UK Purchased. TRWA Rotation* 929 (2053) Compression Ratio. 15.7:1 Displacement l (cu. in.)
|
|
- Dora Nicholson
- 6 years ago
- Views:
Transcription
1 MODELS FIRE PUMP ENGINES JW6H-AP30 JW6H-AP40 JW6H-AP50 JW6H-AP60 UK Purchased APSAD ENGINE MODELS GROSS POWER RATINGS KW/BHP JW6H MODEL AP30 AP40 AP50 AP RATED SPEED Power Rating: A 20% deduction in power must be made to determine the maximum allowable pump load. Also, maximum engine speed is limited to 90% of maximum speed indicated on engine power curve. SPECIFICATIONS ITEM AP30 JW6H MODELS AP40/50/60 Number of Cylinders 6 Aspiration TJWA TRWA Rotation* CW Weight kg (lb) 910 (2012) 929 (2053) Compression Ratio 16.5:1 15.7:1 Displacement l (cu. in.) 8.1 (496) Engine Type 4 Stroke Cycle Inline Bore & Stroke mm ( in.) 116 x 127 (4.56 x 5.06) Installation Drawing UD133 Engine Series John Deere 6081 Series Abbreviations: CW Clockwise TJWA Turbocharged with Jacket Water Aftercooling TRWA Turbocharged with Raw Water Aftercooling *Rotation viewed from Heat Exchanger Front of Engine CERTIFIED POWER RATING Each engine is factory tested to verify power and performance. Although power ratings are shown at specific speeds, Clarke engines can be applied at any intermediate speed. To determine the intermediate speed power; make a linear interpolation from the Clarke power curve. Contact Clarke or your Pump OEM Representative to obtain details. ENGINE RATINGS BASELINES Engines are not to be used for continuous duty. Engines are to be used only for stationary emergency standby fire pump service. Engines are rated at standard SAE conditions of in. (752.1 mm) Hg barometer and 77 F (25 C) inlet air temperature [approximates 300 ft. (91.4 m) above sea level] by the testing laboratory (see SAE Standard J 1349). A deduction of 3 percent from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000 ft. (305 m) altitude above 300 ft. (91.4 m) A deduction of 1 percent from engine horsepower rating as corrected to standard SAE conditions shall be made for diesel engines for every 10 F (5.6 C) above 77 F (25 C) ambient temperature. Page 1 of 8
2 MODELS FIRE PUMP ENGINES JW6H-AP30 JW6H-AP40 JW6H-AP50 JW6H-AP60 ENGINE EQUIPMENT EQUIPMENT Air Cleaner Alternator Coupling Engine Speed Control Exhaust Protection Exhaust Flex Connection Flywheel Housing Flywheel Power Take Off Fuel Connections Fuel Filter Fuel Injection System Fuel Lift Pump Engine Heater Governor, Speed Heat Exchanger Instrument Panel Junction Box Lube Oil Cooler Lube Oil Filter Lube Oil Pump Lube Oil Sump Pump Manual Start Control Raw Water Solenoid Operation Run Stop Control Run Solenoid Spares Starters Switches STANDARD Direct Mounted, Washable, Indoor Service with Drip Shield Bare Flywheel Mechanical type, governing within 5% of rated speed at any load condition Blankets on Manifolds and Turbocharger Stainless Steel Flexible Bellows; Clamped, 5 on JW6H-AP30/40; Clamped, 6 on JW6H-AP50/60 SAE # SAE Industrial Flywheel Connection Primary Filter with Priming Pump Bosch Direct Injection, Inline Mechanical 240V-AC, 1000 Watt Constant Speed, Mechanical Tube and Shell Type; 14 BAR (203 PSI), BSP(F) Connections for JW6H-AP30; 5 BAR (72.5 PSI), BSP(F) Connections for JW6H-AP40/50/60 Engine Water Cooled, Plate Type Full Flow with By-Pass Valve Gear Driven, Gear Type Manual Pump Energized to Stop with Manual Stop Lever 12V-DC Energized to Stop Hoses and Clamps for Heat Exchanger, One (1) Oil Filter, One (1) Fuel Filter, One (1) Drive Belt, One (1) Injector One (1) 12V-DC Low Oil Pressure; High Water Temperature OPTIONAL Disposable, Drip Proof, Indoor Service Outdoor Type 12V-DC, 42 Amps with Belt and Guard; 24V-DC, 40 Amps with Belt and Guard Centaflex, Model CFA80; Driveshaft Flexible Rubber Hoses Rated for Diesel Fuel, Supply and Return Lines English and Metric, Tachometer, Hourmeter, Water Temperature, Oil Pressure Integral with Instrument Panel; For DC Wiring Interconnection to Fire Pump Controller On Instrument Panel Automatic from Fire Pump Controller On Instrument Panel 24V-DC Energized to Stop One (1) 24V-DC Throttle Control Adjustable Speed Control, Tamper Proof Water Pump Centrifugal Type Abbreviations: DC Direct Current, AC Alternating Current, SAE Society of Automotive Engineers, BSP(F) British Standard Pipe Thread (Female) UK, Ltd. Grange Works, Lomond Rd., Coatbridge, ML5-2NN United Kingdom Tel Fax Fire Protection Products, Inc E. Kemper Rd., Cincinnati, Ohio United States of America Tel FIRE (3473) Fax C revd 07OCT10 Specifications and information contained in this brochure subject to change without notice. Page 2 of 8
3 315 FIRE PUMP MODEL: JW6H-AP60 Heat Exchanger Turbocharger Raw Water Charge Air Cooling (412) (408) 303 (406) (398) (396) 295 (396) RESTRICTED: ENGINE SPEED - RPM USE ONLY FOR STAND-BY FIRE PUMP APPLICATIONS (LESS THAN 30 HOURS OF OPERATION PER YEAR) ENGINE PERFORMANCE: IN ACCORDANCE WITH SAE J1349 AND ISO 3046 ICN BASED UPON STANDARD CONDITIONS: 100kPa (29.6"Hg) ATMOSPHERIC PRESSURE 25 C (77 F) AIR INLET TEMPERATURE 91m (300ft) ALTITUDE BASED UPON #2 (ASTM D-975) OR BS 2869 CLASS A2 "RED" DIESEL FUEL KEN WAULIGMAN 28DEC04 GROSS kw (BHP) THIS DRAWING AND THE IN- FORMATION HEREIN ARE OUR PROPERTY AND MAY BE USED BY OTHER ONLY AS AUTHORIZED BY US. UNPUBLISHED -- ALL RIGHTS RESERVED UNDER THE COPYRIGHT LAWS. CREATED DRAWING NO. DATE CREATED 09/10/04 ENGINE MODEL JW6H-AP60 C REV B Page 3 of 8
4 JW6H-AP60 INSTALLATION & OPERATION DATA (I&O Data) UK Produced Basic Engine Description Engine Manufacturer John Deere Co. Ignition Type Compression (Diesel) Number of Cylinders 6 Bore and Stroke - mm (in) 116 (4.56) X 129 (5.06) Displacement - L (in³) 8.1 (496) Compression Ratio 15.7:1 Valves per cylinder Intake 1 Exhaust 1 Combustion System Direct Injection Engine Type In-Line, 4 Stroke Cycle Fuel Management Control Mechanical, Inline Pump Firing Order (CW Rotation) Aspiration Turbocharged Charge Air Cooling Type Raw Water Cooled Rotation, viewed from front of engine, Clockwise (CW) Standard Engine Crankcase Vent System Open Installation Drawing UD133 Weight - kg (lb) 909 (2003) Power Rating Gross Power - kw (HP) [1] 295 (396) 308 (412) 295 (396) Cooling System - [C05804] Engine Coolant Heat - kw (Btu/sec) 168 (159) 208 (197) 217 (206) Engine Radiated Heat - kw (Btu/sec) 40.1 (38) 42.2 (40) 40.1 (38) Heat Exchanger Minimum Flow 15 C (60 F) Raw H L/min (gal/min) 155 (41) 167 (44) 167 (44) 35 C (95 F) Raw H L/min (gal/min) 170 (45) 178 (47) 178 (47) Heat Exchanger Maximum Cooling Raw Water Inlet Pressure - bar (psi) 5 (72) Flow - L/min (gal/min) 303 (80) Typical Engine H 2 0 Operating Temp - C ( F) [2] 82.2 (180) (195) Thermostat Start to Open - C ( F) 82.2 (180) Fully Opened - C ( F) 94.4 (202) Engine Coolant Capacity - L (qt) 22 (23.24) Coolant Pressure Cap - kpa (lb/in²) 68.9 (10) Maximum Engine Coolant Temperature - C ( F) 93.3 (200) Minimum Engine Coolant Temperature - C ( F) 71.1 (160) High Coolant Temp Alarm Switch - C ( F) 96.1 (205) Electric System - DC Standard Optional System Voltage (Nominal) Battery Capacity for Ambients Above 0 C (32 F) Voltage (Nominal) 12 [C07634] 24 [C07634] Qty. Per Battery Bank 1 1 SAE size per J537 4D 4D -18 C (0 F) Reserve Capacity - Minutes Battery Cable Circuit, Max Resistance - ohm Battery Cable Minimum Size 0-3.1m Circuit Length [3] m-4.1m Circuit Length [3] m-5.1m Circuit Length [3] Charging Alternator Maximum Output - Amp, 40 [C071363] 55 [C071366] Starter Cranking Amps, Rolling C (60 F) 350 [C071072] 167 [C071074] NOTE: This engine is intended for indoor installation or in a weatherproof enclosure. 1 Reduce published Gross kw's by 10% to determine maximum pump load. 2 Engine H 2 O temperature is dependent on raw water temperature and flow. 3 Positive and Negative Cables Combined Length. Page 1 of 2 Page 4 of 8
5 JW6H-AP60 INSTALLATION & OPERATION DATA (I&O Data) UK Produced Exhaust System Exhaust Flow - m³/min (ft.³/min) 55.7 (1968) 65 (2297) 68.5 (2418) Exhaust Temperature - C ( F) 483 (902) 456 (853) 434 (813) Maximum Allowable Back Pressure - kpa (in H 2 0) 6.5 (26) 7 (28) 7.5 (30) Minimum Exhaust Pipe Dia. - mm (in) [4] 152 (6) 152 (6) 152 (6) Fuel System Fuel Consumption - L/hr (gal/hr) 62.5 (16.5) 66.2 (17.5) 66.2 (17.5) Fuel Return - L/hr (gal/hr) 237 (62.5) 235 (62) 233 (61.5) Fuel Supply - L/hr (gal/hr) 299 (79) 301 (79.5) 299 (79) Fuel Pressure - kpa (lb/in²) 172 (25) (35) Minimum Line Size - Supply - in..50 Schedule 40 Steel Pipe Pipe Outer Diameter - mm (in) 21.5 (0.848) Minimum Line Size - Return - in..375 Schedule 40 Steel Pipe Pipe Outer Diameter - mm (in) 17.1 (0.675) Maximum Allowable Fuel Pump Suction Lift with clean Filter - mh 2 0 (in H 2 0) 0.8 (31) Maximum Allowable Fuel Head above Fuel pump, Supply or Return - m (ft) 2.7 (9) Fuel Filter Micron Size 5 Heater System Standard Engine Coolant Heater Wattage (Nominal) 1000 Voltage - AC, 1 Phase 220 (+5%, -10%) Part Number [U124252] Air System Combustion Air Flow - m³/min (ft.³/min) 22.1 (780) 26.6 (939) 28.9 (1020) Air Cleaner Standard Optional Part Number [C03244] [C03330] Type Indoor Service Only, with Shield Canister, Single-Stage Cleaning method Washable Disposable Air Intake Restriction Maximum Limit Dirty Air Cleaner - kpa (in H 2 0) 3.5 (14) 3.5 (14) Clean Air Cleaner - kpa (in H 2 0) 1.7 (7) 1.7 (7) Maximum Allowable Temperature (Air To Engine Inlet) - C ( F) [5] 54.4 (130) Lubrication System Oil Pressure - normal - kpa (lb/in²) 241 (35) (55) Low Oil Pressure Alarm Switch - kpa (lb/in²) 138 (20) In Pan Oil Temperature - C ( F) 87.8 (190) (220) Total Oil Capacity with Filter - L (qt) 28.5 (30.1) Lube Oil Heater Optional Wattage (Nominal) 150 Voltage 240V (+5%, -10%) Part Number C04431 Performance BMEP - kpa (lb/in²) 2480 (359) 2160 (313) 1850 (269) Piston Speed - m/min (ft/min) 452 (1484) 540 (1771) 604 (1982) Mechanical Noise - 1m Consult Factory Power Curve C Based on Nominal System. Back pressure flow analysis must be done to assure maximum allowable back pressure is not exceeded. (Note: minimum exhaust Pipe diameter is based on: 15 feet of pipe, one 90 elbow, and a silencer pressure drop no greater than one half of the maximum allowable back pressure.) 5 Review for horsepower derate if ambient air entering engine exceeds 77 F (25 C). [ ] indicates component reference part number. Page 2 of 2 C Rev D LDE 10NOV10 Page 5 of 8
6 CLARKE JDFP-06WA, -06WR ENGINE MATERIALS AND CONSTRUCTION Fire Protection Products Air Cleaner Type... Indoor Usage Only Oiled Fabric Pleats Material... Surgical Cotton Aluminum Mesh Air Cleaner - Optional Type... Canister Material... Pleated Paper Housing... Enclosed Camshaft Material... Cast Iron Chill Hardened Location... In Block Drive... Gear, Spur Type of Cam... Ground Charge Air Cooler Type... Jacket Water Cooled - 06WA Raw Water Cooled - 06WR Materials (06WR)... (In Contact with Raw Water) Tubes... 90/10 CU/NI Headers Muntz Covers Red Brass Plumbing Stainless Steel Brass 90/10 CU/NI Silicone Coolant Pump Type... Centrifugal Drive... Gear Coolant Thermostat Type... Full Blocking Qty... 2 Connecting Rod Type... I-Beam Taper Top Material... Forged Steel Alloy Crank Pin Bearings Type... Precision Half Shell Number... 1 Pair Per Cylinder Material... Wear-Gard Crankshaft Material... Forged Steel Type of Balance... Dynamic Cylinder Block Type... One Piece With Non-Siamese Cylinders Material... Cast Iron Alloy Cylinder Head Type... Slab 2 Valve Material... Cast Iron Cylinder Liners Type... Centrifugal Cast Wet Liner Material... Alloy Iron Plateau Honed Valves Type... Poppet Arrangement... Overhead Valve Number/Cylinder... 1 Intake... 1 Exhaust Operating Mechanism... Mechanical Rocker Arm Type of Lifter... Large Head Valve Seat Insert... Replaceable Fuel Pump Type... Piston Drive... Cam Lobe Heat Exchanger Type... Tube & Bundle Materials Tubes & Headers... 80/20 CU/NI Shell... Copper Electrode... Zinc Injection Pump Type... In-Line Drive... Gear Lubrication Cooler Type... Plate Lubrication Pump Type... Gear Drive... Gear Main Bearings Type... Precision Half Shells Material... Steel Backed-Aluminum Lined Piston Type and Material... Aluminum Alloy With Reinforce Top Ring Groove Cooling... Oil Jet Spray Piston Pin Type... Full Floating - Offset Piston Rings Number/Piston... 3 Top... Keystone Barrel Faced - Plasma Coated Second... 1/2" Third... Chromium Faced CDDA AUG 98 JTW Page 6 of 8 Page 43-Z-5
7 Page 7 of 8
8 Page 8 of 8
FIRE PUMP MODEL: JW6H-UF50 Heat Exchanger Cooled RE Turbocharger Raw Water Charge Cooling ENGINE SPEED - RPM
380 FIRE PUMP MODEL: JW6H-UF50 Heat Exchanger Cooled RE505257 Turbocharger Raw Water Charge Cooling 360 350 (261) 340 340 (254) 320 300 300 (224) 280 260 1700 1800 1900 2000 2100 2200 2300 RESTRICTED:
More informationMODELS KA4H-UFKA24. FM-UL-cUL APPROVED RATINGS KW/BHP SPECIFICATIONS KA4H MODELS FIRE PUMP ENGINES RATED SPEED KA4H MODEL UFKA24 ITEM
MODELS KA4H-UFKA24 FIRE PUMP ENGINES FM-UL-cUL APPROVED RATINGS KW/BHP KA4H MODEL RATED SPEED 2800 3000 KA4H-UFKA24 45 34 45 34 = Non-Emissionized SPECIFICATIONS KA4H MODELS ITEM UFKA24 Number of Cylinders
More informationCLARKE FIRE PUMP DRIVERS. approved. listed PDFP SERIES MODELS PDFP-L6YN PDFP-L6YW PDFP-06YT PDFP-L4YN PDFP-K6YT PDFP-06YR. meets NFPA-20 Requirements
CLARKE FIRE PUMP DRIVERS PDFP-L4YN PDFP-04YT PDFP SERIES MODELS PDFP-L6YN PDFP-L6YW PDFP-06YT PDFP-K6YT PDFP-06YR APPROVED RATINGS BHP/kw FM-UL-ULC PDFP MODEL L4YN 04YT L6YN 06YT L6YW SPEED (RPM) 45 60
More informationCLARKE FIRE PUMP DRIVERS. approved MODELS. meets NFPA-20 Requirements VMFP-04HN VMFP-04HT VMFP-06HT VMFP-T6HT VMFP-L6HR VMFP-T6HR
CLARKE FIRE PUMP DRIVERS MODELS VMFP-04HN VMFP-04HT VMFP-06HT VMFP-T6HT VMFP-L6HR VMFP-T6HR APPROVED RATINGS (BHP)/(kw) FM-UL* VMFP MODEL 04HN 04HT 06HT T6HT L6HR T6HR OPERATING SPEED (RPM) 2800 3000 3300
More information(NSPS) Available until
FIRE PUMP ENGINES JW6H-UFADF0 JW6H-UFADJ0 JW6H-UFAD70 MODELS JW6H-UFAD80 JW6H-UFAA60 JW6H-UFAA80 FM-UL-cUL APPROVED RATINGS BHP/KW JW6H MODEL RATED SPEED 1760 1900 2100 2350 US-EPA (NSPS) Available until
More informationENGINE EQUIPMENT. For DC Wiring Interconnection To Alternator (S) 24V-DC, 40 Ampere, Engine Controller with Belt Guard
CLARKE FIRE PUMP DRIVERS MODELS DDFP-08FH DDFP-08FA DDFP-12FH APPROVED RATINGS BHP/kw FM-UL-ULC* SPEED (RPM) MODEL 1470 1760 2100 2350 DDFP- 420 509 552 570 08FA 313 380 412 425 DDFP- 468 575 669 708 08FH
More informationCLARKE FIRE PUMP DRIVERS. approved. listed MODELS. meets NFPA-20 Requirements
CLARKE FIRE PUMP DRIVERS Air Cleaner Direct Mounted, Washable, For Indoor Service Only Alternator Integral Regulator, 24V-DC, 40 Ampere, with Belt Guard Cooling Water Control Automatic At Local Control
More information(NSPS) Available Until
FIRE PUMP ENGINES MODELS JU6H-UFADMG JU6H-UFADP0 JU6H-UFADR0 JU6H-UFADT0 JU6H-UFAD58 JU6H-UFADP8 JU6H-UFADR8 JU6H-UFADW8 JU6H-UFADNG JU6H-UFADQ0 JU6H-UFADS8 JU6H-UFADX8 JU6H-UFADM8 JU6H-UFADN0 JU6H-UFAD88
More informationSPECIFICATIONS. FM-UL-cUL APPROVED RATINGS BHP/KW FIRE PUMP ENGINES JU6R- RATED SPEED UFAA MODEL JU6R-UFAA MODELS ITEM
FIRE PUMP ENGINES MODELS JU6R-UFAAD9 JU6R-UFAA33 JU6R-UFAAL1 JU6R-UFAA57 JU6R-UFAA67 JU6R-UFAAQ7 JU6R-UFAAD1 JU6R-UFAAG7 JU6R-UFAAM7 JU6R-UFAA49 JU6R-UFAA59 JU6R-UFAARF JU6R-UFAA29 JU6R-UFAAL7 JU6R-UFAAM9
More informationFM-UL-cUL APPROVED RATINGS BHP/KW SPECIFICATIONS JU6H MODELS ITEM FIRE PUMP ENGINES JU6H MODEL (NSPS) Available Until
FIRE PUMP ENGINES MODELS JU6H-UFADMG JU6H-UFADP0 JU6H-UFADR0 JU6H-UFADT0 JU6H-UFAD58 JU6H-UFADP8 JU6H-UFADR8 JU6H-UFADW8 JU6H-UFADNG JU6H-UFADQ0 JU6H-UFADS8 JU6H-UFADX8 JU6H-UFADN0 JU6H-UFAD88 JU6H-UFADS0
More informationUK Purchased. FM-UL-cUL APPROVED RATINGS KW/BHP SPECIFICATIONS FIRE PUMP ENGINES RATED SPEED MODEL JU4H
FIRE PUMP ENGINES UK Purchased MODELS JU4H-UF04 JU4H-UF14 JU4H-UF24 JU4H-UFH2 JU4H-UF50 JU4H-UF10 JU4H-UF20 JU4H-UF34 JU4H-UF40 JU4H-UF52 JU4H-UF12 JU4H-UF22 JU4H-UFH0 JU4H-UF42 JU4H-UF54 FM-UL-cUL APPROVED
More informationFM-UL-cUL APPROVED RATINGS BHP/KW SPECIFICATIONS FIRE PUMP ENGINES. US-EPA (NSPS) Available Until RATED SPEED JU4H MODEL
FIRE PUMP ENGINES MODELS JU4H-UF12 JU4H-UF22 JU4H-UF30 JU4H-UFH8 JU4H-UF40 JU4H-UF50 JU4H-UF14 JU4H-UFAB26 JU4H-UF32 JU4H-UFH0 JU4H-UF42 JU4H-UF52 JU4H-UF10 JU4H-UF20 JU4H-UF24 JU4H-UF34 JU4H-UFH2 JU4H-UF58
More information(NSPS) Available Until
FIRE PUMP ENGINES JU4H-UFAD5G JU4H-UFADP0 JU4H-UFADR0 MODELS JU4H-UFADW8 JU4H-UFADY8 JU4H-UFAD98 FM-UL-cUL APPROVED RATINGS BHP/KW JU4H MODEL RATED SPEED 1760 2100 2350 2400 US-EPA (NSPS) Available Until
More informationare to be tested in accordance with NFPA 25. applied at any intermediate speed. To determine the intermediate speed
FIRE PUMP ENGINES FM-UL-cUL APPROVED RATINGS BHP/KW JU6H MODEL RATED SPEED 1470 1760 2100 2350 2600 2800 3000 JU6H-UFD0 JU6H-UF34 JU6H-UFABL2 JU6H-UF58 JU6H-UFAB76 JU6H-UFAAQ8 JU6H-UFD2 JU6H-UFG8 JU6H-UFM8
More informationare to be tested in accordance with NFPA 25. applied at any intermediate speed. To determine the intermediate speed
FIRE PUMP ENGINES FM-UL-cUL APPROVED RATINGS BHP/KW JU6H MODEL RATED SPEED 1470 1760 2100 2350 2600 2800 3000 JU6H-UFD0 JU6H-UF34 JU6H-UFABL2 JU6H-UF58 JU6H-UFAB76 JU6H-UFAAQ8 JU6H-UFD2 JU6H-UFG8 JU6H-UFM8
More informationPRESSURE LIMITING DRIVERS
PLDTMFIRE PUMP ENGINES PRESSURE LIMITING DRIVERS SERIES JU4H JW6H JU6H JX6H PLD Models for Discharge & Suction Pressure Limiting Control FM-UL-cUL APPROVED RATINGS BHP/kW Certified Models NSPS Emissions
More informationPRESSURE LIMITING DRIVERS
PLD Models for Discharge & Suction Pressure Limiting Control FM-UL-cUL APPROVED RATINGS BHP/kW Certified Models NSPS Emissions Tier Engine Fuel Management Control Discharge Control Limiting Pressure (psi)
More informationPRESSURE LIMITING DRIVERS. PLD Models for Discharge & Suction Pressure Limiting Control FM-UL-cUL APPROVED RATINGS BHP/kW
PLDTMFIRE PUMP ENGINES PRESSURE LIMITING DRIVERS SERIES JU4H JW6H JU6H JX6H PLD Models for Discharge & Suction Pressure Limiting Control FM-UL-cUL APPROVED RATINGS BHP/kW Certified Models NSPS Emissions
More informationEngine Specification Sheet
Engine Specification Sheet Basic Engine Model Cummins Fire Power CFP6E-F35, F25, F15 DePere, WI 54115 Curve Number: FR - 90847 http://www.cumminsfirepower.com Revision Date: August 2006 Equipment Standard
More informationFire Pump Drivers MODEL: CFP8E Series
Fire Pump Drivers MODEL: CFP8E Series Air Cleaner - Alternator - Exhaust Protection - Exhaust Flex Connection - lywheel Power Take Off - ENGINE EQUIPMENT (S) Direct Mounted, Disposable, Indoor Service
More informationEngine Specification Sheet
Engine Specification Sheet Basic Engine Model Cummins Fire Power CFP11E- F20 De Pere, WI 54115 Curve Number: FR - 20091 http://www.cumminsfirepower.com Revision Date: June 2014 Equipment Air Cleaner Standard
More information- This symbol on the nameplate means the product is 6CTA8.3-F LISTED AGENCY RATINGS
6CTA8.3-F FIRE PUMP ENGINE SPECIFICATIONS Four Stroke Cycle, Turbocharged-Aftercooled, In-Line, 6 Cylinder Diesel Engine,'-- Bore and Stroke 4.49 x 5.32 in. (1 14x135 mm) LISTED AGENCY RATINGS 300 HP 8
More informationENGINE PERFORMANCE CURVE M1-158 hp ( rpm
Rating: ENGINE PERFORMANCE CURVE M1-158 hp (118 kw) @ 0 rpm PowerTech 6.8 L Engine Model: 6068TFM75 Application: Marine (Propeller Power is approximately 97% of Crankshaft Power) Power -- hp (kw) (179)
More informationENGINE PERFORMANCE CURVE M3-135 hp ( rpm M2-120 hp ( rpm
Rating: Application: ENGINE PERFORMANCE CURVE M3-135 hp (11 kw) @ 25 rpm M2-12 hp (9 kw) @ rpm Marine POWERTECH.5 L Engine Model: 5TFM5 [Option 16HP / 16HQ]* (179) 339 lb-ft (6 N m) (52) 32 (3) (1) Torque
More informationPRELIMINARY. Engine Speed Standby Power Prime Power Continuous Power. RPM kwm BHP kwm BHP kwm BHP. Litre / hour
Cummins Inc. Columbus, Indiana 47201 Engine Data Sheet Basic Engine Model: 1-G8 Engine Critical Parts List: CPL: 2816 Curve Number: FR-10302 Date: 3Oct01 1 Displacement : 1 liter (912 in 3 ) Bore : 137
More informationEngine Performance 1500 RPM
CUMMINS ENGINE COMPANY, INC Columbus, Indiana 471 ENGINE PERFORMANCE CURVE Basic Engine Model: QST-G3 Engine Critical Parts List: CPL: 284 Curve Number: FR-188 Date: 23Dec3 Q 1 Displacement :.48 liter
More informationPower Rating Minimum Power 218 bkw 292 bhp Maximum Power 359 bkw 482 bhp mm (5.4 in) mm (6.5 in)
The Cat 3406C Diesel Fire Pump Engine is offered in ratings ranging from 218-359 bkw (292-482 bhp) @ 1750-2300 rpm. These ratings are non-certified and available for global non-regulated areas. They are
More informationTECHNICAL DATA DEPT. CERTIFIED WITHIN 5% CHIEF ENGINEER
CUMMINS ENGINE COMPANY, INC Columbus, Indiana 47202-3005 Engine Performance Curve Basic Engine Model: Curve Number: 6CTA8.3 FR2-9626 Engine Family: CPL Code: Date: D41 1366 18Apr95 13 Displacement: 504.5
More informationCUMMINS ENGINE COMPANY, INC. Engine Data Sheet
CUMMINS ENGINE COMPANY, INC. Engine Data Sheet Firepump Pg. No. F 43 Engine Model: FIRE PUMP NTTA855-F BIG CAM Data Sheet: FR-1373 Gross Power BHP (kw): 481 (359) @ 2100 Date: 08Mar95 Configuration Number:
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationMODEL PERFORMANCE. ENGINE MOUNTING Maximum Bending Moment at Rear Face of Block... lb ft (N m) 1000 (1356)
CPL INSTALLATION DIAGRAM Engine: Engine With Radiator : GENERAL DATA Type... 4 Cycle; In-line; 6 Cylinder Diesel Aspiration... Turbocharged and Air to Air Aftercooled Bore x Stroke... in x in (mm x mm)
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Fire Pump Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More information3508 Industrial Engine
FEATURES Image shown may not reflect actual engine CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged
More informationThe enginewithintegrated water cooling
1500 RPM 400/230 V 50 Hz Type IDGPC 45JD 45 /36 kva/kw (PRP) 49.5 /39.6 kva/kw (LTP) The enginewithintegrated water cooling 45kVA/36kW Johndeere diesel engine generator with ISO and CE certificate Engine:
More information3512 Industrial Engine
CAT ENGINE SPECIFICATIONS V-12, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 51.8 L (3,161.03 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More information3516 Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More informationTriton 80kW. Standy Rating: Triton 80kW. Triton Power Corp 8511 NW 61st Street Miami, FL T: F:
Triton 80kW Standy Rating: Triton 80kW Triton Power Corp 8511 NW 61st Street Miami, FL 33166 T: 305-592-6800 F: 305-592-5900 www.tritonpower.com Cummins Inc. Columbus, Indiana 47201 Engine Data Sheet Basic
More informationMarine Propulsion 3126
Marine Propulsion 3126 SPECIFICATIONS 22 bkw @ rpm bhp @ rpm Shown with Accessory Equipment STANDARD ENGINE EQUIPMENT Air Inlet System 12V air inlet heater, sea water aftercooler, air cleaner/fumes disposal,
More informationMITSUBISHI DIESEL ENGINE IFM NO. JN (1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002
DIESEL ENGINE IFM NO. JN02411-011(1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002 TITLE Specification Sheets of S6U-MPTK Engine (IMO Certified Engine) Specification Sheets of S6U-MPTK Engine that is satisfied
More information@Perkins. Technical Data. 1106D-E66TAG3 159, rev/min. 1100D Series. ElectropaK
Technical Data 1100D Series ElectropaK Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement............................................ In-Line
More information1506A-E88TAG5. Series. 293 kwm 1500 rpm 333 kwm 1800 rpm. Basic technical data
1506A-E88TAG5 293 kwm standby @ 1500 rpm 333 kwm standby @ 1800 rpm 1500 Series Basic technical data Number of cylinders............................................................6 Cylinder arrangement....................................................
More information@Perkins. Technical Data. 192, rev/min. ElectropaK
Technical Data 1100D Series ElectropaK @Perkins 1106D-E66TAG4 192,3 kwm @ 1800 rev/min Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement............................................
More informationRatings TAG2A (1500 rpm)...1: TAG2A (1800 rpm)...1: TAG3A (1500 rpm)...1: TAG3A (1800 rpm)...
527-746 kwm (Gross) @ 1500/1800 rpm 566-839 kwm (Gross) @ 1500/1800 rpm ElectropaK Basic technical data Number of cylinders............................................................6 Cylinder arrangement.......................................
More informationCurve Number: FR Engine Critical Parts List: CPL 2893 Date: 19Jun00. Aspiration : Turbocharged and Aftercooled
Curve Number: FR-90766 Engine Critical Parts List: CPL 2893 Date: 19Jun00 Displacement : 5.88 litre (359.0 in 3 ) Bore : 102 mm (4.02 in.) Stroke : 120 mm (4.72 in.) No. of Cylinders : 6 Aspiration : Turbocharged
More information3516B Offshore Generator Set
3516B Offshore Generator Set 1285 ekw (1836 kva) 60 Hz (1200 rpm) Actual configuration may vary from displayed image CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... IMO Tier I Bore...
More information3508 Industrial Engine
FEATURES Image shown may not reflect actual engine CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged
More information3406 C Industrial Engine Non-Certified 362 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...15.9:1
More information2500 Prime 2200 Continuous
Generator set data sheet Model: Frequency: Fuel type: kw rating: DQLD 60 Hz Diesel 2750 Standby 2500 Prime 2200 Continuous Exhaust emission data sheet: Sound performance data sheet: Cooling performance
More informationGenerator set data sheet Prime. Fuel consumption. Engine Standby rating Prime rating Continuous rating. Fuel flow
Generator set data sheet Model: Frequency: Fuel type: kw rating: Emissions level: DQLC 60 Hz Diesel 500 Standby 335 Prime 950 Continuous Exhaust emission data sheet: Sound performance data sheet: Cooling
More informationUltra-low sulphur diesel (15 ppm sulphur)
Generator set data sheet Model: Frequency: Fuel type: kw rating: DQLH 60 Hz Ultra-low sulphur diesel (15 ppm sulphur) 2750 Standby 2500 Prime 2100 Continuous Emissions level: EPA Stationary non-emergency
More informationSECTION D Engine 6.0L Diesel
303-01D-i Engine 6.0L Diesel 303-01D-i SECTION 303-01D Engine 6.0L Diesel CONTENTS PAGE DESCRIPTION AND OPERATION Engine... 303-01D-2 303-01D-2 Engine 6.0L Diesel 303-01D-2 DESCRIPTION AND OPERATION Engine
More informationEngine Construction and Materials DFP 2011 Series
DEUTZ Fire Protection Engine Construction and Materials DFP 2011 Series General Basic Configuration Mounting Inline 4 cylinder, direct injection Pedestal feet with rubber isolators Cooling and Lubrication
More information2500 Prime 2100 Continuous Emissions level: EPA NSPS Stationary Emergency Tier 2
Generator set data sheet Model: DQLF Frequency: 60 Hz Fuel type: Diesel kw rating: 2750 Standby 2500 Prime 2100 Continuous Emissions level: EPA NSPS Stationary Emergency Tier 2 Exhaust emission data sheet:
More informationDongfeng Cummins Techical Operations
Dongfeng Cummins Techical Operations : Curve and Datasheet:FR20322 Rev01 Date of Issue: 2010/03 450 Dongfeng Cummins Co.,Ltd Generator Performance Data FR20322 @ 1500RPM & 1800RPM : CPL: 3690 Compression
More informationTAG2A TAG3A. Series kwm 1500/1800 rpm kwm 1500/1800 rpm ElectropaK. Ratings. Basic technical data
4006-23TAG2A 527-746 kwm (Gross) @ 1500/10 rpm 4006-23TAG3A 566-839 kwm (Gross) @ 1500/10 rpm ElectropaK 4000 Series Basic technical data Number of cylinders....................................................6
More informationIndustrial CATERPILLAR ENGINE SPECIFICATIONS FEATURES. 612 bkw / 820 bhp rpm
3508 612 bkw / 820 bhp Industrial 1300 rpm CATERPILLAR ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore... 170.0 mm (6.69 in) Stroke... 190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 )
More information3512 Industrial Engine
CAT ENGINE SPECIFICATIONS V-12, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 51.8 L (3,161.03 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More information@Perkins. Technical Data Series TAG1A TAG2A TAG3A. Diesel Engine - Electropak. Basic technical data
Technical Data Basic technical data Number of cylinders.................................................... 6 Cylinder arrangement................................... Vertical, In line Cycle....................................4
More informationPage 1 of 9 303-01C Engine 6.0L Diesel 2004 F-Super Duty 250-550/Excursion DESCRIPTION AND OPERATION Procedure revision date: 08/06/2003 Engine Printable View Engine Description The 6.0L diesel engine
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression
More informationQT025A 2.4L 25 kw INDUSTRIAL SPARK-IGNITED GENERATOR SET EPA Certified Stationary Emergency
STANDBY POWER RATING 25 kw, 31 kva, 60 z Image used for illustration purposes only Features Generator Set Benefits PROTOTYPE & TORSIONALLY TESTED PROVIDES A PROVEN UNIT UL2200 TESTED ENSURES A QUALITY
More information1100 Series 4.4TW2GM Marine Auxiliary Engine kw (143.2 hp) gross prime 1800 rpm
Building upon Perkins proven reputation within the marine power generation industry. The 4.4 Series range of Marine Auxiliary engines now fit even closer to the needs of their customers. In the world of
More information3056 MARINE PROPULSION
056 MARINE PROPULSION 9 bkw (125 bhp) Image may not reflect actual engine SPECIFICATIONS I-6, -Stroke-Cycle-Diesel Bore... 100 mm (.9 in.) Stroke... 127 mm (5.0 in.) Displacement.................. 6 L
More information3406 C Industrial Engine Non-Certified 298 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...15.9:1
More information3406 C Industrial Engine Non-Certified 328 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...14.6:1
More informationTECHNICAL SPECIFICATIONS FOR 380/410 KVA, 6 CYLINDER DIESEL GENERATOR SET PACKAGED BY SCOPE OF SUPPLY FOR DIESEL GENERATING SET PACKAGE
MAHINDRA TECHNICAL SPECIFICATIONS FOR 380/410 KVA, 6 CYLINDER DIESEL GENERATOR SET PACKAGED BY ENGINE: Mahindra Scania Internal Combustion (IC) Diesel Engine conforming to BS5514 Standards CPCB Emission
More information1135 Prime 1000 Continuous Emissions level: EPA NSPS Stationary Emergency Tier 2
Generator set data sheet Model: Frequency: Fuel type: kw : DQGAE 60 Hz Diesel 1250 1135 1000 Emissions level: EPA NSPS Stationary Emergency Tier 2 Exhaust emission data sheet: Exhaust emission compliance
More informationMARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 320 mhp (315 bhp) 235 bkw
320 mhp (315 bhp) 235 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 7.2 L (442 cu in) Rated Speed...2400 Bore... 110 mm (4.33 in) Stroke...
More information4016TAG1A 4016TAG2A. Series kwm 1500 rpm kwm 1500 rpm ElectropaK. Ratings. Basic technical data
4016TAG1A 1270-1741 kwm (Gross) @ 1500 rpm 1413-1937 kwm (Gross) @ 1500 rpm ElectropaK Basic technical data Number of cylinders...................................................16 Cylinder arrangement..........................................
More information4000 Series TRS1 Spark Ignited Gas Engine rpm
Designed to meet the future demands of the market for clean, efficient gas fuelled engines for the power generation industry, the Perkins 4016-61TRS 16-cylinder spark ignition gas engine offers high performance,
More informationC280-8 MARINE PROPULSION
C280-8 MARINE PROPULSION 3084 bhp (2300 bkw) 900 rpm SPECIFICATIONS Shown with Accessory Equipment In-Line 8, 4-Stroke-Cycle-Diesel Emissions.................. IMO/EPA Tier 2 Compliant Bore mm (in)...
More informationC18 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1
More informationC32 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More informationC18 ACERT Industrial Power Unit Tier bkw/ rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More informationC32 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More information3516B SPECIFICATIONS. Lube System. gear type oil pump, gear type scavenge oil pump Dual Caterpillar A-III electronic engine control, Mounting System
2840 mhp (2800 bhp) 2088 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 69.0 L (4,210.64 in 3 ) Rated Speed...1880 Bore... 170.0
More informationVOLVO PENTA GENSET ENGINE TAD531GE
VOLVO PENTA GENSET ENGINE TAD531GE 1500 rpm, 102 kw (139 hp) 1800 rpm 111 kw (151 hp) The TAD531GE is a powerful, reliable and economical Generating Set Diesel Engine. Durability & low noise Designed for
More informationGRUPO ELECTROGENO 150 KVA
GRUPO ELECTROGENO 150 KVA 1.- Características Técnicas del Motor. Modelo Sistema de refrigeración Sistema de Admisión Cilindros Sistema Eléctrico Combustible Gobernador CUMMINS Radiador incorporado Filtro
More informationMARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 375 mhp (370 bhp)
375 mhp (370 bhp) 276 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 7.2 L (442 cu in) Rated Speed...2600 Bore... 110 mm (4.33 in) Stroke...
More informationC32 ACERT Industrial Engine Tier bkw/ rpm
CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression
More information3508 B Industrial Engine
CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged / SCAC Compression Ratio...14.0:1
More informationC18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1
More informationC12 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 715 mhp (705 bhp) 526 bkw
715 mhp (705 bhp) 526 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 11.95 L (729.23 in 3 ) Rated Speed... 2300 Bore... 130.0 mm (5.12
More information3512B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1360 bhp)
1379 mhp (1360 bhp) 1014 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 51.8 L (3,160.84 cu. in) Rated Speed...1600 Bore... 170.0 mm (6.69
More information@Perkins. Technical Data Series 2806A-E18TAG1A. Basic technical data. Cyclic irregularity for engine/flywheel maximum: Ratings.
Technical Data @Perkins 2800 Series 2806A-E18TAG1A Diesel Engine - ElectropaK 2806A-E18TAG2 Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement...................................
More informationC15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...18.0:1
More informationC18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1
More informationTechnical Data TWG2A TWG3A Series. Diesel Engine - ElectropaK rev/min. Basic technical data
Technical Data 4000 Series Diesel Engine - ElectropaK Basic technical data Number of cylinders...................................................12 Cylinder arrangement..........................................
More information@Perkins. Technical Data Series 2806C-E18TAG1A. Diesel Engine - ElectropaK. Basic technical data. Cyclic irregularity. Ratings.
Technical Data @Perkins 2800 Series 2806C-E18TAG1A Diesel Engine - ElectropaK Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement...................................
More informationC11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...140.0 mm (5.51 in) Displacement... 11.1 L (677.36 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.2:1
More informationDIESEL GENERATOR SET MTU 12V1600 DS660
DIESEL GENERATOR SET MTU 12V1600 DS660 400 230 V/659 kva/50 Hz/Standby Power Series 1600 MTU 12V1600 Optional equipment and finishing shown. Standard may vary. Product Highlights // Benefits - Industry-leading
More informationC7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation
More informationC13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...157.0 mm (6.18 in) Displacement... 12.5 L (762.8 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.3:1
More informationTechnical Data TRG TRG TRG Series
Technical Data 4000 Series Diesel Engine Basic technical data Number of cylinders................................................... 16 Cylinder arrangement.......................................... 60
More informationC9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.1:1
More informationMARINE C18 SPECIFICATIONS. Lube System. service, oil level gauge - RH or LH service, oil filler, Cooling System
486 mhp (479 bhp) 357 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Displacement... 18.1 L (1106 cu in) Rated Speed...1800 Bore... 145.0 mm (5.7 in) Stroke... 183.0 mm
More informationC7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation
More information1106A-70TAG4. Series kwm 1500rpm ElectropaK. Basic technical data
1106A-70TAG4 196.3 kwm (Gross) @ 1500rpm ElectropaK Basic technical data Number of cylinders....................................................................6 Cylinder arrangement...........................................................in-line
More information