Inverse-Time Overcurrent & E/F Relays. Type ICM 21, ICM 21B. Station Automation & Protection. ABB Substation Automation Products
|
|
- Debra Tyler
- 6 years ago
- Views:
Transcription
1 Station Automation & Protection Inverse-Time Overcurrent & /F Relays Type ICM, ICM B ABB Substation Automation Products
2 Features the driving solenoid has tappings, corresponding to the seven stages of the non-interrupting setting Reliable, robust Ferraris measuring system switch for the relay current. without gearing or coupling The adjustment of the time setting disc determines Range of time setting 0-00% (see the angle of rotation of the Ferraris disc prior to current/time characteristic) contact making. Range of current setting :, adjustable in The braking magnet consisting of a pair of cross- 7 steps by means of non-interrupting setting magnetized magnets determines the speed of switch rotation of the Ferraris disc at a given current. High resetting current, at least 90% of relay setting Max. overrun time of 0.0 s Temperature -compensated measuring system Instantaneous maximum-current trip with own contact and own visual signal Instantaneous trip is continuously adjustable in either I x.5-0 or I x -0 range and to infinity Separate double-pole tripping contactor with indicator, for high contact rating Low internal consumption. Plug-in active part, the C.T. connections being automatically short-circuited when the relay is withdrawn. Tropicalized design. Fig. - Active part of the relay ICM = Coil terminals of the indicating contactor Application = Indicator button of delayed trip The relay type ICM is an over current relay with an = Contacts of the indicating contactors CV = Time setting disc inverse-time characteristic. That means to say, its 5 = Moving contact pin of the relay time contact tripping time is shorter, the greater the fault current. 6 = Relay time contact As secondary relay parts it is fed by current 7 = Indicator button of instantaneous trip transformers. It is used to protect parts of electrical installations and simple line systems against over 9 = Damping magnet 0 = Damping magnet mounting screw current, earth fault and short circuits. For the = Temperature compensating lever. protection of solidly earthed systems against earth = Pointer of arm faults, relays are available with current setting up to = Locking arm 0. A. The relay can be employed in all situations 5 = Slide for adjusting current where delayed interruption of short circuits is required, provision also being made for 7 = Driving magnet instantaneous tripping at a set maximum current. Design & principle The relay comprises a temperature-compensated Ferraris measuring system which requires no coupling, gearing or hinged armature. The mm thick Ferraris disc of aluminum is drawn by a recall spring, a recall tape and a worm against a stop on the time adjustment disc, and is thus held in its position of rest. The worm compensate for any change in the force of the recall spring within an angle of rotation of o the Ferraris disc of 0. Thus the recall torque remains constant. The driving torque and the angular speed of the Ferraris disc are constant. As a result the current/time characteristics of the relay are exactly proportional.the relays are manufactured with two current/time characteristic for 50 Hz (Fig. 6, 7 ). The characteristic determines the type designation of the particular relay. The current coil of 8 = Drum for setting the instantaneous trip = Switch for setting relay pick-up current 6 = Scale for marking factory adjustment of slide 8 = Coil of the driving magnet 9 = Ferraris disc 0 = Test Contacts T x I a b a b D D Fig. - Wiring diagram of relay types ICMKP, ICMBKP with test terminals (MR 0059) B A C
3 current release is drawn by the leakage flux of the driving magnet, acting against the force of a spring. The maximum current setting may be adjusted at the adjusting cylinder. When set to infinity ( ) the release is blocked. The release has its own contact (normally open) and a signal button which can be reset from outside. The indicating release contactor (CV) has two separate contacts with double interruption and a signal button which pops out when the relay trips and can be reset manually. The contactor coil is a voltage coil. When the relay picks up, the contactor coil is connected to the auxiliary voltage by relay contacts. The breaker tripping current is handled by the indicating contactor. a a b Legend : A : Current coil B : Time-lag contact C : Instantaneous contact D : Indicating tripping contactor : Shorting switch XI : Signal button of instantaneous trip T : Signal button of indicating contactor T T b D It is possible to incorporate two separate indicating contactors, one for the inverse-time tripping, the Fig. - Wiring diagram of relay types ICMNP, ICMBNP with test terminals (MR 005) D B x C Fig. - Wiring diagram of relay types ICMP, ICMBP with test terminals (AK 56) B A A other for the instantaneous maximum-current tripping. The active part of the relay is plugged into the dust-tight casing. The locking arm, normally vertical, can then be pulled down, in which position the active part of the relay is already disconnected from the leads and the C.T. connections automatically short-circuited. The relay can now be entirely withdrawn from its casing, for instance for testing or repair. Designation of types Type of relay ICM Inverse time relay, British Standard / Fig. 6 IS : ICM B Very inverse time relay Fig. 7 The relay casing is supplied for flush mounting in a switchboard. (see Fig. 8). Test terminals, type suffix p At the front of the relays are the easily accessible test terminals 0 (Fig.). When terminals and are provided for relays with two indicating contactors, test terminals can only be provided for relay terminals - 0. Circuit - (signal for instantaneous trip) is therefore not equipped with test terminals. Current/time characteristic 50 Hz For the special model with test terminals a separate test plug (Fig.5) can be supplied. For testing, it is inserted beneath the pair of lugs in the casing, and then the drawout arm is lowered. First of all the shorting switches close, then the connections to the terminals of The armature of the instantaneous maximumthe casing are interrupted and finally the test terminals are connected to the terminals of the test plug. The test plug is supplied with m of cable but without any terminals on the supply side. Fig. 5- Test plug for inverse-time overcurrent relay type ICM.
4 Operating Time sec Operating Time sec x I current at 50 Hz x I current at 50 Hz Fig 6 - Inverse time characteristics (BS / Fig 7 - Very Inverse time characteristics of IS ) of relay type ICM.. relay type ICMB.. Technical data Current range : Relay base current setting I :.5/0 A A.0/.0 A A 0.5/.0 A A 0./0.8 A A 0./0.A A Burden at pick-up current : at 50Hz VA Rated frequency Permissible sustained current Short-circuit strength : thermal (for s) Dynamic 50 Hz x set current 00 x minimum set current 500 x minimum set current Timing element Starting current. x I ± % Closing current Not greater than. x I Time-lag as per characteristic, Fig. 6,7 Max. rror upto x I : ± 0 % to x I : ± 7 % to 0 x I : ± 5 % Reset time when time-lag set to 00% Max. overrun time Reset current approx. 9.5 s 0.0 s >0.9 x I
5 Instantaneous maximum-current trip Setting range.5 0 x / and 0 x / and Max. error up to 0 x I setting ± 0% Operating time at twice set current or over Drop-out current 0.07 s. Max. approx...5 x base current I of relay. Indicating contactor Indicating contactor with voltage coil Rated auxiliary voltage Nominal consumption, 0, 8, 0, 0,50 VDC approx. W on d.c. Nature of free contacts normally open ( or N/C and N/O ) Operating time approx. 0.0 s Contact ratings : sustained current making current max. 0 A max. 0 A Maximal break current Voltage 50 Hz a.c. resistive D.C. and inductive, resistive inductive p.f. = 0. contact 0 V. A 0.8 A 0 V 0 A 6 A A -60 V 6 A 7.5 A contacts in series 0 V 6 A.5 A 0 V 5 A 0 A These are max. values for a small number of operations. To attain a contact life of about 0,000 operations, they should be reduced to about 60%. D.C. L/R = 5 ms General items Test voltage kv/50hz, min. Weight with one indicating contactor.8 kg Weight with two indicating contactors.0 kg Weight of test plug with m cable.5 kg Circuit diagrams see page, Dimensions see page 6
6 Table - Contact arrangements, type designations, wiring diagrams of relay type ICM. Contact Arrangement Relay Type NO NO+NC NO NO+NC Wiring Diagram Instantaneous Current trip range. Current Range Amp. Aux. Supply DC ICM ICMP AK-56 AK-56 N.A. N.A..5-0 x I ICMB - 0 x I ICMBP ICMN ICMNP MR-005 MR-005 N.A. N.A. N.A. ICMBN ICMBNP ICMK ICMKP N.A. N.A. MR-0059 MR x I ICMBK - 0 x I ICMBKP 0. to to to to.5 to 0,0, 8, 0, 0, 50 V ICM ICMB Suffix N Suffix K Suffix P Type Designation Inverse time relay ( Sec at 0 x I ) and with instantaneous current trip unit Very inverse time relay (. Sec at 0 x I ) and with instantaneous current trip unit Without instantaneous current trip unit With two elements of indicating contactor With test terminal Dimensions Ge 55 6 Ob Ir ± Panel cut-out Legend: Aa : Terminals M5 Ir : Mounting frame Ge : arthing lug Ob : Fixing screw Aa Fig. 8 - Dimensions for mounting 5 Rear view
7 Ordering Details Item No.... Qty.... Refer table for selection and mark ( ) appropriate boxes. Relay Type : ICMN ICM BN ICMNP ICM BNP ICM ICM B ICMP ICM BP ICMK ICM BK ICMKP ICM BKP Current Range : A A A A.5-0 A Aux Supply : VDC 0VDC 0VDC 0VDC 8VDC 50VDC Instantaneous Current trip range : - 0 x I set.5-0 x I set Contact : NO + NC NO + NC Arrangement NO NO
8 Network Management Business Management Meter & Load Management Consulting & Services Station Automation & Protection Communications Panorama is the standard for a comprehensive range of integrated solutions for efficient and reliable management of power networks. Using innovative information technology, Panorama delivers total control of the power process, from generation to consumption. The Panorama standard covers six application areas, each offering specific solutions. MDB070 -YN 0-00 Asea Brown Boveri Limited Substation Automation Products Maneja, Vadodara 90 0, India. Tel. : , 608, 6087 Fax : mail : aicds@in.abb.com
Inverse-Time Overcurrent & E/F Relays. Type ICM 21, ICM 21B
Inverse-Time Overcurrent & E/F Relays Type ICM 21, ICM 21B ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve
More informationBistable Relay. Types PSU6n, PSU14n. Station Automation & Protection. ABB Substation Automation Products
Station Automation & Protection Bistable Relay Types PSUn, PSUn. ABB Substation Automation Products Features High degree of reliability, even when it has been idle for a long time PSUn.. with mechanical
More informationAuxiliary Relay. Type CV2
Auxiliary Relay Type CV2 ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while lowering environmental
More informationAuxiliary Relay. Type P8n, PQ8n, PN8n
Auxiliary Relay Type P8n, PQ8n, PN8n ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while lowering
More informationAuxiliary Relay. Type RXP8n, RXPQ8n
Auxiliary Relay Type RXP8n, RXPQ8n ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while lowering
More informationType CDG 14 Extremely Inverse Time Overcurrent and Earth Fault Relay
Type DG 14 Extremely Inverse Time Overcurrent and Earth Fault Relay Type DG 14 Extremely Inverse Time Overcurrent and Earth Fault Relay DG 14 drawn out from the case The type DG 14 relay is a heavily damped
More informationBistable Relay. Types PSU6n, PSU14n.
Bistable Relay Types PSU6n, PSU14n. ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while lowering
More informationABB ! CAUTION. Type KRV Directional Overcurrent Relay E 1.0 APPLICATION 2.0 CONSTRUCTION AND OPERATION. Instruction Leaflet
ABB Instruction Leaflet 41-137.2E Effective: February 1994 Supersedes I.L. 41-137.2D, Dated February 1973 ( )Denotes Change Since Previous Issue. Type KRV Directional Before putting relays into service,
More informationCOM Overcurrent Relay
41-102.1B COM Overcurrent Relay Figure 1: COM-5 Class 1E Relay (Front View) 9664A28 Photo Figure 2: COM-5 Class 1E Relay (Rear View) 9664A29 Photo Photo needed here 2 COM Overcurrent Relay 41-102.1B 3
More information2.0 CONSTRUCTION AND OPERATION 3.0 CHARACTERISTICS K. CO (HI-LO) Overcurrent Relay
41-100K 2.0 CONSTRUCTION AND OPERATION The type CO relays consist of an overcurrent unit (CO), either an Indicating Switch (ICS) or an ac Auxiliary Switch (ACS) and an Indicating Instantaneous Trip unit
More informationABB Automation Inc. Substation Automation and Protection Division Coral Springs, FL 33065
ABB Automation Inc. Substation Automation and Protection Division Coral Springs, FL 33065 Instruction Leaflet Effective: October 1999 Supersedes I.L. 41-133R, Dated August 1998 ( ) Denotes Changed Since
More informationDIP SWITCH BASED EARTH LEAKAGE RELAY (ELR) WITH CORE BALANCE CURRENT TRANSFORMER (CBCT / ZCT) EL SERIES
PROK DEVICES PRIVATE LIMITED B-80, 2 nd & 3 rd Floor, KSSIDC Industrial estate, 4 th Main Road, 6 th Block, Rajaji Nagar, Bengaluru -560010 Ph no: 080-41480777, 080-41157700, Email:,, www.prokdvs.in DIP
More informationHGA. Hinged Armature Auxiliary. Hinged armature auxiliary relay to perform auxiliary functions in AC and DC circuits.
HA Hinged Armature Auxiliary Hinged armature auxiliary relay to perform auxiliary functions in and circuits. eatures and Benefits Molded case with 4 mounting options Drawout case available Applications
More informationType CRN-1 Reverse Power Relay 50 and 60 Hertz
ABB Automation Inc. Substation Automation and Protection Division Coral Springs, FL 33065 Instruction Leaflet 41-251.2P Effective: June 1991 Supersedes I.L. 41-251.2N Dated April 1988 ( )Denotes Change
More informationVOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS
VOLUME: IIIC SCHEDULE IIIC/4 11 KV AND 3.3 KV SWITCHGEARS A. 11 KV SWITCHGEAR 1.0 SWITCHGEAR ASSEMBLY 1.1 Make : 1.2 Type : 1.3 Reference Standard : 1.4 Voltage (Nom./Max.) KV : 1.5 Phase, Frequency No,Hz.
More informationOutdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications
Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in power and automation technologies that enable utility and industry customers
More informationTABLE I 60 CYCLE BURDEN OF THE CVD RELAY AT CONTINUOUS RATING
the voltage unit contacts, this effect is negligible. 3.2 Trip Circuit The main contacts will close 30 amperes at 250 volts dc and the seal-in contacts of the indicating contactor switch (ICS) will carry
More informationType DTH 31, 32 DTTM 11, 12 High Speed Biased Differential Relays
Type DTH 31, 32 DTTM 11, 12 High Speed Biased Differential Relays Type DTH 31, 32 DTTM 11, 12 High Speed Biased Differential Relays DTH relay withdrawn from case Features l High speed. l Low burden. l
More informationCat. RK 47-2 E CASE AND MOUNTING. January 1967 DESIGN AND MODE OF OPERATION
The RIDA relay is a time-lag over-current relay whose operating time is independent of the current. The relay is available with different current scales for 50 Hz with the time-lag scale 0.2-6 s and for
More information3.0 CHARACTERISTICS E Type CO-4 Step-Time Overcurrent Relay
41-106E Type CO-4 Step-Time Overcurrent Relay A core screw accessible from the top of the switch provides the adjustable pickup range. The IIT contacts are connected in the trip circuit to trip instantaneously.
More informationMotor-drive mechanism, type BUL. Technical guide
Motor-drive mechanism, type BUL Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required
More informationType SOQ Negative Sequence Time Overcurrent Relay
ABB Power T&D Company Inc. Power Automation & Protection Division Coral Springs, FL Allentown, PA April 1998 Supersedes DB dated August 1991 Mailed to: E,D, C/41-100B For Protection of Rotating Machinery
More informationADDITIONAL INFORMATION. BE1-50/51B SELF POWERED TIME OVERCURRENT RELAY and RETROFIT KITS. FEATURES and APPLICATION Page 2
BE1-50/51B SELF POWERED TIME OVERCURRENT RELAY and RETROFIT KITS BE1-50/51B in S1 Case BE1-50/51B-219, 226 BE1-50/51B-214, 225, 230 - IAC Retrofits CO Retrofit BE1-50/51B-229 (not shown) SFC Retrofit The
More informationUMBW-UL489 and UL1077 Listed
-UL489 and UL77 Listed Introducing the New WEG Series Thermal-Magnetic Miniature Breakers. This new offering includes both UL489 and UL77 approvals to provide a solution for circuit & equipment protection
More informationPower IT MV Live Tank Vacuum Circuit Breaker Model VBF
Power IT MV Live Tank Vacuum Circuit Breaker Model VBF ABB - a global leader in power and automation technologies ABB (www.abb.com) is a global leader in power and automation technologies that enable utility
More informationA - Add New Information C - Change Existing Information D - Delete Information. Page 7. Delete the fourth paragraph beginning CAUTION
ABB Effective: November 1990 This Addendum Supersedes all Previous Addenda Addendum to Instruction Leaflet 41-137.3H Type KRD-4 Directional Overcurrent Ground Relay A - Add New Information C - Change Existing
More informationTrip Circuit and Trip coil supervision Relay
PROTECTION Trip Circuit and Trip coil supervision Relay Type VAX Customer Benefits: Trip circuit and trip coil supervision relay Choice of pre closing and post-closing supervision Simple and robust construction
More informationMagnetic Overload Relays
Magnetic Overload Relays Series N147 Series N147 Overload Relays are of the magnetically operated self reset type, designed for use on or motor starters and controllers for Navy Service A applications.
More informationABB Power T&D Company Inc. Relay Division Coral Springs, FL Allentown, PA. Non-Directional, Single Phase Adjustable Time Delay Device No.
September, 1990 Supersedes Descriptive Bulletin 41-100, pages 1-4, dated June, 1989 Mailed to: E, D, C/41-100A Hi-Lo co induction-disc type overcurrent relays are activated when the current in them exceeds
More information3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00,
Low-Voltage Controls and Distribution > Industrial Controls > Protection Equipment > Circuit Breakers/Motor Starter Protectors > Motor Starter Protectors SIRIUS RV up to 00 A RV0-0DA5 CIRCUIT-BREAKER,
More informationReverse power relay and protection assemblies
Reverse power relay and protection Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE980053) (SE980054) Features Micro-processor based time directionalcurrent relay/protection
More informationCHAPTER 4 PROTECTION REQUIREMENTS
CHAPTER 4 PROTECTION REQUIREMENTS CHAPTER 4 PROTECTION REQUIREMENTS 4.1 General Means of protection for automatic disconnection against phase and earth faults shall be provided on the customer main switch.
More informationIndustry Automation Control Components
Industry Automation Control Components SIRIUS 3RV2 Motor Starter Protectors SIRIUS 3RV21 Motor Starter Protectors can be easily and flexibly combined with other SIRIUS devices to reduce space requirements
More informationL. Photo. Figure 2: Types CA-16 Relay (rear view) Photo. Figure 1: Types CA-16 Relay (front view)
Figure 1: Types CA-16 Relay (front view) Photo Figure 2: Types CA-16 Relay (rear view) Photo 2 Sub 5 185A419 Sub 6 185A443 Figure 3: Internal Schematic of the Type CA-16 bus Relay or CA-26 Transformer
More information22AF 40AF AF 150AF 225AF 400AF 800AF
Contactors MC-Series UL508 E108780 Contactor 3 Pole Standards and Certifications UL508 IEC 60947-2 & IEC 60947-4-2 CSA C22.2 No.14 Features 8 Frame Sizes 1/2HP up to 600HP @ 480V AC Screw Terminals (Lug
More informationABB. Type CRQ Directional Negative Sequence Relay for Ground Protection B 1.0 APPLICATION 2.0 CONSTRUCTION AND OPERATION CAUTION
ABB Instruction Leaflet 41-163.2B Effective: January 1977 Supersedes I.L. 41-137.3A, Dated September 1974 ( ) Denotes Change Since Previous Issue Type CRQ Directional Negative Sequence Relay for Ground
More informationModule 2 CONTROL SYSTEM COMPONENTS. Lecture - 4 RELAYS
1 Module 2 CONTROL SYSTEM COMPONENTS Lecture - 4 RELAYS Shameer A Koya Introduction Relays are generally used to accept information from some form of sensing device and convert it into proper power level,
More informationThermal-magnetic Miniature Circuit Breaker 4230-T...
Thermal-magnetic Miniature Circuit Breaker 420-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-2, UL 077 and UL 489 for DIN rail
More informationSICOP. Bimetal Overload Relays Type 3UA5/6 & 3UC5/6. Introduction. Application
s SICOP Bimetal Overload Relays Type 3UA5/6 & 3UC5/6 Introduction The bimetal overload relays type 3UA5/6 & 3UC5/6 relays are indigenously manufactured and bring to the users a whole range of benefits,
More informationPower IT MV Live Tank Vacuum Circuit Breaker. Model OVB-SDB
Power IT MV Live Tank Vacuum Circuit Breaker Model OVB-SDB ABB - a global leader in power and automation technologies ABB (www.abb.com) is a global leader in power and automation technologies that enable
More informationMemshield - ACB Ratings & Specifications
Memshield Memshield - ACB Ratings & Specifications Rating and specifications Current rating, A List No Number of poles RATED CURRENT (A) [In] IEC, BS, VDE, AS Neutral pole ampere frame (A) RATED PRIMARY
More informationFigure 1. Type CWP-1 Ground Relay (Front View) Figure 2. Type CWP-1 Ground Relay (Rear View) E
Figure 1. Type CWP-1 Ground Relay (Front View) Figure 2. Type CWP-1 Ground Relay (Rear View) 41-242.5E 2 Typical 60 Hertz time product curves for the type CWP-1 relay are shown in Figure 4 with 100 volts
More informationDPX moulded case circuit breakers
BREAKING AND PROTECTION DEVICES 10 / 2011 DPX moulded case circuit breakers DPX moulded case circuit breakers offer optimum solutions for the protection requirements of commercial and industrial installations.
More informationModel HEA Multicontact Auxiliary
GE Grid Solutions Model HEA Multicontact Auxiliary Features and Benefits Electrically separate outputs available Various shaft lengths available Locks equipment out of service Applications Contact multiplication
More informationDPX 1600 Electronic release
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 1600 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND
More informationPRODUCT / TEST MANUAL 2L9K2 BATTERY EARTH FAULT RELAY
Sheet 1 of 5 Order Number Serial Number PRODUCT / TEST MANUAL 2L9K2 BATTERY EARTH FAULT RELAY Issue Date Level B 27/05/1999 Initial issue. Summary of changes Due to RMS continuous product improvement policy
More informationBE1-50/51B with S1 Case or FT-11 sized Case and Cover For non-retrofit applications, see Product Bulletin UHD.
BE1-50/51B SELF POWERED TIME OVERCURRENT RELAY RETROFIT KITS BE1-50/51B with S1 Case or FT-11 sized Case and Cover For non-retrofit applications, see Product Bulletin UHD. BE1-50/51B, CO Retrofits BE1-50/51B,
More informationECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters. Lecture 6 Contactors and Motor Starters
ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters Text Book: Chapter 6, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Paul I-Hai
More informationAuxiliary Relay (7PJ11) and Trip Relay (7PJ12)
s www.siemens.com/energy Auxiliary Relay (7PJ) and Trip Relay (7PJ2) Better protection and more efficiency for your power system Answers for infrastructure and cities. Auxiliary Relay and Trip Relay Catalogue
More informationCircuit Protectors CP31F, 32F, 33F
CP3F, 32F, 33F CP-F slim type circuit protectors 20V AC/6V DC (-pole) 0.A to 30A 20V AC/2V DC (2-pole) 0.A to 30A 20V AC (3-pole) 0.A to 30A Description FUJI's compact and high-performance CP-F series
More informationB CW POWER RELAY
41-241.31B CW POWER RELAY nected in such a way that current, (I A ), leads voltage, (V BA ), by 150 degrees when the motor is operating at unity power factor. Loss of excitation to the motor causes a large
More information(Example) In case of DC24 to 48V, it is operating time for DC24V.
7 9 8 Closing coil (CC) The closing coil is a device to close the breaker by remote control. An interlock to prevent pumping is provided electrically. CC circuit diagram Rated voltage (Applicable voltage
More informationPage. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
More informationComponents for EEx e Panels
Circuit Interrupters / Motor Switches 8006/3 8543/1 8543/2 8548/2 40 A 63 A 80 A 1 160 A 500 V 660 V 500 V 01766E00 No. of poles 12 poles Isolator features Switching capacity 400 V, AC3 11 kw 22 kw 37
More informationwww. ElectricalPartManuals. com Type CO Overcurrent Relays E ABB Power T&D Company Inc. Relay Division Coral Springs, FL Allentown, PA
Supersedes DB 41-100A, pages 1-12, dated November, 1988 Mailed to: E, 0, C/41-100A CO-2 eoa ABB Power T&D Company nc. Relay Division Coral Springs, FL Allentown, PA Non-directional, Single Phase, Adjustable
More informationBulletin 825 SMM Smart Motor Manager
Bulletin 825 SMM Smart Motor Manager Your order must include: Cat. no. of the Smart Motor Manager selected with supply Voltage Suffix Code, Cat. no. of Converter Module selected, and, If required, Cat.
More informationNew DX 3 High rating & breaking capacity
New High rating & breaking capacity a new range OF MOduLar CirCuiT BrEakErs up TO 125 a T new dx³ MCBs AN ENHANCED range for HIgH-pErforMANCE INstALLAtIoNs DX³ : the new Legrand MCBs with dx³, Legrand
More informationMAGNETIC MOTOR STARTERS
Chapter 6 MAGNETIC MOTOR STARTERS 1 The basic use for the magnetic contactor is for switching power in resistance heating elements, lighting, magnetic brakes, or heavy industrial solenoids. Contactors
More informationR-MAG Vacuum Circuit Breaker with Magnetic Actuator Mechanism 15.5 kv - 27 kv; 1200 A A
R-MAG Vacuum Circuit Breaker with Magnetic Actuator Mechanism 15.5 kv - 27 kv; 1200 A - 3700 A R-MAG The R-MAG is truly the next generation in vacuum circuit breakers, combining industry recognized magnetic
More informationWORKSHOP SPECIFICATIONS
WORKSHOP SPECIFICATIONS DPX 3 160 & 250 MOULDED CASE CIRCUIT BREAKERS THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES DPX 3 RANGE Not only do DPX³ 160 and DPX 3 250 MCCBs provide
More informationKD LV Motor Protection Relay
1. Protection Features KD LV Motor Protection Relay Overload (for both cyclic and sustained overload conditions) Locked rotor by vectorial stall Running stall / jam Single phasing / Unbalance Earth leakage
More informationCobra-S. Catalog Cobra-S
Cobra-S Solid Dielectric, Three Phase Reclosers Providing electronic three phase overcurrent protection for systems rated through 38kV, 800A continuous current, 12.5/16kA symmetrical interrupting Control
More informationAC Relays. Type IC5182. Ordering Information. Control Power Requirements. Contact Ratings (Amperes)
AC Relays Type IC5182 Series N147 Overload Relays are of the magnetically operated self reset type, designed for use on A.C. or D.C. motor starters and controllers for Navy Service A applications. Specification
More informationTECHNICAL SPECIFICATIONS OF PCC PANEL
S. no. TECHNICAL SPECIFICATIONS OF PCC PANEL Technical parameters AS PER SPECIFICATION CONSTRUCTIONAL FEATURES TO BE FILLED BY THE SUPPLIER 1 Manufacturer s name To be specified by supplier 2 Rated operational
More informationBreaker failure relay REB 010
Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE970138) Features Local redundant protection when the circuit breaker does not operate The technique with microprocessors
More informationSURE TRIP RETRO KITS
RMS CURRENT MEASUREMENT with SURE TRIP RETRO KITS Circuit Breaker Solid State Controls with SURE TRIP LOGIC The Sure Trip Solid State Tripping Systems Have Been Designed, Tested And Produced To all Applicable
More informationSURE-TRIP OEM RELACEMENT TRIP UNIT
RMS CURRENT MEASUREMENT with SURE-TRIP OEM RELACEMENT TRIP UNIT Update Circuit Breaker Solid State Controls with SURE-TRIP LOGIC The SURE-TRIP Solid State Tripping Systems Have Been Designed, Tested And
More informationKtec Contactors and thermal overloads
Contactors and thermal overloads Techna KTEC series contactors provide a complete solution for your ac contactor requirements.the range carries TUV, UL & CSA certification, for use in Europe, North America
More informationContents. We build a better future! MCC HCB
H8PU Low Voltage We build a better future! HYUNDAI s low voltage motor control center H8PU series with a withdrawable unit are of multi-tier, factory assembled and for rated voltage of up to 660V AC. Contents
More informationINTERPLANT STANDARD - STEEL INDUSTRY
INTERPLANT STANDARD - STEEL INDUSTRY IPSS SPECIFICATION FOR MAGNETIC OVER- CURRENT RELAYS FOR ac AND dc MOTORS PROTECTION UP TO 650 V (FIRST REVISION) CORRESPONDING INDIAN STANDARD DOES NOT EXIST IPSS:1-04-008-11
More informationMotor Protection Circuit Breakers 3VU13 and 3VU16
Motor Protection Circuit Breakers 3VU13 and 3VU16 3VU13/3VU16 is suitable for use in fuseless motor feeders upto 11KW/22KW (25A/63A) respectively. 3VU motor protection circuit breakers are used for protection
More informationDIAC DIFC DSFC Digital Self Powered Overcurrent Protection
GEK 070B GE Power Management DIAC DIFC DSFC Digital Self Powered Overcurrent Protection *(RZHU0DQDJHPHQW $QGHUVRQ$YHQXH 0DUNKDPQWDULR &DQDGD/% ZZZJHFRPLQGV\VSP TABLE OF CONTENTS INTRODUCTION... PRODUCT
More informationLow Signal Relay. To Order: Select the part number and add the desired coil voltage rating, (e.g., G6A-274P-ST-US-DC12).
Low Signal Relay High sensitivity can be driven by digital circuits Low-profile design allows use in 12.70 mm (0.50 in) PC board rack Surge withstand voltage meets FCC Part 68 regulation Units can be mounted
More informationFunctions provided by measuring relays in railway equipment
Functions provided by measuring relays in railway equipment 1-Current relays -Minimum current relays (During normal operation, if the current is present these relays are in operating position and switch
More informationSafeGear Motor Control Center Arc Resistant Metal-Clad Construction Brochure
2017 SafeGear Motor Control Center Arc Resistant Metal-Clad Construction Brochure SafeGear Motor Control Center Arc resistant Metal-Clad construction Brochure Table of Contents 1. Description 1 1 2. SafeGear
More informationcor Long Run Experience
Moulded Case Circuit Breakers Moulded Case Circuit Breakers 16-1250A cor Long Run Experience cor Breaking capacity (according to IEC 947-2 at 415V) Icu 100 D160L D250L D400L D630L 70 60 DH800 50 35 30
More informationCrane Control Class 9055
Catalog 17 CONTENTS Description.....................................................Page pplication Data................................................... General Information and Pricing.......................................
More informationR-MAG. Vacuum Circuit Breaker with Magnetic Actuator Mechanism
R-MAG Vacuum Circuit Breaker with Magnetic Actuator Mechanism R-MAG Features: Low maintenance 10,000 mechanical operations (five times ANSI requirements) Simple magnetic actuator Vacuum interruption Definite
More informationDPX 630 Electronic release
87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 630 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND MECHANICAL CHARACTERISTICS
More informationMichigan State University Construction Standards SECONDARY UNIT SUBSTATIONS PAGE
PAGE 261116-1 SECTION 261116 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationPORTABLE CURRENT SOURCE FOR CIRCUIT BREAKER AND MOTOR OVERLOAD TESTING INSTRUCTION MANUAL PI-250B. Release 1.0 April 5, 2013
PORTABLE CURRENT SOURCE FOR CIRCUIT BREAKER AND MOTOR OVERLOAD TESTING INSTRUCTION MANUAL PI-250B Release 1.0 April 5, 2013 Electrical Test Instruments, Inc. 1301 Avondale Road, Suite J New Windsor, MD
More informationOSS - TN, TBN Type. Information to Order. Features. External View ATS(60~600A) OSS P- A B C D. Rated Current. D Operating Voltage
Information to Order A Rated Current 06 1 60A 100A 2 4 400A 6 600A B Type TN : TN-Type TBN : TBN-Type C Number of Poles 2 : 2P 3 : 3P 4 : 4P OSS - 6 - - P- A B C D D Operating Voltage A1 : AC 110V A2 :
More informationCIRCUIT PROTECTORS LOW VOLTAGE FUSES AIR CIRCUIT BREAKERS
CIRCUIT PROTECTORS LOW VOLTAGE FUSES AIR CIRCUIT BREAKERS Circuit protectors Circuit protectors Air circuit breakers Air circuit breakers AFaC and BaC types HRC fuses BLC, CR and CS types Super Rapid Fuses
More informationInstallation and Maintenance Instructions. World Leader in Modular Torque Limiters. PTM-4 Load Monitor
World Leader in Modular Torque Limiters Installation and Maintenance Instructions PTM-4 Load Monitor 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940) 723-7800 Fax: (940) 723-7888 E-mail: sales@brunelcorp.com
More informationMotor protective circuit breakers
Motor protective circuit breakers Motor protective circuit breakers MSP Description The MSP0, MSP1 motor starter protectors are compact motor starter protectors for currents up to 52 A which operate according
More informationApproved Standards. Motor Contactor. Main contactor. Accessoires. 21 Motor Contactor J7KN
Motor Contactor Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN rail) up to 45 kw Range from 4 to 110 kw (AC 3, 380/415V) Finger proof ( VBG 4) Accessoires
More informationProtectors. 35mm DIN rail snap-on mounting. Wide range of accessories
Manual motor protectors Manual motor protectors Manual motor Protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certified
More informationPage 2 DS LOW VOLTAGE POWER CIRCUIT BREAKERS Digitrip Trip Unit Inside Wiring Guide Outside Wiring Guide Shutter Drawout Unit Position Indicator Escut
Page 1 Supersedes Renewal Parts Data 33-790-1G pages 1-20 dated December, 1988 Mailed to: C, D, E/33-700 Westinghouse DS and DSL Low Voltage Power Circuit Breakers and Cell Parts Contents Pages DS Breaker
More informationMulti-purpose percentage restraint differential protection
Multi-purpose percentage restraint Page 1 Issued June 2002 Changed since June 1999 Data subject to change without notice (SE970169) Features Complete phase and earth fault protection for generators, motors,
More informationC 1. SPECTRONIC SP - Air circuit breakers. Summary. C2. General characteristics. C3. Fixed circuit breaker. C4. Withdrawable circuit breakers
SPETRONI SP - Air circuit breakers Summary 2. General characteristics 3. Fixed circuit breaker 4. Withdrawable circuit breakers 5. haracteristics 6. RV23: protection and control unit 6. RV+ : protection
More informationTechnical Information
C5 C5- C5- C5- C5- C5-550 ➊ 700 860 1000 1200 Rated Insulation Voltage U i to IEC 947-1 [V] 1000V 1000V 1000V 690V 690V UL/CS [V] 600V Rated Impulse Voltage U imp C5-550 / 700 / 860 [kv] 3.5 C5-1000 /
More informationSectionalizing. Rick Seeling. Pete Malamen. Introduction Philosophy. Three Phase Reclosers High-Side Protection Specific Applications
Sectionalizing Rick Seeling Introduction Philosophy Pete Malamen Three Phase Reclosers High-Side Protection Specific Applications History Early 1970 s Small Substation Transformers
More informationSECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
More informationSECTION MOTOR CONTROL
SECTION 26 24 19 MOTOR CONTROL PART 1 - GENERAL 1.1 SECTION INCLUDES A. Manual motor starters B. Magnetic motor starters C. Combination magnetic motor starters D. Solid-state reduced voltage motor starters
More information6300A 15 Optibreak B1 & B2 Optibreak B1 & B2 50/60 Hz Ue Icu [v] [ka] 415 65 690 40 4h 4i 1. Open / close Indication 2. Charge and Discharge Indicator 3. Release the reset button 4. Laser Nameplate
More informationSDM72 Start on Demand Modules
Capricorn Controls DA04SDM72-2 Revised Design Page 1 of 6 SDM72 Start on Demand Modules Genset Controls - Timers - Monitors - Trips - Battery Charging - Spares & Accessories - Custom Products Application
More informationC. Figure 1. CA-16 Front View Figure 2. CA-16 Rear View
Figure 1. CA-16 Front View Figure 2. CA-16 Rear View 2 2.1. Restraint Elements Each restraint element consists of an E laminated electromagnet with two primary coils and a secondary coil on its center
More informationPD-Series Ground Fault Circuit Protection
PD-Series Ground Fault Circuit Protection SmartGuard is an equipment ground fault protection device that functions as a standard high-quality Carling hydraulic/ magnetic circuit breaker, offering customized
More informationPRODUCT / TEST MANUAL 2C58K2 INSTANTANEOUS OVERCURRENT
Sheet 1 of 6 Order Number Serial Number PRODUCT / TEST MANUAL 2C58K2 INSTANTANEOUS OVERCURRENT Issue Date Level A 22/10/02 Initial issue. Summary of changes Due to RMS continuous product improvement policy
More informationDescriptive Bulletin. R-MAG TM magnetically actuated dead tank outdoor vacuum circuit breaker 15.5 kv - 38 kv
Descriptive Bulletin R-MAG TM magnetically actuated dead tank outdoor vacuum circuit breaker 15.5 kv - 38 kv Introduction The R-MAG TM is truly the next generation in medium voltage vacuum circuit breaker
More information