Power Units. H-Pak & V-Pak. V-Pak Low Profile. Performance Data

Size: px
Start display at page:

Download "Power Units. H-Pak & V-Pak. V-Pak Low Profile. Performance Data"

Transcription

1 ower Units H-ak & V-ak H-ak and V-ak style power units are ideal for many industrial applications. These space saving vertical style units are available with gear or piston pumps and are designed for quiet and leak-free operation. Standard arker filtration on each unit will help ensure a long service life. lso available in V-ak Low rofile. V-ak Low rofile erformance Data Model Series Tank (Gal) ump, GM 1725 RM Electric Motor H (KW) Max. ressure SI (R) H-ak 10, 20, 30, ( ) ( ) 3000 (210) V-ak 10, 20, 30, ( ) 2-20 ( ) 3000 (210) V-ak Low rofile (136.7) (5.6-30) 3000 (210) Markets Industrial resses, Shears, Test Equipment, Simulators pplications * Stainless units & other options available on request 145

2 T SFETY RELIEF D NT DJUST ower Units H-ak and V-ak E F Low rofile V-ak T VIEW G G UM CMENSTR CNTRL F UM RIME T 22.9 (.9) D FRNT VIEW * -D03 -D05 -D03 -D05 V-K C C D E Dimensions, inch (mm) Series H1/V1 H2/V2 H3/V3 H4/V4 V (267) to 16.3 (414) * 0.8 (19) 2.6 (67) 10.5 (267) to 19.3 (492) 0.8 (19) to 3.4 (85) 11.8 (298) to 19.3 (492) 0.8 (19) to 3.4 (85) 11.8 (298) to 19.3 (492) 0.8 (19) to 3.4 (85) 16.6 (451) to 24.7 (627) 1.88 (48) to 5.7 (144) C 15.4 (390) 19.4 (492) 23.6 (600) 28.9 (733) 28.6 (725) D 16.1 (410) 19.5 (495) 19.5 (495) 19.5 (495) 36.0 (914) E 19.0 (483) 22.5 (572) 22.5 (572) 22.5 (572) 39.0 (991) F 16.6 (422) 20.0 (508) 20.0 (508) 20.0 (508) 32.3 (819) G 16.6 (422) 20.0 (508) 20.0 (508) 20.0 (508) 34.6 (879) * Depending on motor option Reference dimensions consult factory if critical to application 146

3 ower Units H-ak Model rdering W Reservoir ressure ump No Motor (See Note) ** Electric Motor Manifold Reservoir Size Gallons (Liters) H1* 10 (37.9) H2 20 (75.7) H3 30 (113.6) H4 40 (151.4) *vailable up to 7.5 KW (10 H) motor only. J ressure * System ressure nly System ressure with Unloading Valve (2-Way 120VC) N.. (Energize coil to close) System ressure with Unloading Valve (2-Way 24VDC) N.. (Energize coil to close) ump Used U1*.5 (.37) C - 1 T1 1 (.75) C - 1 T3 1 (.75) C - 3 G 2 (1.5) C - 3 K 3 (2.2) C - 3 L 5 (37.5) TC - 3 M 7.5 (5.6) TC - 3 N 10 (7.5) TC (11.2) TC - 3 S 20 (14.9) TC - 3 Electric Motor Description H (KW) - RM - Frame - hase * U1 leadtime is 2 weeks Single phase electric motors are rated as follows: 115/230V, 1H, TEFC - 60 Hertz 1800 RM Three phase electric motors are rated as follows: /460V, 3H, TEFC - 60 Hertz 1800 RM Consult factory for other motor speeds (RM) and voltages. vailable with H2, H3 and H4 tanks only. ** Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent to frame size of motor to be used. S3 S5 M33 M35 M53 M55 orting lock/subplate or Manifold Type ressure and Return ort lock with Safety D03 Single Station Subplate with Safety D05 Single Station Subplate with Safety D03 Multistation arallel Circuit Manifold with Safety D05 Multistation arallel Circuit Manifold with Safety Supply/Return ort or ctuator ort Size & T orts SE-10 Str. Thr'd SE-10 Str. Thr'd ther Convertible to S3 ption Spare & T SE-10 orts Spare & T SE-12 orts Spare G ort SE-6 Spare G ort SE-6 Manifolds are mounted vertically. ottom station is number

4 ower Units H-ak Model rdering Valve *Manapak ptions and ccessories Function NF Nominal GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) F D3W1CN** D05 20 (75.7) G D3W4CN** D05 15 (56.8) T D1VW008CN*** D03 7 (26.5) W D3W8CN** D05 15 (56.8) NF Nominal GM (LM) 1 FM2DDKN D03 7 (26.5) 2 FM3DDKN D05 12 (45.4) 3 ilot perator CM2DDN D03 7 (26.5) 4 ilot perator CM3DDN D05 12 (45.4) *Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Description Units less valves wil be supplied with station cover plates installed. Circuit Symbol Function Model Technical Data 1* 2* Return Heat Return Heat RM RM H ressure Filter 15110QXRS K L R1 R2 Valve ump utlet ypass (on Heat Exch) Return Filter N.. Float Up Float Up "DT" & "C" Series C1220S65 12T10C 12 GM (45 LM) ir/il:.7 H (0.52 kw), 7 GM (26.5 LM) kw Motors only ir/il: 1.5 H (1.1 kw), 7 GM (26.5 LM) kw Motors only Microglass II Element, Vis. Ind SI (3.49 bar) ypass - 4 SI (0.27 bar), 7 GM (26.5 LM) 5 SI (0.34 bar) Cracking ressure 25 SI (1.72 bar) 15 GM (56.8 LM) (65 SI) 4.5 bar Cracking ressure Cellulose Element, Ind. Gage - 15 SI (1.03 bar) ypass Low Level and/or 65 C (149 F) (N..) Low Level and/or 65 C (149 F) (N.C.) *Heat rejection based on flow given with a 40 F differential between transfer medium. 148

5 ower Units V-ak Model rdering R Reduced W Reservoir ressure ump ump No Motor (See Note) ** Electric Motor Manifold Reservoir Size Gallons (Liters) V1* 10 (37.9) V2 20 (75.7) V3 30 (113.6) V4 40 (151.4) *vailable up to 10 H (7.5 kw) motor only. J C CJ D DJ F ressure Single ressure Remote Compensator Single ressure Remote Compensator with Low ressure Standby Single ressure Remote Compensator with Low ressure Standby, 24 VDC i-ressure Remote Compensator i-ressure Remote Compensator, 24VDC i-ressure Remote Compensator with Low ressure Standby i-ressure Remote Compensator with Low ressure Standby, 24VDC rovision for Customer Supplied Remote H** Horsepower Limiting *_SE-6 sense port line will be supplied in topplate. ** Horsepower setting will be at max. flow & pressure obtainable with motor selected. Lead time is four weeks for shaded items. ump RM ump Std. Remote Compensator Load Sense ump Used and Description 7 7 GM (29.5 LM) V16 - Std. Remote Compensator * Specify in GM Destroked Max. Volume 2 GM Min GM (59 LM) V33 - Std. Remote Compensator ** Specify in GM Destroked Max. Volume 8 GM Min. *Unless otherwise specified, units are shipped at max. flow rate 7.8 GM (29.5 LM) at 1800 RM. When reduced flow setting is required, specify pump setting in.5 GM (1.9 LM) increments. Example: 5, 5.5, 6, 6.5 with a 2 GM (7.6 LM) minimum flow. **Unless otherwise specified, units are shipped at max. flow rate 15.6 GM (59 LM) at 1800 RM. When reduced flow setting is required, specify pump setting in.5 GM (1.9 LM) increments. Example: 11, 11.5, 12, 12.5 with a 8 GM (30.3 LM) minimum flow. Electric Motor Description H (KW) - RM - Frame - hase G 2 (1.5) C - 3 K 3 (2.2) C - 3 L 5 (37.5) TC - 3 M 7.5 (5.6) TC - 3 N 10 (7.5) TC (11.2) TC - 3 S 20 (14.9) TC - 3 Electric motors are /460V, 60 Hz 3H 1800 RM TEFC. Consult factory for other motor speeds (RM) and voltages. vailable with V2, V3 and V4 tanks only. ** Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent to frame size of motor to be used. S3 S5 M33 M35 M53 M55 orting lock/subplate or Manifold Type ressure and Return ort lock with Safety D03 Single Station Subplate with Safety D05 Single Station Subplate with Safety D03 Multistation arallel Circuit Manifold with Safety D05 Multistation arallel Circuit Manifold with Safety Supply/Return ort or ctuator ort Size & T orts SE-10 Str. Thr'd SE-10 Str. Thr'd Manifolds are mounted vertically. ottom station is number 1. ther Convertible to S3 ption Spare & T SE-10 orts Spare & T SE-12 orts Spare G ort SE-6 Spare G ort SE-6 Example: V*12**-- = Std. ump Destroked to 12 GM (45.4 LM) V*11.5**-- = Load Sense ump Destroked to 11.5 GM (43.5 LM) 149

6 ower Units V-ak Model rdering continued on next page Valve *Manapak ptions and ccessories Valve Model Manapak Function ilot perator ilot perator NF Nominal GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) F D3W1CN** D05 20 (75.7) G D3W4CN** D05 15 (56.8) Units less valves wil be supplied with station cover plates installed. NF Nominal GM (LM) FM2DDKN D03 7 (26.5) FM3DDKN D05 12 (45.4) CM2DDN D03 7 (26.5) CM3DDN D05 12 (45.4) *Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Description 1* 2* ptions and ccessories Function Model Technical Data ump Case Heat Return Heat Return Heat RM RM RM H ressure Filter 15110QXRS K L Valve ump utlet ypass (on Heat Exch) "DT" & "C" Series C1220S65 N Return Filter 40CN110 R1 R2 Return Filter N.. Float Up Float Up 12T10C 12 GM (45 LM) ir/il: 0.7 H (0.52 kw), GM (1.9 LM) 2-15 H ( kw) Motors ir/il: 0.7 H (0.52 kw), 7 GM (26.5 LM) 2-5 H ( kw) Motors only ir/il: 1.5 H (1.1 kw), 7 GM (26.5 LM) H ( kw) Motors only Microglass II Element, Vis. Ind SI (3.49 bar) ypass - 4 SI (0.27 bar), 7 GM (26.5 LM) 5 SI (0.34 bar) Cracking ressure 25 SI (1.72 bar) 15 GM (56.8 LM) (65 SI) 4.5 bar Cracking ressure Microglass II Element, Visual 25 SI (1.72 bar) Indicator 3 SI (0.21 bar) 7 GM (26.5 LM) Cellulose Element, Ind. Gage - 15 SI (1.03 bar) ypass Low Level and/or 65 C (149 F) (N..) Low Level and/or 65 C (149 F) (N.C.) *Heat rejection based on flow given with a 40 F differential between transfer medium. 150

7 ower Units V-ak Model rdering V8 R Reduced W Reservoir Size 80 Gallons (302.8 Liters) ressure ump ump No Motor (See Note) ** Electric Motor Manifold J C CJ D DJ F ressure Single ressure Remote Compensator Single ressure Remote Compensator with Low ressure Standby Single ressure Remote Compensator with Low ressure Standby, 24 VDC i-ressure Remote Compensator i-ressure Remote Compensator, 24VDC i-ressure Remote Compensator with Low ressure Standby i-ressure Remote Compensator with Low ressure Standby, 24VDC rovision for Customer Supplied Remote Std. Remote Compensator Load Sense NTE: 1. Manifolds are mounted vertically. ottom station is number M5-3 and 5 station available. M8-2 station available. ump *Unless otherwise specified, a SE-6 37 flared port will be supplied for customer connection. **Consult factory for horsepower and hi-lo pump control options. Lead time is four weeks. ump RM ump Used and Description GM (59 LM) V33 - Std. Remote Compensator GM (87 LM) V48 - Std. Remote Compensator GM (137 LM) V76 - Std. Remote Compensator * Specify in GM Destroked (Reduced) *Unless otherwise specified, units are shipped at max. flow rate (GM) at 1800 RM. When reduced flow setting is required, Reduced flows from 22.5 to 8.0 GM (85.2 to 30.3 LM), specify in 0.5 GM increments. Reduced flows from 35.0 to 24.0 GM (132.5 to 90.8 LM), specify in 1.0 GM (3.8 LM) increments. Example: V*9.5**-- V*31**-- = V33 ump destroked to 9.5 GM (36.0 LM) = V76 Load Sense ump destroked to 31.0 GM (177.3 LM) M N S Q R V Electric Motor Description H (kw) - RM - Frame - Type 7.5 (5.6) TC - TEFC 10 (7.5) TC - TEFC 15 (11.2) TC - TEFC 20 (14.9) TC - TEFC 25 (18.6) TC - TEFC 30 (22.4) T - TEFC 40 (29.8) T - TEFC Electric motors are 230/460V, 60 Hz 3H. Consult factory for other motor speeds (RM) and voltages. **Use W prefix when no motor is required on unit. When ordering, W must be followed by motor model code equivalent to frame size of motor to be used. Example: V815WM*** = L (80 gal) reservoir, std V33 unit to accept a 7.5 H (5.6KW)/213TC C-face frame motor. S5 orting lock/subplate or Manifold Type ressure and Return ort lock with Safety D05 Single Station Subplate with Safety D05 Multistation arallel Circuit Manifold with Safety M5* (2) Relief and ump Compensator M82 (3) D08 Two arallel Circuit Manifold with Safety Relief and ump Compensator Supply/Return ort or ctuator ort Size ort SE-16 T ort SE-20 SE-10 Str. Thr'd SE-16 Str. Thr'd ther None None None Y ort SE-8 Str. Thr'd *When ordering Multi-Station Manifolds, the number of stations must be specified. If valves are to be mounted, specify the valves and sequence, if the model code exceeds 25 digits, call factory. Example: V815QM53C1 Example: V815QM5511CC 3 Station D05 Manifold 5-Station D05 Manifold Station #1: Station #1: 1 Station #2: C Station #3: 1 Station #2: 1 Station #3: C Station #4: Station #5: C 151

8 ower Units V-ak Model rdering Valve *Manapak ptions and ccessories Valve NF Nominal GM (LM) D1VW001CN*** D03 7 (26.5) C D1VW004CN*** D03 7 (26.5) Description 1 3 Manapak Function ilot perator NF FM2DDKN D03 7 (26.5) CM2DDN D03 7 (26.5) *Manapak valves mounted in order of callout. First valve will be nearest DCV; last valve will be on manifold. Nominal GM (LM) * ptions and ccessories Function Model Technical Data Continuous ump Case Cooling Continuous ump Case Cooling C* Filter/Cooling Loop RM RM CC H 40CN205Q H ressure Filter 210QM250NN1 ir/il: Max. il 4.5 GM (17 LM), 0.8 H (0.6 kw) Heat Rejection ir/il: Max. il 4.5 GM (17 LM) 1.5 H (1.1 kw) Heat Rejection ir il w/1 H Motor: il 4.5 GM (17 LM), 4.5 H (3.3 kw) Heat Rejection 10 Micron Microglass II Dual Element, Mechanical Indicator K Valve ump utlet D1-2 5 SI (0.3 bar) Cracking ressure L ypass C2020S65 65 SI (4.6 bar) Cracking ressure N Return Filter 40CN210Q 10 Micron Microglass II Dual Element, Mechanical Indicator** (8 SID) QS Return Filter 80CN110QE2GS Micron Microglass II Single Element Electrical Indicator (25 SI) R1 R2 N.. Float Up N.C. Float Up Low Level and/or 65 C (149 F) (N..) Low Level and/or 65 C (149 F) (N.C.) *Heat rejection data is based on 100 SSU oil leaving the cooler 22 C (72 F) higher than the ambient air temperature used for cooling. ption available from 7.5 H (0.6 KW) thru 25 H (18.5 KW). ption C not available with option or. **ased on max. 36 GM (136 LM) w/150 SUS oil. 152

9

Power Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial

Power Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial Power Units Page (M) = Mobile (I) = Industrial () = Mobile & Industrial (I) 143-144 (I) 145-152 (I) 145-152 (I) 145-152 Power Units (Industrial) D-Pak 5 Gallon D-Pak style power units are ideal for many

More information

Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series

Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US

More information

Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: July 01,

Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: July 01, aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US

More information

Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: Mar 31,

Hydraulic Power Units D, H, V-Pak and V-Pak Low Profile Series. HY CD/US Effective: Mar 31, Hydraulic ower Units D, H, V-ak and V-ak Low rofile Series HY28-2661-CD/US Effective: Mar 31, 2016 WRNING - USER RESONSIILIY FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS DESCRIED HEREIN OR RELED

More information

Hydraulic Power Units

Hydraulic Power Units Catalog HY13-1552-001/N,EU Vertical ower Units Volume Control Hydraulic ower Units D, H and V-ak Series Catalog 2600-500-1/US 15 arker Hannifin Corporation Hydraulic ump/motor Division Greeneville, ennessee

More information

Hydraulic Power Units

Hydraulic Power Units Hydraulic ower Units D, H and V-ak Series Catalog 26-5-1/US Introduction Vertical ower Units Series D, H, V-aks Quick Reference Data Chart ump ank Size ump Flow Electrical Maximum * Model No. allon (Liters)

More information

Motors & Pumps- Hydraulic Pumps, Motors & Power Units

Motors & Pumps- Hydraulic Pumps, Motors & Power Units - Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold

More information

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or

More information

D03, D05 & D08 SERIES

D03, D05 & D08 SERIES INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged

More information

ZE3 & ZE4 Electric 1 & 1 1/2 HP Pump Series

ZE3 & ZE4 Electric 1 & 1 1/2 HP Pump Series ZE3 & ZE4 Electric 1 & 1 1/2 H ump Hydraulic echnology Worldwide Shown from left to right: ZE334M-K, ZE411D-FHR he New Standard for Industrial pplications, Z-Class ll models in the chart below are the

More information

Directional Control Valves. Application. Features. Operation

Directional Control Valves. Application. Features. Operation Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or

More information

Directional Control Valves. Application. Features. Operation

Directional Control Valves. Application. Features. Operation Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or

More information

Directional Control Valves. Application. Features. Operation.

Directional Control Valves. Application. Features. Operation. Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are

More information

550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm)

550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) 19 Power Unit Features We are pleased to introduce our new C hydraulic power units. The combines the features and benefits our customers and markets

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves

More information

Directional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style

Directional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which

More information

MF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST CATALOG APRIL 2013

MF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST CATALOG APRIL 2013 MF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST CATALOG APRIL 2013 MF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST NOTE: Asterisk (*) in front of a part number indicates a component required to construct the

More information

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform

More information

03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S.

03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S. 3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic

More information

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional

More information

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8. R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to

More information

Direct Operated Proportional DC Valves

Direct Operated Proportional DC Valves echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable

More information

Hydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire

Hydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are

More information

Functional Symbols and Application Notes

Functional Symbols and Application Notes Functional Symbols and pplication Notes Model Types KHDG5V Shown Simplified symbol Model Types KHDG5V Shown K()FDG5V symbols identical, but omit pilot-stage LVDTs Simplified symbol T T Detailed symbol

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances

More information

Bankable Control Valves

Bankable Control Valves Hydraulics ankable Control Valves Catalog 3123/US Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and

More information

Filtration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75

Filtration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75 ccumulators 19 ccumulator ischarge Valve 3 Specifications Valve Function ccumulator ischarge Mounting Inline not restricted Fluid Mineral-oil or fluid HF / B / C / Viscosity 6... 25 SUS (1... 5 cst) Fluid-temperature

More information

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style

Operation. D1VW Solenoid Operated Plug-In Conduit Box Style Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform

More information

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:

D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax: GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,

More information

5 Port Solenoid Valve

5 Port Solenoid Valve Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-

More information

SECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES

SECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he

More information

5 Port Solenoid Valve

5 Port Solenoid Valve ort Solenoid Valve 7-6/7-8 Series Metal Seal Rubber Seal ISO Standard Size /Size 7-8/Single unit. Conforms to ISO standard /I Interface conforms to ISO standard Size (7-6) and Size (7-8). Outstanding high

More information

Operation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style

Operation. D3W Solenoid Operated Conduit Box Style. D3W Solenoid Operated Hirschmann (DIN) Style Catalog HY14-252/US Introduction pplication arker D3 Series hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3 position. hey are manifold mounted

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US LH Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US echnical Information General Description Series D1VW directional control

More information

Directional Control Valves

Directional Control Valves echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available

More information

5 Port Solenoid Valve

5 Port Solenoid Valve ort Solenoid Valve Series VQ7-6/7-8 Metal Seal Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.70 VQ7-8/Manifold.70 Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves 200--991210-N-03/09.2015 03 / 10.04 1/220 11 Sectional directional control valves HDS30 Contents 11.1 General specifications 197 11.2 Dimensional data

More information

4/5 Port Solenoid Valve

4/5 Port Solenoid Valve CT.ES8 / ort Solenoid Valve Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M.7 to M2. 앬 Flow Characteristics Series Cover (stainless

More information

2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.

2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8 to 2 1/2 NPT. Features. Construction. 4 ilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" 8210 2-AY Features ide range of pressure ratings, sizes, and resilient materials provide long service life

More information

4/5 Port Solenoid Valve

4/5 Port Solenoid Valve ubber Seal / ort Solenoid Valve Series 000 / 000 / 000 [Option] SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread

More information

Directional Control Valves

Directional Control Valves Frequently sked Questions Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It provides

More information

2 position single 2 position double. 3 position Ambient and fluid temperature ( C) Note 1) 3 position Max. operating

2 position single 2 position double. 3 position Ambient and fluid temperature ( C) Note 1) 3 position Max. operating / ort Solenoid Valve ubber Seal Series SYJ000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Specifications JIS Symbol port port (manifold) position

More information

CMF2 Series Applicable cylinder bore size: Max. ø160

CMF2 Series Applicable cylinder bore size: Max. ø160 4G/ M4G/ Individual wiring manifold ISO size 2 DIN terminal ox type 5 port pilot operated valve ISO conformed valve 2 Series pplicale cylinder ore size: Max. ø160 MN4G/ Common specifications 4G/ W4G/2

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves motion and progress 200--991210-N-03/09.2015 - - - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 Standard valves... p.101 Contents 8.1

More information

385 & 962 Series The lectroaire valve is a compact, air operated, electrically lectroaire valves can be remotely mounted for control of double acting

385 & 962 Series The lectroaire valve is a compact, air operated, electrically lectroaire valves can be remotely mounted for control of double acting Model Number Index Housing Series Type ort Variation Voltage 962 2 001 40 Series Solenoid Operated Housing Type 962 Valve less racket 972* Valve less racket 902 Valve less racket 385 Valve with racket

More information

Power Consumption. 4/5 Port Solenoid Valve. Series SYJ3000/5000/7000. With Power Saving Circuit

Power Consumption. 4/5 Port Solenoid Valve. Series SYJ3000/5000/7000. With Power Saving Circuit CT.EUS8 UK ower Consumption / ort Solenoid Valve With ower Saving Circuit Series SYJ000/000/7000 Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced

More information

Proportional Valves. Proportional Two-Stage Directional Valves

Proportional Valves. Proportional Two-Stage Directional Valves VICKERS roportional Valves roportional Two-Stage Directional Valves KHDG5V-5/7, 1 Series ressures to 3 bar ( psi) This product has been designed and tested to meet specific standards outlined in the European

More information

Rubber seal 3 Port Pilot Solenoid Valve. Specifications. Fluid Operating pressure range MPa. Internal pilot

Rubber seal 3 Port Pilot Solenoid Valve. Specifications. Fluid Operating pressure range MPa. Internal pilot ubber seal ort ilot Solenoid Valve Series SYJ00 Specifications efer to www.smcworld.com for details of products compatible with overseas standards. Body ported Base mounted Fluid Operating pressure range

More information

Power units. Hydraulic power units. hydraulic hydraulic hydraulic. hydraulic hydraulic

Power units. Hydraulic power units. hydraulic hydraulic hydraulic. hydraulic hydraulic Hydraulic power units ower units 7 HILM ower Units and Valve ackages ir/oil power units for die lifters manually operated die lifter pumps on request 7.0100.US 7.0150.US ir/oil power units for die clamp

More information

Directional control valves catalogue NVD2 - NVS3

Directional control valves catalogue NVD2 - NVS3 Directional control valves catalogue NVD - NVS Edition / roducts...... for mobile hydraulic applications Mechanical and Electric Cartridge Valves ressure control valves p max bar Counter balance valves

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................

More information

Catalog Power Unit Accessories

Catalog Power Unit Accessories Catalog Power Unit Accessories Features Continental Hydraulics offers a wide range of accessories that can be either mounted on the power unit, or purchased seperately. Everything from filters and gauges

More information

APV Load Sensing Valve

APV Load Sensing Valve www.k-fluidpower.com V Load Sensing Valve V0: V6: V 22: V 32: Max. flow: port 60 l/min 260 l/min 660 l/min 2000 l/min port / 80 l/min 50 l/min 380 l/min 800 l/min Max. pressure: port // 350 bar 420 bar

More information

VQ1000. How to Order Manifold. Kit type

VQ1000. How to Order Manifold. Kit type - - ase Mounted VQ000/000 Manifold type D-sub connector ort Solenoid Valve Flat ribbon cable Connector Serial Directional Control Valves VQ000 How to Order, Manifold Options VQ000 How to Order, Manifold

More information

Series VQZ1000/2000/3000 Single Unit

Series VQZ1000/2000/3000 Single Unit +- ase Mounted lug Lead Unit ort Solenoid Valve Series VQZ// Single Unit [Option] How to Order Valve Made to Order (For details, refer to page 7.) VQZ Series VQZ body width mm VQZ body width mm VQZ body

More information

Air Valve AIR-PILOTED VALVES

Air Valve AIR-PILOTED VALVES K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without

More information

Performance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps

Performance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps Catalog HY13-155-2/US Technical Information Series PVP 1/14 Performance Information Series PVP 1/14 Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and

More information

ISO Standard Solenoid Valve. Series VQ7-6/7-8. (Size 1) (Size 2) Conforms to ISO Standard 5599/I

ISO Standard Solenoid Valve. Series VQ7-6/7-8. (Size 1) (Size 2) Conforms to ISO Standard 5599/I ISO Standard Solenoid Valve Series VQ7-6/7-8 (Size ) (Size ) Conforms to ISO Standard /I.0- Ideal for driving cylinders up to Large flow capacity ø00 (VQ7-6, Size ) ø60 (VQ7-8, Size ) Nl/min VQ7-6: 668.

More information

Temperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)

Temperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise) Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303

More information

BST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.

BST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol. Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications

More information

Filter/Cooler Module. Advantages: RA 50127/ /12 Replaces: Model MFC3, MFN3, MNC3

Filter/Cooler Module. Advantages: RA 50127/ /12 Replaces: Model MFC3, MFN3, MNC3 Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Filter/Cooler Module RA 50127/12.11 1/12 Replaces: 03.07 Model MFC3, MFN3, MNC3 4 19 Horsepower Removal

More information

High Pressure, Subplate Mounted Directional Control Valves

High Pressure, Subplate Mounted Directional Control Valves ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple

More information

250 bar P max. Technical Features. Functional Description

250 bar P max. Technical Features. Functional Description Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations

More information

Cable Appendix. Valves. Cable Appendix. Page 16. Multi-way cables. D-sub Connector Cables. AXT100-DS Conforming to MIL-C-24308

Cable Appendix. Valves. Cable Appendix. Page 16. Multi-way cables. D-sub Connector Cables. AXT100-DS Conforming to MIL-C-24308 Cable ppendix Cable ppendix Multi-way cables The multi-pole connector cables used on SMC valves are common across several ranges. Cables are available in accordance with the MIL standard C-08 and also

More information

Catalog Power Unit Accessories

Catalog Power Unit Accessories Catalog Power Unit Accessories Features Continental Hydraulics offers a wide range of accessories that can be either mounted on the power unit, or purchased seperately. Everything from filters and gauges

More information

Modular valves DO5 (NG 10) 315 bar

Modular valves DO5 (NG 10) 315 bar Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16

More information

5 Port Solenoid Valve. High speed response type) Series. Body ported VQZ1 2 VQZ2 2 VQZ3 2 VQZ1 5 VQZ2 5 VQZ3 5. Base mounted

5 Port Solenoid Valve. High speed response type) Series. Body ported VQZ1 2 VQZ2 2 VQZ3 2 VQZ1 5 VQZ2 5 VQZ3 5. Base mounted Metal Seal ort Solenoid Valve Series // Rubber Seal.. ower consumption:. W/. W Compact, High Flow Series Valve width (mm) (Standard) (High pressure type, High speed response type) ody ported ase mounted

More information

Eaton PVM Variable Displacement Piston Pumps Vickers Product Line cc 3 ( in 3 )

Eaton PVM Variable Displacement Piston Pumps Vickers Product Line cc 3 ( in 3 ) Eaton PVM Variable Displacement Piston Pumps Vickers Product Line 18-141cc 3 (1.1-8.6in 3 ) Table of Contents M Series Variable Displacement Piston Pumps Introduction.... 3 Hydraulic System Design Calculations....

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX: SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol

More information

S21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight

S21 Series. - 1 NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories Catalog HY14-2500/US Industrial Hydraulic Valves WRNING USER RESONSIILIY FILURE OR IMROER SELECION

More information

5 Port Solenoid Valve

5 Port Solenoid Valve ort Solenoid Valve Metal Seal / Rubber Seal ower consumption:..w/..w ower consumption:. W/. W Compact, High Flow (Standard) (High pressure type, High speed response type) ody ported ase mounted Series

More information

Functional Description HU /2012. Compact Hydraulic Power Packs USMA 05. Replaces HA /2008. p max 3600 PSI (250 bar) 4.

Functional Description HU /2012. Compact Hydraulic Power Packs USMA 05. Replaces HA /2008. p max 3600 PSI (250 bar) 4. Compact Hydraulic ower acks USA 05 p max 3600 SI (250 bar) 4.5 G (17 L/min) 12/2012 Replaces HA 7211 6/2008 Compact hydraulic power packs for the use in lifting platforms, elevating tables, ramps, presses,

More information

Load-Sensing Control Block SB12

Load-Sensing Control Block SB12 Load-Sensing Control lock S E 64 386/. eplaces: E 64 386/. S-M mechanical actuation S-EM direct operated electromagnetic actuation Nominal pressure: p nom = 5 bar Flow: Q max = l/min Table of contents

More information

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>

DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN> DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.

More information

Open center control block in mono block design MO-16, 22, 32

Open center control block in mono block design MO-16, 22, 32 Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:

More information

Servo directional valve of 4-way design Type 4WS.2E

Servo directional valve of 4-way design Type 4WS.2E RE 9 83/7.3 Replaces:. Servo directional valve of 4-way design Type 4WS.E Nominal size Series X Maximum operating pressures 31 bar Maximum flow 1 L/min H//D 89/97 Overview of contents Contents age Features

More information

S21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight

S21 Series. - 2 NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight S21 Series - 2" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 1/4 Electrical Standard Housing: Encapsulated Waterproof

More information

Axial Piston Variable Pump A15VSO

Axial Piston Variable Pump A15VSO Axial iston Variable ump A15VSO RE 928/5.12 1/4 Replaces: 3.1 Data sheet Series 1 Sizes 175 to 28 Nominal pressure 35 bar Maximum pressure 42 bar Open circuit Contents Ordering code for standard program

More information

MC HYDRAULIC POWER PACK

MC HYDRAULIC POWER PACK MC HYDRAUIC OWER ACK echnical Catalogue January 2018 web edition able of contents i Introduction... 2 Endhead configuration... 3 ower pack sections... 5 Selection code... 6 Endhead overall dimensions...

More information

Portable Filter Carts Models 5MF and 10MF

Portable Filter Carts Models 5MF and 10MF s Models 5MF and 10MF 161 Applications for Parker Filter Carts Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid that

More information

RELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled

RELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled RELIEF VALVES Remote ontrol / Direct ype ilot Operated / Solenoid ontrolled Up to 5 Ma (3630 SI), 0 L /m in (06 U.S.GM) ub. E-00 Remote ontrol Relief Valves... age 3 his valve is used as a remote control

More information

Directional servo-valve in 4-way design

Directional servo-valve in 4-way design Directional servo-valve in 4-way design RE 2983/.11 Replaces: 7.3 1/ Type 4WS.2E... Size Component series X Maximum operating pressure 31 bar Maximum flow 1 l/min HD892 Type 4WSE2ED -X/...K31EV HD893 Type

More information

5.2 to 79 gpm 3000, 3600, 5000 psi

5.2 to 79 gpm 3000, 3600, 5000 psi Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview he modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates

More information

Terminal Block Box (Spring Type) SY3000/5000/7000 Series

Terminal Block Box (Spring Type) SY3000/5000/7000 Series INFORMATION 5 ort olenoid alve Terminal lock ox (pring Type) Y3000/5000/7000 eries Compact RoH Height 6.7 mm shorter (Approx. 9% reduction) Installation area of the terminal block box Reduced by approx.

More information

LMP screw pumps for delivery pressures up to 120 bar

LMP screw pumps for delivery pressures up to 120 bar 1 64 EN LM screw pumps for delivery pressures up to 12 bar Technical data Delivery rate max. = 67 l/min Delivery pressure p max. = 12 bar Temperature range C to +8 C Kinematic viscosity 1 to 2 mm 2 /s

More information

2/2- or 3/2-way- Rocker Solenoid Valve

2/2- or 3/2-way- Rocker Solenoid Valve 2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug

More information

CS-SCB Sander Control Block Manual

CS-SCB Sander Control Block Manual Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service CS-SCB Sander Control Block Manual The Drive & Control Company Copyright 1996 Bosch Rexroth Canada All

More information

ENGINEERING DATA. Quick Reference Chart. Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted. Industrial Hydraulics

ENGINEERING DATA. Quick Reference Chart. Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted. Industrial Hydraulics ENGINEERING DATA Industrial Hydraulics Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted SYMBOL Quick Reference Chart GPM @ MAXIMUM PRESSURE THEORETICAL INPUT HP MODEL 100 PSI &

More information

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way

More information

I N D E X. VQ1000 How to Order, Manifold Options VQ2000 How to Order, Manifold Options VQ1000/2000 Model, Standard/Manifold Specifications

I N D E X. VQ1000 How to Order, Manifold Options VQ2000 How to Order, Manifold Options VQ1000/2000 Model, Standard/Manifold Specifications I N D E VQ000 How to Order, Manifold Options VQ000 How to Order, Manifold Options VQ000/000 Model, Standard/Manifold Specifications VQ000/000 F (D-sub connector) VQ000/000 (Flat ribbon cable) VQ000/000

More information

Series PHP10 Variable Volume, Piston Pumps

Series PHP10 Variable Volume, Piston Pumps Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable

More information