Joey Coulter Florida Pro-Truck Series Rules. Series Rules

Size: px
Start display at page:

Download "Joey Coulter Florida Pro-Truck Series Rules. Series Rules"

Transcription

1 Joey Coulter Florida Pro-Truck Series 2015 Rules Series Rules Series Registration for 2015 will be $200, this makes you eligible for series points,any bonuses, any awards and points fund money. The registration fee will go toward having same officials for the season. You will pay $50 race entry fee and your number is locked in order of registrations received. Non-series members are not eligible for award, point and bonus money and will pay a $75 race entry fee. This must be paid in full by the first race. General Rules Competitors are responsible for the actions of themselves, crew members, family and friends. Anyone who is deemed to have crossed the line in conduct, abuse toward a series official, other driver, owner or crew can be fined, disqualified or suspended. Series director will make the ruling on this and it will be communicated to the person deemed to have violated. You may not consume any alcoholic beverages during the racing event. You may not go to stands and drink and return to the pits. No drinking is allowed until after all racing is completed at a track. No drinking in the tech area, if you act unprofessional your truck can be disqualified for your action of drinking and becoming un controllable. Fines and suspensions can be given as well. If you are caught at one of the tracks drinking when it is not allowed, you will be suspended from racing there the rest of the season. Please keep control of and speed down on any vehicles in the pits including truck, 4 wheeler etc. Point System will be as follows: Points, dropping 1 point per position through 24th which will receive 1. If more than 24 starters, each starting truck receives 1 point. 2. Qualifying points 1.) 3 pts. 2.) 2 pts. 3.) 1 pt. 3. Bonus Points Win 2 pts. Lead a lap 1 pt. Lead most laps 1 pt. ½ way leader 1 pt. *****Winner and second from previous event will start behind the invert, and are pulled out of the invert #. So if the invert was 5 and they were in the top 5 they are pulled out so that moves 6&7 into invert and they would start 6th & 7th. Invert is 5,7 or 9 no more than half the field.

2 Points go to the driver, each Driver will have 3 drops of the first 17 events- 1 Dirt race, 2 Asphalt races. You drop all finish and bonus points for that event. The drops must be announced following the next to last race before finale. If a driver is DQ d that race can not be one of your drops you then must have a zero for one of your best 15 finishes. All drops are 0 for all, so basically you will be taking your best 15 finishes based on the 18 race schedule. If we lose a race due to weather and can not reschedule it, we may adjust drops at that time TBA. You can not drop the finale race. Protests a. You must be in top 10 and on lead lap to protest. b. Protests must be made in writing specifying the rule(s) considered to have been violated. c. All protests must be filed within 10 minutes, after race ends. d. Protest must be specific, not bumper to bumper. e. If the truck is found to conform to the rules and the protest is disallowed, the protest fee will go to the protested truck. If the truck is found to be in violation of the rules and the protest is allowed, the protest fee will be returned to the protestor. f. All protest fees must be paid in cash. P&G $150 - $50 to series, Carburetor inspection $50, Whistler check $200 series retains $75, Top end tear down $500 - series retains $75. Scope check of the crank area $150 series retains $50. Cam Doctor check $200 - Series retains $100. Complete Motor Tear down $1,000, series retains $200. g. Only the protested truck s owner or driver, two crew, the protesting driver or owner who competed in the race, 1 crew member and series officials in the tech area for the protest tech. h. More than one driver may protest any one truck if they meet the protest time and fee procedure, and the specific rule they are protesting. i. Visual protests are to be honored any time before the race and does not have to be in written form, but need to be brought to tech or series official. The infraction must be either corrected or tech may use a weight penalty for that race if not able to fixed that day. Amount of weight is at the tech official s discretion. j. Excessive protesting will not be tolerated and can result in disqualification, loss of points and possible fine. Series officials will determine this. No protests allowed at final event, officials will handle. k. DO NOT REMOVE OR ALTER ANY CASTING OR PART NUMBERS. l. Confiscation Official s reserve the right to retain or confiscate any illegal part or parts and engine on any racing vehicle at any time it is deemed in violation or question. m. Tech reserves the right to check any truck in the field at any time, in any finishing order if he chooses to. They must conform to rules, or face disqualification.

3 Protest or tech tear down refusal: (includes engine, drive train etc.) 1. Any truck owner/driver refusing any protest or tear down for any reason will lose all money, points, awards, trophies earned for that race date. 2. The next race that truck will be inspected after race regardless of where it finishes, and they must start at rear of field if they qualify in at the next event they run and pay a $100 fine. 3. If the owner/driver refuses a second time they lose all for the night and the season, and are through for the remainder of the season. 4. The owner/driver will have to have truck inspected and approved and pay a $500 fine to begin the new season with the series. Qualifying Procedures: 1. The driver that qualifies the truck, must start the race in the truck. If a driver change is made the truck must start at tail of the field. 2. Tires you qualify must be the tires you race on. Only tire changes allowed is due to a flat with a series official s approval. 3. Tech will decide how many to tech after qualifying. This does not have to be announced prior to qualifying. 4. A driver late for qualifying will receive only 1 lap of time. Normal Qualifying will be two laps of time. 5. Fast qualifier will draw a pill for inversion 5, 7, 9 no more than half the field. 6. In the event of a tie in qualifying the driver going first will get the time. 7. You may tape up for qualifying. In the event that rain cancels qualifying the lineup will be according to points, and those with out points by a draw. There will only be an invert of 5 or no more than 1/2 the field if less than 10 trucks. Race Procedures 1. Starts will be side by side at a designated spot given at driver meeting at each track, the flagman starts the race. No passing until you have crossed the start finish line. 2. If a driver causes a false start, the second time the driver will be sent to the rear. 3. When a caution is displayed lineup is determined by the last lap completed scoring. 4. Restarts will be double file, leader will fire at designated spot given in drivers meeting at that track. No passing to inside until you have passed the restart line. 5. If you go to outside before green is displayed you are jumping, you will be penalized spots per truck jumped at next caution or at end of the race. If you realize it and give the spot back you will not be penalized.

4 6. Races will be 50 green flag laps unless otherwise announced at an event We must complete 25 laps for race to be official, in case of weather issues. 7. When caution is displayed remain in single file order. If unsure of spot pull to outside of questioned spot officials will check and place you where you go. 8. Truck or Trucks that cause the caution will go to the rear. If the race director feels it is intentional he can give the other driver their spot back. If it is your fault, and you want to let other driver have the spot back you can tap your roof. If you stop on the track to bring out the caution and we feel it was intentional, you will be penalized 1 lap. 9. Series or track official can only pull a fender or remove flapping parts or help with a safety issue ( example fuel cap, oil on windshield etc.). You must go to the pits for any other work. 10. If you have a flat we will give you 2 laps from the time you get in the designated tire changing area or your pit. The following is the procedure in regards to accidents or trucks coming to a stop on the race track. 1. A driver is to remain in his or her truck until a safety or track official arrives on scene. 2. Drivers are to lower their window net if they are fine. 3. You may exit the truck if there is fire or smoke but go the the closest safe spot. 4. If in the truck keep your belts fastened until the safety or track official arrives. 5. You are to not leave your race vehicle on track unless the safety people are treating you. 6. Under no circumstances is a driver to walk on to the racing surface toward on coming trucks. Throwing of helmets etc in anger. is not permitted. 7. Follow the instructions of the track safety and/or track officials. If you do not follow these procedures, you can be DQ d, fined $500 and / or suspended for 1 race depending on the severity. This is at the determination of the series director.

5 Driver Safety Rules 1. You must have proper rated 2010 or newer snell approved helmet. 2. A type of head and neck restraint is mandatory! 3. Complete firesuits, gloves and shoes are mandatory. Must be in good shape no holes etc. 4. Driver s window net must have quick release, with latch at top left. Cannot be a string type window net and must be 22 wide and 16 high. When latched must fit tight. 5. Commercially made aluminum racing seats with rubber pads mandatory. Dual right and left side head rests are highly recommended. 6. Safety Harness 5 point minimum must be no older than 3 years old and be in good shape 7. Proper resilient padding for roll bar use must be installed on roll cage around driver. 8. Steering Wheel must be padded. 9. Fully Charged fire extinguisher mandatory. On Board fire system is highly recommended. 10. A battery disconnect switch is mandatory and must be easily accessible to the safety crew and driver, must be clearly marked with on and off and be readable by safety crew outside the truck. 11. Spotters are mandatory for each truck, need to have a raceiver for race control (track frequency) get that from the tracks. No truck to truck radios. Truck Safety Rules 1. Drive shaft loops are mandatory within 12 of the ends. 2. Exhaust exiting door must be flush, not extending past the body. 3. Must have fluid catch can for radiator over-flow, no antifreeze allowed to be run. 4. Battery and connection must be minimum 18 away from fuel cell. 5. Roll cages must be built of 1 ¾.095 thickness tubing minimum. 6. Cages must be attached properly in at least 8 spots on the chassis. 7. Minimum of 4 door bars on the left side, plated with 1/8 inch steel. 8. All roll bars around driver must be padded. 9. All joints must be welded properly, no cracks or gaps. 10. Fuel cell must be between frame rails. Maximum 22 gal. 11. Must have a check valve. 12. Fuel cell minimum ground clearance Fuel cell protection bar mandatory, minimum of thickness tubing. 14. Fuel cell must have minimum of 2 straps, 1 wide surrounding entire fuel cell. 15. No fuel cooling / altering devices allowed, Fuel must go straight from cell to carb. 16. No electric fuel pumps. 17. No fuel additives, Fuel can be tested at anytime. 18. All weight added on truck must be bolted in with minimum ½ bolts, with locking nuts. Minimum of two bolts per 50 lb. weight. Minimum 5 Lb blocks. 19. All weights must be painted white, and have truck number on them. 20. No weights allowed inside the driver compartment.

6 Pro-Truck Rules Please be sure you have read and understand all these rules, if you do not please be sure to ask a series official for clarification. Not understanding the rules is not an excuse to break them. The word stock, used within the rules, means as originally produced by the manufacturer for that make / model / year of the truck. It is stock with no altering or modifications. Aftermarket parts must be same dimensions, weight, and / or volume as the OEM part. Determination of whether anything is legal will be the tech and series directors decision. NO Carbon Fiber or titanium permitted anywhere in the truck. ***NO Bump stops. No Traction control devices of any kind allowed. If it does not say it, you probably can t do it, talk to tech and series director, do not assume it is ok. Truck: a. Only GM Metric frame may be used. b. Must be original 108 wheelbase and be the same measurement on both sides, ½ tolerance. c. Tread Width 64 front and rear. Spacers permitted, no more than 64 inches. d. Chassis must remain stock unless otherwise specifically noted in rules. e. Frame may be fabricated from 6 forward of the centerline of the rear axle and from front sway bar forward. f. Frame can be X d g. 6 minimum ride height on chassis. h. Cross member must remain stock and in stock location, it may be notched for oil pan and fuel pump clearance only. Must be boxed with 1/8 inch steel. If yours had been cut you must add square tube metal to make it same height, width and depth as a stock one. i. All pick up points must remain stock in stock locations. Front Lower arms and rear trailing arms. No modifications to arms, holes, no drilling and lightening allowed. Suspension: a. Front suspension components must remain stock, unless otherwise noted in another rule. b. Heavy-duty steel aftermarket hubs & rotors are required on the right front wheel. c. Springs must mount in stock location. Top of frame may be changed to add wedge bolts or to allow for spring removal. d. Shocks must be mounted directly to the lower A arm. e. Pitman arm and steering arm may be changed, aftermarket center link is permitted. f. Stock inner tie rod, Outer tie rod may be a heim joint.

7 g. Aftermarket tubular upper A arms ok. Lower control arms must be stock. Both must be in stock location. h. No adjustable stock bolt on or screw in type ball joints. Lower ball joints must be stock. Dodge ball joints may be used only on top only. i. Coil spring rubber inserts are permitted, no leaf springs or torsion bars permitted. j. Steel, poly or monoball bushings ok, no offset or eccentric bushings. k. Sway bar must be 1 piece stock 1 3/8 maximum diameter. l. ****No rear panard or sway bars m. Steering: Stock OEM steering box in stock location. Universal joints, up to three, can be put on steering shaft as well as heim joints. Aftermarket power steering kits or steering quickener kits ok. Must be driven off the crankshaft. n. Spindles, bearings and hubs, Stock HD steel aftermarket hubs and rotors ok. Spindle savers are recommended. Steering arms must be same length on right and left. o. Distance between the centers of the bolts on the upper arms should be no less than 10 ¼. Must use stock OEM Factory control arms, bushings at both the front and rear of the trailing arms must be stock style rubber or polyurethane. n. rear lower trailing arms must be factory OEM and remain stock, no modifications, extra wholes etc. Bushings at both the front and rear of the trailing arms must be stock style rubber or polyurethane. May strap every 1 for added strength, but can not be made solid o. no coil over springs can be used on truck. rear springs must mount on top of axle tube, Must be standard diameter rear springs. Shocks mount in stock location. Shocks l. Only 1 shock per wheel permitted. All shocks must be steel, can be single shrader valve rebuildable shocks with a maximum of $ retail value per shock. Internal rebuild parts must remain as purchased in that shock not to exceed the retail value. May not use base valves in shocks. Adjustable shafts and canisters are not permitted, no external adjusters. Shocks can be claimed for $225 each. Refusal to sell is a DQ, loss of money and points and a $200 fine. Series tech can DQ truck for shocks if they exceed the $ value and can be confiscated. Rear mount location optional on the rear axle.

8 Body : a. SEE BODY TEMPLATE ATTACHED b. Approved Series Truck body manufacturers are : ARP, Speedway Racing Bodies, Lightning Lite, Five Star. May make own aluminum body pieces, but must be approved by series, and fit templates. c. Series approved bodies are : Chevy C-10/C1500 Silverado, Ford F150, Dodge Ram, Toyota. No Carbon Fiber d. Body must be entered in the center of the frame with wheels in center of wheel wells with 2 tolerance. All body parts must be attached firmly to cage or frame and is subject to approval. e. Body ground clearance is a minimum of 4 inches measured anywhere. f. All body support brackets must be solid and located inside the body structure. g. Nose Width is 81 max. h. Front air dams must maintain their original configuration. i. Maximum rake for roof is 1. j. Minimum side window opening must be at least 16. k. Front and Rear windows must be full six 1/8 lexan. l. Front windshield brace is mandatory, 35 degree angle on windshield 1 degree tolerance. m. Both side windows may have 1/8 lexan vents only, 9 high, 12 length max. n. Hoods to remain stock with the following changes allowed: An opening of 2.5 x 20 may be cut in the rear of the hood, centered behind air filter which will allow air intake. A 1.5 x 1.5 X 20 heat deflector may be installed on the fire wall at this opening. o. Rear Deck lids are mandatory, must be able to open for technical inspections. p. Rear deck lids can be fiberglass, sheet metal or aluminum. Must be flush with quarter panels. q. 6 x 60 solid rear spoiler is mandatory. May have approved braces front side or back side, not on both sides. 55 Degree Minimum angle r. Stock rear bumper cover is mandatory. Must be complete and unmodified. Must have full 90 degree flap on the bottom edge, no cutting. s. 1 inch square tubing may be used for rub rails, bolts cannot protrude outward. t. Rear deck height minimum 36, max 40. ***different from body template sheet. Interior: a. Vehicle interior must be complete and shield driver from the ground, engine compartment and fuel cell area. b. Floors must be steel and the rest of the compartment can be from steel or aluminum, but must be fully enclosed and extend from left to right side of truck. c. Truck must have a rear firewall of steel to separate driver from fuel tank. Firewall may be welded, riveted or bolted. d. May have installed dash panels, no digital gauges.

9 Rearends: a. Rear differential housing must be stock steel bolt GM or 9 Ford housing. b. Brackets for mounting trailing arms must be in stock location with stock mounts. c. Rear spring perch must remain on the top of the axle tube. d. Ring gear and pinion must be stock and mount directly in housing. e. Only stock ring and pinion, off the shelf available gears allowed. No custom ground or lightened gears allowed. GM gears, Ford gears. f. C Clip eliminators are optional. g. Welded spider gears and steel mini-spools ok. h. Any stock fitting differential cover ok. i. Moser 26 spline axle mandatory on the right side. j. No posi- traction units or locker type rear spider. k. Only stock steel/cast carrier allowed. l. Solid steel axles only. m. All rearend parts must be magnetic / steel / No aluminum. Must make a place in the covers to insert a magnet or a scope Tires and Wheels: a. 8 steel racing wheels with any offset, no wheel weights. b. Hubs must have 5/8 wheel studs. c. Tires must be official series approved tires only. d. No bleeders. e. Must punch minimum left side 46, rights 48. f. 4 new tires allowed at announced events, 2 tire limit for all other races. Must run tire that have been logged on your sheets. Can use any from any race. g. Serial # s will be recorded, tracked. We ask you to please buy your tires from the track the day of the race. Thanks *** Series Tires Only TBA - NO SOAKING TIRES! *** Dirt Tire TBA - We plan to have 1 set of tires for all 4 races. Brakes: a. You must use GM stock single piston calipers, single piston Howe is allowed, must be steel. b. All four brakes must be in full working condition. c. Rear disc brakes are mandatory. d. Rotors must be steel or cast iron and brake hats may be steel or aluminum.

10 Transmission: a. Only GM Turbo 350, Ford C4 or C6, and Chrysler 904 or 727 automatic transmissions allowed with following exceptions. No drilling or lightening on the transmission or interior parts except the following items for oiling purposes. Front Planetary Reaction Gear per spec see tech for spec sheet. Sun shell cover (must be a solid stock type) may be drilled at back per spec see tech for spec sheet. ( No big hole sun shells allowed). b. Must have all forward and reverse gears working. No modifications. c. GM Turbo 350 may use 2.75 low gear second gear option. No turbo 200/250 parts may be used in 350 transmission. d. Replacing thrust washers with bearings ok. e. No aluminum or billet parts allowed in transmission. f. Removal of Governor ok. g. Manual shift valve body permitted. h. Reverse shift pattern ok. i. Torque convertor must be minimum diameter of 10 and working. j. Transmission coolers with fans ok. All cooling lines must be steel braided with screw on fittings. k. Safety Bell Housing and/or flexplate shield ok. l. Solid output shafts only, no drilled, hollowed shafts. Hollowed shafts are no longer allowed. m. JW Transmissions,TCI Transmissions or others allowed as long as they meet these rules. n. Drive shaft: Steel only, must be painted white with truck number on it. Standard (add 50 lb) 1. Standard steel or aluminum 3-speed or 4-speed OEM or OEM style synchronized manual transmissions with non-splined clusters allowed. No magnesium permitted. 2. No 2-speed transmission will be permitted. 3. No gun-drilled main shafts. 4. No internal clutch-type transmissions allowed. Must have external clutch, pressure plate, and flywheel assembly. 5. Transmission must have at minimum two (2) forward and one (1) working reverse gear. 6. Two lever shifter or H-pattern shifter only.

11 7. No overdrive or under driven transmissions permitted. High gear must be 1 to 1 and no other gear may have a ratio higher than 1.20 to No Rankin-type or cluster-disconnect transmissions allowed. 9. All manual transmissions must have helical gears only. No straight-cut gears allowed. 10. No quick change type transmissions allowed. Clutch & Flywheel: 1. Standard OEM or OEM-type and size clutch, pressure plate, steel flywheel, and throw-out bearing permitted. 2. Stock Clutch minimum 10 Solid hub clutch ok. Must have pad or full circle. 3. May use heavy-duty replacement pressure plate and disk. No aluminum allowed. 4. No Light Weight Parts: 10,000 RPM etc All flywheels will be weighed on Track scales. Fly wheel weigh minimum of 14 pounds. 6. Standard transmission must use shatter proof bell housing. 8. After market shifters permitted hole in bell housing for inspection drive-shaft safety loops mandatory. Within 15 of front U Joint. 11. Drive shaft must be painted white, add car number. No Aluminum Drive Shafts Allowed. No carbon fiber. 12. May use hydraulic release bearing and push pull slave cylinder.

12 Engines : Vacuum Rules Each truck must have a vacuum port and fitting to check ZZ4 Crate rpm 602 Crate rpm 347Jr Ford rpm 351 Ford rpm 360 Dodge rpm 318 Dodge rpm 305 Chevy - Check Cam Lift Anything below these vacuums is wrong. We will check with cam doctor.

13 Engines Built type: 1. Stock cast iron production blocks only. Gm 305, Ford 302,Dodge Any questions/concerns regarding the legality of internal parts should be directed to the series tech director, prior to racing. 3. Series reserves the right to use weight to penalize violations, equal competition and will do so at their discretion with fairness in mind. 4. Blocks 5. May be studded in mains only, no aftermarket caps, may be four bolt if that was available. 6. Maximum of wear, no sleeve down blocks 7. All factory casting numbers must remain, may add oil screens and paint block. 8. Minimum deck height on all are.000. That means no part of the piston may come past deck surface. 9. No altering of lifter bore. 10. Blocks must maintain OEM type bearings in the main and cam journals. Heads: For all brands NON-CRATE 1. Only factory production, cast iron heads that are OEM for the engine type being used and that produce the factory specified volumes, are permitted. 1. Minimum combustion chamber volumes: Chevy 52cc, Ford 52cc, and Dodge 56cc. 2. No porting, port matching, excessive decking beyond the chamber minimum volume, angle milling, chamber polishing, or grinding allowed. 3. Stainless steel valves are legal. 4. Three angle valve jobs allowed. 5. Any type guide material may be used. The valve guides must be in the stock factory location, angle, and spacing. 6. Valve springs must be of the stock type. No triple, conical, beehives, or progressive springs allowed. 7. Valve stems must be stock height only. 8. Retainers must be steel or chrome-molly steel only. Valve spring retainers must be stock type only. Plus or minus height retainers are allowed. 9. Valve spring keepers must be stock type only. Seven or ten degree locks may be used. No spring cups. 10. All heads must have visible and unaltered casting numbers.

14 Chevrolet 1. Any stock 305 head # ,# also allowed. Part number head not permitted. Engine quest CH305b allowed cc minimum 3. Stock valve 1.84 intake/1.50 exhaust. Stainless steel replacement valves permitted. 4. No interior deburring, polishing or hand blending permitted. 5. Studs may be pinned or screw in studs and guide plates ok. 6. Stud girdles ok roller rockers ok. Dodge 1. Dodge Magnum heads up to 97 are ok. 2. Stock 318 heads ok cc minimum intake,1.54 exhaust valve size on 318 heads w/ 1.5 roller rockers intake,1.54 exhaust valve size on magnum heads w/1.6 roller rockers 6. No interior deburring, polishing or hand blending permitted. 7. Studs may be pinned or screw in studs and guide plates ok. 8. Stud girdles ok Ford 1. The Ford GT-40, GTP 40 heads or 302 heads ok cc minimum 3. Stock valve 1.84 intake/1.50 exhaust. Stainless steel replacement valves permitted. 4. No interior deburring, polishing or hand blending permitted. 5. Studs may be pinned or screw in studs and guide plates ok. 6. Stud girdles ok roller rockers ok.

15 Intake 1. Chevy # 7101,7116,2116 / Ford # 7121 / Dodge # No porting, polishing or coatings in runners. 3. No milling. 4. Dodge # 7176 may be modified to fit magnum heads. 5. No laser treating or micro holes allowed in intake. 6. Must have vacuum port to hook up vacuum gauge for testing. Rods 1. Rod length Chevrolet 5.700, Ford 5.090, Chrysler No lightening, beam polishing, or exterior machine work allowed on rods, except slight bob weight removal for balancing. 3. OEM or OEM appearing after-market rods permitted, may be floated or press fit pin s. 4. No aluminum or titanium rod s. 5. Fasteners engine builders option. Pistons 1. Flat top or dished top pistons. No reverse dome or D cup allowed. 2. Wrist pin must remain in OEM position. 3. Cast, forged or hypereutectic ok. 4. No lightweight pin s. Crankshafts 1. Only OEM or stock replacement Chevy, Dodge, and Ford cast iron or steel crankshafts are legal with OEM stroke. 2. No O.D. turning, lightening, knife edging, weight polishing, or cross-drilling for weight removal will be allowed, except for "Mallory Metal", or minimal metal removal for balancing. 3. Any type harmonic dampener or flywheel may be used, SFI approved units encouraged. 4. Minimum weights- Ford 32lbs, Chevy 48lbs, & Dodge 48lbs.

16 Camshaft 1. Flat tappet or hydraulic cam, maximum lift.474/.510 duration engine builders option. 2. Lifters stock size hydraulic, anti-pump up or solid 3. No lightweight push rods allowed. Push rods may be sized to length to fit geometry. No rev-kits, offset rocker arms, roller lifters, light weight lifters, coated lifters, mushroom lifters, or oversize lifters are permitted. 4. Stock or roller timing chains are allowed Torrington Thrust Bearings, to prevent block wear, are legal. No gear to gear or belt drives allowed. Cam thrust-buttons are allowed. Camshaft Degree optional. CRATE ENGINES 602 with Holley 650 HP allowed (add 50 lb.) ( Compression check max 160 on guage ) 603 (ZZ4) runs 500 cfm old style 4412 Carb only 602/603 Crate engine must follow the Gm Performance parts Technical Manual. If it is not listed don t do it unless you have spoken to tech and have your rule book signed and carry with you to tech. A tech bulletin will then follow for all racers to see the clarification or change. 1. Option valve springs stock diameter, no double springs max 130 lbs. Comp # 941 is a valid spring. 2. NO 1.6 ROCKERS, Self aligning Stamp Rollers only 3. 53CC MINIMUM ON CYLINDER HEAD ON CC MINIMUM ON CYLINDER HEAD ON Deck height.014 minimum 6. MUST MAINTAIN 10.3:1 COMPRESSION RATIO (Compression check max 180 on guage) 7. Must use factory intake gasket,other gaskets engine builders choice, but must maintain compression ratio. 8. May use Clevite bearings, cannot be coated bearings nor-use undersized bearings. Must be direct replacement bearings

17 9. All hard parts must be factory GM parts. 10. Fasteners rod,main bolts must be same crate motor type as shipped. Other fasteners option of engine builder except if they were a bolt must remain as a bolt. 11. MAX overbore for wear. No tolerance over those numbers. 12. When changing head gasket to other than factory gasket push rods may be changed to except hardened push rods. At that time guide plates may be added. No light weight push rods, cannot be adjustable style. 13. Again follow the Gm manual. 14. Camshaft must be a stock out of the box camshaft from Gm if you decide to regrind it is wrong. Cam doctor will be used at any time when the series feels it needs to. FORD 347JR 1. M6007S347JR MAY USE M6513-BH valve springs this is a beehive 130# or comp This engine must follow the Ford Racing Technical Manual. 3. Must maintain 10.7:1 compression ratio (according to new Manual) (Compression check max 160 on guage) 4. Mininum deck height.010 +/ Max overbore for wear 6. Fasteners rod,main bolts must be same crate motor type as shipped. Other fasteners option of engine builder except if they were a bolt must remain as a bolt. FORD 351W 1. May use m6513-bh bearings. 2. Intake to be used must be a Ford m or performer # 7181 only cc minimum on heads 4. Must maintain 9.3:1 compression ratio (Compression check max 150 on guage ) 5. Fasteners rod,main bolts must be same crate motor type as shipped. Other fasteners option of engine builder except if they were a bolt must remain as a bolt. 6. Due to several cam combo s these are the numbers that are legal. M6250-e303, m6250-x303 and m6250-z Minimum deck height Refer to Ford Performance Manual for any other details. 9. Max overbore for wear

18 Dodge 318 (Reverts to old FASTRUCK type motor rules) see Carl Green Dodge Refer to Mopar Performance for any other details. 2. Intake manifold p casting number p cc minimum on cylinder heads 4. Must maintain 9.3:1 compression ratio (Compression check max 150 on guage) 5. Minimum deck height / Max overbore wear 7. Magnum heads use 1.7 rocker ratio 360 heads use 1.6 rockers 8. Fasteners rod,main bolts must be same crate motor type as shipped. Other fasteners option of engine builder except if they were a bolt must remain as a bolt. Misc All engines: **** All engines, must have an inspection hole w/plug (minimum 1") for use of a scope to check crank area. Speak with tech man, for right location. Carburetor 1. Carburetor- Holley old style 4412, 500 cfm with a maximum spacer/ adapter between intake and carburetor. Changing of jets,power valve, drilling holes in butterflies permitted. 2. Choke horn may be removed. 3. Venturi area must not be altered or reshaped in any way. The casting ring may not be removed. Must remain as produced by the manufacturer. 4. Base plate must not be altered in any way. All openings must be permanently plugged. 5. No additional air to be picked up below the openings of the venturi such as altered gaskets, base plate, or holes drilled into the carburetor. 6. Carburetor Booster: Booster type may not be changed. Booster size and shape must not be altered. Height and location of the booster must remain as manufactured. 7. Throttle shaft must remain stock and may not be thinned or cut in any manner. Screws may be flush with shaft. No other work to screws.

19 Crate can run a Holley 650 HP guage legal four barrel. No alterations or modifications, with a maximum spacer/adapter between intake and carburetor. Air cleaner 1. Air box optional 2. A round un-altered air cleaner element with a maximum diameter of fourteen (14) inches with a maximum height of four (4) inches is required. All air must be filtered thru this filter. 3. No duct work added to air cleaner. Fuel system 1. Fuel pump-stock mounted mechanical pump only, brand optional. 2. The fuel cell must be completely enclosed in a magnetic steel container made from no less than 22-gauge magnetic steel. 3. The use of ice, wet or dry, for the purpose of cooling the engine, air cleaner, or fuel system is not allowed. 4. Maximum fuel cell capacity is 22 gallons. Fuel cell must be centered in chassis. Fuel cell frame must maintain a minimum ground clearance of 8-inches without the driver. 5. Replacement of steel fuel lines with steel braided fuel lines is highly recommended. 6. Track Officials reserves the right to test the fuel at any time. 7. No fuel additives. Cooling & Oiling system 1. Stock type replacement water pump, no electric. 2. Electric fan ok. 3. Radiator- aluminum ok, must have catch can mounted in front of firewall. Recommended to have a overflow hose mounted to rh corner of windshield. 4. Water wetter ok, no anti-freeze may be used. 5. Oiling system- must be wet sump system, remote filters permitted, racing pan ok.

20 6. No two-stage or belt driven oil pumps allowed. Exhaust 1. System may not exceed 3 od anywhere. 2. Headers optional,or "up and over" (crossover) headers with a maximum 3 collectors are legal. 3 exhaust pipes the rest of the way out degree headers ok. 4. Exhaust equalizer "H" and X pipes are permitted. 5. All exhaust system must exit past the driver's compartment. The minimum exhaust system ground clearance is 3 inches. 6. Stepped headers allowed. 7. Iron lung & tri Y headers ok. Engine location: 1. Must be centered between frame rails, 1 tolerance. 2. Crankshaft height is 12 from center of the crank to the ground. Engine placement is measured from the spark plug (closet to the radiator) centerline to an imaginary line projected between the left and right upper a arm ball joint as follows below: 1. All Chevrolets: 4 inches on the drivers side forward of the ball joint. 2. Fords 1.75 inches on passenger side forward of ball joint. 3. Dodge 1.75 inches on the drivers side forward of ball joint. Minimum 15 of vacuum at 950 RPM. Ignition : as of All wiring from the ignition box to the distributor, must be visible for inspection at all times. a. Battery Single Battery 12 volt system only. b. MSD box with chip capability mandatory. (Chips not scheduled to be used at this time, but you need to have the capability) No crank triggers, No magnitos

21 Weight: 602, 603 ZZ4 Crate & M6007S347JR Motors with Factory Seals 2800 lb with 57% left side. *** Add 50 lb. for Standard Transmissions *** 602 add 50 lb. for 4 bbl. All Other open and built motors lb. with 57% left side. *** Add 50 lb. for Standard Transmissions *** 602 add 50 lb. for 4 bbl. *** These weights, can be adjusted at the series discretion to equalize the competition, with verbal then written notice. Any engine builder, must seal your motor with his own seal. The motor is sealed by engine builder, the owner is stating the truck has had the motor built according to series rules. Engine Penalties - Engine internal - (Cam, Crank, Pistons, etc.) First Offense - If found illegal by cam doctor, or any other test or tear down,the owner will be given a $1,000 fine, loss of money, loss of points for that race, and a loss of 12 additional points. Parts will be confiscated. Engine must be resealed by the engine builder. Driver must start in the rear of the next 2 events the truck runs. Fine must be paid to race. 2nd Offense - $2,000 fine, loss of all points for the season. Engine can be confiscated, You are done for the season and must pay the fine and apply for reinstatement for the following season. Other infractions such as carb, ignition, trans etc. - loss of points for the event. Must start in the rear at the next event you run.

22

PLEASE BE SURE YOU HAVE READ AND UNDERSTAND THE GENERAL RULES, SAFETY RULES AND DRIVER SAFETY EQUIPMENT BEFORE CONTINUING.

PLEASE BE SURE YOU HAVE READ AND UNDERSTAND THE GENERAL RULES, SAFETY RULES AND DRIVER SAFETY EQUIPMENT BEFORE CONTINUING. 2017 SPORTSMAN RULES Any rule changes made in 2017 are highlighted in RED. *Speedway Officials shall be empowered to permit minor deviations from any of the specifications herein or impose any further

More information

2017 Pro Truck Driver Safety Rules: Truck Safety Rules: Truck: Suspension: Steering:

2017 Pro Truck Driver Safety Rules: Truck Safety Rules: Truck: Suspension: Steering: 2017 Pro Truck Driver Safety Rules: 1. You must have proper rated 2010 or newer Snell approved helmet. 2. A type of head and neck restraint is mandatory. 3. Complete firesuits, gloves, and shoes are mandatory.

More information

CHARGER 2017 RULES & REGULATIONS Revised 1/22/17

CHARGER 2017 RULES & REGULATIONS Revised 1/22/17 CHARGER 2017 RULES & REGULATIONS Revised 1/22/17 IMPORTANT NOTE: Applications for NASCAR License may be obtained from the Pit Steward at the sign -in-window or at the speedway office during regular business

More information

Thunder Bomber 2018 GENERAL

Thunder Bomber 2018 GENERAL Thunder Bomber 2018 GENERAL - Tech man has right to check this every week. 1. No nitrous or traction control. 2. After 3 times of refusing to tear down - you will be disqualified from competing in this

More information

Thunder Bomber 2019 GENERAL

Thunder Bomber 2019 GENERAL Thunder Bomber 2019 GENERAL - Tech man has right to check this every week. 1. No nitrous or traction control. 2. After 3 times of refusing to tear down - you will be disqualified from competing in this

More information

2018 Pure Stock Rules. The rules listed below are being enforced for all drivers of the Pure Stock class to abide

2018 Pure Stock Rules. The rules listed below are being enforced for all drivers of the Pure Stock class to abide 2018 Pure Stock Rules The rules listed below are being enforced for all drivers of the Pure Stock class to abide by. For questions contact the race track or technical director. Contact information is listed

More information

Econo-Mod Rules. *Transponders & Raceceivers mandatory*

Econo-Mod Rules. *Transponders & Raceceivers mandatory* Econo-Mod Rules Top 3 from each heat must scale. Top 5 from each feature must scale & go immediately to tech. Failure to do so will result in a disqualification. *Transponders & Raceceivers mandatory*

More information

Lavonia Speedway 2018 Racing Season

Lavonia Speedway 2018 Racing Season Lavonia Speedway 2018 Racing Season Stock 4 Cylinder- (Window Safety Net & Mufflers are Mandatory) (*note 2 engine combinations*) BODY - A. Stock auto only B. May have complete aluminum body C. Inner panel

More information

ELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150

ELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150 2018 SUPER TRUCKS RULES $1000 fine for tire soaking $100 fine for antifreeze ELIGIBLE MODELS Chevy C-10 GMC 1500 Dodge Ram Ford F-150 HMS Enforcer (Harrington Spec) 2850/1265 lbs with driver 1. Minimum

More information

SANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES

SANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES SANDIA SPEEDWAY 2018 STREET STOCK DIVISION RULES DRIVER: The minimum age for a driver is fourteen (14), unless approved by two of the following three: race director, tech inspector or promoter. All required

More information

CYLINDER TRUCK RULES

CYLINDER TRUCK RULES 2019 4 CYLINDER TRUCK RULES The rules herein shall refer to Adirondack International Speedway as AIS. These rules are intended to create affordable and fair competition. While they offer a good outline,

More information

THIS CLASS IS TO REMAIN STOCK APPEARRING WITH ALL COMPONENTS IN STOCK LOCATION

THIS CLASS IS TO REMAIN STOCK APPEARRING WITH ALL COMPONENTS IN STOCK LOCATION SOUTHERN OREGON SPEEDWAY Website: www.sospeedway.com 2013 STREET STOCK RULES THIS CLASS IS TO REMAIN STOCK APPEARRING WITH ALL COMPONENTS IN STOCK LOCATION 1. MODELS: A. American sedans and hardtops. Station

More information

LIMITED LATE MODEL. A. Standard Dirt Style body required. A stock appearing nose is required.

LIMITED LATE MODEL. A. Standard Dirt Style body required. A stock appearing nose is required. LIMITED LATE MODEL BODY: A. Standard Dirt Style body required. A stock appearing nose is required. B. Schaeffer Oil Southern nationals Body rules apply. C. See tech inspector if you have any questions.

More information

PLEASE BE SURE YOU HAVE READ AND UNDERSTAND THE GENERAL RULES,SAFETY RULES AND DRIVER SAFETY EQUIPMENT BEFORE CONTINUING.

PLEASE BE SURE YOU HAVE READ AND UNDERSTAND THE GENERAL RULES,SAFETY RULES AND DRIVER SAFETY EQUIPMENT BEFORE CONTINUING. 2017 MOD MINI RULES Changes for 2017 are highlighted in red *Speedway Officials shall be empowered to permit minor deviations from any of the specifications herein or impose any further restrictions that

More information

* 2019 (NEW DIVISION) PURE STOCK RULES *

* 2019 (NEW DIVISION) PURE STOCK RULES * * 2019 (NEW DIVISION) PURE STOCK RULES * SAFETY: RACECEIVERS ARE MANDATORY!!! Pure Stock cars must have sound roll bar overhead a 4 point cage. Roll bars and safety equipment will be checked by track.

More information

2013 Senoia Raceway Rulebook

2013 Senoia Raceway Rulebook 2013 Senoia Raceway Rulebook E-mail tech questions to: johnnywalls31@yahoo.com BOMBER RULES BODY 1. All bodies must be stock steel bodies. No fiberglass or aluminum body panels allowed. Fenders and quarter

More information

1- Any stock appearing metal bodied four cylinder car or truck through the current year.

1- Any stock appearing metal bodied four cylinder car or truck through the current year. Super Stock 4 2018 Rules 1- Any stock appearing metal bodied four cylinder car or truck --1965 through the current year. 2- You may run an aftermarket fabricated body. The body must be made from magnetic

More information

ARIZONA SUPER STOCK Super Stock Rules and Regulations

ARIZONA SUPER STOCK Super Stock Rules and Regulations ARIZONA SUPER STOCK 2014 Super Stock Rules and Regulations If the rules don t say you can, assume you cannot. The rules are written as a guideline. If you are unsure about something, ask an official. The

More information

2018 PURE STOCK RULES

2018 PURE STOCK RULES 2018 PURE STOCK RULES PROTEST: 1. Engine Top $300 bottom $300 2. 602 Crate Engine $350 Top $400 Bottom 3. $100 per shock Claim Rule top three only 4. Tire Protest $100 (one tire) top three only 5. CRATE

More information

2015 Super Stock verses Street Stock. Rules UPATES 2/12/2015

2015 Super Stock verses Street Stock. Rules UPATES 2/12/2015 2015 Super Stock verses Street Stock Rules UPATES 2/12/2015 1. All racecars must display Super Stock or Street Stock at which it will compete on left side windshield post. Must be two (2) inches tall.

More information

RULE BOOK DISCLAIMER

RULE BOOK DISCLAIMER RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These

More information

Larry King Law s Langley Speedway 2018 Super Street Division Rules

Larry King Law s Langley Speedway 2018 Super Street Division Rules Larry King Law s Langley Speedway 2018 Super Street Division Rules 1. COMPETING MODELS: A. Any American made 1979 through 1988 two door, coupe with a minimum 108 inch wheelbase. B. Cars must have a full

More information

2019 Road Warriors. Shock claim rule will be $50. Any driver finishing in the top 3 may claim shocks from any car finishing in the top 3.

2019 Road Warriors. Shock claim rule will be $50. Any driver finishing in the top 3 may claim shocks from any car finishing in the top 3. 2019 Road Warriors Protest $350 top end/ $400 bottom end any engine combination Crate engine claim rule will be $3900. Any car finishing on the lead lap may claim any engine that finishes on the lead lap.

More information

#800 to #899 Sportsman Super Stock Truck Technical Specifications

#800 to #899 Sportsman Super Stock Truck Technical Specifications #800 to #899 Sportsman Super Stock Truck Technical Specifications DEFINITION A two wheel drive, standard size pickup. The truck must be of stock production that has been produced in quantities of at least

More information

Section 10 Mini Stocks

Section 10 Mini Stocks Section 10 Mini Stocks 10.1 DEFINITION. 10.1.1 The word stock will mean unaltered as originally factory produced and installed for make. All Cars and trucks will be stock unless otherwise specified within

More information

Wingless Limited Sprint Rules CHASSIS

Wingless Limited Sprint Rules CHASSIS Wingless Limited Sprint Rules CHASSIS 1. Any type of sprint car chassis is allowed that has a minimum of 84 inches and a maximum 90 inches, measured from center of the front hub to the center of the rear

More information

All drivers must have working race radios in order to compete. Scoring Transponder is optional for 2015 but will be mandatory for 2016

All drivers must have working race radios in order to compete. Scoring Transponder is optional for 2015 but will be mandatory for 2016 Brockville Ontario Speedway 2016 BOS STREET STOCK RULES All drivers must have working race radios in order to compete. Scoring Transponder is optional for 2015 but will be mandatory for 2016 CAR ELIGIBILITY

More information

2019 Toccoa Raceway. Fuel: 110 or 114 NO OXYGENATED FUEL PERMITTED. Body:

2019 Toccoa Raceway. Fuel: 110 or 114 NO OXYGENATED FUEL PERMITTED. Body: 2019 Toccoa Raceway Stock 4 Cylinder (Window Safety Net & Mufflers are Mandatory) ** WEIGHT MUST BE POSTED ON THE TOP LEFT CORNER OF THE DRIVERS DOOR *** NUMBER MUST BE 3 TALL & VISIBLE Fuel: 110 or 114

More information

4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons).

4. Hickory little engine: 3000/1350 lbs. with driver. (3050/1375 with 500 gram pistons). 2018 Limited Late Model Stock Rules $1000 fine for tire soaking $100 fine for antifreeze The Limited Late Model Limited Division will run under the 2018 NASCAR Whelen All American Series Late Model Stock

More information

2017 PURE STOCK RULES

2017 PURE STOCK RULES 2017 PURE STOCK RULES PROTEST: 1. Engine Top $300 bottom $300 2. 602 Crate Engine $350 Top $400 Bottom 3. $100 per shock Claim Rule top three only 4. Tire Protest $100 (one tire) top three only ALL CARS

More information

2018 Mini Sport Rules

2018 Mini Sport Rules 2018 Mini Sport Rules Mini Sport 2018 revised 12/21/2016 1. ELIGIBILITY A. Front engine, compact cars and short wheel base mini trucks with conventional cabs. B. NO Convertables, Station Wagons, supercabs,

More information

MINI STOCK RULE BOOK 2019 This is a protest Division No Radios Raceeivers are mandatory!

MINI STOCK RULE BOOK 2019 This is a protest Division No Radios Raceeivers are mandatory! MINI STOCK RULE BOOK 2019 This is a protest Division No Radios Raceeivers are mandatory! Rule Book Disclaimer: The rules and/or regulations set forth herein are designed to provide for the orderly conduct

More information

2018 Senoia Raceway Rulebook Late Model Sportsman

2018 Senoia Raceway Rulebook Late Model Sportsman (Formerly B Cadet) All drivers must adhere to the general rules, in addition to the division specific rules set forth below. BODY 1. Stock appearing body may be aluminum or steel. 2. Rear of body may be

More information

General Engine Rules Common to all Makes:

General Engine Rules Common to all Makes: NEEDMORE SPEEDWAY 2017 CRATE LATE MODEL ENGINE RULES Engine in car must match manufacturer of body used. Example: Ford Thunderbird must run Ford Engine: Camaro must use Chevy Engine: Dodge Intrepid must

More information

2018 Street Stock Rules

2018 Street Stock Rules 2018 Street Stock Rules JUST BECAUSE IT DOES NOT SAY NO DOES NOT MEAN YOU CAN DO IT! $1000 fine for soaking tires. $100 fine for antifreeze. COMPETING MODELS 1968 and later approved hardtop American manufactured

More information

Engine option #1 Nesmith sealed 602 with 4412 Holley 500 cfm two barrel. 1" spacer.030 tolerance. Street Stock Rules

Engine option #1 Nesmith sealed 602 with 4412 Holley 500 cfm two barrel. 1 spacer.030 tolerance. Street Stock Rules Hobby Street Stock Rules (Updated 1/1/2019) 1. All 3300 lbs 2. Remote starter button track supplied at inspection 3. No high performance parts allowed except as stated. 4. Wheel base 108. min. 5. Stock

More information

2017 Thunder Series 602 Thunder Series Rules

2017 Thunder Series 602 Thunder Series Rules 2017 Thunder Series 602 Thunder Series Rules Chassis: 1. Must follow FASTRAK rules. 2. Chassis must be built prior to 2014 Body: 1. Must follow FASTRAK body rules 2. 8 spoiler permitted 3. No 12 side braces

More information

2017 Sportmod (B Mod) Rules

2017 Sportmod (B Mod) Rules 2017 Sportmod (B Mod) Rules FRAMES 1. 1964 or newer OEM perimeter American rear-wheeled passenger car frame only. No sports car frame. No convertible or station wagon. No stub cars 2. Frame must be full

More information

Each track is responsible for their own fuel rule Fuel is to be NON OXYGENATED and must conform to their local track

Each track is responsible for their own fuel rule Fuel is to be NON OXYGENATED and must conform to their local track Stock 4 Rule Clarification: SECA Stock 4 will go by MMSA Rules This was the intention. So if there is any discrepancy between these rules and mmsa rules then please refer to the mmsa rule book. Fuel: Each

More information

2018 Senoia Raceway Rulebook Limited Late Model

2018 Senoia Raceway Rulebook Limited Late Model All drivers must adhere to the general rules, in addition to the division specific rules set forth below. Senoia Raceway Limited Late division allows four engine packages. A. 604 Crate Engine 2250lbs 8

More information

2019 PURE STOCK RULES ALL CHANGES/MODIFICATIONS TO THE 2019 PURE STOCK RULES ARE IN RED.

2019 PURE STOCK RULES ALL CHANGES/MODIFICATIONS TO THE 2019 PURE STOCK RULES ARE IN RED. 2019 PURE STOCK RULES ALL CHANGES/MODIFICATIONS TO THE 2019 PURE STOCK RULES ARE IN RED. DRIVERS A. Driver must be at least 14 years of age. Must have Minor release form signed by parent or guardian on

More information

2019 Super Street Class Rules. All drivers are required to have their own Raceivers for one-way communication with race director official.

2019 Super Street Class Rules. All drivers are required to have their own Raceivers for one-way communication with race director official. 2019 Super Street Class Rules All drivers are required to have their own Raceivers for one-way communication with race director official. Top 3 feature finishers will be required to go to tech area after

More information

2019 ROGER WHEELER CONSTRUCTION ROAD WARRIOR RULES

2019 ROGER WHEELER CONSTRUCTION ROAD WARRIOR RULES 2019 ROGER WHEELER CONSTRUCTION ROAD WARRIOR RULES PROTEST $350 TOP END/ $400 BOTTOM END ANY ENGINE COMBINATION CRATE ENGINE CLAIM RULE WILL BE $3900. ANY CAR FINISHING ON THE LEAD LAP MAY CLAIM ANY ENGINE

More information

2015 RULES Sportsman/Super St./Outlaws

2015 RULES Sportsman/Super St./Outlaws 2015 RULES Sportsman/Super St./Outlaws For Tech Questions: Charlie Rockwell 802-355-8112 Head and neck restraint will be required (Hutchens, Hans, ect.) Safety check list for Loudon a. approved drivers

More information

2018 Bomber Rules. The rules listed below are now being enforced and are to be added into the rule book

2018 Bomber Rules. The rules listed below are now being enforced and are to be added into the rule book 2018 Bomber Rules The rules listed below are now being enforced and are to be added into the rule book for all drivers of the Bomber class to abide by. For questions contact the race track or the technical

More information

2019 Pure Thunder Stock Class Rules. All drivers are required to have their own Raceivers for one-way communication with race director official.

2019 Pure Thunder Stock Class Rules. All drivers are required to have their own Raceivers for one-way communication with race director official. 2019 Pure Thunder Stock Class Rules All drivers are required to have their own Raceivers for one-way communication with race director official. Top 5 feature finishers will be required to go to tech area

More information

2019 FIGURE 8 RULES INDEX

2019 FIGURE 8 RULES INDEX 2019 FIGURE 8 RULES INDEX Battery Body Engine Exhaust System Firewall Fuel Cell Frame Ignition System Rear End Roll Cage Seats Starter Suspension Transmission Weight Rules Wheels and Tires Page 7 Page

More information

2017 FACTORY STOCK RULES

2017 FACTORY STOCK RULES 2017 FACTORY STOCK RULES The Statement: Unless it came on a stock, mass produced vehicle, it is NOT LEGAL UNLESS SPECIFIED HERE! If it came on a stock, mass produced vehicle and it is prohibited here,

More information

Larry King Law s Langley Speedway 2018 Super Truck Division Rules

Larry King Law s Langley Speedway 2018 Super Truck Division Rules Larry King Law s Langley Speedway 2018 Super Truck Division Rules Amendments: Rules are subject to amendments at any time when ample notice has been given to enhance competition 1. COMPETING MODELS A.

More information

2018 SEASON PURE STOCK DIVISION

2018 SEASON PURE STOCK DIVISION 1188 James D. Hagood Hwy. P.O. Box 1066 South Boston, VA 24592 Office: 434-572-4947 Fax: 434-575-8992 Email: info@southbostonspeedway.com www.southbostonspeedway.com 2018 SEASON PURE STOCK DIVISION See

More information

TORC SERIES COMPETITION RULES FOR SPORTSMAN STOCK TRUCK

TORC SERIES COMPETITION RULES FOR SPORTSMAN STOCK TRUCK TORC SERIES COMPETITION RULES FOR SPORTSMAN STOCK TRUCK Defined As- A two-wheel drive standard size pickup. The truck must be of stock production that has been produced in quantities of at least 5,000

More information

Larry King Law s Langley Speedway 2018 Grand Stock Division Rules

Larry King Law s Langley Speedway 2018 Grand Stock Division Rules 2018 Grand Stock Division Rules Amendments: Rules are subject to amendments at any time when ample notice has been given to enhance competition 1. COMPETING MODELS: A. Any American made 1979 through 1988

More information

Crate Motor/Limited Late Model Rules/2019

Crate Motor/Limited Late Model Rules/2019 Crate Motor/Limited Late Model Rules/2019 MUFFLERS ARE MANDATORY/RACECEIVERS MANDATORY The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and

More information

EAST ALABAMA MOTOR SPEEDWAY 2018 HOBBY TECHNICAL RULES

EAST ALABAMA MOTOR SPEEDWAY 2018 HOBBY TECHNICAL RULES **Rules new for 2018 will be highlighted in BLUE. **Last updated on 12-22-17. EAST ALABAMA MOTOR SPEEDWAY This division is open to any 1955 or newer sedan. NO station wagons, or pick up trucks. WEIGHT:

More information

2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK STREET STOCK

2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK STREET STOCK 2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK STREET STOCK The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable

More information

Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class

Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Super Street Class Page 1 of 6 2017 Super Street Rules Vehicle 1. Any 1960 or newer sedan. 2. Chassis and suspension must remain completely

More information

PURE MINI STOCK CLAIMERS 2008

PURE MINI STOCK CLAIMERS 2008 SOUTHERN OREGON SPEEDWAY 113 Haskell St., Central Point, OR 97502 541 261 7077 Fax: 541 664 6657 Website: www.sospeedway.com PURE MINI STOCK CLAIMERS 2008 1. MODELS: A. Any front engine, front or rear

More information

WEIGHT: lbs. Aluminum body or aluminum body panels must add 50 lbs Ford rearend, floater or not, disc brakes or not, must add 100 lbs.

WEIGHT: lbs. Aluminum body or aluminum body panels must add 50 lbs Ford rearend, floater or not, disc brakes or not, must add 100 lbs. 2018 ROAD WARRIOR RULES PROTEST: 1. Top of Motor $200 Bottom $300 2. $50 per shock claim top three only. 3. Tire Protest $100 (one tire) top three only. WHEEL BASE: 1. Minimum 108 wheel base. Must match

More information

2019 Factory Stock Rules

2019 Factory Stock Rules 2019 Factory Stock Rules *ANYTHING IN RED IS ACCEPTABLE FOR 2019* BODY: Any American made stock passenger car body on a stock unaltered full frame, or Chrysler & Ford unibodies. No front wheel drives.

More information

2018 SEASON MOD 4 DIVISION See General Rules

2018 SEASON MOD 4 DIVISION See General Rules 1188 James D. Hagood Hwy. P.O. Box 1066 South Boston, VA 24592 Office: 434-572-4947 Fax: 434-575-8992 Email: info@southbostonspeedway.com www.southbostonspeedway.com 2018 SEASON MOD 4 DIVISION See General

More information

No rotation titanium or carbon fiber larger than 1.5 diameter is allowed.

No rotation titanium or carbon fiber larger than 1.5 diameter is allowed. 2017 305 SPRINT RULES January 14, 2017 General Information: The following specifications have been prepared by Mercer Raceway Park as guidelines for the construction of the 305-Sprint Division. No warranty

More information

2018 TOCCOA RACEWAY. Stock 4 Cyl. (Window Safety Net & Mufflers are Mandatory)

2018 TOCCOA RACEWAY. Stock 4 Cyl. (Window Safety Net & Mufflers are Mandatory) Stock 4 Cyl (Window Safety Net & Mufflers are Mandatory) Fuel: A) 110 Track Fuel B) NO OXYGENATED FUELS C) NO E85 Body: 2018 TOCCOA RACEWAY A) Any two or four door foreign or domestic car with a 94-101.5

More information

Natural Bridge Speedway Official 2016 Rules Sportsman

Natural Bridge Speedway Official 2016 Rules Sportsman Natural Bridge Speedway Official 2016 Rules Sportsman www.nbspeedway.com 540-451-2943 Official 2016 Sportsman Rules Natural Bridge Speedway Page 2 Rulebook Disclaimer The rules and/or regulations set forth

More information

LIMITED STOCK DIVISION SUPPLEMENT TO THE 2018 GENERAL RULEBOOK

LIMITED STOCK DIVISION SUPPLEMENT TO THE 2018 GENERAL RULEBOOK The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These rules shall govern

More information

2019 FACTORY STOCK RULES BODY: Any American made stock passenger car body on a stock unaltered full frame, or Chrysler & Ford unibodies.

2019 FACTORY STOCK RULES BODY: Any American made stock passenger car body on a stock unaltered full frame, or Chrysler & Ford unibodies. 2019 FACTORY STOCK RULES BODY: Any American made stock passenger car body on a stock unaltered full frame, or Chrysler & Ford unibodies.no front wheel drives. No Camaro, Mustangs or Station Wagons. Stock

More information

SUPER 4-CYLINDER RULES MODELS

SUPER 4-CYLINDER RULES MODELS SOUTHERN OREGON SPEEDWAY 2177 South Pacific Highway Medford, OR 97501 541-282-8066 / 1-800-963-3367 Fax: 541-774-3627 / Website: www.sospeedway.com SUPER 4-CYLINDER RULES 2009 1. MODELS A. Any front engine,

More information

2018 Toccoa Raceway. A. Stock for make and model (1 inch) tolerance SIDE TO SIDE.

2018 Toccoa Raceway. A. Stock for make and model (1 inch) tolerance SIDE TO SIDE. 2018 Toccoa Raceway Modified Street Rules (Window Safety Net & Mufflers are Mandatory) Frame: A. OEM Suspension in original location B. GM/ Metric Tubular Replacement permitted Johnson Chassis only. C.

More information

2019 Street Stock Rules

2019 Street Stock Rules Presented By 2019 Street Stock Rules 1) Car Body and Frame Any stock, production American-made vehicle including Camaro, Firebird and Mustang. Pickups will be allowed 1. Trunk pan may be removed for fuel

More information

DRIVER ELIGIBILITY GUIDELINES TO RACE CLASSES

DRIVER ELIGIBILITY GUIDELINES TO RACE CLASSES SPORTSMAN RULES DRIVER ELIGIBILITY GUIDELINES TO RACE CLASSES Any DRIVER that has won a CRATE / Limited/ Super Late Model Feature event at Boyd's Speedway in 2017 cannot register to race in any class lower

More information

MAHONING VALLEY SPEEDWAY 2019 LATE MODEL RULES ALL CARS MEETING THESE RULES & SPECIFICATIONS WILL BE ELIGIBLE TO RACE

MAHONING VALLEY SPEEDWAY 2019 LATE MODEL RULES ALL CARS MEETING THESE RULES & SPECIFICATIONS WILL BE ELIGIBLE TO RACE MAHONING VALLEY SPEEDWAY 2019 LATE MODEL RULES ALL CARS MEETING THESE RULES & SPECIFICATIONS WILL BE ELIGIBLE TO RACE These rules are intended to be a guideline in constructing a car. If the rules do not

More information

2019 VSP 602 Late Model Rules

2019 VSP 602 Late Model Rules 2019 VSP 602 Late Model Rules General: A. Raceceivers must always be used on track. B. Transponders must be mounted on RR Axle tube. C. Drivers must remain in car at all times when on track, unless instructed

More information

Unified Stockcar Racing Association 2017 Rules. Thunder Bomber

Unified Stockcar Racing Association 2017 Rules. Thunder Bomber Unified Stockcar Racing Association 2017 Rules Thunder Bomber GENERAL - Tech man has right to check this every week. 1 - No nitrous or traction control. 2 - After 3 times of refusing to tear down - you

More information

2018 Senoia Raceway Rulebook Bomber

2018 Senoia Raceway Rulebook Bomber All drivers must adhere to the general rules, in addition to the division specific rules set forth below. BODY 1. All bodies must be stock appearing bodies. a. Aluminum sides allowed. b. Fenders and quarter

More information

North Central Arkansas Speedway, LLC

North Central Arkansas Speedway, LLC 2018 North Central Arkansas Speedway, LLC Hobby/ Factory Stock Rules THE RULES AND/OR REGULATIONS SET FORTH HEREIN ARE DESIGNED TO PROVIDE FOR THE ORDERLY CONDUCT OF RACING EVENTS AND TO ESTABLISH MINIMUM

More information

RULE BOOK DISCLAIMER DIXIE SPECIAL EVENT PONY RULES

RULE BOOK DISCLAIMER DIXIE SPECIAL EVENT PONY RULES RULE BOOK DISCLAIMER The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These

More information

2012 Pro Stock Rules

2012 Pro Stock Rules 2012 Pro Stock Rules Areas highlighted in red are changes for 2012 Revised 5-5-2012 PRO STOCK: Any North American made car 1968 to present. This division was created as a controlled, economical and competitive

More information

2018 Mini Truck Rules

2018 Mini Truck Rules 2018 Mini Truck Rules The following rules are set as a guide, and are in no way a guarantee against injury or death to participants, or others. If there are any concerns not covered in these rules, consider

More information

2019 AMERICAN MUSCLE RULES AKA SUPER STOCK

2019 AMERICAN MUSCLE RULES AKA SUPER STOCK 2019 AMERICAN MUSCLE RULES AKA SUPER STOCK The rules herein shall refer to Adirondack International Speedway as AIS. These rules are intended to create affordable and fair competition. While they offer

More information

I-96 Speedway Street Stock Rules

I-96 Speedway Street Stock Rules I-96 Speedway 2019 Street Stock Rules Personal Protection Equipment It is the sole responsibility of each competitor for the effectiveness and proper installation, per the manufacturers specifications

More information

RIVERSIDE STOCK 2018/RULES

RIVERSIDE STOCK 2018/RULES RIVERSIDE STOCK 2018/RULES MUFFLERS MANDATORY/RACECEIVERS MANDATORY The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum

More information

2017 UPDATE 3/6/17 Thunder Car Rules

2017 UPDATE 3/6/17 Thunder Car Rules Mt. Lawn Speedway 2017 UPDATE 3/6/17 Thunder Car Rules The absence of a particular rule does NOT necessarily mean its approval! FRAME 1. Any 1968 and newer, full frame, rear wheel drive full sized car,

More information

Location: Stock location for Make / Model / Year. Option 1 Properly Sealed GM 602 Crate Motor in any make car. (Must run 500cfm Holley 2 barrel)

Location: Stock location for Make / Model / Year. Option 1 Properly Sealed GM 602 Crate Motor in any make car. (Must run 500cfm Holley 2 barrel) FACTORY STOCK RULES The Statement: Unless it came on a stock, mass produced vehicle, it is NOT LEGAL UNLESS SPECIFIED HERE! If it came on a stock, mass produced vehicle and it is prohibited here, it is

More information

PRO-4 MODIFIEDS 2017 RULES

PRO-4 MODIFIEDS 2017 RULES PRO-4 MODIFIEDS 2017 RULES 1. CAGES / CHASSIS a. Fabricated Chassis only. b. Minimum 1 1/2" Diameter.095 wall tubing. c. Must be 4-post cage with a minimum of 3 U-shaped door bars on drivers side; door

More information

2018 TOCCOA RACEWAY 9: THERE WILL BE A $3800 CLAIM RULE ON A CRATE ENGINE. IF YOU CLAIM THIS ENGINE YOU ARE NOW RESPONSIBLE FOR THIS ENGINE

2018 TOCCOA RACEWAY 9: THERE WILL BE A $3800 CLAIM RULE ON A CRATE ENGINE. IF YOU CLAIM THIS ENGINE YOU ARE NOW RESPONSIBLE FOR THIS ENGINE 602 Sportsman Rules (Window safety net & mufflers are mandatory) 2018 TOCCOA RACEWAY ENGINE RULES: 1. CHEVROLET PERFORMANCE PART NUMBER 88958602/19258602 2. THE SEALED ENGINES MUST REMAIN INTACT AND NOT

More information

WILD BILL S RACEWAY MODIFIED RULES 2010

WILD BILL S RACEWAY MODIFIED RULES 2010 WILD BILL S RACEWAY MODIFIED RULES 2010 1. SAFETY: Snell 2000 helmet required and must be worn at all times car is on track (SA 2005 recommended). Roll bar padding (fire retardant recommended) driver compartment.

More information

2018 New Egypt Speedway Street Stock Division Rules I. General

2018 New Egypt Speedway Street Stock Division Rules I. General 2018 New Egypt Speedway Street Stock Division Rules I. General A. The New Egypt Speedway Street Stock class is intended to be a low budget/entry level division. The intent is to keep costs low by using

More information

2012 Street Stock Rules

2012 Street Stock Rules Rules & Regulations Updated 11/26/11 CHASSIS: 1. Cars must be 1960 or newer, stock passenger type cars. 2. No Commercial vehicles, convertibles, sports cars or Novas allowed. No leaf spring cars. 3. Frame

More information

2019 SK Modified Open Engine Rules Supplement

2019 SK Modified Open Engine Rules Supplement 2019 SK Modified Open Engine Rules Supplement 20E- 5 GENERAL ENGINE REQUIREMENTS Engine must be OEM cast iron V8 production block, or the Dart SHP Block. Cylinder heads must be OEM or Dart 10024266, and

More information

2018 Salina Highbanks Speedway Super Stock Rules

2018 Salina Highbanks Speedway Super Stock Rules 2018 Salina Highbanks Speedway Super Stock Rules Changes and clarifications highlighted SAFETY 1. Raceivers will be MANDATORY in 2018. 2. All holes in firewall must be sealed off from engine compartment

More information

Section 10 LATE MODEL DIVISION

Section 10 LATE MODEL DIVISION Section 10 LATE MODEL DIVISION 2/2/14 REVISION General Rules and Regulations RULES AT A GLANCE Stock or Fabricated Perimeter Chassis 2900 lbs Total minimum Weight with driver after any points paying or

More information

2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK LIMITED LATE MODEL

2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK LIMITED LATE MODEL 2018 BLUE RIDGE MOTORSPORTS PARK RULEBOOK LIMITED LATE MODEL The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable

More information

2018 FACTORY STOCK RULES as of 12/04/17

2018 FACTORY STOCK RULES as of 12/04/17 Track Promoter, Tony Dycus: email - Tony.Dycus@yahoo.com phone - 214-502-7406 Track Phone: (817) 478-RACE (7223) Physical Address: 6737 Hudson Village Creek Rd. Kennedale, Texas 76060 Mailing Address:

More information

Langley Speedway 11 Dale Lemonds Drive Hampton, VA (757) 865 RACE(7223) 2015 GRAND STOCK DIVISION RULES

Langley Speedway 11 Dale Lemonds Drive Hampton, VA (757) 865 RACE(7223) 2015 GRAND STOCK DIVISION RULES Langley Speedway 11 Dale Lemonds Drive Hampton, VA. 23666 (757) 865 RACE(7223) www.langley-speedway.com 2015 GRAND STOCK DIVISION RULES PERSONAL SAFETY EQUIPMENT Each competitor is solely responsible for

More information

Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Enduro Class

Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Enduro Class Crisp Motorsports Park Watermelon Capital Speedway Race Rules Race Car Enduro Class Page 1 of 5 2018 Enduro Class Rules The rules for the Enduro class are set in an effort to conform with other area tracks

More information

2015 Pro Truck Rules Rules and Specifications Weight - Interior: Body:

2015 Pro Truck Rules Rules and Specifications Weight - Interior: Body: 2015 Pro Truck Rules The rules and/or regulations set forth herein provide for the orderly conduct of racing events and to establish minimum acceptable requirements of such events. These rules shall govern

More information

Red Dirt Raceway - Pure Stock Rules(Stock Car) 2019 RULE CHANGES ARE IN RED AGE REQUIREMENT

Red Dirt Raceway - Pure Stock Rules(Stock Car) 2019 RULE CHANGES ARE IN RED AGE REQUIREMENT Red Dirt Raceway - Pure Stock Rules(Stock Car) 2019 RULE CHANGES ARE IN RED AGE REQUIREMENT -Drivers must be a minimum of 14 years old with no exceptions. See general track rules for more info on drivers

More information

2018 Roadrunner Rules

2018 Roadrunner Rules 2018 Roadrunner Rules BIG DIAMOND SPEEDWAY 2018 ROADRUNNER RULES The purpose of this division is to create a controlled, economical, competitive form of racing. The primary concern is to keep the cars

More information

dog hollow speedway official 2014 crate late model rules

dog hollow speedway official 2014 crate late model rules dog hollow speedway official 2014 crate late model rules 1. ENGINE GM PART NUMBER 88958602 & GM PART NUMBER 88958604. THESE ENGINES ARE SEALED AT THE INTAKE MANIFOLD, CYLINDER HEAD, FRONT COVER, AND OIL

More information

2012 Roadrunner Rules

2012 Roadrunner Rules 2012 Roadrunner Rules Areas highlighted in red are changes for 2012 Revised 4-8-12 The purpose of this division was to create a controlled economical, competitive form of entry-level racing. The primary

More information

RACECEIVERS MANDATORY: TRANSPONDERS MANDATORY: IT IS THE DRIVERS RESPONSIBILITY TO HAVE THEM IN WORKING ORDER TO RACE AT THUNDERBIRD RACEWAY.

RACECEIVERS MANDATORY: TRANSPONDERS MANDATORY: IT IS THE DRIVERS RESPONSIBILITY TO HAVE THEM IN WORKING ORDER TO RACE AT THUNDERBIRD RACEWAY. Street Stock Rules 2018 General It is the sole responsibility of each competitor for the effectiveness and proper installation per the manufacturer s specifications to be adequate for competition at every

More information