Introduction Components...3. Functional Description Features Standard Monitoring Functions Alarm Definition...

Size: px
Start display at page:

Download "Introduction Components...3. Functional Description Features Standard Monitoring Functions Alarm Definition..."

Transcription

1 Monitoring

2 Index Introduction... 2 Components...3 Functional Description... 6 Features... 8 Standard Monitoring Functions... 9 Alarm Definition... 9 Technical Data...11 Miscellaneous...13 Applications...16 Examples Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

3 Introduction The Geislinger Monitoring GMS Mark4 (4 th generation) is an instrument designed to continuously monitor the torsional vibration amplitudes e.g. of a reciprocating internal combustion engine. The main advantages of the Geislinger Monitoring are: Optimum operation of the engine due to early detection of problems. Monitoring of a damper/coupling to determine the exact condition of the damper/coupling before an engine overhaul or dry docking. If the evaluation of the measurements shows that the damper/coupling is working properly, it can be justified in front of the classification society, that no overhaul is necessary. Should an overhaul be necessary it can be planned and the spare parts can be ordered in time. Reduction of maintenance cost and time during dry docking or engine overhaul. Increased life of the GMS Mark 4 monitored installation with longer inspection intervals. Easy to use for torsional vibration measurements Geislinger quality and worldwide after sales service Power Monitoring with high accuracy The system gives an alarm signal when safety limits are reached or exceeded, it also indicates engine speed and operating hours. Furthermore, it can measure torsional vibration amplitudes, analyze the results and transmit them to a PC. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

4 Components The Geislinger Monitoring consists of three main components: Digital sensors Junction Box System Unit System Unit Sensor 2 Outer part Junction Box Sensor 1 Inner part Fig.1 General arrangement of components Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

5 Digital Sensors The measurement is usually achieved with digital sensors of an inductive type, which are mounted in a fixed position and measure against rotating wheels with teeth. If no such wheels are available, the use of angular encoders is also possible. Junction Box At the Junction Box, the cables of all sensors are formed into a single cable which leads to the System Unit. The signals from the sensors are converted and transmitted to the System Unit. System Unit The System Unit contains a LCD display, three alarm lights, four push buttons and a printed circuit board equipped with a microprocessor which calculates primarily the phase velocity of rotating elements. By means of measurements from one or two torsionally vibrating elements (e.g. on a coupling or damper), the values of the static and dynamic twist between the elements as well as the vibratory angle of the elements are calculated. The calculated torsional vibration values and other parameters are shown on the LCDdisplay as a graph or as FFT analyzed values. The power supply for the Geislinger Monitoring and the alarm outputs (relay and analog outputs) for e.g. a ship control system are at the rear of the System Unit. A serial communication port RS232 for measurements and programming is also included in the System Unit. Cabling All cables are supplied by the customer. This includes also the cable between System and Junction Box. The cables must be approved by the classification society. Between System Unit and Junction Box, Geislinger recommends a cable with a common copper screen, 6 conductors in pairs, each conductor with a minimum cross section of 0.5 mm². Unit Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

6 General Arrangement of the Components The sensors are equipped only with short cables to avoid distortion of the signal. Therefore the Junction Box has to be placed close to the sensors (max. distance = 1.7m). The Junction Box can be mounted directly on to the engine or damper housing by welding the mounting plate to the engine or damper housing and screwing the Junction Box on the plate. The System Unit is normally placed in the engine control room. For dimensions of installation openings and mounting holes see chapter. ( Technical Data ) System Unit Junction Box Sensors Cabling Installed in the engine control panel in the engine control room Close to sensors (max 1.7m), can be mounted directly to engine or damper housing Adjustable inductive sensors installed in fixed position with brackets inside the damper housing, bracket with inspection hole and oil tight cable gland. All cables are supplied by the customer. This includes also the cable between System Unit and Junction Box. The cables must be approved by the respective classification society. Between System Unit and Junction Box Geislinger recommends a cable with a common copper screen, 6 conductors in pairs, each conductor of a minimum cross section of 0.5 mm². Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

7 Functional Description Display and Buttons LED s LCD display area push buttons cover of serial communication line Fig.2 Front of System Unit The System Unit has 4 push buttons and 3 LED s. monitoring function no. 1 area for alarms monitoring function no. 2 monitoring function no. 3 area for messages Fig.3 Display description engine speed operating hours; values in decimal format: 3.50 = 3 hours 30 minutes Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

8 Monitoring Function number of monitoring function name of monitoring function minimum value (bar graph) bar graph maximum value (bar graph) actual value (unit is milliradian) WARNING LOW limit (if defined) WARNING HIGH limit ALARM limit Fig.4 Description of a Geislinger Monitoring function Normal Operation The Geislinger Monitoring is starting up automatically after electrical power is connected. During operation the readings are taken from the sensors and processed simultaneously. The computed values of the monitoring functions are shown both as numbers and as bar graph on the display. Depending on the engine speed, the system reads the appropriate limits from the memory and compares these values with the ones computed. The limits are also shown in the bar graph. If a value is over a warning or alarm limit the following happens: On the right side of the screen the monitoring function, a warning or an alarm will appear. The corresponding relay output is opened. The corresponding LED is illuminated. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

9 Features In the following section some features of the Geislinger Monitoring are described. Signalcurve Shows the torsional vibration signal for each programmed application per one revolution. Fourier Shows the amplitude of the different orders for each application after a FFT (Fast Fourier Transformation) analysis. Fig.5 Signal curve graphics Info Submenu Contains general information about the programmed monitoring functions and current serial communication line settings. The programmed alarm curves are also shown in a graphical mode. Serial Communication Line RS232 for Connection to a PC The Geislinger Monitoring is equipped with a standard RS232 communication interface located on the front of the System Unit. It is possible to transmit measured and analyzed values to a PC for further calculations. At the PC the values can be recorded with a simple terminal program, which is included in every Microsoft Windows software. The graphic evaluation of the recorded values can be carried out by a standard spreadsheet like Microsoft Excel. Fig.6 Fourier graphics Fig.7 Programmed alarm curves Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

10 Standard Monitoring Functions Free End Total This monitoring function shows the synthesis of the vibratory angle at the free end of the crankshaft. Reduction in power, cylinder failure or cylinder misfiring influence the vibratory angle at the free end of the crankshaft. For this monitoring function the sensor signal is acquired directly from the crankshaft or damper inner part (damper inner part is bolted to the crankshaft). Free End Filtered This application calculates the vibratory angle of a single order or a range of orders out of the synthesis of the vibratory angle at the free end of the crankshaft. In many propulsion systems only a specific order, or a range of orders caused by torsional vibrations is responsible for critical shaft, crankshaft or intermediate shaft vibratory stresses. Monitoring the amplitude of this order is a proper method for detecting dangerous operating conditions. For this monitoring function the same sensor signal as in monitoring function Free End Total is used. Damper Twist Shows the vibratory twist angle between damper inner part and damper outer part. This application controls the damper load. Dysfunctional oil supply or heavy wear of the damper springs leads to an increased vibratory twist. This will activate an alarm on the Geislinger Monitoring. A blocked damper with no vibratory twist causes also an alarm, because other parts of the propulsion system (e.g. crankshaft, intermediate shaft) are overloaded if the damper does not work. Monitoring of the damper is also very useful for determining the exact condition of the damper before an engine overhaul or drydocking. If the measurements show that the damper is working properly, it can be justified in front of the classification society, that no damper overhaul is necessary. In the case that spare parts are needed they can be ordered in time. Alarm Definition After the CPU has calculated the vibratory angle or vibratory twist, the results are evaluated against limit curves. Limit curves are defined as continuous lines with a maximum of 20 supporting points. Each point is defined by its coordinates. The unit of the x coordinate is rpm (or the static twist in case of coupling monitoring), the unit of the y coordinate is milliradian. It is possible to monitor only a part of the speed range. The WARNING LOW curve is normally only defined for monitoring of damper or coupling twist. To avoid nuisance alarms, an actual alarm is triggered only if several alarm points occur in sequence. This number of sequential alarm points is defined in the setup. If an alarm is activated, usually a Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

11 message appears on the display, a LED is illuminated on the display and an alarm relay is activated. For special applications the Geislinger Monitoring can be programmed in a way that warnings or alarms from certain monitoring functions are not connected to the relay output. Levels may sometimes exceed the WARNING limit because of abnormal engine handling, but this should not be the normal condition. ALARM limits must not be reached or even exceeded. WARNING LOW curve actual calculated value Warning limit WARNING LOW Alarm limit IDEAL FIRING WARNING HIGH ALARM normal operating graph operating range not monitored permissible operating range Fig. 8 Alarm definition Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

12 Technical Data Specifications Permissible ambient temperature System Unit Junction Box Inductive sensors 55 Celsius (131 F) 70 Celsius (158 F) 100 Celsius (212 F) Power supply Voltage: 24V DC 20% Maximum current consumption: 1 Ampere Technical standards Electrical and environmental testing according to IACS E 10 rules and type approval from DNV Outputs 4 relay outputs (max. 24 VDC, 1 Ampere) 1 analogue output ( ma) 1 serial communication line RS232 Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

13 Dimensions and Weights System Unit 192 x 147 mm, (approx. L x W = 7.6 x 5.8 ) approx. 135 mm deep (5.3 ) (including space for cables at rear) weight: 1.5 kg (3.3 lbs) 8 x Installation depth: outer dimensions of System Unit: 192 x 147 mm 135mm M Fig.9 Assembly opening for System Unit Junction Box 130 x 130 mm (Approx. L x W = 5.1 x 5.1 ) (including space for cable glands) 60 mm high (2.4 ) weight: 0.6 kg (1.3 lbs) Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

14 Miscellaneous What are Torsional Vibrations? Torsional vibrations are the result of pulsating, dynamic torques of a reciprocating combustion engine and the propeller. All system components like crankshaft, intermediate shaft, propeller shaft and optional couplings and gears have to transmit the static torque and the additional vibratory torque. The Geislinger Monitoring monitors the torsional vibrations. Torsional Vibration Terms order... vibration frequency divided by speed synthesis... summary of single orders FFT... Fast Fourier Transformation frequency analyzed vibration Description of Signal Processing A sensor mounted on a fixed position measures against a rotating toothed wheel. Instead of a sensor also an angular encoder supplying a digital signal can be used. The encoder can be mounted on the front end of a wheel or shaft. The signal of the sensor switches from low output to high output when a tooth passes the tip of the sensor. The signal is the elapsed time (pulse duration) between one tooth and the next tooth (see Fig. 10). The measured pulse duration is proportional to the angular velocity. A microprocessor records the signal of the last ten revolutions. On demand this sample of ten revolutions is used for further signal processing. sensor sensor signal t1 t2 t3 t4 t5 t high low Fig.10 Signal processing Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

15 A plot of time over angle yields a graph shown in Fig.11. The mean time between two teeth (constant angular velocity or rpm) can be subtracted. time t3 t1 t2 t4 t5 t6 t7 t8 t9 mean time between two teeth angle Fig.11 Plot of Sensor Signal To obtain the peaks of the signal, it is necessary to do oversampling (insert additional generic points). Another necessary step is to calculate from time differences to angle differences by use of the angular velocity. vibratory angle generic points t1 t2 t3 t4 t5 t6 t7 t8 t9 angle Fig.12 Signal oversampling After these calculation steps (result is shown in Fig.12) the signal passes through a bandpass filter (Fig.13). The purpose of the bandpass filter is to remove accelerations (caused by the engine speed control system) through removing low orders (below the first order in case of 2 cycle engines, below the 0.5th order in case of 4 cycle engines) and to smoothen the signal by interpreting the additional inserted points as high frequent interferences (this is necessary to obtain the exact amplitude of the vibratory angle). Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

16 Bandpass filter order vibratory angle max amplitude = (max min) / 2 angle min Fig.13 Results of signal filtering The result of the filtered values is the ±vibratory angle of the synthesis of a specified range of orders (Fig.13) depending on the filter settings. The quality of the filters allows filtering of just one order or half orders. The last step is to calculate the amplitude by: (maximumminimum)/2 of the vibratory (twist) angle and check this value against safety limits. These limits are depending on the engine speed (rpm). For explanation of alarm limits see chapter Alarm Definition. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

17 Applications In the following catalog section the various possible Geislinger Monitoring applications are described. Free End Monitoring This option calculates the synthesis of all orders of the absolute vibratory angle of a rotating part by means of a sensor signal. Also a range of orders or a single order can be filtered. Only one sensor (inductive sensor or angle encoder) is used. Typical applications for Free End Monitoring are: Misfiring Detection The synthesis of the vibratory angle at the free end of the crankshaft indicates how smooth the Fig.14 Free End Monitoring engine is running. Misfiring of one or more cylinders of a combustion engine will cause an increase of torsional vibrations (increased amplitude of the synthesis of the vibratory angle) and may result in a damage of certain components. Shaft Stress, Crankshaft Stress or Intermediate Shaft Stress Monitoring In many propulsion systems only a specific order is responsible for critical shaft, crankshaft or intermediate shaft stresses caused by torsional vibrations. Monitoring of the amplitude of this order is a proper method to detect dangerous operating conditions. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

18 Damper Monitoring This option includes the monitoring of the synthesis of the vibratory twist angle between two rotating parts. The two rotating parts are combined elastically. Two sensors are necessary. From the signal of each sensor the synthesis of all orders of the absolute vibratory angle is calculated. The synthesis of the amplitude of the difference between these values is monitored. Fig.15 Damper Monitoring Damper Monitoring is mainly used for: Monitoring of the vibratory twist angle between damper inner part and damper outer part is necessary for controlling the damper load. Dysfunctional oil supply or heavy wear of the damper springs leads to an increased vibratory twist. This will activate an alarm in the Geislinger Monitoring. A blocked damper with no vibratory twist causes also an alarm, because other parts of the propulsion system (e.g. crankshaft, intermediate shaft) are overloaded. Monitoring of the damper is also very useful to determine the exact condition of the damper before an engine overhaul or dry docking. If the measurements show that the damper is working properly, it can be justified in front of the classification society, that no damper overhaul is necessary. In the case that spares parts are needed, they can be ordered in time. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

19 Coupling Monitoring Monitors the synthesis of the vibratory twist angle between two rotating parts with a static offset, caused by torque. Based on the measured static twist, computing of the transmitted torque and power is possible. The two rotating parts are combined elastically. For this monitoring function two sensors are necessary. Both rotating parts Fig.16 Coupling Monitoring must have a reference mark (a longer gap or tooth), which is used for recognizing the static offset. The torsional stiffness of the monitored part can be entered as a cubic polynom and is used for calculating torque and transmitted power. Coupling Monitoring is mainly used for: One sensor is mounted on the power input side, the other on the power output side of the coupling. Monitoring of the vibratory twist angle between coupling inner part and coupling outer part is necessary to control the coupling load. Dysfunctional oil supply or heavy wear of the Geislinger Coupling springs due to overload leads to an increased vibratory twist. This will activate an alarm in the Geislinger Monitoring System. A blocked coupling with no vibratory twist causes also an alarm, because other parts of the propulsion system are overloaded. Monitoring of the coupling is also very useful to determine the exact condition of the coupling before an engine overhaul or dry docking. If the measurements show that the coupling is working properly, it can be justified in front the classification society that no coupling overhaul is necessary. In the rare case that spares parts are needed, they can be ordered in time. Shaft Monitoring Shaft monitoring is similar to coupling monitoring. The only difference is that the stiffness of the springs is substituted by the stiffness of the shaft. The accuracy of the measured torque increases with the distance between the sensors (= length of shaft) and the data quality of the shaft dimensions. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

20 Power Monitoring As the name indicates the system provides a reliable propulsion power monitoring. As in most ships steel shaft lines are used, the Geislinger Power Monitoring is based on twist measurement. The steel shafts in spite of their size provide certain elasticity and thus twist under engine load and torsional vibrations. The Geislinger Power Monitoring measures this behaviour via sturdy measuring gear rings and robust, reliable inductive sensors. Fig.17 Power Monitoring Precise algorithms detect the torsional vibrations and provide an exact overview of static twist the engine output and shaft line vibrations. This simple and compact concept avoids error prone radio based signal transmission as well as strain gauges. Power Monitoring is mainly used for: The Geislinger Power Monitoring is perfectly suitable for installation on existing propulsion systems as well as on new ships. It provides the master an easy tool for economic ship operation: If the speed is reduced it is possible to directly see the influence on the engine output for example 20 percent speed reduction result in almost 45% less engine power consumption. This can be directly converted into fuel savings. In such a way it is possible to optimize the overall fuel consumption. The Geislinger Power Monitoring is also suitable to effortlessly detect increased fuel consumption due to unfavourable currents or natural cover and thus enables the master to take the suitable countermeasures. This is especially important for speed controlled engines. Benefits A big bonus of the Geislinger Power Monitoring is that it not only provides a precise power measurement onboard, it additionally monitors continuously the vibration behaviour of the shaft line. As ships become more and more complex and ship staff becomes a short resource, this is a safety element which is getting more and more important. In this way critical load conditions are detected and an alarm signal is transferred to the ship alarm system. Thus damage of the propulsion system and related ship accidents can be avoided. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

21 Examples Geislinger Monitoring used for Damper Monitoring Damper type: D 260/17 + Geislinger Monitoring Damper outer diameter: Nominal damper twist: 2600 mm 3.5 mrad This damper is designed to protect the crankshaft and therefore an important part of the main engine. Sensor 2 Junction Box Sensor 1 Fig.18 Example for Damper Monitoring Sensor 1 is mounted near the damper inner part, sensor 2 is mounted near the damper outer part. This installation is an example for the high accuracy of the Geislinger Monitoring System, because the vibratory angles are very low. In case of damper twist: 3.5 mrad; in case of free end filtered (9th order): 1.75 mrad. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

22 Geislinger Monitoring used for Coupling Monitoring Coupling type: BE 180/22.5/126U + GFL S112 F8 + Geislinger Monitoring Coupling outer diameter: Performance data: 1800 mm kw, 308 rpm, torque: 403 knm The combination of Geislinger Flexlink and Geislinger Coupling is mounted between an electric motor and a pod propeller unit. The system is designed to protect the pod propeller and to compensate for misalignments. Sensor 2 Sensor 1 Fig.19 Example for Coupling Monitoring Sensor 2 is mounted near the outer part of the Geislinger coupling (input of torque), sensor 1 is mounted near the outer part of the Geislinger Flexlink coupling (output of torque). Through this arrangement both couplings are monitored. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

23 Geislinger Monitoring used for Power Monitoring The Power Monitoring is installed on ships' propeller shafts allowing the output propeller power to be monitored as part of the overall ship's fuel usage optimisation control system. Sensor 2 (turn wheel gear) Shaftline Sensor 1 (measuring gear at aft flange) Monitoring Unit optional Display Fig.20 Example for Power Monitoring Sensor 2 is mounted at the flywheel position of the engine (input of torque), sensor 1 is mounted at the measurement ring position of the propeller side (output of torque). In common the system unit is located in the engine control room. To show the monitored power also on the bridge of the vessel it is also possible to install an optional second display. Geislinger GmbH, 5300 Hallwang, Austria Monitoring Catalog: Version 5.1 September / 22

24 Geislinger Coupling Geislinger Damper Geislinger Gesilco Geislinger Flexlink Geislinger Monitoring Geislinger Carbotorq Geislinger Vdamp Geislinger GmbH A-5300 Hallwang/Salzburg, Austria Hallwanger Landesstrasse 3 Tel. +43/662/ Fax +43/662/ info@geislinger.com

25 Geislinger Coupling Geislinger Damper Geislinger Gesilco Geislinger Flexlink Geislinger Monitoring Geislinger Carbotorq Geislinger Vdamp Geislinger GmbH A-5300 Hallwang/Salzburg, Austria Hallwanger Landesstrasse 3 Tel. +43/662/ Fax +43/662/ info@geislinger.com

GEISLINGER MONITORING

GEISLINGER MONITORING GEISLINGER MONITORING GEISLINGER MONITORING The Geislinger Monitoring System (GMS) is a continuous monitoring and measuring system for rotating components. It is intended for use in a wide range of applications,

More information

LIGHTWEIGHT GEISLINGER GESILCO SHAFT

LIGHTWEIGHT GEISLINGER GESILCO SHAFT LIGHTWEIGHT GEISLINGER GESILCO SHAFT GEISLINGER GESILCO SHAFT The Geislinger Gesilco shaft product range is based on more than 20 years experience in developing fibre composite couplings and shafts. The

More information

Geislinger Damper. The smallest possible damper for each engine

Geislinger Damper. The smallest possible damper for each engine The Geislinger damper is capable of adjusting the natural frequency of a system and of reducing torsional vibration. Thus it reliably protects the crankshafts, camshafts, intermediate and propeller shafts

More information

MARINE RAIL MINING OIL & GAS POWER GENERATION

MARINE RAIL MINING OIL & GAS POWER GENERATION MARINE RAIL MINING OIL & GAS POWER GENERATION . LEADERS IN ENGINEERING. RAIL OIL & GAS Geislinger develops and produces torsion- outstanding service life and a very high times, Geislinger locations and

More information

Lightweight. Geislinger Gesilco

Lightweight. Geislinger Gesilco Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes

More information

THE FIBRE COMPOSITE PRODUCT LINE BY GEISLINGER

THE FIBRE COMPOSITE PRODUCT LINE BY GEISLINGER THE FIBRE COMPOSITE BUILT TO LAST. THE COMPACT AND LIGHTWEIGHT GESILCO DESIGN PAVES THE WAY FOR GREAT OPPORTUNITIES. For 60 years Geislinger has been driven by its inventive spirit to develop innovative

More information

FATIGUE RESISTANT & MAINTENANCE- FREE GEISLINGER COMPOWIND

FATIGUE RESISTANT & MAINTENANCE- FREE GEISLINGER COMPOWIND FATIGUE RESISTANT & MAINTENANCE- FREE GEISLINGER COMPOWIND Courtesy of Vestas Wind Systems A/S GEISLINGER. LEADERS IN ENGINEERING. Geislinger develops and produces torsional vibration dampers, torsional

More information

MAGTROL. TF Series Torque Flange Sensor. TF data sheet FEATURES. DESCRIpTION. AppLICATIONS

MAGTROL. TF Series Torque Flange Sensor. TF data sheet FEATURES. DESCRIpTION. AppLICATIONS data sheet Series Torque Flange Sensor FETURES Complete torque measuring system consisting of: Measuring flange with signal amplifier HF transmitter Conditioner 4 m coaxial cable Contactless signal transmission:

More information

CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines

CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines CPU-95EVS Enhanced VariSpark Digital Ignition System for Industrial Engines Features VariSpark Spark Profile Control Users can select from one of six VariSpark spark energy profiles embedded within the

More information

Sensor-Bearing Units Steer-By-Wire Modules Mast Height Control units Other sensorized units

Sensor-Bearing Units Steer-By-Wire Modules Mast Height Control units Other sensorized units Mechatronics Sensor-Bearing Units... 957 Steer-By-Wire Modules... 967 Mast Height Control units... 969 Other sensorized units... 971 955 Sensor-Bearing Units SKF Sensor-Bearing Units... 958 SKF Explorer

More information

EMC-HD. C 01_2 Subheadline_15pt/7.2mm

EMC-HD. C 01_2 Subheadline_15pt/7.2mm C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder

More information

PROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment

PROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing

More information

MIC4 IGNITION CONTROLLER

MIC4 IGNITION CONTROLLER MIC4 IGNITION CONTROLLER MIC4 MOTORTECH IGNITION CONTROLLER Try the alternative. Call the nearest MOTORTECH sales partner for more information. REV.02/2015 MIC4 IGNITION CONTROLLER The economically attractive

More information

Data Sheet Type FF420. Series 420 Specification Flange / Flange. Series 420 Non-Contact Rotary Torque Transducer

Data Sheet Type FF420. Series 420 Specification Flange / Flange. Series 420 Non-Contact Rotary Torque Transducer Datum Electronics has further extended its standard range of torque transducers to cater for higher rotary speeds and an increased number of torque ranges. The 420 Series torque transducers operate with

More information

General Description. BADICHEQ 3000 (Battery Diagnostic & Charge Equalizing) The compact solution for perfect battery management

General Description. BADICHEQ 3000 (Battery Diagnostic & Charge Equalizing) The compact solution for perfect battery management General Description BADICHEQ 3000 1 Chapter1: Introduction I: The problem General Description BADICHEQ 3000 (Battery Diagnostic & Charge Equalizing) The compact solution for perfect battery management

More information

INTRODUCTION SBPT DIAPHRAGM COUPLING: FEATURES APPLICATION

INTRODUCTION SBPT DIAPHRAGM COUPLING: FEATURES APPLICATION INTRODUCTION SBPT is an ISO 9001: 2000 certified company, specializing in Design and Manufactures of highly flexible Diaphragm Coupling since 1994. Advance analysis and manufacturing process have produced

More information

Servo-pneumatic drive solution for welding guns. Top quality welding!

Servo-pneumatic drive solution for welding guns. Top quality welding! Servo-pneumatic drive solution for welding guns Sturdy and precise! Top quality welding! Highlights Extremely short cycle times High quality and outstanding reproducibility of the spot welds Excellent

More information

CENTA POWER TRANSMISSION CENTAMAX ENGLISH. Is this PDF up to date? click here for an update check!

CENTA POWER TRANSMISSION CENTAMAX ENGLISH. Is this PDF up to date? click here for an update check! CENTA POWER TRANSMISSION CENTAMAX ENGLISH Is this PDF up to date? click here for an update check! CENTAMAX ROBUST. FOR TORSIONALLY ACTIVE DRIVES. SYSTEM COUPLING COMPONENTS TYPES APPLICATIONS TECHNICAL

More information

ST48-WHUV.102. Wiring diagram. Product description. PID controller. Order number

ST48-WHUV.102. Wiring diagram. Product description. PID controller. Order number ST48-WHUV.12 PID controller Order number 935.15 Wiring diagram Product description This micro-processed controller serves for temperature control at high measuring accuracy. Beside resistance sensors and

More information

M-18 Controllable-Pitch Propeller

M-18 Controllable-Pitch Propeller Guideline No.M-18(201510) M-18 Controllable-Pitch Propeller Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements,

More information

Copyright AREVA Wind/Jan Oelker. in wind turbines

Copyright AREVA Wind/Jan Oelker. in wind turbines Copyright AREVA Wind/Jan Oelker Sensors and control systems in wind turbines 3 1 7 6 8 4 2 5 9 Sensors and control systems 15 years of experience and more than 30,000 installations worldwide Modern wind

More information

Measuring equipment for the development of efficient drive trains using sensor telemetry in the 200 C range

Measuring equipment for the development of efficient drive trains using sensor telemetry in the 200 C range News Measuring equipment for the development of efficient drive trains using sensor telemetry in the 200 C range Whether on the test stand or on the road MANNER Sensortelemetrie, the expert for contactless

More information

RIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at

RIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at 117 Table of contents 117 Coupling selection steel laminae coupling 119 Description of coupling 121 General information 122 Types and applications 123 Technical data 124 Standard types 126 Special types

More information

HYDRUS ULTRASONIC METER

HYDRUS ULTRASONIC METER APPLICATION Static ultrasonic water meter for accurate measuring and recording for all applications of water supply. FEATURES 4 Real data communication, open metering telegram 4 Long-term stability under

More information

mass flowmeter for compressed air

mass flowmeter for compressed air mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

Intelligenter, miniaturisierter und langzeitstabiler Zylinderdrucksensor mit integrierter Klopfanalyse zur Druckregelung an Gasmotoren

Intelligenter, miniaturisierter und langzeitstabiler Zylinderdrucksensor mit integrierter Klopfanalyse zur Druckregelung an Gasmotoren Intelligenter, miniaturisierter und langzeitstabiler Zylinderdrucksensor mit integrierter Klopfanalyse zur Druckregelung an Gasmotoren Intelligent, miniaturized and longlife cylinder pressure sensors with

More information

Vibration Measurement and Noise Control in Planetary Gear Train

Vibration Measurement and Noise Control in Planetary Gear Train Vibration Measurement and Noise Control in Planetary Gear Train A.R.Mokate 1, R.R.Navthar 2 P.G. Student, Department of Mechanical Engineering, PDVVP COE, A. Nagar, Maharashtra, India 1 Assistance Professor,

More information

Planning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters

Planning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters Getriebebau NORD GmbH & Co. KG Getriebebau-Nord-Straße 1 22941 Bargteheide, Germany www.nord.com Planning and Commissioning Guideline for NORD IE4 Synchronous Motors with NORD Frequency Inverters General

More information

Accessories smart additions for efficiency and intelligent performance

Accessories smart additions for efficiency and intelligent performance smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.

More information

Technical Article. How to implement a low-cost, accurate state-of-charge gauge for an electric scooter. Manfred Brandl

Technical Article. How to implement a low-cost, accurate state-of-charge gauge for an electric scooter. Manfred Brandl Technical How to implement a low-cost, accurate state-of-charge gauge for an electric scooter Manfred Brandl How to implement a low-cost, accurate state-of-charge gauge for an electric scooter Manfred

More information

MANTECH ELECTRONICS. Stepper Motors. Basics on Stepper Motors I. STEPPER MOTOR SYSTEMS OVERVIEW 2. STEPPING MOTORS

MANTECH ELECTRONICS. Stepper Motors. Basics on Stepper Motors I. STEPPER MOTOR SYSTEMS OVERVIEW 2. STEPPING MOTORS MANTECH ELECTRONICS Stepper Motors Basics on Stepper Motors I. STEPPER MOTOR SYSTEMS OVERVIEW 2. STEPPING MOTORS TYPES OF STEPPING MOTORS 1. VARIABLE RELUCTANCE 2. PERMANENT MAGNET 3. HYBRID MOTOR WINDINGS

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS WARNING: WARNING: www.altronicinc.com DEVIATION DEVIATION FROM THESE FROM INSTRUCTIONS THESE INSTRUCTIONS MAY LEAD MAY TO LEAD IMPROPER TO IMPROPER OP- ERATION OF ENGINE THE MACHINE

More information

Reliable and Application specific. Slewing Drives for Wind Turbines

Reliable and Application specific. Slewing Drives for Wind Turbines Reliable and Application specific 2 Powerful and versatile Yaw and pitch gearboxes based on proven technology: For almost 20 years Liebherr has been supplying highly reliable components to the wind industry.

More information

Storvik HAL Compactor

Storvik HAL Compactor Storvik HAL Compactor Gunnar T. Gravem 1, Amund Bjerkholt 2, Dag Herman Andersen 3 1. Position, Senior Vice President, Storvik AS, Sunndalsoera, Norway 2. Position, Managing Director, Heggset Engineering

More information

SCD SCHOTTEL COMBI DRIVE

SCD SCHOTTEL COMBI DRIVE YOUR PROPULSION EXPERTS SCHOTTEL COMBI DRIVE THE ELECTRIC THRUSTER SCD SCHOTTEL COMBI DRIVE The economical propulsion solution. 2 3 SCD COMBI DRIVE ELECTRIC AZIMUTH THRUSTERS In combination with a power

More information

Installation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5

Installation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:

More information

CHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL

CHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL STANDARDS October 2017 CHECK AND CALIBRATION PROCEDURES FOR FATIGUE TEST BENCHES OF WHEEL E S 3.29 Page 1/13 PROCÉDURES DE CONTRÔLE ET CALIBRAGE DE FATIGUE BANCS D'ESSAIS DE ROUE PRÜFUNG UND KALIBRIERUNG

More information

Hybrid Architectures for Automated Transmission Systems

Hybrid Architectures for Automated Transmission Systems 1 / 5 Hybrid Architectures for Automated Transmission Systems - add-on and integrated solutions - Dierk REITZ, Uwe WAGNER, Reinhard BERGER LuK GmbH & Co. ohg Bussmatten 2, 77815 Bühl, Germany (E-Mail:

More information

Fuel Consumption Measurement

Fuel Consumption Measurement Fuel Consumption Measurement 135 Introduction The Due use to the of a increasing T-Sense awareness torque measuring of the impact system of means exhaust efficiency emissions improvement, overload on the

More information

Delomatic 400 (DM 400) based Gas Engine and Combined Heat and Power (CHP) Control and Management System

Delomatic 400 (DM 400) based Gas Engine and Combined Heat and Power (CHP) Control and Management System Table of contents 1. WARNINGS AND LEGAL INFORMATION... 3 3.5 LEGAL INFORMATION AND RESPONSIBILITY... 3 3.6 ELECTROSTATIC DISCHARGE AWARENESS... 3 3.7 SAFETY ISSUES... DELOMATIC 400 GAS 3 3.8 DISCLAIMER...

More information

For advanced drive technology DATAFLEX. Torque measuring shaft DATAFLEX

For advanced drive technology DATAFLEX. Torque measuring shaft DATAFLEX DATAFLEX Torque measuring shaft DATAFLEX 263 The principle: Torque measurement at low cost DATAFLEX measures torques without contact or radio frequency, is maintenance-free and has a high frequency of

More information

Dusty / Dusty Ex. Low-Cost Broken Bag Detection. Operating Instructions. SWR engineering Messtechnik GmbH

Dusty / Dusty Ex. Low-Cost Broken Bag Detection. Operating Instructions. SWR engineering Messtechnik GmbH EN Dusty / Dusty Ex Operating Instructions Low-Cost Broken Bag Detection SWR engineering Messtechnik GmbH CONTENTS Page 1. Introduction.............................................................. 3 1.1

More information

CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES

CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES New Backward-Compatible Enhanced CPU-95 Display Now Available CPU-95 ADVANCED DIGITAL IGNITION SYSTEM FOR INDUSTRIAL ENGINES Microprocessor-based, crankshaft referenced digital ignition system for medium-sized

More information

GFS - New Charging Technology

GFS - New Charging Technology GFS - New Charging Technology The new GFS-Chargers feature the highest flexibility and the simplest usability. They set new standards regarding the quantity and extent of retrievable data. Pulse-chargers

More information

INTELLIGENT FLANGE STRÖTER. Magnetic pulse generator

INTELLIGENT FLANGE STRÖTER. Magnetic pulse generator INTELLIGENT FLANGE STRÖTER agnetic pulse generator Incremental magnetic pulse generator addons to drive systems is now possible in an easy and economical way both in new and existing installations. The

More information

WINDROCK 6400 PORTABLE ANALYZER Premium Portable Monitoring for Reciprocating Machinery

WINDROCK 6400 PORTABLE ANALYZER Premium Portable Monitoring for Reciprocating Machinery WINDROCK 6400 PORTABLE ANALYZER Premium Portable Monitoring for Reciprocating Machinery Machine Protection Condition Monitoring Performance Analysis Economic Evaluation WINDROCK 6400: BENEFITS OF MACHINERY

More information

SINAMICS GM150 IGCT version

SINAMICS GM150 IGCT version /2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions

More information

KISSsoft 03/2017 Tutorial 15

KISSsoft 03/2017 Tutorial 15 KISSsoft 03/2017 Tutorial 15 Bevel gears KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag Contents 1 Starting KISSsoft...

More information

HYDRUS ULTRASONIC METER

HYDRUS ULTRASONIC METER HYDRUS APPLICATION Static ultrasonic water meter for accurate measuring and recording for all applications of water supply. FEATURES 4 Ultrasonic water meter with long-term stability under difficult conditions

More information

Diesel-Electric Propulsion Systems Power under Control

Diesel-Electric Propulsion Systems Power under Control Diesel-Electric Propulsion Systems Power under Control Diesel-Electric Propulsion Systems Advantages Low Noise and Vibration Electric propulsion drives are unsurpassed for their quietness of operation.

More information

1.2 For the purpose of this UR, the following definitions apply: Low-Speed Engines means diesel engines having a rated speed of less than 300 rpm.

1.2 For the purpose of this UR, the following definitions apply: Low-Speed Engines means diesel engines having a rated speed of less than 300 rpm. (Feb 2015) (Corr.1 June 2016) Type Testing of I.C. Engines 1. General 1.1 Type approval of I.C. engine types consists of drawing approval, specification approval, conformity of production, approval of

More information

CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES

CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES CPU-XL VariSpark ADVANCED DIGITAL IGNITION SYSTEM FOR LARGE GAS ENGINES n State-of-the-art, crankshaft-referenced digital ignition system for natural-gas fueled integral compressor engines n Innovative

More information

WINDROCK 6400 PORTABLE ANALYZER Premium Portable Monitoring for Reciprocating Machinery

WINDROCK 6400 PORTABLE ANALYZER Premium Portable Monitoring for Reciprocating Machinery WINDROCK 6400 PORTABLE ANALYZER Premium Portable Monitoring for Reciprocating Machinery Machine Protection Condition Monitoring Performance Analysis Economic Evaluation WINDROCK 6400: BENEFITS OF MACHINERY

More information

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview... SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...

More information

TORQUE TRANSDUCER TMHFB-*NM (for Torque Transducer) Instruction Manual. MinebeaMitsumi Inc. Sensing Device Business Unit

TORQUE TRANSDUCER TMHFB-*NM (for Torque Transducer) Instruction Manual. MinebeaMitsumi Inc. Sensing Device Business Unit TORQUE TRANSDUCER TMHFB-*NM (for Torque Transducer) Instruction Manual MinebeaMitsumi Inc. Sensing Device Business Unit Please read this manual thoroughly before attempting to use the equipment. Be sure

More information

The right torque in the right place

The right torque in the right place Technical article for the trade press (Parts I, II and III) October 2017 Power transmission / conveying engineering / design engineering / machine elements / system and work safety The right torque in

More information

New method for the protection of gas turbines against overload and overspeed

New method for the protection of gas turbines against overload and overspeed New method for the protection of gas turbines against overload and overspeed Protection of gas turbines against overload and overspeed 1. Summary Gasturbine generator sets, in particular with aeroderivative

More information

Differential pressure gauge with output signal With integrated working pressure indication (DELTA-trans) Model DPGT40

Differential pressure gauge with output signal With integrated working pressure indication (DELTA-trans) Model DPGT40 Mechatronic pressure measurement Differential pressure gauge with output signal With integrated working pressure indication (DELTA-trans) Model DPGT40 WIKA data sheet PV 17.19 Applications weitere Zulassungen

More information

Slippage Detection and Traction Control System

Slippage Detection and Traction Control System Slippage Detection and Traction Control System May 10, 2004 Sponsors Dr. Edwin Odom U of I Mechanical Engineering Department Advisors Dr. Jim Frenzel Dr. Richard Wall Team Members Nick Carter Kellee Korpi

More information

flowtronic Sensor Series S8005 flowtronic Sensor Series S8005 Product Information Version GREGORY Technology GmbH

flowtronic Sensor Series S8005 flowtronic Sensor Series S8005 Product Information Version GREGORY Technology GmbH Product Information Version 11.04.2016 GREGORY Technology GmbH www.flowtronic.de Introduction The flowtronic sensors are developed for fuel consumption measurement of internal combustion engines. Today

More information

SCD SCHOTTEL COMBI DRIVE

SCD SCHOTTEL COMBI DRIVE YOUR PROPULSION EXPERTS SCHOTTEL COMBI DRIVE THE ELECTRIC THRUSTER SCD SCHOTTEL COMBI DRIVE The economical propulsion solution. 2 3 SCD COMBI DRIVE ELECTRIC AZIMUTH THRUSTERS In combination with a power

More information

FEASIBILITY STYDY OF CHAIN DRIVE IN WATER HYDRAULIC ROTARY JOINT

FEASIBILITY STYDY OF CHAIN DRIVE IN WATER HYDRAULIC ROTARY JOINT FEASIBILITY STYDY OF CHAIN DRIVE IN WATER HYDRAULIC ROTARY JOINT Antti MAKELA, Jouni MATTILA, Mikko SIUKO, Matti VILENIUS Institute of Hydraulics and Automation, Tampere University of Technology P.O.Box

More information

Application of Steering Robot in the Test of Vehicle Dynamic Characteristics

Application of Steering Robot in the Test of Vehicle Dynamic Characteristics 3rd International Conference on Mechatronics, Robotics and Automation (ICMRA 2) Application of Steering Robot in the Test of Vehicle Dynamic Characteristics Runqing Guo,a *, Zhaojuan Jiang 2,b and Lin

More information

Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning.

Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning. Introduction OPERATING INSTRUCTIONS: MCD REMOTE OPERATOR Order Codes: 175G94 (for MCD 2) 175G361 + 175G9 (for MCD 5) 175G361 (for MCD 3) 1. Introduction 1.1. Important User Information Observe all necessary

More information

D. Operation and Maintenance Data. In addition to items specified in Division 1 Section "Operation and Maintenance Data," include the following:

D. Operation and Maintenance Data. In addition to items specified in Division 1 Section Operation and Maintenance Data, include the following: SECTION 16211 - ELECTRICITY METERING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

5 Project Planning for Gear Units

5 Project Planning for Gear Units Efficiency of SEW gear units Project Planning for Gear Units.1 Efficiency of SEW gear units General information The efficiency of gear units is mainly determined by the gearing and bearing friction. Keep

More information

W SERIES IMPULSE VOLTAGE TEST SYSTEM APPLICATION FEATURES

W SERIES IMPULSE VOLTAGE TEST SYSTEM APPLICATION FEATURES W SERIES IMPULSE VOLTAGE TEST SYSTEM Impulse Voltage Test System is used to generate impulse voltages from 100 KV to 2400 KV simulating lightning strokes and switching surges with energies up to 240 KJ.

More information

Series 7000 Torque Sensor for PTO-shafts

Series 7000 Torque Sensor for PTO-shafts Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional

More information

St epping Mot or s C-i ORIENTAL MOTOR GENERAL CATALOG 2009/2010

St epping Mot or s C-i ORIENTAL MOTOR GENERAL CATALOG 2009/2010 C-i ORIENTAL MOTOR GENERAL CATALOG 29/21 C Introduction C-2 Stepping Motor and Driver Packages AC Input Stepping Motor and Driver Packages DC Input Stepping Motors AC Input AS Series C-14 DC Input ASC

More information

AUTOMATED TORSION BENCH DRIVETWIST

AUTOMATED TORSION BENCH DRIVETWIST Force and torque measurement systems AUTOMATED TORSION BENCH DRIVETWIST ANDILOG Technologies info@andilog.com Phone : +33 (0) 820 888 202 Fax : +33 (0) 820 888 902 Automated torsion bench DRIVETWIST Automated

More information

SINAMICS SM150. 4/2 Overview. 4/2 Benefits. 4/2 Design. 4/6 Function. 4/8 Selection and ordering data. 4/8 Options

SINAMICS SM150. 4/2 Overview. 4/2 Benefits. 4/2 Design. 4/6 Function. 4/8 Selection and ordering data. 4/8 Options /2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /1 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions

More information

General Purpose Ignition System GS6. User Manual. Document No PS-0009

General Purpose Ignition System GS6. User Manual. Document No PS-0009 General Purpose Ignition System GS6 User Manual Document No. 1521-PS-0009 Gill Instruments Ltd Saltmarsh Park, 67 Gosport Street, Lymington, Hampshire, SO41 9EG, UK Tel: +44 1590 613500 Fax: +44 1590 613555

More information

AVL FUEL BALANCE & FUEL TEMPERATURE CONTROL

AVL FUEL BALANCE & FUEL TEMPERATURE CONTROL CONSUMPTION MEASUREMENT AVL FUEL BALANCE & FUEL TEMPERATURE CONTROL Description The combination of AVL Fuel Balance and AVL Fuel Temperature Control is a high precise fuel consumption measurement and conditioning

More information

Standard with cone bushing. Backlash-free Safety Clutch

Standard with cone bushing. Backlash-free Safety Clutch EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC

More information

Tips & Technology For Bosch business partners

Tips & Technology For Bosch business partners Tips & Technology For Bosch business partners Current topics for successful workshops No. 05 Trucks Starters and starter systems Part 2 Moderately heavy commercial vehicles with diesel engines having a

More information

Pressure Boosting Systems Multiple-Pump Units

Pressure Boosting Systems Multiple-Pump Units Multiple-Pump Units Programm Overview, Multiple-Pump Units Multiple-pump units (non-self-priming) Programm Overview, Multiple-Pump Units Wilo-Comfort-N-Vario COR MVISE / VR Duty chart 16m 56 m /h Factory-assembled

More information

Independent Trolling Solution

Independent Trolling Solution Independent Trolling Solution Independent Trolling Solution Precise and safe manoeuvring The Prop.act is a self-sufficient, ready-to-install clutch unit that makes it possible to steplessly vary the propeller

More information

SHARKY 775 COMPACT ENERGY METER ULTRASONIC

SHARKY 775 COMPACT ENERGY METER ULTRASONIC APPLICATION The ultrasonic compact energy meter can be used for measuring the energy consumption in heating / cooling application for billing purposes. FEATURES 4 Approval for ultrasonic meter with dynamic

More information

DSL-240 MkIII Single Pass Dust Monitor Measures mg/m 3 using DDP

DSL-240 MkIII Single Pass Dust Monitor Measures mg/m 3 using DDP Ideal for monitoring dust levels in the exhaust gas of industrial combustion or air filtration processes. Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions

More information

Intelligent Lift Control Valve with Electronic Card

Intelligent Lift Control Valve with Electronic Card Intelligent Lift Control Valve with Electronic Card Q max = 500 l/min, p max = 80 bar Leak-free, two-stage, electronically controlled, without frequency control i50 and i500 Information lift-control valve

More information

Measurement Types in Machinery Monitoring

Measurement Types in Machinery Monitoring Machinery Health Sensors Measurement Types in Machinery Monitoring Online machinery monitoring for rotating equipment is typically divided into two categories: 1. Protection Monitoring 2. Prediction Monitoring

More information

Stepper Motors ver ver.5

Stepper Motors ver ver.5 A Stepper s Stepper s A-1 Overview... A-2 Overview and... A-15 & Stepper and RK Series A-16 RK... A-47... A-51 Stepper Series A-52 Stepper Series A-8 See Full Product Details Online www.orientalmotor.com

More information

Series 7000 Torque Sensor for PTO-shafts

Series 7000 Torque Sensor for PTO-shafts Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional

More information

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX

DATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free

More information

Timing is everything with internal combustion engines By: Bernie Thompson

Timing is everything with internal combustion engines By: Bernie Thompson Timing is everything with internal combustion engines By: Bernie Thompson As one goes through life, it is said that timing is everything. In the case of the internal combustion engine, this could not be

More information

Example of Combining Different Types of Heater Control. Heater control. Temperature Controller

Example of Combining Different Types of Heater Control. Heater control. Temperature Controller Technical Guide for Power s CSM_Power_s_TG_E_5_1 Overview of Power s Example of Combining Different Types of Heater Control Heater control Manual G32X-V2K E5@ series Current output Current output Voltage

More information

Continuous Duty Torque Measurement. Directly and accurately measures the power of turbomachinery in the Oil, Gas and Petrochemical industries.

Continuous Duty Torque Measurement. Directly and accurately measures the power of turbomachinery in the Oil, Gas and Petrochemical industries. Continuous Duty Torquetronic TM Continuous Duty Torque Measurement. Directly and accurately measures the power of turbomachinery in the Oil, Gas and Petrochemical industries. Measuring steady state torque

More information

Based on the findings, a preventive maintenance strategy can be prepared for the equipment in order to increase reliability and reduce costs.

Based on the findings, a preventive maintenance strategy can be prepared for the equipment in order to increase reliability and reduce costs. What is ABB MACHsense-R? ABB MACHsense-R is a service for monitoring the condition of motors and generators which is provided by ABB Local Service Centers. It is a remote monitoring service using sensors

More information

SKF Disc Couplings. Selection

SKF Disc Couplings. Selection SK Disc Couplings The SK disc coupling is the ideal solution in medium to high applications that require torsional rigidity, offer some allowance for misalignment, and do not require lubrication. These

More information

Installation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0

Installation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:

More information

T-Sense _ 660. Optical Torque Measuring Systems. Product Bulletin

T-Sense _ 660. Optical Torque Measuring Systems. Product Bulletin T-Sense Optical Torque Measuring Systems _ 660 Product Bulletin WWW.VAF.NL 1 Introduction The use of a T-Sense torque measuring system means efficiency improvement, overload protection and prevention of

More information

Safety Sensor CSS 180 Product Information

Safety Sensor CSS 180 Product Information Safety Sensor CSS 180 Product Information Safety Sensor CSS 180 CSS180CSS 180 PDF-M / EN 60947-5-3 EN 954-1 Control Category 4 IEC 61508, suitable for use in SIL 3 applications BG Type-Certification in

More information

Improvement of Vehicle Dynamics by Right-and-Left Torque Vectoring System in Various Drivetrains x

Improvement of Vehicle Dynamics by Right-and-Left Torque Vectoring System in Various Drivetrains x Improvement of Vehicle Dynamics by Right-and-Left Torque Vectoring System in Various Drivetrains x Kaoru SAWASE* Yuichi USHIRODA* Abstract This paper describes the verification by calculation of vehicle

More information

ST Wiring diagram. Product description. Temperature controller. Order number

ST Wiring diagram. Product description. Temperature controller. Order number ST7-31.3 Temperature controller Order number 9154.12 Wiring diagram Product description The switching exits of the thermostatic controller can be programmed as -two-point controller with alarm -three-point

More information

Introduction. 1/2 Overview 1/3 Benefits 1/3 Application. 1/3 Order No. code. 1/4 Protection strategy

Introduction. 1/2 Overview 1/3 Benefits 1/3 Application. 1/3 Order No. code. 1/4 Protection strategy /2 Overview /3 Benefits /3 Application /3 Order No. code /4 Protection strategy /5 General technical data /5 Converter-fed operation /7 Motor protection /7 Bearing monitoring /8 Electrical design /8 Motor

More information

Sentinel. Panametrics Custody Transfer Gas Ultrasonic Flowmeter. GE Sensing. Applications. Features

Sentinel. Panametrics Custody Transfer Gas Ultrasonic Flowmeter. GE Sensing. Applications. Features Applications The Sentinel flowmeter is a complete ultrasonic flowmeter system for the measurement of natural gas flow applications such as: Custody transfer Transmission and distribution Underground storage

More information

Unit Protection System for Pumped-Storage Power Stations

Unit Protection System for Pumped-Storage Power Stations Unit Protection System for Pumped-Storage Power Stations 1. Introduction In many power systems, pumped-storage power stations are used in addition to run-of-river power stations. These power stations serve

More information

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48 Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents

More information

ecotrans Lf 01/02 Microprocessor Transmitter / Switching Device for Conductivity

ecotrans Lf 01/02 Microprocessor Transmitter / Switching Device for Conductivity Data Sheet 20.27 Page / ecotrans Lf 0/02 Microprocessor Transmitter / Switching Device for Conductivity Type 2027 Housing for DIN rail mounting (5 x 7.5 mm to EN 0 75 A.) Brief description The JUMO ecotrans

More information