Toyota Multi-kit 2000-up (see application list on page 2)

Transcription

1 Installation Instructions for KIT FEATURES ISO DIN radio provision with pocket Double DIN radio provision Toyota Multi-kit 2000-up (see application list on page 2) WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: harness or TYTO-01 premium interface Antenna Adapter: 40-LX11 (select models only) KIT COMPONENTS A) Radio housing trim panel B) Bracket #1 C) Bracket #2 D) Bracket #3 E) Bracket #4 F) Bracket #5 G) Pocket H) (4) #8 x 3/8 truss-head Phillips screws A B C D E TOOLS REQUIRED Panel removal tool Phillips screwdriver F G H CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. NOTE: Refer to the instructions included with the aftermarket radio.

2 Applications Pontiac Vibe Scion FR-S 2013-up iq 2012-up tc 2005-up xa xb 2004-up xd 2008-up Subaru BRZ 2013-up Toyota 4 Runner (excluding Limited) Celica Corolla 2009-up Echo FJ 2007-up Highlander Highlander 2013 Matrix MR2 Spyder RAV Sequoia Tundra Yaris 2012-up Yaris (3-door) Yaris (4-door)

3 Dash Disassembly Toyota Yaris (3-door and 4-door) Toyota Yaris 2012-up 1. Unclip the bottom trim panel located underneath the A/C controls. 2. Unclip the two side trim panels that surround the A/C controls and radio. 3. Unclip the instrument trim panel surrounding the speedometer and gauges. 4. Unclip the radio/ac vents trim panel. 5. Remove (4) Phillips screws securing radio. (Figure C) 6. Unplug and remove radio. 1. Unclip and remove entire panel including a/c vent on passenger side of dash. 2. Unclip and remove the panel from around the radio. 3. Remove four 10 mm bolts and remove factory radio. (Figure C) (Figure C)

4 Dash Disassembly Toyota FJ 2007-up 1. Remove two Phillips screws from bottom part of side trim panels. 2. Using a panel removal tool, carefully remove the side trim panels. 3. Remove (2) Phillips screws from radio trim panel. (Figure C) 4. Using panel removal tool, carefully remove radio trim panel. (Figure D) 5. Remove (4) 10 mm bolts securing the radio. 6. Unplug and remove radio. (Figure C) (Figure D)

5 Dash Disassembly Toyota Corolla 2009-up 1. Unclip and remove the (4) side trim panels from the right and left side of the radio and a/c controls. 2. Unclip and remove the a/c vent panel above the factory radio. 3. Remove (4) 10 mm bolts securing the radio. (Figure C) 4. Remove (8) screws securing the brackets to the factory radio and remove the brackets. (Figure D 5. Remove (4) plastic clips from the back of the factory radio. Note: retain clips for re-use during kit assembly. (Figure C) (Figure D) Remove REMOVE (4) SCREWS screws from factory bracket from FROM each FACTORY sidebracket FROM EACH SIDE

6 Dash Disassembly Toyota MR2 Spyder Toyota RAV Unsnap the lower trim piece from each side of the dash console and remove (2) Phillips screws exposed in each cavity. 2. Remove the upper trim piece from each side of the console. 3. Remove the climate control knobs and (2) Phillips screws exposed. 4. Remove the climate control trim bezel. 5. Remove the ashtray and (1) 10 mm bolt exposed. 6. Unclip the ashtray trim bezel and remove. 7. Unclip the radio trim bezel, remove (4) Phillips screws securing the unit and disconnect the wiring. 1. Remove (4) 3/16 Allen screws from the radio trim bezel and remove the bezel. 2. Remove (4) 10 mm bolts securing the factory radio and disconnect the wiring.

7 Toyota Highlander Pull and remove dash panel from radio and climate controls. Tip: There are 8 clips. 2. Remove (6) 10 mm bolts from radio and climate controls assembly. 3. Remove assembly and disconnect the wiring. 4. Remove (8) Phillips bolts and (4) Phillips screws to separate brackets from assembly. (Figure C) (Figure C)

8 Dash Disassembly Toyota Matrix, Pontiac Vibe Unclip the bottom edge of the radio trim panel then lift up and out to remove. 2. Remove (4) 10 mm bolts securing the factory radio. TUNE SEEK TRACK AM FM1 FM2 DISK SCAN

9 Dash Disassembly Toyota 4 Runner (excluding Limited) 1. Unsnap and remove trim from around shifter. 2. Unsnap and remove trim covers from around center console pocket edge at front and rear of console. 3. Unsnap and remove center console cover. 4. Unsnap trim ring from around ignition key cylinder. 5. Remove (1) 10 mm bolt from bottom right of panel below steering column. Unsnap panel and pull away to gain access behind panel. 6. Remove (1) 10 mm bolt on bottom left of center panel behind panel below steering column. 7. Remove (1) 10 mm bolt beneath climate control behind pocket door. Unsnap and remove climate control. (Figure C) 8. Remove (2) 10 mm bolts beneath radio behind climate controls. 9. Unsnap and remove entire center panel around radio. (Figure D) 10. Remove (2) 10 mm bolts securing radio to remove. (Figure C) (Figure D)

10 Dash Disassembly Toyota Celica Toyota Echo Unclip and remove the gear shifter trim bezel and remove (2) Phillips screws exposed below the climate controls. 2. Pull off climate control knobs and remove (2) Phillips screws exposed. 3. Unclip the climate control/factory radio trim bezel and remove. Remove (4) 10 mm screws securing the factory radio and disconnect the wiring. 1. Remove the climate control knobs and (2) Phillips screws exposed. 2. Unclip and remove the climate control trim bezel. 3. Depress the side clips securing the climate control panel and move the panel to access (2) Phillips screws from the top of the factory radio brackets. 4. Remove the ashtray. 5. Unclip and remove the radio trim bezel. 6. Remove (2) Phillips screws from the bottom of the radio brackets and disconnect the wiring.

11 Dash Disassembly Toyota Sequoia Toyota Tundra Position vents facing upward and remove (1) Phillips screw from each A/C vent. 2. Unclip and remove entire radio trim panel including climate controls. 3. Remove (4) 10 mm bolts to remove radio. (Figure C) 1. Remove the (3) climate control knobs by pulling straight outward. 2. Remove (3) Phillips screws from behind knobs. 3. Position vents facing upward and remove (1) Phillips screw from each A/C vent. 4. Unclip and remove entire radio trim panel including climate controls. (Figure C) 5. Remove (4) 10 mm bolts to remove radio. (Figure D) (Figure C) (Figure C) (Figure D)

12 Dash Disassembly Toyota Highlander Unclip and remove the A/C vent panel. 2. Unclip and remove the trim panel containing the A/C control and pocket. 3. Remove (4) 10 mm bolts securing the radio assembly. (Figure C) 4. Remove the (4) Phillips screws securing the clock/display then remove the clock/display from the radio assembly. (Figure D) (Figure C) (2) Screws TWO on each SCREWS side ON EACH SIDE Side SIDE view VIEW clock/display CLOCK/DISPLAYradio RADIO assembly ASSEMBLY (Figure D)

13 Dash Disassembly Scion FR-S 2013-up, Subaru BRZ 2013-up 1. Unclip and remove the panel from around the radio. 2. Remove four 10 mm bolts, then remove the factory radio.

14 HI HI Dash Disassembly Scion xa Pull outward on the (3) climate control knobs and remove. 2. Remove (2) Phillips screws from behind the outer two climate knobs. 3. Unsnap and remove the trim pieces on each side of the climate control/ashtray/pocket assembly. (Figure C) 4. Remove (2) Phillips screws from the bottom of the climate control/ radio trim panel and unsnap and remove the entire panel. (Figure D) 5. Remove (4) 10 mm bolts securing the radio. Unplug and remove the radio. (Figure E) (Figure D) OFF HI OFF HI OFF (Figure E) OFF (Figure C)

15 OFF HI Dash Disassembly Scion xb Scion xb 2008-up 1. Pull outward on the (3) climate control knobs and remove. OFF HI 1. Unclip and remove the trim panel around the radio including the A/C vents. 2. Remove (2) Phillips screws from behind the outer (2) knobs. 2. Unclip and remove the trim panel at the bottom edge of the dash cavity. 3. Unsnap and remove the entire panel surrounding the climate controls and the radio. (Figure C) 3. Remove (4) 10 mm bolts securing the radio. Unplug and remove the radio. 4. Remove (4) 10 mm bolts securing the radio. Unplug and remove the radio. OFF HI (Figure C)

16 Dash Disassembly Scion tc Scion tc 2011-up 1. Unsnap trim from around shifter, not necessary to completely remove. 2. Unsnap and remove panel from around radio, including climate controls and radio door. 3. Remove (2)10 mm nuts from the top mounting locations and (2) Phillips screws from the bottom mounting locations to remove the radio. (Figure C) 1. Unsnap and remove the panel from around the radio. 2. Remove four 10 mm bolts and remove factory radio. (Figure C)

17 Kit Assembly Scion xd 2008-up Scion iq 2012-up 1. Unclip radio trim panel. Unplug and remove panel. 2. Remove (4) Phillips screws securing the radio. Unplug and remove radio. 1. Unclip and remove the climate control panel. 2. Unclip and remove the panel from around the radio. 3. Remove four 10 mm bolts and remove factory radio. (Figure C) (Figure C)

18 Kit Assembly Bracket #1 tab layout (Drivers side shown) Bracket # Tab Vehicle 1 A Scion xb 2008-up 1 B Scion FR-S, Subaru BRZ 2013-up 1 C Scion xb D Scion xa E Toyota Yaris 2012-up 1 F Scion tc 2011-up 1 G Scion tc I Toyota FJ 2007-up 1 J Toyota Corolla 2009-up 1 K Toyota MR2 Spyder L Toyota RAV Note: It may be necessary to remove all unneeded tabs from the brackets for certain applications. Depending on the application it may also be necessary to trim the entire bracket as close as possible to the radio mounting locations on the brackets. G L E J C A J F K L D B I E F K G (on reverse side) D I B A C G

19 Kit Assembly Bracket #2 tab layout Bracket # Tab Vehicle 2 M Toyota Highlander O Toyota 4 Runner (excluding Limited) P Scion xd 2008-up 2 Q Toyota Celica M M M Note: It may be necessary to remove all unneeded tabs from the brackets for certain applications. Depending on the application it may also be necessary to trim the entire bracket as close as possible to the radio mounting locations on the brackets. P M Q O (on reverse side) O P O Q

20 Kit Assembly Bracket #3 tab layout Bracket # Tab Vehicle 3 S Toyota Yaris (3-door) T Toyota Sequoia T Toyota Tundra Note: It may be necessary to remove all unneeded tabs from the brackets for certain applications. Depending on the application it may also be necessary to trim the entire bracket as close as possible to the radio mounting locations on the brackets. S T T S

21 Kit Assembly Bracket #4 tab layout Bracket # Tab Vehicle 4 U Toyota Yaris (4-door) V Toyota Highlander 2013 Note: It may be necessary to remove all unneeded tabs from the brackets for certain applications. Depending on the application it may also be necessary to trim the entire bracket as close as possible to the radio mounting locations on the brackets. U V V V U V

22 Brackets #1 and #5 tab layout (Scion iq, 2012-up) Bracket # Tab Vehicle 1 (left side bracket only) H Scion iq 2012-up 5 H Bracket 1 (left side bracket only) Note: It may be necessary to remove all unneeded tabs from the brackets for certain applications. Depending on the application it may also be necessary to trim the entire bracket as close as possible to the radio mounting locations on the brackets. H Bracket 5 H H H

23 Kit Assembly Brackets #2 and #5 tab layout (Toyota Matrix, Pontiac Vibe, ) Bracket # Tab Vehicle 2 (left side bracket only) N Toyota Matrix, Pontiac Vibe N Note: It may be necessary to remove all unneeded tabs from the brackets for certain applications. Depending on the application it may also be necessary to trim the entire bracket as close as possible to the radio mounting locations on the brackets. Bracket 2 (left side bracket only) N Bracket 5 N N N

24 Kit Assembly Brackets #2 and #5 tab layout (Toyota Echo, ) Bracket # Tab Vehicle 2 (left side bracket only) R Toyota Echo R Note: It may be necessary to remove all unneeded tabs from the brackets for certain applications. Depending on the application it may also be necessary to trim the entire bracket as close as possible to the radio mounting locations on the brackets. R Bracket 2 (left side bracket only) Bracket 5 R R

25 Kit Assembly ISO DIN radio provision 1. Attach your corresponding bracket to the radio housing trim panel. (Bracket #3 shown) 2. Mount the pocket to the bracket/ panel assembly with the (4) #8 x 3/8 Phillips screws supplied. 3. Slide the radio into the assembly and secure with screws supplied with the radio. (Figure C) (Figure C) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly.

26 Double DIN radio provision 1. Attach your corresponding bracket to the radio housing trim panel. (Bracket #3 shown) 2. Slide the radio into the assembly and secure with screws supplied with the radio. 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly Kit Assembly