LELY TIGO Loader wagons

Size: px
Start display at page:

Download "LELY TIGO Loader wagons"

Transcription

1 LELY TIGO Loader wagons innovators in agriculture

2 Chop for efficient rumination CUTTING DRYING COLLECTING Cut the grass your animals need. Rapid wilting retains the quality. Ash is ballast for animals. Feed efficiency and our wide range 2

3 LELY TIGO Insights on chopping Chop for efficient rumination. Chopping leads to higher density. Sharp knifes make a difference. CHOPPING COMPACTING SEALING Ensure a rapid start of the fermentation process. Keep oxygen out and quality in. of forage machines 3

4 A smooth drive line with a long lifespan Gentle handling, maximised filling The drive unit is supported in a maintenance friendly long lasting gearbox. Engineered to withstand high tolerance, power is transmitted to the cutting rotor via a strong spur-gear transmission. 4

5 LELY TIGO Camless pick-up for more efficient loading Good crop throughput for optimal loading capacity Minimum space ensures an optimal chopping action The efficiency of loader wagons is linked to their pick-up capacity. Therefore, Lely Tigo loader wagons are equipped with a low maintenance and reliable camless pick-up, which has five tine bars to ensure maximum output. The pick-up and loading unit are positioned close together and operate at a similar speed. Consequently, the pick-up does not need a high rotation speed to bridge the distance to the rotor, which favours crop intake as well as durability. The gap between the wide tines of the rotor and the blades is smallest with Lely Tigo loader wagons in comparison with other machines. This minimal space ensures the best chopping action and optimum cut. 5

6 Camless pick-up unit for more efficient loading The efficiency of a loader wagon is greatly dependent upon pick-up capacity. The Tigo models are equipped with a pick-up which no longer utilises cam-track steering. This makes the pick-up more reliable, less sensitive to wear, quieter and maintenance friendly. 6

7 LELY TIGO Numerous benefits The camless pick-up by Lely: Five tine bars ensure excellent crop throughput. Clean pick-up due to the reinforced tines positioned close to each other (54 mm). Tine loss protection. Low-wear thanks to non-steered tines. Smooth running due to lack of cam-track steering. Maintenance friendly as components need no lubrication. Good forage starts with clean loading The closely spaced (54 mm) tines of the 1,800 mm working width pick-up with five rows of tines ensure precise crop pick-up and efficient transfer to the feed unit. Good crop throughput for maximum loading capacity Good crop throughput results in a consistent intake load, which means that maximum capacity can be achieved with minimal power and wear. The pick-up and chopping rotor are positioned close together and run at virtually the same relatively low speed, thus providing excellent crop-flow handling. Wear-resistant and maintenance friendly Since the camless pick-up does not have a cam track, the pick-up unit consists of fewer moving parts. This is more reliable, less sensitive to wear, quieter and maintenance free. Furthermore, the tines are reinforced and all components are hot-dip galvanised to protect them even more effectively against the elements and corrosive sap from the crop. The result is clear to see: lower maintenance costs and a higher trade-in value! Pick-up touch roller (optional for Tigo MR) Running in the centre of the tractor track, ensuring a reliable pick-up following in the most difficult ground conditions. Ground contour following for Tigo models The floating pick-up design gives precise ground contour. Wind guard with short crop roller The height-adjustable impact plate with the short crop roller ensures even better crop collection (standard on all Tigo R models). Camless pick-up Five rows of non-steered tines spaced just 54 mm apart ensure an extremely clean crop pick-up across a working width of 1.80 m. Castor action pick-up guide wheels The castor action pick-up guide wheels, which are height adjustable, relieve the load on the pick-up when turning. 7

8 Tigo S and MS optimal crop treatment The heart of the Tigo S and MS is the cam-track-steered load unit. Three (Classic models) or five robust feed forks ensure an even and fast feed intake. The kidney-shaped cam track steers the rakes smoothly and gently into the load unit. The twin tines of the rakes maintain contact with the crop at an ideal angle until they are retracted shortly before the crop enters the loading wagon. The gentle action of the loading and cutting process results in high-quality forage. Kidney-shaped cam track The kidney-shaped cam track steers the rakes smoothly and gently into the load unit. Twin-tine feed rakes The twin tines of the rakes form a very small cutting gap for the knives, ensuring a precise chopping action. Crop treatment The twin tines maintain contact with the crop at an ideal angle until they are retracted in a horizontal position. Direct drive Engineered to withstand high tolerance, power is transmitted to the cutting rotor via a strong spur-gear transmission. Roller bearings Each feed fork is mounted on two individual roller bearings. From the Lely Tigo 40 S model onwards all bearings have central lubrication as standard. 8

9 LELY TIGO Tigo MR and MR Profi efficient chopping Lely Tigo MR wagons feature a highly efficient chopping rotor so that you can obtain the maximum yield from your investment. Accordingly, five spiral-shaped rows of tines prevent power peaks and ensure smooth running. The rotor conveys the crop smoothly, powerfully and extremely gently across a 1 m² surface into the wagon. Spiral-shaped rotor Five spiral-shaped rows of tines prevent power peaks and ensure smooth running. Extremely wide rotor tines The rotor tines have a 25 mm wide flat edge, which results in enhanced thrust with a low power requirement. Crop treatment Thanks to the large surface area of over 1 m² together with the 25 mm wide tines, the Tigo rotor can pack fodder optimally. Direct drive Engineered to withstand high tolerance, power is transmitted to the cutting rotor via a strong spur-gear transmission. Roller bearings The rotor is fitted with generously sized self-aligning bearings at both ends. 9

10 High-performance cutting unit for precise short chopping The Tigo cutting units consists of long, robust knives which are serrated on one side. Every knife is protected by the Trimatic knife-protection system. The chopping length can be quickly changed by simply pre-selecting different knives. When the system blocks, the entire chopping unit can be easily lowered hydraulically from the tractor cab. Lely Tigo S and MS Profi Chopping quality The Tigo S and MS Profi models feature a chopping unit which can be fitted with thirty-three knives. This results in a minimum chopping length of 38 mm. The twin tines of the rakes together with these knives provide a highly precise chopping action. Chopping length The full set of knives is actually split into two groups. The chopping length can be adjusted via a lever which selects the required number of knives (0/5/17/21/33). Knife protection A Trimatic knife-protection system protects the knives and the rotor against damage. 10

11 LELY TIGO Pivoting chopping unit A blockage can be easily removed by pivoting the chopping unit (hydraulic actuation optional). The chopping unit can be easily lowered for sharpening, and for more major maintenance jobs the unit can be placed on special service wheels. Optimum ease of maintenance, central unlocking of the chopping unit For the Lely Tigo MR range, the chopping unit can be hydraulically pivoted either from the tractor terminal or using the two buttons on the left side of the wagon. The chopping unit can be unlocked and pivoted out to the side without the need for tools. The central knife-unlocking system unlocks all of the knives at the same time. They can then be removed easily, once again without the use of tools. The integrated holding device on the back of the knife further improves convenience when changing knives. Knife protection Each knife is individually safeguarded by the Trimatic knife-protection system. Should a foreign object enter the cutting unit, the release spring flexes, immediately reducing the force on the knife and thus saving the rotor and the knives from damage. Once the obstacle has passed, the knife returns to its operating position again. Lely Tigo MR Chopping quality The Tigo MR chopping unit can be fitted with thirty-one knives. This results in a minimum chopping length of 45 mm. The wide edges on the rotor tines together with these knives provide a highly precise chopping action. Chopping length The full set of knives is actually split into two groups, so a selection can easily be made between not chopping, chopping to 90 mm or chopping to 45 mm. Toolless knife replacement The long, robust knives, serrated on one side, ensure optimum chopping results and can be replaced without tools. 11

12 A strong drive for strong performance The drive unit of the Tigo S, MS and MR is powered by a low wear, maintenance friendly gearbox with extremely strong spur gears. Its ability to absorb high loads ensures consistent and smooth running of the wagon. Therefore these loader wagons stand out due to their smooth running and unparalleled durability. 12

13 LELY TIGO Geared drive The more efficient the drive line, the more power you have at your disposal for collecting, chopping and loading. The basic prerequisite for this is high-performance drive technology: the drive unit is supported in a maintenance-friendly low-wear gearbox. Engineered to withstand high tolerance, power is transmitted to the cutting rotor via a strong spur-gear transmission. Maximum functional safety All drive-side bearing points are equipped with generously dimensioned self-aligning roller bearings. Only Lely provides this feature, which ensures a long lifetime. Functional safety is top priority for Lely. Removing welded joints allows better dimensional accuracy, safe running and an extremely long lifetime. That is why all power-transmitting parts are firmly bolted together. Strong drive elements The chopping rotor drive is also top quality. The high-strength drive shaft is able to cope with a variety of loads. The bolted connection with the chopping rotor ensures maximum installation accuracy and precise running. Casing Bearings Gears Chopping rotor Shafts 13

14 Maximum ease of operation Spool valve control as standard The main functions of the Tigo S are actuated by means of a hydraulic valve control. Optionally an electromagnetic control box is available as well. Tigo S Electromagnetic control box The Electromagnetic control box is standard on the Lely Tigo MS and MR models and an optional extra on Tigo S models. All functions can be controlled via this exceptionally userfriendly control box in the tractor cab (suitable for load sensing!). Tigo MS and MR ISOBUS control ISOBUS control is standard on the Tigo MS D, MR D and MR Profi models. The loader wagon can be controlled from the tractor terminal or from the ISOBUS control unit. The Layout of the loader wagon functions on the tractor joystick provides maximum operating comfort. The ISOBUS control provides for maximum operator comfort and additional functions such as: Speed-dependent locking of the steering axle. Integrated diagnosis system. 14

15 LELY TIGO Skilled! You work with our machines in the great outdoors. New challenges are presented to machines every day. It is for this reason that our dealers are skilled and geared up to respond rapidly. They hold stock of the most essential parts and have the expertise to keep machines performing optimally. We ensure that your Forage Harvesting goes smoothly. 15

16 16

17 LELY TIGO 17

18 Lely Tigo S MS MR MR Profi 18

19 LELY TIGO Lely Tigo S The Tigo S is a compact loader wagon series with a controlled feed unit. Lely provides the correct model for any operation with three (Classic models) or five swing arms. The high-performance chopping unit can be fitted with up to thirty-three knives, which are easy to replace. The low loader models with low centres of gravity and wide tracks appeal to users due to their safe operation on slopes and their low empty weight. TECHNICAL SPECIFICATIONS TIGO S 25 ST Classic 35 S(T) Classic 35 S(T) 40 S(T) 50 S(T) Volume (DIN 11471) (m 3 ) Capacity (medium compaction)* (m 3 ) Maximum permissible weight (kg) 5,800/6,200 5,800/6,200 6,200 8,000/11,000 8,000/11,000 Number of swing arms Minimum chop length (mm) Working width of pick-up (DIN) (m) Lely Tigo MS The Tigo MS series has been developed especially for the modern high performance agricultural business. The camless pendulum pick-up with five rows of tines ensures clean pick-up of crops. The feed unit is powered by a heavy-duty gear drive and has five stable feed forks to transfer the crop smoothly and extremely gently into the wagon. The Tigo MS series is available in four wagon types from 40 m³ to 70 m³ and two discharge wagon models. TECHNICAL SPECIFICATIONS TIGO MS MS 40 (D) MS 50 (D) MS 60 MS 70 Volume (DIN 11471) (m 3 ) 26 (25.7/28.7**) 30 (28.7/31.7**) Capacity (medium compaction)* (m 3 ) Maximum permissible weight (kg) 12,000/15,000 12,000/15,000 12,000/15,000 12,000/15,000 Number of swing arms Minimum chop length (mm) Working width of pick-up (DIN) (m) Lely Tigo MR The Tigo MR models are loader wagons for medium to large agricultural businesses that produce their own silage. They are robust and provide increased capacity. These wagons are fitted with a thirty-one knife 800 mm chopping rotor and a five tine bar camless pick-up. The configuration of these wagons is simple, but it boasts high capacity and ease of operation. TECHNICAL SPECIFICATIONS TIGO MR MR 40 (D) MR 50 (D) MR R(D) Profi Volume (DIN 11471) (m 3 ) (25.70/28.70**) (28.70/31.70**) (33.80/36.80**) (28.70/31.70**) Capacity (medium compaction)* (m 3 ) Maximum permissible weight (kg) 12,000/17,000 12,000/17,000 12,000/17,000 16,000 Feed unit Rotor Rotor Rotor Rotor Minimum chop length (mm) Working width of pick-up (DIN) (m) Lely Tigo MR Profi The Lely Tigo MR Profi models have been specifically designed to transport massive silage volumes. The tandem axle ensures that you can drive safely even when the wagon is heavily loaded. The straight, profiled superstructure with its stanchions positioned close to one another ensures maximum stability of the wagon. TECHNICAL SPECIFICATIONS TIGO MR Profi MR 50 (D) Profi MR 60 (D) Profi Volume (DIN 11471) (m 3 ) 30.7/ /36.7 Capacity (medium compaction)* (m 3 ) Maximum permissible weight (kg) 12,000/17,000 12,000/17,000 Minimum chop length (mm) Working width of pick-up (DIN) (m) * Depending on crop conditions / ** Without discharge rollers / D = With discharge rollers 19

20 Lely Tigo S The Tigo S range has a model suitable for all farms. This is due to there being a choice of four different sizes, single or tandem axles and foldable or rigid extension sides. The Tigo ST models have been especially developed for mountainous regions. Their ability to operate in such circumstances is due to the combination of wide track width and a low centre of gravity. 20

21 LELY TIGO Optimum crop treatment The swing-arm feed unit of the Tigo S ensures optimal crop treatment. The crop friendly kidney-shaped cam track steers the feed forks smoothly through the loading area. The double tines mounted on the feed forks remain in contact with the crop at an ideal angle until they are retracted again. The result: maximum filling of the wagon with careful crop treatment. Unique gear drive The feed unit is powered by a heavy-duty gear drive. Its ability to absorb high loads ensures consistent and smooth running of the wagon. Each feed fork is mounted on two individual roller bearings. From the Lely Tigo 40 S model upwards all bearings have central lubrication as standard. Perfect cutting quality All Tigo S models can be fitted with a maximum of thirty-three knives arranged in two rows, giving chop lengths down to 38 mm. The chopping length can be adjusted via a lever which selects the required number of knives (0/5/17/21/33). The knife shape ensures an even cutting action. Each knife is protected against foreign objects and can be changed without the need for special tools. A blockage can be easily removed by pivoting the chopping unit (hydraulic actuation optional). The chopping unit can be easily lowered for sharpening, and for more major maintenance jobs the unit can be placed on special service wheels. 21

22 Ground contour following for Tigo S models The floating pick-up design gives precise ground following. Short crop plate Recommended for zero grazing. Spool valve control as standard The main functions of the Tigo S are actuated by means of a hydraulic valve control. Optional: electromagnetic comfort control All functions can be controlled via an exceptionally user-friendly control box in the tractor cab (suitable for load sensing!). The only loader wagon with a camless pick-up The new 1.80 m camless pick-up benefits from galvanising, ensuring protection from corrosive crop residues. The benefit of a camless pick-up is the vast reduction in the number of moving parts, meaning that the pick-up is maintenance free. The unit consists of five rows of spring tines which are positioned 54 mm apart to ensure unrivalled raking action, giving an even and gentle crop flow. The ability of the unit to float, combined with its pneumatic pick-up wheels, ensures precise ground contour following. Heavy-duty floor chains for quick unloading The floor chains, with their infinite speed control, operate almost without any noise. Two 10 mm chains, with a breaking strength of tonnes each, and robust carriers ensure that the wagon is unloaded quickly and safely. Ergonomic controls for relaxed and safe operation The main functions of the Tigo S are hydraulically controlled via spool valves which may be either cable or electromagnetic actuated. Floor chain (standard). Pick-up (standard). Tail gate (standard). Deflecting drawbar (optional). Superstructure (optional). 22

23 LELY TIGO Lely Tigo ST The Tigo ST has been specially designed for use on the steepest slopes. To cope with the special demands of alpine farmers, the Tigo ST was designed. T stands for Tieflader and refers to the especially low centre of gravity of this particular type of loader wagon. Wide track width low centre of gravity Thanks to their low centre of gravity and 2.12 m track width, the Tigo ST models are the ideal loader wagons for operating on steep slopes. Depending on the model, the loading floor height is approximately 25 cm to 40 cm lower than a standard model; this ensures sufficient stability when working on extremely steep slopes. 23

24 Lely Tigo 25 ST Classic The Lely Tigo 25 ST Classic has been specifically developed for farmers who operate on steep slopes or alpine meadows. Lely Tigo 35 S This high-performance machine has a five-swing-arm feed unit and foldable roughage superstructure. Lely Tigo 40 S This product will hold 24.5 DIN m 3. The enclosed all steel superstructure (optional) ensures excellent stability when used for silage. Lely Tigo 40 ST The newly developed low loader models are well balanced due to their wide track width, thus allowing users to work safely, even on steep slopes. 24

25 LELY TIGO Lely Tigo 50 ST The newly developed low loader models are well balanced due to their wide track width, thus allowing users to work safely, even on steep slopes. Lely Tigo 50 S The largest in the Tigo S class with 29 DIN m 3. Its loading volume and robust technology make this a particularly high-output harvesting machine. It can be delivered either with a roughage superstructure or an all-steel superstructure. Special equipment the S models can be selected with different options Hydraulic hitch drawbar For maintaining a level machine on uneven ground. Floor clearance up to 70 cm. Hydraulic roughage superstructure Can be folded directly from the tractor cab. Top limiting cover Secure retention even of short-cut crops due to the top limiting cover. Castor action pick-up guide wheels For optimum control when turning: the castor action pick-up guide wheels relieve the strain on the pick-up. Wind guard with short crop roller For optimum fodder flow, even when operating at higher speeds. Electromagnetic control Direct switching of all functions from the tractor cab via a control box (load sensing possible!). Wagon full alarm A sensor on the tail gate reports Wagon full via an alarm on the electrical control box. Standard on S Profi models. Hydraulic chopping unit The hydraulically lowered chopping unit ensures quick removal of fodder accumulations. 25

26 Lely Tigo MS The Lely Tigo MS has a load unit that handles green fodder, hay and silage extremely gently while the compact frame construction with a vertical superstructure allows for an enormous load volume and is designed for a permitted total weight of up to 14 tonnes. The discharge wagon models are ideally suited both for use in the silo and in operation with the side-discharge conveyor for daily feeding of green grass. The wide selection of tyres and running gear enables the Tigo MS to fulfil all of the demands of large and medium-sized professional agricultural enterprises. 26

27 LELY TIGO Optimum crop treatment The heart of the Tigo MS is the cam-track-steered load unit. Five robust feed forks ensure even and fast intake. The kidney-shaped cam track steers the rakes smoothly and gently into the load unit. The twin tines of the rakes maintain contact with the crop at an ideal angle until they are retracted shortly before the crop enters the loading wagon. The gentle action of the loading and cutting process results in high-quality forage. Unique gear drive The feed unit is powered by a heavy-duty gear drive. Its ability to absorb high loads ensures consistent and smooth running of the wagon. Each feed fork is mounted on two individual roller bearings. The central lubrication of all bearings is standard. The only swing-arm loader wagon with a camless pick-up The 1.80 m camless pick-up benefits from galvanising, ensuring protection from corrosive crop residues. The benefit of a camless pick-up is the vast reduction in the number of moving parts, meaning that the pick-up is maintenance free. The unit consists of five rows of spring tines which are positioned 54 mm apart to ensure unrivalled raking action, giving an even and gentle crop flow. The ability of the unit to float, combined with its pneumatic pick-up wheels, ensures precise ground contour following. Camless pick-up Five rows of non-steered tines spaced just 54 mm apart ensure an extremely clean crop pick-up across a working width of 1.80 m. Ground contour following for Tigo MS models The floating pick-up design gives precise ground following. 27

28 Perfect cutting quality All Tigo MS models can be fitted with a maximum of thirty-three knives arranged in two rows giving chop lengths down to 38 mm. The chopping length can be adjusted via a lever which selects the required number of knives (0/5/17/21/33). The knife shape ensures an even cutting action. Each knife is protected against foreign objects and can be changed without the need for special tools. A blockage can be easily removed by pivoting the chopping unit (hydraulic actuation optional). The chopping unit can be easily lowered for sharpening, and for more major maintenance jobs the unit can be placed on special service wheels. Heavy-duty floor for rapid discharge The hydraulic floor chain runs smoothly. It consists of two 10 mm chains, with a breaking strength of tonnes each, and robust carriers, which ensure that the wagon is unloaded quickly and safely. For extreme conditions fourchain strands with offset carriers can be supplied as an option in lieu. Electromagnetic control The standard electro-hydraulic control on the Tigo MS loader wagon enables all functions to be operated easily and directly from the tractor cab. ISOBUS control ISOBUS control is standard on MS D models, and is optional on the MS models available. ISOBUS control can be operated by means of the standard control or through the tractor terminal. Due to the interface with the loader wagon, all functions can be controlled by the joy-stick in the tractor cab, ensuring optimum ease of use. 28

29 LELY TIGO Large load volume: Tigo 60 & 70 MS The 60 MS (60 m³ at medium compaction) and 70 MS (70 m³ at medium compaction) models have been specially developed for farms that require large loading capacities for stalk material and have long distances to travel. They therefore achieve a high degree of economy and efficiency. Automatic stop-load A pressure switch in the hydraulic circuit of the tail gate (MS models) or a sensor on the lower discharge roller (MS D models) monitors the loading pressure and automatically switches off the floor chain to prevent overloading of the wagon. At the same time the driver hears an acoustic signal (buzzer in the control box) reporting that loading is complete. Heavy-duty floor for rapid discharge The hydraulic floor chain runs smoothly. It consists of two 10 mm chains, with a breaking strength of tonnes each, and robust carriers, which ensure that the wagon is unloaded quickly and safely. For extreme conditions four-chain strands with offset carriers can be supplied as an option in lieu. Parabolic suspension tandem chassis for optimum driving comfort The Lely Tigo MS and MR models have to hold the road well in any situation. Therefore, a parabolic suspension tandem assembly has been chosen. Thanks to this assembly, the Tigo can manage high speeds on the road and at the same time has excellent ground-contour-following qualities in the field. The equalising linkage with its large pendulum range ensures optimum ground alignment in the field and in silos, and also ensures that the load is distributed proportionally across the two axles. The heavy-duty leaf springs provide optimum driving comfort. Comfortable and stable running gear The robust tandem axle unit offers maximum comfort and stability. The wagon may be equipped, if required, with a 15-tonne running gear which can be fitted with 710/35 R 22.5 tyres in order to minimise turf damage. All vehicles can be equipped with a two-terminal compressed air system (four wheel braking system) with ALB (automatic load-dependent brakes). Foldable superstructure The Lely Tigo MS is available with a hydraulically foldable roughage superstructure. An ideal option for low clearances. Discharge conveyor The Lely Tigo MS D can also be fitted with an optional hydraulically driven side-discharge conveyor. This can be switched over to discharge to the left or right, and the belt width of 700 mm always ensures optimum transfer to the feeding area or fans. The side-discharge conveyor can be simply swung under the wagon bridge for use in the silo. Lely Tigo MS D with perfect discharge Tigo MS D automatic loading wagons are equipped as standard with two discharge rollers (optionally three). The discharge system distributes the forage evenly across the silo. All MS D models contain a floor chain with forward/reverse operation. The chain speed can be steplessly adjusted at the control box. A double wide-angle PTO shaft is standard. Hay-loading package Metal superstructure on top with hot galvanised steel C-profiles. 29

30 Lely Tigo MR The entry-level models of rotary loader wagons in the Tigo series are derived from the larger Tigo PR and XR wagons. By adopting selected main features of these giants, a new series of loader wagons has been created which offers higher capacity for progressive livestock farmers. The unique Tigo rotor ensures efficient chopping, loading and the camless pick up is extremely low maintenance. Increased loading volumes make these machines exceptionally economic. With the new compact design, offers Lely the user even more options. 30

31 LELY TIGO Optimum forage intake with five-bar pick-up The camless pick-up on the Tigo MR wagons has a working width of 1.80 m and has five non-steered tine bars with tines spaced 54 mm apart. This maintenance-free pick-up consistently delivers clean work due to the fine tuning of the pick-up rotational speed to that of the chopping rotor. Camless pick-up The 1.80 m pick-up consists of five rows of spring tines which are spaced 54 mm apart, giving unrivalled crop-handling ability. Chopping quality The Tigo MR chopping unit can be operated in two groups and can be fitted with thirty-one knives. This results in a minimum chopping length of 45 mm. The wide edges of the rotor tines together with these knives provide a highly precise chopping action. The knives are individually protected with the Trimatic knife-protection system. Unique in its class: gear-driven rotor The chopping rotor of the Tigo MR model is driven by extra-heavyduty gears, which enable fluctuating loads to be handled with optimal efficiency. The direct-driven rotor of the Tigo MR stands out due to its smooth running and unparalleled durability. 25 mm 45 mm Rotor drive The main drive of the Tigo MR is via heavy duty spur gears. 31

32 Tigo MR Profi with Multi-function tiltable bulkhead Another completely unique feature of the Tigo MR Profi models, is the forwardly inclined superstructure with a hydraulically tiltable bulkhead. This provides 6 m³ of additional loading capacity above the feed unit. It also improves the load on the drawbar to ensure absolute stability, even when huge amounts of crop are transported. Furthermore, the compaction pressure can be easily adjusted by moving the wall further forwards or back, and the wagon can be easily and cleanly emptied. 32

33 LELY TIGO Multi-function bulkhead Absolutely unique is the new bulkhead construction on the Tigo MR. The hydraulically adjustable bulkhead can be tilted forwards and backwards by approximately 80 degrees to fulfill various functions: an automatic loading system and a compaction system for variable compaction of the crop mass in the wagon, and discharge assistance for complete emptying of the wagon. When the bulkhead is tilted forwards by approximately 65 degrees it makes way for 6 m³ (DIN) of additional loading space. The intelligent software of the wagon automatically adjusts the different loading and unloading positions. High volume, yet compact! When the wagon is full the Tigo MR plays its trump card: the bulkhead tilts forwards in two stages to the transport position, providing 6 m³ of additional loading space. The result: due to this additional volume, the wagon can be one metre shorter with inclined loading volumes. Weight distribution is also significantly more advantageous. During harvesting, the front wall is always inclined forwards in order to allow a clear view into the wagon. Easy adjustment of compaction pressure When the automatic loading system is activated, the multi-function bulkhead is automatically put into the vertical position (loading position). The degree of compaction can be pre-selected from two options on the control unit, depending on the crop. Forward tilting reduces the pressure while backward tilting increases it. Sensors on the hydraulic cylinders of the bulkhead measure the degree of compaction and automatically activate the floor chains. A safe start for discharge When the automatic discharge is started up, the multi-function bulkhead and the floor chains are simultaneously activated. This unique additional feature guarantees that the crop mass is set in motion safely. The bulkhead gently pushes the forage, thereby reducing the strain on the floor chain. Optimum discharge During discharge the multi-function bulkhead automatically tilts right back to an angle that is ideal for pushing the forage smoothly and efficiently over the hydraulically operated floor. The result is a cleanly emptied wagon. 33

34 Heavy-duty floor for rapid discharge The hydraulic floor chain runs smoothly. It consists of two 10 mm chains, with a breaking strength of tonnes each, and robust carriers, which ensure that the wagon is unloaded quickly and safely. For extreme conditions four-chain strands with offset carriers can be supplied as an option in lieu. Parabolic suspension tandem chassis for optimum driving comfort The Lely Tigo MR models have to hold the road well in any situation. Therefore, a parabolic suspension tandem assembly has been chosen. Thanks to this assembly, the Tigo can manage high speeds on the road and at the same time has excellent ground-contour-following qualities in the field. The equalising linkage with its large pendulum range ensures optimum ground alignment in the field and in silos, and also ensures that the load is distributed proportionally across the two axles. The heavy-duty springs provide optimum driving comfort. Comfortable and stable running gear The robust tandem axle unit offers maximum comfort and stability. The wagon may be equipped, if required, with a 16-tonne running gear which can be fitted with 710/40 R22.5 tyres in order to minimise turf damage. All vehicles can be equipped with a two-terminal compressed air system (four wheel braking system) with ALB (automatic load-dependent brakes). Automatic loading system (optional equipment) The automatic loading system for the Lely Tigo MR and MR D ensures optimum loading of the wagon so that each journey made is as efficient as possible. The chopping rotor thrusts the crop upwards until a sensor in the roof is activated. Next, the floor shifts the load by a small amount at a time towards the back of the wagon until a second sensor at the tail gate detects that the maximum load has been taken on board and reports Wagon full. At the same time, the driver will receive an acoustic signal from their operator unit. Electromagnetic control The standard electro-hydraulic control on the Tigo MR loader wagon enables all functions to be operated easily directly from the tractor cab. ISOBUS control ISOBUS control is standard delivered on the MR D and MR Profi models, and is optional on the MR models available. ISOBUS control can be operated by means of the standard control or through the tractor terminal. Due to the interface with the loader wagon, all functions can be controlled by the joy-stick in the tractor cab, which means optimal ease of use. 34

35 LELY TIGO Lely Tigo MR D perfect discharging Every Tigo MR loader wagon is available as an MR D model with two or three discharge rollers. This discharge system spreads the forage evenly across the silo. All MR D models have a floor forward feed and reversing feed function and are equipped with a double wide angle PTO shaft. Optional side-discharge conveyor If required, the Tigo MR D can also be fitted with a hydraulically driven side-discharge conveyor (optional equipment). This can be switched over to discharge to the left or right, and the belt width of 700 mm always ensures optimum transfer to the feeding area or fans. 35

36 Lely Tigo 45 R(D) Profi Large livestock farmers and contractors must be able to depend on high capacity and reliability if large quantities of forage are to be harvested. The Lely Tigo R Profi range of loader wagons was developed with this in mind. Speed and efficiency characterise these R Profi models, in which unequalled chopping quality provides the best forage. Optimum intake with seven-row pick-up The camless pick-up on the Tigo 45 R(D) Profi models have seven tine bars with tines spaced 54 mm apart. This maintenance-free pick-up consistently delivers clean work due to the fine tuning of the pick-up rotational speed relative to that of the chopping rotor. Pivotable chopping unit The knives are easily accessible. Optionally the chopping unit can be pivoted to the side. Perfect chopping quality The Tigo 45 R(D) Profi chopping unit can be operated in two groups and is fitted with forty knives. This results in a minimum chopping length of 37 mm. The 25 mm wide edges of the rotor tines and the resulting narrow chopping gap provide a highly precise chopping action. The knives are individually protected with the Trimatic knife-protection system. Maintenance-free drive with oil bath The rotor is directly driven via an oil-immersed drive. Direct drive means optimum transmission of power from the tractor to the loader wagon. A cam type clutch protects the drive line against overloads. This maintenance-free drive ensures many years of service at minimal cost. Robust steel structure The body is equipped with ropes on top to restrict the load bay and to prevent spillage. The straight sides contribute to a rapid unloading action and prevent bridging. ISOBUS control The Lely Tigo 45 R(D) Profi is equipped as standard with an ISOBUS on-board computer that can be controlled with the control unit and the tractor terminal. 36

37 LELY TIGO Automatic loading system The automatic loading system ensures optimum loading of the wagon so that each journey made is as efficient as possible. The chopping rotor thrusts the crop upwards until a sensor in the roof is activated. The floor then shifts the load by a small amount at a time towards the rear, where a second sensor at the tail gate detects that the maximum load has been taken on board and reports Wagon full. At the same time, the driver will receive an acoustic and optical signal from their operator unit. Lely Tigo MR D Profi Every Tigo MR Profi loader wagon is available as an MR D model with two or three discharge rollers. This discharge system spreads the forage evenly across the silo. The MR D wagon range can also be equipped with a hydraulically driven side-discharge conveyor (optional) allowing forage to be discharged to the left- or right-hand side of the machine. A 700 belt width ensures optimum transfer to the feeding area remove or fans. All MR D models have a floor forward feed and reversing feed function and are equipped with a double wide-angle PTO shaft as standard. Heavy-duty floor for rapid discharge Four high-grade annealed chains, 10 mm in diameter with an overall breaking strength of 50 tonnes, and offset carriers ensure reliable loading and discharge action. A two-stage hydraulic motor with a rapid motion option is a standard feature on all Lely Tigo R Profi models. High-performance chassis These loader wagons are equipped as standard with a tandem bogie axle unit. The enormous suspension travel ensures even load distribution as well as optimum ground contour flotation. These Loader wagons can be fitted with tyres up to 710/35 R

38 Technical specifications Volume (DIN) (m³) Capacity (medium compaction)* (m³) Maximum permissible weight (kg) Feed unit Number of swing arms Number of tine rows per rotor Maximum number of knives Minimum chop length (mm) Working width pick-up (DIN) (m) Number of tine bars per pick-up S 35S Classic ,800 Swing arms 3 X S ,200 Swing arms 5 X S ,000/11,000 Swing arms 5 X S ,000/11,000 Swing arms 5 X ST 25ST Classic ,800/6,200 Swing arms 3 X ST Classic ,800 Swing arms 3 X ST ,200 Swing arms 5 X ST ,000/10,000 Swing arms 5 X ST ,000/10,000 Swing arms 5 X MS MS ,000/15,000 Swing arms 5 X MS ,000/15,000 Swing arms 5 X MS ,000/15,000 Swing arms 5 X MS ,000/15,000 Swing arms 5 X MS D MS 40 D 25.7/28.7*** 40 12,000/15,000 Swing arms 5 X MS 50 D 28.7/31.7*** 50 12,000/15,000 Swing arms 5 X MR MR ,000/17,000 Rotor X MR ,000/17,000 Rotor X MR ,000/17,000 Rotor X MR D MR 40 D 25.7/28.7*** 40 12,000/17,000 Rotor X MR 50 D 28.7/31.7*** 50 12,000/17,000 Rotor X MR 60 D 33.8/36.8*** 60 12,000/17,000 Rotor X MR Profi MR 50 Profi ,000/17,000 Rotor X MR 60 Profi ,000/17,000 Rotor X MR Profi D MR 50 Profi D 30.7/ ,000/17,000 Rotor X MR 60 Profi D 33.7/ ,000/17,000 Rotor X R/ RD Profi 45 R Profi ,000 Rotor X RD Profi 28.8/31.8*** 50 17,000 Rotor X S = Standard / O = Optional / X = Not available on this machine

39 LELY TIGO Tine spacing on pick-up (mm) Ground clearance of pick-up (m) Empty weight (approximate) (kg) Maximum weight on drawbar (kg) Standard transport width (m) Transport length (m) Maximum transport height** (m) Min. Transport height folded (m) Loading deck height** (m) Loading area width (m) Loading area length (m) Track width (m) Standard tyres Maximum speed (km/h) PTO speed (rpm) Number of metering rollers Transport height folded (Hydro)** (m) ,690 1, , / / ,790 1, , , / / PR ,550 1, , / / PR ,850 1, ,70 3, / / PR ,400 1, , , / ,610 1, , , / ,700 1, , , / PR ,280 1, ,05 2,05 0, / PR ,580 1, ,70 3,05 2,05 0, / PR ,200 2, / PR ,170 2, / PR ,380 2, / PR ,980 2, / PR ,700 2, / PR ,630 2, / PR ,400 2, / / PR 40 1, ,370 2, / / PR 40 1, ,580 2, / / PR 40 1, ,900 2, / / PR 40 1, ,830 2, / / PR 40 1, ,950 2, / / PR 40 1, ,400 2, / / PR 40 1, ,370 2, / / PR 40 1, ,900 2, / / PR 40 1, ,830 2, / / PR 40 1, ,480 2, / , ,940 2, / , * Depending on crop conditions / ** With standard tyres / *** Without discharge rollers fitted 39

40 LELY TIGO Drive load deck (Tractor hydraulics) Electro-hydraulic comfort control Cross conveyor belt ISOBUS Control Load sensing-ready Two-speed hydraulic floor drive Two-stage automatic loading system Loading area cover Weighing system 14-tonne tandem, twist beam suspended 16-(15 MS, 17MR)-tonne tandem, twist beam suspended 20-tonne bogie tandem 22.50" 23-tonne bogie tandem 26.50" 23-tonne hydraulic leveling tandem 26.50" 23-tonne hydro-pneumatic tandem 26.50" 30-tonne hydro-pneumatic tridem Trailed steering tandem Forced steering tandem Hydraulic operable knife bar Automatic load-dependent air brakes Axle track width 1.80 m S O - - O - - X X O O O S O - - O - - X X O O O S O - - O - - X X O O O S O - - O - - X X O O O S O - - O - - X X O S O - - O - - X X O X O S O - - O - - X X O X O S O - - O - - X X O X O S O - - O - - X X O X O S - X O O O O X X X X X X X X X O X O S O S - X O O O O X X X X X X X X X O X O S O S - X O O O O X X X X X X X X X O X O S O S - X O O O O X X X X X X X X X O X O S O S - O S O O O X X X X X X X X X O X O S O S - O S O O O X X X X X X X X X O X O S O S - X O O O O X X X O X X X X X O X S S S S - X O O O O X X X O X X X X X O X S S S S - X O O O O X X X O X X X X X O X S S S S - O S O O O X X X O X X X X X O X S S S S - O S O O O X X X O X X X X X O X S S S S - O S O O O X X X O X X X X X O X S S S S - X O O O S X X X O X X X X X O X S S X S - X O O O S X X X O X X X X X O X S S X S - O S O O S X X X O X X X X X O X S S X S - O S O O S X X X O X X X X X O X S S X S - X S O O S X X - S X X X X X O X - - S S - O S O O S X X - S X X X X X O X - - S 40

41 Tyres Tyres 505/50-17 Tyres 500/ PR Tyres 500/ PR Tyres 560/45 R22.5 D152 Tyres 620/40 R22.5 D148 Tyres 15.0/ ply Tyres 19.0/ ply Tyres 500/ ply Tyres 505/50-17 Tyres 600/ Tyres 650/50 R22.5 Tyres 710/ Tyres 710/40 R22.5 Tyres 710/50 R26.5 Tyres 800/45 R26.5 Air brake system Hydraulic brake system S 35S Classic X S O O O S O 35S X S O O O S O 40S X S O O O S O 50S X S O O O S O ST 25ST Classic ST Classic S O X X S O 35ST S O X X S O 40ST S O X X S O 50ST S O X X S O MS MS 40 O O O O O X S S O X X X X X X S O MS 50 O O O O O X S S O X X X X X X S O MS 60 O O O O O X S S O X X X X X X S O MS 70 O O O O O X S S O X X X X X X S O MS D MS 40 D O O O O O X S S O X X X X X X S O MS 50 D O O O O O X S S O X X X X X X S O MR MR 40 O O O O O - - S O X X X X X X S O MR 50 O O O O O - - S O X X X X X X S O MR 60 O O O O O - - S O X X X X X X S O MR D MR 40 D O O O O O - - S O X X X X X X S O MR 50 D O O O O O - - S O X X X X X X S O MR 60 D O O O O O - - S O X X X X X X S O MR Profi MR 50 Profi O O O O O - - S O X X X X X X S O MR 60 Profi O O O O O - - S O X X X X X X S O MR Profi D MR 50 Profi D O O O O O - - S O X X X X X X S O MR 60 Profi D O O O O O - - S O X X X X X X S O R/ RD Profi 45 R Profi - S O O O X X X X X X S O 45 RD Profi - S O O O X X X X X X S O S = Standard / O =Optional / X = Not available on this machine Lely reserves the right to select the tyre manufacturer. AW 11.5/ / / /50-17 AS 15.0/ /45-17 Flotation + 380/ / / /55-20 Flotation Pro 560/45 R /40 R /40 R22.5 Country King 710/35 R22.5

42 Passionate about farming Lely has a long and deep history of recognizing the needs of modern farmers. Our products are developed with the cow as starting point. We strive to let her excel and as such, we supply products to farmers and contractors ranging from forage harvesting, to feeding, housing, caring, milking and energy sourcing. In addition we boast specific knowledge and experience in facilitating farmers to get the best out of their equipment. As such our in-depth knowledge of the complete farm cycle from grass to glass is unrivalled in the agricultural business. We are committed to a sustainable, profitable and enjoyable future in farming. Lely really cares for the environment. Your Lely distributor LHQ.B05015.EN.A Lely, Astronaut, Astri, Atlantis, Attis, AWS, C4C,Calm, Caltive, Capsule, Commodus, Compedes, Cosmix, Discovery, F4C, Fertiliner, Gravitor, Grazeway, Hibiscus, Hubble, I-flow, InHerd, Juno, L4C, Lely Center, Lelywash, Lotus, Luna, Nautilus, Orbiter, Quaress, Qwes, SAE, Shuttle, Splendimo, Storm, T4C, Tigo, Vector, Viseo, Voyager, Walkway and Welger are registered trademarks of the Lely Group. Lely reserves all rights with respect to its trademarks. Any unauthorized use of any Lely-owned trademark or any use of a trademark that is confusingly similar to, or likely to cause confusion with a Lely-owned trademark, would constitute infringement of Lely s exclusive rights. All rights reserved. The information given in this publication is provided for information purposes only and does not constitute an offer for sale. Certain products may not be available in individual countries and products supplied may differ from those illustrated. No part of this publication may be copied or published by means of printing, photocopying, microfilm or any other process whatsoever without prior permission in writing by Lely Holding S.à r.l. Although the contents of this publication have been compiled with the greatest possible care, Lely cannot accept liability for any damage that might arise from errors or omissions in this publication. Live Life Lely

LELY TIGO Loader wagons

LELY TIGO Loader wagons Loader wagons Insights on chopping Chop for efficient rumination. Chop for efficient rumination Chopping leads to higher density. Sharp knifes make a difference. CUTTING DRYING COLLECTING CHOPPING COMPACTING

More information

FARO 5010 FARO 4010 COMBILINE

FARO 5010 FARO 4010 COMBILINE NEW FARO 5010 FARO 4010 COMBILINE Multipurpose loader wagon with rotor 97+390.en.0814 Find out more online Versatile and productive With the new FARO 5010 and FARO 4010 COMBILINE, PÖTTINGER offers you

More information

Rotex 402/ / /550. Rotor Loader Wagons

Rotex 402/ / /550. Rotor Loader Wagons Rotex 402/400-452/450-552/550 Rotor Loader Wagons Rotex 552-550 Load Capacity to DIN 11741: 32.4m³ - 35.6m³ Load Capacity, medium compression: 51m³/56m³ Maximum Weight: 20,000kg Maximum Payload: 12,700kg

More information

LELY LOTUS Tedders. innovators in agriculture

LELY LOTUS Tedders.  innovators in agriculture LELY LOTUS Tedders www.lely.com innovators in agriculture Rapid wilting retains the quality CUTTING DRYING COLLECTING Cut the grass your animals need. Ash is ballast for animals. Feed efficiency and our

More information

Fendt Tigo MR Profi, MR and MS

Fendt Tigo MR Profi, MR and MS Fendt Tigo MR Profi, MR and MS TIGO 50 MR Profi TIGO 60 MR Profi Volumes in accordance with DIN 11741 31 m³ 36 m³ Permissible overall weight 12.000/17.000 kg 12.000/17.000 kg Flexible. Compact. Tenacious.

More information

Forage wagon. Giga-Vitesse CFS

Forage wagon. Giga-Vitesse CFS Forage wagon Giga-Vitesse CFS 2 Focus on performance The market sector for high-performance silage trailers is facing increasing demands for higher efficiency to compete with self-propelled forage harvesters.

More information

LINER TWIN 750 TWIN. Taking raking into a whole new dimension.

LINER TWIN 750 TWIN. Taking raking into a whole new dimension. LINER 4000 2900 2800 2700 2600 1750 1650 TWIN 750 TWIN Taking raking into a whole new dimension. Everything turning... Contents LINER 4000...16 40.0-49.2 ft (12.20 m 15.00 m) LINER 2900...18 26.3-29.5

More information

Ash is ballast for animals

Ash is ballast for animals Rakes Insights on collecting Ash is ballast for animals. Ash is ballast for animals Securing forage quality ensures better return. Prepare the next step. CUTTING DRYING COLLECTING CHOPPING COMPACTING SEALING

More information

TULIP MULTIDISC - Australia Disc Harrow

TULIP MULTIDISC - Australia Disc Harrow - Australia Disc Harrow www.lely.com innovators in agriculture Tulip Multidisc Standard The Tulip Multidisc standard series feature 510mm diameter discs and an 800mm clearance between the two disc gangs

More information

Horizontal chopper. The maize pickers. Superb operation.

Horizontal chopper. The maize pickers. Superb operation. The maize pickers. Horizontal chopper. CLAAS combines also turn in a perfect maize harvesting performance when equipped with the CONSPEED and CONSPEED LINEAR maize pickers which are available as 6, 8 and

More information

Forage wagon Fendt Tigo

Forage wagon Fendt Tigo Forage wagon Fendt Tigo Flexible. Compact. Tenacious. Fendt Tigo (PR/XR). 2 Highest feed quality. Enormous loading space. Quick unloading. The forage wagon Fendt Tigo PR and XR will fulfil these wishes

More information

Self-loading forage wagons PONY / BOSS / PROFI-GP

Self-loading forage wagons PONY / BOSS / PROFI-GP Self-loading forage wagons PONY / BOSS / PROFI-GP ... at lowest cost High speed from field to farm... PONY page 10 to 11 It is harvest time and you need to bring in the best quality crop. High quality

More information

SELF-LOADING MIXER FEEDERS SELF-LOADING MIXER FEEDERS. Triomix Triomix S Gigant Vertifeed. Trioliet. Invents for you.

SELF-LOADING MIXER FEEDERS SELF-LOADING MIXER FEEDERS. Triomix Triomix S Gigant Vertifeed. Trioliet. Invents for you. SELF-LOADING MIXER FEEDERS SELF-LOADING MIXER FEEDERS Triomix Triomix S Gigant Vertifeed Trioliet. Invents for you. Farmer, tractor and Trioliet self-loading technology: economically the perfect trio With

More information

Multi-purpose forage wagon. Giga-Vitesse CFS

Multi-purpose forage wagon. Giga-Vitesse CFS Giga-Vitesse CFS Gigantic and powerful The Strautmann Giga-Vitesse CFS Giga-Vitesse CFS Large loading capacity and particularly easy towing due to the unique Continuous Flow system (CFS) Loading capacity

More information

Rotex Combi, T-Rex, T-Rex Shuttle, Duplex. Loader and Silage Wagons, Silage Spreaders

Rotex Combi, T-Rex, T-Rex Shuttle, Duplex. Loader and Silage Wagons, Silage Spreaders Rotex Combi, T-Rex, T-Rex Shuttle, Duplex Loader and Silage Wagons, Silage Spreaders A Brand New Range with Long Experience Strong Product Range Being a high profi le grass specialist, Vicon offers dedicated

More information

Tedders. Highest output due to unique hooktines. innovators in agriculture

Tedders. Highest output due to unique hooktines.   innovators in agriculture Lely lotus Tedders Highest output due to unique hooktines www.lely.com innovators in agriculture Grip on the crop More than just a protection guard... All guards are substantially connected by means of

More information

Royal. Royal Silage Trailer

Royal. Royal Silage Trailer Silage Trailer Enormous pickup, dependable cutting precision, top power saving The BERGMANN offers system engineering which has been adapted for professional agricultural operations and farm contractors.

More information

Rapid wilting retains the quality

Rapid wilting retains the quality Tedders Insights on drying Rapid wilting retains the quality. Rapid wilting retains the quality Dry matter content is decisive for optimum conservation. Treat your forage gently. CUTTING DRYING COLLECTING

More information

TE TE4000/TE4500/TE6000/

TE TE4000/TE4500/TE6000/ KUBOTA Rotary Tedders TE TE4000/TE4500/TE6000/ TE6500/TE8500/TE10000 Rotary tedders with working widths from 4.6 to 13.3m 2 SPEED UP YOUR DRY ING PROCESS A tedder for any demand Kubota has an extensive

More information

DMC U B O TA M O W E R C O N D I T I O N E R S DMC8000/DMC8500

DMC U B O TA M O W E R C O N D I T I O N E R S DMC8000/DMC8500 K U B O TA M O W E R C O N D I T I O N E R S 8000/8500 Trailed mower conditioners ranging from 9 2 (2.80m) to 13 1 (4.0m) with left hand or center pivot drawbar options DESIGNED TO OFFER Y PROTECTING YOUR

More information

MX Self-loading /unloading forage wagons

MX Self-loading /unloading forage wagons MX Self-loading /unloading forage wagons MX www.krone.de KRONE MX Easy loading Camless EasyFlow pick-up Massive cut-and-feed rotor with wide Hardox plated tines Scissor-like cuts with up to 41 knives Knife

More information

Trailed Forage Harvesters FCT 1355

Trailed Forage Harvesters FCT 1355 Trailed Forage Harvesters FCT 1355 Precision chopping - why? The grass sap and possible additives will be evenly distributed on all surfaces. The process of ensiling starts earlier and the quality will

More information

DEUTZ-FAHR BIGMASTER Series BIGMASTER

DEUTZ-FAHR BIGMASTER Series BIGMASTER DEUTZ-FAHR BIGMASTER Series BIGMASTER ULTIMATE FIELD PERFORMANCE, MAXIMUM OUTPUT CAPACITY Our goal is to develop machines that will give a boost to the profi tability of your company. High output is a

More information

RX Self-loading and harvesterfi lled forage wagons

RX Self-loading and harvesterfi lled forage wagons RX Self-loading and harvesterfi lled forage wagons 2 RX Self-loading and harvester-filled forage wagons RX Self-loading and harvester-filled forage wagons One machine two ways of filling Exceptionally

More information

COMPACT DISC HARROW HELIODOR 9

COMPACT DISC HARROW HELIODOR 9 COMPACT DISC HARROW HELIODOR 9 2 Versatility is the trump card Compact disc harrows have revolutionised modern agriculture for more than ten years now. No other soil cultivation implement combines a comparable

More information

Forage harvesting with system.

Forage harvesting with system. VOLTO Widespread. Forage harvesting with system. Every minute counts during forage harvesting. It is great if you have a partner who offers far more than just robust equipment. Exceptional product quality

More information

TURBOBUSTER TURBOBUSTER. Trioliet: Invents for you. TU 115 TU 145 TU 170 TU 195 TU 180 XL

TURBOBUSTER TURBOBUSTER. Trioliet: Invents for you. TU 115 TU 145 TU 170 TU 195 TU 180 XL TURBOBUSTER TURBOBUSTER TU 115 TU 145 TU 170 TU 195 TU 180 XL Trioliet: Invents for you. Turbobuster Silage block cutter Still the best after 30 years Silage block cutters have become a common sight on

More information

Verti-Mix self-propelled wagon. Verti-Mix SF Verti-Mix Double SF

Verti-Mix self-propelled wagon. Verti-Mix SF Verti-Mix Double SF Verti-Mix SF Verti-Mix Double SF Quick loading by means of high-performance milling cutter Clean picking-up to the exact kilogramme via reversible elevator conveyor The self-propelled wagon: Powerful,

More information

EXTRΔ H-432H-440H. Mounted Plain Disc Mowers

EXTRΔ H-432H-440H. Mounted Plain Disc Mowers EXTRΔ 228-232-428H-432H-440H Mounted Plain Disc Mowers Cutting Performance in New Dimensions Low Noise Cutterbar The newly developed EXTR cutterbar is designed for low maintenance and offers a very quiet

More information

DST ,50 clearance, height (m) Optional ,80 Scraper floor chain: 4 chains each

DST ,50 clearance, height (m) Optional ,80 Scraper floor chain: 4 chains each Specifications DST 20 DST 24 DST 29 DST 32 TYPE DST 12 T DST 16 T DST 22 DST-A 34 DST-A 20 DST-A 24 DST-A 29 DST-A 32 Permitted gross weight (t) 12 16 20 23 24 31 33 34 Trailer body dimensions (m) Length

More information

Triple set. GXT range, working width 40 (12.3 m)

Triple set. GXT range, working width 40 (12.3 m) Triple set GXT range, working width 40 (12.3 m) Cutter bar GXT Large working widths increase the efficiency The greatest possible efficiency is dependent on large working widths. Large working widths therefore

More information

AX Self-loading and forager-fi lled forage wagons

AX Self-loading and forager-fi lled forage wagons AX Self-loading and forager-fi lled forage wagons 2 AX 11/2017 AX Self-loading and forager-filled forage wagons Fully-featured multi-purpose forage wagon Collapsible, steel or silage extensions Massive

More information

The Fendt Twister tedder

The Fendt Twister tedder The Fendt tedder A century of silage expertise Tradition, innovation and passion that s the recipe for success of the silage centre of expertise in Feucht. 360 sophistication. The Fendt tedder. Thanks

More information

Fendt Former Hay Rake

Fendt Former Hay Rake Fendt Hay Rake A century of silage expertise Tradition, innovation and passion that s the recipe for success of the silage centre of expertise in Feucht. Tidy work. The Fendt Hay Rake. Do you expect nothing

More information

Conveyor belt wagon. Aperion

Conveyor belt wagon. Aperion Aperion Infinitely versatile The Strautmann conveyor belt wagon Optional extensions for increased transport capacity Robust plastic side panels for gentle transport The Strautmann Aperion derived from

More information

DM1000/DM2000/DM3000/ DM3300/DM4000 Mounted plain disc mowers with a working width from m

DM1000/DM2000/DM3000/ DM3300/DM4000 Mounted plain disc mowers with a working width from m DM1000/DM2000/DM3000/ DISC MOWERS DM3300/DM4000 DMKUBOTA Mounted plain disc mowers with a working width from 1.7-9.5m 2 LETS YOU FOCUS ON WHAT IS IMPORTANT All Kubota disc mowers are built for performance

More information

Front loader Fendt CARGO

Front loader Fendt CARGO Front loader Fendt CARGO An unbeatable combination Fendt Vario with Fendt CARGO The new Fendt front loader Fendt CARGO offers sophisticated technology for maximum productivity. It expands the Fendt product

More information

Rotex Duplex 400. Rotor Loader Wagons and Silage Spreaders

Rotex Duplex 400. Rotor Loader Wagons and Silage Spreaders Rotex 400-450-550 Duplex 400 Rotor Loader Wagons and Silage Spreaders 2 VICON VICON 3 KEEP YOUR SYSTEM RUNNING Working the land, running my farm and connecting with nature. Farming is my way of living,

More information

RX Self-loading and harvesterfilled

RX Self-loading and harvesterfilled RX Self-loading and harvesterfilled forage wagons 2 RX Self-loading and harvester-filled forage wagons RX self-loading and harvesterfilled forage wagons Full-featured dual-purpose forage wagon Exceptionally

More information

Verti-Mix self-propelled wagon. Verti-Mix SF Verti-Mix Double SF

Verti-Mix self-propelled wagon. Verti-Mix SF Verti-Mix Double SF Verti-Mix SF Verti-Mix Double SF Quick loading by means of high-performance milling cutter ICS-control intelligent steering of entire vehicle Clean picking-up to the exact kilogramme via reversible elevator

More information

MX Self-loading /unloading forage wagons

MX Self-loading /unloading forage wagons MX Self-loading /unloading forage wagons www.krone.de KRONE MX Easy loading Camless EasyFlow pick-up Massive cut-and-feed rotor with wide Hardox plated tines Scissor-like cuts with up to 41 knives Knife

More information

SOLOMIX 2 SOLOMIX 2. Mixer feeder wagons model Trioliet. Invents for you.

SOLOMIX 2 SOLOMIX 2. Mixer feeder wagons model Trioliet. Invents for you. SOLOMIX 2 SOLOMIX 2 Mixer feeder wagons model 1000-3200 Trioliet. Invents for you. Trioliet feeding technology since 1950 Feeding with perfect precision Trioliet was established by the three Liet brothers

More information

LB LB Big Square Balers

LB LB Big Square Balers LB 1270 - LB 1290 Big Square Balers Specialists in the Art of Baling 2 Leader in baling technology The ability to produce top quality bales in all crop conditions sets Vicon LB balers apart from all others.

More information

Pneumatic fertiliser spreader

Pneumatic fertiliser spreader Working width up to 36 m Pneumatic fertiliser spreader + + + ISOBUS + + + Section Control + + + Distance Control + + + FreeLane + + + Future-proof and precise fertilising technology Increased profitability

More information

Front loader. Fendt CARGO

Front loader. Fendt CARGO Front loader Fendt CARGO 1 2 The Fendt CARGO front loader 3 The combination is unbeatable The Fendt front loader Fendt CARGO offers sophisticated technology for maximum productivity. As a reliable universal

More information

EXTRΔ Mounted Plain Disc Mowers

EXTRΔ Mounted Plain Disc Mowers EXTRΔ 117-122-124-228-232 Mounted Plain Disc Mowers Cutting Performance in New Dimensions Fully welded cutterbar for a very strong construction. Even number of contra-rotating discs for improved overlap.

More information

SE SE8000 SERIES. Choppers for all needs and working conditions

SE SE8000 SERIES. Choppers for all needs and working conditions SE KUBOTA CHOPPERS SE1000 - SE8000 SERIES Choppers for all needs and working conditions 2 VERSATILE, RELIABLE , EFFICIENT! CHOPPERS FOR ALL CONDITIONS The hallmark of Kubota grass and straw choppers is

More information

ROLABAR RAKES 57 I 256 I 258 I 260 I 216

ROLABAR RAKES 57 I 256 I 258 I 260 I 216 ROLABAR RAKES 57 I 256 I 258 I 260 I 216 02 ROLABAR RAKE HERITAGE AND PERFORMANCE Pick up more of your valuable hay. Proven raking for 50 years and counting When something works well, it lives on! New

More information

COMPACT TRACK LOADERS PRODUCT RANGE

COMPACT TRACK LOADERS PRODUCT RANGE COMPACT TRACK LOADERS PRODUCT RANGE TEREX COMPACT TRACK LOADERS WILD THINGS FAST, POWERFUL, VERSATILE. Terex compact track loaders (CTL s) excel due to the many ways in which they can be used on the widest

More information

LARGE SQUARE BALERS LB434XL & LB434RXL LB434XL & LB434RXL

LARGE SQUARE BALERS LB434XL & LB434RXL LB434XL & LB434RXL LARGE SQUARE BALERS LB434XL & LB434RXL LB434XL & LB434RXL LARGE SQUARE BALERS HIGH-EFFICIENCY HAY PRODUCTION: MAKE THE MOST OF SHORT BALING WINDOWS. From the 31.5-inch longer bale chambers to the rugged

More information

AGRONIC. Slurry tankers

AGRONIC. Slurry tankers Technical data: Volume 11 m 14m 17m 20m 20m 25m 3 3 3 3 3 3 2 axles 3 axles Height to top of tank 253 cm 278 287 300 300 300 Length 670 806 848 866 920 1000 Width 288 288 299 308 313 313 Weight 4050 4150

More information

Front loader Fendt CARGO

Front loader Fendt CARGO Front loader Fendt CARGO An unbeatable combination Fendt Vario with Fendt Cargo The Fendt front loader Fendt CARGO offers sophisticated technology for maximum productivity. As a reliable universal implement,

More information

SOLOMIX 2 SOLOMIX 2. Mixer feeder wagons models Trioliet. Invents for you.

SOLOMIX 2 SOLOMIX 2. Mixer feeder wagons models Trioliet. Invents for you. SOLOMIX 2 SOLOMIX 2 Mixer feeder wagons models 1000-3200 Trioliet. Invents for you. Trioliet feeding technology since 1950 Feeding with perfect precision Trioliet was established by the three Liet brothers

More information

Dual-purpose wagons CARGOS

Dual-purpose wagons CARGOS Dual-purpose wagons CARGOS 8500 8400 8300 The new CARGOS. 2 Contents Technology 4 EFFICIENT FEEDING SYSTEM 6 AQUA NON STOP COMFORT 12 Loading 14 Discharging 16 Conversion to a forage transport wagon 18

More information

MOWERS, TEDDERS AND RAKES

MOWERS, TEDDERS AND RAKES MOWERS, TEDDERS AND RAKES 02 FRONT MOUNTED MOWERS DiscCutter F and DuraDisc F front mounted disc mowers. The New Holland range of front mounted disc mowers is available in two distinct variants. The DiscCutter

More information

PO Box 6 Centralia MO McHale Dealer Price Book

PO Box 6 Centralia MO McHale Dealer Price Book PO Box 6 Centralia MO 65240 886-682-5514 www.showmeshortline.com McHale Dealer Price Book BALE WRAPPERS 991LB QBW10002 $20,083.00 Quick Fit 750 mm Film Dispensers 2 Film Roll Holders, Bale Support Bobbins

More information

HP MF4600. Proven power and efficiency

HP MF4600. Proven power and efficiency 80-100 HP MF4600 Proven power and efficiency 2 3 Big engine muscle from just 3-cylinders Torque is the key to an engine s ability to work. Torque turns the gears in the transmission. Torque digs your tyres

More information

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders H A Y M A K I N G A T I T S B E S T! GF KUHN GYROTEDDERS Strong features that lead to quality tedding The rotors of all 102 and

More information

PH SERIES PH1000F-2000F SERIES. Heavy-duty rigid and foldable power harrows

PH SERIES PH1000F-2000F SERIES. Heavy-duty rigid and foldable power harrows KUBOTA PH POWER HARROWS PH1000-3000 SERIES PH1000F-2000F SERIES Heavy-duty rigid and foldable power harrows HEAVY-DUTY RIGID AND FOLDABL 2 Heavy-Duty Technology for Tough Conditions To meet the ever increasing

More information

DMC DMC6000/DMC7000/ DMC8000/DMC8500 Mounted and trailed disc mower conditioners with working widths from 2.4 to 3.5m

DMC DMC6000/DMC7000/ DMC8000/DMC8500 Mounted and trailed disc mower conditioners with working widths from 2.4 to 3.5m KUBOTA disc mowers 6000/7000/ 8000/8500 Mounted and trailed disc mower conditioners with working widths from 2.4 to 3.5m FULL LINE OF MOWER C Why Kubota Mower Conditioners? The Kubota range of mower conditioners

More information

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS 2 BRANDT GRAINBELTS Product: 15 Series Field Grainbelts TDLP Models: 1535TDLP, 1545TDLP LP Models: 1535LP, 1545LP 15 SERIES

More information

KUBOTA ZERO-TURN MOWER ZD1211

KUBOTA ZERO-TURN MOWER ZD1211 Z KUBOTA ZERO-TURN MOWER ZD1211 Kubota s all-new ZD1211 diesel zero-turn mower has been engineered from the ground up to deliver quality, performance, comfort and durability. Cutting grass is the coercial

More information

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders HAY MAKING AT ITS BEST! GF KUHN GYROTEDDERS Strong features that lead to quality tedding The rotors of all 1001 and 1002 series

More information

JX STRADDLE SERIES HP RATED POWER

JX STRADDLE SERIES HP RATED POWER JX STRADDLE SERIES 59-98 HP RATED POWER Water-cooled 3 and 4 cylinder diesel Turbo Engines are available on 70, 90 Dedicated left-hand shuttle and 12x12 engines tuned for high power output and & 95 models.

More information

VARIANT 380 RC, 380, 360 RC, 360. Guaranteed high performance.

VARIANT 380 RC, 380, 360 RC, 360. Guaranteed high performance. VARIANT 380 RC, 380, 360 RC, 360 Guaranteed high performance. At sunset the bales are done. This VARIANT comes up with everything that gets you further in the field. Its 83 inch (2.10 m)-wide pickup impresses

More information

463(S)-523(T) T Fanex rotary tedders

463(S)-523(T) T Fanex rotary tedders 463(S)-523(T)-553-643-683-763-833T-903-1103 Fanex rotary tedders Fanex 683 Fanex 463(S)-523(T)-553-643-683-763-833T-903-1103 The right tedder for every size farm Tedding quality at its best The Fanex range

More information

60 TH ANNIVERSARY SPECIALS

60 TH ANNIVERSARY SPECIALS 60 TH ANNIVERSARY SPECIALS BONUS LOADER^ MF 5610 CAB 105 HP 16x16 Dyna-4 transmission Fully integrated loader system from factory Fuel efficient and powerful AGCO POWER engines Unique Power Control Lever

More information

Fendt variable round balers

Fendt variable round balers Fendt variable round balers Always in top form. The Fendt round balers. When it comes to the harvesting of high-quality forage, you need machines that you can depend on. Fendt round balers give you everything

More information

SB SMALL SQUARE BALERS

SB SMALL SQUARE BALERS SB SMALL SQUARE BALERS Every day, you demand more. More from the land. More from yourself. More from your equipment. Which is why we also demand more. More capacity. More productivity-boosting features.

More information

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS 2 BRANDT GRAINBELTS Product: 15 Series Field Grainbelts Models: 1535TDLP, 1545TDLP, 1535LP, 1545LP, 1537LP+, 1547LP+ 15 SERIES

More information

SOLOMIX 1 SOLOMIX 1. Mixer feeder wagons model Trioliet. Invents for you.

SOLOMIX 1 SOLOMIX 1. Mixer feeder wagons model Trioliet. Invents for you. SOLOMIX 1 SOLOMIX 1 Mixer feeder wagons model 500-1400 Trioliet. Invents for you. Trioliet feeding technology since 1950 Feeding with perfect precision Trioliet was established by the three Liet brothers

More information

Three-way tipper HKD 302 / TKD 302

Three-way tipper HKD 302 / TKD 302 Three-way tipper HKD 302 / TKD 302 2 3 The three-way tipping system maximum power with highest stability. The matched balance between the stable chassis and the Three-way tipper HKD 302 / TKD 302 Proven

More information

Single and twin augers

Single and twin augers KODIAK Technical specifications KODIAK KODIAK KODIAK KODIAK KODIAK KODIAK KODIAK KODIAK / 0 / / / 6 / 8 / 0 / / Capacity m 3 0 6 8 0 Number of augers Length mm 5500 5650 5650 5650 650 650 650 Width max.

More information

MULTILIFT XR Power range hooklifts

MULTILIFT XR Power range hooklifts MULTILIFT XR Power range hooklifts Get hooked on lifting www.hiab.com Designed to keep the wheels rolling MULTILIFT XR Power range The new MULTILIFT XR Power range hooklifts for 26 32 ton GVW trucks offer

More information

Swadro 907 Swadro 1000 Rotary Rakes

Swadro 907 Swadro 1000 Rotary Rakes Swadro 907 Swadro 1000 Rotary Rakes www.krone.de The Swadro rotor All KRONE rotary rakes stand out for high-quality build Fluid grease filled rotor drive gearboxes Enclosed rotor housings: completely maintenance-free

More information

SE 150/ row, offset trailed potato harvester with large bunker

SE 150/ row, offset trailed potato harvester with large bunker SE 150/170-60 2-row, offset trailed potato harvester with large bunker Welcome to the upper class: strong, stronger SE 150/170-60! Absolutely innovative, robust and reliable the SE 150/170-60 from Grimme.

More information

COMPANY PROFILE NORTH AMERICA. Trioliet. Invents for you.

COMPANY PROFILE NORTH AMERICA. Trioliet. Invents for you. COMPANY PROFILE COMPANY PROFILE NORTH AMERICA Trioliet. Invents for you. Trioliet feeding technology since 1950 Trioliet BV NL - 7575 BW Oldenzaal Kleibultweg 59 The Netherlands Over 60 years of innovation

More information

EXTRΔ H-432H-440H. Mounted Plain Disc Mowers

EXTRΔ H-432H-440H. Mounted Plain Disc Mowers EXTRΔ 224-228-232-428H-432H-440H Mounted Plain Disc Mowers Cutting Performance in New Dimensions! Low noise cutterbar The new developed EXTR cutterbar is designed for low maintenance and offers a very

More information

HAY TEDDERS Three-point attachment trailed

HAY TEDDERS Three-point attachment trailed HAY TEDDERS Three-point attachment trailed Innovative Outstanding spread pattern Wide range of products fella.eu 2 3 BEST HARVEST TRADITION, INNOVATION, PASSION For more than 90 years, FELLA has always

More information

rogator 618s SERIOUS MACHINERY

rogator 618s SERIOUS MACHINERY Challenger RoGator 618S The ultimate vehicle for spraying and spreading systems, for the most demanding farmers and contractors. Designed with the toughest operating conditions in mind, the Challenger

More information

Fendt Former Hay Rake

Fendt Former Hay Rake Fendt Former Hay Rake Tidy work. The Fendt Former Hay Rake. Do you expect the toughest jobs to be completed quickly and without complications? Then you should definitely have a look at the innovative Fendt

More information

Rotary Rakes RR2109 RR2211 RR2313 RR2324. Single-Basket. Dual-Basket

Rotary Rakes RR2109 RR2211 RR2313 RR2324. Single-Basket. Dual-Basket Rotary Rakes Single-Basket Dual-Basket RR2109 RR2211 RR2313 RR2324 Single- or dual-basket models let you rake crop quickly and delicately to get your high-quality baling done sooner. Before you step out

More information

New Holland TC5040 combines step up in performance and versatility

New Holland TC5040 combines step up in performance and versatility New Holland TC5040 2 3 New Holland TC5040 combines step up in performance and versatility Since their introduction in 1992, thousands of customers and operators have found the TC combine range to far exceed

More information

Taarup 2400 and 2500 series Mounted Disc Mowers. Disc Mowers offering reliable performance and a clean cut

Taarup 2400 and 2500 series Mounted Disc Mowers. Disc Mowers offering reliable performance and a clean cut Taarup 2400 and 2500 series Mounted Disc Mowers Disc Mowers offering reliable performance and a clean cut Taarup 2400 series Flexible suspension and reliable performance Taarup offers a new rear mounted

More information

Kubota Hay Tools and Spreaders Now Arriving at Kubota Dealerships Nationwide

Kubota Hay Tools and Spreaders Now Arriving at Kubota Dealerships Nationwide FOR IMMEDIATE RELEASE Contact: (877) KUBOTA-NEWS [(877) 582-6826] newsroom@kubotamedia.com Kubota Hay Tools and Spreaders Now Arriving at Kubota Dealerships Nationwide First Phase of the New Product Line

More information

MASCHIO FLAIL MOWERS. Give you more. Rear and Offset flail mowers

MASCHIO FLAIL MOWERS. Give you more. Rear and Offset flail mowers MASCHIO FLAIL MOWERS Give you more Rear and Offset flail mowers MASCHIO FLAIL MOWERS...give you more The Maschio Flail Mower range is one of the largest available on the UK market with models and features

More information

ROTARY TEDDERS: ROTARY RAKES: 4 - rotor, 6- rotor. 1 - rotor, 2- rotor in-line rakes, 2 rotor rakes with central swath.

ROTARY TEDDERS: ROTARY RAKES: 4 - rotor, 6- rotor. 1 - rotor, 2- rotor in-line rakes, 2 rotor rakes with central swath. For professionals ROTARY TEDDERS: 4 - rotor, 6- rotor ROTARY RAKES: 1 - rotor, 2- rotor in-line rakes, 2 rotor rakes with central swath ...Clean, thoroughly aerated swath TABLE OF CONTENTS Page Farm s

More information

RAPIDE Loader / Multi-purpose wagon FORAGE

RAPIDE Loader / Multi-purpose wagon FORAGE RAPIDE Loader / Multi-purpose wagon FORAGE Schuitemaker Machines BV was established in 1919 as a manufacturer of machines for the agricultural and industrial sectors. Thanks to many years of experience,

More information

LINER Central swathers. Taking swathing into a whole new dimension.

LINER Central swathers. Taking swathing into a whole new dimension. LINER Central swathers Taking swathing into a whole new dimension. Perfectly coordinated forage harvesting from CLAAS. For daily grassland-based operations, you need more than just robust machinery; you

More information

Pöttinger TOP. Rakes for centre swathing

Pöttinger TOP. Rakes for centre swathing Pöttinger TOP Rakes for centre swathing 97+023.02.0910 TOP s-line Rakes for centre swathing with two or four rotors Pöttinger has developed a new rotor-lifting system for heavy duty twin rotor models,

More information

LELY WELGER. High-density balers

LELY WELGER. High-density balers LELY WELGER High-density balers Main drive with overload protection Two friction clutches, one in front of and one behind the flywheel, protect the universal joint and the tractor as well as the baler

More information

n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A

n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A 02 n Photo may include optional equipment FORKLIFT Excellent model NEW criterion of Forklift

More information

Introduction. Contents

Introduction. Contents BIGAB COLLECTION Introduction BIGAB is produced by FORS MW which develops, manufactures and markets small and medium sized, high quality, customer related products at a competitive price. Besides BIGAB

More information

PICK UP DIRECT DISC ORBIS CONSPEED HS2. Out in front - attachments for the JAGUAR.

PICK UP DIRECT DISC ORBIS CONSPEED HS2. Out in front - attachments for the JAGUAR. PICK UP DIRECT DISC ORBIS CONSPEED HS2 Out in front - attachments for the JAGUAR. Efficient maize harvesting is an art. Built to meet the challenge. With their versatile range of front attachments, CLAAS

More information

SOLOMIX X-RANGE X-RANGE. Mixer Feeder wagons model 2400L Trioliet. Invents for you.

SOLOMIX X-RANGE X-RANGE. Mixer Feeder wagons model 2400L Trioliet. Invents for you. SOLOMIX X-RANGE X-RANGE Mixer Feeder wagons model 2400L - 5200 Trioliet. Invents for you. Trioliet feeding technology since 1950 Feeding with complete precision Trioliet was founded in 1950 by the three

More information

Your solution for efficient work. Manure. spreaders

Your solution for efficient work. Manure. spreaders Your solution for efficient work Manure spreaders EM Premium* Stay Ahead To meet the growing expectations of Farmers we have created effective solutions in the form of EM Premium service package. We take

More information

New Roll-Belt baler Roll-Belt 150 Roll-Belt 180

New Roll-Belt baler Roll-Belt 150 Roll-Belt 180 New Roll-Belt baler Roll-Belt 150 Roll-Belt 180 New Roll-Belt. Change your baling style. The all-new Roll-Belt variable chamber round baler offers unsurpassed baling flexibility and will take your baling

More information

Forage transport wagon. Giga-Trailer

Forage transport wagon. Giga-Trailer Forage transport wagon Giga-Trailer Forage transport wagon Robust & powerful The Strautmann Giga-Trailer Front panel hydraulically folding Mechanical tailgate display for easy monitoring Corrosion-resistant

More information

Mobile Crane LTM Lifting capacity: 300 t. Telescopic boom length: 78 m. Hoist height: 114 m

Mobile Crane LTM Lifting capacity: 300 t. Telescopic boom length: 78 m. Hoist height: 114 m Mobile Crane Lifting capacity: 300 t Telescopic boom length: 78 m Hoist height: 114 m mobile crane Ready for use quickly and flexibly 2 The sets standards in the 300-tonne class in terms of lifting capacity

More information

Watch Vermeer products work at vermeer.com.

Watch Vermeer products work at vermeer.com. TEDDERS The Hook Tine Advantage Haying in high moisture climates? With above normal rainfall? Or, just trying to close the gap between cutting and baling to shorten drying times and reduce nutritional

More information