JI Case ATenneco Company

Transcription

1 JI Case ATenneco Company

2 MODEL 107 AND 117 COMPACT TRACTORS Parts Catalog B OP-2000 NOTE: This catalog replaces catalogs A1155, Al 156, A1192 and A1193. Please discard them. Technical PubUcatlons 119 S. Fir^t Street Printed in U.S.A Winneconne, Wis

3 CASE MODEL 107 AND 117 COMPACT TRACTORS TRACTOR MODEL AND SERIAL NUMBER ENGINE MODEL, SERIAL AND SPECIFICATION NUMBER TRACTOR MODEL DESIGNATIONS ENGINE MODEL DESIGNATIONS 107 AND 117 C15513 SERIAL NUMBERS When \iaing this catal.ji;, notite tlif reftrenrt to sl-rial riumbfrs of various <'onl X3iients noted here and listed ui the description" ropy. By referrinn to correct serial numbers, proper parts identificiuion will be assured.

4 2 GENERAL INFORMATION Indexes This Parts Catalog is arranged for easy identification of Genuine CASE Service Parts. An alphabetical index is provided at the front of this Catalog to locate the major groups or assemblies. A numerical index at the rear of the Catalog gives the part numbers and the pages on which they are described. Illustrations All parts are illustrated in "Exploded Views" which show the individual parts in their normal relationship to each other. Reference numbers are used in the illustrations. These numbers correspond to those in the "Reference Number" column and are followed by the part number, description and quantity required. Orders Orders should plainly specify correct part number, full description, quantity required, machine model and engine model, machine and engine serial numbers, method of shipment and shipping address. Changes When changes to the machine make it necessary, revised pages for this book will be issued. The revised pages will be issued with the same page number as those they replace and the "issue" number and date will be advanced. It is imperative that revised Parts Book pages be inserted into their respective Parts Books as soon as received. Failure to do so will lead to confusion and defeat the purpose of the book. Indented Description Indented parts in the descriptive list are a part of the preceding assembly or sub-assembly. The quantity shown in the "Number Required" column is the number of parts used on a machine except where parts are indented in descriptive list. In this case the quantity shown is the number required for the preceding assembly or sub-assembly. REF. PART NO. DESCRIPTION REC A CYLINDER ASSY - rear steering 26 A SOCKET ASSY - rear cylinder 29 A A SEAT - socket ball 31 A SPRING - socket 32 A S G CLAMP ASSY - socket assy PIN - cotter. 3/16" x 3". 35 A STUD - ball,socket & cylinder BOLT - 1/4" X 5/8" N.C.hex LOCKWASHER - 1/4" SAE Terms ""Right Hand" and "Left Hand "Right Hand" and "Left Hand" sides of this machine are determined by standing at the rear of the unit and facing in the direction of forward travel.

5 a ALPHABETICAL INDEX ENGINE SECTION Air Cleaner 13 Battery 55 Breather, Crankcase 9 Camshaft 9 Carburetor Connecting Rod 7 Crankshaft 7 Cylinder Block 5 Cylinder Head 5 Electrical System Engine Block & Attaching Parts 5 Exhaust System 5 Filter, Breather 9 Flywheel 5 Fuel Strainer 13 Fuel System 13 Gasket Kits 5-15 Governor 5 Muffler 5 Oil Pan 5 Piston - 7 Spark Plug 5 Starter 53 Tank, Fuel 13 Throttle Linkage 13 Valves 9 BASIC TRACTOR SECTION Axle, Front 23 Axle, Rear Baffles. & Shrouds 11 Belts & Pulleys 33 Brakes Decals 57 Electrical System Fenders 19 Frame 17 GriUe 17 * Hitch 17 Hood 17 Implement Lift 49 Model G14 Weight Box 17 Model G6 Headlamp Kit 59 Mounts, Engine 7-9 PTO Clutch 49 Seat, Operator's 19 Steering Wheel & Gear 21 Tool Tray 17 Transmission Wheels, Front & Rear 23

6

7 CASE MODEL 107 AND 117 COMPACT TRACTORS 5 ENGINE BLOCK AND ATTACHING PARTS REF. PART NO. C C O 5999AB C C C C C C 187- C c c c c c c c c c c c c c 187- C C C c c c c c c C C C c c c c c c DESCRIPTION REQ'D HEAD - cylinder 1 BOLT - cylinder head 5/16" x 2-1/2" NC hex 8 GASKET - head 1 SPARK PLUG - (includes gasket) 1 BLOCK ASSEMBLY - short (includes cylinder, crankshaft rod assembly, camshaft, valves, piston and rings, pan and oil pump assembly, gaskets and seals) 1 BLOCK - cylinder, stripped 1 PIN - dowel 2 SEAL - oil 1 OIL PAN ASSEMBLY 1 SCREEN - oil filter 1 SCREW X 5/16" self-tapping 1 SEAL - oil 1 PLUG - drain 1 SHAFT - governor 1 PLUG - filler 1 GASKET - filler 1 GASKET - oil pan 1 SCREW - 1/4" X 1-1/4" NC hex sems 7 SPOOL - governor 1 RING - retaining, governor gear 2 GEAR ASSEMBLY - governor 1 SPACER - gear, governor 1 ROD - governor 1 LEVER - governor 1 CLAMP - lever, governor 1 SCREW X 3/8" NC hex 1 WASHER - governor - 1 LINK - throttle 1 LINK - governor 1 SPRING - governor 1 FLYWHEEL 1 BRACKET - blower housing 1 BOLT - 1/4" X 5/8" NC hex sems 2 HUB AND SCREEN 1 WASHER - belleviue 1 NUT - 1/2" NF hex 1 OIL PUMP ASSEMBLY 1 LOCKNUT - muffler 3/4" NPT conduit 1 MUFFLER - engine 1 STARTER - rope 1 SCREW - starter mounting 1/4" x 1/2" NC fillister head 4 GASKET - engine breather 2 KIT - engine gasket (includes items 3, 8, 12, 16, 17 and 42) 1 KIT - muffler 1 GASKET - exhaust flange 1 ADAPTER - muffler 1 SCREW - 5/16" x 3/4" NC fillister head, Phillips 2 Printed in U.S.A, June 1981

8

9 CASE MODEL 107 AND 117 COMPACT TRACTORS 7 CRANKSHAFT, PISTON - CONNECTING ROD REF. PART NO. 1 c c c c C c c g c c c c c DESCRIPTION REQ'D CRANKSHAFT ASSEMBLY PIN - crankshaft gear - GEAR - crankshaft - CONNECTING ROD ASSEMBLY BOLT - 5/16" X 1-1/4" NC hex PLATE - lock PISTON AND PIN ASSEMBLY (standard) oversize see ref. 9 RETAINER - piston pin PISTON AND PIN ASSEMBLY (.010 oversize) PISTON AND PIN ASSEMBLY (.020 oversize) RING SET - piston (standard) oversize see ref. 11 RING SET - piston (.010 oversize) RING SET - piston (.020 oversize) KEY - Woodruff #7 ENGINE MOUNTING PLATE (use after S/N } 1 C PLATE - engine mounting SCREW - 5/16" x 3/4" button head socket SCREW - 5/16" x 1-1/2" button head socket 2 4 C WASHER-5/16" LOCKWASHER - 5/16" internal tooth NUT - 5/16" NC hex 8 7 C SPACER 1 8 C MOUNT - engine LOCKWASHER - 5/16" 6 10 C CUSHION - rubber 4 11 C BRACKET - angle U8 BOLT - 5/16" x 5/8" NC hex LOCKNUT - 5/16" NC hex WASHER - 5/16" 4 Printed in U.S.A. June 1981

10 8

11 CASE MODEL 107 AND 117 COMPACT TRACTORS CRANKCASE BREATHER.CAMSHAFT AND VALVE ASSEMBLY REF. PART NO. 1 C C C c c c c c c c c c c c c * * * * * 19 C 16752* * DESCRIPTION REQ'D GASKET - breather 2 BODY ASSEMBLY - breather 1 FILTER - breather 1 COVER - valve 1 SCREW - #10 X 1/2" NC 2 TUBE - breather 1 KEEPER - valve spring 2 SPRING - valve 2 SEAT - valve spring 2 VALVE - intake (standard) includes C15828 keeper 1 VALVE - intake (1/32" oversize) includes CI 5828 keeper... 1 VALVE - exhaust (standard) includes C15828 keeper 1 VALVE - exhaust (1/32" oversize) includes C15828 keeper... 1 LIFTER - valve 2 CAMSHAFT 1 BOLT - 5/16 X 3-1/4" NC hex, engine mounting 1 BOLT - 5/16 X 3/4" NC hex, engine mounting 2 BOLT - 5/16 x 1-1/2" NC hex, engine mounting 1 NUT - 5/16" NC hex 1 LOCKWASHER - 5/16" 3 WASHER - 5/16" 3 NUT - lock 5/16" NC hex 1 *use before S/N Printed in U,S.A. June 1981

12 10

13 CASE MODEL t07 AND 117 COMPACT TRACTORS 11 ENGINE BAFFLES, SHROUDS AND RECTIFIER PANEL REF. PART NO. DESCRIPTION REQ'D 1 C HOUSING - blower 1 2 C BAFFLE - cylinder 1 3 C SCREW - #10 x 1/2" NC fillister head, sems 1 4 C SCREW - 1/4" x 5/8" NC hex 1 5 C CLIP - retaining, high tension wire SCREW x 1/2" round head, machine LOCKWASHER - # NUT - #5 hex 3 9 C PANEL - rectifier 1 10 C NUT - #5 NC hex, long 1 11 C BAFFLE - cylinder head 1 12 C SCREW - 5/16" x 3/4" NC hex, sems 2 Printed in U.S.A. June 1981

14

15 CASE MODEL 107 AND 117 COMPACT TRACTORS 1 FUEL SYSTEM REF, PART NO. DESCRIPTION REQ'D 1 C TANK - fuel 1 2 C STRAP - tank mounting SCREW - 1/4" x 1-1/4" round head, machine, ZP NUT - 1/4" square, ZP 2 5 C ELBOW - fuel tank 1 6 C HOSE - fuel line 8" CLAMP - hose 4 8 C CAP AND FUEL GAUGE ASSEMBLY 1 9 C CUP-mounting 1 10 C ELEMENT - air cleaner SCREW - #8 x 3/8" NC fillister head, sems 2 12 C SCREW - #10 x 1/2" NF fillister head, sems 2 13 C BODY - air cleaner 1 14 C BRACKET - air cleaner 1 15 C GASKET - air cleaner 1 16 C CARBURETOR - (repairs page 15) NUT - 1/4" NF hex 2 18 C STUD - carburetor mounting 2 19 C GASKET - carburetor 1 20 C PIPE - intake 1 21 C GASKET - intake 1 22 C SCREW - 5/16" x 1-1/8" NC fiuister head, sems 2 23 C CONTROL ASSEMBLY - speed 1 24 C CLIP SCREW - #10 x 1/2" NC hex, washer head 2 26 C CUP - conduit 1 27 C SCREW - #10 x 3/8" NF hex, sems 1 28 C SPRING - compression SCREW x 7/16" fillister head 1 30 C CONTROL - choke and throtue (used prior to S/N ) 1 30 C CONTROL - choke and throttle (used S/N and after)i., C HANDLE - control SCREW - #10 X 1/2" NC hex, (used prior to S/N ) SCREW - #8 x 1/2" (used S/N and after) 1 C DECAL - air cleaner 1 C DECAL - speed control 1 33 D FILTER - fuel 1 Printed in U.S.A. June 1981

16

17 CASE MODEL 107 AND 117 COMPACT TRACTORS 15 CARBURETOR REF. PART NO. 1 C c c c c c c c c c c c c c c c c c c c c c c c c c c c c c DESCRIPTION SHAFT AND LEVER ASSEMBLY - throttle SPRING - throttle return SHUTTER - throttle SCREW X 3/16" round head SPRING - idle regulating SPRING - main adjust SCREW - idle regulating SHAFT AND LEVER ASSEMBLY - choke SPRING - choke return SHUTTER - choke PLUG - welch PLUG - welch INLET ASSEMBLY - needle, seat and clip CUP - inlet needle FLOAT - carburetor SHAFT - float BOWL AND DRAIN ASSEMBLY - float PLUNGER ASSEMBLY - drain GASKET - drain plunger GASKET - bowl to body ADJUSTMENT SCREW ASSEMBLY - main (includes items 6, 20 and 22) "O" RING - adjust screw SCREW - idle adjust "O" RING - bowl to body FITTING - fuel inlet PIN PLUG - cup BALL - aluminum WASHER KIT - carburetor repair. REQ'D Printed in U.S.A. June 1981

18

19 CASE MODEL 107 AND 117 COMPACT TRACTORS 17 HOOD, FRAME AND GRILLE REF. PART NO. DESCRIPTION REQ'D 1 C FRAME - main(107) (use S/N and after) 1 1 C FRAME-main (107) (use before S/N ) 1 1 C FRAME - main (117) (use before S/N ) 1 1 C FRAME-main (117) shown (use S/N and after) 1 2 C LINER - dash 1 3 C DRAWBAR BOLT - 3/8" x 3/4" NC hex LOCKWASHER - 3/8" NUT - 3/8" NC hex 4 7 C TRAY - tool (107) SCREW - 1/4" x 1/2" NC hex self-tapping 4 9 C CLAMP - battery 1 10 C HOOD - (use S/N and after) shown 1 10 C HOOD-(use before S/N ) 1 11 C COVER - PTO(use S/N and after) BOLT - 3/8" x 1" NC hex LOCKWASHER - 3/8" NUT - 3/8" NC hex 2 15 C SEAL - insert(use S/N and after) 1 16 C INSERT - griue NUT - #5 NC hex SCREW - #8 x 1/2" black anodized 4 19 C STRAP - hinge BOLT - 5/16" x 1" NC hex WASHER-5/16" LOCKNUT - 5/16" NC hex 2 23 C BUMPER - PTO cover 2 24 C BUMPER - dash SCREW - 1/4" x 1/2" NC truss head LOCKNUT - 1/4" NC hex WASHER - 3/8" transaxle mounting 2 28 NSS WEIGHT BOX - (optional, order as G14 machinery item) PLUG - hole 1 30 C COVER - PTO (use before S/N ) 1 31 C SEAL - insert (use before S/N ) 1 32 C KNOB - hood latch (use before S/N ) 1 33 C LATCH - hood (use before S/N ) 1 34 C TRAY-tool (117) NUT - # 5 x 40 NC hex WASHER-3/16" LOCK WASHER - 3/16" internal tooth 1 38 C STRIP - short (use before S/N ) 2 39 C STRIP-long (use before S/N ) 1 Printed in U.S.A. June 1981

20 18

21 CASE MODEL 107 AND 117 COMPACT TRACTORS 19 SEAT AND FENDERS REF. PART NO. DESCRIPTION REQ'D 1 C SEAT ASSEMBLY 1 2 C MOUNT - seat, rubber BOLT - 5/16" X 1-1/2" NC hex 4 4 C BUMPER - seat, rubber 2 5 C BRACKET - hinge BOLT - 5/16" x 3/4" NC hex LOCKWASHER - 5/16" NUT - 5/16" NC hex 2 9 C FENDER AND SUPPORT 1 Printed in U.S.A. June 1981

22

23 CASE MODEL 107 AND 117 COMPACT TRACTORS 21 STEERING GEAR REF. PART NO. DESCRIPTION REQ'D 1 L CAP - steering (early production) NUT - jam 5/8" NC hex 1 3 NSS WHEEL - steering (early production) order items 19,20,21 and C BUSHING - flanged nylon 2 5 C SHAFT - steering KEY - Woodruff 3/16" x 3/4" 1 7 C BRACKET - steering (117) shown (use S/N and after) 1 7 C BRACKET - steering (117) (use before S/N ) 1 7 C BRACKET - steering (107) (use before S/N ) 1 7 C BRACKET-steering (107) (use S/N and after) BOLT - 5/16" x 3/4" NC, round head, square neck, ZP LOCKWASHER - 5/16" ZP NUT - 5/16" NC hex, ZP WASHER - 5/8" plain, ZP 1 12 C GEAR - steering 1 13 C PIVOT - steering gear FITTING - lube BOLT - 5/16" x 1" NC hex, ZP WASHER - 5/16" plain, ZP UAR 17 C BUTTON - friction 2 18 C WASHER - shim 1 19 C WASHER - (late production) 2 20 C CLIP - tinnerman (late production) 2 21 C WHEEL - steering (late production) 1 22 C CAP - steering wheel (late production) 1 Printed in U.S.A. June 1981

24 22

25 CASE MODEL 107 AND 117 COMPACT TRACTORS 23 FRONT AXLE REF. PART NO. 1 C C c C C c A C C C C C T C C DESCRIPTION AXLE - front * SPINDLE - right hand (use S/N and after) SPINDLE - left hand REQ'D PIN - roll L, H, spindle 3/16" x 1-1/2" 1 WASHER - thrust 13/16" 3 FITTING - lube 3 COVER - lube fitting 3 WASHER - spindle 2 WASHER - wheel spacer UAR PIN - cotter 5/32" x 1-1/4" 2 ROD - tie and drag link 2 BALL JOINT - R. H. thread 2 BALL JOINT - L. H, thread 2 LOCKWASHER - 1/2" ZP 4 NUT - 1/2" NF hex 5 NUT - 1/2" NC hex, L. H. thread 2 ARM - upper spindle (use S/N and after) PIN - axle pivot NUT - jam 3/4" NC hex KEY - 1/4" x 1/4" X 1" LOCKWASHER - 5/16" BOLT - 5/16" X 1" NC hex ARM - upper spindle (use before S/N ) SPINDLE - right hand (use before S/N ) FRONT AND REAR WHEELS 1 C C C C C C C WHEEL - front (includes bearing) 2 BEARING - sealed, inner 2 BEARING - outer 2 FITTING - lube 2 CAP - hub 2 WHEEL - rear 2 KEY - Woodruff "A" 1/4" x 7/8" 2 WASHER - 3/8" plain, ZP 2 LOCKWASHER - 3/8" ZP 2 BOLT - 3/8" X 1" NC hex, ZP 2 WASHER - 1", 10 gauge 2 WASHER - 1", 18 gauge 2 Printed in U.S.A. June 1981

26

27 CASE MODEL 107 AND 117 COMPACT TRACTORS 25 BELTS, PULLEYS AND IDLERS (107) REF. PART NO. I C C NSS 3 C c c C C C C C c C T C (use S/N and after) DESCRIPTION BELT - engine drive BELT - rear clutch ARM - idler (used prior to S/N ) (use ) ARM - idler (used S/N and after) BUSHING - idler arm SLEEVE - idler arm BOLT - 3/8" X 2-1/4" NC hex WASHER - 3/8" BOLT - 3/8" X 2" NC hex SPRING - idler BRACKET - spring attach WASHER - spacer 5/16" PULLEY - idler (see item 23) LOCKWASHER - 3/8" NUT - 3/8" NC hex PULLEY - clutch idler PULLEY - transaxle drive PULLEY - transaxle KEY - Woodruff #9 SETSCREW - 5/16" x 5/16" NC socket head PULLEY - engine and PTO drive KEY - 1/4" square x 2" SETSCREW - 5/16" x 3/8" NC socket head PULLEY - Idler, 1-1/2" wide flai^e (improved replacement for C pulley) REQ'D Printed in U.S.A, June 1981

28 28

29 CASE MODEL 107 AND 117 COMPACT TRACTORS 27 REF. PART NO, 1* C * C C * * * * C * c * * * * C T C C C C C C c c c C C c c c C C C C BELTS, PULLEYS AND IDLERS (107) (use before S/N ) DESCRIPTION REQ'D PULLEY - idler ARM - idler BRACKET - idler spring BOLT - 3/8" X 2" NC hex LOCKWASHER - 3/8" NUT - 3/8" NC hex SPRING - idler SPACER - idler arm WASHER - 3/8" BOLT - 5/16" x 1-3/4" NC hex NUT - 5/16" NC hex LOCKWASHER - 5/16" WASHER - 5/16" PULLEY - engine drive 2 KEY - 1/4" X 2" square 1 SETSCREW - 5/16" x 1/4" socket head 2 BELT - drive 1 BELT - clutch 1 PULLEY - transaxle 1 KEY - Woodruff #9 1 SETSCREW - 5/16" X 3/8" socket head 1 KEEPER - PTO belt 2 BOLT - 5/16" X 3/4" NC hex 2 BELT - PTO 1 PULLEY - transaxle drive 1 PULLEY - clutch idler 1 KIT - modification (used prior to S/N ) 1 BRACKET - idler 1 BOLT - 5/16" X 3-1/4" NC hex, grade 8 WASHER - special LOCKNUT - 5/16" NC hex SLEEVE - inner PULLEY - idler (see item 47) BRACKET - spring BOLT - 3/8" X 2" NC hex LOCKWASHER - 3/8" WASHER - 5/16" NUT - 3/8" NC hex - PIN - clevis 5/16" x 3-3/16" (see page 49) PIN - cotter STRIP - short STRIP - long LOCKWASHER - 3/16" internal NUT - 5 x 40 NC hex WASHER - 3/16" PULLEY - idler, 1-1/2" wide flange (improved replacement for C pulley) DECAL- starting caution 1 *Parts not used if Tractor has C modification kit installed. Printed m U.S.A. June 1981

30 28

31 CASE MODEL 107 AND 117 COMPACT TRACTORS 2 9 BELTS, PULLEYS AND IDLER (117) (use before S/N } REF. PART NO. DESCRIPTION REQ'D 1* C PULLEY - idler 1 2* C ARM - idler 1 3 C BRACKET - idler spring BOLT - 3/8" X 2" NC hex, ZP LOCKWASHER - 3/8" ZP NUT - 3/8" NC hex, ZP 1 7 C SPRING - idler 1 8* C SPACER - idler arm 1 9* WASHER - 3/8" plain 2 10* BOLT - 5/16" x 1-3/4" NC hex NUT - 5/16" NC h^x, ZP LOCKWASHER - 5/16" ZP WASHER - 5/16" ZP 3 14 C PULLEY - engine drive 2 15 T KEY - 1/4" x 2" square SCREW - set 5/16" x 1/4" socket head 2 17 C BELT - engine drive 1 18 C BELT - PTO drive 1 19 C FINGER - PTO belt BOLT - 5/16" x 3/4" NC hex, ZP 2 *Refer to pages 30 and 31, Parts indicated are not used if tractor has C modification kit installed. BRAKE ASSEMBLY (117) (use before S/N ) 1 C DRUM - brake KEY - Woodruff # SCREW - set 1/4" x 3/8" NC, socket head 2 4 C BAND - brake assembly BOLT - 5/16" x 3/4" NC hex LOCKWASHER - 5/16" NUT - 5/16" NC hex 10 8 C BRACKET - reinforcement 1 9 C BRACKET - friction control SCREW - 1/4" X 1/2" NC hex head, ZP LOCKWASHER - 1/4" ZP NUT - 1/4" NC hex, ZP 2 13 C SPRING - brake NUT - jam lock, 1/2" NC hex 1 15 C ROD - brake PIN - cotter 1/8" x 3/4" WASHER - 5/16" ZP 1 18 C ROD - extension 1 19 C BUTTON - nylon friction 1 20 C PEDAL - brake 1 21 C BRACKET - saddle PIN - roh 3/16" x 3/4" 1 23 C BRACKET - brake lock NUT - lock 5/lB" NC hex 1 25 C LEVER - brake lock 1 26 C KNOB - brake lever PIN - cotter 3/32" x 3/4" WASHER - 1/4" ZP 2 29 C PAD - foot rest R.H 1 30 C PAD - foot rest L.H WASHER - 5/8" ZP PIN - cotter 1/8" x 1" 2 Printed in U.S.A. June 1981

32

33 CASE MODEL 107 AND 117 COMPACT TRACTORS 31 C MODIFICATION KIT (117) (USED PRIOR TO S/N ) REF. PART NO. 1 C C C C c c C c C C DESCRIPTION BRACKET - idler BOLT - 5/16" X 3-1/4" NC hex, grade 8 WASHER - special LOCKNUT - 5/16" NC hex BUSHING - bronze SLEEVE- inner PULLEY - idler BRACKET - spring BOLT - 3/8" X 2" NC hex LOCKWASHER - 3/8" WASHER - 5/16" NUT - 3/8" NC hex BELT - drive PIN - clevis 5/16" x 3-3/16" (see page 49) PIN - cotter STRIP - long STRIP - short LOCKWASHER - 3/16" internal NUT - 5 X 40 NC hex WASHER - 3/16" REQ'D 10 3 Printed in U.S.A. June 1981

34

35 CASE MODEL 107 AND 117 COMPACT TRACTORS 3 3 BELTS, PULLEYS AND IDLERS (117) (use S/N and after) REF. PART NO. DESCRIPTION REQ'D 1 C PULLEY - transmission 1 2 C BELT - drive 1 3 C PULLEY - idler, f l a t BOLT - 3/8" X 2" NC hex 1 5 C KEEPER - belt WASHER - 3/ LOCKNUT - 3/8" NC hex 4 8 C PULLEY - idler 1 9 C BUSHING - idler p u l l e y WASHER - 3 / 8 " 5 11 C PULLEY - idler, flat 1 12 C ARM - clutch idler 1 13 C BEARING - s l e e v e 1 14 C SPRING - idler 1 15 C BRACKET - spring, idler 1 16 C KEEPER - belt BOLT - 5/16" x 3/4" NC h e x 1 18 C WASHER - 5 / LOCKWASHER - 5 / 1 6 " NUT - 5/16" NC hex 1 21 C PULLEY - engine, drive 1 22 C PULLEY - engine, PTO d r i v e 1 23 C BRACKET - saddle 1 24 T KEY - 1/4" square x 2" long SETSCREW - 5/16" x 3/8" NC socket head 2 BRAKE ASSEMBLY (117) (use S/N and after) REF. PART NO. DESCRIPTION REQ'D 1 C DRUM - brake KEY - Woodruff # SETSCREW - 5/16" x 3/8" NC hex socket 2 4 C BAND - brake assembly BOLT - 5/16" x 3/4" NC hex LOCKWASHER - 5/16" NUT - 5/16" NC hex 5 8 C ROD - brake 1 9 L SPRING - brake return PIN - cotter 3/32" x 3/4" LOCKNUT - 5/16" NC hex 1 12 C SPRING - brake 1 13 C PEDAL ASSEMBLY - brake 1 14 C BRACKET - saddle PIN - rou 1 16 C LOCK - clutch and brake 1 17 C LATCH - brake LOCKNUT - 5/16" NC hex 1 19 C LEVER - brake latch 1 20 C KNOB - brake latch PIN - cotter 3/32" X 3/4" WASHER - 1/4" WASHER - 5/16" 2 24 C PAD - footrest R. H. short 1 25 C PAD - footrest L. H. long WASHER - 5/8" PIN - cotter 1/8" X 1" 2 Printed in U.S.A. June 1981

36 34

37 CASE MODEL 107 AND 117 COMPACT TRACTORS 3 5 BRAKE ASSEMBLY (107) (use before S/N ) REF. PART NO. DESCRIPTION REQ'D 1 C DRUM - brake KEY - Woodruff # SCREW - set 1/4" x 3/8" socket tiead 2 4 C BAND - brake assembly BOLT - 5/16" x 3/4" NC hex, ZP LOCKWASHER - 5/16" ZP NUT - 5/16" NC hex, ZP 17 8 C BRACKET - reinforcement 1 9 C ROD - brake, rear PIN - cotter 1/8" x 3/4" WASHER - 5/16" ZP 3 12 C ROD - brake, front 1 13 C PEDAL - brake 1 14 C BRACKET - saddle PIN - rou 3/16" x 3/4" 2 16 C BRACKET - brake lock NUT - lock 5/16" NC hex, ZP 1 18 C LEVER - brake lock 1 19 C KNOB - brake lever PIN - cotter 3/32" x 3/4" ZP WASHER - 1/4" ZP 2 22 C ROD - brake pivot assembly 1 23 C ARM - idler puhey 1 24 C PULLEY - idler 1 25 C ARM - idler PIN - cotter 3/32" x 3/4" BOLT - 3/8" X 2" NC hex, ZP WASHER - 3/8" ZP LOCKWASHER - 3/8" ZP NUT - 3/8" NC hex ZP 1 31 C BRACKET - transaxle pulley BOLT - 5/16" X 1" NC hex, ZP 4 33 C PULLEY - transaxle driven 1 34 C BEARING - needle 2 35 A WASHER - spacer 6 36 A RING - retaining 1 37 C SPRING - idler arm 1 38 C BRACKET - idler spring 1 39 C PAD - foot rest R,H C PAD - foot rest L.H WASHER - 5/8" ZP PIN - cotter 1/8" x 1" 2 Printed in U.S.A, June 1981

38 36

39 CASE MODEL 107 AND 117 COMPACT TRACTORS 3 7 CLUTCH AND BRAKE ASSEMBLY (107) (use S/N and after) REF. PART NO. DESCRIPTION REQ'D 1 C DRUM - brake KEY - Woodruff # SETSCREW - 5/16" x 3/8" NC socket head 2 4 C BAND - brake BOLT - 5/16" X 3/4" NC hex LOCKWASHER - 5/16" NUT - 5/16" NC hex 13 8 C ROD - brake, rear 1 9 C ROD - brake, front 1 10 L SPRING - brake return PIN - cotter 3/32" x 3/4" WASHER - 5/16" LOCKNUT - 5/16" NC hex 3 14 C PEDAL ASSEMBLY - brake 1 15 C BRACKET - saddle PIN - roh 3/16" X 3/4" 2 17 C LATCH - brake LOCKNUT - 5/16" NC hex 1 19 C LEVER - brake latch 1 20 C KNOB - brake latch PIN - cotter 3/32" x 3/4" WASHER-1/4" 2 23 C CROSS SHAFT - clutch and brake 1 24 C ARM - clutch idler 1 25 C KEEPER - belt 1 26 C PULLEY - clutch idler BOLT - 3/8" X 2" NC hex WASHER - 3/8" LOCKWASHER - 3/8" NUT - 3/8" NC hex 1 31 C BRACKET - pulley BOLT - 5/16" x 1" NC hex 4 33 C PULLEY - transaxle drive 1 34 C BEARING - needle 2 35 A WASHER - spacer 6 36 A RING - retaining 1 37 C SPRING - clutch 1 38 C PAD - foot rest R. H., short 1 39 C PAD - foot rest L. H., long WASHER - 5/8" PIN - cotter 1/8" x 1" 2 Printed in U.S.A. June 1981

40 3 8

41 CASE MODEL 107 AND 117 COMPACT TRACTORS 3 9 HYDRAULIC TRANSMISSION AND CONTROLS (117) REF. PART NO. 1 C C C C C C C C C C C C C C A C C C C C C C c C D ESC RIPTION R EQ' D TRANSMISSION - hydraulic (includes items 2, 3, 4, and 5) 1 GEAR - drive 1 SPACER 1 RING - retaining 1 KEY - Woodruff #3 3 PULLEY - transmission 1 WASHER - 5/16" plain 1 LOCKWASHER - 1/4" 1 BOLT - 1/4" X 5/8" NC hex, ZP 1 FAN - transmission 5 BOLT - 3/8" X 3" NC hex, ZP 4 LOCKWASHER - 3/8" ZP 6 GASKET - transmission TANK - surge CAP - tank HOSE - tank to transmission CLAMP - hose PLATE - mounting BOLT - 5/16" X 3/4" NC hex, ZP LOCKWASHER - 5/16" ZP NUT - 5/16" NC hex, ZP SCREEN PIN - roll 1/8" X 3/8" SCREW - #10 x 3/8" self tap ROD - speed control KNOB - speed control SPRING BUSHING - flip lock CABLE - speed control NUT - 5/16" NF hex, jam WIRE - speed control cable BRACKET - hydraulic control LEVER - speed control SWIVEL - wire 2 WASHER - svjivel 2 SCREW - #8 X 3/8" fillister head 2 PANEL - friction 1 BOLT - 3/8" X 3/4" NC hex, ZP 1 LOCKWASHER - 3/8" ZP 1 NUT - 3/8" NC hex, ZP 2 SCREW - set 1/4" x 3/8" NC, socket head 2 Printed in U.S.A. June 1981

42

43 CASE MODEL 107 AND 117 COMPACT TRACTORS 41 HYDRAULIC TRANSMISSION AND CONTROLS (117) (use S/N and after) REF. DESCRIPTION REQ 1 NSS TRANSMISSION - hydraulic (early production) order items 2 C c c C C C A C c c C C c C A C C C C C C C TRANSMISSION - hydraulic (late production) C C c Printed in U.S.A. June 1981

44 42

45 CASE MODEL 107 AND 117 COMPACT TRACTORS 43 DIFFERENTIAL AND FINAL DRIVE (117) REF, PART NO. 1 C C c c c c c c c F c c C c c c c c c c c c c c c c c c c F C DESCRIPTION REQ'D PINION - bevel 2 GEAR - bevel 2 PIN - drive 1 BLOCK - drive 2 CARRIER - differential 1 CARRIER - differential 1 GEAR - ring 1 AXLE - L. H. 1 AXLE - R. H. 1 BEARING - thrust 2 WASHER - thrust 8 RING - retaining 1 BOLT - 1/4" X 2-1/4" NC hex 4 LOCKWASHER - 1/4 4 HOUSING - differential 1 BEARING - needle 2 BEARING - needle 1 COVER - differential housing 1 BEARING - needle (see Ref. 16) 1 BEARING - needle 1 HOUSING AND BUSHING ASSEMBLY - L. H. 1 BUSHING 2 HOUSING AND BUSHING ASSEMBLY - R. H. 1 BUSHING - (see Ref. 21) 2 SHAFT - brake 1 GASKET - housing to cover i GEAR - output 1 GEAR - idler i SHAFT - output 1 SPACER 1 WASHER 1 WASHER 1 SEAL - oil 2 PIN - dowel 2 SCREW - 1/4" X 1" NC hex head, self-tapping 10 PLUG - oil filler and drain 2 BOLT - "U" 5/16" 2 LOCKWASHER - 5/16" ZP 4 NUT - 5/16" NC hex, ZP 4 Printed in U.S.A. June 1981

46

47 CASE MODEL 107 AND 117 COMPACT TRACTORS 45 TRANSMISSION AND FINAL DRIVE (107) REF, PART NO, 1 NSS 2 A C C c c c C c c c c c c C C c c c c A C c c c c c c c c c c c c c D ESC RIPTION R EQ' D LEVER AND HOUSING ASSEMBLY RING - retaining RING - quad PIN - roll HOUSING - shift lever KEEPER - shift lever LEVER - shift ROD ASSEMBLY - shift (includes items 9, 10, 11, 12 and 56)... SPRING 2 BALL - steel 2 FORK - shifter 2 ROD - shifter ROD ASSEMBLY - shilt (includes items 9, 10, 11, 14 and 56). ROD - shifter AXLE - L. H AXLE - R. H WASHER - thrust 8 BOLT - 1/4" X 2-1/4" NC hex 4 LOCKWASHER - 1/4" 4 GEAR - ring, PIN - drive BLOCK - drive PINION - bevel PINION AND BUSHING ASSEMBLY - idler SHAFT AND BEARING ASSEMBLY - shifter BEARING GEAR - idler SHAFT - idler STOP - shifter GASKET - housing to cover GASKET - shift lever housing GEAR - shifting GEAR - shifting GEAR - spur 26T SPACER GEAR - spur 22T SPACER GEAR - spur 16T SHAFT - input GEAR - spur, input shaft Printed in U,S.A, June 1981

48 A6

49 CASE MODEL 107 AND 117 COMPACT TRACTORS 47 TRANSMISSION AND FINAL DRIVE (CONT) (107) REF. PART NO. 41 C C c c c c c c c F C C c A C c A C C C C F C c c c DESCRIPTION REQ'D WASHER 1 SPACER GEAR - output PINION - output SEAL - oil HOUSING AND BUSHING ASSEMBLY - L. H. (includes item 52) HOUSING AND BUSHING ASSEMBLY - R. H. (includes item 52) COVER ASSEMBLY - (includes items 58 and 59) HOUSING ASSEMBLY - (includes items 58 and 59) SCREW - 1/4" X 3/4" socket head PIN - dowel BUSHING PLUG - pipe, filler and drain GEAR - bevel RING - retaining RING - retaining BEARING BEARING BEARING SEAL - ou SHAFT - reverse idler SPACER - reverse idler IDLER - reverse BEARING - thrust CARREER - differential CARRIER - differential KNOB - shift lever BOLT - "U" 5/16" 2 LOCKWASHER - 5/16" ZP 4 NUT - 5/16" NC hex, ZP 4 Printed in U.S.A. June 1981

50

51 CASE MODEL 107 AND 117 COMPACT TRACTORS 49 ATTACHMENT DRIVE POWER TAKE OFF (PTO) ASSEMBLY IMPLEMENT LIFT REF. PART NO. 1 C C C C c A C C C C C C C C C C C C C DESCRIPTION REQ'D HOUSING - PTO (use S/N and after) - HOUSING - PTO (use before S/N ) PULLEY - PTO bottom PULLEY ASSEMBLY - PTO top WASHER - plain - BEARING - PTO WASHER - bell BOLT - 3/8" X 3/4" NC hex, ZP LOCKWASHER - 3/8" ZP WASHER - 3/8" plain, ZP PIN - pivot PIN - cotter 1/8" x 3/4" ROD - belt adjust front SLEEVE SPRING WASHER - 3/8" plain NUT - jam 3/8" NC hex PIN - roll 3/16" X 3/4" ROD - PTO rear (used prior to S/N ) ROD - PTO, rear (used S/N and after) LEVER - engaging (used S/N to S/N ).. LEVER - engaging (used S/N and after). LEVER - engaging (use before S/N ) PIN - cotter 1/8" x 3/4" SPACER SCREW - 5/16" X 1" truss head, ZP LOCKWASHER - 5/16" ZP NUT - 5/16" NC hex, ZP BELT - PTO KEEPER - belt 2 BOLT - 5/16" X 3/4" NC hex 2 WASHER - 5/16" 2 LOCKWASHER - 5/16" 2 NUT - 5/16" NC hex 2 BOLT - 5/16" X 3-1/2" (early production) 1 NUT - lock 5/16" (early production) 1 IMPLEMENT LIFT 1 C LEVER-implement lift (117) 1 1 C LEVER - implement lift (107) 1 2 C ROD - push 1 3 C BUTTON - thumb 1 4 C BRACKET - saddle BOLT - 5/16" x 3/4" NC hex, ZP LOCKWASHER - 5/16" ZP NUT - 5/16" NC hex, ZP PIN - roh 3/16" x 3/4" C SPRING PIN - spirol 5/16" x 1-3/4" WASHER - 5/16" plain 1 Printed in U.S.A. June 1981

52 50

53 CASE MODEL 107 AND 117 COMPACT TRACTORS 51 BREAKER CONTACTS, MAGNETO AND ALTERNATOR REF, PART NO. DESCRIPTION REQ 1 C C c c c c c c C C C COIL ASSEMBLY - magneto (includes items 12, 14 and 18) c c c c c c c c c c C Printed in U.S.A. June 1981

54 52

55 CASE MODEL 107 AND 117 COMPACT TRACTORS 53 C STARTER REF, PART NO. DESCRIPTION REQ'D C STARTER - engine 12 volt 1 1 C CAP ASSEMBLY - end (includes bearing) 1 2 C WASHER - spacer (.024) 2 2 C WASHER - spacer (.008) 2 3 C ARMATURE 1 4 C HOUSING - starter 1 5 C WASHER - insulating 2 6 C WASHER - plain LOCKWASHER 4 8 C NUT 4 9 C WASHER - spacer 1 10 C BOLT - thru 2 11 C WASHER 2 12 C BUSHING - insulating 1 13 C BRUSH AND SPRING KIT I 14 C SPRING - brush 2 15 C CAP ASSEMBLY - commuutor end 1 16 C BENDIX ASSEMBLY 1 27 C WASHER - thrust 28 C BOLT - terminal.. «i Printed in U.S.A. June 1981

56 54

57 CASE MODEL 107 AND 117 COMPACT TRACTORS 55 REF. PART NO. 1 C c c c c c c c c c c c c c c NSS 14 c c ELECTRICAL SYSTEM USED PRIOR TO S/N DESCRIPTION BATTERY - 12 volt HARNESS - wire SOLENOID - start PLATE - rectifier mounting WIRE - battery to solenoid mounting screw (late production) CABLE - battery negative O^lack 12") WIRE - neutral start switch SWITCH - strip, neutral start STARTER - 12 volt (repairs page 53) CABLE - battery positive (red 10-1/2") SWITCH - ignition (used S/N and after) KIT - ignition switch (used prior to S/N )... WIRE - ground KEY - ignition DECAL - ignition switch (see page 57) SWITCH - ignition (use item 11) KEY - ignition SWITCH - neutral start (117 early production) REQ'D 1 C C c c c c C C C U C C C c c c ELECTRICAL SYSTEM USED S/N AND AFTER BATTERY - 12 volt HARNESS - wire SOLENOID - start PLATE - rectifier mounting WIRE - battery to solenoid mounting screw CABLE - battery negative (black 12").... FUSE - 20 amp SWITCH - strip, neutral start STARTER - 12 volt (repairs page 53).... CABLE - battery positive (red 10-1/2"). SWITCH - ignition (includes key) KEY - ignition WIRE - ground, switch WIRE - PTO switch to solenoid SWITCH - strip, PTO WIRE - switch to switch Printed in U.S.A. June 1981

58

59 CASE MODEL 107 AND 117 COMPACT TRACTORS 57 ELECTRICAL SYSTEM HARDWARE REF. PART NO. DESCRIPTION REQ'D 1 C NUT - back up 1 2 C WASHER - ignition switch 1 3 C NUT - escutcheon 1 4 C NUT - speed SCREW - #10 x 1/2" self-tapping LOCKWASHER - #10 external tooth BOLT - 5/16" x 3/4" NC round head, square neck NUT - 5/16" NC hex BOLT - 1/4" x 3/4" NC round head, square neck NUT - 1/4" NC hex NUT - 5/16" NF hex LOCKWASHER - 5/16" NUT - #10 NC hex brass LOCKWASHER- 3/16" 2 15 C BOLT - #10 x 5/8" NC nylon 3 16 C WASHER - 3/16" nylon 2 17 C NUT - #10 NC hex nylon 3 18 C RECTIFIER - diode FUSE - 6 amp 1 20 C COVER - rectifier SCREW - #5 x 3/8" round head machine 1 22 C CLIP - insulated NUT - crown 1 C CLIP-"J" wire 1 DECALS 1 C DECAL - hood (R.H.)(117) 1 1 C DECAL - hood R.H. (107) 1 2 C DECAL-hood L.H. (107) 1 2 C DECAL - hood (L.H.)(117) DECAL - instrument panel(used S/N to S/N ) (117) DECAL - instrument panel (used S/N and after) (117) C DECAL - instrument panel (117) (use before S/N ) 1 3 C DECAL - instrument panel (107) (use before S/N ) DECAL - instrument panel (107) (use S/N to S/N ) DECAL-instrument panel (107) (use S/N and after) 1 4 C DECAL - griue insert 1 5 C DECAL - PTO (used prior to S/N ) 1 5 C DECAL - PTO (used S/N and after) DECAL - brake lock DECAL-"CASE" 1 8 C DECAL - ignition switch (used with C17809 ignition switch kit). 1 9 C DECAL - air scoop (early production) 1 Printed in U.S.A. June 1981

60 0 - ^

61 CASE MODEL 107 AND 117 COMPACT TRACTORS 59 HEAD LAMP KIT (OPTIONAL) REF. PART NO. DESCRIPTION REQ'D C NSS KIT - head lamp (order as G6 machinery item) 1 1 C WIRE ASSEMBLY 1 2 C CONNECTOR - head lamp 1 3 C HEAD LAMP 2 HEAD LAMP NUT - speed SCREW - #8 x 1/2" round head, PhiUips, self-tapping 4 C HEAD LAMP ASSEMBLY 2 3 NSS RECEPTACLE - head lamp (order C22571) 1 4 A BULB - head lamp 1 5 C GASKET - head lamp 2 6 C LENS - head lamp 1 Printed in U.S.A. June 1981

62 60 NUMERICAL PARTS IIMDEX PART PAGE REF. PART PAGE REF. PART PAGE REF NO. NO. NO. NO. NO. NO. NO. NO. NO C C A C C A c c A c c A c c A c c A c c A c c A c A c c A c c A " 28 c c A c c A c c A c c C c c C c c C c c C c c C c c C c c C c c C c c C c c C c c C c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c C c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c C' c c

63 NUMERICAL PARTS INDEX 61 PART PAGE REF. PART PAGE REF. PART PAGE REF NO. NO. NO. NO. NO. NO. NO. NO. NO. C C C C C C c C C C c C c c C c C c c C c c C C c C c c C c c C c c C c c c c C c c c c c C c c c c c c c c c c C c c C c c c c c c c c C c c c c c c c c c c c C c c c c c c c C c c c c c c c c c c c c c c c c c c c c C c c c c C C c c c c c c c c c c c c c c c c c C c c c c c c C c c G c c C c c C c C c c c c c c c c c c c c c c c c _ 5 32

64 62 NUMERICAL PARTS INDEX PART PAGE REF. PART PAGE REF. PART PAGE REF. NO. NO. NO. NO. NO. NO. NO. NO. NO. C C C C C C c C C c c C c c C c c C c c C c c C c c C c c C c c C c c C c c C c c C c c c c c C c c C c C C c c c c c C c C C c c c c c c c c C c c c c c c c c c c c c c c C c c C c C C c c C c C c c c c c c c c c c c c c c c c c c c c c c c c c C c c c c c c c c c c c c c c c C c c c c c c c c c c c c c c C c c C c C c c c C c c C c IB c 13^ c c SI 7A- c c

65 NUMERICAL PARTS INDEX 63 PART PAGE REF. PART PAGE REF. PART PAGE REF. NO. NO. NO. NO. NO. NO. NO. NO. NO. C C C C C C C c C c C c c C c C C C c C c c C c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c D c F c F c F c F c G c L c L c L c AB c T c T c T c T c T c c c HARDWARE CODE NUMBERS c c c c c c c c c c c

66 64 NUMERICAL PARTS INDEX PART PAGE REF. PART PAGE REF. PART PAGE REF. NO. NO. NO. NO. NO. NO. NO. NO. NO a

67 NUMERICAL PARTS INDEX 65 PART PAGE RE NO. NO. NO PART NO. PAGE NO. REF. NO. PART NO. PAGE NO. REF. NO

68 Printed in U.S.A.