FIELD TRACKER for CASEIH Combines
|
|
- Lynette Waters
- 6 years ago
- Views:
Transcription
1 FIELD TRACKER for CASEIH Combines Product Description and Application
2
3 Field Tracker for CASEIH Combines Product Description and Application Summary Price List CASEIH Description List Note Page Part No. Part No. Price Field Tracker Packages C Field Tracker Pkg Series Combines $5, , A Field Tracker Pkg.-2144/66 and 2344/66 Combines $5, A Field Tracker Pkg.-2188, 2377, 2388, 2577, and 2588 Combines $5, Field Tracker Adapters C Feeder Adapter Kit-1640/60 and 1644/66 Combines $ A Hydraulic Update Kit-1600 Series Combines $ Field Tracker Conversion Package A Field Tracker Conversion Pkg.- $ , Series Combines Replacement F/T Assemblies A Field Tracker Frame Assembly- $2, , 2388, and 2588 Combines A Field Tracker Frame Assembly- $2, /66 and 2344/66 Combines Flex Header Kits C Flex Head Sensor Kit-Old style 1020 Headers $ A Flex Head Sensor Kit-1020 Flex Headers $ or Corn Header Kits A Corn Head Adapter Kit-1044 $ A Corn Head Adapter Kit-1064/1084 $ A Corn Head Adapter Kit-1063 $ A Corn Head Adapter Kit-1083 $ A Corn Head Sensor Kit with Height Control $ A Corn Head Sensor Kit - Header Height Control $ Sensor Kits (Miscellaneous) Sensor Replacement Kit-Corn Head $ Sensor Replacement Kit-Grain Head $ Sensor Replacement Kit-Self Center $
4 Product Description and Application Prices and Specifications are subject to change without notice. NOTE 1 Hydraulic Completing Package required for: 1640 combines s/n JJC and above 1660 combines s/n JJC and above 1680 combines s/n JJC and above All 1644, 1666, and 1688 combines Refer to pages 5 and 9 of this guide for more information. 2 Requires Feeder Package for combines 1640, 1644, 1660, and Refer to pages 5 and 8 of this guide for more information. 3 Requires Conversion Package for combines 2144 and Refer to pages 6 and 10 of this guide for more information. 4 Requires Conversion Package for combines Refer to pages 7 and 10 of this guide for more information. 5 For Headers with s/n below JJC Refer to page 13 of this guide for more information. 6 These are mechanical tilt kits - no sensors - dealer must get PTO separately. (BISH MFG. is the recommended source.) Refer to pages 15, 16, 17, and 18 of this guide for more information. 7 For Headers with s/n JJC and above. Refer to page 14 of this guide for more information has been changed to use in lieu of CASEIH C4/ Refer to page 19 of this guide for more information. 9 To replace Potentiometer CASEIH A1/271502, use Kit , , or , depending on where it is used. Refer to pages 21, 22, and 23 of this guide for more information. 4
5 C Field Tracker Package $5, Application: 1600 Series Combines. Hydraulic Update Kit required for 1640 Combines s/n JJC and above, 1660 Combines s/n JJC and above, 1680 Combines s/n JJC and above, and all 1644, 1666, and 1688 Combines. Feeder Adapter Kit required for 1640, 1644, 1660, and 1666 Combines. Note: Feeder House Opening: 45 A Field Tracker Assembly 1 B Jackshaft Bearing Bracket 1 C Jackshaft Bearing Bracket 1 D Control Module 1 E Hydraulic Valve 1 F Control Panel 1 G Threaded Rod 1 H Feeder Switch 1 I Valve Parts 1 J Angle 1 K Field Tracker Wire Harness 1 L Valve Cover Extension 1 M Console Support 1 N Hardware Bag 1 5
6 282718A Field Tracker Package $5, Application: 2144/66 and 2344/66 Combines series Combines also require FT Conversion Kit ( Part No ). Note: Feeder House Opening: 36 A Field Tracker Assembly 1 B Jackshaft Bearing Bracket 1 C Jackshaft Bearing Bracket 1 D Potentiometer Assembly 1 E Potentiometer Assembly 1 F Potentiometer Assembly 1 G Field Tracker Hose Harness 1 H Field Tracker Console Harness 1 I Field Tracker Cab Harness 1 J Field Tracker Front Harness 1 K Field Tracker Hose Support 1 L Header Control Switch 1 M Feeder Switch Assembly 1 N Electronic Hydraulic Control 1 O Field Tracker Valve Assembly 1 P Field Tracker Hardware Bag 1 Q Control Parts Bag 1 6
7 282723A Field Tracker Package $5, Application: 2188, 2377, 2388, 2577, and 2588 Combines series Combines also require FT Conversion Kit ( Part No ). Note: Feeder House Opening: 45 A Field Tracker Assembly 1 B Jackshaft Bearing Bracket 1 C Jackshaft Bearing Bracket 1 D Potentiometer Assembly 1 E Potentiometer Assembly 1 F Potentiometer Assembly 1 G Field Tracker Hose Harness 1 H Field Tracker Console Harness 1 I Field Tracker Cab Harness 1 J Field Tracker Front Harness 1 K Field Tracker Hose Support 1 L Header Control Switch 1 M Feeder Switch Assembly 1 N Electronic Hydraulic Control 1 O Field Tracker Valve Assembly 1 P Field Tracker Hardware Bag 1 Q Control Parts Bag 1 7
8 C Feeder Adapter Kit $ Application: 1640/60 and 1644/66 Combines. For use with Field Tracker Kit ( Part No ). A Left Hand Adapter 1 B Right Hand Adapter 1 C Plate, Block-off 2 D Hardware Package 1 8
9 106256A Hydraulic Update Kit $ Application: 1640 Combines s/n JJC and above, 1660 Combines s/n JJC and above, 1680 Combines s/n JJC and above, and all 1644, 1666, and 1688 Combines. A Hose 1 B Tee with O-ring 1 C Threaded Rod 3 D Flow Divider Dampening Disc 1 E Flow Control Valve 1 F Hydraulic Fitting Reducer 1 G Tube Nut 1 H O-ring, I O-ring, J Cap with O-ring 1 K Tie Straps 5 9
10 282727A Field Tracker Conversion Package $ Application: Converts 2300 Series FT to work on 2100 Series Combines. A FT Adapter Harness A1 1 B Extraction Tool-Size 16 1 C Electric Bulkhead Connector 1 D Electric Bulkhead Connector 1 E Front Harness Connector 1 F Packard Terminal G Packard Seal H Lock for Metripack I Sealing Plug (Deutsch ) 15 10
11 144254A Field Tracker Frame Assembly $2, Application: 2188, 2388, and 2588 Combines. Note: Feeder House Opening: 45 11
12 188075A Field Tracker Frame Assembly $2, Application: 2144/66 and 2344/66 Combines. Note: Feeder House Opening: 36 12
13 C Flex Head Sensor Kit $ Application: Old style 1020 Headers. (LH Drive) For headers with s/n before JJC A Header Wiring Harness 1 B LH Support Bracket 1 C RH Support Bracket 1 D Connecting Rod Assembly 2 E Sensor Assembly 4K OHM 2 F LH Lower Bracket 1 G Sensor Harness 2 H RH Lower Bracket 1 - Tie Straps (not shown) 15 - Hardware (not shown) 1 13
14 143154A Flex Head Sensor Kit $ or Application: 1020 Flex Head. For serial numbers JJC and above. A Sensor Assembly 4K OHM 2 B Field Tracker Header Harness 1 C LH Sensor Rod Support 1 D RH Sensor Support 1 E LH Sensor Support 1 F RH Sensor Rod Support 1 G Sensor Adapter Harness 2 H Tie Straps 15 I Sensor Connecting Rods 2 J 5/16 x 3/4 Flanged HD Tapscrew 6 3/8 x 1 Carriage Bolt 2 5/16 x 1 Hex HD Bolt 4 5/16 Flanged Locknut 4 14
15 113620A Corn Head Adapter Kit $ Application: 1044 Corn Head - 4 row wide. PTO shaft not included. Mechanical Kit only; Sensor Kit sold separately. A Bearing Support Plate 1 B RH Bearing Support Bracket 1 C Hex Drive Shaft 1 D Shield Support 1 E LH Drive Line Support Assembly 1 F Hardware Package 1 15
16 113622A Corn Head Adapter Kit $ Application: 1064 or 1084 Corn Heads - 6 row or 8 row wide. PTO shaft not included. Mechanical Kit only; Sensor Kit sold separately. A Jackshaft Bearing Support Bracket 2 B RH Bearing Shield Support 1 C LH Bearing Shield Support 1 D Rear Main Drive Shaft 2 E Jackshaft Shield Support 2 F LH Drive Line Support Assembly 1 G RH Drive Line Support Assembly 1 H Hardware Package 2 I RH Support Bracket 1 J LH Support Bracket 1 K Support Bracket 2 16
17 113621A Corn Head Adapter Kit $ Application: 1063 Corn Head - 6 row narrow. PTO shaft not included. Mechanical Kit only; Sensor Kit sold separately. A Bearing Support Plate 1 B LH Bearing Support Bracket 1 C Shield Support 1 D Hex Drive Shaft 1 E LH Drive Line Support Assembly 1 F Tube Shield 1 G Hardware Package 1 17
18 113623A Corn Head Adapter Kit $ Application: 1083 Corn Head - 8 row narrow. PTO shaft not included. Mechanical Kit only; Sensor Kit sold separately. A Bearing Support Plate 2 B RH Bearing Support Bracket 1 C LH Bearing Support Bracket 1 D Shield Support 4 E Hex Drive Shaft 2 F LH Drive Line Support Assembly 1 G RH Drive Line Support Assembly 1 H Tube Shield 2 I Shield Support Extension 2 J Hardware Package 2 K RH Vertical Support 1 L LH Vertical Support 1 18
19 187101A Corn Head Sensor Kit with Height Control $ Application: 1000 Series Corn Head. Also replaces CASEIH Part No C4. A Sensor Rod Assembly 3 B End Potentiometer Harness 2 C Center Potentiometer Harness 1 D Main Header Harness 1 E End Sensor Assembly 4K OHM 2 F Center Sensor Assembly 1K OHM 1 G Tie Straps 25 H Mounting Hardware Package 1 I Corn Head Sensor Support 3 19
20 188061A Corn Head Sensor Kit - $ Header Height Control Application: 1000 Series Corn Head. A Sensor Rod Assembly 1 B Sensor Assembly 1K OHM 1 C Potentiometer Harness 1 D Tie Straps 6 E Mounting Hardware Package 1 F Corn Head Sensor Support 1 20
21 Sensor Replacement Kit $ Application: Corn Head Sensor. Replaces old style potentiometer (CASEIH Part No A1). A 5/16-18 x.62 Hex Head Tap Screw 2 Washer - Hel Spring Lock B Sensor Wire Harness 1 C Sensor Assembly 4K OHM 1 21
22 Sensor Replacement Kit $ Application: Grain Head Sensor. Replaces old style potentiometer (CASEIH Part No A1). A 5/16-18 x.62 Hex Head Tap Screw 2 Washer - Hel Spring Lock B Sensor Wire Harness 1 C LH Sensor Support Bracket 1 D RH Sensor Support Bracket 1 E Sensor Assembly 4K OHM 1 22
23 Sensor Replacement Kit $ Application: Field Tracker Self-Center Sensor. Replaces old style potentiometer (CASEIH Part No A1). A 5/16-18 x.62 Hex Head Tap Screw 2 Washer - Hel Spring Lock B Sensor Wire Harness 1 C Sensor Bracket 1 D Sensor Assembly 4K OHM 1 23
24 Notes 24
25 Notes 25
26 Notes 26
27
28 FIELD TRACKER for CASEIH Combines Product Description and Application, inc st Avenue Mendota IL Telephone (815) C-1122 (2015)
PRODUCT INFORMATION PRODUCT INFORMATION
PRODUCT INFORMATION PRODUCT INFORMATION Grain Harvesting Axial-Flow 2013 Combine and Header Compatibility Guide This is a Sales Education document not to be used for advertising. Book: Grain Harvesting
More informationMid-Engine Rider. Parts Manual Model Revision 00 TP LT-L
Mid-Engine Rider Parts Manual Model 7800337 1741802 Revision 00 Rev. Date 05/2008 Table Of Contents PRODUCT COMPONENTS PAGES Steering... 4 Motion Drive... 6 Electrical System... 10 Chassis & Hood... 12
More informationGRAIN platform KITS. grain platform kits & 2020 Header adapter kits. 4 harvesting product support
GRAIN platform KITS GRAIN HEADER COMPLETING KITS 2010 & 2020 Header adapter kits Application: 2100/2300 Series Combines conversion kits Includes: Weldment and mounting hardware for header frame only 87362290:
More information5000 SERIES STALK DEVASTATOR CORN STALK ROLLER
5000 SERIES STALK DEVASTATOR CORN STALK ROLLER *PATENTED* 5000-025A, 5000-026A, 5000-027A, 5000-028A, 5000-034A John Deere Model Corn Heads (606C, 643, 693, 706C, 608C, 843, 893, 708C, 612C, 612FC Folding,
More informationLankota, INC. LAN AP200. Converts Older Model 900 Series Flex Or Rigid Heads To Newer 50 & 60 Series John Deere Combines. Installation Instructions
Lankota, INC. LAN AP200 Converts Older Model 900 Series Flex Or Rigid Heads To Newer 50 & 60 Series John Deere Combines Installation Instructions Kit LAN-AP200 Lankota is the trademark of Lankota, Inc.
More informationLankota, INC. LAN AR100. Adapts Older Model Row Crop Heads To Newer 50 & 60 Series Combines. Installation Instructions
Lankota, INC. LAN AR100 Adapts Older Model Row Crop Heads To Newer 50 & 60 Series Combines Installation Instructions Kit LAN-AR100 Lankota is the trademark of Lankota, Inc. 1 LAN AR100 Parts break down
More informationCombine Kit Parts List New Holland Late TR89, Late TR99 (Yield Monitor Ready)
Combine Kit Parts List Note: Indented items indicate parts included Quantity by Model in an assembly listed above Late Late TR TR Part Name/Description Part No. 89 99 Instruction Kit NH YM Ready TR89,
More information9895 Combine Parts Catalog EFF. S/N HSC8101
9895 Combine Parts Catalog EFF. S/N HSC8101 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the beginning of this publication. It is used to locate major groups, assemblies and
More informationM10/30 ILLUSTRATED PARTS LIST HERITAGE TRACTOR CODE 133E ISSUE 01/21/08. PART NO: (Rev A)
M10/30 HERITAGE TRACTOR CODE 133E ILLUSTRATED PARTS LIST CODE SERIAL NO. 133E 280000001 ISSUE 01/21/08 1741746 PART NO: 111-2202 (Rev A) Table Of Contents PRODUCT COMPONENTS PAGES Chassis & Hood... 4
More informationENCORE 52" X-TREME. 2-BAG GRASS CATCHER for units w/ S/N and above ASSEMBLY AND PARTS DIAGRAMS
ENCORE 52" X-TREME 2-BAG GRASS CATCHER for units w/ S/N 53138 and above ASSEMBLY AND PARTS DIAGRAMS Notes: ASSEMBLY INSTRUCTION Figure 1 Using 1/2" wrench, remove the discharge cover and the RH deck belt
More informationInstructions for 2-row monitoring only
Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect installation
More informationTRANSPORT AUGER - DRIVES
INDEX Section B TRANSPORT AUGER - DRIVES DRIVES for models W and WR TRANSPORT AUGERS B Description Page MD Motor drive... B2 EMD Electric motor drive: W & WR 60-70 - 80 x 26' & 31'... B3 W & WR 60 x 36'
More informationPlease read the operator manual carefully and make sure you understand the instructions before using the machine.
967327901-00 Parts Zero Manual Turn Mower Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service
More informationPFadvantage JD 3300/4400/6600/7700; 4420
Ag Leader Technology Combine Installation JD 33//66/77; 2 Note: Indented items indicate parts included Quantity by Model in an assembly listed above Early Late Part Name/Description Part Number 3 3 6 6
More informationCM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
More informationFOR SERIAL NUMBERS THROUGH 60847
PARTS MANUAL ER52FX730V FOR SERIAL NUMBERS 60706 THROUGH 60847 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX
More informationKMW PARTS PRICE LIST 1860 LOADER 2014 PART # PART DISCRIPTION LIST PRICE
PART # PART DISCRIPTION LIST PRICE 0595-3084 Decal Warning $5.28 0595-3001 Decal Warning $1.92 0595-3002 Decal Danger $2.28 0595-3003 Decal Warning $2.16 0595-3004 Decal Warning $2.04 0595-3088 Decal KMW
More informationParts List. Model Revision 00 TP LT-R
Parts List Model 7800276 Revision 00 Rev. Date 03/2008 Table Of Contents PRODUCT COMPONENTS PAGES Steering... 4 Engine Mount... 6 Motion Drive... 8 Electrical System... 12 Chassis & Hood... 14 Decals...
More informationParts Order Information
Parts Order Information Contact Info: TEMP Farm Equipment Ltd. 3890 Wellington St. Box 269 Mitchell, Ontario, Canada N0K-N0 Phone: -877-348-0066 or 59-348-0066 Fax: 59-348-006 PARTS BOOK John Deere 600F
More informationMODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016
Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 06/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway Equipment
More informationAssembly Instructions. Before You Start. Assembly Instructions. 3-Point Bedded Irrigation. Used with: 3-Point Drills
Great Plains Mfg., Inc. Assembly Instructions! 3-Point Bedded Irrigation Used with: 3-Point Drills When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
More informationFOR SERIAL NUMBERS 21304U00192 THROUGH U00534
PARTS MANUAL WYS52FX730V FOR SERIAL NUMBERS 21304U00192 THROUGH 201308U00534 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationModel 873 COMBINE ADAPTER
Model 873 COMBINE ADAPTER For 963, 972, 973 & 974 Headers on: Case Combines New Holland Combines John Deere Combines Lexion Combines Agco Combines PARTS CATALOG Form 147071 Issue 09/06 Sugg. Retail: $10.00
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 213 www.fisherplows.com 8001 1, 8004 1, 800 1 January 1, 201 Lit. No. 54, Rev. 02 Hopper and Drive Components POLY CASTER Hopper Spreader Parts
More informationHopper and Drive Components
Fisher Engineering 0 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 99000, 99001 9900, 99009 April 1, 2017 Lit. No. 9994, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader With
More informationHopper and Drive Components
Fisher Engineering 0 Gordon Drive, Rockland, Maine 0484 39 www.fisherplows.com 99000, 9900 9900, 99009 January, 07 Lit. No. 9994, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader With Electric
More informationInstructions for 2-row monitoring only
Installation Instructions for CaseIH cotton picker models: Instructions for 2-row monitoring only CAUTION: Ensure the model numbers shown above correspond to the machine model. If you receive the incorrect
More informationAssembly Instructions. General Information. Installation Instructions. 12, 15 and 20 Series Drill Small Seeds Option. Used with:
Installation Instructions! Used with: 1200, 1210 and 1220 Drills 1500, 1510 and 1520 Drills 2000, 2010 and 2020 Drills 12, 15 and 20 Series Drill Small Seeds Option When you see this symbol, the subsequent
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL HD, R & THD SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBER AFTER: HDG00000 FOR DOWN PRESSURE HYDRAULICS WITH SERIAL NUMBERS AFTER:
More informationCab Kit Groundsmaster 360 Multi-Purpose Machine
Form No. 3401-534 Rev A Cab Kit Groundsmaster 360 Multi-Purpose Machine Model No. 31220 Register at www.toro.com. Original Instructions (EN) *3401-534* A Ordering Replacement Parts To order replacement
More informationPARTS LISTS AND DIAGRAMS
PARTS LISTS AND DIAGRAMS Duetz-Allis Gleaner Combine Crary Company 237 NW 12th St. PO Box 849 West Fargo, ND 58078-0849 (800)247-7335 FAX: (701)282-9522 www.crary.com Part #12088 Companion to Part #12071
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL HD, R & THD SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBER AFTER: HDG00000 FOR DOWN PRESSURE HYDRAULICS WITH SERIAL NUMBERS AFTER:
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS FOR PLOW SERIAL NUMBERS AFTER D0000 G0000 00 Sno-Way International 9F TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... POWER PACK FRAME... BLADES... HYDRAULIC SYSTEM
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 November 1, 2017 Lit. No. 99754, Rev. 04 Hopper and Drive Components POLY CASTER Hopper Spreader
More informationCommercial Walk-Behind Mower Fixed Deck, Pistol Grip, Gear Drive with 32in Cutting Unit
Form No. 3391-559 Rev A Commercial Walk-Behind Mower Fixed Deck, Pistol Grip, Gear Drive with 32in Cutting Unit Model No. 30632 Serial No. 315000001 and Up Register at www.toro.com. Original Instructions
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 March 15, 19 Lit. No. 99754, Rev. 06 Hopper and Drive Components POLY CASTER Hopper Spreader
More informationAFTERMARKET PRICE GUIDE 2018
AFTERMARKET PRICE GUIDE 2018 Orbit TM Trac II Reels - Flip Reel Kit Tines - Paddle Tine Gateway Sieves/Chaffers Level II Reels Level II / ML Service Parts HCC, inc. 1501 First Ave. Mendota, IL, 61342 Effective
More informationLANSSDR1230R4GTF. Installation Instructions. Lankota GENERATION II Stalk Stomper Kit for Drago 1230 GT Series Folding Corn Head - 4 Row Coverage
LANSSDR1230R4GTF Installation Instructions Lankota GENERATION II Stalk Stomper Kit for Drago 1230 GT Series Folding Corn Head - 4 Row Coverage 270 West Park Avenue Huron, SD 57350 866-526-5682 Page 1 Numerical
More informationHopper and Drive Components
Western Products, PO Box 2508, Milwaukee, WI 522-958 www.westernplows.com January 15, 2016 Lit. No. 99755, Rev. 00 Hopper and Drive Components Tornado Hopper Spreader Parts List This Parts List is for
More informationParts Manual Zero Turn Mower / Z 254i
Parts Manual Zero Turn Mower / Z 254i 967324201-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationHORSE III 8HP ROTO TILLER (S/N ) Page 1 of 25 Bolo Tine Assemblies
HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 1 of 25 Bolo Tine Assemblies HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 2 of 25 Bolo Tine Assemblies 1 GW-2415 2 S/F TINE HOLDER- welded steel.
More informationHopper and Drive Components
Western Products, PO Box 45038, Milwaukee, WI 534-9538 www.westernplows.com January 15, 019 Lit. No. 437, Rev. 0 Hopper and Drive Components Striker Hopper Spreader with Electric Motors #99030-1, 99031-1,
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Front Gauge Wheels Section 4 Model Years 1992 1994... 2-5 Model Years 1995 1996... 6-9 Model Years 1997 Present... 10-11 Front Gauge Wheel Divider 1992 Present...
More informationLankota, INC. LAN Installation Instructions
Lankota, INC. LAN - 84206 Converts 600 Series Platform Heads to 50 Series & Earlier Model Combines. Installation Instructions Kit LAN84206 Lankota is the trademark of Lankota, Inc. 1 LAN 84206 Parts break
More informationHoney Bee. New Holland
PARTS MANUAL CRARY WIND SYSTEM Honey Bee Grain Belt Grain Belt PLUS New Holland 88C 9C Manual P/N 5292-00 Rev. 06009 Companion to P/N 529-00 SN Range: 0-807668 HOW TO REACH US ADDRESS HOURS TELEPHONE FAX
More informationMfg. No: EED, B&S 11.5 Gross TP 22" Single
Parts Manual Mfg. No: 1696507-00 1222EED, B&S 11.5 Gross TP 22" Single Copyright Briggs and Stratton. All Rights reserved 02-Nov-2017 Model Components Table Of Contents Page Auger Drive Group....................................................................................
More informationILLUSTRATED PARTS LIST MODEL NUMBER 15530SB-LS PRODUCT NUMBER MFG. ID. NUMBER TH
ILLUSTRATED PARTS LIST MODEL NUMBER SB-LS PRODUCT NUMBER 00- MFG. ID. NUMBER 000-0.0.0 TH AUGER HOUSING / IMPELLER ASSEMBLY 0 0 (EXPLODED) 0.0.0-C NOTE: All component dimensions given in U.S. inches. inch
More informationPARTS CATALOG MUD HOG REAR WHEEL DRIVE
PARTS CATALOG MUD HOG REAR WHEEL DRIVE For Case IH AF 7230, 8230, 9230 Combines TUTHILL DRIVE SYSTEMS MODEL NUMBERS: CNH14023 DUAL SPEED KIT FOR CASE IH AF 7230, 8230, 9230 COMBINES A Product of Tuthill
More informationHopper and Drive Components
Western Products, PO Box 45038, Milwaukee, WI 534-9538 www.westernplows.com August 1, 0 Lit. No. 437, Rev. 00 Hopper and Drive Components Striker Hopper Spreader With Electric Motors #99030-1, 99031-1,
More informationHoney Bee. New Holland
PARTS MANUAL CRARY WIND SYSTEM Honey Bee Grain Belt Grain Belt PLUS New Holland 88C 9C Manual P/N 5292-00 Rev. 06009 Companion to P/N 529-00 SN Range: 807669-A0265 HOW TO REACH US ADDRESS HOURS TELEPHONE
More informationParts Manual Zero Turn Mower / Z
Parts Manual Zero Turn Mower / Z 254 967324101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationLANSSDR1230R6GTF. Installation Instructions. Lankota GENERATION II Stalk Stomper Kit for Drago 1230 GT Series Folding Corn Head - 6 Row Coverage
LANSSDR1230R6GTF Installation Instructions Lankota GENERATION II Stalk Stomper Kit for Drago 1230 GT Series Folding Corn Head - 6 Row Coverage 270 West Park Avenue Huron, SD 57350 866-526-5682 Page 1 Numerical
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-139 www.fi sherplows.com 99000-1, 99001-1 99005-1, 99009-1 June 15, 018 Lit. No. 43759, Rev. 01 Hopper and Drive Components STEEL-CASTER Hopper
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 78001-1, 78004-1, 78007-1 August 1, 18 Lit. No. 99754, Rev. 05 Hopper and Drive Components POLY-CASTER Hopper Spreader
More informationPARTS MANUAL EE60FX730V34CA EE52FX691V34CA
PARTS MANUAL EE48FR691V32 EE48FR691V32CA EE60FX730V34 EE60FX730V34CA EE52FR691V32 EE52FR691V32CA EE52FX691V34 EE52FX691V34CA 2 WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 9, 9T & SERIES SNOW PLOWS WITH EIS FOR PLOW SERIAL NUMBERS AFTER 9G100000, 9D100000, 9C100000 9TG100000, 9TD100000, 9TC100000 G10000, D100, C10000 00 Sno-Way International 910089H
More informationWARNING. PN Rev Crary Big Top Instruction Sheet Big Top No , 53408, & 54289
ASSEMBLY INSTRUCTIONS CASE IH 50, 60/0, 010/010 & 120/120/9120 SERIES NEW HOLLAND CR STD SERIES COMBINES (LARGE) BIG TOP 5424, 5340, 542 & 5429 The Crary Big Top Large Extension fits right on top of the
More informationPlease read the operator manual carefully and make sure you understand the instructions before using the machine.
967327801-00 Parts Zero Manual Turn Mower Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service
More informationGERINGHOFF. Corn Header Manual f HEADSIGHT.COM
GERINGHOFF Corn Header Manual 09020701f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationWYDB60FS691V34 WYDB60FS691V34CA WYDB52FR691V32CA WYDB52FX691V34CA WYDB60FX691V34 WYDB60FX691V34CA PARTS MANUAL
WYDB48FR691V32 WYDB48FR691V32CA WYDB52FR691V32 WYDB52FR691V32CA WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WYDB60FS691V34 WYDB60FS691V34CA WYDB52FX691V34 WYDB52FX691V34CA WYDB60FX691V34
More informationA CAB KIT (Shown with GLASS DOORS KIT A-11859)
Cab Installation Instructions for John Deere One Series, 1023E, 1025R and 1026R Model Series A-11976 CAB KIT (Shown with GLASS DOORS KIT A-11859) FOR USE WITH OPTIONAL KITS; A-11859 GLASS DOORS WITH NON-OPENABLE
More informationCATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION ML-44103, ML ML-44105, ML ML-26243
CATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION W32 W32C 625A HP ML-44103, ML-26320 ML-44105, ML-26331 ML-44069 ML-26243 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001
More informationAWS PARTS BOOK MacDon FD70 Header Mount Models
Parts Order Information AWS PARTS BOOK MacDon FD7 Header Mount Models Contact Info: TEMP Farm Equipment Ltd. 389 Wellington St. Box 269 Mitchell, Ontario, Canada NK-N Phone: -877-348-66 or 59-348-66 Fax:
More informationAWS PARTS BOOK Case 2020 Series Header Mount Models
Parts Order Information AWS PARTS BOOK Case 2020 Series Header Mount Models Contact Info: TEMP Farm Equipment Ltd. 3890 Wellington St. Box 269 Mitchell, Ontario, Canada N0K-N0 Phone: -877-348-0066 or 59-348-0066
More informationMODEL SUPER P Parts List
MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway
More informationMODEL NUMBER 14527SB-LS PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED S LIST MODEL NUMBER SB-LS PRODUCT NUMBER 9 9 00-9 MFG. ID. NUMBER 9900900 009-0 -90 Rev. 0.09.09 SR AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9
More informationWYDB52CT810V34 WYDB52CT810V34CA PARTS MANUAL
WYDB52FR691V32 WYDB52FR691V32CA PARTS MANUAL WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWN.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255
More informationMauser KS-534 Full Safety Cab Kit CT2120/CT2140/CT2240/LT3340 and Groundsmaster 3400 Mowers
Form No. 3384-267 Rev A Mauser KS-534 Full Safety Cab Kit CT2120/CT2140/CT2240/LT3340 and Groundsmaster 3400 Mowers Model No. 02890 Serial No. 314000001 and Up Register at www.toro.com. Original Instructions
More informationPARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA
PARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA 2 A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationMODEL WB-36 MANUAL WALK BEHIND POWR BROOM POWER BROOM DIVISION COMPANIES, INC. OF WISCONSIN M-B B/M ; /78 NEW HOLSTEIN WI 53061
WALK BEHIND POWR BROOM MODEL WB-36 MANUAL B/M 800-93181; 430-93169/78 24"; 36"; 48" X 20" WALK BEHIND POWER BROOM M-B COMPANIES, INC. OF WISCONSIN POWER BROOM DIVISION 1615 WISCONSIN AVENUE NEW HOLSTEIN
More informationReproduction. Not for. Parts Manual. Hydro Drive Electric Clutch. All Wheel Steering Lawn Tractor. Products
Parts Manual Hydro Drive Electric Clutch Products Mfg. No. Description 7800511 AC23460AWS 23HP Hydro and 46" Mower Deck All Wheel Steering Lawn Tractor 7800543 AC23460AWS 23HP Hydro and 46" Mower Deck
More informationTR-34D Trench Roller
Form No. 3393-256 Rev A TR-34D Trench Roller Model No. 68039 Serial No. 315000001 and Up Register at www.toro.com. Original Instructions (EN) *3393-256* A Ordering Replacement Parts To order replacement
More informationFor New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090
PARTS CATALOG MUD HOG REAR WHEEL DRIVE For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090 TUTHILL DRIVE SYSTEMS MODEL NUMBERS: CNH4005
More informationParts Order Information
Parts Order Information Contact Info: TEMP Farm Equipment Ltd. 3890 Wellington St. Box 269 Mitchell, Ontario, Canada N0K-N0 Phone: -877-348-0066 or 59-348-0066 Fax: 59-348-006 PARTS BOOK Lexion F535-F540
More informationCHIPPER/SHREDDER SERIES
Parts Manual CHIPPER/SHREDDER SERIES SIMPLICITY MODELS Mfg. No. Description 1692201 2/10, 2C Chipper/Shredder (Electric Motor) 1692202 3/10 Chipper/Shredder (Electric Motor) 1692203 5C Chipper/Shredder
More informationWX/R Xpeditor. Collision Parts Reference Book. For parts information and ordering, call the Autocar Parts Department at
WX/R Xpeditor Collision Parts Reference Book Updated 11 January 2008 Version 1.7 For parts information and ordering, call the Autocar Parts Department at WX/R Collision Parts Included In This Book Cab
More information126in Quadfloat Mower Groundsmaster 455 D
Form No. 3326-597 126in Quadfloat Mower Groundsmaster 455 D Model No. 30402 210000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity,
More informationPARTS MANUAL WYDB60FX691V34CA WYDB52FX691V34E
PARTS MANUAL WYDB48FR691V32 WYDB48FR691V32CA WYDB52FR691V32 WYDB52FR691V32CA WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WYDB60FS691V34 WYDB60FS691V34CA WYDB52FX691V34 WYDB52FX691V34CA
More informationMODEL NUMBER ST230E PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED PARTS LIST MODEL NUMBER ST0E PRODUCT NUMBER 0000 MFG. ID. NUMBER 00-0 - AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL NO. ST0E (0000), PRODUCT NO. 00-0 0 0 (EXPLODED) 0.0.0-F NOTE:
More informationLankota, Inc. LAN Installation Instructions
Lankota, Inc. LAN - 84108 Installation Instructions Converts 90 Series Corn Heads With Hydraulic Deck Plates To Single Point Hook Up On 60 series combines. Kit LAN-84108 Lankota is the trademark for Lankota,
More informationReproduction. Not for. Walk Behind Mowers 19" & 21" Parts Manual. Attachments
Parts Manual Attachments Walk Behind Mowers 19" & 21" Mfg. No. Description 881633 ESPV19875EXAL, 19" Self Propelled Walk Mower (Export) 881634 ESPV21875EXAL, 21" Self Propelled Walk Mower (Export) Manual
More informationIllustrated Parts Manual
Illustrated Parts Manual Models 522D LoPro 524D LoPro S/N 0900 P/N - 948-403 Revised July 6, 2007 INTRODUCTION Table of Contents SECTION INTRODUCTION Table of Contents... - thru -4 Alphabetical Index...
More informationREPAIR PARTS MANUAL MODEL: MC900 FRONT TINE TILLER ALWAYS WEAR EYE PROTECTION DURING OPERATION
REPAIR PARTS MANUAL MODEL: MC900 FRONT TINE TILLER ALWAYS WEAR EYE PROTECTION DURING OPERATION 53 43 99- Rev. 1 HANDLE ASSEMBLY 3 1 1 3 4 5 10 11 9 19 0 14 7 7 8 1 13 FT-handle_assy r1 ITEM MFG. ARIENS
More informationMF 9690, 9790, Challenger 660, 670
Ag Leader Technology Parts List Note: Indented items indicate parts included in an assembly listed above Quantity by Model Part Name/Description Part No. MF 9690 MF 9790 Challenger 660 Challenger 670 Instruction
More informationDRAGO. Corn Header Manual f HEADSIGHT.COM
DRAGO Corn Header Manual 09020801f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationIllustrated Parts Manual
Illustrated Parts Manual Model Series 26J Mini Rider MTD LLC, P.O. BOX 3631 CLEVELAND, OHIO 136-0019 Printed In USA Form No. 769-0978 (November 08, 2013) To The Owner Thank You Thank you for purchasing
More informationParts Catalog. WY36 Commercial Mower
Parts Catalog R WY36 Commercial Mower Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE 68310 Toll Free Number: 1-800-267-4255 Table of Contents Table of Contents Mower Assembly.
More informationPARTS BOOK MacDon FD75
Parts Order Information PARTS BOOK MacDon FD75 Contact Info: TEMP Farm Equipment Ltd. 3890 Wellington St. Box 269 Mitchell, Ontario, Canada N0K-N0 Phone: -877-348-0066 or 59-348-0066 Fax: 59-348-006 Parts:
More informationGrass Catcher. Instructional / Parts Manual Part Number: January ( & ) & Drive Kits ( , , )
Grass Catcher Instructional / Parts Manual Part Number: January 200 5020 ( 507 & 5026 ) & Drive Kits ( 52030, 5203, 52032) Table of Contents Z RIDER GRASS CATCHER TWO PACKAGED ITEMS LIST 507 BLOWER ASSEMBLY
More informationAWS PARTS BOOK Combine Mount Models
AWS PARTS BOOK Combine Mount Models Version 120822 TABLE OF CONTENTS PARTS ORDER INFORMATION... 3 COMBINE MOUNT FAN COMPONENTS... 4 ALL MODELS: BLOWER ASSEMBLY... 5 ROTARY SCREEN ASSEMBLY... 6 THROTTLE
More informationGeneral Information. Assembly Instructions. Point-Row Option 2004-
3000-3S Used with: 3000-3S General Information! When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!
More informationQuadfloat 126 For Groundsmaster 455D
Form No. 3324 134 Quadfloat 126 For Groundsmaster 455D Model No. 30402 200000201 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity,
More informationWYS52FX730VCA FOR SERIAL NUMBERS U00681 AND ABOVE
PARTS MANUAL WYS52FX730V WYS52FX730VCA FOR SERIAL NUMBERS 201312U00681 AND ABOVE 2 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS FOR PLOW SERIAL NUMBERS AFTER D00000 G00000 007 Sno-Way International 9700D TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... POWER PACK FRAME... BLADES... HYDRAULIC
More information29" GAS DRYER MODELS: MGD6000XW2 (White) MGD6000XR2 (Red) MGD6000XG2 (Cosmetallic) 08/08/ Maytag Part No. W Rev.
29" GAS DRYER MODELS: MGD6000XW2 (White) MGD6000XR2 (Red) MGD6000XG2 (Cosmetallic) 08/08/2013 2013 Maytag Part W10485758 Rev. B TOP AND CONSOLE PARTS 08/08/2013 2 Part W10485758 Rev. B TOP AND CONSOLE
More informationINSTALLATION MANUAL HYDRAULIC HOSE REEL
INSTALLATION MANUAL HYDRAULIC HOSE REEL 1 TABLE OF CONTENTS SECTION PAGE SECTION PAGE 1 HOW TO ORDER PARTS 3 MAINTENANCE SCHEDULE... 11 1.1 HOW TO ORDER PARTS... 2 1.2 MODEL IDENTIFICATION... 3 2 INSTALLATION
More information5000 SERIES STALK DEVASTATOR CORN STALK ROLLER
5000 SERIES STALK DEVASTATOR CORN STALK ROLLER *PATENTED* 5000-026A 8 ROW JD (608C, 843, 893) OWNER S MANUAL PART IDENTIFICATION 2565-794_RevC 08/2017 YETTER MANUFACTURING CO. Founded 1930 Colchester,
More information