Assembling an AR-15 Parts CheckList:
|
|
- Pearl Owens
- 6 years ago
- Views:
Transcription
1 Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts A, A2 & A3 sights BARREL COMPONENTS BOLT & BOLT CARRIER COMPONENTS LOWER RECEIVER COMMON PARTS Buttstock components repair & assembly tools accessories
2 Assembling an AR-5 Parts CheckList: Upper Receiver Common Parts CONTACT/PROJECT: DATE: PAGE of. Select () of the following UPPER RECEIVER options: Complete Upper Receiver with Barrel, or Complete Upper Receiver without Barrel (Order barrel separately), or Stripped Upper Receiver (Order barrel separately). 2. If ordering a STRIPPED UPPER RECEIVER, then order either 2A, 2B, or 2C: 2A) Order () of the following COMPLETE UPPER RECEIVER PARTS KITS, or Complete Upper Receiver Parts Kit 2B) Order ( each) of the following COMPLETE SUBASSEMBLIES, or Ejection Port Cover Kit Forward Assist Kit Charging Handle Kit 2C) Order ( each) of the following individual parts. Ejection Port Cover Ejection Port Cover Spring Ejection Port Cover Pin Ejection Hinge Pin Snap Ring Forward Assist Button Pawl Pin Forward Assist Pawl Detent Forward Assist Pawl Detent Spring Forward Assist Pawl Forward Assist Spring Forward Assist Retainer Pin Charging Handle Charging Handle Latch Charging Handle Spring Charging Handle Spring Pin
3 Assembling an AR-5 Parts Check List: A, A2 & A3 sights CONTACT/PROJECT: DATE: PAGE of. If Ordering an A REAR SIGHT, then order either A or B: A) Order () of the following A REAR SIGHT KITS, or Complete A Sight Kit B) Order ( each) of the following individual parts. Sight Windage Drum Base Spring Pin Sight Detent Sight Detent Spring Rear Flat Sight Spring Sight Aperture Sight Windage Screw C) If an A Front Sight is desired, Order () of the following COMPLETE A FRONT SIGHTS: A Front Sight Post w/5 detents and round post 2. If Ordering an A2 REAR SIGHT, then order either 2A or 2B and 2C: 2A) Order () of the following COMPLETE A2 SIGHT KITS, or Complete A2 Sight Kit 2B) Order ( each) of the following individual parts and 2C. Windage Knob Windage Pin Sight Base Windage Screw Rear Sight Spring Rear Sight Base Spring Pin Elevation Knob Elevation Wheel Elevation Spring 2 Index Screw
4 Assembling an AR-5 Parts CheckList: A, A2 & A3 sights CONTINUED A, A2, & A3 Sights Continued 2C) Order (3 each) of the following individual parts. Index Springs 3 Sight Balls 3 2D) If an A2 Front Sight is desired, order () of the following COMPLETE A2 FRONT SIGHTS: A2 Front Sight Post w/4 detents and square post 3. If ordering sights for a flattop receiver: 3A) Order from the following SIGHT options: Optics Spare Batteries Rings Flattop Riser Mount Carry Handle with Rear Sight Lens Covers Detachable Rear Sight 3B) If a Front Sight is desired, order () of the following FRONT SIGHTS: Part Product Name & Description Stock Number Qty Price Ordered Received Front Sight
5 Assembling an AR-5 Parts CheckList: BARREL COMPONENTS CONTACT/PROJECT: DATE: PAGE of. Select () of the following BARREL options: Barrel with Mil-Spec front sight housing installed Barrel without Mil-Spec front sight housing installed 2. If a free float handguard is desired: Choose ( each) of the following components: Free Float Handguard Gas Tube of proper length Gas Block if not supplied with barrel Gas Tube Roll Pin Front Sight optional Sling Swivel optional Flash Hider or Compensator if not supplied with barrel Lock Washer, Peel Washer, Locknut, or Crush Washer if required 3. If a 2-piece handguard is desired, order either 3A or 3B and 3C. 3A) Order ( each) of the COMPLETE DELTA RING ASSEMBLY, or Delta Ring Assembly, Complete 3B) Order ( each) of the following individual DELTA RING components and 3C. Slip Ring Spring Assembly Handguard Slip Ring Handguard Retainer Ring 3C) Choose ( each or as otherwise indicated) of the following components: Handguard Cap if not supplied with barrel 2-Piece Handguard Gas Tube of proper length Gas Tube Pin
6 Assembling an AR-5 Parts CheckList: BARREL COMPONENTS continued Choose ( each or as otherwise indicated) of the following components: Gas Block or Front Sight Housing if not supplied with barrel Taper Pins if installing a Front Sight Housing (Order 2) 2 Forward Sling Swivel Forward Sling Swivel Pin Flash Hider or Compensator if not supplied with barrel and barrel is threaded Lock Washer, Peel Washer, Locknut, or Crush Washer if required
7 Assembling an AR-5 Parts CheckList: BOLT & BOLT CARRIER COMPONENTS CONTACT/PROJECT: DATE: PAGE of. If ordering a BOLT & CARRIER, order either A or B or C A) Order () of the following Preassembled Bolt/Carrier GroUP, or Preassembled Bolt/Carrier Group B) Order (each) of the following individual components, or C. Bolt Assembly Carrier Assembly C) Order ( each unless otherwise indicated) of the following individual components. Bolt, Stripped Ejector Ejector Spring Ejector Roll Pin Extractor Extractor Pin Extractor Spring Extractor Buffer, Black Gas Ring (Order 3) or -Piece Gas Ring 3 Bolt Carrier, Stripped Bolt Carrier Cam Pin Bolt Carrier Key Bolt Carrier Key Screws (Order 2) 2 Firing Pin Firing Pin Retainer Pin
8 Assembling an AR-5 Parts CheckList: LOWER RECEIVER COMMON PARTS CONTACT/PROJECT: DATE: PAGE of. Select one () of the following LOWER RECEIVER options: Complete Lower Receiver with Buttstock Complete Lower Receiver without Buttstock Don t forget the buttstock Stripped Lower Receiver 2. If ordering a STRIPPED LOWER RECEIVER, then order either 2A, 2B, or 2C: 2A) Order () of the following COMPLETE LOWER RECEIVER PARTS KITS, or Complete Lower Receiver Parts Kit 2B) Order ( each) of the following COMPLETE SUBASSEMBLIES, or Trigger Kit of correct pin size,.54 or.7 Bolt Catch Kit Magazine Catch Kit Pistol Grip Kit Pivot Pin Kit of correct pin size,.250 or.32 Take Down Pin Kit Fire Control (Safety) Selector Kit Triggerguard Kit Buffer Retainer Buffer Retainer Spring 2C) Order ( each unless otherwise indicated) of the following individual parts. Hammer/Trigger Pin of correct size,.54 or.7 (Order 2) 2 Trigger Trigger Spring Disconnector Disconnector Spring Hammer With J Hook Spring Bolt Catch Spring Bolt Catch Plunger Bolt Catch
9 Assembling an AR-5 Parts CheckList: LOWER RECEIVER COMMON parts CONTINUED 2C Continued) Order ( each unless otherwise indicated) of the following individual parts. Bolt Catch Pin Magazine Catch Magazine Release Button Spring Magazine Catch Button Pistol Grip Pistol Grip Lock Washer Pistol Grip Screw Pin Detents (Order 2) 2 Pin Detent Springs (Order 2) 2 Pivot Pin of correct size,.54 or.7 Take Down Pin Fire Control Selector Fire Control Spring Fire Control Detent Triggerguard Triggerguard Pivot Pin Triggerguard Pin Triggerguard Spring Triggerguard Plunger Buffer Retainer Buffer Retainer Spring
10 Assembling an AR-5 Parts CheckList: Buttstock components CONTACT/PROJECT: DATE: PAGE of. If a COLLAPISBLE BUTTSTOCK is desired, order either A or B: A) Order () of the following COMPLETE COLLAPSIBLE BUTTSTOCK KITS, or Collapsible Buttstock Kit, Complete B) Order (each) of the following COLLAPSIBLE BUTTSTOCK individual components: Collapsible Buttstock, Only Buffer Assembly of correct type for stock and caliber Lower Receiver Extension Tube of correct length and diameter Action Spring of the correct length for stock type Receiver End Plate Receiver Extension Nut Action Spring of the correct length for stock type Receiver End Plate Receiver Extension Nut C) These parts are typically preassembled on the Collapsible Buttstock, but be sure they are included when ordering. Release Lever Lock Pin Nut Lock Pin Retainer Roll Pin Lock Release Lever Pin Spring Lock Release Lever Pin Sling Swivel (Not required for CAR-5 Stocks) Sling Swivel Screw (Not required for CAR-5 Stocks)
11 Assembling an AR-5 Parts CheckList: Buttstock components continued 2. If a FIXED BUTTSTOCK is desired, order either 2A or 2B: 2A) Order () of the following COMPLETE FIXED BUTTSTOCK KITS, or Fixed Buttstock Kit, Complete 2B) Order (each) of the following FIXED BUTTSTOCK individual components: Fixed Buttstock only Buffer Assembly of correct type for stock and caliber Lower Receiver Extension Tube of correct length and diameter Action Spring of the correct length for stock type Buttstock Spacer For A2 stocks only 2C) These parts are typically preassembled on the Fixed Buttstock, but be sure they are included when ordering. Buttstock Screw (A- or A-2) Butt Stock Door Butt Stock Door Hinge Door Hinge Pin Butt Stock Door Plunger Butt Stock Door Plunger Retainer Pin Butt Stock Door Plunger Spring Sling Swivel Sling Swivel Screw
12 Assembling an AR-5 Parts CheckList: repair & assembly tools CONTACT/PROJECT: DATE: PAGE of Common Tools for Repair & Assembly Ballpeen Hammer 4 to 8 oz Nylon/Brass Hammer Bit Driver Screwdriver with 3 ½ shaft Torx Bit Set Hex Bit Set Flat Head bits & Philips Bits Needle Nose Pliers Lower Receiver Vise Block Upper Receiver Vise Block Set Rifle Bench Block Bench Mat Bench Vise Padded Vise Jaws Set of Roll Pin Holders in Number,2, 3, & 4 Set of Roll Pin Punches in Number,2, 3, & 4 Barrel Nut Tool or Combination Armorer s Wrench Buttstock Tool (Collapsible Stock only) Handguard Removal Tool Barrel Specific Tools ½ drive Torque Wrench (30 ft lbs to 50 ft lbs) 3/32 taper starter punch /8 flat punch to peen the swivel rivet Staking punch to start the peen on the swivel rivet Sight Adjustment Tool for your type of sight (A-/A-2)
13 Assembling an AR-5 Parts CheckList: REPAIR & ASSEMBLY tools ConTinued Barrel Specific Tools continued Gas Tube Alignment Pin Snap Ring Pliers Breaker Bar Strap Wrench Upper Receiver Specific Tools Headspace Gauge Set Field/Go/ No-go Rear Sight Elevation Spring Tool for assembling the A2 sight Sight Adjustment Tool for your type of sight Ejector Removal Tool Lower Receiver Specific Tools.5 diameter punch for locating trigger parts & installation Pivot Pin Detent Installation Tool Bolt Catch Pin Punch AR-5 Hammer Trigger Jig Hammer Trigger Drop Block for adjusting the hammer & trigger
14 Assembling an AR-5 Parts CheckList: accessories Select from the following accessories: Optics Primary Optics Secondary Spare Batteries for Optics Clamp-On Sights Sling Bipod Weapon Light Remote Switch for Weapon Light Spare Batteries for Weapon Light Vertical Grip Magazines Cleaning Kit Solvent Oil Patches Chamber Brush Bore Brush Accu-Wedge
Standard Direct Impingement AR-15 Parts Check List
Standard Direct Impingement AR-15 s List UPPER RECEIVER COMMON PARTS 1. Select (1) of the following UPPER RECEIVER options: Complete Upper Receiver with Barrel, or Complete Upper Receiver Without Barrel
More informationQ'ty needed for quotes. No Item No. Description Image. Barrel Parts. Handguard Snap Ring Material: SK5 1 MS Weld Spring Material: 1075
Barrel Parts 1 MS16626-1137 2 8448555 3 8448712 4 9349054BN-01 5 9349054BE 6 A01-0036 7 9349054BIP 8 8448567 9 G02-0001 10 1005-914-3504 11 G02-0002 12 9349054FSHA 13 MS16562-106 14 8448571 15 8448697
More informationQ'ty needed for quotes. No Item No. Description Image. Barrel Parts. Handguard Snap Ring Material: SK5 1 MS Weld Spring Material: 1075
Barrel Parts 1 MS16626-1137 2 8448555 3 8448712 4 9349054BN-01 5 9349054BE 6 A01-0036 7 9349054BIP 8 8448567 9 G02-0001 10 1005-914-3504 11 G02-0002 12 9349054FSHA 13 MS16562-106 14 8448571 15 8448697
More informationCopyright 2013 by Modern Gun School Modern Schools of America P.O. Box 846 St. Albans, VT
Copyright 2013 by Modern Gun School Modern Schools of America P.O. Box 846 St. Albans, VT 05478-0846 Printed in the United States of America. All rights reserved. Modern Gun School Introduction Congratulations
More informationCOMPONENT DIAGRAM : LMG ENHANCED
KA002-05U KA002-06U KA002-02U KA002-37U KA002-37U KA002-33U KA002-10U KA002-30U KA002-36U KA002-54U KA002-55U KA002-03U KA002-46U KA002-28U KA002-27U KA002-17U KA002-32A KA002-29A KA012-01U KA012-02U KA012-03U
More informationKJWORKS KJ-M4V2 MANUAL
KJWORKS KJ-M4V MANUAL EYE PROTECTION DEVICE MUST BE EQUIPPED DO NOT LOAD ANYTHING BUT BB BULLETS. DO NOT LOOK THROUGH THE BARREL PLEASE SHOOT IN SAFE PLACE WARNING: BEFORE USAGE, THE INSTRUCTION MUSE BE
More informationKJWORKS KJ-M4V3 MANUAL
KJWORKS KJ-M4V3 MANUAL 050930 WARNING: BEFORE USAGE, THE INSTRUCTION MUSE BE READ. THANK YOU FOR PURCHASING. THE FOLLOWING ATTENTION POINTS AND INSTRUCTIONS MUST BE READ. SHOOTING WITHOUT CAUTION OR USED
More informationROCK RIVER ARMS. All prices, configurations and specifications subject to change without notice.
JUNE 2004 ROCK RIVER ARMS Table of Contents RRA Custom 1911 Pistols, Parts & Customizing Services.............. Pages 3 / 6 RRA Custom Carbines & Rifles.................................... Pages 7 / 12
More informationCZ-USA SHOTGUN INSTRUCTION MANUAL CZ-USA
CZ-USA SHOTGUN INSTRUCTION MANUAL CZ-USA SAFETY INSTRUCTIONS Over & Under Shotguns ASSEMBLY Over & Under Shotguns USAGE - Detach the forearm from the barrel. CHOKE TUBES 3 Over & Under Shotguns USAGE ASSEMBLY
More informationM14 Rifle Item Stock Numbers
M14 Rifle Item Stock Numbers This document is derived from the 02/04/07 draft of the Third Edition of M14 Rifle History and Development by Lee Emerson copyright 2007. Permission is granted to reproduce
More informationAR HINGE FOLDING STOCK ADAPTER
AR HINGE FOLDING STOCK ADAPTER User s Manual SYLVAN ARMS AR HINGE FOLDING STOCK ADAPTER This product is use for use with buffer adaptable platforms including calibers from 5.56 to.308. www.sylvanarms.com
More information2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE
2014 PRODUCT CATALOG DPMS GII DESIGNED II DOMINATE THE FUTURE OF THE MSR HAS BEEN REDEFINED. DPMS GII HAS ARRIVED. THE LIGHTEST, MOST RELIABLE, TECHNICALLY ADVANCED.308 MSR. DESIGNED II DOMINATE. DPMS
More informationSU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355
SU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355 384 357 402 137 103 365 438 367 367 434 294 480 481 202 103 C-BARREL 137 GAS BLOCK FRONT SIGHT 202 RECEIVER RECEIVER SCREW 294 O'RING 355
More informationBROWNING.50 M2 MACHINE GUN, ASSEMBLY
Parts Catalog BROWNING.50 M2 MACHINE GUN, ASSEMBLY Page 1 DEC 2016 PCOOWM2HB phone: 440.285.3481 fax: 440.286.8571 web: ohioordnanceworks.com OOW M2 Configurations M2 HB SKU: 7265636 M2 QCB SKU: M2A1-100E
More information2014 Lancer Systems all rights reserved
2014 Lancer Systems all rights reserved PROPRIETARY NOTICE: This contains Lancer Systems confidential, proprietary and/or competition sensitive data. ITAR NOTICE: Warning This document contains technical
More information*ARMY TM &P AIR FORCE TO 11W NAVY SW370-BU-MMI-010 TECHNICAL MANUAL
*ARMY TM 9-1005-319-23&P AIR FORCE TO 11W3-5-5-42 NAVY SW370-BU-MMI-010 TECHNICAL MANUAL FIELD MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR RIFLE, 5.56MM, M16A2 W/E, PN 9349000
More informationService Tools. Service and Repair Manual Model 900/950/990 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO.
12 1 3 2 4 5 8 10 6 7 9 11 14 24 12 13 17 22 29 18 23 25 19 26 15 20 27 21 16 22 33 37 38 32 31 36 30 34 35 40 41 42 43 ITEM PART NO. DESCRIPTION 1 9170 0231 30 LONG ALLEN KEY 2 9170 0737 20 3/32 PIN PUNCH
More informationA WORD FROM THE PRESIDENT. AR stands for ArmaLite: Accept no substitutes.
Index AR-50...2 AR-30...2 AR-10...3-7 National Match...4 SuperSASS...5 (T) Rifles...5 A4 SPR and SPR Carbine...6 A2 Rifle and Carbine...7 M-15...8-13 SPR Mod 1...8-9 National Match...10 A4 SPR and SPR
More informationARES Defense Systems, Inc Retail Price List - Page 1 ARES-15 MCR (MISSION CONFIGURABLE RIFLE) (SEMI-AUTO)
CALIBER MAG or BELT- FEED CONTOUR LENGTH GAS STOCK REGULATOR FEED TRAY HANDGUARD MCR-013 5.56 MM Belt Feed Heavy 16.25" ADJ CARBINE SP SIGHTS MIL-STD 1913 $4,450.00 $4,075.00 MCR-014 5.56 MM Belt Feed
More informationDS, GS, AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS RIFLE CALIBER.30, AUTOMATIC:
D E P A R T M E N T O F T H E A R M Y T E C H N I C A L M A N U A L DS, GS, AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS RIFLE CALIBER.30, AUTOMATIC: BROWNING, M1918A2, W/E
More informationMICRO WHEN SPEED AND ACCURACY MATTER USER MANUAL
WHEN SPEED AND ACCURACY MATTER USER MANUAL FEATURES AND ADVANTAGES The most cost effective conversion kit. The quickest conversion kit assembly on the market today. Toolless installation and no pistol
More informationARES Defense Systems, Inc Independence Day Freedom Sale Price List ARES-15 MCR BELT-FED RIFLES
ARES-15 MCR BELT-FED RIFLES HANDGUARD SALE MCR-013 5.56 MM Heavy, Chrome-Lined 16.25" ADJ CARBINE SP SIGHTS MIL-STD 1913 $4,450.00 $4,075.00 MCR-014 5.56 MM Heavy, Chrome-Lined 16.25" ADJ CARBINE NIT SIGHTS
More informationK&T Saw Shop or
11-600013U PRO 10-10 04/75 to 04/77 IPL 92379A-R1 Page 1 of 18 Accessories 11-600013U PRO 10-10 04/75 to 04/77 IPL 92379A-R1 Page 2 of 18 Accessories 91090 Bar-16" Sprocket Nose 86979N Chain Asy-16" PM370
More informationDOLARIAN CAPITAL, INC.
New, Used & Refurbished Weapon Systems www.dolarian.com AMMUNITION HIGH STNADARD A LL RIFLE MANUFACTURED NEW TO U NITED S TATES M ILITARY S PECIFICATIONS COMMANDO 7.5 Barrel Flat Top, 5.56mm NATO, Collapsing
More information408, 408A, 410, 410A, 512 SERIES
OWNER'S MANUAL OWNER'S MANUAL 408, 408A, 410, 410A, 512 SERIES 408, 408A, 410, 410A, 512 SERIES INSTALLATION, OPERATION, MAINTENANCE & PARTS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including
More information1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns
STEERING COLUMN 1989 STEERING Jeep Steering Columns DESCRIPTION All models use collapsible steering columns. All columns have integral ignition switch and locking device. Optional tilt wheel is available
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationRRA Rifle/Upper Half Identification. RRA Warranty Information. RRA Order/Return Information
MADE IN U.S.A. MADE IN U.S.A. In 1996, brothers Mark and Chuck Larson founded Rock River Arms in an 1,800 square foot shop in Cleveland, Illinois. Mark and Chuck together brought over 40 years of varied
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationSA80 COMPONENT LIST BUTT PLATE ASSY BIPOD,RIFLE GAUGE,ARMOURERS,HDSPACE SCABBARD ASY FIRING ATTCHMNT,B AMMO GRIP,HANDLE LEG,GUN MOUNT
ANNEX A COMPONENT LIST FILLER BUTT PLATE ASSY GAUGE BIPOD,RIFLE GAUGE,ARMOURERS,HDSPACE GUARD SCABBARD ASY FIRING ATTCHMNT,B AMMO BUFFER GRIP,HANDLE LEG,GUN MOUNT LEG,BIPOD,PAWL BREECHBLOCK,GROOVED,HEADLESS
More informationI.P.S.C. World Champion.
Sport Handguns Catalogue for Australia 2009/10 WWW.TANFOGLIO.COM.AU I.P.S.C. World Champion Since 1999 1 Gold Custom Eric 2007 This fully worked IPSC race gun has been designed by four time World Champion
More informationPWS MK2, MOD1 USER MANUAL END USER MAINTENANCE MANUAL
PWS MK2, MOD1 USER MANUAL END USER MAINTENANCE MANUAL INTRODUCTION 23 END USER MAINTENANCE 31 INSTRUCTIONS APPENDIX A 86 -PUBLIC- FOR COMMERCIAL RELEASE RIFLE,.308 Win, MK212 (M212RC1B) RIFLE,.308 Win,
More informationK&T Saw Shop or
11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories www.ktoutdoor.com 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure
More informationA* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120
HAND TOOLS A*0000080001 ROPE, NYLON 1/4" FT A*0000080002 ROPE, MANILLA 1/2" FT A*0000080003 DOWELL RODS 1/4" EA A*0000080004 DOWELL RODS 3/8" EA A*0000080005 DOWELL RODS 1/2" EA A*0000080006 DOWELL RODS
More informationSteering Column. Disassembly. 1. Remove instrument panel cover and reinforcement from vehicle as described in this section.
Page 1 of 14 Section 11-04A: Steering Column, Ranger 1997 Aerostar/Ranger Workshop Manual DISASSEMBLY AND ASSEMBLY Procedure revision date: 05/17/2000 Steering Column Disassembly 1. Remove instrument panel
More informationPRECISION REFLEX. Thank you for your past support and we look forward to helping you in the future. Sincerely, All of the staff at PRI
PRECISION REFLEX Precision Reflex, Inc., (PRI) is a family owned business that was started on January 1, 1979, to manufacture shooting accessories for all types of firearms and many different styles of
More informationXL12 Chain Saw UT Page 1 of 21 Carburetor Chamber
XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationPage 1 of HP B&S Vanguard Engine
1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly
More informationTPG-3 A4 PRECISION SNIPER RIFLE
TPG-3 A4 PRECISION SNIPER RIFLE Unique Alpine TPG-3 A4 MODULAR PRECISION SNIPER RIFLE The new benchmark in precision, modularity and interchange ability, designed to perform under the most critical missions
More informationSXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber
SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationRECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)
More informationRifle Factory Ishapore TENTATIVE REQUIREMENT ITEMWISE of RFI for the year through OPEN TENDER ENQUIRY NAME OF THE COMPONENT
5.56mm INSAS 1 Bag Tool Satchel ARDE/TA/94/33/1 INSAS 26754.75 2 Band Retainer 2689/157 INSAS 26754.75 3 BAYONET WITH SCABBARD ARDE SK 2915 INSAS 26754.75 4 Blank firing attachment ARDE SK 2992C INSAS
More informationknightarmco.com product catalog
knightarmco.com product catalog 2 Knight s Armament Company TABLE OF CONTENTS COMPANY BIO SR-25 SERIES RIFLES SR-30 SERIES RIFLES SR-15 SERIES RIFLES UPPER RECEIVER ASSEMBLY KITS SIGNATURE REDUCTION DEVICES
More informationK&T Saw Shop or
10-600012D MAC 10-10E CHAIN SAW 09/68 to 07/69 IPL 68857 Page 1 of 16 Accessories www.ktoutdoor.com 10-600012D MAC 10-10E CHAIN SAW 09/68 to 07/69 IPL 68857 Page 2 of 16 Accessories 68965 Manual - Owner's
More informationSpare Parts. board and intermediary trays. Table board, complete with indexing box and chain. with indexing box.
Spare Parts SPAR PARTS / 1 4 SPAR PARTS / 1 4 For Tool Cabinet 111 Padlock with 2 keys 160-08 a 004294 For Work Bench 10 Leveling feet, 4 pieces, height continuously 10-F/4 0065 adjustable up to 40 mm
More informationTABLE OF CONTENTS S-104-M
TABLE OF CONTENTS Head, Cam Case... 3-2 Stitch Cam Shaft... 3-4 Stitch Drive Shaft / Holder Assembly... 3-6 Needle Bar Drive and Vibrator... 3-8 Needle Bar... 3-10 Thread Guide and Thread Tension... 3-12
More informationThe Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM
The Whiskey-3 rifle stocks at DOLPHIN GUN COMPANY. PRICED FROM 898.00. The Whiskey-3 rifle stock DETAILED DESCRIPTION - Call ~ 01507 343898 or 0774 7771962 The Whiskey-3 Chassis (W3C) (Generation V Chassis)
More information408,408A,410,410A,512 Series
Direct Mount Pump 1 78008 PUMP - 18 GPM 1 78006 PUMP - 24 GPM 1 2 77CH0 1-1/4 X 3 NPT NIPPLE 1 3 77C90 1-1/4 X 90 M-F O-RING ADAPTER 887-554-20 1 4 77620 1-1/4 O-RING PLUG 900598-20 1 5 44316 1 O-RING
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationSECTION Automatic Transaxle/Transmission 6R80
307-01-i Automatic Transaxle/Transmission 6R80 307-01-i SECTION 307-01 Automatic Transaxle/Transmission 6R80 CONTENTS PAGE Transmission... 307-01-2 307-01-2 Automatic Transaxle/Transmission 6R80 307-01-2
More informationDV8 Tire Carrier Manufacturer Part Number TCSTTB-01 Model Number J104640
DV8 Tire Carrier Manufacturer Part Number TCSTTB-01 Model Number J104640 Installation Time: 30 Minutes Tools Required: 19mm Socket 13mm Socket Ratchet T15 Torx Driver T50 Torx Driver Painters Tape Dremel
More informationRequired Service Equipment Kit Contents
Required Service Equipment Kit Contents Part Number Description Quantity 13301 Brass Hook 1 X Service Equipment Kits 31053 40946 46126 13336 Socket Screwdriver (5/32 ) 1 X X 13337 Snap Ring Pliers (Small,
More informationPull out clutch E snap ring and withdraw complete clutch pack of clutch E. 6 HP 26 ZF Getriebe GmbH Saarbrücken CD
Press down cup spring in the mandrel press with assembly bracket 5x46 002 566 and remove snap ring with suitable pliers. Take out planet carrier and cup spring. Take the O-ring seal off the planet carrier.
More informationSupplement to Spare Parts Catalogue. Model : FT Dual Transmission - F
Supplement to Spare Parts Catalogue Model : FT - 60 Dual Transmission - F10001760 CONTENTS Tab. No. Sheet No. DESCRIPTION Page No. 1 101764-8 HEAD LIGHT, REAR LIGHT AND PLOUGH 1 LAMP 2 101766A-7 SHEET
More informationRichmond County Gunsmithing - Services List and Pricing
Richmond County Gunsmithing - Services List and Pricing This is not a complete set of services provided. Please call for more info. All services require presentation of a valid and current government issued
More information05060 Coolant Bottle Assembly
Coolant Bottle Assembly 05060 Coolant Bottle Assembly 0506 Round Bottle 05059 Coolant Botttle Bracket 05065 Ball Valve 05067 Brass Barb Fitting (bottem of the bottle) 030 Vinyl Tube 07080 Brass Fitting
More informationSuper EZ Chain Saw UT Page 1 of 18 Tools And Accessories
Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295
More informationK&T Saw Shop or
14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 1 of 12 Accessories www.ktoutdoor.com 14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 2 of 12 Accessories 84992 Kit - Reed muffler 85933 Kit - Spark
More informationTECHNICAL MANUAL UNIT AND DIRECT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST M60D, 7.62 MM, MACHINE GUN
TECHNICAL MANUAL UNIT AND DIRECT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST M60D, 7.6 MM, MACHINE GUN U.S. ORDNANCE M60D PROVEN UNDER FIRE WARNING The M60D Series Machine Guns should
More informationBRUSH CUTTER MODEL SRM-2100 TYPE 1E SERIAL NUMBER & UP MODEL SRM-2110 TYPE 1E PARTS CATALOG ECHO, INCORPORATED
PARTS CATALOG BRUSH CUTTER MODEL SRM-00 TYPE E SERIAL NUMBER 0000 & UP MODEL SRM-0 TYPE E SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, ILLINOIS 00 WWW.ECHO-USA.COM 00 ECHO, Incorporated.
More informationENGINEERED TO OUTPERFORM
ENGINEERED TO OUTPERFORM 2 0 0 9 ENGINEERED TO OUTPERFORM Established in 1988, KWA has been the leading designer and manufacturer of airsoft replica weapons for law enforcement and military training simulations.
More informationMX-1408 SELF-CONTAINED EXTRACTOR REPLACEMENT PARTS LIST
MX-1408 SELF-CONTAINED EXTRACTOR REPLACEMENT PARTS LIST SECTION 100 - TANK ASSEMBLY Ref Part Description Part 2 Dome w/filter (#2 & 8) 402478 3 Complete Solution Tank Cover 423130 5 Dome w/filter & Gasket
More informationSuper EZ Chain Saw UT Page 1 of 19 Carburetor
Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A
More informationHMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant
0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33
More informationBRUSH CUTTER MODEL SRM-2100 SERIAL NUMBER & UP MODEL SRM-2110 SERIAL NUMBER & UP PARTS CATALOG ECHO, INCORPORATED
PARTS CATALOG BRUSH CUTTER MODEL SRM-00 SERIAL NUMBER & UP MODEL SRM-0 SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, ILLINOIS 00 WWW.ECHO-USA.COM 00 ECHO, Incorporated. All Rights
More informationM MAC /77 to 02/83 IPL R2 Page 1 of 16 Tools & Accessories K&T Saw Shop or
11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories 11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester 91485 Wrench -
More informationKeppeler Sporting Rifles
Quality for top Scorers Keppeler Sporting Rifles Modular Sporting Rifles Metal Stock K0 0 9 9 Order No. 000 Metal stock Free Rifle K0 (,kg) Order No.000 Front sight carrier Order No. 0000 Metal stock Standard
More informationRYOBI 10 in. TABLE SAW MODEL NUMBER RTS10G REPAIR SHEET
RYOBI 10 in. TABLE SAW MODEL NUMBER RTS10G REPAIR SHEET 1 1 6 1 6 0 9 9 6 0 6 1 0 9 9 0 6 0 1 1 1 1 16 10 11 1 1 19 1 0 See Figure E 9 See Figure D See Note Page 11 9 FIGURE A 60 9 1 1 60 61 6 1 6 6 6
More informationSTEERING COLUMN - TILT
STEERING COLUMN - TILT 1994 Toyota Celica 1994 STEERING Toyota - Steering Column - Tilt Wheel Celica DESCRIPTION & OPERATION Tilt steering wheels incorporate a mainshaft, attached by a "U" joint to an
More informationFactory Five Racing, Inc. 818 Kit Assembly manual revision 1J update
Factory Five Racing, Inc. 818 Kit Assembly manual revision 1J update Turbo coolant overflow tank...1 Shifter handle...4 Install...4 Door skin...7 Door Liner... 10 Side mirrors... 14 Door handles and pulls...
More informationK&T Saw Shop or
12-600031U PRO MAC 55 08/73 to 03/77 IPL 92384A-R1 Page 1 of 20 Accessories www.ktoutdoor.com 12-600031U PRO MAC 55 08/73 to 03/77 IPL 92384A-R1 Page 2 of 20 Accessories 84453 Kit - Piston tool 69191 Kit
More informationSIGMA-II. Contents SIGMA-II. 1. Scissor assembly Thread guide and eccentric drive Tucker plate assembly...
Contents Contents 1. Scissor assembly... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assembly... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More informationINDEX. PAGE Adjustment mechanism for radial position of block on rotating
INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,
More informationTrouble Shooting Guide For HIPERTOUCH Series Triggers
1 PROBLEM: No Hammer Fall Scenario #1 1) The hammer does not fall when the trigger is pulled when the gray (plain) toggle springs are installed; but, nudging the hammer will cause it to fall. When the
More informationThe illustrations in the document are for reference purposes only and may not depict actual products Page 1
23.4.2018 Page 1 2 1 6 3 8 4 Other Accessories 5 7 23.4.2018 Page 2 Index Code Item Compatibility/Description Additional information Page 1 200224 BARRELED RECEIVER RELATED PARTS 4 2 200225 BOLT RELATED
More informationATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY
2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY 2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 2 of 56 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-705
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationEdition 5 September DC Electric Tool. QE2 Series. Parts Information. Save These Instructions
45609799 Edition 5 September 2015 DC Electric Tool QE2 Series Parts Information Save These Instructions QE2 Motor Housing Assembly, Back End - Exploded View For Inline and Angle Tools 6 13 11 4 5 13 6
More informationLeft handed Intergraded Nonreciprocating LINCH. Davis Tactical Solutions Patent Number:
Left handed Intergraded Nonreciprocating Charging Handle LINCH Davis Tactical Solutions Patent Number: 8117954 Table of contents 1. PRODUCT OVERVIEW 2. RIFLE COMPATIBILITY 3. OPTICAL RAILS AND ACCESSORIES
More informationZ-Gate Universal Shifter
Installation Instructions Z-Gate Universal Shifter Fits: GM, Ford, Lincoln and Chrysler Transmissions See Application Guide for Specific Applications Part #80681 Rev 06/01/2018 WORK SAFELY! For maximum
More informationInstallation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#
Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,
More informationDrawing A Cylinder, Engine pan
Drawing A Cylinder, Engine pan 1 Drawing A Cylinder, Engine pan Reference Item number Qty Description 1 4180 020 1207 1 Cylinder with piston Ø 38 mm (33.2008) 2-9, 16 2 4180 025 2002 2 Valve 3 4180 025
More informationPARTS CHASSIS AND HOOD
MODEL 3xA CHASSIS AND HOOD 3 0 3 0 3 3 3 3 0 3 3 3 3 3 3 0 3 3 3 MODEL 3xA CHASSIS AND HOOD Seat 000 Cap, Push 0n 0x3 3 Spring 00 Screw x Bolt, Wing 000 Washer 0x Bolt, Shoulder 00x Support, Seat 0E00
More information(8) Perform negative-pressure check IAW paragraph (9) Install mask-mounted regulator in regulator holder.
(8) Perform negative-pressure check IAW paragraph 6.6.3. (9) Install mask-mounted regulator in regulator holder. 6.7.3.2 Mask-Mounted Regulator Removal and Installation. O-ring, PN 18002-00 Pliers, slip
More informationPWC - 33
PWC - 33 WY33N13BS SPARE PARTS LIST Mower Assembly Caster Kit Ref.# Part# Description Ref.# Part# Description 1 3301010 Linchpin 11 B6182-12 Lock nut M12 2 B97.1-20 Washer 20 12 3301040 Caster Wheel Arm
More informationTECHNICAL MANUAL INTRODUCTION UNIT MAINTENANCE INSTRUCTIONS DIRECT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS MAINTENANCE OF AUXILIARY EQUIPMENT
ARMY TM 9-1005-224-23&P AIR FORCE T.O. 11W2-6-4-11 Supersedes Copy Dated July 1987 See Page i for details TECHNICAL MANUAL UNIT AND DIRECT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
More informationMaintenance Information
16575243 Edition 2 October 2013 Air Screwdrivers 1R Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationDVX 300 Euro. Model Number A2012KSF2BEUK SHARE OUR PASSION.
ATV 2012ATV Illustrated Parts Manual DVX 300 Euro Model Number A2012KSF2BEUK TM SHARE OUR PASSION. TABLE OF CONTENTS 2012 ATV DVX 300 Euro (Model No. A2012KSF2BEUK) BODY PANEL AND HEADLIGHT ASSEMBLY...
More informationSuggested Spares Guide
Suggested Spares Guide 370 Engine Gearbox Side Feed 14", 15", 16" x 22" and 14 x 21" Chambers A Product of Sherwood, Oregon USA Rev: 11-17 1 How to Use This Guide 1 Section. Spare parts are listed by when
More information99125B - Series N Brush Lift Assembly Model :99125B 20" EZ Floorkeeper (w/ 4-6 V Batteries) - Series N
995B - Series N Brush Lift Assembly Model :995B 0" EZ Floorkeeper (w/ - V Batteries) - Series N Page- 5 7 9 0 5 7 9 5 7 9 0 5 7 9 0 070 RETAINING RING PIN 9 WASHER 907 WELDMENT BRUSH LIFT PEDAL 900 PEDAL
More informationPart list for Kawasaki H2, 1972
Part list for Kawasaki H2, 972 . Cylinder head, cylinder. . Cylinder head, cylinder. 9205-049 NUT 0 m/m 2 2 40B400 WASHER-plain 4 m/m 2 3 46E400 WASHER-spring 4 m/m 2 4 92070-036 SPARK PLUG NGK B9 HS 3
More informationX4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY
2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,
More informationHANDLEBAR AND CONSOLE ASSEMBLY
Section 6 Parts List HANDLEBAR AND CONSOLE ASSEMBLY 4 33 47 4 49 7 3 78 4 97 46 44 37 38 37 48 39 35 36 34 7 3 4 5 45 4 3 4 0 33 9 96 80 6 300 84 9 5 30 4 9 30 4 3 43 97 0 43 3 68 9 9 Models 753B, F753B
More informationInformation Components and Spare Parts
Components and Spare Parts For tool cabinet 111 For tool trolley 162 C Chain with locking of chain case 162 C-01/2 079735 Table board, complete with worktop 162 C-010 079780 Swivel castor, x 125 mm, complete
More informationMaintenance Information
16575219 Edition 4 October 2013 Air Screwdrivers QP1P, QP1S and QP1T Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
More informationREF. NO. DESCRIPTION TOP COWLING 2 MOLDING, AIR DUCT 3 RIVET 4 SEAL 5 HOLDER, CLAMP BAND 6 BOLT, WITH WASHER 7 HOOK
SUZHOU ALLPASS MACHINERY CO.,LTD Add:No.85,Jishui Road,Jinfeng Industrial Park,Mudu Town,Suzhou 215102,Jiangsu,P.R.China T15 SPARE PARTS EXPLODED DRAWING FIG. 1 1 TOP COWLING TOP COWLING 2 MOLDING, AIR
More informationK&T Saw Shop or
12-600104D MAC 140 01/81 to 03/83 IPL 215273-R1 Page 1 of 14 Tools & Accessories www.ktoutdoor.com 12-600104D MAC 140 01/81 to 03/83 IPL 215273-R1 Page 2 of 14 Tools & Accessories 93090 Guide - Timing
More information90 Utility Model Number A2013KUB2BUSZ SHARE OUR PASSION.
2013 90 Utility Model Number A2013KUB2BUSZ TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 90 (Model No. A2013KUB2BUSZ) BODY PANEL AND HEADLIGHT ASSEMBLY... 1 FRONT AND REAR RACK ASSEMBLY... 2 FRAME AND
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More informationPage 1 of 88. Feb T.Tanaka
0004011 503535701 STRAINER 00124-00890 574089101 BOLT 0016032 503616601 GASKET 0016033 537020101 GASKET 0016051 503884401 GASKET 0020012 503665901 LEVER 0021001 503480001 PIN FULCRUM 00217-06000 574089201
More information