0.5mm and 1mm Pitch Connectors For FPC/FFC

Size: px
Start display at page:

Download "0.5mm and 1mm Pitch Connectors For FPC/FFC"

Transcription

1 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. 0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock) as compared to using 2 fingers and 39.2N to close a FF/FP connector from our competition. The Flip-Lock design also allows customers to place 2 or more connectors side by side as there is no need to waste additional board space for a side latch. 2. Strengthened Flip-lock ctuator The standard Flip-Lock requires only 2.0mm height above the board. strengthened lock lever is available which only requires an additional 0.mm. 3. Supports Thin FP (0.1mm) Hirose does not require double-sided FP to have any additional strengthening plate or stiffener and can therefore support a thickness of as little as 0.1mm +/ Hirose nsures Reliability Hirose s patented half tuning fork contacts maintain the required normal force without relying on the connector housing. With our competitor s conventional products the housing walls support the contact force, which does not provide for long-term reliability. 5. Prevention of Solder ridge xcess solder cavity absorbs excessive solder and avoids solder bridging.. Three different assembly types FH is offered in Top & ottom ontact and Vertical Mount and offered in both a 0.5mm contact pitch as well as a 1.0mm contact pitch (bottom contact only). Rotating One-touch Mechanism q w e pplications Notebook computers, printers, Ps, digital cameras and other compact devices for interconnecting the main circuit board with the L, H or other device.

2 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. Product Specifications Rating urrent rating: 0.5 (Note 1) Operating Temperature Range:_ to +70ç (Note 2) Storage Temperature Range:_ to +ç (Note 3) Voltage rating: V Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max. (Not dewed) (Not dewed) pplicable FP t=0.3±0.05 Gold plated t=0.1 ± 0.05 for FHF-*S-0.5SH Item Specification onditions 1. Insulation resistance 0M ohms minimum 0V 2. Withstanding voltage No flashover or insulation breakdown. 0V /1 minute 3. ontact resistance m ohms maximum 1m. urability (Insertion/withdrawal) ontact resistance: m ohms maximum No damage, cracks, or parts dislocation. cycles 5. Vibration No electrical discontinuity of 1µs or more Frequency: to 55 Hz, single amplitude of 0.75 mm, ontact resistance: m ohms maximum. No damage, cracks, or parts dislocation. 2 hours in each of the 3 directions.. Shock No electrical discontinuity of 1µs or more cceleration of 90 m/s 2, 11 ms duration, ontact resistance: m ohms maximum. No damage, cracks, or parts dislocation. sine half-wave waveform, 3 cycles in each of the 3 axis. ontact resistance: m ohms maximum. 7. Humidity(Steady state) Insulation resistance: M ohms minimum. 9 hours at ç and humidity of 90% to 95% No damage, cracks, or parts dislocation. ontact resistance: m ohms maximum. Temperature: -ç / to 35ç / 5ç / to 35ç,. Temperature ycle Insulation resistance: M ohms minimum. Time: / 5 max. / / 5 max.(minutes) No damage, cracks, or parts dislocation. 5 cycles No deformation of Reflow: t the recommended temperature profile 9.Resistance to Soldering heat components affecting performance. Manual soldering: 3±5ç for 3 seconds Note 1: When passing the current through all of the contacts,use 70% of the current rating. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation. Material Part Material Finish Remarks Insulator Polyamide, LP(0 pos.) olor : eige ctuator PPS olor : ark brown UL9V-0 ontact Phosphor bronze Gold plated Metal Fittings rass Tin plated Ordering Information FH - () - S SH (55) q w e r t y u i o q Series Name : FH t ontact alignment: Single w lank : standard type : Top contact type S : Type with strengthed flip-lock actuator y ccentric direction: lank : standard type : ccentric type F : Type with 0.1mm FP nd Thickness u ontacts Pitch : 0.5mm, 1mm e Standard type : of contacts i ontact type ccentric type : of contacts in 0.5mm housing SH : SMT horizontal mounting type r Standard type : lank SV : SMT vertical mounting type ccentric type : of contacts o Plating specification (55) : Gold plated 7

3 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. Series onfiguration Pitch ottom ontact Type Top ontact Type Vertical mounting Type 0.5mm FH- ** S-0.5SH P. of contacts,,, 11,,, 1,,,, 1, 19,,,,,, 2,,, 33, 3, 35,,, 5,, 53 FP conductive surface FP conductive surface (bottom side) Type with Strengthened Lock Lever FHS- ** S-0.5SH P. of contacts,, 5,, 53 Type with 0.1mm FP nd Thickness FHF- ** S-0.5SH P.1 of contacts,,,,, 1,,, 1,,,,,, 2,,, 3,, FH- ** S-0.5SH P. of contacts,,,, 1,,,,, 2, 29,,, 33, 3,,, 2, 5, FH- ** S-0.5SV P. of contacts,,,,,, 1,,,,,,, 33, 3,,, 5, 9,, 0 FP conductive surface (bottom side) 1mm Standard FH- ** S-1SH P.1 ccentric FH- ** (**) S-1SH Standard of contacts 5,, 7,, 9, 11,,,,, ccentric of contacts,,,, 11, 1, 19, FH- ** S-1SV P.19 of contacts, 7,,,,,

4 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. onnector Operating Instructions, precautions and recommendations ottom ontact Type (common for 0.5mm/1mm) Operation 1. FP/FF Termination procedure. onnector installed on the board. 1) Lift up the actuator. Use thumb or index finger. Precautions 1) void grasping the actuator with two fingers or lifting the actuator with fingernail. 2) o not use a thin tool such as the tip of a screwdriver to release the lock lever. oing so will cause deformation of the contacts. 3) o not apply force in the direction of arrows,, or while the lock lever is open. oing so will cause the lock lever to become disen gaged, or will damage the hook portion of the connector body. 2) Fully insert the FP/FF parallel to mounting surface, with the exposed conductive traces facing down. ) When inserting the FP/FF, do not forcefully rub against the surface beneath the connector insertion slot. oing so will result in the FP/FF forcefully striking the contacts and this will cause contact deformation, peeling of the FP/FF conductors, and other irregularities. FP/FF conductive traces 5) Insert the FP/FF at the proper position of the connector insertion slot, and insert perpendicularly with respect to the connector. Improper insertion will cause continuity problems, disengagement of the lock lever, and damage to the hook portion. 9

5 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. ottom ontact Type (common for 0.5mm/1mm) Operation 3) Rotate down the actuator until firmly closed. It is critical that the inserted FP/FF is not moved and remains fully inserted. Should the FP/FF be moved, open the actuator and repeat the process, starting with Step 1. Precautions ) Partial insertion of the FP/FF, offset insertion, and diagonal insertion will result in an unfavorable engagement of the lock lever in which the lock lever is raised. To correct this, first remove the FP/FF and then reinsert it. Forcing the lock will damage the connector. Stiffener 7) When locking, handle the FP/FF so that a load is not applied to the FP/FF as would occur by pulling the FP/FF, or lifting it, etc. When a load is applied in the opposite direction to the rotational movement of the lock, an excessive load will be applied and this will cause connector damage. 2. FP/FF Removal 1) Lift up the actuator. 2) arefully remove the FP/FF. ) t the time of lock operation, application of force such as that indicated by the arrows in the diagrams below will cause the lock lever to disengage. When the lock lever has become disengaged, please exchange the entire connector.

6 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. Top ontact Type Operation 1. FP/FF Termination procedure. onnector installed on the board. 1) Lift up the actuator. Use thumb or index finger. Precautions 1) void further lifting of the lock lever once the lock has been released. oing so will cause the lock lever to separate from the rotational shaft, and the lock lever will become disengaged or the hook portion of the connector body will be damaged. Lock lever Rotational shaft 2) Fully insert the FP/FF parallel to mounting surface, with the exposed conductive traces facing UP. FP insertion area FP/FF conductive traces 2) void further pressing of the lock portion from the locked condition when the FP/FF has not yet been inserted. oing so will cause the lock lever to become disengaged from the rotational shaft, and the hook portion of the connector body will be damaged. Stiffener 3) Rotate down the actuator until firmly closed. It is critical that the inserted FP/FF is not moved and remains fully inserted. Should the FP/FF be moved, open the actuator and repeat the process, starting with Step 1 above. 3) o not insert the FP/FF diagonally. oing so will result in the corners of the FP/FF catching on the contacts and will cause deformation of the contacts. 2. FP/FF Removal 1) Lift up the actuator. 2) arefully remove the FP/FF. ) When closing down the actuator apply equal pressure to both sides of the actuator. 11

7 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. Vertical Mounting Type Operation 1. FP/FF Termination procedure. onnector installed on the board. 1) Verify that the actuator is positioned upright. If the actuator has rotated to the side, carefully rotate it upright. ctuator upright Precautions 1) void forcing the actuator up or down without the FP/FF inserted. 2) Insert the FP/FF vertically in the connector slot assuring that the conductive traces of the FP/FF are facing away from the actuator. Stiffener FP/FF conductive traces 2) o not insert the FP/FF diagonally. oing so will result in the corners of the FP/FF catching on the contacts and will cause deformation of the contacts. Slot 3) Press down the actuator in the direction shown. 2. FP/FF Removal Rotate the actuator upward and withdraw the FP/FF.

8 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. 0.5mm Pitch ottom ontact Type (0.2) Mated ross-sectional iagram (.) FP/FF ontact Surface (2.1) (3.1) (1.3) Part L No. of ontacts RoHS FH-0S-0.5SH(55) FH-0S-0.5SH(55) FH-S-0.5SH(55) FH-11S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-1S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-1S-0.5SH(55) FH-19S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) YS FH-S-0.5SH(55) FH-S-0.5SH(55) Note 2 FH-2S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-33S-0.5SH(55) FH-3S-0.5SH(55) FH-35S-0.5SH(55) Note 2 Note 2 Note 2 Note 2 FH-S-0.5SH(55) FH-S-0.5SH(55) FH-5S-0.5SH(55) FH-S-0.5SH(55) FH-53S-0.5SH(55) Note 1 : mbossed tape reel packaging (2,000 pieces/reel). Order by number of reels. Note 2 : If there is no problem with the connector height, we recommend the type with the strengthened Flip-lock actuator (FHS-*S-0.5SH). Standard type connector height: 2 mm onnector height of type with strengthened Flip-lock actuator: 2. mm

9 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. 0.5mm Pitch ottom ontact Type with Strengthened Flip-lock ctuator ( 0.2) Mated ross-sectional iagram FP/FF ontact Surface ( 2.1) ( 3.1) ( 1.3 ) 2. (.) Part L No. of ontacts RoHS FHS-S-0.5SH(55) FHS-S-0.5SH(55) FHS-5S-0.5SH(55) YS FHS-S-0.5SH(55) FHS-53S-0.5SH(55) Note 1 mbossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 1

10 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. 0.5mm Pitch ottom ontact Type with 0.1mm FP nd Thickness 0.5 ( 0.2) pplicable FP end thickness : 0.1±0.05 Mated ross-sectional iagram FP ontact Surface ( 2.) ( 3.) ( 1.) 2 (. ) Part FHF-0S-0.5SH(55) L No of ontacts RoHS FHF-0S-0.5SH(55) FHF-S-0.5SH(55) FHF-S-0.5SH(55) FHF-S-0.5SH(55) FHF-1S-0.5SH(55) FHF-S-0.5SH(55) FHF-S-0.5SH(55) FHF-1S-0.5SH(55) FHF-S-0.5SH(55) FHF-S-0.5SH(55) YS FHF-S-0.5SH(55) FHF-S-0.5SH(55) FHF-S-0.5SH(55) FHF-2S-0.5SH(55) FHF-S-0.5SH(55) FHF-S-0.5SH(55) FHF-3S-0.5SH(55) FHF-S-0.5SH(55) FHF-S-0.5SH(55) Note 1 : mbossed tape reel packaging (2,000 pieces/reel). Order by number of reels.

11 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. 0.5mm Pitch Top ontact Type 0.5 (0.2) Mated ross-sectional iagram FP/FF ontact Surface (1.9) (1.5) 2 (1.5) (5) (0.5) (3.) 2 Part FH-S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-1S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-2S-0.5SH(55) FH-29S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-33S-0.5SH(55) FH-3S-0.5SH(55) FH-S-0.5SH(55) FH-S-0.5SH(55) FH-2S-0.5SH(55) FH-5S-0.5SH(55) FH-S-0.5SH(55) L No of ontacts Note 1 : mbossed tape reel packaging (2,000 pieces/reel). Order by number of reels. Note 2 : The design is such that the FP/FF protrudes on an upward angle so that other parts can be mounted beneath the PF/FF. In view of this, please take note of the gap at the top surface of the connector. RoHS YS

12 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. 0.5mm Pitch Vertical mounting Type Mated ross-sectional iagram ( 0.2 ) 1 ( 0.) FP/FF ontact Surface 1 F (.) ( 1.75) (.5) ( ) ) ( 0.5 Part FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-1S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-33S-0.5SV(55) FH-3S-0.5SV(55) FH-S-0.5SV(55) FH-S-0.5SV(55) FH-5S-0.5SV(55) FH-9S-0.5SV(55) FH-S-0.5SV(55) FH-0S-0.5SV(55) L No of ontacts F RoHS YS Note 1 : mbossed tape reel packaging (1,000 pieces/reel). Order by number of reels.

13 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. Recommended FP/FF dimensions and Land/Metal Mask dimensions 0.5mm Pitch Product FP/FF dimensions Land / Metal Mask dimensions 0.5mm Pitch ottom ontact Type 0.5mm Pitch Top ontact Type 3.5MIN 0.5±0.1 of ontacts ±0.05 ±0.05 ±0.07 of ontacts ±0.03(FP) 0.3±0.03(FF) Product Type Types other than 0.3±0.05min those below Stiffener thickness should be 0.1 mm (7.5 mil) min FHF 0.1± MIN Unit: mm ± ± ±0.1 of ontacts ± ±0.1 ±0.1 ± of ontacts ±0.03(Land) 0.±0.03(Metal mask) Recommended metal mask thickness : 0.mm Unit: mm ven contact number Odd contact number 2MIN 0.5± ± ±0.03(FP) 0.3±0.05 ±0.05 ± ±0.03(FF) 3MIN 1.±0.1 1.±0.1 ±0.1 0.±0.1(Land) 0.5±0.05(Metal mask) 1.5±0.1 No.1 contact 1.5±0.1.5±0.1 1.±0.1 1.±0.1 ±0.1 0.±0.1(Land) 0.5±0.05(Metal mask) No.1 contact 0.5±0.05 1± ±0.1(Land) 0.5± ±0.05(Metal mask) 1± ±0.1(Land) 0.5±0.05(Metal mask) 1±0.05 ±0.05 1±0.05 1±0.05 ±0.05 1± ± ±0.1.5± mm Pitch Vertical Mounting Type *Set the stiffener thickness to 0.1 (7.5mil) min. of ontacts 1 of ontacts Unit: mm of ontacts 1 Recommended metal mask thickness : 0.mm of ontacts Unit: mm

14 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. Packaging Specification mbossed arrier Tape s Horizontal Type (ommon to ottom/top ontact, 0.5mm/1mm Pitch) (2.0) Flat surface for placement with utomatic equipment 0.5mm Pitch ottom/top ontact Type of ontacts of ontacts Note: 2,000 pieces per reel. 1mm Pitch ottom ontact Type of ontacts of ontacts. 21. Standard Type Note: 2,000 pieces per reel. ccentric Type 2.

15 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. Vertical Mounting Type (ommon to 0.5mm/1mm Pitch) (1.75) Flat surface for placement with utomatic equipment 0.5mm Pitch Vertical mounting Type of ontacts. 21. of ontacts Note: 1,000 pieces per reel mm Pitch Vertical mounting Type of ontacts 7 2. Note: 1,000 pieces per reel. 23

16 ll non-rohs FH products Series 0.5mm have been discontinued, and or 1mm will be Pitch discontinued onnectors soon. Please check For the FP/FF products status on the Hirose website RoHS search at or contact your Hirose sales representative. Reel s (ommon to ll Types) (ø) ( : INSI) ( ) ( ) ( : OUTSI) nd portion Mounting portion Lead portion (0mm min.) lank portion ( pockets min.) mbossed carrier tape lank portion ( pockets min.) Top cover tape Recommended Temperature Profile Temperature (ç) Start 0 0ç ç (0 seconds) 90 to 0 seconds seconds Preheating Time 0 0ç Soldering MX 2ç 2ç HRS test conditions Solder method nvironment: Solder composition Test board Land dimensions Metal mask :Reflow, IR/hot air (Nihon en-netsu o., Ltd. s Part : SNSY NR-2) :Room air :Paste, 9.5%Sn/3%g/0.5%u (Senju Metal Industry, o., Ltd. s Part : M705-1M5-2-) :Glass epoxy mm 0mm 1.mm thick :Top and bottom contact type 0.3mm 1.3mm Vertical mounting type 0.mm 1.5mm :Top and bottom contact type 0.mm 1.3mm 0.mm thick Vertical mounting type 0.5mm 1.5mm 0.mm thick This temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. onsult your solder paste and equipment manufacturer for specific recommendations.

17 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website FH RoHS Series 0.5mm search at and 1mm Pitch or onnectors contact your Hirose For sales FP/FF representative. FH Series FP/FF onstruction (Recommended Specifications) 1. FF FF : Flexible Flat able Material Name Material Thickness (µm) (Nickel under plated / Gold plated), soft copper film dhesive Polyester type 35 Polyester dhesive Polyester type Stiffener Polyester type 1 (Note) Total 295 *Real tolerance of thickness dimension is on the order of ± µm (275 to 3 µm) Note: Use of a thicker FF results in a stiffer lock action and the lock is more easily released. factor that contributes to thicker FF is the use of 2 µm stiffener which is thicker than the standard (1 µm) product. This results in a total thickness of 357 µm. When using FF, control of FF thickness becomes easy if you indicate to us the thickness of the stiffener. 2. FP FP : Flexible Printed ircuit Material Name overing layer film over adhesive Material Polyimide 1 mil Thickness (µm) Nickel under plated 1to 5µm / Surface treatmenta 3 Gold plated 0.2µm opper foil ase adhesive ase film Reinforcement material adhesive Stiffener u 1oz 35 Polyimide 1 mil Heat-hardened adhesive Polyimide 7 mil 5 Total Precautions 1. This specification is a recommendation for the construction of the FH Series FP and FF (t=0.3 ±0.05). 2. For details about the construction, please contact the FP/FF manufacturers.

0.5mm and 1mm Pitch Connectors For FPC/FFC

0.5mm and 1mm Pitch Connectors For FPC/FFC 0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)

More information

0.5mm and 1mm Pitch Connectors For FPC/FFC

0.5mm and 1mm Pitch Connectors For FPC/FFC rawing for the most current and accurate design information. 0.5mm and mm Pitch onnectors For FP/FF FH Series Flip-lock Features. ase of Use and Space Savings Only one finger or.9n (Newtons) of force is

More information

0.5 mm and 1 mm Pitch FPC/FFC Connectors

0.5 mm and 1 mm Pitch FPC/FFC Connectors 0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

0.5mm and 1mm Pitch FPC/FFC Connectors

0.5mm and 1mm Pitch FPC/FFC Connectors 0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

0.5 mm and 1 mm Pitch FPC/FFC Connectors

0.5 mm and 1 mm Pitch FPC/FFC Connectors 0.5 mm and mm Pitch FP/FF onnectors FH Series pr..0 opyright 0 HIROS LTRI O., LT. ll Rights Reserved. Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate

More information

0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors

0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors .4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization

More information

0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC

0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables

More information

0.3 mm Pitch, 1.0 mm Height FPC Connector

0.3 mm Pitch, 1.0 mm Height FPC Connector 0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector

More information

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged

More information

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors 0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features

More information

0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector

0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector 0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single

More information

0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors

0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors 0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors FH19C Series/FH19SC Series FH19C FPC/FFC thickness: 0.2±0.0mm Actuator color: Brown Features 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization

More information

0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors

0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors .5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached

More information

0.6mm Pitch Stacking Height 3mm to 16mm Connectors

0.6mm Pitch Stacking Height 3mm to 16mm Connectors .6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking

More information

0.6mm Pitch Stacking Height 3mm to 16mm Connectors

0.6mm Pitch Stacking Height 3mm to 16mm Connectors .6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking

More information

0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions

0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions 0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The

More information

1mm Pitch Cable-to-Board Connectors supporting LVDS signal

1mm Pitch Cable-to-Board Connectors supporting LVDS signal NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:

More information

2mm Pitch Miniature Connector for HDD

2mm Pitch Miniature Connector for HDD ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.5mm Pitch SMT Board to Board Connector

0.5mm Pitch SMT Board to Board Connector All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.

More information

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB

More information

0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors

0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors 0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator Contacts are designed to hold and stabilize the actuator

More information

3.3 mm Contact Pitch, Connectors for Internal Power Supplies

3.3 mm Contact Pitch, Connectors for Internal Power Supplies . mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5

More information

2mm pitch, high reliability with lock, board to cable and cable to cable connector

2mm pitch, high reliability with lock, board to cable and cable to cable connector NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet

More information

Power Supply Connectors For Industrial Equipment

Power Supply Connectors For Industrial Equipment ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed) 2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive

More information

3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)

3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) .9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector

More information

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded

More information

1.25mm Pitch Super Low profile Crimping Connector

1.25mm Pitch Super Low profile Crimping Connector 1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height

More information

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is

More information

Low Profile Swing-Lock Board to Wire Connector for Power

Low Profile Swing-Lock Board to Wire Connector for Power Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure

More information

Low Profile Swing-Lock Board to Wire Connector for Power

Low Profile Swing-Lock Board to Wire Connector for Power Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth

More information

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) 7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent

More information

Power Supply Connectors For Industrial Equipment

Power Supply Connectors For Industrial Equipment Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small

More information

2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

2mm Double-Row Connector (Product Compliant to UL/CSA Standard) Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple

More information

DC to 6GHz Ultra-Small Coaxial Switch

DC to 6GHz Ultra-Small Coaxial Switch DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)

More information

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) 7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent

More information

0.5mm Pitch SMT Board-to-Board Connector

0.5mm Pitch SMT Board-to-Board Connector 0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of

More information

2.54mm Pitch Card Edge Connector

2.54mm Pitch Card Edge Connector 2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature

More information

I/O Card Interface Connectors

I/O Card Interface Connectors I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal

More information

Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)

Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on

More information

-Original Multi-purpose High-pin-count Miniature Waterproof Connectors

-Original Multi-purpose High-pin-count Miniature Waterproof Connectors -Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview

More information

CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications

CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization

More information

FAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm

FAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type

More information

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,

More information

0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors 0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth Features 1. Low-profile With the

More information

0.175 mm pitch ultra-low profile

0.175 mm pitch ultra-low profile 0.175 mm pitch ultra-low profile FP LIF back-lock onnector Upper ontact Type FF27 OUTLINE The FF27 series ultra-low profile FP LIF connector has a market leading height of only 0.66mm with a depth of just

More information

0.4 mm Contact Pitch, Board-to-FPC Connectors

0.4 mm Contact Pitch, Board-to-FPC Connectors 0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights

More information

Half-pitch and Multi-function Two Piece Connector

Half-pitch and Multi-function Two Piece Connector Half-pitch and Multi-function Two Piece Connector FX2 Series Sttacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various

More information

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch New Product XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated

More information

Miniature Waterproof Plastic Connectors

Miniature Waterproof Plastic Connectors NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter

More information

Low Profile Connectors for AC power supply

Low Profile Connectors for AC power supply Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together

More information

High Performance Miniature Circular Connectors

High Performance Miniature Circular Connectors High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together

More information

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated repairs. Hold-down

More information

M40-600/620 Connectors Specification

M40-600/620 Connectors Specification M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage

More information

0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors

0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors 0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE

More information

Gecko Connectors Introduction

Gecko Connectors Introduction Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability

More information

Design number. RC filtering circuit for USB interface

Design number. RC filtering circuit for USB interface hip R Networks hip R Networks Type: EZDLU n Features. Smallest SMD R/ filter for USB interface l Including 2 circuits of p type R/ filter in a chip (hip size:3.2 mm.6 mm ) l Space saving and low placing

More information

Dip and coded rotary switches

Dip and coded rotary switches Dip and coded rotary switches Section P (R) Low profile coted rotary, SMT or through-hole PT (R) oded rotary, through-hole DS/DSR Standard DIP DP/DPL Piano DIP D Right angle DIP IKN Low profile DIP, SMT

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 0.50mm ZIF FPC Connector, R/A, SMT Type Bottom Contact CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 6702K-XXXX-00,20,26X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT:

More information

Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.

Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical. onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts

More information

Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version

Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and

More information

Waterproof Circular Connectors

Waterproof Circular Connectors Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth

More information

High Current, Plastic Power Supply Connectors

High Current, Plastic Power Supply Connectors High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)

More information

Adam Technologies, Inc.

Adam Technologies, Inc. INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016

More information

Waterproof Circular Connectors

Waterproof Circular Connectors Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16

More information

PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)

PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.

More information

DSUBMINIATURE CONNECTOR J SERIES

DSUBMINIATURE CONNECTOR J SERIES D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses

More information

Dynamic Series Connectors

Dynamic Series Connectors 3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,

More information

125A High-Current Waterproof Connectors

125A High-Current Waterproof Connectors 125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure

More information

S J

S J 1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V

More information

Product Code Size Number of Type Characteristics Nominal Impedance Form Suffix Terminals. High Impedance Type. Low DCR Type

Product Code Size Number of Type Characteristics Nominal Impedance Form Suffix Terminals. High Impedance Type. Low DCR Type Type: /P N Features urst/radiation noise fi ltering for audio circuits The optimally magnetic-coupled ferrite beads allow for the fi ltering of both common and normal mode noises The strong multi-layer

More information

Product Compliant to DIN41612/IEC603-2 Standard

Product Compliant to DIN41612/IEC603-2 Standard Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type

More information

SFI Electronics Technology

SFI Electronics Technology 1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V

More information

0.5 mm Pitch FPC / FFC Connectors

0.5 mm Pitch FPC / FFC Connectors 0.5 mm Pitch FP / FF onnectors FF9 Series OUTLINE The FF9 series is a slider lock connector of the contact pitch 0.5mm. It suits FP/FF of 0.3mm thickness. APPLIATIONS Mobile Phones, Notebook omputers,

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1. SCOPE This specification covers the T-FLASH MEMORYCARD SOCKET series. 2. PRODUCT NAME AND PART NUMBER Product Name Part Number Assembly 49225-811 Embossed Package 49225-811 3. RATINGS Item Standard

More information

High Current, High Density, Power Connectors

High Current, High Density, Power Connectors High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection

More information

R Z18 Series : SMB CARLOCK

R Z18 Series : SMB CARLOCK .. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY

More information

Mini50 Unsealed Connector System 2.00mm Pitch

Mini50 Unsealed Connector System 2.00mm Pitch USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle

More information

HIGH VOLTAGE THICK FILM CHIP FIXED RESISTOR

HIGH VOLTAGE THICK FILM CHIP FIXED RESISTOR HIGH VOLTGE THIK FILM HIP FIXED RESISTOR 3000V Max Operating voltage 3000V Stable electrical capability, high reliability Superior mechanical and frequency characteristics ROHS ompliant with RoHS directive

More information

Single 2 Piece Contacts: BTB

Single 2 Piece Contacts: BTB Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years

More information

0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors

0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors 0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors FH55/FH55M Series Dimensions : 40 pos 4mm (depth) 23.4mm(FH55)/19.3mm(FH55M) Features 1. High-Speed Transmission(5 + Gbps)

More information

APPLICATION SPECIFICATION

APPLICATION SPECIFICATION 1.0 SCOPE This specification covers the requirements for the application of Mega-Fit 5.70 mm pitch wire to board connector systems. 2.0 PRODUCT NAME AND SERIES NUMBERS Mega-Fit Female Crimp Terminal 76823

More information

ENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD.

ENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD. TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 1.00mm Non-ZIF FPC Connector, R/A, SMT Type Dual CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 7182K-XXXN-00X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT: 7182K-XXXN-00X

More information

Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height

Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the

More information

(TRWL) Wire Wound Chip Ceramic Inductor

(TRWL) Wire Wound Chip Ceramic Inductor Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

More information

PolySwitch Resettable Devices Automotive Devices

PolySwitch Resettable Devices Automotive Devices PolySwitch Resettable evices utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive

More information

Current Sensing Resistor Metal Foil Type >SMF Series

Current Sensing Resistor Metal Foil Type >SMF Series Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power

More information

Power Inductors (IP Series)

Power Inductors (IP Series) Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &

More information

New Connectors For Low Profile Power Supply

New Connectors For Low Profile Power Supply NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed

More information

SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)

SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS - 87151-XXX9 REVISION: D PRODUCT NAME:

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE

More information

M300 Connectors Introduction

M300 Connectors Introduction ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male

More information