GARAGE DOOR OPERATOR USER S MANUAL

Size: px
Start display at page:

Download "GARAGE DOOR OPERATOR USER S MANUAL"

Transcription

1 GARAGE DOOR OPERATOR USER S MANUAL - DOMESTIC USE CIL-CD800S Chain) CIL-BD800S Belt

2 GARAGE DOOR OPENER OWNER S MANUAL - DOMESTIC USE CIL-CD800S CD800S(Chain Chain) CIL-BD800S BD800S(Belt Belt) 1

3 Features Manual locking of the door when a power failure occurs: If power failure occurs while the door is opening, the door can be released by pulling the clutch down, then manually moving the door to the closed position, then the door can be locked. The system can be automatically re-engaged again once the power is back on again simply by pressing the open/close button on the remote. The chain will travel until the spool on the chain engages. After this, normal operation is resumed. Rolling code: integrated circuit with specialized rolling code with over a billion random codes. Up to 20 transmitters can be coded to the auto opener. Travel and limits memory: the limit and travel settings are stored on a microprocessor chipset, even after the power is removed, the information will be retained on the chipset. Soft start & soft stop which lessens the impact on the door during operation, and prolongs the life of both the door and opener. This also provides extremely quiet operation as there is no sudden stopping or starting of the door. Resistance/sensitivity protection: the opener will check and set the force protection which ensures the opener has optimum operational sensitivity. The circuitry automatically adjusts the sensitivity control of the door during standard operation allowing manual adjustment to be unnecessary. Photo cell beam sensors can be connected to the opener to ensure further protection. Auto closing: A function that allows the opener to be set to auto-close after a user-set time from 1 to 9 minutes. This function requires the use of Photo Cell Beam Sensors. Burglar Alarm: the opener can be connected to a special alarm monitor. This alarm will siren will activate should the door be forcibly opened outside normal operation. Fault checking: using the on-board diagnostics LED s, a set of codes will determine possible faults or errors. Easy operation: All opener settings are indicated on the LED display in simple codes. 2

4 Contents 1. Required tool list Important safety instructions Opener installation Important installation instruction Installation sketch map Sectional rail assembly Opener assembly Installing opener Installation of door opening limit piece Automated instructions & programming Ready status Operational instructions Adjustment methods Operational Diagnostics Locking door manually Accessories Installation Photo beam installation Push button installation Alarm installation Back-up battery installation Maintenance and repair Technical data Trouble shooting 09, 10 3

5 1. Required tool list This automatic door opener is designed to be installed by trained professionals. If this is to be installed as a DIY install, you will require all, but not limited to, the following; Electric Drill or Battery Drill Timber Tec Driver Bit Socket Set Philips and Flat Screw Drivers Silicon Spray Builders Pencil 2. Important safety instructions WARNING INCORRECT INSTALLATION CAN LEAD TO SEVER INJURY FOLLOW ALL INSTALLATION INSTRUCTIONS IN THIS MANUAL AND ALWAYS DO THE FOLLOWING: 1) Your garage doors need to be kept properly balanced and in a mechanically sound condition. Have a professional service person make repairs to cables, spring assemblies and other hardware, and to ensure that the door is serviced on a regular basis. 2) Do not let children play near a garage door when it is opening or closing. Never operate the door without being able to see it through the entire operation 3) Never put fingers between the sections of a garage door, even if you own a Conqueror Pinch Free Sectional Door, best practice is always to keep your fingers away from moving parts. Keep hands and fingers clear of section joints, hinges, tracks, springs and other door parts. 4) Do not let children play with transmitters or remote controls, and place these items out of reach of children. 5) Test the door operator automatically reverses on hitting an obstruction monthly. The garage door MUST reverse on contact with a 40mm high object (or a 50mm by 100mm board laid flat) on the floor. If the garage door does not reverse, adjust either the force or the limit of travel, and re-test the automatic reversing function. 6) Disconnect the electrical power to the operator before attempting any repairs. Only authorized repair and service agents are permitted to remove the outer cover of the auto opener. Only simple repairs to the opener or door should ever be carried out. If in doubt, call a Conqueror service agent immediately. 7) If possible, use the emergency release only when the door is closed, as should the door have lost spring tension or the cable had come off, this may result in the door falling rapidly which can cause serious injury or death. 8) Do not use the emergency release rope to open or close the door! 9) Keep this manual in a safe place along with a copy of the invoice. 1

6 3. Opener Installation 3.1. Important installation instructions In order to reduce the risk of serious injuries or death, please read and follow all instructions provided! 1) Install only on a properly balanced door. An improperly balanced door has the potential to inflict severe injury. Have a qualified service person make repairs to cables, spring assemblies, and other hardware before installing the opener! 2) Remove all ropes and remove or make inoperative all locks connected to the garage door before installing opener! 3) Where possible, install the operator at least 2.1 meters or more above the floor. For products having an emergency release, mount the emergency release at least 1.8 meters above the floor! 4) Locate the control button: Within sight of door At a minimum height of 1.5 meters so children are not able to reach it, and Away from all moving parts of the door 5) This operator is to be used only with residential sectional or one-piece doors! 6) To avoid damage to the garage door and operator, disable any door locking mechanisms before installing and operating the operator. 7) Prior to installation ensure that all fixing points where screws and bolts will penetrate through walls or ceilings that no electrical, gas or water lines are in the way or may come into contact with. 8) The garage ceiling must have installed appropriate timber fixing points. The installer must ensure that the operator is firmly attached and is not screwed into only gypsum or plaster ceilings which are not alone structurally appropriate for fixing to. 9) The enclosed emergency release rope must be installed at a convenient height, and not at a level that will interfere with vehicles moving in and out of the garage! Check the emergency release operation after installation to ensure ease of operation. 10) Do not use the emergency release rope to open or close the door! 11) After installing the opener, check that the door automatically reverses when it comes into contact with a 40mm high object on the floor during the closing sequence! 12) All electrical terminations involving mains voltage (240VAC) must be performed by a qualified electrician. This includes the installation of the 3 pin socket. The automatic operator comes supplied with a fixed 1 meter long power cord with a standard 3 pin plug attached, so can be plugged directly into a standard 10 Amp power socket or extension cord if required. 13) Any low voltage ancillary device connections can be performed by the homeowner or qualified installer. These include safety beams, alarm control systems, wired wall control switches etc. For garages without a second access door or internal access, an additional emergency release is necessary, which prevents a possible lock out! 2

7 3.2 Installation sketch map As figure 1 shows the completed installation: Figure 1 1 Mount plate bending in the middle(if doorway higher than 2.7m) 3.3 Sectional rail assembly (Note: Not required in One Piece Rail Kits go to 3.4, Head to Rail Assembly) Rail connection Place the sectional rails (as shown in Figure 2) on a clean and flat surface (as shown in Figure 3), and put them in line. Connect the sectional rails (as shown in Figure 4), finish it as shown in Figure 5. Figure 2 Figure 4 Figure Fix chain (belt) As shown in Figure 6, install Front support of rail, adjust chain or belt in modest tension state. Figure 5 3 Figure 6

8 3.4 Opener Head to Rail Assembly Opener connection Assemble opener as shown in Figure 7, fasten four anti-loose screw M8 16. Figure Slide Rail Assembly and Disengage Mechanism As shown in Figure 8, fasten the disengagement assembly to the C Rail trolley body with the cross-slot Small head Screw M6x20, ensuring the 4x screws are tight but not over tightened. Tie the rope to the disengagement leaver Lifting Plate Connection Connect lifting plate as shown in Figure 9, L is about 100mm, keep bolts loose, in order to adjust the L length. M8x20 Figure 8 M8 ~ Figure Fitting the opener Installing the front header bracket As shown in Figure 10, determine the installation location of the front header bracket and fix firmly in position Install perforated angle for opener head Cut a piece of perforated angle ( mm) and fix firmly to the ceiling keeping it centered of the door opening. Figure 10 4

9 3.5.3 Hoisting opener As per Fig12, connect the door end of the Rail to the front header bracket and secure. Lift the motor end the opener to the horizontal Position and fix to the perforated angle that is fitted to the ceiling using two shorter lengths of perforated angle. It is possible to screw directly through the rail within 200mm of the head and direct fix into timber through the rail assembly. We recommend at least two secure screws into a ceiling with sufficient timber fixings. 1 Pin Φ R spring pin Installation of garage door bracket 3 bracket 4 square neck boltsm6 12 Close the door manually making sure the door is fully 5 Nuts M6 closed and the emergency release lever is not engaged into the rail assembly locking holes. Fix the Opener Door Bracket as in Fig13 showing ( L2= mm ), then fix in place with steel-tec screws Note: If there is no correspondent support steel sheets in the door panel s center, the support board must be added to ensure the installation strength of door bracket mm Fig 14 1 Pin Φ R spring pin 3 Straight drawbar 4 Bent drawbar 5 Bolts M Hexagon head with spring flange nutsm8 Fig Installation of straight arm and hockey stick As Fig 14 showing, respectively connect straight Arm to the Traveller and the Hockey Stick to the door bracket; then pull down the rope on clutch to release it, move the clutch base to the position showing as Fig 14, then using bolts to lock straight drawbar and bent drawbar. Adjust the length of clutch rope to make the height from the clutch handle to the ground not less than 1.8 meter Fig Installation of door open limit stop Manually open the door to the required opening height; by using bolts M6x12, fix the limit stop bracket as per Fig 15. If the position is not pre-drilled, drill new holes and locate. 5

10 4. Automated instructions & programming Open the cover as Fig16 showing before adjusting. CIL-CD800S (Chain) and CIL-BD800S (Belt) Opener Quick Set Up Guide Button +, and P are used for the set up (Fig. Q1) Fig. Q1 Set the open/close limits NOTE: The door, traveler and chain/belt spool must be engaged. The opening stop must be installed + - P (Fig. 2) 1. Press & Hold button P until is displayed 2. Briefly press button + 3. The garage door will now automatically open and close for 2 cycles. Fig. Adjust Closing Clearance 1. Press & Hold button P until A is displayed 2. Scroll to using P button 3. Briefly press + or to adjust the closing clearance from 0 to 9 (default: 2) 4. Press P to confirm and enter the next setting Opening Sensitivity 1. Press & Hold button P until A is displayed 2. Scroll to using P button 3. Briefly press + or to adjust the opening sensitivity from 0 to 9 (default 3) 4. Press P to confirm and enter the next setting Closing Sensitivity 1. Press & Hold button P until A is displayed 2. Scroll to using P button 6

11 3. Briefly press + or to adjust the closing sensitivity from 0 to 9 (default 3) 4. Press P to confirm and enter the next setting Safety Beam Setting 1. Press & Hold button P until A is displayed 2. Scroll to using P button 3. Briefly press + or to set the safety beam from 0 to 2 (default 0) 0: No Safety beam, 1: Activate safety beam during door closing, 2: Activate safety beam during door closing and opening 4. Press P to confirm and enter the next setting Auto Closing Time 1. Press & Hold button P until A is displayed 2. Scroll to using P button 3. Briefly press + or to set the auto closing time from 0 to 9 minutes (default 0) 4. Press P to exit Transmitter Code Learning 1. Press & Hold button until is displayed 2. Press a transmitter button once,. slowly flashes 3. Press the same transmitter button once again,. quickly flashes for 2 seconds and off Transmitter Code Deleting 1. Press & Hold button until appears, keep hold button until. Disappears 2. Release the button, all the transmitter codes is deleted. Transmitter Button Function Setting 1. Press & Hold button P until is displayed 2. Briefly press + or to set the transmitter button function from 0 to 2 (default: 1) 0: Tx button A is for opening the door, Tx button B is for closing the door 1: One Tx button controls the door 7

12 2: Tx button A controls the door, Tx button B controls the light 3. Press P to confirm and enter the next setting Auto Closing with/without Safety Beam 1. Press & Hold button P until F is displayed 2. Scroll to using P button 3. Briefly press + or to set the auto closing from 0 to 1 (default 1) 0: Auto closing without safety beam, 1: Auto closing with safety beam 4. Press P to confirm and enter the next setting Reset To Factory Default 1. Press & Hold button P until F is displayed 2. Scroll to using P button 3. Briefly press + or to select from 0 to 2 (default 0) 0: No reset, 1: Reset to factory default setting and keep transmitter codes, 2: Reset to factory default setting and delete all the transmitter codes 4. Press P to confirm and exit 4.4 Fault information This opener could auto detect the error during running, and display the error information. When error occurs, digital tube could display the error code, the radix point will also flash quickly. After 5 seconds of flash of error information, it will automatically recover to display normally. Fig26 a) 1. : means the journey setting fault. b) 2. : means protection against obstacle during opening c) 3. : means protection against obstacle during closing. d) 4. : means opto-beam shielded/blocked or photocell is damaged. e) 5. : means transmitter error in learning or coding. f) 6. : means the running time exceeded 100 seconds. g) 7. :means speed sensor is damaged; h) 8. :means DC motor is damaged. 4 locking door manually As shown in Figure 25, if the door is open when power off, you can disconnect clutch, pull the door to the closed position manually, the door can be locked into the holes of the rail. Notice:Please do not use the manual pull release cord to 8 m m 0 5 1

13 open or close the door as damage may occur to the trolley or carriage 5 Accessory installation 6.1 photo beam installation The Photo beam is an infrared LED safety device. If a person or obstacle interrupts the infrared beam when door closing, the opener will automatically return to the open position Location of photo beam installation As Fig. 26:Fix the photo beam brackets into the left and right walls on the outside of the vertical tracks. Then, install the photo beam units onto the brackets with M6 30 screws. Notice:make sure the beams are placed at the same height and are level Wiring Remove the opener cover as per Fig. 27, and connect the two wires to either terminals on each of the photo beams and the other end of each two wires to the opener terminals marked with PHOTO. NB:Please set the photo beam setting to 1 or 2 in the set up menu on the auto to activate the beams. XT4 XT4 SW-WALL PHOTO AL- IN AL-SPK Fig. 27 Fig Wall button installation Wall switch must be installed on the place that can clearly see the operation of the door and must be 1.3m above the ground to prevent the children from mal-operation. Open opener cover as Fig. 28, then connect two wire connecting terminals. In the back of wall switch with the two terminals in the opener marked with SW-WALL. Then fix the wall switch XT4 to the wall with screws. 6.3 alarm installation Opener can connect with alarm. If the door is open manually when the opener is close, the alarm will keep beeping for 1 min. Pressing wall switch or transmitter can delete beeping. Connect wires according to Fig.29 and refer to the alarm manual about the detailed alarm installation and adjustment. Notice:Please ensure the alarm switch can be pressed when door is closed. 6.4 back-up battery installation Opener can connect with back-up battery (optional). The battery can be charged by opener power. When power failure, the opener will Turn to battery power supply automatically. The battery is DC24V maintenance- free lead acid storage Battery or two DC 12V batteries. Please refer to Fig Maintenance and repair Please inspect the automatic reversal and the door balance monthly, and adjust it if necessary. 8. Technical data a) Max. output power:250 W - BATTERY + XT6 SW-WALL PHOTO AL- IN AL-SPK SW-WALL PHOTO AL-IN AL-SPK Fig. 28 Fig. 29 Fig. 30 BLACK RED 9

14 b) Max. lifting force:800 N c) Opening and closing speed:160 mm/s d) light:12 V(high light LED) e) motor:dc 24 V f) Remote control distance: 30 m g) Remote frequency: MHz h) Transmitter amount:100 pcs i) Temperature:-25 ~ +55 j) Back-up battery:dc24v 4-7Ah maintenance- free lead acid storage battery 10

15 9.Trouble shooting Trouble Reason Solution The opener can t work, without display on LED The opener can t work, LED display 1. Door stops before it is fully up on opening cycle; LED display 2.or 3. Door auto-reverses before reaching the ground on closing; LED display 3. The door can t run to the closing door direction, LED display 4. Opener stops after a moment running, LED display 7 Opener cannot run and LED display 8 Push button can operate normally, but can t remote control The remote distance became very near distinctly, the brightness of indicator lamps became lower distinctly Remoter can operate normally, but the push button has no function Opener is not power on Fuse of main control board damaged Travel adjustment error The closing resistance is greater than that system set load activates the barrier protection system The closing resistance is greater than that system set load activates the barrier protection system The light of photo beam have been shielded; System started to use photo beam system, but it hasn t been connected. speed sensor wire is loosed speed sensor is broken DC motor wire is loosed DC motor is broken control board is broken The transmitter has not learned It has no battery in the transmitter The battery power is not enough Push button loose or broken circuit Switch on the power, inspect POWER socket Change the same type fuse. Readjust limit position Inspect and adjust the door balance system Inspect and adjust the door balance system increase door closing load Remove the barrier in the beam road. Prohibit using photo beam or connect the photo beam reconnect the wires change speed sensor reconnect the wires change DC motor change control board Learn transmitter according to the manual Change the battery of transmitter Change the battery Inspect push button wiring The product appearance and functions will be changed by development without further notice. 11

GARAGE DOOR OPENER OWNER S MANUAL S3/S4

GARAGE DOOR OPENER OWNER S MANUAL S3/S4 GARAGE DOOR OPENER OWNER S MANUAL S3/S4 Features! Locking door during power failure: If power failure occurs while the door is operating, the door can be released by pulling the clutch down, allowing

More information

AUTOMATIC CONTROL ROLLING DOOR OPENER

AUTOMATIC CONTROL ROLLING DOOR OPENER AUTOMATIC CONTROL ROLLING DOOR OPENER INSTALLATION INSTRUCTION AUTOMATIC OBSTRUCT PHOTOELECTRIC BEAM ROLLING CODE SYSTEM AUTO CLOSE DOOR ANTI-THEFT SYSTEM INSTALLATION INSTRUCTION AND RDO OWNERS MANUAL

More information

R3 Roller Garage Door Opener

R3 Roller Garage Door Opener R3 Roller Garage Door Opener INSTALLATION INSTRUCTIONS OWNERS COPY 1 WARNING: It is vital for the safety of persons to follow all instructions. Failure to comply with the installation instructions and

More information

Instruction Manual MB4 Rolling garage door opener

Instruction Manual MB4 Rolling garage door opener Instruction Manual MB4 Rolling garage door opener INSTALLATION INSTRUCTIONS OWNERS COPY 1 WARNING: It is vital for the safety of persons to follow all instructions. Failure to comply with the installation

More information

Sectional and Tilting Door Opener

Sectional and Tilting Door Opener Sectional and Tilting Door Opener Installation Instructions and User Guide 600 800 1000 S/N WARNING Please read the manual carefully before installation and use. The installation of your new door opener

More information

Sectional and Tilting Door Opener Installation Instructions and User Guide

Sectional and Tilting Door Opener Installation Instructions and User Guide Sectional and Tilting Door Opener Installation Instructions and User Guide ET-600E ET-800E ET-1000E S/N WARNING Please read the manual carefully before installation and use. The installation of your new

More information

Sectional and Tilting Door Opener Installation Instructions and User Guide

Sectional and Tilting Door Opener Installation Instructions and User Guide Sectional and Tilting Door Opener Installation Instructions and User Guide 600N / 800N / 1000N S/N WARNING Please read the manual carefully before installation and use. The installation of your new door

More information

SECTIONAL AND TILTING DOOR OPENER INSTALLATION INSTRUCTIONS AND USER GUIDE. Comfort 800E/1000E

SECTIONAL AND TILTING DOOR OPENER INSTALLATION INSTRUCTIONS AND USER GUIDE. Comfort 800E/1000E SECTIONAL AND TILTING DOOR OPENER INSTALLATION INSTRUCTIONS AND USER GUIDE Comfort 800E/1000E WARNING Please read the manual carefully before installation and use. The installation of your new door opener

More information

HATO 120 / 200 SECTIONAL DOOR OPERATOR USER S MANUAL HATO 120/200 SECTIONAL DOOR OPERATOR USER S MANUAL

HATO 120 / 200 SECTIONAL DOOR OPERATOR USER S MANUAL HATO 120/200 SECTIONAL DOOR OPERATOR USER S MANUAL HATO 120/200 SECTIONAL DOOR OPERATOR USER S 2 OUTLINE 1. Safety instructions...4 2. Description and features... 4 3. Technical specifications... 4 4. Check... 5 5. Installation and adjustment... 5 6. Programming...

More information

Rolling Door Opener INSTALLATION INSTRUCTION AND OWNERS MANUAL

Rolling Door Opener INSTALLATION INSTRUCTION AND OWNERS MANUAL Rolling Door Opener INSTALLATION INSTRUCTION AND OWNERS MANUAL IMPORTANT SAFETY INFORMATION FAILURE TO COMPLY WITH THE FOLLOWING SAFETY RECOMMENDATIONS MAY RESULT IN SERIOUS PERSONAL INJURY, DEATH AND

More information

Instruction Manual LA-SDO1 Sectional garage door opener

Instruction Manual LA-SDO1 Sectional garage door opener Instruction Manual LA-SDO1 Sectional garage door opener INSTALLATION INSTRUCTIONS OWNERS COPY 1 WARNING: It is vital for the safety of persons to follow all instructions. Failure to comply with the installation

More information

Sectional And Tilting Door Opener

Sectional And Tilting Door Opener Sectional And Tilting Door Opener Installation Instructions and User Guide FS 600 FS 1000 FS 1200 600N 1000N 1200N FS 600-Speed FS 1000-Speed 600N 1000N S/N WARNING Please read the manual carefully before

More information

Acdc slimglide roller door operator

Acdc slimglide roller door operator Acdc slimglide roller door operator Owners manual ACDC SlideGlide ROLLER DOOR OPERATOR WARNING It is vital for the safety of persons to follow all instructions. Failure to comply with the installation

More information

Instruction Manual LA-SDO1 Sectional garage door opener

Instruction Manual LA-SDO1 Sectional garage door opener Instruction Manual LA-SDO1 Sectional garage door opener INSTALLATION INSTRUCTIONS OWNERS COPY 1 WARNING: It is vital for the safety of persons to follow all instructions. Failure to comply with the installation

More information

Q Digital Intelligence for the Garage. Owner s Manual. contains installation, operating, maintenance, & warranty instructions.

Q Digital Intelligence for the Garage. Owner s Manual. contains installation, operating, maintenance, & warranty instructions. Digital Intelligence for the Garage Q-7900 Owner s Manual contains installation, operating, maintenance, & warranty instructions. For residential use only. Marantec America Corporation 675 Heathrow Drive

More information

Before installation, write down the serial number and purchase date:

Before installation, write down the serial number and purchase date: Address: Website: No.23-7.Yaobei Road,Dalian,China www.seaside.net.cn GARAGE DOOR operator Models 9367 For Residential Use Only Before installation, write down the serial number and purchase date: (The

More information

DOOR LIMITS A) ENGAGE CHAIN/BELT CONNECTOR TO CARRIAGE CAUTION B) CLOSE TRAVEL LIMIT

DOOR LIMITS A) ENGAGE CHAIN/BELT CONNECTOR TO CARRIAGE CAUTION B) CLOSE TRAVEL LIMIT 20 6 DOOR LIMITS Severe injury or death can result if the door closing force is set too high. Never increase the door closing force above the minimum required to move the door. Never adjust force to compensate

More information

Installation Instructions and User Guide

Installation Instructions and User Guide Sectional And Tilting Door Opener Installation Instructions and User Guide FS 1000 1000N S/N WARNING Please read the manual carefully before installation and use. The installation of your new door opener

More information

Roll Master. Instruction Manual. To view our how to install video visit:

Roll Master. Instruction Manual. To view our how to install video visit: Roll Master Instruction Manual To view our how to install video visit: www.autoopeners.com.au 1300 42 88 66 Table of Contents Installation Instructions... 4 1. Prepare The Door... 4 2. Fixing of Door Weight

More information

Letron Auto Gates (Australia) Pty. Ltd. User s Installation Manual

Letron Auto Gates (Australia) Pty. Ltd. User s Installation Manual Letron Auto Gates (Australia) Pty. Ltd. User s Installation Manual Sliding Gate Motor AUTOMATIC OBSTRUCT PHOTO ELECTRIC BEAM ROLLING CODE SYSTEM AUTO CLOSE DOOR SOLAR COMPATIBLE ( DC ONLY ) Model SL810

More information

Types of Doors that can be automated using the digi.one: Sectional overhead doors, single/double, steel or timber. Tip up doors, steel or timber.

Types of Doors that can be automated using the digi.one: Sectional overhead doors, single/double, steel or timber. Tip up doors, steel or timber. Types of Doors that can be automated using the digi.one: Sectional overhead doors, single/double, steel or timber. Tip up doors, steel or timber. Page 1 1. Features Microprocessor based control system

More information

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors.

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. Owner s Manual Chain Or Belt Drive Please read and understand this manual and safety instructions

More information

Roller Door Operator

Roller Door Operator INSTALLATION INSTRUCTIONS AND OWNERS MANUAL Roller Door Operator IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO COMMENCING THE INSTALLATION OF THE OPERATOR UNIT CAUTION This Automatic Opener

More information

Chain Drive Garage Door Opener Model 8360 FOR RESIDENTIAL USE ONLY

Chain Drive Garage Door Opener Model 8360 FOR RESIDENTIAL USE ONLY . Write down the following information for future reference: Serial Number: Chain Drive Garage Door Opener Model 8360 FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials

More information

SKC400U SLIDING GATE OPENER OWNER S MANUAL

SKC400U SLIDING GATE OPENER OWNER S MANUAL SKC400U SLIDING GATE OPENER OWNER S MANUAL IMPORTANT SAFTEY INFORMATION Installing the SKC400U Gate Opener requires wiring of standard 110V electrical lines. This should only be performed by a trained

More information

PREMIUM Series 1/2 hp Chain Drive Garage Door Opener

PREMIUM Series 1/2 hp Chain Drive Garage Door Opener .. PREMIUM Series 1/2 hp Chain Drive Garage Door Opener Model 8365-267 FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage door

More information

SECEUROGLIDE ROLLER GARAGE DOORS, SECEUROSHIELD, SECEUROSCREEN & SECEUROVISION ROLLER SHUTTERS CONTENTS

SECEUROGLIDE ROLLER GARAGE DOORS, SECEUROSHIELD, SECEUROSCREEN & SECEUROVISION ROLLER SHUTTERS CONTENTS Operating & Maintenance Instructions SECEUROGLIDE ROLLER GARAGE DOORS, July 2007 Issue 4 SECEUROSHIELD, SECEUROSCREEN & SECEUROVISION ROLLER SHUTTERS CONTENTS Page 1. General Instructions 2 2. Operating

More information

Installation Manual. Models

Installation Manual. Models Installation Manual Models 8160 8165 8065 8075 FOR RESIDENTIAL USE ONLY Please read this manual and the safety materials carefully! The door WILL NOT CLOSE unless the Protector System is connected and

More information

OWNER S MANUAL MODEL NO. MEDIUM DUTY JACK SHAFT OPERATOR MDJ, MDJH, MDJB, MDJBH READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS SAVE THESE INSTRUCTIONS

OWNER S MANUAL MODEL NO. MEDIUM DUTY JACK SHAFT OPERATOR MDJ, MDJH, MDJB, MDJBH READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS SAVE THESE INSTRUCTIONS OWNER S MANUAL MEDIUM DUTY JACK SHAFT OPERATOR MODEL NO. NOT FOR RESIDENTIAL USE READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS SAVE THESE INSTRUCTIONS This unit is intended for limited duty applications

More information

Chain/Belt Drive Models PRE-INSTALLATION CONSIDERATIONS

Chain/Belt Drive Models PRE-INSTALLATION CONSIDERATIONS 38968503545. 08/2017 ASSEMBLY/INSTALLATION Chain/Belt Drive Models PRE-INSTALLATION CONSIDERATIONS This opener includes parts and supplies needed for installation in most garages and on most garage doors.

More information

Synergy 260, 270, 280

Synergy 260, 270, 280 Owner s Manual contains: Installation, operating, maintenance & warranty instructions. Synergy 260, 270, 280 Marantec America Corporation 5705 Centerpoint Court, Gurnee, IL 60031 U.S.A. Phone 1-888-622-2489

More information

Roll Up Door Operator

Roll Up Door Operator INSTRUCTIONS & OWNERS MANUAL Roll Up Door Operator 2 INDEX Preparation before installation 4. Terms and definitions 5. Pictures & names of parts 6. Mounting the weight bar 7. Installing the operator 7.

More information

Installation Manual. Model 8155

Installation Manual. Model 8155 Installation Manual Model 8155 FOR RESIDENTIAL USE ONLY Please read this manual and the safety materials carefully! The door WILL NOT CLOSE unless the Protector System is connected and properly aligned.

More information

Ground Control TT Leveling System OWNER'S MANUAL

Ground Control TT Leveling System OWNER'S MANUAL Ground Control TT Leveling System OWNER'S MNUL TBLE OF CONTENTS System Information 2 Features 2 Safety Information 2 Touch Pad Diagram 3 Operation 4 Basic Jack Operation 4 Unhitching From Tow Vehicle 4

More information

PREMIUM Series Chain Drive Garage Door Opener

PREMIUM Series Chain Drive Garage Door Opener . PREMIUM Series Chain Drive Garage Door Opener Model 8587RGD - 3/4 hp FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage door

More information

Synergy 360 Synergy 370. Synergy 380. Owner s Manual contains: Installation, operating, maintenance & warranty instructions.

Synergy 360 Synergy 370. Synergy 380. Owner s Manual contains: Installation, operating, maintenance & warranty instructions. Owner s Manual contains: Installation, operating, maintenance & warranty instructions. Synergy 360 Synergy 370 Synergy 380 Carriage House & Wind-Loaded Garage Door Operator System Install on Sectional

More information

IMPORTANT SAFETY RECOMMENDATIONS

IMPORTANT SAFETY RECOMMENDATIONS - 1 - - 2 - IMPORTANT SAFETY RECOMMENDATIONS FAILURE TO COMPLY WITH THE FOLLOWING SAFETY RECOMMENDATIONS MAY RESULT IN SERIOUS PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE The installation of the Automatic

More information

Installation Instructions and Owner s Manual

Installation Instructions and Owner s Manual Sectional Garage Door Opener Model DCS2 Installation Instructions and Owner s Manual READ THIS MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION Installer: Permanently attach manual to the wall. Date: Description:

More information

Delete top and bottom bor SDO - C

Delete top and bottom bor SDO - C - 1-802-001-02 D Delete top and bottom bor - 2 - SDO - C CONTENTS Important Safety Recommendations... 4 Warranty Exclusions. 5 Assembly Instructions. 6 Identifying Garage Door Type. 6 Assembling Drive

More information

For more information: or call toll free at

For more information:  or call toll free at For more information: www.devancocanada.com or call toll free at 855-931-3334 Contents Preparation........................................ 3 Assembly......................................... 8 Installation........................................

More information

D-FORCE1500PV GARAGE DOOR OPENER

D-FORCE1500PV GARAGE DOOR OPENER D-FORCE1500PV GARAGE DOOR OPENER WARNING: IT IS VITAL FOR THE SAFETY OF ALL PERSONS INSTALLING AND USING THIS OPENER TO FOLLOW THE INSTALLATION INSTRUCTIONS AND SAFETY WARNINGS. FAILURE TO COMPLY MAY RESULT

More information

Synergy 260, 270, 280

Synergy 260, 270, 280 Owner s Manual contains: Installation, operating, maintenance & warranty instructions. Synergy 260, 270, 280 Marantec America Corporation 5705 Centerpoint Court, Gurnee, IL 60031 U.S.A. Phone 1-888-622-2489

More information

MT3850EVO INSTALLATION AND OPERATING INSTRUCTIONS. Owner s Copy: Keep these Instructions for Future Reference. gomerlin.com.au gomerlin.co.

MT3850EVO INSTALLATION AND OPERATING INSTRUCTIONS. Owner s Copy: Keep these Instructions for Future Reference. gomerlin.com.au gomerlin.co. gomerlin.com.au gomerlin.co.nz MT3850EVO with Security + 2.0 Sectional Garage Door Opener INSTALLATION AND OPERATING INSTRUCTIONS Owner s Copy: Keep these Instructions for Future Reference. Please read

More information

MARTIN DC3700/DC2500 GARAGE DOOR OPENER SYSTEM. DC3700: Belt only up to 12 (3700) high doors / DC2500: Chain only up to 10 (3050) high doors

MARTIN DC3700/DC2500 GARAGE DOOR OPENER SYSTEM. DC3700: Belt only up to 12 (3700) high doors / DC2500: Chain only up to 10 (3050) high doors MARTIN DC3700/DC2500 GARAGE DOOR OPENER SYSTEM DC3700: Belt only up to 12 (3700) high doors / DC2500: Chain only up to 10 (3050) high doors Quietest The World s Q uietest Door Opene r. INSTRUCTION MANUAL

More information

Synergy Solo. Owner s Manual contains: Installation, operating, maintenance & warranty instructions. Install on Sectional Doors Only

Synergy Solo. Owner s Manual contains: Installation, operating, maintenance & warranty instructions. Install on Sectional Doors Only Owner s Manual contains: Installation, operating, maintenance & warranty instructions. Synergy Solo Install on Sectional Doors Only Marantec America Corporation 5705 Centerpoint Court, Gurnee, IL 60031

More information

Porte 150 Users Manual Swing Gate Opener 24V DC

Porte 150 Users Manual Swing Gate Opener 24V DC Porte 150 Users Manual Swing Gate Opener 24V DC for residential use only Signal Light Push-button Control Box 14 Contents 1. Important Safety Information 2. Product Description and Application 2.1 Application

More information

Models. ELITE Series Garage Door Opener CONTENTS DC Belt Drive with Battery Backup /4 hp Belt Drive FOR RESIDENTIAL USE ONLY

Models. ELITE Series Garage Door Opener CONTENTS DC Belt Drive with Battery Backup /4 hp Belt Drive FOR RESIDENTIAL USE ONLY . ELITE Series Garage Door Opener Models 8550 - DC Belt Drive with Battery Backup 8557-3/4 hp Belt Drive FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten

More information

IMPORTANT SAFETY RECOMMENDATIONS

IMPORTANT SAFETY RECOMMENDATIONS 801-001-01 C IMPORTANT SAFETY RECOMMENDATIONS FAILURE TO COMPLY WITH THE FOLLOWING SAFETY RECOMMENDATIONS MAY RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. 1. For ADDITIONAL SAFETY we STRONGLY

More information

GENERAL SAFETY... 3 PARTS LIST...

GENERAL SAFETY... 3 PARTS LIST... Rev 17a 1 GENERAL SAFETY... 3 PARTS LIST... 4 GTR100... 4 GTR058... 5 TECHNICAL SPECIFICATIONS... 6 FEATURES:... 6 QUICK INSTALLATION GUIDE... 7 GATE ARM INSTALLATION... 8 BEFORE YOU START... 8 INSTALLATION

More information

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL INSTALLATION INSTRUCTIONS AND OPERATION MANUAL UL325-2010 Compliant Commercial and Industrial Door Operator Logic Control Continuous Duty IMPORTANT INSTALLATION INSTRUCTIONS WARNING To reduce the risk

More information

DTS 600/800 SECTIONAL DOOR OPERATOR INSTALLATION MANUAL. Comply to: SANS IEC NRCS Cert. no /002

DTS 600/800 SECTIONAL DOOR OPERATOR INSTALLATION MANUAL. Comply to: SANS IEC NRCS Cert. no /002 DTS 600/800 SECTIONAL DOOR OPERATOR INSTALLATION MANUAL Comply to: SANS IEC 60-335-2-103 NRCS Cert. no. 88934/002 DTS SECURITY P.O.BOX 3399 EDENVALE 1610 TELEPHONE 086 1000 387 Base plate-mounting instructions

More information

Wi-Fi Garage Door Opener

Wi-Fi Garage Door Opener Wi-Fi Garage Door Opener Belt Drive Models 8550W and 8550W-267 SERIAL NUMBER: www.prodregister.com/liftmaster Contents Preparation........................................ 3 Assembly.........................................

More information

Porte 300 Users Manual Swing Gate Opener 24V DC for residential use only

Porte 300 Users Manual Swing Gate Opener 24V DC for residential use only Porte 300 Users Manual Swing Gate Opener 24V DC for residential use only Signal Light Push-button Control Box Gate 2 Gate 1 Contents 1. Important Safety Information 2. Product Description and Application

More information

How to Install a Garage Door Opener

How to Install a Garage Door Opener How to Install a Garage Door Opener While installing a garage door opener is a relatively straightforward project, the installation process is too detailed - and too manufacturer-specific - to be covered

More information

/ / Preparation. Safety Symbol and Signal Word Review. MyQ Serial Number. Unattended Operation. MyQ Serial Number: Product S/N: Date of Purchase:

/ / Preparation. Safety Symbol and Signal Word Review. MyQ Serial Number. Unattended Operation. MyQ Serial Number: Product S/N: Date of Purchase: Wi-Fi Garage Door Opener Chain Drive Models 8587W and 8587WL FOR RESIDENTIAL USE ONLY Please read this manual and the safety materials carefully! The door WILL NOT CLOSE unless the Protector System is

More information

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL INSTALLATION INSTRUCTIONS AND OPERATION MANUAL Commercial and Industrial Fire Door Operator Logic Control Restricted Duty Fire Door Operators IMPORTANT INSTALLATION INSTRUCTIONS WARNING To reduce the risk

More information

INSTRUCTION MANUAL. Featuring Martin Low Risk Finger Shield Garage Doors. With Photo Eyes DC2500e DC3700e DC3700e-H

INSTRUCTION MANUAL. Featuring Martin Low Risk Finger Shield Garage Doors. With Photo Eyes DC2500e DC3700e DC3700e-H R INSTRUCTION MANUAL Featuring Martin Low Risk Finger Shield Garage Doors Quietest The World s Quietest Door Openers. With Photo Eyes DC2500e DC3700e DC3700e-H * Without Photo Eyes* DC2500e-O DC3700e-O

More information

Model 8587WRGD Chain Drive Garage Door Opener

Model 8587WRGD Chain Drive Garage Door Opener WiFi Garage Door Opener Model 8587WRGD Chain Drive Garage Door Opener FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage door

More information

Please read and understand this manual and safety instructions carefully before installation.

Please read and understand this manual and safety instructions carefully before installation. For Use With Residential Sectional Garage Doors Only Owner s Manual Please read and understand this manual and safety instructions carefully before installation. The Opener WILL NOT CLOSE until the Photo

More information

RollSeal 1733 County Road 68 Bremen, Alabama Part No Rev Owner s Manual RS-Divider Curtain

RollSeal 1733 County Road 68 Bremen, Alabama Part No Rev Owner s Manual RS-Divider Curtain 1. 2. 7 3. 4. RollSeal 1733 County Road 68 Bremen, Alabama 35033 256-287-7000 Part No 4801-5176 Rev 12-11-17 Owner s Manual RS-Divider Curtain Table of Contents 1 Warnings (Avertissements)... 3 2 Limited

More information

CHECKLIST & COMPONENTS

CHECKLIST & COMPONENTS Eclipse Compact www.rollershuttercompany.com Tel 0800 6444121 55mm Roller Garage Doors CHECKLIST & COMPONENTS EQUIPMENT REQUIRED 2 x Step ladders or hop ups Spirit level Tape measure Power drill 10mm A/F

More information

DELUXE Series Chain Drive Wi-Fi Garage Door Opener

DELUXE Series Chain Drive Wi-Fi Garage Door Opener DELUXE Series Chain Drive Wi-Fi Garage Door Opener Model 8365WRGD-267-1/2 hp FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage

More information

Wi-Fi Garage Door Opener

Wi-Fi Garage Door Opener Wi-Fi Garage Door Opener Premium Series Chain Drive Models 8360W and 8360WL FOR RESIDENTIAL USE ONLY Please read this manual and the safety materials carefully! The door WILL NOT CLOSE unless the Protector

More information

MT3850WL INSTALLATION AND OPERATING INSTRUCTIONS. Owner s Copy: Keep these Instruction for Future Reference.

MT3850WL INSTALLATION AND OPERATING INSTRUCTIONS. Owner s Copy: Keep these Instruction for Future Reference. www.chamberlainanz.com MT3850WL Sectional Garage Opener INSTALLATION AND OPERATING INSTRUCTIONS Owner s Copy: Keep these Instruction for Future Reference. Please read this manual and the enclosed safety

More information

GARAGE DOOR OPENER MODEL: HANDLES DOORS 18 FT. WIDE & UP TO 7FT.TALL

GARAGE DOOR OPENER MODEL: HANDLES DOORS 18 FT. WIDE & UP TO 7FT.TALL GARAGE DOOR OPENER MODEL: 45-1670 HANDLES DOORS 18 FT. WIDE & UP TO 7FT.TALL NOTICE: This opener will not work until you set the travel limits and the auto force adjustment. You must follow all steps located

More information

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL INSTALLATION INSTRUCTIONS AND OPERATION MANUAL NEMA 4X UL325-2010 Compliant Commercial and Industrial Door Operator Logic Control Continuous Duty IMPORTANT INSTALLATION INSTRUCTIONS WARNING To reduce the

More information

Installation Guide Section1

Installation Guide Section1 Certification Test Report 908.42 MHz Low Power Communication Device Transceiver 372 MHz Discrete Receiver FCC ID: KJ8-0001715 IC: 3540A-0001715 FCC Rule Part: 15.249 IC Radio Standards Specification: RSS-210

More information

WWWAUTO-ROLLER.CO.ZA INSTALLATION MANUAL AUTO- ROLLER

WWWAUTO-ROLLER.CO.ZA INSTALLATION MANUAL AUTO- ROLLER WWWAUTO-ROLLER.CO.ZA INSTALLATION MANUAL AUTO- ROLLER Notice. Please read these instructions carefully before installing the Rolling Door motor 1. The motor must be installed and operated by a professional.

More information

User Instruction manual for Cardale Autoglide

User Instruction manual for Cardale Autoglide User Instruction manual for Cardale Autoglide NOTE TO INSTALLER: This user manual is supplied for the instruction of the end user. It contains important safety and warranty information. This manual MUST

More information

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL INSTALLATION INSTRUCTIONS AND OPERATION MANUAL Cornell RG Operator RGRL Series (w/ Internal Interlock sensor) ES 10-288 GENERAL NOTES TO REDUCE THE RISK OF SEVERE INJURY OR DEATH, READ AND FOLLOW ALL INSTALLATION

More information

Owner s Manual C205. Garage Opener. Contents. Chain Drive Garage Door Opener FOR RESIDENTIAL USE ONLY PRE-PROGRAMMED REMOTE CONTROL INCLUDED

Owner s Manual C205. Garage Opener. Contents. Chain Drive Garage Door Opener FOR RESIDENTIAL USE ONLY PRE-PROGRAMMED REMOTE CONTROL INCLUDED Garage Opener Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage door after installation. The door WILL NOT CLOSE unless the Protector System is connected

More information

GARAGE DOOR OPERATORS SDO4 GARAGE DOOR OPERATOR INSTALLATION MANUAL

GARAGE DOOR OPERATORS SDO4 GARAGE DOOR OPERATOR INSTALLATION MANUAL GARAGE DOOR OPERATORS SDO4 GARAGE DOOR OPERATOR INSTALLATION MANUAL Centurion Systems (Pty) Ltd COMPANY PROFILE Company profile 1986 1990 1995 1999 Today In-house R&D development team Manufacture to international

More information

SLIDING DOOR OPERATOR INSTRUCTION MANUAL

SLIDING DOOR OPERATOR INSTRUCTION MANUAL SLIDING DOOR OPERATOR INSTRUCTION MANUAL (MODEL NO. 1071.101 & 1071.102) Please carefully keep this manual for good maintenance. Caution Be sure the door opener is far away from moisture, vibration, and

More information

Garage Door Opener IQ SERIES DC Motor Chain Drive Owner s Manual

Garage Door Opener IQ SERIES DC Motor Chain Drive Owner s Manual www.skylinkhome.com Garage Door Opener IQ SERIES DC Motor Chain Drive Owner s Manual Please read this manual and enclosed safety materials carefully! Safety Infrared Sensor MUST BE INSTALLED and aligned

More information

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors.

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. Owner s Manual Please read and understand this manual and safety instructions carefully

More information

INSTALLATION & OWNERS MANUAL. PowerGlide. PowerGlide

INSTALLATION & OWNERS MANUAL. PowerGlide. PowerGlide RR INSTALLATION & OWNERS MANUAL PowerGlide Sectional Door Operator PowerGlide Sectional Door Operator N 13655 WARNING MOTORIZED SOLUTIONS www.acdcms.com.au AUSTRALIA 240V WARNING: It is crucial that these

More information

GLM SERIES CONTROL Users Manual Rev:

GLM SERIES CONTROL Users Manual Rev: GLM SERIES CONTROL Users Manual Rev: 808062 Connecting Power Page 2 Motor Terminal Wiring Diagrams Page 3 Getting Started / Setup Page 4 1. Obstruction Detection Devices Page 4 2. Checking Power and Direction

More information

BARRY BARRIER GATE AUTOMATION

BARRY BARRIER GATE AUTOMATION BARRY BARRIER GATE AUTOMATION Installation Manual 1. WARNINGS AND GENERAL SAFETY INSTUCTIONS This manual contains important safety information. An incorrect installation or an improper use may cause serious

More information

User manual. e-gate SLD-24V

User manual. e-gate SLD-24V User manual FOR e-gate SLD-24V 24V Sliding Gate Operators Contents how to use your automatic gate operator...... 1 how the controls work.................. 2 how to manually release the gate...........

More information

Installation and Operating Guide for the garagedoor lock. Pro-Series 125 A. Random-Code Remotes allow secure wireless control of the locking system

Installation and Operating Guide for the garagedoor lock. Pro-Series 125 A. Random-Code Remotes allow secure wireless control of the locking system Installation and Operating Guide for the garagedoor lock Pro-Series 125 A Random-Code Remotes allow secure wireless control of the locking system Note: Exterior Key Release, Pull Cable Kit, must be installed

More information

3/4 hp Chain Drive Garage Door Opener. Model PD752KEV

3/4 hp Chain Drive Garage Door Opener. Model PD752KEV .. 3/4 hp Chain Drive Garage Door Opener Model PD752KEV FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage door after installation.

More information

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors.

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. Owner s Manual Please read and understand this manual and safety instructions carefully

More information

MARTIN DC2500e/ GARAGE DOOR OPENER SYSTEM. DC2500e Chain Drive: Doors up to 10 (3100) High. DC3700e Belt Drive: Doors up to 14 (4300) High.

MARTIN DC2500e/ GARAGE DOOR OPENER SYSTEM. DC2500e Chain Drive: Doors up to 10 (3100) High. DC3700e Belt Drive: Doors up to 14 (4300) High. MARTIN DC2500e/ GARAGE DOOR OPENER SYSTEM DC3700e DC2500e Chain Drive: Doors up to 10 (3100) High. DC3700e Belt Drive: Doors up to 14 (4300) High. Q u i e t e s t T he Wo rld s QuietestDoorOpen er. INSTRUCTION

More information

CONTENTS. 3/4 hp Belt Drive Garage Door Opener. Model HD630EVP FOR RESIDENTIAL USE ONLY

CONTENTS. 3/4 hp Belt Drive Garage Door Opener. Model HD630EVP FOR RESIDENTIAL USE ONLY .. 3/4 hp Belt Drive Garage Door Opener Model HD630EVP FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage door after installation.

More information

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL INSTALLATION INSTRUCTIONS AND OPERATION MANUAL - 1/3, 1/2, 3/4hp UL325-2010 Compliant Commercial and Industrial Door Operator Logic Control Duty Cycle 20 Cycles per Hour IMPORTANT INSTALLATION INSTRUCTIONS

More information

HIGH SPEED SLIDING GATE OPENER

HIGH SPEED SLIDING GATE OPENER HIGH SPEED SLIDING GATE OPENER Model: is1200 + Elsema s Eclipse Control Card with GDS Operator USER MANUAL CONTENTS Section No: Page No: 1 Safety Precautions 3 2 Wiring Requirements 4 3 Installation details

More information

Gate Operators, Inc. Model 7100UL Residential & Medium Duty Commercial Slide Gate Operator INSTALLATION MANUAL

Gate Operators, Inc. Model 7100UL Residential & Medium Duty Commercial Slide Gate Operator INSTALLATION MANUAL Gate Operators, Inc. Model 7100UL Residential & Medium Duty Commercial Slide Gate Operator INSTALLATION MANUAL 10-04-00 CONTENTS Safety Precautions... 2 Applications... 3 Pre-Installation Checklist...

More information

GARAGE DOOR OPENER Model 3595LM 3/4 HP

GARAGE DOOR OPENER Model 3595LM 3/4 HP The Chamberlain Group, Inc. 845 Larch Avenue Elmhurst, Illinois 60126-1196 www.liftmaster.com GARAGE DOOR OPENER Model 3595LM 3/4 HP For Residential Use Install on Sectional Doors ONLY THIS OPERATOR IS

More information

SECTIONAL - 750(1200) INSTALLATION MANUAL

SECTIONAL - 750(1200) INSTALLATION MANUAL SECTIONAL 750(1200) INSTALLATION MANUAL Contents A. Inventory...3 B. Function Introduction...4 C. Assembly rocedure...5 D. The Main Body and rogram anel...9 E. Wiring Diagram for Infraed Beam...10 F. rogramming...11

More information

3/4 hp Belt Drive Garage Door Opener. Model HD620EV

3/4 hp Belt Drive Garage Door Opener. Model HD620EV .. 3/4 hp Belt Drive Garage Door Opener Model HD620EV FOR RESIDENTIAL USE ONLY Please read this manual and the enclosed safety materials carefully! Fasten the manual near the garage door after installation.

More information

MEDIUM DUTY DOOR OPERATOR MODELS MT5011U & BMT5011U

MEDIUM DUTY DOOR OPERATOR MODELS MT5011U & BMT5011U MEDIUM DUTY DOOR OPERATOR MODELS MT0U & BMT0U INSTALLATION MANUAL Now with Built in Radio Receiver MHz Your model may look different than the model illustrated in this manual. YEAR WARRANTY Serial # (located

More information

GENERAL PRESENTATION 2 SAFETY INSTRUCTIONS 2 Caution 2 Safety instructions 2

GENERAL PRESENTATION 2 SAFETY INSTRUCTIONS 2 Caution 2 Safety instructions 2 5048551A- 26/04/07 14:36 Page 1 CONTENTS GENERAL PRESENTATION 2 SAFETY INSTRUCTIONS 2 Caution 2 Safety instructions 2 PRODUCT DESCRIPTION 2 Product components 2 Types of door 2 POINTS TO CHECK PRIOR TO

More information

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL INSTALLATION INSTRUCTIONS AND OPERATION MANUAL FS Series Rolling Fire Door Operators UL325-2010 Compliant Restricted Duty Operators CORPORATION IMPORTANT INSTALLATION INSTRUCTIONS WARNING To reduce the

More information

AgriWheel Single Gate Kit Low Voltage & Solar. Installation & Operating Instructions

AgriWheel Single Gate Kit Low Voltage & Solar. Installation & Operating Instructions AgriWheel Single Gate Kit Low Voltage & Solar Installation & Operating Instructions Thank you for purchasing you AgriWheel system. Please remove the lids from both the machine and control box and remove

More information

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors.

WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. WARNING: To reduce the risk of injury to persons - Use this operator only with Residential Sectional Garage doors. Owner s Manual Please read and understand this manual and safety instructions carefully

More information

WheelieSafe. WheelieSafe. User Manual. Motorized Trolley. Distributor:

WheelieSafe. WheelieSafe. User Manual. Motorized Trolley. Distributor: WheelieSafe Motorized Trolley WheelieSafe Distributor: User Manual You must read this manual before using your WheelieSafe trolley P/N: 9023100 Rev. 01/16 Table of contents Contents Pages Safety Symbols,

More information

CONTENTS. Chain/Cable Drive DC Garage Door Opener. Model 8010 FOR RESIDENTIAL USE ONLY INSTALL ON 7 OR 8 FOOT SECTIONAL DOORS ONLY

CONTENTS. Chain/Cable Drive DC Garage Door Opener. Model 8010 FOR RESIDENTIAL USE ONLY INSTALL ON 7 OR 8 FOOT SECTIONAL DOORS ONLY Chain/Cable Drive DC Garage Door Opener Model 8010 FOR RESIDENTIAL USE ONLY INSTALL ON 7 OR 8 FOOT SECTIONAL DOORS ONLY Register your garage door opener to receive updates and offers from LiftMaster Take

More information

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL INSTALLATION INSTRUCTIONS AND OPERATION MANUAL - 1/3, 1/2, 3/4hp UL325-2010 Compliant Commercial and Industrial Door Operator Logic Control Duty Cycle 20 Cycles per Hour IMPORTANT INSTALLATION INSTRUCTIONS

More information

MR60. Rolling Garage Door Opener. Installation and Operating Instructions. Owners Copy: Please keep these instructions for future reference

MR60. Rolling Garage Door Opener. Installation and Operating Instructions. Owners Copy: Please keep these instructions for future reference www.chamberlainanz.com MR60 MR60 Rolling Garage Door Opener Installation and Operating Instructions Owners Copy: Please keep these instructions for future reference This manual contains IMPORTANT SAFETY

More information

Automatic Garage Door Operator

Automatic Garage Door Operator Automatic Garage Door Operator support@et.co.za ET Systems (PTY) Ltd 15 Nelson Rd, Observatory, Cape Town, South Africa www.et.co.za Technical specifications may change without prior notice. All goods

More information