Replacement Parts Diagrams 300 Series Hole Digger

Size: px

Start display at page:

Download "Replacement Parts Diagrams 300 Series Hole Digger"

Victor King
6 years ago
Views:

1 Replacement Parts Diagrams 00 Series Hole Digger 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

2 Aluminum Body Series Magura Throttle Control Assembly 00 Series Hole Diggers Plastic Body Series Magura Throttle Control Assembly 00 Series Hole Diggers 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

3 Aluminum Body Series Magura Throttle Control Assembly 00 Series Hole Diggers Reference Number DESCRIPTION QUANTITY A A Body & Clamp, Throttle (Includeds P/N , Qty ) Tube, Throttle (Includes P/N ) Grip, Handle Disc, Cover Cover, Aluminum Bolt, Axle Sheave, Roller Boot, Rubber Screw, Pan Head, M5 x Nut, Hexagon Washer, Insert Washer Screw Plastic Body Series Magura Throttle Control Assembly 00 Series Hole Diggers Reference Number DESCRIPTION QUANTITY A A Body Assembly, (Includes P/N , Qty ) Tube, Throttle (Includes P/N ) Grip, Handle Screw, Pan Head, M5 x 0 Screw, Self Tapping Cover, Top Sheave, Roller Boot, Rubber 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 5

4 Operator Handle Assemblies 00 Series Hole Diggers Throttle Control handle One Assembly Per Machine Operator handle Three Assemblies Per Machine 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

5 Handle Assemblies 00 Series Hole Diggers Reference Number DESCRIPTION QUANTITY A A WS CC- 0H-500 Handle, Throttle (Includes P/N 0-00) Handle, Operator (Includes P/N 0-00 & P/N ) Throttle, Twist Control, Plastic, Complete Grip, Handle Cable, Throttle Tube, Handle Brace Tube, Handle Brace (Throttle) Screw, Cap, 5/ x -/ UNC, Grade 5, Plated Washer, Flat, /, Plated Washer, Lock, 5/, Plated Nut, Hex, 5/ UNC, Plated Assembly, Swivel Assembly, Sivel (GXV0 Honda Engine Only) Clip, Throttle Decal, Ignition (Used On Four Cycle Engines Only) 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

6 Engine And Cover Assembly 0F, F, & 5F Hole Diggers Equipped With Subaru EC0 Series Engine 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

7 Engine And Cover Assembly 0F, F, & 5F Hole Diggers Equipped With Subaru EC0 Series Engine Reference Number DESCRIPTION QUANTITY EC0-YV A FES AN COV-0 AN-90-5L SG H Engine, Subaru ( HP) Cover, Transmission (Includes P/N FES 50-7) Rotor And Shoe Assembly, Clutch Drum And Pinion Assemby, Clutch Bushing, Oilite Washer, Fiber Washer, Flat, 7/, Plain Finish Nut, Jam Lock, 7/ UNF Key, Woodruff, / x 5/, Alloy Screw, Socket, 5/ x / UNC, Plated Valve, Pressure Release Clamp, Plated Washer, AN Type, 5/, Plated Washer, Lock, 5/, Plated Nut, Hex, 5/, Plated Decal, (Model 0F Only) Decal, (Modle F Only) Decal, (Model 5F Only) Decal, Danger Decal Assistance Decal, Wrning Decal, Chock Decal, Warning 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 9

8 Transmission Assembly 0F, F, 5F Hole Diggers Equipped With Subaru EC0 Series Engine 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 70

9 Transmission Assembly 0F, F, 5F Hole Diggers Equipped With Subaru EC0 Series Engine Reference Number DESCRIPTION QUANTITY A FES /0B-AV F A AN-90-5L AP--S 0 Case, Transmission (Includes P/N A-007- and 0) Gasket, Transmission Pin, Dowel / x Gear, Primary key, Woodruff, 5/ x 5/, Alloy Pinion Bushing, Oilite Nut, Hex, 5/ UNF, Self-Locking Washer, Flat, 5/, Plain Finish Gear, Secondary Ring, Nilos Cone, Bearing Cup, Bearing Screw, Cap, 5/ x / UNC, Plated Plug, Oil Level (Includes P/N 0) Seal, Oil Bushing Key, Woodruff, / x, Alloy Pin, Auger, General and Stihl (Includes P/N AP--S) Shaft, Drive, 7/ Square, Ground Hog Type Drive, (P/N Not Required) Shaft, Drive, Stihl Type Drive (P/N Not Required) Shaft, Drive, / Hexagon, Sided, (Includes P/N ) Washer, AN Type, 5/, Plated Washer, Lock, 5/, Plated Nut, Hex, 5/ UNC, Plated Plug, Oil Drain (Includes P/N 0) Gasket, Oil Plug Pin, Safety Pin, Auger, Ground Hog (Includes P/N AP--S) SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

10 Engine And Cover Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Serial Ending with 0] 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

11 Engine And Cover Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Serial Ending with 0] Reference Number DESCRIPTION QUANTITY GXV0NGE 0-0-A 0H-070 FES AN-90-5L H-0050 COV SG H H WS H-090 0H-500 Engine, Honda (5 HP) Cover, Transmission (Includes P/N FES 50-7) Rotor And Shoe Assembly, Clutch Bushing, Oilite Screw, Set, Cup, /- x / Key, Woodruff, 5/ x 5/, Alloy Screw, Scoket, 5/ x / UNF, Plateed Plug, Pipe, /-7 PTF Washer, AN Type, 5/, Plated Washer, Lock, 5/, Plated Valve, Pressure Release O Ring Clamp, Plated Decal, Danger Decal,Assistance Decal, (Model 0 Only) Decal, (Model Only) Decal, (Model 57 Only) Decal, warning Decal, Choke Spring, Governor Decal, Warning Assembly, Swivel Screw, Cap, Flange, M x 0mm Guard, Governor Spring Decal, Ignition 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

12 Engine And Cover Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Used Starting With Serial Number 09] 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

13 Engine And Cover Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Used Starting With Serial Number 09] Reference Number DESCRIPTION QUANTITY GXV A 0H RS AN-90-5L COV-0 0H H-500 0H-500 SG H-00 0H H-000 Engine, Honda (5.5 HP) Cover, Transmission (Includes P/N 0-RS-) Rotor And Shoe Assembly, Clutch Bearing, Ball Screw, Set, Cup, /- x / Key, Woodruff, 5/ x 5/, Alloy Bolt, Shoulder, (/ x / x 5/- UNF) Plug, Pipe, /-7 PTF Screw, Cap, 5/- UNC x -/, Plated Washer, AN Type, 5/, Plated Washer, Lock, 5/, Plated Nut, Hexagon, 5/, Plated Clamp, Plated O Ring Valve, Pressure Release Swivel Assembly Decal, Danger Decal, Warning Decal, Choke Decal, Ignition Decal, Assistance Decal, Danger Decal, (Model 0 Only) Decal, (Model Only) Decal, (Model 57 Only) Muffler (Modified) Guard, Muffler (Modified) Screw, Panhead, Philips, 5/- UNC x /, Plated Washer, Plastic 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 75

14 Carburetor Assembly 0H, H, & 57H Hole Diggers Equipped With Honda GXV0 Engine This drawing represents various revisions of the BE5A carburator in use as of this printing. Unless otherwise specified all parts are interchangeable. 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

15 Carburetor Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine Reference Number DESCRIPTION QUANTITY ZG ZE ZE ZG ZH7-W0 0-ZE ZE ZG ZG9-0 -ZE ZG9-0 -ZG ZG9-T00 0-ZE-00 -ZG9-T00 95-ZE- 95-ZE- 95-ZE- 957-ZE G 990-ZH ZH ZH ZE ZG ZG9-00 -ZG9-U0 795-ZG9-U H-000 Gasket Set Valve Set, Float Float, Set Chamber Set, Float Screw Set Screw Set B Choke Set Carburetor Assembly (BE5A B) Carburetor Assembly (BE5A C) Screw, Throttle Stop Nozzle, Main Insulator, Carburetor Gasket, Carbuetor (HPE) Spacer Comp., Carburetor Gasket, Carburetor Lever, Valve Plate, Lever Setting Spring, Petcock Lever Gasket Petcock Screw, Pan Head ( x ) Jet, Main (#5) Jet, Main (#55) Jet, Main (#5) Jet Set, Main (#) O -Ring (. x.5) Elbow Comp., Air Cleaner Rod, Choke Control Bracket, Choke Lever Bolt, Flange ( x 00) Choke Conversion Kit GXV0 (Includes P/Nʼs -ZG9-U0 & 795-ZG9-U0) OPTIONAL OPTIONAL 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 77

16 Transmission Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Serial Number Ending with 0] 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

17 Transmission Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Serial Number Ending with 0] Reference Number DESCRIPTION QUANTITY A AN-90-5L FES /0B-AV AP--S H-00-A H-00 57H Case, Transmission (Includes P/N A-007- and 0) Gasket, Transmission Pin, Dowel, / x Drum And Pinion Assembly, Clutch Washer, Fiber Nut, Hex, 5/ UNC, Plated Washer, Lock, 5/, Plated Washer, AN Type, 5/, Plated Gear, Primary Key, Woodruff, 5/ x 5/, Alloy Nut, Hex, - UNF, Self-Locking Washer, Flat,, Plain Finsh Pinion Gear, Secondary Bushing, Oilite Ring, Nilos Cone, Bearing Cup, Bearing Pin, Auger, General and Stihl (Includes P/N AP--S) Seal, Oil Screw, Cap, 5/ x / UNC, Grade 5, Plated Key, Woodruff, / x, Alloy Pin, Safety Bushing Shaft, Drive, / Hexagon, Side (Includes P/N ) Shaft, Drive, 7/ Square, Ground Hog Type Drive (P/N Not Required) Shaft, Drive, Stihl Type Drive (P/N Not Required) Plug, Oil Drain (Includes P/N 0) Plug, Oil Level (Includes P/N 0) Gasket, Oil Plug Pin, Auger, Gound Hog (Includes P/N AP--S SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 79

18 Transmission Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Starting With Serial Number 09] 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 0

19 Transmission Assembly 0H, H, & 57H Hole Diggers Equipped with Honda GXV0 Engine [Starting With Serial Number 09] Reference Number DESCRIPTION QUANTITY A AN-90-5L RS- 05/0B-AV AP--S H-00-A H-00 57H H-000 Case, Transmission (Includes P/N 0-RS- and 0) Gasket, Transmission Pin, Dowel, / x Drum And Pinion Assembly, Clutch Washer, Fiber Nut, Hex, 5/ UNC, Plated Washer, Lock, 5/, Plated Washer, AN Type, 5/, Plated Gear, Primary Key, Woodruff, 5/ x 5/, Alloy Nut, Hex, - UNF, Self-Locking Washer, Flat,, Plain Finsh Pinion Gear, Secondary Bearing, Ball Ring, Nilos Cone, Bearing Cup, Bearing Pin, Auger, General and Stihl (Includes P/N AP--S) Seal, Oil Screw, Cap, 5/ x / UNC, Grade 5, Plated Key, Woodruff, / x, Alloy Pin, Safety Bushing Shaft, Drive, / Hexagon, Side (Includes P/N ) Shaft, Drive, 7/ Square, Ground Hog Type Drive (P/N Not Required) Shaft, Drive, Stihl Type Drive (P/N Not Required) Plug, Oil Drain (Includes P/N 0) Plug, Oil Level (Includes P/N 0) Gasket, Oil Plug Pin, Auger, Gound Hog (Includes P/N AP--S Screw, Panhead, Philips, 5/- UNC x /, Plated Washer, Plastic SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

20 Engine And Cover Assembly 0T, T, & 57T Hole Diggers Equipped with Tecumseh VLV0 Engine 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

21 Engine And Cover Assembly 0T, T, & 57T Hole Diggers Equipped with Tecumseh VLV0 Engine Reference Number DESCRIPTION QUANTITY VLV0-5005C 0-05-A 57 5 FES T-0050 COV-0 AN-90-5L T SG WS-77 0H-500 Engine, Tecumseh Vector ( HP) Cover, Transmission (Includes P/N FES 50-7) Rotor And Shoe Assembly, Clutch Drum And Pinion Assembly, Clutch Bushing, Oilite Washer, Fiber Washer, Flat, /, Plain Finish Screw, Cap, /- x / UNF Key, Woodruff, 5/ x 5/, Alloy Screw, Scoket, 5/ x UNC, Plated Valve, Pressure Release O Ring Clamp, Plated Washer, AN Type, 5/, Plated Washer, Lock, 5/, Plated Nut, Hex, 5/, Plated Spring, Throttle Return Decal, (Model 0 Only) Decal, (Model Only) Decal, (Model 57 Only) Decal, Danger Decal, Assistance Decal, Warning Decal, Warning Assembly, Swivel Decal, Ignition 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

22 Transmission Assembly 0T, T, & 57T Hole Diggers Equipped with Tecumseh VLV0 Engine 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

23 Transmission Assembly 0T, T, & 57T Hole Diggers Equipped with Tecumseh VLV0 Engine Reference Number DESCRIPTION QUANTITY A FES /0B-AV A 5-0 5F-00 AN-90-5L AP--S 0 Case, Transmission (Includes P/N A-007- and 0) Gasket, Transmission Pin, Dowe / x Gear, Primary Key, Woodruff, 5/ x 5/, Alloy Pinion Bushing, Oilite Nut, Hex, 5/ UNF, Self-Locking Washer, Flat, 5/, Plain Finish Gear, Secondary Ring, Nilos Cone, Bearing Cup, Bearing Screw, Cap, 5/ x / UNC, Grade 5, Plated Plug, Oil Level (Includeds P/N 0) Seal, Oil Bushing Key, Woodruff, / x Alloy Pin, Auger, General and Stihl (Includes P/N AP--S) Shaft, Drive, / Hexagon, Sided (Includes P/N ) Shaft, Drive, 7/ Square, Ground Hog Type Drive (P/N Not Required) Shaft, Drive, Stihl Type Drive (P/N Not Required) Washer, AN Type, 5/, Plated Washer, Lock, 5/, Plated Nut, Hex, 5/ UNC, Plated Plug, Oil Drain (Includes P/N 0) Gasket, Oil Plug Pin, Safety Pin, Auger, Ground Hog (Includes P/N AP--S SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 5

24 Replacement Parts Diagrams 00 Series Earth -/ Hexagon Drive Connection For Use With 0/0 Series Hole Diggers 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

25 Replacement Parts Diagrams 00 Series Earth -/ Hexagon Drive Connection For Use With 0/0 Series Hole Digger Reference Number DESCRIPTION APPLICATION QUANTITY DP- DP- AP--S SB5 SB5 SB5 RL Screw, Cap, 5/ x / UNC, Plated Nut, Hex, 5/ UNC, Plated Decal, Danger Pin, Drive Pin, Drive Pin, Auger (Includes P/N AP--S) Pin, Safety Pin, Roll, 5/ x -/, Plain Finish Pin, Roll, 5/ x, Plain Finish Bit, Screw Bit, Screw Bit, Screw Lock, Rubber All All All 00-E Auger 5500-X Extension 00-E Auger 0-E Auger 5500-X Extension 550-X Extesnion 00-E thru 00-P X Extension 5500-E thru 5500-E Extensions 00-E thru 00-P X Extension 5500-E thru 5500-E Extensions 00-E thru 00-P 5500-X Extension 00-E thru 00-0E 5500-X thru X Extensions X Extension 00-E Auger 00-E and 0-E 00-E Auger 00-E thru 00-P 00-E thru 00-P As Req 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 7

26 Replacement Parts Diagrams 00 Series Earth -/ Hexagon Drive Connection For Use With 0/0 Serive Hole Diggers Reference Number DESCRIPTION APPLICATION QUANTITY 5 0S M 0CS CS CS CS Lug, Drive (Weld On) Lug, Drive (Weld On) Lug, Drive (Weld On) Shank, (Weld On) Shank, (Weld On) Shank, (Weld On) 00-E Auger 00-E Auger 00-E and 0-E 00-E thur 00-P 00-E Auger 00-E and 00-P 00-E Auger 00-0E and 00-E 00-E and 00-P 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE:

27 Left Blank Intentionally 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 9

28 Replacement Parts Diagrams PSD Series Earth 7/ Square (Ground Hog) Drive Connection For Use With / Series Hole Diggers 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 90

29 Replacement Parts Diagrams PSD Series Earth 7/ Square (Ground Hog) Drive Connection For Use With / Series Hole Diggers Reference Number DESCRIPTION APPLICATION QUANTIT Y AP--S SB5 SB5 RL M 0CS CS CS CS Screw, Cap, 5/ x / UNC, Plated Nut, Hex, 5/ UNC, Plated Decal, Danger Pin, Auger (Includes P/N AP--S) Pin, Safety Bit, Screw Bit, Screw Lock, Rubber Lug, Drive (Weld On) Lug, Drive (Weld On) Shank, (Weld On) Shank, (Weld On) Shank, (Weld On) All All All All PSD-5X Extension All PSD-5X Extension PSD Auger PSD thru PSD PSD thru PSD PSD Auger PSD thru PSD PSD Auger PSD Auger PSD0 and PSD As Reg 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 9

30 Replacement Parts Diagrams BT0 Series Earth Stihl Type Drive Connection For Use With 5/57 Series Hole Diggers 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 9

31 Replacement Parts Diagrams BT0 Series Earth Stihl Type Drive Connection For Use With 5/57 Series Hole Diggers Reference Number DESCRIPTION APPLICATION QTY AP--S SB5 SB5 RL M 0CS CS CS CS Screw, Cap, 5/ x / UNC, Plated Nut, Hex, 5/ UNC, Plated Decal, Danger Pin, Auger (Includes P/N AP--S) Pin, Safety Bit, Screw Bit, Screw Lok, Rubber Lug, Drive (Weld On) Lug, Drive (Weld On) Shank, (Weld On) Shank, (Weld On) Shank, (Weld On) All All All All BT0-5X Extension All BT0-5X Extension BT0-E Auger BT0-E thru BT0-P BT0-E thru BT0-P BT0-E Auger BT0-E thru BT0-P BT0-E And BT0-P BT0-E Auger BT0-0E and BT0-E BT0-P As Reg 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 9

32 Replacement Teeth Diagrams For Use With 00, PSD, And BT0 Series Earth REFERENCE DESCRIPTION QUANTITY 5 Dirt Tooth, Standard As Required 5HFC Dirt Tooth, Hard Faced As Required 5T0 Tooth, Chisel As Required 5T0C Tooth, Chisel, Hard Faced As Required 5 Tooth, Tugsten Carbide As Required Consult The Service Section Of This Manual For Specific Application Informaion 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 9

33 Display Stand Assembly 00 Series Hole Diggers 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 95

34 Display Stand Assembly 00 Series Hole Diggers Reference Number DESCRIPTION QUANTITY FP SG Leg, Stand (0 Hole Digger) Leg, Stand (00 Series Hole Diggers) Plate, Top (0 Hole Digger) Plate, Top (0, 0, & Hole Diggers) Plate, Top (5 & 57 Hole Diggers) Cap, Plug, Square Screw, Cap, /-0 UNC x -/, Plated Nut, Wing, /-0 UNC, Plated Decal, Warning Decal, Assistance Decal, General 00 SERIES HOLE DIGGER, FORM: GOM090, VERSION.0, AUTHORIZATION: DVR, PAGE: 9

660 Series DIG-R-MOBILE FORM GOM , VERSION Replacement Parts DIG-R-MOBILE (660)

660 Series DIG-R-MOBILE FORM GOM , VERSION Replacement Parts DIG-R-MOBILE (660) 0 Series DIG-R-MOBILE FORM GOM0990, VERSION. Replacement Parts DIG-R-MOBILE (0) 0 Series DIG-R-MOBILE FORM GOM0990, VERSION. Control Handle Assembly 0H And 0V DIG-R-MOBILE (Serial Numbers 0 Thru ) 0 Series