Includes (1) metrix KVR-150 Amplifier And (1) Pair metrix KVR-52 Speakers
|
|
- Theodore Matthews
- 5 years ago
- Views:
Transcription
1 kvr power kit Installation Manual Includes (1) metrix KVR-150 Amplifier And (1) Pair metrix KVR-52 Speakers Fits 2009-Current Kawasaki Vaquero and Voyager Models For Best Results Please Read the Entire Manual Before Starting!
2 Congratulations! Congratulations and thank-you for purchasing Metrix Audio s KVR Power kit by Hogtunes. Since positive word of mouth is the best way to grow our business, we want your new kit to work as well as designed to. If you have any questions or concerns, we are here to help! Please contact us during regular business hours via or phone. Metrix Audio Contact Information tech@metrixaudio.com Tel: If you still need help, then please consider a professional installation by your retail dealer. 2
3 installation Step #1: Remove the seat, and power and ground wires from the battery. Remove the bikes outer fairing/headlamp assembly from the bike. Refer to your manual if you need help with this. Note: A towel or something similar over the front fender may help prevent unnecessary scratches and dings. High volume expletives, and having your friends laugh at you may also be kept to a minimum. Step #2: On each speaker grill, remove the 2 screws highlighted by the arrows as shown in the Diagram 1.1 and remove the grills from the bike. Undo the screws that hold each speaker to the bike, gently pull each wire from each speaker, and pull each speaker away from the bike. Diagram 1.1 Step #3: Plug the 2 main connectors of the wire harness into Power and Audio Input into the amplifier. Tighten (snug) the flathead screws on the green power connector to prevent it from backing out while riding. Step #4: The amplifier comes affixed to its metal mounting plate and will be installed as in Diagram 1.2. Remove the 2 bolts as highlighted by the white arrows. Position the amp/ plate over the holes, and re-install factory bolts. Diagram 1.2 Note: The supplied wire harness is custom made for your bike. All the wires are the correct length, and have the right connectors. If you find yourself with far too much wire, or not nearly enough, chances are you are about to plug the wires in the wrong place. Please call us if you need help! 3
4 Step #5: On the clutch side of the bike, carefully pull the factory speaker wires out of the speaker housing and plug them into the yellow/black wires on the audio input harness, noting these will only go on one way. On the brake side of the bike, carefully pull the factory speaker wires out of the speaker housing and plug them into the green/black wires on the audio input harness, noting these will only go on one way. note: On the audio input harness you will see 4 wires that end in a 4 pin blue plug. This is an expansion port for possible future products & is NOT used in this installation! Step #6: On the opposite side of the amp are 3 (75mm) wires that end in a 4 pin black plug. This plug is what carries the amplified power out to the new speakers. Locate the 4 pin harness with blue/black and brown/ black wires, and plug it into the amplified output plug on the amp. Take the brown/black wires, and feed them into the speaker housing on the clutch side of the bike. Take one of the new speakers, attach the wires making sure the connection is solid, and using the factory screws, install the new speaker into the fairing. Take the blue/black wires, and feed them into the speaker housing on the brake side of the bike. Take the other new speaker, attach the wires making sure the connection is solid, and using the factory screws, install the other speaker into the fairing. Supplied in the kit is a black gummy (butyl rubber) material. Take a piece of this and seal around each speaker wire where they go into the speaker housings. Step #7: The last thing to wire up is the 3 wires on the (green) power plug. Just below the storage compartment on the brake side of the bike is a provision for where a cigarette lighter could go. Just behind this location is a factory yellow wire with a female bullet connector on it. The male connector on the yellow wire from the amp will plug into that. If you already have another accessory being powered by this factory yellow wire, plug the amps male connector directly to the bikes factory female connector on its yellow wire. You will see a female bullet as part of a pigtail at the end of the amplifiers yellow wire that can be used to power your accessory. Note: The yellow wire is a turn on lead and tells the amp to turn on/off as the bikes ignition switch is on/off. 4
5 Step #8: Routing the power/ground harness. You will see place where factory wires harnesses exit the fairing, towards the frame of the bike. The amps power and ground wires will exit there, and run down the brake side backbone of the frame, under the fuel tank. You may need to undo the 2 bolts that secure the back of the fuel tank and gently lift the tank up to help run these wires. With the back of the tank up, you may find that a make shift wire snake will make things easier. Connect the amps red power wire and factory positive wire to the positive post of the battery. Locate the bolt on the frame shown with the arrow in diagram 1.3, and connect the black (ground) wire to that. Re-install the factory ground wire to the battery. Diagram 1.3 The amp and new speakers are now installed and wired. Please take a minute and make sure all connections are solid. Once you re satisfied with the connections, turn the bike s ignition on at low volume, make sure everything is working. Step #9: Using the supplied zip-ties clean up and secure any wires on the supplied harness. IMPORTANT! You must turn the front wheel to each extreme side making sure no wires can bind or impede the steering of the motorcycle. Failure to do so can cause an accident causing serious injury or death! Reinstall the front fairing, and seat and your done! Your system is designed specifically for a motorcycle at speed. Exhaust noise and wind noise have been taken into careful consideration in how your system performs. How your new system sounds in a driveway or garage is radically different from how it will sound at highway speeds. Although your system was voiced with a factory radio with its bass and treble controls in the middle position, if you feel the need to make adjustments, please do so (carefully) at your normal cruising speed. If you re using an external device to supply music through the radios aux port, we have an article on our website that can help make your peripheral audio device sound as good as it can. The article is at: 5
6 Amplifier wiring diagram Clutch-side factory speaker wire plugs into yellow/black on amp Brake-side factory speaker wire plugs into green/black on amp Yellow wire goes to switched power Brown/Black wire plugs into clutchside speaker Blue/Black wire plugs into Brake side speaker Power & ground wires go to battery area 6
7 Warranty Information Metrix Audio speakers are warranted for a period of 5 years to the original purchaser. Metrix Audio Amplifiers are warranted for 1 year from original purchase date. Proof of purchase is required for all warranty claims. All Warranty claims must be made through the dealer this product was originally purchased from. Speakers found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Metrix Audio s sole discretion. Amplifiers will be repaired. What Is Not Covered: 1) Any expense related to the removal or re-installation of Metrix Audio products. 2) Repairs to these products performed by anyone other than Metrix Audio. 3) Subsequent damage to any other components. 4) Any product purchased from a non-authorized Metrix Audio dealer. 5) Damage to Metrix Audio products due to an accident or collision. 6) Metrix Audio Amplifiers with broken or removed warranty void stickers. Technical Specifications Metrix Audio KVR-150 Amplifier Rated Power at 4 Ohms: 75 Watts/Channel (@1% THD) Efficiency: >70% Fuse: 15 amp Metrix Audio KVR-52 Speakers Power Handling: Frequency Response: Sensitivity: Nominal Impedance: > 75 Watts 55Hz - 23KHz 92dB 1 watt/1meter 4.0 Ohms The Words: Kawasaki, Voyager, and Vaquero are registered trademarks of Kawasaki Heavy Industries Ltd, Kobe, Japan and are used for reference only. There is no Affiliation Between Kawasaki Heavy Industries Ltd and Hogtunes Inc. 7
8 Metrix Audio products will play much louder than the original equipment, which can be a distraction to the rider and/or passenger. Please use caution when adjusting, or playing your stereo at high volume, especially in traffic. You are a valued customer so please: Ride Alert Arrive Alive!
5X7REV/RG INSTALLATION MANUAL
5X7REV/RG INSTALLATION MANUAL INCLUDES: (1) Hogtunes NCA 70.2 Amplifier (1) Pair Hogtunes 572.2-AA Speakers (1) Road Glide Adaptor Kit For Use on All 1998 and Newer FLTR Road Glide Models With Factory
More informationnca NCA 450-RM installation Manual For Use On Rushmore platform bikes 200 Watt 4-Channel Amplifier
nca NCA 450-RM 200 Watt 4-Channel Amplifier For Use On Rushmore platform bikes installation Manual Thank you for choosing the Hogtunes NCA 450-RM Amplifier for 2014+ Rushmore Platform Bikes. Since positive
More informationREV 200SG Kit-RM. High Performance Front Speaker Kit with 200 Watt Amplifier. installation Manual
REV 200SG Kit-RM High Performance Front Speaker Kit with 200 Watt Amplifier For Use Use On On 1998-2013 rushmore Ultra Classics platform And Tri-Glides models installation Manual Thank you for choosing
More informationINSTALLATION MANUAL. For Use On Road Glide Ultras or Road Glides With King Tour Paks And Rear Speaker Boxes
DESIGNED AND ENGINEERED IN CANADA FOR THE GREAT AMERICAN CRUISER INSTALLATION MANUAL For Use On Road Glide Ultras or Road Glides With King Tour Paks And Rear Speaker Boxes *Do not install this kit if any
More information225SG KIT-AA High Performance Front Speaker and Amplifier Kit For Use On batwing model bikes with factory radios
225SG KIT-AA High Performance Front Speaker and Amplifier Kit For Use On 1998-2013 batwing model bikes with factory radios installation Manual Thank you for choosing the Hogtunes 225 SG KIT-AA for 1998-2013
More informationrev REV 200RG KIT-AA High Performance Front Speaker and Amplifier Kit
rev REV 200RG KIT-AA High Performance Front Speaker and Amplifier Kit For Use On 1998-2013 Road glide model bikes with factory radios installation Manual READ ENTIRE MANUAL BEFORE STARTING INSTALLATION!!
More informationHigh Performance Front Speaker Kit with 225 Watt Amplifier. For Use On rushmore ROAD GLIDE models. installation Manual
225RG 225rg Kit-RM kit-rm High Performance Front Speaker Kit with 225 Watt Amplifier For Use On rushmore ROAD GLIDE models installation Manual A video version of this manual is available at www.hogtunes.com/support/videos.html
More information225SG Kit-RM. installation Manual. For Use On rushmore FLH models. High Performance Front Speaker Kit with 225 Watt Amplifier
225SG Kit-RM High Performance Front Speaker Kit with 225 Watt Amplifier For Use On rushmore FLH models installation Manual A video version of this manual is available at www.hogtunes.com/support/videos.html
More informationWBASG Kit. IMPORTANT! A Radio Re-Flash Is Strongly Encouraged Before Proceeding. Please Read Manual For More Information
WBASG Kit installation manual IMPORTANT! A Radio Re-Flash Is Strongly Encouraged Before Proceeding. Please Read Manual For More Information Thank you for your purchase of Wild Boar Audio s Amp with Front
More informationJAMP-660SG15-CVO. Installation Instructions. ROKKER XXR 660w RMS Dual-Amplifier Kit For Harley CVO Street Glide
ROKKER XXR 660w RMS Dual-Amplifier Kit For 2015-2018 Harley CVO Street Glide # JAMP-660SG15-CVO 2017 J&M Corporation. All rights reserved. 9/17 Installation Instructions Product Description This is the
More informationROADTHUNDER FAIRING SPEAKER KIT BY MTX, CHROME 2717
THANK YOU FOR CHOOSING KURYAKYN! Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the installation,
More information180w Performance Series 2-CH Amplifier Kit For Harley Street Glide/Ultra/Ultra LTD. Fairing JMAA-1800HC14
180w Performance Series 2-CH Amplifier Kit For 2014-18 Harley Street Glide/Ultra/Ultra LTD. Fairing # JMAA-1800HC14 2017 J&M Corporation. All rights reserved. 9/17 Installation and Operation Instructions
More information200w Performance Series 2-CH Amplifier Kit For Harley Street Glide/Ultra/Ultra LTD. Fairing JMAA-2000HC14
200w Performance Series 2-CH Amplifier Kit For 2014-19 Harley Street Glide/Ultra/Ultra LTD. Fairing # JMAA-2000HC14 2018 J&M Corporation. All rights reserved. 9/18 Installation and Operation Instructions
More informationJAMP-350HR15. Installation and Operation Instructions. 350W ROKKER XXR Amplifier Kit For Harley RoadGlide/ Ultra/Ultra LTD.
350W ROKKER XXR Amplifier Kit For 2015-18 Harley RoadGlide/ Ultra/Ultra LTD. Fairing # JAMP-350HR15 2018 J&M Corporation. All rights reserved. 4/18 Installation and Operation Instructions Product Description
More informationSADDLEBAG LID SPEAKER KIT TMS69BL H-D. Installation & Operation. Installation assistance available at:
Installation assistance available at: www.rockfordfosgate.com/rftech 600 South Rockford Drive Tempe, Arizona 85281 United States Direct: (480) 967-3565 Toll Free: (800) 669-9899 ROCKFORDFOSGATE.COM 1998-2013
More informationPerformance Series 400W 4-CH Amplifier Kit For Harley Road Glide Fairing with Rear Speakers JMAA-4000HR06-RCR
Performance Series 400W 4-CH Amplifier Kit For 2006-2013 Harley Road Glide Fairing with Rear Speakers # JMAA-4000HR06-RCR 2018 J&M Corporation. All rights reserved. 6/18 Installation and Operation Instructions
More informationInstallation Instructions
J&M STAGE-4 ROKKER XXR Custom 630w 4-/ Amplifier Installation Kit for 2014-2018 Harley Ultra/Ltd CVO # XXRK-630SP4-14UL-CVO 2017 J&M Corporation. All rights reserved. 9/17 Installation Instructions Product
More informationJAMP-330HR06. Installation and Operation Instructions. ROKKER XXR 330W 2-CH Amplifier Kit For Harley RoadGlide Fairing
ROKKER XXR 330W 2-CH Amplifier Kit For 2006-2013 Harley RoadGlide Fairing # JAMP-330HR06 2016 J&M Corporation. All rights reserved. 10/16 Installation and Operation Instructions Product Description This
More informationAmp & Speaker Upgrade Install Instructions for Victory Cross Country
Amp & Speaker Upgrade Install Instructions for Victory Cross Country Tools Needed: 13mm Socket 4mm Ball Head Allen Socket 5mm Allen Wrench 10mm Wrench Wire Cutters Wire Strippers Phillips Screwdriver Pocket
More informationJMAA-2000HR15. Installation and Operation Instructions. 200w Performance Series Amplifier Kit For Harley RoadGlide/Ultra
200w Performance Series Amplifier Kit For 2015-2019 Harley RoadGlide/Ultra # JMAA-2000HR15 2018 J&M Corporation. All rights reserved. 9/18 Installation and Operation Instructions Product Description J&M
More informationJAMP-500HC-JHD1. Installation and Operation Instructions
ROKKER XTP Series 4-Channel Amplifier Kit For Connection To The Jensen HD1BT Radio As Installed Into 1998-2013 Harley Davidson Ultra/ Street/Electra Glide Fairings # JAMP-500HC-JHD1 2014 J&M Corporation.
More informationProduct Description. Installation Instructions. Fig. A
Performance Series 360w RMS 4-Channel Amplifier Kit For 2015 & Later Harley RoadGlide Custom # JMAA-3600HR15-RC 2015 J&M Corporation. All rights reserved. 12/15 Installation and Operation Instructions
More informationJAMP-350HC06. Installation and Operation Instructions. 350W Amplifier Kit For Harley Ultra/ Street/Electra Glide Fairing
350W Amplifier Kit For 2006-2013 Harley Ultra/ Street/Electra Glide Fairing # JAMP-350HC06 2018 J&M Corporation. All rights reserved. 4/18 Installation and Operation Instructions Product Description This
More informationJAMP-500HR06-RCRP. Installation and Operation Instructions. 500W 4-CH Amplifier Kit For Harley Road Glide Fairing with Rear Speakers
500W 4-CH Amplifier Kit For 2006-2013 Harley Road Glide Fairing with Rear Speakers # JAMP-500HR06-RCRP 2013 J&M Corporation. All rights reserved. 5/13 Installation and Operation Instructions Product Description
More informationJAMP-500HR06-RC. Installation and Operation Instructions. 500W 4-CH Amplifier Kit For Harley Road Glide Fairing with Lower Fairing Speakers
500W 4-CH Amplifier Kit For 2006-2011 Harley Road Glide Fairing with Lower Fairing Speakers # JAMP-500HR06-RC 2011 J&M Corporation. All rights reserved. 6/11 Installation and Operation Instructions Product
More informationJAMP-250HR06P. Installation and Operation Instructions. 250W Amplifier Kit For Harley RoadGlide Fairing
250W Amplifier Kit For 2006-2013 Harley RoadGlide Fairing # JAMP-250HR06P 2013 J&M Corporation. All rights reserved. 5/13 Installation and Operation Instructions Product Description This exciting new J&M
More informationINSTALLATION INSTRUCTIONS
CLASSIC EDITION WITH AUX-IN CHROME OR BLACK FINISH THANK YOU FOR CHOOSING STEEL HORSE AUDIO! Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions,
More informationAmp & Speaker Upgrade Install Instructions for Road Glide
Amp & Speaker Upgrade Install Instructions for Road Glide Tools Needed: 1/2 inch Socket Wire Cutters 7/16 inch Socket Wire Strippers 10 mm Socket Phillips Screwdriver 1/2 inch Ratchet Wrench T25 Torx driver
More informationJMAA-3600HC-JHD1. Installation and Operation Instructions
Performance Series 4-Channel Amplifier Kit For Connection To The Jensen HD1BT Radio As Installed Into 1998-2013 Harley Davidson Ultra/ Street/Electra Glide Fairings # JMAA-3600HC-JHD1 2014 J&M Corporation.
More informationINSTALLATION INSTRUCTIONS
THANK YOU FOR CHOOSING KURYAKYN! Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the installation,
More informationInstallation Instructions
J&M STAGE-4 ROKKER XXR Custom 630w 4-/ Amplifier Installation Kit for 2015-18 Harley Roadglide Ultra CVO # XXRK-630SP4-15RU-CVO 2017 J&M Corporation. All rights reserved. 9/17 Installation Instructions
More informationPerformance Series 4-Channel Amplifier Kit For Harley Ultra (Not For RoadGlide Ultra) JMAA-4000HC06-UL
Performance Series 4-Channel Amplifier Kit For 2006-2013 Harley Ultra (Not For RoadGlide Ultra) # JMAA-4000HC06-UL 2018 J&M Corporation. All rights reserved. 6/18 Installation and Operation Instructions
More informationJAMP-500HC06-ULP. Installation and Operation Instructions. 500W Amplifier Kit For Harley Ultra (Not For RoadGlide Ultra)
500W Amplifier Kit For 2006-2013 Harley Ultra (Not For RoadGlide Ultra) # JAMP-500HC06-ULP 2013 J&M Corporation. All rights reserved. 5/13 Installation and Operation Instructions Product Description This
More informationInstallation Instructions
STAGE-5 ROKKER XXR Custom 700w 4-Speaker/ Amplifier Install Kit for 2014-2019 Harley StreetGlide # XXRK-700SP4-14SG-ST5 2018 J&M Corporation. All rights reserved. 9/18 Installation Instructions Warning:
More informationInstallation Instructions
STAGE-5 ROKKER XXR Custom 700w 4-Speaker/ Amplifier Installation Kit for 2015-2019 Harley RoadGlide # XXRK-700SP4-15RC-ST5 2018 J&M Corporation. All rights reserved. 9/18 Installation Instructions Product
More informationInstallation Instructions Harley-Davidson Saddlebag Lids
Installation Instructions Harley-Davidson Saddlebag Lids Thank you for your purchase of Bagger Audio Saddlebag Lids for your Harley- Davidson motorcycle. We have carefully engineered these products to
More informationINSTALLATION INSTRUCTIONS
THANK YOU FOR CHOOSING KURYAKYN! Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the installation,
More informationCVO - with ipod Amp & Speaker Upgrade Install Instructions for Batwing Fairing
CVO - with ipod Amp & Speaker Upgrade Install Instructions for Batwing Fairing Tools Needed: 1/2 inch Socket Wire Cutters 7/16 inch Socket Wire Strippers 5/16 inch Socket Phillips Screwdriver 1/2 inch
More informationAmp & Speaker Upgrade Install Instructions for Batwing Fairing
Amp & Speaker Upgrade Install Instructions for Batwing Fairing Tools Needed: 1/2 inch Socket Wire Cutters 7/16 inch Socket Wire Strippers 10 mm Socket Phillips Screwdriver 1/2 inch Ratchet Wrench T25 Torx
More informationBAK1500 INSTALLATION/OWNER'S MANUAL Compact Amplified Subwoofer
BAK1500 INSTALLATION/OWNER'S MANUAL Compact Amplified Subwoofer PREPARATION Getting Started Thank you for purchasing the Dual BAK1500 compact amplified subwoofer. Although Dual has attempted to ensure
More informationTS69 TS65 TS55 TS45 TS5768 TS SERIES INSTALLATION/OWNER'S MANUAL
TS69 TS65 TS55 TS45 TS5768 TS SERIES INSTALLATION/OWNER'S MANUAL Car Audio Speakers TS SERIES PREPARATION Getting Started Thank you for purchasing the TS Series car speakers. Although Dual has attempted
More information100 Watt Power Amp 50 Watts x 50 Watts Single Rack Space
User's Manual 100 Watt Power Amp 50 Watts x 50 Watts Single Rack Space 1 Introduction Congratulations on your purchase of the Rocktron Velocity 100LTD power amplifier! The Velocity 100LTD was designed
More informationInstruction Manual. What s In The Box? CANsmart Controller DNL.WHS BMW K1600 Series. Kit Contents DENALIELECTRONICS.COM
Instruction Manual Instruction Rev0 Thank you for choosing DENALI We know you would rather be riding your bike than wrenching on it, so we go the extra mile to make sure our instructions are clear and
More informationINSTALLATION LIGHTED CURVED LAY DOWN LICENSE PLATE MOUNT 3166
INSTALLATION LIGHTED CURVED LAY DOWN LICENSE PLATE MOUNT 3166 PARTS INCLUDED 1 Lighted Curved Lay Down License Plate Assembly 1 Hardware Kit Including: 6 Cable Ties 1 Dielectric Grease Pack 1 1 x 8 Tape
More informationINSTALLATION. DRIVING LIGHTS for FLHT/FLHX/FLHR 5005
DRIVING LIGHTS for FLHT/FLHX/FLHR 5005 PARTS INCLUDED 1 Right Driving Light Assembly 1 Left Driving Light Assembly 1 Right Driving Light Bracket 1 Left Driving Light Bracket 4 Driving Light Bracket Plugs
More informationCONGRATULATIONS. Dear Friend,
CONGRATULATIONS Dear Friend, Thank you for selecting Bazooka subwoofer speaker systems for your car stereo system. The Bazooka Reference series represents SAS s continued commitment to efficiency and design.
More informationTBX10A INSTALLATION/OWNER'S MANUAL 10" Sealed Enclosure with Built-in Amplifier
TBX10A INSTALLATION/OWNER'S MANUAL 10" Sealed Enclosure with Built-in Amplifier Getting Started Thank you for purchasing the Dual TBX10A 10" ported enclosure with built-in amplifier. Although Dual has
More informationINSTALLATION/OWNER'S MANUAL DP " Woofer in Enclosure
INSTALLATION/OWNER'S MANUAL DP1000 10" Woofer in Enclosure Installation Thank you for purchasing the DP1000 10" Woofer with enclosure. Although Dual has attempted to make sure all of the information contained
More informationowner s manual 4.00-inch (100 mm) Coaxial Loudspeakers
owner s manual 4.00-inch (100 mm) Coaxial Loudspeakers Thank you for choosing a JL Audio Evolution C2 Coaxial Speaker System for your automotive sound system. These Evolution Speakers have been designed
More information3SERIES. OWNERS MANUAL THREE
3SERIES THREE OWNERS MANUAL www.acoustic-energy.co.uk Congratulations on choosing the Acoustic Energy 3 Series, speakers designed to offer exceptional performance with the highest standards of design
More informationINSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT
INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT Thank you for choosing the Motor Trike Cross Country / Cross Roads / Hard Ball rake kit. We ask that you read
More informationJAMP-330RK14-BLU. Installation Instructions. ROKKER XXR 330w BlueTooth Controlled Amplifier Kit for Harley RoadKing
ROKKER XXR 330w BlueTooth Controlled Amplifier Kit for 1998-2018 Harley RoadKing # JAMP-330RK14-BLU 2017 J&M Corporation. All rights reserved. 9/17 Installation Instructions Product Description This exciting
More informationHIGH PERFORMANCE MARINE AUDIO 10CX MARINE COAXIAL / FULL RANGE SPEAKER SYSTEMS OPERATION / INSTALLATION MANUAL. wetsounds.com
HIGH PERFORMANCE MARINE AUDIO 10CX MARINE COAXIAL / FULL RANGE SPEAKER SYSTEMS OPERATION / INSTALLATION MANUAL wetsounds.com 1 REVO 10 CX OPERATION REVO 10 CX MARINE COAXIAL / FULL RANGE SPEAKER SYSTEMS
More informationINSTALLATION FORK MOUNTED DRIVING LIGHTS 5008
5008 PARTS INCLUDED 1 Right Fork Mount Assembly 1 Left Fork Mount Assembly 2 H3 Driving Light Assemblies 1 12-Pin Wiring Adapter 1 Hardware Kit for Fork Mount Driving Lights, Including: 6 5/16-18 Nylock
More information5-Channel Power Amplifier. User s Manual. Version 1 MODERN SOUND FOR YOUR CLASSIC.
5-Channel Power Amplifier User s Manual MODERN SOUND FOR YOUR CLASSIC Version 1 www.retromanufacturing.com TABLE OF CONTENTS WELCOME 2 WHAT S IN THE BOX 3 PRECAUTIONS 4 POWER AND GROUND CONNECTIONS 6 MOUNTING
More informationINSTALLATION. DRIVING LIGHTS for FLHT/FLHX/FLHR BLACK. THANK YOU FOR CHOOSING KϋRYAKYN!
THANK YOU FOR CHOOSING KϋRYAKYN! PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND PROPERTY DAMAGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS, AND NOTICES REGARDING THE, USE,
More informationInstallation and Users Guide. Plain-Talk. MINI Bluetooth kit with Steering Wheel Controls. Version 2.1
Installation and Users Guide MINI Bluetooth kit with Steering Wheel Controls Version 2.1 Plain-Talk This product covers all Mini Cooper vehicles as follows: 03/2002-2006 Model Year Mini Cooper and Cooper
More informationDWS404 DWS524 DWS654 DWS684 DWS694. DWS SERIES INSTALLATION/OWNER'S MANUAL Car Audio Speakers
DWS404 DWS524 DWS654 DWS684 DWS694 DWS SERIES INSTALLATION/OWNER'S MANUAL Car Audio Speakers PREPARATION Safety Guidelines Thank you for purchasing the DWS Series car speakers. Although Dual has attempted
More informationINSTALLATION. led fairing lights for gl
for gl1800 4627 Fits: 01-up GL1800 Parts Included 4 7-Color Lizard Lights 1 7-Color Controller/Switch 1 Hardware Kit including: 4 Replacement Adhesive Pads 4 18 Extensions 1 Double Male Lizard Light Connector
More informationFord Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List:
2015-2017 Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List: LED Foglights/ Bezels 2 Flat head & Phillips screwdriver (if you ordered part#3600) Ratchet & Socket set OR Wiring harness
More information3-Channel Power Amplifier. User s Manual. Version 1 MODERN SOUND FOR YOUR CLASSIC.
3-Channel Power Amplifier User s Manual MODERN SOUND FOR YOUR CLASSIC Version 1 www.retromanufacturing.com TABLE OF CONTENTS WELCOME 2 WHAT S IN THE BOX 3 PRECAUTIONS 4 POWER AND GROUND CONNECTIONS 6 MOUNTING
More informationPowerClass coaxial speakers
PowerClass coaxial speakers INTRODUCTION Thank you for your purchase of this PowerClass Coaxial Loudspeaker system from PrecisionPower. Our engineers have combined state of the art materials such as foamed
More informationENFORCER TM 6201-IQ ELECTRONIC SIREN
ENFORCER TM 6201-IQ ELECTRONIC SIREN INSTALLATION & OPERATION MANUAL CONTENT PAGE UNPACKING 2 INTRODUCTION 2 STANDARD FEATURES 2 INSTALLATION & MOUNTING 3 MOUNTING THE ENFORCER TM 6201 3 WIRING & ADJUSTMENTS
More informationAux Port. Installation Instructions For 3.5mm Stereo Harness
Aux Port Installation Instructions For 3.5mm Stereo Harness Thank you for choosing the Double Apex Aux Port! If you have any questions about the installation please do not hesitate to email us at support@doubleapex.co
More informationowner s manual 3.50-inch (90 mm) Coaxial Loudspeakers
owner s manual 3.50-inch (90 mm) Coaxial Loudspeakers Thank you for choosing a JL Audio Evolution C2 Coaxial Speaker System for your automotive sound system. These Evolution Speakers have been designed
More informationG Cinema. simple set-up guide
TMTM G Cinema simple set-up guide thank you for choosing JBL. For over 50 years, JBL has been involved in every aspect of musical and film recording and reproduction, from live performances to monitoring
More information2013 Road King CVO FLHRSE5 Detachable Fairing w/ Garmin Zumo 665 Installation Instructions
2013 Road King CVO FLHRSE5 Detachable Fairing w/ Garmin Zumo 665 Installation Instructions 1 1. Turn ignition switch to on position and leave there. This will prevent alarm from going off when you disconnect
More informationCOAXIAL SPEAKERS FI4-F3, FI5-F3, FI57-F3, FI6-F3, FI69-F3
COAXIAL SPEAKERS FI4-F3, FI5-F3, FI57-F3, FI6-F3, FI69-F3 2 OWNERS MANUAL Congratulations on purchasing your FLI speakers. Please read this manual in order to fully understand how to get the best results
More informationI N S TA L L AT I O N
I N S TA L L AT I O N 5008 fits: H-D: '80-Up Electra glide, tour glide, road king, road glide or street glide PartS Included 1 Right Fork Mount Assembly 1 Left Fork Mount Assembly 2 H3 Driving Light Assemblies
More informationUltra-Thin DASH SPEAKERS
Ultra-Thin DASH SPEAKERS USER S MANUAL MODERN SOUND FOR YOUR CLASSIC www.retromanufacturing.com TABLE OF CONTENTS WELCOME 2 PRECAUTIONS 3 INSTALLATION INSTRUCTIONS 4 SPECIFICATIONS 9 LIMITED WARRANTY 10
More informationSADDLEBAG AUDIO WIRE HARNESS KIT P/N
SADDLEBAG AUDIO WIRE HARNESS KIT P/N 2880986 APPLICATION ALL INDIAN MOTORCYCLES WITH BOTH TRUNK AND SADDLEBAG AUDIO INSTALLED BEFORE YOU BEGIN Read these instructions and check to be sure all parts and
More informationWOOFER ENCLOSURES OPERATION & INSTALLATION
BOX THAT ROCKS! BTR-82/BTR-83 BTR-103/BTR-123 BTR-153/BTR-2102 BTR-2122/BTR-2152 WOOFER ENCLOSURES OPERATION & INSTALLATION WARNING: READ THIS MANUAL BEFORE INSTALLING. FAILURE TO FOLLOW THE INSTRUCTIONS
More informationSlamPak SLPK-CAN-SPYDER1 SKU#94491& I n s t a l l a t i o n G u i d e for the
SlamPak I n s t a l l a t i o n G u i d e for the SLPK-CAN-SPYDER1 SKU#94491& 94490 If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to
More informationINSTALLATION CLAMP-ON FORK MOUNTED DRIVING LIGHTS 5015
CLAMP-ON 5015 PARTS INCLUDED 2 Driving Lights 2 Side Mount Clamps-43mm/49mm 1 Hardware Kit Including: 2 49mm Spacers 4 43mm Spacers 2 Pivot Dome Washers 2 3/8-16 Serrated Hex Nut 1 Wiring Kit for Driving
More informationAudio System Upgrade Package 2007-UP Jeep Wrangler (Premium Audio) 4-Door & 2- Door Operating and Installation Instructions
2007-UP Jeep Wrangler (Premium Audio) 4-Door & 2- Door Operating and Congratulations, you just purchased one of the most sophisticated 32 bit digital audio amplifiers available today. Fortunately, all
More informationCLASSIC TWINS INSTALLATION & OPERATIONS MANUAL
CLASSIC TWINS PCH-34T2 PCH-34T2D PCH-44T2 PCH-44T2D PCH-54T2 PCH-54T2D PCH-64T2 PCH-694T2 PCH-54T2U PCH-464T2 PCH-4104T2 INSTALLATION & OPERATIONS MANUAL Dear Customer, Congratulations on your purchase
More informationINSTALLATION BLIND SPOT TURN SIGNAL MIRRORS 1457
BLIND SPOT TURN SIGNAL MIRRORS 1457 PARTS INCLUDED 2 Blind Spot Turn Signal Mirror Assemblies 1 Wire Harness Kit Including: 2 Wiring Harness (four pin) 1 Adapter Harness (six pin) 2 3-Pin Female Connectors
More informationSTL K-Force 18 and Micro 14 LED Mini Light Bar
2809 Business Park Dr Buda TX 78610 Phone 800.757.2581 Fax 844.894.2652 Email customerservice@speedtechlights.com STL K-Force 18 and Micro 14 LED Mini Light Bar Operation Manual and Instructions Congratulations,
More informationAXS609 AXS612 AXS514 AXS SERIES. INSTALLATION/OWNER'S MANUAL Car Audio
AXS609 AXS612 AXS514 AXS SERIES INSTALLATION/OWNER'S MANUAL Car Audio PREPARATION Safety Guidelines Thank you for purchasing the AXS Series car speakers. Although Axxera has attempted to make sure all
More informationInstallation Instructions Compressor Kit Harley Davidson Dyna Glide Important Notice
Installation Instructions Compressor Kit Harley Davidson Dyna Glide 91-07 ATTENTION Statements in these instructions that are preceded by the following words are of special significance: W a r n i n g
More informationPWRA215. Designed for 2015 and newer Jeep Wrangler two door with base audio. T-TAP x2 10MM BOLT FUSE WIRE TIES x6 SUBWOOFER ASSEMBLY
PWRA215 Designed for 2015 and newer Jeep Wrangler two door with base audio T-TAP x2 10MM BOLT FUSE WIRE TIES x6 SUBWOOFER ASSEMBLY 200 WATT AMP BRACKET ASSEMBLY POWER HARNESS 2015 Stillwater Designs PWRA215
More information, Owner s Manual and Installation Guide
, Owner s Manual and Installation Guide R Introduction Thank you for choosing PrecisionPower audio equipment. At PrecisionPower, we proudly design and engineer the world's finest audio products. Our award
More informationTorque specifications Stainless steel ft. lbs Aluminum ft. lbs
INSTALLATION PROCESS: FK003D802-8 Complete Brake Line Kit 2013 Kawasaki VN1700 Voyager Custom ABS 2013 Kawasaki VN1700 Vaquero ABS Torque specifications Stainless steel 15-17 ft. lbs Aluminum 12-15 ft.
More informationINSTALLATION GUIDE PHANTOM TM SUBWOOFER SYSTEM. FOR BMW 3-SERIES SEDAN (F30) ver. 10/2016 DO-IT-YOURSELF 2 OUT OF HOURS F30 SEDAN
INSTALLATION GUIDE PHANTOM TM SUBWOOFER SYSTEM FOR 2012+ BMW 3-SERIES SEDAN (F30) ver. 10/2016 SKILL LEVEL REQUIRED DO-IT-YOURSELF INSTALLATION DIFFICULTY 2 OUT OF 5 INSTALLATION TIME 1.5 HOURS APPLIES
More informationOWNER S MANUAL inch (130 mm) Coaxial Loudspeakers. Thank you for choosing JL Audio loudspeakers for your automotive sound system.
OWNER S MANUAL 5.25-inch (130 mm) Coaxial Loudspeakers Thank you for choosing JL Audio loudspeakers for your automotive sound system. We strongly recommend that you have your new loudspeakers installed
More informationHow to Install and Operate the LXA300 Amplifier. Contents. Technical Assistance
How to Install and Operate the LXA300 Amplifier POWER L R HI INPUT LOW INPUT BASS -BOOST ON OFF LEVEL MIN MAX LPF HPF LPF L R PASS 50 250 HPF 50 250 PROTECT Welcome! What you're holding in your hands is
More informationRECOMMENDED TOOLS PERSONAL & VEHICLE PROTECTION SAFETY GLASSES
PART NUMBER: 250-9625 GENERAL APPLICABILITY THIS CRUISE WAS TESTED AND VERIFIED ON: ALL MODELS RECOMMENDED TOOLS PERSONAL & VEHICLE PROTECTION SAFETY GLASSES KIT CONTENTS/SERVICE PARTS ITEM QTY DESCRIPTION
More informationAUDIOphile 1" NEODYMIUM TWEETER WITH HIGH PASS CROSSOVER ND4-XFM & ND8-XFM. Owner's Manual
AUDIOphile 1" NEODYMIUM TWEETER WITH HIGH PASS CROSSOVER ND4-XFM & ND8-XFM Owner's Manual Dear Customer, Congratulations on your purchase of America s finest brand of car audio components. At Rockford
More informationTOYOTA TUNDRA HANDS FREE BLU LOGIC Preparation
TOYOTA TUNDRA 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationINSTALLATION ZOMBIE L.E.D. FUEL & BATTERY GAUGE. THANK YOU FOR CHOOSING KϋRYAKYN!
THANK YOU FOR CHOOSING KϋRYAKYN! PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND PROPERTY DAMAGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS, AND NOTICES REGARDING THE, USE,
More informationStandard Series STEREO SPEAKERS
Standard Series STEREO SPEAKERS USER S MANUAL MODERN SOUND FOR YOUR CLASSIC www.retromanufacturing.com TABLE OF CONTENTS WELCOME 2 PRECAUTIONS 3 INSTALLATION INSTRUCTIONS 4 SPECIFICATIONS 6 LIMITED WARRANTY
More informationRemove the 3-11mm nuts holding mirror on. Don t drop the nuts!
2005-2012 Ford Mustang Puddle Lamp Kit Parts List: Quantity: Tool List: LED Lamps 2 Flat head screwdriver Seals 2 Ratchet & Socket set OR Nuts 2 Adjustable Wrench Wiring harness 1 Drill & 11/16 th bit
More informationINSTALLATION. Note: Not all parts will be used in the installation of this product. -cont.-
5005 Fits: 06-up FLHX, 04-up Screamin Eagle Ultra Classic Electra Glide & Screamin Eagle Electra Glide Classic, '97-up FLHT, FLHTC, FLHTCU, FLHR PartS Included 1 Right Driving Light Assembly 1 Left Driving
More informationINSTALLATION INSTRUCTIONS
THANK YOU FOR CHOOSING KURYAKYN! Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the installation,
More informationStealthbox. STEP 1: Engage the emergency brake. Place the key into the ignition and turn to the accessory position.
Stealthbox INSTALLATION GUIDE for the SB-GM-BURBSCNSL/10W3v2 (2003-Up Chevrolet Suburban,Tahoe, Silverado & GMC Yukon,YukonXL, Sierra with front bucket seats and center console) START HERE Read the instructions
More information218 Trademark Dr Buda Texas STL 80-Watt Strobe Hideaway Kit Operation Manual and Instructions
STL 80-Watt Strobe Hideaway Kit Operation Manual and Instructions Congratulations, you are the owner of a STL 80-Watt Strobe Hideaway Kit! Your bar is equipped with the latest technology and features at
More informationOWNER S MANUAL. Cockpit Coaxial Speaker Systems MX650-CCX / MX770-CCX
OWNER S MANUAL MX650-CCX / MX770-CCX Cockpit Coaxial Speaker Systems Thank you for purchasing a JL Audio Marine Coaxial Speaker System. With proper installation, your new speakers will deliver years of
More informationINSTALLATION AIRMASTER DELUXE FAIRING 1335
AIRMASTER DELUXE FAIRING 1335 PARTS INCLUDED 1 Airmaster Fairing 1 Dragon Wing Spacer kit 1 Light Bar Relocation Hardware Kit 2 1/2" Spacers 2 1" Spacers 6 5/16"-24 x 1" Button Head Cap Screw, Chrome 4
More informationUser Guide. Model No.: GDI-GFD7200
User Guide Model No.: GDI-GFD7200 2 Important Safety Instructions and Warnings Please read before installation WARNING: CAUTION: To reduce the risk of fire or electrical shock, do not expose the product
More informationSTEREO REPLACEMENT SPEAKERS
STEREO REPLACEMENT SPEAKERS USER S MANUAL MODERN SOUND FOR YOUR CLASSIC TABLE OF CONTENTS WELCOME 2 PRECAUTIONS 3 INSTALLATION INSTRUCTIONS 4 SPECIFICATIONS 6 LIMITED WARRANTY 7 INSTALLATION NOTES 8 The
More information