light ANATOMY SLEEK & STRONG CORE CAPACITY

Transcription

1 D6

2 ANATOMY SLEEK & STRONG A perfectly square aluminum extrusion made of 60% recycled material provides durable functionality in an elegant compact form. POWERFUL PERFORMANCE High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design CORE CAPACITY Integral 0-10V dimming driver down to 1%. Additional options include Lutron, DMX, and DALI control protocols. Integral IOTA slim 12W emergency battery pack provides an easy solution for egress compliance. PROPRIETARY OPTICS SEAMLESS INTGRATION 1 flat channel or beveled flange options specifically designed for 6 utility ceiling systems such as USG Logix, 6 Armstrong Techzone or similar O.C. HE Tech lens technology cleanly combines optical diffusion and high performance reflector design to deliver beautifully refined with uncompromised performance. ELEMENTS Elements is a simplified product line comprised of 4, 8, and 12 nominal length fixtures that can be joined to create continuous rows. INTEGRATIONS Integrations is a comprehensive product line comprised of nominal and exact length fixtures, continuous rows, and patterns comprised of 90 illuminated corners R For rows over 12 (R) fixtures will be shipped in sections. Joining hardware for field installation is provided. CUSTOM A completely custom ordering process allowing unique modifications and non-90 transitions is available through collaboration with Design Assist. ANATOMY ALIGHTS.COM 2

3 PHOTOMETRY LIGHT OUTPUT DISTRIBUTION Direct Symmetric OUTPUT LH: High output -10 W/ft LS: Standard output - 5 W/ft C: Custom tuned output - Specify Wattage LIGHT LOSS FACTORS LH: Baseline LS: 50% 4000K: Baseline 3500K: 97% 3000K: 93% 80+CRI: Baseline 90+CRI: 80% PHOTOMETRIC DATA DIRECT SYMMETRIC LH K - HE TECH Lumens: 829 lm/ft Input watts: 9.7 W/ft Efficacy: 85 lm/w DLH DLS SAMPLE INSTALLATION - WORKSPACE LH / HE / 4000K Room height: 20 ft x 30 ft x 9 ft Reflectance: 80% / 50% / 20% Mounting height: 9 ft A.F.F. Fixture length: 4 ft Calculation grid: 2 ft x 2 ft Calculation plane (horizontal): 2.5 ft A.F.F. Average Illuminance: 37 fc Fixture spacing: 8 ft x 10 ft Uniformity: 1.5:1 (avg/min) TOP VIEW 35 fc 30 fc 3 PHOTOMETRY ALIGHTS.COM

4 MOUNTING (T) 6 O.C. T-bar 9/16 (BS) Beveled Smooth Trim Flange (X) 6 O.C. T-bar 15/16 (N) 6 O.C. T-bar 9/16 Slot (BS) Beveled Smooth Trim Flange (BS) Beveled Smooth Trim Flange (T) 6 O.C. T-bar 9/16 (X) 6 O.C. T-bar 15/16 (N) 6 O.C. T-bar 9/16 Slot (CS) Channel Static Trim Flange (CS) Channel Static Trim Flange (CS) Channel Static Trim Flange - Air handling option: airflow through luminaire MOUNTING ALIGHTS.COM 4

5 D6 SPECIFICATION GUIDE ORDERING CODE D HE O.C. PROJECT INFO TYPE DATE QUANTITY PERFORMANCE AT 4000K LIGHT LOSS FACTORS OUTPUT High Standard NOMINAL LUMEN OUTPUT 829 lm/ft lm/ft INPUT WATTS 10 W/ft 5 W/ft EFFICACY 85 lm/w 85 lm/w BASELINE OUTPUT LH LS - 50% LED CCT 4000K 3500K - 97% 3000K - 93% CRI 80+ CRI 90+ CRI - 80% Custom tuned output available from 25% to 125% of high output. Please consult factory for custom lumen output and wattage. MOUNTING OPTIONS (T) 6 O.C. T-Bar 9/16 (BS) Beveled Smooth Trim Flange (X) 6 O.C. T-Bar 15/16 (BS) Beveled Smooth Trim Flange (N) 6 O.C. T-Bar 9/16 Slot (BS) Beveled Smooth Trim Flange D6 HE SERIES LENGTH OUTPUT LED CCT VOLTAGE DIRECT OPTICS D6 _ M_ Nominal Length* Exact Length** LS LH C_ LED Standard Output LED High Output LED Custom Output* K 3500K 4000K U 3 Universal 120V - 277V 347V HE HE Tech *Specify in feet to the nearest foot (i.e. N12) **Specify in inches to then nearest 1/8 (i.e. M ) *Available from 25% to 125% of LED High Output MOUNTING TRIM FLANGE FINISH DIMMING EMERGENCY T X N 6 On Center Standard T-Bar 9/16 * 6 On Center Standard T-Bar 15/16 * 6 On Center Standard T-Bar 9/16 Slot* BS CS AH Beveled Smooth Channel Static Air Handling T W B O_ a anium Satin White Satin Black Other* D D1 D3 Standard 0-10 dimming* Lutron Eco H series (LDE1) Other Dimming** EC E_ Emergency - circuited Emergency - battery* *Ceiling systems USG Logix, 6 Armstrong Techzone or similar. *Specify RAL# *Dimming to 1% stated for standard 0-10v dimming **Specify model/series *Factory-installed emergency battery pack: ILB-SL-CP12 (1200lm for 90min). Specify desired quantity of batteries. Not available on fixtures < 4 length. Not available for 347V. See technical data for more information. O P SENSORS Occupancy Sensor* Photocell / Day Sensor** *Wattstopper FS-205 (Ø1 ) **Wattstopper FD-301 wired for day harvesting. Requires 0-10v dimming. MRL_ MRH_ M R L N CRI CP MRI OPTIONS MR16 LED* MR16 Halogen* Multi-Circuit** Right Endcap Feed Left Endcap Feed New York City Code 90+ CRI Chicago Plenum MRI *Enter quantity. Submit MR16 addendum **Submit multi-circuiting requirements 37 Maritime Way Oceanside, CA as.com Damp Location Rated IC Rated

6 TECHNICAL DATA LINEAR DIMENSIONS Elements - 4, 8, and 12 nominal length individual fixtures that can be joined to create continuous row lengths. Integrations - Nominal or exact lengths to the nearest 1/8th of an inch available as individual fixtures or joined to create continuous row lengths, minimum fixture lengths is 12 inches. Patterns comprised of 90 degree precisely welded fully illuminated corners provide a multitude of geometric options and architectural transitions. Custom - Contact Design Assist for modifications to product not detailed within Elements or Integrations specification sheets. OPTICS HE Tech patented high efficacy extruded diffuse acrylic lens technology with integrated opaque white reflector delivers superior lumen output with optimal uniform lens surface luminance for direct distribution. LED LIGHT SOURCE Custom manufactured linear board array uses high performance Nichia LED in combination with a performance driven heat sink technology. Tested in accordance with LM79 and LM-80; L70>60,0000hr; operated at reduced output for high efficacy and lumen maintenance. 3000K, 3500K, and 4000K with 80+ CRI standard; other color temperatures and 90+ CRI available upon request, contact factory. LED color variation maintained at a 3-step MacAdam ellipse (SDCM 3x). LEDs are available in Low, Standard, and High outputs. Refer to photometry for delivered lumens. Custom output in the range of 25% to 125% of high output, contact factory. LED DIMMING DRIVER Factory tuned constant current electronic 0-10V control dimming driver is standard. Specification grade dimming down to 1%. Driver life of 50,000 hrs with ambient operating temperature range of -30 C to 50 C, maximum case temperature of 75 C. Electrical specifications at maximum driver load: PF >0.9, THD <20%, >85% Efficiency. Other available drivers include Lutron Eco-system H-series (LDE1): Hi-lume 1% LED dimming driver with Soft On, Fade to Black; and DMX and DALI protocol drivers. Other Lutron and specialty drivers available, contact factory. EMERGENCY This luminaire is provided with a factory installed LED emergency ing battery pack for both normal and emergency operation, v only. This fixture integrated unit contains long-life Ni- Cad recyclable battery, 24 hour charger, and converter circuit. Test switch and charge indicator provided. Test button to be remote located within 3 feet of the luminaire, by others in accordance with local code. Emergency mode provides constant power to a nominal 12W LED load for a period of 90 minutes, delivering 1200 lumens of unwavering illumination throughout the full 90 minute emergency duration. Unless otherwise specified, the emergency battery pack will illuminate one 2 foot end in the direct portion of the fixture. CONTROLS Low-profile integral occupancy and day sensors are available to deliver high performance control in an architecturally pleasing package. Integral occupancy sensor - the sleek Wattstopper FS-205 modular plugin system utilizes a RJ45 connector, low voltage cord, and power pack. Automatic on/off passive infrared (PIR) occupancy sensing control covers a range of 200 square feet for a specified 30 second to 30 minute time delay with an optional ambient day sensing function to hold s off when specified adequate day level is sensed. Factory default time delay of 30 minutes and 120fc level. Settings can be adjusted at the factory or easily in the field. Integral day sensor - the sophisticated Wattstopper FD-301 is a low voltage controller using 0-10VDC input to automatically dim the electric ing system based on day contribution in a 70 field of view to achieve a target illuminance using a sliding setpoint algorithm. This single zone closed loop day harvesting control system utilizes a RJ45 connector, low voltage cord, and power pack. One (1) LSR-301-S setup remote control to adjust target let levels is provided per order. Combined occupancy and day sensing is achieved using both the FS- 205 and FD-301 for more versatile control functionality including automatic on/off occupancy and day dimming response. Other manufacturer controls may be available for product integration, contact factory. MOUNTING Common recessed mounting options available. Contact factory for applications regarding modified recessed mounting conditions. Flush Gypsum Flange. Raw aluminum flange is attached to blocking (by others), then mudded over and/or painted by installing contractor to provide a flangeless fixture appearance in recessed ceiling/wall applications. Trim Flange. 1/2 wide visible powder coated flange, specify finish requirement. Fixture is mounted to structure using threaded rod (by others) or ceiling tie wires (provided). Use of a-clamp secures fixture trim and housing around ceiling/wall material. Use for any gypsum or hard ceiling/ wall that requires a minimal flange covering the ceiling cut-out edge. T-Bar/Grid Ceiling. 9/16 or 15/16 standard T-Bar or 9/16 slot ceiling. Raw aluminum flange sits on T-Bar and is concealed from view. 6 Armstrong Techzone / USG Logix or other 4 Utility Systems. 9/16 or 15/16 standard T-Bar or 9/16 slot ceiling. Suitable for use in 4 oncenter standard or slot T-Bar systems. Approximate 1 wide visible side flanges create a seamless 4 slot condition, specify finish requirement. Emergency circuiting provided as a separate circuit from normal power circuit according to NEC requirements, specify circuit length and location. ALIGHTS.COM 6

7 STRUCTURE Robust, high quality 60% recycled aluminum extruded housing thick aluminum internal gear trays. Flat or flanged aluminum end caps. Aluminum joiner brackets. 4 lbs/ft approximate fixture weight. Air handling option provides 6.75 square inches of opening every foot. Only available with Channel Static trim flange. FINISH Electrostatically applied powder coat finish. Standard finish options include aanium, satin white, and satin black. Other colors and custom finish options available, specify RAL# or contact factory regarding custom finish requirement. LISTING IC Rated for IC, Airtight, CCEA Ceilings. CCEA mark applied for Chicago Plenum applications. UL/CUL rated for Damp Locations. Tested in accordance with UL 1598 and certified to CEC/CSA C22.1, NEC, ANSI/ NFPA 70, and NOM-001-SEDE. WARRANTY Limited defect-free manufactured equipment warranty provided under normal use and proper storage for a period of one (1) year. LED products (LED boards and drivers) will be covered for a period of five (5) years. MR16 MODULES Heavy-duty, milled aluminum plate module contains recessed cutouts for flush mounting of LED module (supplied) or halogen MR16 lamp (by others). Specification and layout of modules and lamping per MR16 SPECIFICATION ADDENDUM. 7 TECHNICAL DATA ALIGHTS.COM

8 LED OR HALOGEN MR16 SPECIFICATION ADDENDUM REQUIRED SPECIFICATION INFORMATION AS ADDENDUM TO CUT SHEET LED MR16 (MRL ) HALOGEN MR16 (MRH ) Configuration Configuration E Modules located on fixture ends E Modules located on fixture ends C C Modules located in center of fixture Modules located in center of fixture EC EC Modules located in center and on ends Modules located in center and on ends P P Custom configuration Custom configuration Wattage Wattage 4 4W 8 8W MF 35W aluminized backened or 37W IR lamp lamps are not included (by others) Voltage U Universal 120V V CCT K (ansi binned warm white) K (ansi binned neutral white) MZ Voltage 1 120V 2 277V Dimming 20W aluminized backed or 20W IR lamps lamps are not included (by others) Beam Angle 17 17º total beam angle (narrow spot) 48 48º total beam angle (wide flood) Dimming D Dimming for module (if dimming is desired for entire fixture and MR16 modules choose D on this sheet and under options on fixture cutsheet) D Dimming for module (if dimming is desired for entire fixture and MR16 modules choose D on this sheet and under options on fixture cutsheet) 8 M R16 ADDENDUM ALIGHTS.COM

9 LED OR HALOGEN MR16 SPECIFICATION ADDENDUM LED MR16 (MRL ) MODULE CONSTRUCTIONS: Heavy-duty, milled-aluminum plate module contains one recessed cutout and a flush mounted LED module. Internal gimbal device allows easy lamp adjustability, with continuous rotation greater than 360º, aimable vertically up to 15º angle on D (3.5 ) series and 30º on G (5 ) series. CIRCUITING STANDARDS: MR16 s are on a separate circuit from linear section of the fixture. D dimming is required on the addendum if dimming is desired for MR16 s. If dimming is also desired for the linear section, D must be specified on the fixture cutsheet as well. LAYOUT: Indicate quantity of modules per row after MRL_ in fixture cutsheet nomenclature. i.e. MRL1, MRL2, MRL3, etc. Module length to be determined by factory and shown in submittal drawings for approval. Typical module length is approximately 6. All module lengths are approximate until ceiling and row configuration is known. Module lengths may be specially constructed for irregular row lengths in certain ceilings. Modules may be specified up to 48 long. INTEGRAL DRIVER: Universal 120v or 347v driver. FINISH: Electrostatically applied post powder coat module finish. Color will match luminaire unless otherwise specified. LISTING: UL/CUL. Damp location is standard. All precise module lengths will be determined by factory to accommodate for row length variations due to ceiling type and to allow for proper ventilation. HALOGEN MR16 (MRH ) MODULE CONSTRUCTION: Heavy-duty, milled-aluminum plate module contains one recessed cutout for flush mounting of a single MR16 lamp. Internal gimbal device allows easy lamp adjustibility, with continuous rotation greater than 360º, aimable vertically up to 30º angle. CIRCUITING STANDARDS: MR16 s are on a separate circuit from linear section of the fixture. D dimming is required on the addendum if dimming is desired for MR16 s. If dimming is also desired for the linear section, D must be specified on the fixture cutsheet as well. LAYOUT: Indicate quantity of modules per row after MRH_ in fixture cutsheet nomenclature. i.e. MRH1, MRH2, MRH3, etc. Module length to be determined by factory and shown in submittal drawings for approval. Typical module length is approximately 6. Because of the significant heat output of Halogen MR16 lamps, module lengths will be spaced up to 12 when placed adjacent to one another. Single modules separated by fluorescent will be approximately 6 in length. If 2 modules are adjacent, modules will be approximately 9. If 3 or more modules adjacent, modules will be approximately 12. Stand alone modules require more air-flow and start at 9 for a single. All modules lengths are approximate until ceiling and row configuration is known. Module lengths may be specially constructed for irregular row lengths in certain ceilings. Modules may be specified up to 48 long. INTEGRAL DRIVER: Halogen 120v or 227v dedicated voltage, low voltage electronic transformer, high power factor, sound rating A+, UL listed Class P, Type 1. Dimming: Controls must be compatible with electronic low voltage. LAMP SPECIFICATION: Lamps are not included (by others). Specify glass enclosed (encapsulated) MR16 lamps with aluminized backing or IR technology for use in recessed luminaire for proper heat dissipation. Specify MF_ (enter quantity) when using 35w aluminized backed or 37w IR lamps. Specify MZ_ (enter quantity) when using 20w aluminized backed or 20w IR lamps. Depending on wattage chosen, fixture will be labeled indicating maximum lamp wattage allowed: Max 20w or Max 37w. LAMP RECOMMENDATIONS: Read lamp manufacturers technical data to be certain it may be applied in recessed/enclosed/non-ventilated luminaires. The following MR16 lamps are recommended. Ushio Eurostar Reflekto 20w or 35w lamp with aluminized backing (specify with glass cover FG. ) By others. Sylvania Tru-Aim IR 20w or 37w lamp (specify with glass cover C. ) By others. FINISH: Electrostatically applied post powder coat module finish. Color will match luminaire unless otherwise specified. LISTING: UL/CUL. Damp location is standard. Wet location available on X4. ALIGHTS.COM 9 All precise module lengths will be determined by factory to accommodate for row length variations due to ceiling type and to allow for proper ventilation.

10 37 MARITIME WAY, OCEANSIDE, CA ALIGHTS.COM/D6