Datasheet ERHARD SWING check valve

Size: px
Start display at page:

Download "Datasheet ERHARD SWING check valve"

Transcription

1 Datasheet

2 Non-return valve with perfect self-centring The is a non-return valve that can be flexibly used for water and sewage. Featuring a 93 % opening value, it guarantees an extremely low zeta value, a head loss of less than 8 mbar in the fully opened position and a high degree of cost-effectiveness. Moreover, it is thereby scrapable in flow direction. The ball-shaped bearing pin ensures self-centring of the valve disc in the body seat which always guarantees sealed closure, even at low Interoir shaft back pressures. The shaft is supported in the cover, thereby medium free, permanently smoothly running and can easily be replaced. Apart from an internal shaft, the is also available with an external shaft including lever and weight. This design can be equipped with a basket guard to prevent accidents in the area of the lever. A conversation of internal to external shaft with lever and weight can also be done later without mounting the valve from the pipe. And in addition, the ERHARD SWING checkvalve is also available with lever and weight on both sides. Flange B DN 8, -, PN, EN 92-2 B DN -, PN 6, EN 92-2 The seat ring in the body is made of stainless steel, which, in conjunction with the inside and outside epoxy-coating of the body parts (with the thickness of 2 µm) it s an optimal protection against corrosion. Materials Body Internal parts Gaskets Screws Shaft bearing Lever Corrosion protection all-round EN-JS (GGG-) Stainless steel Elastomer, chambered Stainless steel A2 Brass Spheroidal graphite cast iron EN-JS EKB fusion bonded epoxy, blue External shaft, single-sided Areas of use Nominal size DN Pressure rating PN Hydrost. test pressure in bar DIN EN 2266 and DIN EN 74 for water Body Closure Max. allow. gauge working pressure in bar at working temperature + C 8, ,6 6 External shaft, double-sided When placing an order, please give precise details of the flow medium, concentration, gauge working pressure, working temperature and installation position. Suitable for use in conventional sewage up to a suspended matter of about 5 %. Required back pressure to absolute thigtness:,2 bar Operating instructions BA56E3_Swing_RK_ DN- 2

3 Offenstellung Open position Nominal size DN Pressure rating PN Flangeø D Height H Height H Width e2 Width e Length L Weight internal in kg Weight exterior in kg Bypass weight DN/kg / /, /, /, /,5 / /,7 2 / /,7 / /2, 3

4 Zeta-values DN PN 6, Zeta-value at 6 m / s:,27 % degree of opening corresponds to an angle of 56,7 DN 65 PN 6, Zeta-value at 6 m / s:,57 % degree of opening corresponds to an angle of 57,8, , DN 8 PN 6, Zeta-value at 6 m / s:,26 % degree of opening corresponds to an angle of 55, DN PN 6, Zeta-value at 6 m / s:,32 % degree of opening corresponds to an angle of 55,5, , DN 25 PN 6, Zeta-value at 6 m / s:,6 % degree of opening corresponds to an angle of 57, DN PN 6 % degree of opening corresponds to an angle of 6,, ,,

5 Zeta-values DN PN 6, Zeta-value at 6 m / s:,4 % degree of opening corresponds to an angle of 6, DN 2 PN 6, Zeta-value at 6 m / s:, % degree of opening corresponds to an angle of 66,,, , DN PN 6, Zeta-value at 6 m / s:, % degree of opening corresponds to an angle of 66,, Zeta Loss of pressure Dp Degree of opening Diagrams valid for cavitation free operation. 5

6 TALIS is the undisputed Number One for water transport and water flow control. TALIS has the best solutions available in the fields of water and energy management as well as for industrial and counal applications. We have numerous products for comprehensive solutions for the whole water cycle from hydrants, butterfly valves and knife gate valves through to needle valves. Our experience, innovative technology, global expertise and individual consultation processes form the basis for developing long-term solutions for the efficient treatment of the vitally important resource water. ERHARD GmbH & Co. KG Postfach 28 D-892 Heidenheim Meeboldstrasse 22 D Heidenheim Phone Fax Internet Note: Specifications may be changed without notification at any time. Copyright: No copying without express written permission of ERHARD ERHARD is a Registered Trademark EN (4/5)

Data sheet ERHARD non slam nozzle check valve

Data sheet ERHARD non slam nozzle check valve Data sheet ERHARD non slam nozzle check valve 2 ERHARD non slam nozzle check valve ERHARD non slam nozzle check valve The innovative non-return valve for maximum economy An optimised flow cross-sectional

More information

ERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve

ERHARD is a company of. Datasheet ERHARD ERK tilting-disc check valve ERHARD is a company of Datasheet ERHARD ERK tilting-disc check valve The universal check valve with double excentric valve disc A key component of the is the valve disc which has a freely oscillating,

More information

ERHARD is a company of. Datasheet ERHARD ball valve

ERHARD is a company of. Datasheet ERHARD ball valve ERHARD is a company of Datasheet The economical solution for high pressures and high flow rates Especially with high flow velocities up to 5 m/s and pressure ratings up to PN 4, the offers the ideal and

More information

Datasheet ERHARD ECLI butterfly valve

Datasheet ERHARD ECLI butterfly valve Datasheet ERHARD ECLI butterfly valve Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed

More information

ERHARD is a company of. Datasheet ERHARD ABS Premium service valve

ERHARD is a company of. Datasheet ERHARD ABS Premium service valve ERHARD is a company of Datasheet ERHARD ABS Premium service valve ERHARD ABS Premium service valve The innovative tapping systems With the new it has been possible to reduce the number of required models

More information

ERHARD is a company of. Data sheet ERHARD needle valves

ERHARD is a company of. Data sheet ERHARD needle valves ERHARD is a company of Data sheet ERHARD needle valves ERHARD RKV needle valves The innovative needle valve with the four positive points Based on decades of experience in the design and production of

More information

ERHARD is a company of. ERHARD ECLI butterfly valve

ERHARD is a company of. ERHARD ECLI butterfly valve ERHARD is a company of ERHARD ECLI butterfly valve The cost-effective solution for simple shut-off tasks Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial

More information

Our products for water transmission Double-eccentric butterfly valves Air valves Non-return valves Connection systems

Our products for water transmission Double-eccentric butterfly valves Air valves Non-return valves Connection systems Water transmission Lengths of over 100 kilometres and nominal widths of over DN 100 are not unusual for large scale water transmission systems. Often they are installed as parallel pipelines. They ensure

More information

UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings

UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in

More information

ERHARD is a company of. Dynamically into a new dimension the new Butterfly valve ERHARD ROCO wave

ERHARD is a company of. Dynamically into a new dimension the new Butterfly valve ERHARD ROCO wave ERHARD is a company of Dynamically into a new dimension the new Butterfly valve ERHARD ROCO wave A new chapter of the success story Johannes Erhard, who founded our company more than 140 years ago, would

More information

UNIJOINT is a company of. UNIJOINT Dismantling Joints

UNIJOINT is a company of. UNIJOINT Dismantling Joints UNIJOINT is a company of UNIJOINT Dismantling Joints Essential for straightforward and secure installation Source: ABB Dismantling joints play a decisive role in the design and layout of pipelines and

More information

Talbot Pushfit Service Fittings

Talbot Pushfit Service Fittings Talbot Pushfit Service Fittings Talbot Pushfit Talbot Pushfit fittings are quick and easy to use, with no nuts to loose or leave undone. Simply push the pipe into the fitting, The grip and seal on the

More information

Tilting-disc Check Valves Short Body

Tilting-disc Check Valves Short Body Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40

More information

Industrial water applications

Industrial water applications Industrial water applications There is hardly an industrial production process that can manage without water, for which reason a reliable and cost-effective supply of drinking, industrial and cooling water

More information

BV BAKIO Soft Sealing Gate Valve

BV BAKIO Soft Sealing Gate Valve TALIS in the process of innovation and continuous improvement has designed a new soft sealing gate valve named BAKIO. The process has been based on the development of the features that our customers perceive

More information

Welcome to the world of TALIS

Welcome to the world of TALIS Valve Catalogue Welcome to the world of TALIS Contents Our job is to protect water, the element that is vital for life. Together with our customers and partners, we are living up to this responsibility

More information

Welcome to the world of TALIS

Welcome to the world of TALIS Valve Catalogue Welcome to the world of TALIS Our job is to protect water, the element that is vital for life. Together with our customers and partners, we are living up to this responsibility all over

More information

ERHARD is a company of. ERHARD ERU K1 knife gate valve

ERHARD is a company of. ERHARD ERU K1 knife gate valve ERHARD is a company of ERHARD ERU K1 knife gate valve DN 50 600 PN 4 10 ERHARD ERU K1 tried and tested hundreds of thousands of times. Versatile: ERHARD ERU K1 is available in numerous designs. KKnife

More information

Reliable Precision ERU Knife Gate Valve K1

Reliable Precision ERU Knife Gate Valve K1 Reliable Precision ERU Knife Gate Valve K1 ERHARD ERU Knife Gate Valve K1: Robust, resilient-seated knife gate valves made from cast iron for isolation and control functions. Numerous design options available.

More information

Pneumatic Butterfly Valve Type 3335 / AT

Pneumatic Butterfly Valve Type 3335 / AT Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN

More information

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN

More information

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS

More information

Butterfly valves. Introduction. Made of ductile cast iron

Butterfly valves. Introduction. Made of ductile cast iron Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international

More information

Swing Check Valves - Series 41

Swing Check Valves - Series 41 Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.

More information

BELGICAST is a company of. Butterfly Valves

BELGICAST is a company of. Butterfly Valves BELGICAST is a company of Butterfly Valves TALIS the number one choice for all valve-related products. TALIS is the major brand whenever products and services are needed for the water cycle. The brands

More information

RELIABLE DURABLE SAFE Industrietechnik GmbH PERMADOR PARADOR K2000R HIGH-PRESSURE- GATE VALVES SWING CHECK VALVES PARADOR PERMADOR K2000R

RELIABLE DURABLE SAFE Industrietechnik GmbH PERMADOR PARADOR K2000R HIGH-PRESSURE- GATE VALVES SWING CHECK VALVES PARADOR PERMADOR K2000R RELIABLE DURABLE SAFE Industrietechnik GmbH PERMADOR PARADOR K2000R HIGH-PRESSURE- GATE VALVES SWING CHECK VALVES PARADOR PERMADOR K2000R INTRODUCTION TO THE COMPANY DRW INDUSTRIETECHNIK DRW INDUSTRIETECHNIK

More information

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901 ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2

More information

Operating Instructions

Operating Instructions Operating Instructions ERHARD Tilting-Disc Check Valves with weight-loaded lever 1 Safety Aspects 2 Description of Product and Range of Application 3 Design Features Technical Data 4 Performance and Mode

More information

Saddle valves KH210GR - KH230GR

Saddle valves KH210GR - KH230GR Saddle valves KH210GR - KH230GR Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Production and distribution of tapping valves: Tapping valves according to DIN 3543 with

More information

BELGICAST is a company of. Butterfly Valves

BELGICAST is a company of. Butterfly Valves BELGICAST is a company of Butterfly Valves TALIS the number one choice for all valve-related products. TALIS is the major brand whenever products and services are needed for the water cycle. The brands

More information

BUTTERFLY VALVE - WAFER FAF 3500

BUTTERFLY VALVE - WAFER FAF 3500 PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic

More information

Butterfly valve Series K

Butterfly valve Series K P R O C E S S T E C H N I K G M B H Centrally mounted butterfly valve PTFE lined Type KG 6 KG 8 K 16 K 18 two-piece body GEFA-MULTITOP Automation system Exchangeable flange for direct installation Unsurpassed

More information

BOAX-B Mat E. Type Series Booklet

BOAX-B Mat E. Type Series Booklet Butterfly Valve with Electric Actuator BOAX-B Mat E PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 and 300 Design to EN 593 and ISO 10631 Type Series Booklet Legal information/copyright Type Series Booklet

More information

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400

More information

Cast iron Nodular iron Cast steel BR 050 Page 2. Stainless steel BR 059 Page 2. Cast steel BR 080 Page 3

Cast iron Nodular iron Cast steel BR 050 Page 2. Stainless steel BR 059 Page 2. Cast steel BR 080 Page 3 Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges TRB 801 No. 45 (except GG-25) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern with flanges TRB 801 No. 45 Stainless steel

More information

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle. Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing

More information

Hattersley Newman Hender Ltd

Hattersley Newman Hender Ltd Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper

More information

Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C)

Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 Fig. 070 ARI-EURO-WEDI - Hood valve Fig.

More information

Water Supply and Sewerage Approved Products Manual - February 2006

Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply and Sewerage Approved Products Manual - February 2006 Pressure Sewerage Products Valves Section SPO 01 Last updated Jan 2007 CONTENTS SPO 1-S1 GAS RELEASE VALVE A SPO 1-S2 COMBINATION GAS

More information

AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901

AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901 AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2

More information

Operating manual Keula gate valves DN PN10/16

Operating manual Keula gate valves DN PN10/16 Operating manual Keula gate valves DN40-400 PN10/16 Page - 1 Manufacturer: Keulahütte GmbH Geschwister-Scholl-Str. 15 02957 Krauschwitz GERMANY Manufacture and sale of the slide valves: Slide valves according

More information

AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING

AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising

More information

ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA - Luft TÜV-Test-No. 922-9204866 Grey cast iron

More information

Materials : Cast iron body EN GJL-250

Materials : Cast iron body EN GJL-250 Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless

More information

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION

More information

CLASS 400 FORGED BRASS BALL VALVE

CLASS 400 FORGED BRASS BALL VALVE CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information

Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244

Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve

More information

Hydrocontrol VFC cast iron, PN 16 Hydrocontrol VFR bronze, PN 16 Hydrocontrol VFN nodular cast iron, PN 25 Double regulating and commissioning valves

Hydrocontrol VFC cast iron, PN 16 Hydrocontrol VFR bronze, PN 16 Hydrocontrol VFN nodular cast iron, PN 25 Double regulating and commissioning valves Hydrocontrol VFC cast iron, PN 16 Hydrocontrol VFR bronze, PN 16 Technical Information Application: Oventrop double regulating and commissioning valves Hydrocontrol VFC/VFR/VFN are installed in the pipework

More information

Oil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148

Oil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148 PRODUCT CATALOGUE 2 History 4 Products Gate valves Flat 13 Oval 25 Round 41 Knife 53 Butterfly valves Double eccentric 63 Triple eccentric 81 Turbine inlet valves 85 Non-return valve Swing check valves

More information

General information Gate valves

General information Gate valves General information Gate valves In 1957, Hawle invented the resilient-seated gate valve with multiple O-ring sealing of the valve spindle and had it patented. Today, this type of gate valve is the standard

More information

ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges ARI-Strainer ARI-Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) EN ISO 15848-1 / TA - Luft TÜV-Test-No.

More information

VAG Butterfly Valves

VAG Butterfly Valves VAG Butterfly Valves VAG EKN Butterfly Valve H-Series New for the highest requirements Runners Pressure compensation channels O-ring seal Hydrodynamic disk Automatic sealing system Retaining ring Tapered-pin

More information

Manual valves. automatic meters and valves

Manual valves. automatic meters and valves Manual valves automatic meters and valves Butterfly valves manual valves Advanced technical design 1. Robust and lightweight leverage system. Ergonomic design. Protection of gear mechanism.. Flange fitting

More information

The HYDROMAT. Technical Information Since The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg

The HYDROMAT. Technical Information Since The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg The HYDROMAT Technical Information Since 1953 The HYDROMATEN KG is a company of the Tröger + Entenmann corporate group, Heidelberg Product overview + Supply capability Nominal diameters Nominal pressure

More information

Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends

Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges German "TA-Luft" TÜV-Test-No. 922-9204866 TRB 801 No. 45 (except cast iron) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern

More information

ERHARD is a company of. ERHARD butterfly valves

ERHARD is a company of. ERHARD butterfly valves ERHARD is a company of ERHARD butterfly valves Butterfly valves for the requirements of tomorrow The purpose of butterfly valves is to reliably start and stop the flow of media safely and at any time.

More information

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper

More information

Double regulating and commissionig valves Hydrocontrol F cast iron, PN 16 Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25

Double regulating and commissionig valves Hydrocontrol F cast iron, PN 16 Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25 Hydrocontrol FR bronze, PN 16 Hydrocontrol FS nodular cast iron, PN 25 The Oventrop Quality Management System is certified to DIN-EN-ISO 9001 Technical Information Application: Oventrop double regulating

More information

Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...

Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve... Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...

More information

CONDA-VRC Type Series Booklet

CONDA-VRC Type Series Booklet Pressure Reducing Valve PN 16/25/40/63 DN 15-150 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,

More information

ERHARD is a company of. Data sheet ERHARD ROCO wave

ERHARD is a company of. Data sheet ERHARD ROCO wave ERHARD is a company of Data sheet Content Product range (DN / PN) Fields of applications Area of use Materials Coating systems Concept of sealing Shaft bearing Gear Drive variants Approvals Weight Zeta

More information

ATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors

ATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any

More information

Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...

Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves... Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265

More information

DAMS, RESERVOIRS & HYDROPOWER SOLUTIONS

DAMS, RESERVOIRS & HYDROPOWER SOLUTIONS DAMS, RESERVOIRS & HYDROPOWER SOLUTIONS Orbinox Glenfield Premier DAMS, RESERVOIRS & HYDROPOWER CONTENT: TECHNICAL CAPABILITIES 4-5 APPLICATION MATRIX 6-7 BOTTOM OUTLETS 8 INTERMEDIATE OUTLETS 9 SPILLWAYS

More information

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate

More information

VAG Non-Return Valves

VAG Non-Return Valves VAG Non-Return Valves VAG SKR Slanted Seat Tilting disk Check Valve Shaft Bearing bush Disk Seat Nominal pressures PN 10, 16 Nominal diameters DN 200 1400 Fields of application: drinking water, preclarified

More information

Butterfly valves PN 16

Butterfly valves PN 16 s 4 119 ACVATIX TM Butterfly valves PN 16 VKF42.. Gray cast iron or nodular cast iron valve body DN 50...600 k vs 65...37,000 m 3 /h For fitting with PN 16 counter-flanges to ISO 7005 Tight-closing in

More information

Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units

Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate

More information

Two port valves. pneumatically actuated

Two port valves. pneumatically actuated Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use

More information

Technical Manual. Register 25 CONTENTS - AKH2-TAT

Technical Manual. Register 25 CONTENTS - AKH2-TAT D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data

More information

RESILIENT SEATED GATE VALVE FAF 6200

RESILIENT SEATED GATE VALVE FAF 6200 PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection

More information

D-023 PN 16 / 25. Combination Air Valve for Wastewater PATENTED. Description. Applications. Operation. Main Features

D-023 PN 16 / 25. Combination Air Valve for Wastewater PATENTED. Description. Applications. Operation. Main Features PN 16 / 25 Wastewater Combination Air Valve for Wastewater PATENTED EuroC-D023SWG-15-2 Description The D-023 Combination Air Valve combines an air & vacuum component and an air release component in a single

More information

Operating Instructions Garlock Butterfly Valves DN : mm / 2-24

Operating Instructions Garlock Butterfly Valves DN : mm / 2-24 Operating Instructions Garlock Butterfly Valves DN : 50-600 mm / 2-24 PN : 10 / 16 Type: GAR-SEAL SAFETY-SEAL STERILE-SEAL MOBILE-SEAL Conformity declaration... 14 0 Introduction... 15 1 Proper use...

More information

Nero Needle Valves. Nero Needle Valves

Nero Needle Valves. Nero Needle Valves Nero Needle Valves Main Characteristic The needle valve is mainly designed for water flow rate and pressure regulation in a pipeline. The regulation takes place thank the axial movement of the piston,

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main

More information

Backflushing Filter AutoFilt RF3

Backflushing Filter AutoFilt RF3 Backflushing Filter AutoFilt C 2,5 4 6 8 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL The automatic back-flushing filter AutoFilt is a self-cleaning system for extracting particles from lowviscosity fluids.

More information

BR 10a Control and Shut-off Butterfly valve

BR 10a Control and Shut-off Butterfly valve M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with

More information

Technische Dokumentation Technical Documentation

Technische Dokumentation Technical Documentation Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table

More information

Inline Filters for Process Technology

Inline Filters for Process Technology Inline Filters for Process Technology Inline Filters for Every Process. HYDAC inline filters feature high filtration capacity and easy handling and therefore contribute to safe and economical system operation.

More information

AVK UK GROSS PRICE LIST 2017

AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK PRICE LIST 2017 AVK UK is part of the globally renowned AVK Group, one of the leading manufacturers of valves for the water, gas and waste

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories.

Mustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories. PRESSURE REDUCING CONTROL VALVE 02/09 Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L Standard Components 1 Main Valve

More information

Concentric butterfly valves

Concentric butterfly valves Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16

More information

Bonded Liner Butterfly Valve Double Flanged Type Series 150

Bonded Liner Butterfly Valve Double Flanged Type Series 150 Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV

More information

ISO-DE Double Eccentric Butterfly Valves

ISO-DE Double Eccentric Butterfly Valves ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com

More information

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1 SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators

More information

Butterfly valves for high temperature series GD(H) - LDK

Butterfly valves for high temperature series GD(H) - LDK Butterfly valves for high temperature series GD(H) - LDK Butterfly valves of series GD(H) and LDK are suitable for industrial plants to regulate hot air and exhaust combustion gas, not containing cast

More information

Butterfly valves PN 16

Butterfly valves PN 16 s 4 119 ACVATIX TM Butterfly valves PN 16 VKF42.. Gray cast iron or nodular cast iron valve body DN 50...600 k vs 65...37,000 m 3 /h For fitting with PN 16 counter-flanges to ISO 7005 Tight-closing in

More information

CONDA-VLC Type Series Booklet

CONDA-VLC Type Series Booklet Level Control Valve PN 16 DN 25-300 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

2 PIECES BALL VALVE PN63

2 PIECES BALL VALVE PN63 2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200

More information

FT47 SG Iron Ball Float Steam Traps (DN15 to DN50)

FT47 SG Iron Ball Float Steam Traps (DN15 to DN50) Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN

Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460

More information

ARI-Strainer PN63-160

ARI-Strainer PN63-160 ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +

More information

Cast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4

Cast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4 Check valve Straight through with flanges (except GG-25) Cast iron Nodular iron Cast steel BR 003/303 Page 2 Straight through with flanges Forged steel BR 003 Page 2 BR 003 Straight through with flanges

More information

PRESSURE REDUCING VALVE

PRESSURE REDUCING VALVE Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve

More information

PRESSURE REDUCING VALVE

PRESSURE REDUCING VALVE Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve

More information

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through

More information

D-26. Combination Air Valve for Wastewater. Description. Applications. Operation. Main Features

D-26. Combination Air Valve for Wastewater. Description. Applications. Operation. Main Features D26.SWG.CAT.ENG0 D-26 Wastewater Combination Air Valve for Wastewater Description The D-26 Combination Air Valve combines an air & vacuum component and an air release component in a single body. The valve

More information

PRESSURE REDUCING VALVE

PRESSURE REDUCING VALVE Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE

More information

HYDRAULIC CONTROL VALVES

HYDRAULIC CONTROL VALVES HYDRAULIC CONTROL VALVES INC. VALVES, INC HYDRAULIC CONTROL VALVES WORKING PRINCIPALS It is automatic hydraulic control valve designed for make desired modulation processes in main valve network line as

More information