

Installation Instructions Installation Instructions (2) 10-24 Black flathead Allen Screws Tailgate End Front Cover Passenger Side Rail (has inspected by sticker under rail) (4) 10-32 Screws (stainless) Front Cover Exploded View

More information

DODGE RAM QUAD CAB. Vehicle Specific Subwoofer Enclosure. Made in the USA

DODGE RAM QUAD CAB. Vehicle Specific Subwoofer Enclosure. Made in the USA DODGE RAM QUAD CAB Vehicle Specific Subwoofer Enclosure Made in the USA READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING MOUNTING LOCATION: The enclosure mounts under the rear seat on Dodge Quad Cab Trucks.

More information

How to Replace the Main Axle Gear on the Bachmann Spectrum GScale using the NWSL # upgrade gear.

How to Replace the Main Axle Gear on the Bachmann Spectrum GScale using the NWSL # upgrade gear. How to Replace the Main Axle Gear on the Bachmann Spectrum GScale 4-4-0 and 2-6-0 Mogul (2001era), using the NWSL #2223-6 upgrade gear. By Paul M. Newitt (all text and photos Copyright Paul M. Newitt,

More information

MGB Alternator Conversion Installation Instructions For MGA & 1962 to 1967 MGB

MGB Alternator Conversion Installation Instructions For MGA & 1962 to 1967 MGB MGB Alternator Conversion Installation Instructions For MGA & 1962 to 1967 MGB PART# 130-078, 130-088, 130-098 440 Rutherford St. Goleta, CA 93117 1-800-642-8295 FAX 805-692-2525 www.mossmotors.com Scan

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Accessory Hands Free Link Application 2009 ACCORD 2 AND 4-DOOR Publications No. AII 40055 Issue Date JULY 2008 PARTS LIST HFL Attachment Kit P/N 08E02-TA0-100 HFL trim

More information