QL (AZ4) Micro Limit Switches
|
|
- Kelley Stuart May
- 6 years ago
- Views:
Transcription
1 SUMINITURE SIZE LIMIT SWITCHES QL (Z4) Micro Limit Switches High precision micro limit switches with excellent environment proofing Quickly upgraded to limit switches with lamps by mounting an LED lamp socket L socket type (roller arm) Compliance with RoHS Directive FETURES. Subminiature design The size of the actual unit is approximately /0 in the case of the plunger model and approximately /6. in the case of the arm model, that of the vertical type limit switch. Large-scale miniaturization has been achieved. Ideal for miniaturized machinery designs or highly accurate miniaturized machines.. lamp can be easily added for operations checks PRODUCT TYPE. Switch body n exposed terminal type model combined with a socket with cord for the built-in LED lamp (sold separately) easily become a limit switch with lamp. Convenient for maintenance such as operations checks. QL exposed terminal type Socket with LED lamp QL limit with lamp. With appropriate O.T. range display The arm model has a convenient appropriate O.T. range display for attachment adjustment work. This should be set so that the operations display board s indicated protrusion winds inside the protrusion on the axle receptor, permitting use under optimum conditions. Operating display board O.T. exceeded O.T. exceeded 4. Terminal uses both solder and tab (#0). O.P. accuracy of ±0. (O.P. repeated accuracy initially ±0.0) achieved ttachment accuracy improved greatly The plunger model has achieved a high O.P. repeated accuracy of within 0.0mm through the development of a unique switch mechanism and a standard attachment surface on the upper surface of the unit (a surface with no slants.) lso, through a unique mechanism that permits adjustment of the O.P. in each individual product at the time of assembly, an O.P. accuracy of ±0.mm.00inch can be safeguarded between lots, so that almost no operating position adjustment is required during either attachment or replacement. 6. subminiature limit switch with a great stroke margin (O.T./T.T.) The T.T. has been enlarged by using a switching mechanism by coil spring for QL. 7. Long life The unit has a long mechanical life of minimum 0 7 times and a long electrical life of min. 0 times (, 0V C resistance load) by means of a silver alloy contact with excellent solvent-proof characteristics and a guaranteed wiping operation that possesses two hinges and switching method by coil spring.. mechanism with excellent environment proofing protective construction equivalent to IEC IP64 The actuator has an axle seal with special packing, and the main case and terminals have both a waterproof ring and an epoxy-sealed mechanism. lso, the entire mechanism is water-proof due to the optional socket. Socket with cord type... IP64 equivalent sturdy, shockproof construction The body uses die-cast zinc, and the actuator uses stainless steel. Moreover, shock absorbers have been added to lessen the shock during plunger release. TYPICL PPLICTIONS ny application where compactness, density, and robustness, such as subminiaturized machines and plant machinery, is required. ctuator Exposed terminal type L socket type* Socket with cord type* Z400 Z460 Z470 Roller plunger Z400 Z460 Z470 Cross roller plunger Z400 Z460 Z470 Roller arm Z4004 Z4604 Z4704 djustable rod Z4007 Z4607 Z4707 djustable roller arm Z400 Z460 Z470 Notes) Vertical type pprox. /0 r Plunger model QL LED lamp ppropriate range Insufficient O.T. range ppropriate range. Cadmium free contact types are available on a custom-made basis. Please add an F to the end of the part number when ordering.. *L socket type or socket with cord type is combination of; L socket type = Exposed terminal type + L socket, Socket with cord type = Exposed terminal type + Socket with cord type (cord length: m). UL recognized, CS certified type available. When ordering, add suffix 9 to part No.. (For the socket with cord type, only UL recognized type available with suffix 9 to the part No.) Phone: Fax: Web: info@ctiautomation.net
2 . Socket. Socket with LED Notes) pplicable limit switches Specifications Part No. L socket Socket with cord ( m) Z07 Exposed terminal types Socket with cord ( m) Z7 Socket with cord ( m) Z7 Socket with cord ( m) Z7 pplicable limit switches Lamp connection Lamp rating Part No. 6V DC Z076 Normally open connection V DC X076 Exposed terminal types 4V to 4V DC Z076 6V DC Z076 Normally closed connection V DC Z076 4V to 4V DC Z076. Types with 4 to 4V DC lamp rating are recommended for PC input use.. The following cord lengths are also available and lot-produced upon request. length m 6.6ft. m 9.4ft. m 6.404ft. FOREIGN STNDRDS Part No. Z 7 6 Z 7 6 Z 7 6 The th digit (boxed) of product code denotes the length of cord. Numerals come in the asterisked (*) digits, which show the lamp specifications. The 7th digit: : N.O. connection, : N.C. connection The 9th digit: None: 4 to 4V DC, : V DC, : 6V DC Standards pplicable product Part No. File No. : E UL recognized product Ratings : 0V C Product type : ll products File No. : LR0 dd 9 to the end of the part No. CS certified product Ratings : 0V C Product type socket with cord types. : ll products excluding SPECIFICTIONS. Rating Rated control voltage V C 0V C 0V DC V DC Resistive load (cos φ]) Inductive load (cos φ]0.4). Characteristics Contact arrangement From C Initial contact resistance, max. 0 mω (y voltage drop to 6V DC ) Contact material g alloy (Contains cadmium.) Initial insulation resistance (t 00V DC) Min. 00MΩ etween non-consective terminals 000 Vrms for min Initial breakdown voltage etween dead metal parts and each terminal 00 Vrms for min Shock resistance Vibration resistance Expected life (min. operations) mbient temperature mbient humidity Max. operating speed. Operating characteristics etween ground and each terminal In the free position In the full operating position Mechanical Electrical Characteristics Operating Force Release Force ctuator [O.F.] (N{gf}) max. [R.F.] (N{gf}) min. 6.6 {700} Roller plunger Cross roller plunger Roller arm djustable rod djustable roller arm Note) For the operating characteristics, refer to the TECHNICL INFORMTION. 4. Protective characteristics Protective construction IEC Switch body IP64 IP6 IP66 Note) For the switch proper, protect its terminals. Pretravel [P.T.], max. mm inch 00 Vrms for min Max. 00 m/s {pprox. 0G} (djustable rod type and adjustable roller arm type: Min. 00m/s {pprox. 0G} 0 to Hz, double amplitude of. mm 0 7 (at 0 cpm) 0 (at 0 cpm, 0V resistive load) 0 to +60 C 4 to +40 F Max. 9% R.H. 0 cpm Movement Differential [M.D.] max. mm inch Overtravel [O.T.], min. mm inch Totaltravel [T.T.], min {70} { {70} {700} 0.69 {70} {40} 0.4 {} ± {40} to. {} 0.4 {} to 0.06 {6} ± {40} to.0 {0} 0.4 {} to 0. {} ± 0 L socket type Type with socket and cord. LED rating QL (Z4) Rated operating voltage Operating voltage range Internal resistance 6V DC to V DC.4kΩ V DC 9 to V DC 4.7kΩ 4 to 4V DC 0 to V DC kω Phone: Fax: Web: info@ctiautomation.net
3 QL (Z4) DT. Life curve No. of operations (0 4 ), DIMENSIONS. L socket type Operating rate: 0 cpm 0 V C Resistive load 4 pplied load () Z460 90g (Set with Z400 exposed terminal type and L socket.) Cross roller plunger Z460 max.(p.t.) ±0..677± M socket. max.(p.t.).09.±0..004±.00 M socket (Set with Z400 exposed terminal type and L socket.) djustable rod dia..0 dia. stainless rod Presettable at any angle ( in the 60 range ).97 M4 rod fastening plate screw Rod fastening plate Z g. Exposed terminal type () (.94) (.) (.0). ctual load life curve (relay coil load) No. of operations (0 4 ).0± dia ±0..±.00 4±0..±.00. () (.94).9 (.) (.0) PT ± (Set with Z4007 exposed terminal type and L socket.) Z400 (.) (.).9.0± dia djustable length rod (00) (.94.97) 4 dia.., (NK) (HC) (HP) (HG) 0 (VC0) (FC-0) 60 (FC-) 700 (FC-00) Various relay loads (V) Note) The FC magnetic contactor series is 00 V C. The NK is Form C 4 V DC type. 4 dia... dia. stainless steel plunger.6.06 M (P=.) head section M hexagon nut Mounting metal.7 M6 mounting metal fastening.4 screw.0± with hexagonal -4.±0. dia. -.77±.00 dia. holes ±0..±.00 M(P=.). head section M M socket (etween side.9.94 distance ) (.) (.0) max. (P.T.) ± ± ±.00-4.±0. dia. -.77±.00 dia. 4±0..±.00 Note) The following types are also available. Roller plunger: Z400 Cross roller plunger: Z400 Roller arm: Z4004 djustable rod: Z4007 djustable roller arm: Z400 4 dia.. dia dia..4.0 dia. stainless steel roller M (P=.) head section M hexagon nut 7.±.469±.09 (4.6) (.79) dia.. stainless steel plunger quick connecting terminal (#0).6 Roller pluger Roller arm Z460 90g max.(p.t.).09.±0..004± M socket (Set with Z400 exposed terminal type and L socket.) WIRING DIGRMS ±0..±.00. () (.94).9 (.) (.0) 4..0± ±0. dia. -.77±.00 dia. M(P=.) head section M. (etween side distance ).9.94 (Set with Z4004 exposed terminal (.) (.0) type and L socket.) QL.0± dia dia.. PT ± (.7) (.).. dia dia..60 stainless steel roller M4 arm R M4 arm fixing fixing nut (with hexagonal holes) Z g djustable roller arm 4±0..± COM N.C. N.O. 0.. dia..4.0 dia. stainless steel roller.6 M (P=.) head section M hexagon nut General tolerance: ±0.4 ± M socket.±.00±.09.± 7 min..± ±.±.09.6 General tolerance: ±0.4 ±.06 PT ± 44.6±.. dia. (.).49.0 dia. (.7).76± ± stainless steel roller.9±.6±.09 Presettable at any angle 6 ( ).4±.09 in the 60 range.60 djustable.9± length rod.9±.09 M4 arm fastening plate screw (~) (.94~.6) rm fastening plate 4. Mounting metal Z460 4±0..6.±.00.7 M6 mounting metal fastening 4. screw 97g.0± with hexagonal holes. -4.±0. dia ±.00 dia. M(P=.). head section M M socket (etween side.9.94 (46.6) distance ) (Set with Z400 (.) (.0) (.) exposed terminal type and L socket.) General tolerance: ±0.4 ±.06. Socket with cord type 4 dia. dia. max. (P.T.).4. dia stainless steel plunger ± ±.00 lack COM Red N.C. White N.O. (Set with Z400 exposed terminal type and Z07 socket with cord.) Z ±.00-4.±0. dia. -.77±.00 dia M mounting screw pprox. 000 Vinyl cabtire cord (VCTF) 0.7 E-wire 4. ±.±.079 Note) The following types are also available. Roller plunger: Z470 Cross roller plunger: Z470 Roller arm: Z4704 djustable rod: Z4707 djustable roller arm: Z470 mm inch.6.06 General tolerance: ±0.4 ±.06 Phone: Fax: Web: info@ctiautomation.net
4 SOCKETS L socket 0.94 QL (Z4).6 mm inch Terminal case Socket.97 Terminal body Terminal receptacle Hexagonal nut Waterproof ring. Rubber packing t=0.±0. M. Head section M Terminal number Terminal COM N.C. N.O. dia. dia. (.) (.0) General tolerance: ±0.4 ±.06 Socket with cord Z07 (cord length: m) weight: g Socket body (PVC).97 Waterproof ring Socket (t=0.±0.) pprox ±.±.079 Terminal number color Terminal (lack) COM R (Red) N.C. W (White) N.O. 0±.77±. General tolerance: ±0.4 ±.06 Socket with LED LED lamp Socket body (PVC) (t=0.±0.) pprox ± 0±.± ±. Rubber packing.97 Waterproof ring Socket max..09 LED (Red) Z076 (cord length: m) LMP LIGHTING CIRCUIT. Load at N.O. side Use normally open (N.O.) connection terminal. LED will be turned on when switch is in free position, when switch is on, LED will be turned off. Load N.O. N.C. LED COM. Load at N.C. side Use normally closed (N.C.) connection terminal. LED will be turned off when is in free position, when switch is on, LED will be turned on. Load LED N.O. N.C. COM Terminal number color Terminal (lack) COM R (Red) N.C. W (White) N.O. General tolerance: ±0.4 ±.06 Notes). Keep possible leakage current (see the CUTIONS) in mind in order to prevent the load from malfunctioning.. Types with the 4 to 4V DC lamp rating are recommended for sequencer input use.. Connect the red and black leads to the positive and negative v terminals, respectively, for the N.C. type, and the white and black leads to the positive and negative v terminals, respectively, for the N.O. type. + DC power source + DC power source Phone: Fax: Web: info@ctiautomation.net
5 QL (Z4) MOUNTING METHOD. L socket type ) fter loosening the L socket fastening screws, grasp the terminal cover and pull it away from the switch body. ) Remove the from the terminal block. (Remove with the terminal receptacle.) Pull away from the body. ) fter the terminals have been properly crimped in the terminal body, insert the body into the terminal case. (When inserting the body, be careful not to block the hole for the with the wires.). Socket with cord (including socket with lamp) ) pply the rubber packing over the terminals, then insert the socket with cord into the switch body. Turn counterclockwise. Terminal receptacle ) Loosen the hexagonal nut and remove the rubber bushing and washer from the inside. Turn counterclockwise. 9) Temporarily screw in the fastening screw through the terminal body, then insert the washer and rubber bushing into the cord opening of L socket. Tighten it with a wrench or pliers. ) Screw the socket into the switch body and tighten it. 4) Select cord from applicable wire table. ) Decide which direction the cord outlet is to face and strip the sheath accordingly. (See page 4.) 6) fter passing the applicable cord through the hexagonal nut, bushing, and washer in that order, pass the cord through the terminal case. 7) fter stripping the cord sheath, insert the corresponding wires into the grooves of the terminal body up to the wire stop, then crimp the terminal receptacle over the wires with a pair of pliers. 0) pply the rubber packing over the terminals, then insert the L socket into the switch body. ) Tighten the into the switch body. Clockwise direction Mounting The QL micro limit switch is manufactured with a very small variation in the distance between the datum plane and the operating point. When the operating point has been accurately established and the mounting position clearly determined, two M4 bolts should be used securely fastening the switch. Operating position Mounting datum plane Terminal body connection diagram Terminal receptacle Lead wire Mounting plate M4 fastening bolts Lead wire stop Terminal body Clockwise direction Phone: Fax: Web: info@ctiautomation.net
6 QL (Z4) CORD OUTLET DIRECTION ND SHETH STRIPPING DIMENSIONS The cord outlet direction is selected from () of the (4) drawings below, and the cord is stripped to match the desired dorection () () () (4) QL Standard Packaging condition Note: The stripping of the cord is based on a length for dimension as standard and should be stripped accordingly. L socket direction Terminal () and () direction are aligned. Terminal () and () direction are aligned. Terminal () and () direction are aligned. Terminal () and () direction are aligned. sheath stripping dimensions To () 6 (N.O., N.C.) To ().60 To () (COM).66 To () (N.O.).66 6 (COM) To ().60 To () 4 (N.C.). 4 (COM) To (). To () To () 6 (N.O., N.C.).60 To () 6 (COM) To ().60 To () (N.C.).66 4 (N.O.). plicable wire Wire name Vinyl cabtire cord (VCTF) pplicable wire Conductor Wire strand Finished outside diameter 0.7 mm -wire 6.6mm.6 inch dia. -wire 7.mm. inch dia. CUTIONS. mbient conditions ) The use of these switches under the following conditions should be avoided. If the following conditions should become necessary, we recommend consulting us first. Use where there will be direct contact with organic solvents, strong acids or alkalis, or direct exposure to their vapors. Use where inflammable or corrosive gases exist. ) ecause these switchies are not of water resistant or immersion-proof construction, their use in water or oil should be avoided. lso, locations where water or oil can normally impringe upon the switch or where there is an excessive accumulation of dust should be avoided.. Wiring ) lthough QL limit switches have large over-travel (O.T.), excessive O.T. will occur wear and change in its characteristics. Specifically, where there is a need for long life, it is recommended that the proper O.T. should be used. When the operating object is in the free condition, force should not be applied directly to the actuator. ) Use their own accessories when mounting and wiring QL limit switches so as to maintain their own characterisrics. ) In order to maintain the reliability at a high level under practical conditions of use, the actual operating conditions should be checked for the benefit of the quality of the product. 4) Do not use the switch in a silicon atmosphere. Case should be taken where organic silicon rubber, adhesive, sealing material, oil, grease or lead wire generates silicon. ) void use in excessively dusty environments where actuator operation would be hindered.. Socket with LED ) The OFF condition leakage current at each voltage is as follows. Rated operating voltage 6V V 4V 4V 4 to 4V DC.6m.m V DC.6m.m 6V DC.m.6m ) Even the polarity of power source is connected in the opposite way, LED is not broken. However, LED is not lit on. Phone: Fax: Web: info@ctiautomation.net
QL (AZ4) Limit Switches
SUMINITURE SIZE LIMIT SWITCHES QL (Z4) Limit Switches High precision micro limit switches with excellent environmental protection. Quickly upgraded to limit switches with lamps by mounting an LED lamp
More informationSL (AZ3) Micro Limit Switches
SUBMINIATURE SIZE LIMIT SWITCHES SL (AZ3) Micro Limit Switches Quickly upgraded to limit switches with lamps by mounting an LED lamp socket. Rubber cover type (roller ) Compliance with RoHS Directive FEATURES
More informationVL (AZ8) Limit Switches
COMPACT SIZE LIMIT SWITCHES VL (AZ8) Limit Switches A compact and accurate vertical limit switch. Switches with indicator lamp available for convenient maintenance; either a neon AC powered lamp or an
More informationVL (AZ8) Limit Switches
COMPACT SIZE LIMIT SWITCHES Limit Switches A compact and accurate vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered lamp. With
More informationVL (AZ8) Mini Limit Switches
COMPACT SIZE LIMIT SWITCHES VL (AZ8) Mini Limit Switches A compact and accurate vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered
More informationHL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
More informationVERTICAL TYPE LIMIT SWITCHES (INCLUDES LAMP TYPE)
VERTICAL TYPE LIMIT SWITCHES (INCLUDES LAMP TYPE) Limit Switches General use vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Compact, high-performance limit switch with superior environmental resistance. Broad lineup covers from die casting cases to economical plastic cases.
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec
More informationDL (AZD1) Mini Limit Switches
COMPACT SIZE LIMIT SWITCES DL (1) Mini Limit Switches (with forced contact opening mechanism) An economic compact limit switch equipped with a forced contact opening mechanism and excellent environment
More informationSmall Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
More informationD2SW-P. Sealed Subminiature Basic Switch. Ordering Information D2SW-P
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type)
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch
More informationEnclosed Switch. Ordering Information. Economical, High Utility Enclosed Switch. Model Number Legend D4MC- List of Models
Enclosed Switch Economical, High Utility Enclosed Switch High precision and long life (10,000,000 mechanical operations) through employment of the moving spring used in OMRON Z Basic Switch. Sealed with
More informationLife PERFORMANCE Catalog listing Standards Structure Electrical performance Mechanical performance Ambient operating conditions Recommende tightening
SPATTER-GUARDED SWITCHES Model LS Effective countermeasures against the adhesion of spatter. UL/CSA/GB(CCC marking)-approved. (excluding some models) ORDER GUIDE Actuator Name Roller lever type Shape Max.
More informationD2VW. Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Model Number Legend. Sealed Miniature Basic Switch
Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationAM1 (NZ BASIC) SWITCHES
HIGH CONTACT CAPACITY, PRECISE OPERATION AM1 (NZ BASIC) SWITCHES 24.1 FEATURES 15 A High current switching capacity and high precision Wide allowance of operating speed Versatile variety of actuators UL/CSA
More information1293 Limit Switches Selection Guide
1293 Limit Classification Subminiature size (Horizontal) size (Horizontal) Product name (AZ3) Micro Limit (AZH) Limit (Die cast case) (AZH) Limit (Die cast case) (AZH) Limit (Plastic case) Appearance USE
More informationModel Number Structure
Small Sealed Switch D4E-@N Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth snap action
More informationOrdering Information. Snap Action Switch D2F. Subminiature Snap Action Switch D2F- Model Number Legend. Snap Action Switch D2F 31
Snap Action Switch Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision
More informationTURQUOISE SWITCHES ABJ TYPE
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES ABJ TYPE.5 12.8 Dust protected type Iersion protected type (wire leads bottom type) (Mounting hole 2.3 type) (Mounting hole 2.3 type) FEATURES
More informationOrdering Information. General-purpose Basic Switch X. Direct Current Switch with Built-in Magnetic Blowout. Model Number Legend
General-purpose Basic Switch X Direct Current Switch with Built-in Magnetic Blowout Incorporates a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it. Ideal
More informationHigh sensitivity. Low current load type. type. Short plunger ~ Fine plunger ~ ~ Lever ~ Roller lever ~ Short roller lever ~
6 BZ, BA, BE Series Specifications Standard Basic Switches FEATURES These Switches are Used Extensively and Have Earned the High Respect of Our Customers. Standard basic switches (BZ, BA, BE Series) are
More information10 AMP POWER RELAY. Breakdown voltage* 2. Operate time* 3 (at nominal voltage) Shock resistance. Vibration resistance. Unit weight
VDE 2c, 3c AMP POWER RELAY RELAYS 2. 1.72 FEATURES Interchangeable with existing models Long life and high reliability High contact capacity up to A 20 Available with plug-in/solder and quick-connect terminals
More informationD2HW. Sealed Ultra Subminiature Basic Switch. Ordering Information
Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action. The case dimensions are 78% of conventional models, contributing
More informationLimit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJA Series Positive opening mechanism Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives
More informationD2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationBZSeries. Basic Switches
Basic Switches BZSeries These switches have been used extensively and have earned the high respect of our cusmers. Standard basic switches BZ Series are representative of Yamatake basic switches for their
More informationAM5 (QV) SWITCHES AM5
MINIATURE SWITHES WITH HIGH PREISION (QV) SWITHES 5.9 FEATURES High precision as a result of designing ideal spring by using computer analysis O.P. 4.7±0.4mm Reliable design with shock resistance min.
More informationBZSeries. Basic Switches
Basic Switches BZSeries These switches have been used extensively and have earned the high respect of our cusmers. Standard basic switches BZ Series are representative of Yamatake basic switches for their
More informationMiniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CE Series Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationTURQUOISE STROKE SWITCHES
ULTRA-LONG STROKE, HIGH CONTACT RELIABILITY SEALED SWITCHES (SAME SIZE AS J TYPE) ASQ1 TURQUOISE STROKE SWITCHES 9.6 13.3 FEATURES (mm) http://panasonic-denko.co.jp/ ac/e/service/environment 1. Same size
More informationSubminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
More informationBasic Switches. BZ Series APPLICATIONS SELECTION GUIDE. High-quality switches with UL certification. *C-UL approval number: E96090.
Basic Switches BZ Series These switches have been used extensively and have earned the high respect of our cusmers. Standard basic switches BZ Series are representative of Azbil basic switches for their
More informationD2HW. Sealed Ultra Subminiature Basic Switch. Ordering Information
Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action. The case dimensions are 78% of conventional, contributing to
More informationSOLDER SHORT SOLDER SCREW
32 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945. CUT-A-WAY V3 MINIATURE BASIC SWITCH GENERAL INFORMATION V3 miniature basic switches feature high electrical capacity
More informationonlinecomponents.com
COMPCT CONNECTOR TERMINL FOR REDUCED WIRING CT-2 CONNECTOR TERMINL ORDERING INFORMTION TYPES RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ CT2: CT-2 connector terminal
More informationD2D. Door Interlock Power Switch with Minimum Contact gap of 3 mm. Model Number Legend. Contact Form. List of Models. Contact Specifications.
Power/oor Switch oor Interlock Power Switch with Minimum Contact gap of mm Offers the minimum contact gap of mm required for power switches as standard equipment. Safety considerations include a double
More informationTURQUOISE STROKE SWITCHES
Long Stroke and Sliding Contact Construction Sealed Switches TURQUOISE STROKE SWITCHES 13.3 10.1 (Unit: ) RoHS compliant FEATURES For pin plunger type, it maintains a long stroke OT (Over Travel) with
More informationMiniature Enclosed Limit Switch D4MC. Ordering Information. Economical, General-Purpose, Enclosed Switch. H High precision and long life (10,000,000
R Miniature Enclosed Limit Switch Economical, General-Purpose, Enclosed Switch H High precision and long life (,000,000 mechanical operations) H Gasket diaphragm seal provides high environmental resistance
More informationLimit Switches Matsushita Electric Works, Ltd. Matsushita Electric Works, Ltd. Limit Switches ARCT1B272E Please contact...
06 07 Limit Switches Limit Switches 06 07 Please contact... ARCT1B272E 200609-1YT These materials are printed on ECF pulp. These materials are printed with earth-friendly vegetable-based (soybean oil)
More informationPERFORMANCE IP67 (IEC60529, JIS C 0920) Silver contact: Max.50 mω (6 to 8 Vdc, energizing current 1A, measured by voltage drop method) Gold alloy cros
Waterproof Vertical Type Limit Switches Model VCL-mm 2 sets of SPDT built-in switches enable use as a 2-point detection switch or multi-circuit control switch. On the 2-point detection (center-neutral)
More informationVL Series. General Purpose Compact Limit Switches. Sensing and Control
FEATURES Gold plated silver contacts Compact design for small mounting space. Special design for easy wiring with ample wiring space Two-circuit double-break Diecast base and plastic cover Standard mounting
More informationonlinecomponents.com VL Series General Purpose Compact Limit Switches Sensing and Control
FEATURES Gold plated silver contacts Compact design for small mounting space. Special design for easy wiring with ample wiring space Two-circuit double-break Diecast base and plastic cover Standard mounting
More informationHigh Operating Precision Basic Switches with High Capacity and Long Life
High Operating Precision Basic Switches with High Capacity and Long Life AM1 (NZ) SWITCHES 24.1 49.2 17.5 FEATURES 10 A Current switching capacity High precision and long life Versatile variety of actuators
More informationD2MV. Highly reliable Miniature Basic Switch in spite of its Ultra-low Load action. Model Number Legend. List of Models.
Highly reliable iniature Basic Switch in spite of its Ultra-low Load action Twin crossbar contact employed for exceptionally high contact reliability. Unique internal mechanism that ensures high contact
More informationLJASeries. Limit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJASeries Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives and to acquire CE marking.
More informationD2AW. Long stroke seal switch with high reliability and high insulation performance. Model Number Legend. Sealed Ultra Subminiature Basic Switch
Long stroke seal switch with high reliability and high insulation performance Double reliability by twin contacts (=Clipping contact). Foreign materials are cleaned out by the sliding
More informationTurquoise Stroke Mini Switches
Long Stroke, Sliding Contact Construction Sealed Switches Turquoise Stroke Mini Switches 5.3 (Unit: mm) 7.85 5.3 Terminal 13.55 Wire leads RoHS compliant FEATURES Miniaturization achieved with changing
More informationUltra-miniature Size Switches with High Precision AH 1. Actuator. 0: Pin plunger 2: Hinge lever 4: Simulated roller lever N 0.25N 0.
Ultra-miniature Size Switches with High Precision AH1 (FJ) Switches Left angle terminal RoHS compliant Right angle terminal FEATURES Compact size, light weight and high precision Switches that can be used
More informationRatings 1 A at 125 VAC 1 A at 30 VDC LED indicator Without indicator With indicator Without indicator With indicator Actuator
Miniature Limit Switch CSM DS_E_3_3 Many Models Including Roller Lever Switches are Only -mm Thick with Connector New center roller lever models that enable ganged mounting of up to 6 Switches. Cable connectors
More informationSAFETY INTERLOCK SWITCH CONSTRUCTED WITH DUAL RESTORATION SPRINGS FEATURES
SAFETY INTERLOCK SWITCH CONSTRUCTED WITH DUAL RESTORATION SPRINGS FEATURES mm inch or more is assured as insulation distance between contacts (Snap-in mounting and 3 Form A type) Durability of 100,000
More informationD2SW. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
ealed ubminiature Basic witch ealed ubminiature Basic witch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationTurquoise Stroke Switches
Long Stroke and Sliding Contact Construction Sealed Switches Turquoise Stroke Switches 13.3 10.1 (Unit: mm) RoHS compliant FEATURES For pin plunger, it maintains a long stroke OT (Over Travel) with over
More informationPre-wired Models D4C- (1) (2) (3) (4)
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 03 Ph: +91 44 4353 Fax: 044 4353 E-mail: info@intechchennai.com Website: www.intechchennai.com Enclosed Switch D4C CSM_D4C_DS_E_10_1
More informationRobust General-Purpose Limit Switch WL
Robust General-Purpose Limit Switch WL Wide Selection of Two-Circuit Double-Break Limit Switches Rugged diecast housing High mechanical strength Oiltight, waterproof, dustproof construction Overtravel
More informationList of Models Short post on Long post on left left. Without posts Actuator Terminals Contact form
Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action The case dimensions are 78% of conventional models, contributing to down-sizing of mechanical modules.
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
More informationTKR CORPORATION
.Compact size Size is [6 7.8.mm] contribute to spacesaving The above size is not include the actuator and head..dustproof and splashproof Meets the IP6 degree of protection with high Sealing.. Contribute
More informationD2SW. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
ealed ubminiature Basic witch ealed ubminiature Basic witch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject
More informationTURQUOISE SWITCHES V TYPE (ABV)
HIGH ENVIRONMENTAL RESISTANCE ABV1 TURQUOISE SWITCHES V TYPE (ABV) FEATURES Miniature size (33 15.9.3 mm) (99.626.406 inch) Sealed construction for use in adverse environment Sealed construction by epoxy
More informationCT-2 CONNECTOR TERMINAL
Connector terminal for PLCs, PCs and various controllers CT-2 CONNECTOR TERMINL FETURES 1. One-touch wiring with the various controller types greatly reduces the time required for wiring operations. 2.
More informationLimit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
More informationSliding contact construction Switches for Low-level Loads
Sliding contact construction Switches for Low-level Loads AEQ (EQ) Switches 13.3 10.1 (Unit: mm) RoHS compliant FEATURES Handles low level load: 100 μa at 3 VDC to 100 ma 30 VDC Long stroke: For pin plunger
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
More information1LS-J700 SERIES ULTRA LONG LIFE, GENERAL-PURPOSE COMPACT LIMIT SWITCHES
1LS-J700 SERIES ULTRA LONG LIFE, GENERAL-PURPOSE COMPACT LIMIT SWITCHES With on-site mechanical life 3 times that of conventional models, improved reliability drastically reduces minor line interruptions.
More informationD4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications
Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive
More informationABJ (BJ) Turquoise Switches
Ultra-miniature Size Sealed Switches ABJ (BJ) Turquoise Switches Terminal type Mounting hole 2.3 mm type FEATURES Ultra-miniature size, High sealing performance sealed switches Elastomer double molding
More informationEnvironment-Sealed Basic Switches
HoneywellSensing and Control 1-800-537-6945 USA 1-815-235-6847International 1-416-293-8111Canada 13 Environment-Sealed Basic Switches GENERAL INFORMATION SE and XE switches are the smallest environment-sealed
More informationHS6B Series Subminiature Interlock Switch
HS6B Series Subminiature Interlock Switch HS6B features: Only 78 x 30 x 15mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1, EN954-1) Two actuator
More informationHS6B Series Sub-Miniature Interlock Switch. Direct Opening
HS6 Series HS6 Series Sub-Miniature Interlock Switch HS6 Key features include: Only 30mm x 15mm x 78mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1,
More informationMiniature Limit Switches
(Horizontal) Plastic od 49.17.1* oller Lever 49.1.01.03 Miniature Limit witches 49 ealed oller Plunger 49 eries Miniature Limit witches Model election...1 Model Number tructure... Technical Data...3 pecification...4
More informationG6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information
with the World s Smallest Mounting Area Subminiature model as small as.2 (H). (W) (L) mm is ideal for high-density mounting ((U)-2F(-Y)). Low profile of.2 mm improves mounting efficiency ((U)-2F(-Y)).
More informationModel Number Structure
Long-life Two-circuit Limit Switch WLM@ New Long-life Limit Switches Added to the Wide Variety of WL Models Improved resistance to abrasion and smoother movement in the head section means that a mechanical
More informationHEAVY DUTY POWER RELAYS FEATURES
VDE VC HEAVY DUTY POWER RELAYS VC RELAYS Faston terminal Screw terminal mm 9 FEATURES VC power relays are designed for controlling heavy duty loads safely: Contact gap of 3 mm or more -point contacts for
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Safety Interlock Switches D4JL D4JL For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. uard Lock Safety-Door Switch Holding
More informationHS1C Series Full Size Interlock Switch with Locking Solenoid. GS-ET-15 BG standard in Germany. HS1C Series Functionality
Full Size Interlock Switch with Locking Solenoid HSC Key features include: Rugged Aluminum Die-cast Housing With the actuator mounted on a movable door, and the switch on a machine, the door can be mechanically
More informationManual Reset Limit Switch
Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double
More information1 Form A 5A small size power relay for interface
1 Form A 5A small size power relay for interface PQ RELAYS RoHS compliant Protective construction: Sealed type FEATURES 1. Compact and slim 20 mm (L) mm (W) 16 mm (H).787 inch (L).394 inch (W).630 inch
More informationDC2-Wire Regular Cylindrical Proximity Switches
DC-Wire Regular Cylindrical Proximity Switches FL7M Series Rigid structure, highly waterproof DC -wire switches with improved visibility of lamps. DC -wire, for reduced wiring costs. Stable sensing area
More informationOMRON Z LIMIT SWITCH
Issued April 00 DATA SHEET OMRON LIMIT SWITCH Based on OMRON Datasheet General-purpose Basic Switch CSM DS_E Best-selling Basic Switch Boasting High Precision and Wide Variety A large switching capacity
More information(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet
Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_4_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch D2VW Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to
More informationthe Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationInteractive Catalog Replaces Catalog Pages
Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes
More informationD4D-N. Safety Limit Switch. Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking. H Contacts opened by positive opening
Safety Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking H Contacts opened by positive opening mechanism (NC contacts only) H Double insulation makes ground terminal
More informationHS1L Interlock Switches with Solenoid
HS1L Interlock Switches with Solenoid 3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuator as HS1E (actuator retention force 3000N) Six contacts in a compact housing
More informationHS1B Series Full Size Interlock Switch. GS-ET-15 BG standard in Germany. Part Number Key
HSB Series Full Size Interlock Switch HSB features: Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationNon-Contact Sensor for Workpiece Placement Verification
ir Catch Sensor Series 2 Non-Contact Sensor for Workpiece Placement Verification Stable detection of. to. mm clearance Due to the pneumatic bridge circuit and semiconductor pressure sensor, the non-contact
More informationD2SW. Sealed Subminiature Basic Switch. Ordering Information Model Number Legend D2SW-
Sealed Subminiature Basic Switch Sealed Subminiature Basic Switch Conforming to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject
More informationMechanical Min. 20 million operations. Min. 2 million operations for the Model SL1-B. Min. 2 million operations for high oil. (All values assume overt
PHOTOELECTRIC & KEY COMPACT HORIZONTAL (RUGGED) Model SL1- C The C-spring material is a high-cobalt alloy, which enhances resistance to coolants. The shape of the diaphragm seal has been modified to prevent
More informationAUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-8 RELAY CV RELAYS (ACV) Micro ISO Form C type Micro 8 plug-in type Micro ISO Form A type Micro 8 PC board type Compliance with RoHS Directive FEATURES Low profile:.
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationLow-torque Basic Switch
Low-torque Basic Switch Highly Reliable Rotary-action Switch for Low Torque Operation (0.5 m N m {5.1 gf cm}) 0.5-A rated model employs crossbar gold-alloy contacts for excellent contact reliability in
More informationABS (BS) Turquoise Switches
Subminiature Size Sealed Switches ABS (BS) Turquoise Switches 11.1 Terminal type 19.8 6.4 Wire leads FEATURES Subminiature size, High sealing performance sealed switches Elastomer double molding technology
More information