TIP SHEET Installation instructions for EVO-NIST1 + LC1

Size: px
Start display at page:

Download "TIP SHEET Installation instructions for EVO-NIST1 + LC1"

Transcription

1 TIP SHEET Installation instructions for EVO-NIST1 + LC1 T3108 NISSAN INFINITY CUBE M JUKE M QUEST Q SENTRA Q70L 2015 VERSA SEDAN QX VERSA NOTE QX *For push-to-start vehicles equipped with NO keyport ONLY* *For automatic transmission vehicles ONLY* -The EVO-ALL interface module uses the vehicle s computer data stream for communication, eliminating most of the wiring traditionally associated with a remote start install. The EVO-NIST1 includes a T harness that is made to provide easy plug in connections for the majority of the installation. There are a LOT of wires in your kit, you will use very few of them. There will only be 3 connections required to be made to your vehicle, plus there is also an OPTIONAL connection for a valet switch (included with your kit), and/or hood pin (for vehicles not equipped from the factory with a hood pin). STEP 1: Flash the EVO-ALL module The EVO-ALL module will need to be flashed with the compatible firmware for your vehicle in order to perform its functions. Your kit includes the flash link updater. This will be used to accomplish both the flashing of your module as well as the DCRYPTOR step (required for transponder programming) done in the final module programming once all you connections have been made. For flashing your EVO-ALL, first you will need to open with your internet browser. At the bottom of the page, click Flash-Link Manager and complete the software installation on your computer. Then, plug the flash link updater into your computers USB port, and plug the 4-pin data link connector from the flash link updater into the EVO-ALL module. The software will automatically detect the Module and bring up a screen that allows you to enter your vehicle info. Once your vehicle info has been entered, click the updates tab at the top of the screen, select the latest recommended firmware version (usually shown in red), then click flash to load the firmware. Once the firmware has been loaded, unplug the EVO-ALL from the flash link updater, and then plug it back in. Now you will be able to select available option by clicking on the options tab at the top. You will need to turn on option D1 OEM remote stand-alone remote starter, option C1 will turn automatically with D1, this is OK. You will have the ability to select a run time from the sub-options menu of D1, if no run time is set, the default is infinite run time. If you have a hybrid vehicle, you will also need to turn on option D4 hybrid mode. Other options are available within this tabs menu, which will allow you to customize the functionality of the system to meet your needs. It is VERY important to remember to click the green save options button either at the top or bottom of the options menu list. To verify that the module accepted the flash and option settings, unplug the EVO-ALL module from the flash link updater and plug it back in, all of the previously selected settings should still be set. Once you are sure the module is flashed accordingly, proceed to the installation of the module in your vehicle. 1 P a g e

2 STEP 2: Starting the installation Need to know where all the components go? See Installer s Tip #1 later in this tip sheet Need to know how to make the wiring connections? See Installer s Tip #2 later in this tip sheet -The bulk of the installation takes place right under the dash on the driver s side. Begin by removing the plastic panel at the bottom of the dash, above where the pedals are for easy access. The panel is held in with both bolts and clips. Be careful not to break the panel especially in cold weather. 2 P a g e

3 STEP 3: Make the connections Locate the needed plugs of the vehicle as shown in the following diagram, and connect the corresponding THAR-NIS1 ( T harness) connectors to their respective locations. Do not turn your ignition power on while these plugs are disconnected. Note that there are going to be 2 unused plugs (female 12-pin, and male 12-pin) from the T harness as shown in the following diagram. 3 P a g e

4 There are two black 4-pin data link plugs from the T harness. The plug without the locking tab on it will connect to the EVO-ALL. The 20-pin connector, and the 5-pin connector from the T harness go to the EVO-ALL. The red 6-pin (RL1) connector from the T harness will be connected to the EVO-ALL. The red 6- pin (RL2) connector will not be used. Make the 4 connections required for your install: 1. Cross-reference the vehicle wire color chart and the plug diagram on the next page to locate pin-47 in the 15-pin plug at the BCM. Test the functionality of the circuit with a multi-meter for verification, this is where you will connect the Pink/Black (-) door pin wire in pin-a15 of the 20- pin plug of the EVO-ALL. The purpose of this connection is to simulate the door being opened after the vehicle has been shut down, so that the vehicle (RAP) retained accessory power circuit for auto lights turns off with the remote starter instead of waiting for a delay which could drain your battery. 2. Cross-reference the vehicle wire color chart and the plug diagram on the next page to locate the needed wire in the connector found attached to the back side of the vehicle push to start button. Test functionality of the circuit with a meter as described in the diagram on the next page for verification. This is where you will connect the White/Black (-) PUSH-TO-START wire in pin-a19 of the 20-pin plug of the EVO-ALL. The purpose of this connection is to simulate the vehicle push to start button being pressed, allowing the vehicle to be remote started and stopped. 3. Cross-reference the vehicle wire color chart on page 1 and the plug diagram on the next page to locate the needed pin and wire color for unlock in the 40-pin plug at the BCM. Test the functionality of the circuit with a multi-meter for verification, this is where you will connect the Green (-) unlock wire in pin-a4 of the 20-pin plug of the EVO-ALL. The purpose of this connection is to unlock your door with the aftermarket DS1 remotes before entering the vehicle when it is running from a remote start. Otherwise the vehicle will shut down when any door is opened. Optional Wiring Connections: 1. Valet Switch Your remote start kit includes a valet switch. While it is not essential to the operation of the remote start, it is a safety device that prevents the starter from accidentally engaging when not desired. Mount the valet switch in the vehicle (see installers tips later in this tip sheet). Connect one wire from the valet switch to the dark blue wire (pin A8) from the EVO-ALL 20-pin connector > and connect the second wire ground. 2. Hood Pin Switch If your vehicle comes with an OEM factory hood pin, the EVO-ALL will automatically monitor it saving you from the need of making any connection. Some base model vehicles may not have come with a factory hood pin. The purpose of the hood pin is to provide the important safety feature of disabling the remote starter from activating while the hood is open. If you are not sure if your vehicle comes equipped with a hood pin, our advice is to not install the hood pin and make the wire connection until you have completed the rest of the install and have tested the system. If your vehicle starts with its hood open, Install the hood pin and make the connection. The following diagram illustrates all of your needed connections. As always, it is the responsibility of the installer to verify all vehicle wiring using the vehicle wiring chart and a multi-meter prior to making any connections: 4 P a g e

5 5 P a g e

6 STEP 4: Programming 6 P a g e

7 STEP 5: Test the system and finish up! Once programming is complete, you should test the system before putting everything back together: Press the start (key) button on your remote 2 times in a row (default) to start the vehicle. 1. The parking lights flash once, return solid, and the ignition/accessory circuits turn on. 2. After a few seconds the starter motor engages. The parking lights and accessories will turn off while cranking. 3. Engine starts and runs. Parking lights and accessory circuits turn back on. 4. Engine will remain running for the programmed run time or until the brake pedal is pressed. If needed, the engine can be turned off with remote by pressing the start (key) button again. 5. If your test was unsuccessful, go back and re-check your wiring and programming. Once you ve completed testing the system, it s time to close it up. -After confirming that everything works properly, cap off or tape the ends of any wires you re not using to avoid grounding or other contact. Now gather up all the wiring and neatly bundle it together using zip ties or electrical tape to prevent the wires from interfering with any of the moving parts under the dash. Find a secure place to put the remote start module and use zip ties to secure it. Replace any interior vehicle panels that were removed to gain access to the needed wires, in reverse order that they were removed. 7 P a g e

8 Installer s Tips: Tip #1 Where Everything Goes 1. Module the wiring for the module is done under the dash on the driver s side, so you ll want to install the module in that general area. Before you start wiring, look for a location where there s some open space that will fit the module. Pay attention to moving parts like the pedals, e-brake and steering column. Be sure to route your wiring away from those areas. 2. LC1 remote starter (controller) mounts with module. 3. Valet Switch (optional) requires a small screw hole. Usually put in the driver s kick panel (that s the area forward of the door), the driver s side of the center console, or the underside of the dash. 4. LED (optional) requires a small screw hole. Usually mounted on the dash in a clearly visible location. Tip #2 How to make your wiring connections It s very important that all your wiring connections be solid and secure. All remote start connections are tap on connections. This means that you do not need to cut the wires in the car. You simply need to tap on to the wires in the car to make your connections. Here are three different ways to do this: Method 1 Solder and tape This is the method preferred by the best professional installers. It makes for the most reliable connections, but it is also the most difficult to do. Sometimes there isn t enough room in the wiring harness to safely solder a wire without damaging adjacent wires, but if you have the soldering skills, go for it. To make a connection, strip back a section of the insulation on the wire in the car. On heavy gauge wires, 1 is about the right amount. On lighter gauge wires, ½ is fine. Strip 1 of insulation off the end of the remote start wire. Tin the bare section of wire in the car. Wrap the remote start wire around the tinned section and then carefully solder it in place. Wrap the splice tightly with electrical tape. 8 P a g e

9 Method 2 Wrap and tape This is the most popular method and is also very reliable. Strip back a section of the insulation on the wire in the car. On heavy gauge wires, 1 is about the right amount. On lighter gauge wires, ½ is fine. Strip 1 of insulation off the end of the remote start wire. Separate the strands of the wire like this: Pass the wire from the remote through the opening as shown below Wrap the remote start wire around both sides of the car wire, then back around itself as shown below Use electrical tape to wrap the connection and secure the wires together. A wire tie will help prevent the tape from unraveling in the future. Method #3 T-Taps T-taps are plastic clips that are squeezed onto the wires in the car. The wire from the remote start goes into the tap and the whole thing is crimped together. T-taps come in different sizes for different size wires. Use yellow t-taps for the larger wires in your main power harness. Red t-taps are good for the smaller wires. Tape and wire tie the connections as shown in the wrap and tape section above that will prevent the t-taps from ever opening up. Using T-Taps Use a pair of pliers to attach the quick-connects to the wires in your car. Hold the quick connect as shown below in Figure 1, then clamp it on to the wire as shown in Figure 2. There is a locking tab at the front of the connector (Figure 3) make sure it is secure and locked in place when you are done. Figure 1 Figure 2 Figure 3 Copyright 2016 Digitel LLC 9 P a g e

TIP SHEET EVO-CHRT6(d) STAND-ALONE ADD-ON REMOTE STARTER

TIP SHEET EVO-CHRT6(d) STAND-ALONE ADD-ON REMOTE STARTER TIP SHEET EVO-CHRT6(d) STAND-ALONE ADD-ON REMOTE STARTER Txxxx -The EVO-ALL data and bypass interface module eliminates the need for many wiring connections associated with traditional remote starter installations

More information

Installation Instructions for Stand Alone Remote Starter (EVO-ALL-THAR-GM2) Firmware: 4.18, OPTION 15. T2362 Rev#1.2 last updated 10/15/13

Installation Instructions for Stand Alone Remote Starter (EVO-ALL-THAR-GM2) Firmware: 4.18, OPTION 15. T2362 Rev#1.2 last updated 10/15/13 Installation Instructions for Stand Alone Remote Starter (EVO-ALL-THAR-GM2) Firmware: 4.18, OPTION 15. T2362 Rev#1.2 last updated 10/15/13 -The new EVO-ALL interface module eliminates the need for a separate

More information

TIP SHEET (EVO-FORT1) 80-bit Add-On Stand-Alone Remote Starter

TIP SHEET (EVO-FORT1) 80-bit Add-On Stand-Alone Remote Starter TIP SHEET (EVO-FORT1) 80-bit Add-On Stand-Alone Remote Starter T2380 *AUTOMATIC TRANSMISSION VEHICLES ONLY* CLICK TO WATCH THE PREPPING HARNESS VIDEO -The EVO-ALL interface module eliminates the need for

More information

Installation Tips - (Crimestopper RS1/RS2) & (Fortin EVO-ALL 5): *regular key & automatic transmission only*

Installation Tips - (Crimestopper RS1/RS2) & (Fortin EVO-ALL 5): *regular key & automatic transmission only* Installation Tips - (Crimestopper RS1/RS2) & (Fortin EVO-ALL 5): TIP SHEET T3385f, T3413f *regular key & automatic transmission only* Thank you for purchasing your remote start from MyPushcart.com - an

More information

Installation Tips for RS4/RS7 + EVO-ALL (NIS 3.c) + 2 diodes

Installation Tips for RS4/RS7 + EVO-ALL (NIS 3.c) + 2 diodes Installation Tips for RS4/RS7 + EVO-ALL (NIS 3.c) + 2 diodes TIP SHEET T3093 + T3103 FOR: NISSAN ( 09-14 Cube), ( 11-14 Juke), & ( 07-11 Versa) automatic, regular key vehicles Thank you for purchasing

More information

RS4/RS7 + ADS-DL (GM2)

RS4/RS7 + ADS-DL (GM2) Installation tips for RS4/RS7 + ADS-DL (GM2) Tip Sheet T2390, T3632 (Chevy Cobalt 2007-2010), (Chevy HHR 2007-2011), (Chevy Malibu 2007-2012), (Chevy Malibu Hybrid 2008-2012), (Chevy Malibu Maxx 2007-2009),

More information

Installation Instructions for the Plug & Play Remote Start Package (EVOCHR5)

Installation Instructions for the Plug & Play Remote Start Package (EVOCHR5) T6018 v1.1 02/2013 Installation Instructions for the Plug & Play Remote Start Package (EVOCHR5) For DODGE Nitro 2007-2011 Review the remote start installation manual for safety instructions! Overview Your

More information

Installation Instructions for the Plug & Play Chrysler/Dodge/Jeep Remote Start Package w/mux T5

Installation Instructions for the Plug & Play Chrysler/Dodge/Jeep Remote Start Package w/mux T5 v1.01 12/14/2102 Installation Instructions for the Plug & Play Chrysler/Dodge/Jeep Remote Start Package w/mux T5 Review the remote start installation manual for safety instructions! Overview Your kit consists

More information

TIP SHEET T2352, T3396. Installation Tips for RS1 + EVO-ALL 1-BUTTON REMOTE STARTER FOR: Acura RDX PUSH-TO-START / AUTOMATIC

TIP SHEET T2352, T3396. Installation Tips for RS1 + EVO-ALL 1-BUTTON REMOTE STARTER FOR: Acura RDX PUSH-TO-START / AUTOMATIC Installation Tips for RS1 + EVO-ALL 1-BUTTON REMOTE STARTER FOR: Acura RDX 2013-2015 PUSH-TO-START / AUTOMATIC TIP SHEET T2352, T3396 Thank you for purchasing your remote start from MyPushcart.com - an

More information

TIP SHEET (EVO-FORT1) 80-bit Add-On Stand-Alone Remote Starter

TIP SHEET (EVO-FORT1) 80-bit Add-On Stand-Alone Remote Starter TIP SHEET (EVO-FORT1) 80-bit Add-On Stand-Alone Remote Starter T2380 *AUTOMATIC TRANSMISSION VEHICLES ONLY* PREPPING HARNESS VIDEO: https://www.youtube.com/watch?v=favdjn2gsxs INSTALL VIDEO: https://www.youtube.com/watch?v=9bp7ncnggya

More information

Installation Tips for RS4/RS7 + EVO-ALL (NIS 3.b)

Installation Tips for RS4/RS7 + EVO-ALL (NIS 3.b) Installation Tips for RS4/RS7 + EVO-ALL (NIS 3.b) TIP SHEET T3092 + T3102 FOR: NISSAN ( 08-14 Frontier), ( 08-12 Pathfinder), & ( 08-12 Xterra) Thank you for purchasing your remote start from MyPushcart.com

More information

Installation Instructions for the Plug & Play Remote Start Package (EVOCHR4)

Installation Instructions for the Plug & Play Remote Start Package (EVOCHR4) T6002 v1.1 02/2013 Installation Instructions for the Plug & Play Remote Start Package (EVOCHR4) For CHRYSLER Town & Country 2008-2012 Review the remote start installation manual for safety instructions!

More information

Installation Tips for your RS-1 + Honda-SL3 (1.b) Remote starter Honda: ( FIT), ( Pilot), ( Ridgeline) Acura: ( MDX)

Installation Tips for your RS-1 + Honda-SL3 (1.b) Remote starter Honda: ( FIT), ( Pilot), ( Ridgeline) Acura: ( MDX) Installation Tips for your RS-1 + Honda-SL3 (1.b) Remote starter Honda: ( 06-08 FIT), ( 05-08 Pilot), ( 06-13 Ridgeline) Acura: ( 03-06 MDX) TIP SHEET T0777 Thank you for purchasing your remote start from

More information

Installation Tips for your GM Plug and Play Remote Start Kit EVOGM1 STAND ALONE v1.0 11/27/2013

Installation Tips for your GM Plug and Play Remote Start Kit EVOGM1 STAND ALONE v1.0 11/27/2013 Installation Tips for your GM Plug and Play Remote Start Kit EVOGM1 STAND ALONE v1.0 11/27/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts

More information

TIP SHEET. Installation Tips for your RS IB-MUX / PKUMUX (D) + SPDT T1205 v1.2 4/3/14. 1 P a g e

TIP SHEET. Installation Tips for your RS IB-MUX / PKUMUX (D) + SPDT T1205 v1.2 4/3/14. 1 P a g e Installation Tips for your RS-150 + IB-MUX / PKUMUX (D) + SPDT T1205 v1.2 4/3/14 TIP SHEET Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts

More information

RS4 / RS7 + (4) + SPDT

RS4 / RS7 + (4) + SPDT TIP SHEET Installation Tips for RS4 / RS7 + Honda-SL3 (4) + SPDT + Diode x2 T0776, T0731 Honda: ( 08-12 Accord), ( 12-13 Civic), 12-13 CRV), ( 11-13 Odyssey), ( 09-13 Pilot) Acura: ( 09-13 TSX) Thank you

More information

TIP SHEET. Installation Tips for SP-404/SP EVO-ALL + SPDT Remote Start/Alarm T1642

TIP SHEET. Installation Tips for SP-404/SP EVO-ALL + SPDT Remote Start/Alarm T1642 TIP SHEET Installation Tips for SP-404/SP-502 + EVO-ALL + SPDT Remote Start/Alarm T1642 Nissan Armada: 2008-2012 Nissan Cube: 2009-2012 Nissan Frontier: 2008-2012 Nissan Pathfinder: 2009-2012 Nissan Quest:

More information

RS4/RS7 + + SPDT T0776,T0731

RS4/RS7 + + SPDT T0776,T0731 TIP SHEET Installation Tips for your RS4/RS7 + Honda-SL3 (1.a) + SPDT T0776,T0731 Honda: ( 03-07 Accord),( 01-05 Civic),( 02-06 CRV),( 03-10 Element),( 05-10 Odyssey) Acura: ( 01-03 EL),( 02-06 RSX),(

More information

Installation Tips For Crimestopper RS7 + Passlock-sl2(4) + DLRM + SPDT

Installation Tips For Crimestopper RS7 + Passlock-sl2(4) + DLRM + SPDT TIP SHEET T3628 Installation Tips For Crimestopper RS7 + Passlock-sl2(4) + DLRM + SPDT For Chevrolet: Astro 1998-2005, Avalanche 2002, Blazer 1998-2005, Cavalier 2000-2003, Express Van 1998-2005, S10 Pickup

More information

Installation Tips for RS1 + EVO-RIDE + SPDT. *(reglar key, automatic transmission vehicles ONLY)*

Installation Tips for RS1 + EVO-RIDE + SPDT. *(reglar key, automatic transmission vehicles ONLY)* Installation Tips for RS1 + EVO-RIDE + SPDT TIP SHEET T1235 *(reglar key, automatic transmission vehicles ONLY)* Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing

More information

TIP SHEET T0937. Installation Tips For RS00/PS00 + ADS-TBSL-PL + SPDT

TIP SHEET T0937. Installation Tips For RS00/PS00 + ADS-TBSL-PL + SPDT Installation Tips For RS00/PS00 + ADS-TBSL-PL + SPDT TIP SHEET T0937 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to do-it-yourself installers

More information

Installation Tips for your Remote Start/Keyless Entry (for Honda/Acura Vehicles) [EVO-ALL] v1.02 updated 9/13/2013

Installation Tips for your Remote Start/Keyless Entry (for Honda/Acura Vehicles) [EVO-ALL] v1.02 updated 9/13/2013 Installation Tips for your Remote Start/Keyless Entry (for Honda/Acura Vehicles) [EVO-ALL] v1.02 updated 9/13/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in

More information

Remote Start Kit for GM Installation RS1/3/4/7 + ADS-DL Tip Sheet

Remote Start Kit for GM Installation RS1/3/4/7 + ADS-DL Tip Sheet Remote Start Kit for GM Installation RS1/3/4/7 + ADS-DL Tip Sheet rev 1.4 12/16/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to do-it-yourself

More information

TIP SHEET T0937. Installation Tips for RS00 + Passlock-sl2(4) + SPDT

TIP SHEET T0937. Installation Tips for RS00 + Passlock-sl2(4) + SPDT Installation Tips for RS00 + Passlock-sl2(4) + SPDT TIP SHEET T0937 Chevrolet (Astro 1998-2005) (Avalanche 2002-2006) (Blazer 1998-2005) (Express Van 1998-2007) (Impala 2000-2005) (Monte Carlo 2000-2005)

More information

TIP SHEET T0491. Installation Tips for your Excalibur RS Passlock-sl2(4) + DLRC + SPDT

TIP SHEET T0491. Installation Tips for your Excalibur RS Passlock-sl2(4) + DLRC + SPDT TIP SHEET T0491 Installation Tips for your Excalibur RS-360 + Passlock-sl2(4) + DLRC + SPDT For Chevrolet: Astro 1998-2005, Avalanche 2002, Blazer 1998-2005, Cavalier 2000-2003, Express Van 1998-2005,

More information

Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013

Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013 Installation Tips for your Crimestopper/ProStart Remote Start system (add-on for GM vehicles) v1.02 updated 1/16/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader

More information

TIP SHEET. Installation Tips for your RS OL-MDB-CH6 (1) (for Jeep vehicles) T1227 v1.0 3/19/14

TIP SHEET. Installation Tips for your RS OL-MDB-CH6 (1) (for Jeep vehicles) T1227 v1.0 3/19/14 TIP SHEET Installation Tips for your RS-360 + OL-MDB-CH6 (1) (for Jeep vehicles) T1227 v1.0 3/19/14 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote

More information

Installation Tips Crimestopper/ProStart Remote Start system + PLJX + DLRM + SPDT (for GM vehicles) T0760 v1.1 updated 2/5/14

Installation Tips Crimestopper/ProStart Remote Start system + PLJX + DLRM + SPDT (for GM vehicles) T0760 v1.1 updated 2/5/14 Installation Tips Crimestopper/ProStart Remote Start system + PLJX + DLRM + SPDT (for GM vehicles) T0760 v1.1 updated 2/5/14 Thank you for purchasing your remote start from MyPushcart.com - an industry

More information

Installation Tips for your Excalibur Remote Start (for Honda and Acura Vehicles) rev 11/28/2012

Installation Tips for your Excalibur Remote Start (for Honda and Acura Vehicles) rev 11/28/2012 Installation Tips for your Excalibur Remote Start (for Honda and Acura Vehicles) rev 11/28/2012 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts

More information

Installation Tips for your Remote Start/Keyless Entry (for Mazda Vehicles) v3.1 Updated 9/22/2012

Installation Tips for your Remote Start/Keyless Entry (for Mazda Vehicles) v3.1 Updated 9/22/2012 Installation Tips for your Remote Start/Keyless Entry (for Mazda Vehicles) v3.1 Updated 9/22/2012 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote

More information

*(reglar key vehicles ONLY)* Read the entire installation manual. There are several safety tips in there to know before you start

*(reglar key vehicles ONLY)* Read the entire installation manual. There are several safety tips in there to know before you start Installation Tips for RS4 + EVO-RIDE + SPDT TIP SHEET T2519 2009-2011 Ford Crown Victoria 2009-2012 Ford E-150 2009 Ford E-150 Econoline Club Wagon 2008-2010 Ford E-250 2010 Ford E-250 Econoline 2010 Ford

More information

RS4-7/PS4-7 + (2) + SPDT T3015, T3053

RS4-7/PS4-7 + (2) + SPDT T3015, T3053 TIP SHEET Installation Tips for your RS4-7/PS4-7 + Honda-SL3 (2) + SPDT T3015, T3053 v1.3 4/25/14 Honda: ( 98-02 Accord), ( 98-01 CRV), ( 98-04 Odyssey), ( 03-04 Pilot) Acura: ( 98-99 EL), ( 98-03 CL),

More information

Installation Tips for your GMDLBP + Excalibur Remote Start system (for GM vehicles) v1.01 updated 10/09/13

Installation Tips for your GMDLBP + Excalibur Remote Start system (for GM vehicles) v1.01 updated 10/09/13 Installation Tips for your GMDLBP + Excalibur Remote Start system (for GM vehicles) v1.01 updated 10/09/13 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing

More information

Installation Tips for your Remote Start system (for RS4LX>GMBP for GM vehicles)

Installation Tips for your Remote Start system (for RS4LX>GMBP for GM vehicles) Installation Tips for your Remote Start system (for RS4LX>GMBP for GM vehicles) Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to doit-yourself

More information

Installation Tips for your Remote Start/Keyless Entry (for Ford Vehicles) v3.3 Updated 1/13/2013

Installation Tips for your Remote Start/Keyless Entry (for Ford Vehicles) v3.3 Updated 1/13/2013 Installation Tips for your Remote Start/Keyless Entry (for Ford Vehicles) v3.3 Updated 1/13/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote

More information

Read the entire installation manual. There are several safety tips there that you need to know before you start

Read the entire installation manual. There are several safety tips there that you need to know before you start Installation Tips for RS4 + INTSL (2) TIP SHEET T0749 Buick Century: 2000-2005 Buick LeSabre: 2000-2005 Buick Park Avenue: 1999-2005 Buick Ranier: 2004-2007 Cadillac Escalade: 2003-2007 Chevrolet Avalanche:

More information

Installation Tips for your Add-on Remote Start (for GM vehicles with INTSL Install 2) v3.2 Updated 11/12/2012

Installation Tips for your Add-on Remote Start (for GM vehicles with INTSL Install 2) v3.2 Updated 11/12/2012 Installation Tips for your Add-on Remote Start (for GM vehicles with INTSL Install 2) v3.2 Updated 11/12/2012 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing

More information

Step 1 Wiring your remote start. Installation Tips for your Remote Start system (for GM vehicles) V3.3 revised 9/12/2013

Step 1 Wiring your remote start. Installation Tips for your Remote Start system (for GM vehicles) V3.3 revised 9/12/2013 Installation Tips for your Remote Start system (for GM vehicles) V3.3 revised 9/12/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to

More information

Installation Tips for your Crimestopper/ProStart Remote Start system (for GM vehicles) v1.01 updated 2/27/2012

Installation Tips for your Crimestopper/ProStart Remote Start system (for GM vehicles) v1.01 updated 2/27/2012 Installation Tips for your Crimestopper/ProStart Remote Start system (for GM vehicles) v1.01 updated 2/27/2012 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing

More information

Installation Tips for your Remote Start system (for Toyota Camry & Prius C, ) Crimestopper RS0+ EVO-ALL T3468 rev#1.

Installation Tips for your Remote Start system (for Toyota Camry & Prius C, ) Crimestopper RS0+ EVO-ALL T3468 rev#1. Installation Tips for your Remote Start system (for Toyota Camry & Prius C, 2012-2014) Crimestopper RS0+ EVO-ALL T3468 rev#1.1 1/22/2015 Thank you for purchasing your remote start from MyPushcart.com -

More information

Installation Tips - (Crimestopper RS00) & (Fortin EVO-ALL) For:

Installation Tips - (Crimestopper RS00) & (Fortin EVO-ALL) For: Installation Tips - (Crimestopper RS00) & (Fortin EVO-ALL) For: TIP SHEET T3612-1a Acura TL 2004-2006 Honda Accord (Gas) 2003-2007 Acura TSX 2004-2008 Honda Accord (Hybrid) 2005-2007 Honda Ridgeline 2006-2013

More information

Installation Tips for your Remote Start w/ Keyless Entry (Toyota Vehicles) v3.2 Updated 3/14/13

Installation Tips for your Remote Start w/ Keyless Entry (Toyota Vehicles) v3.2 Updated 3/14/13 Installation Tips for your Remote Start w/ Keyless Entry (Toyota Vehicles) v3.2 Updated 3/14/13 Thank you for purchasing your remote start from MyPushcart.com an industry leader in providing remote starts

More information

RS OL-MDB-GM1 (GM1) (3) T3125

RS OL-MDB-GM1 (GM1) (3) T3125 TIP SHEET Installation Tips for your RS-351 + OL-MDB-GM1 (GM1) (3) T3125 v1.1 3/13/14 For: (2005-2009 Buick Allure), (2005-2009 Buick LaCrosse), (2000-2005 Buick LeSabre), (2000-2005 Buick Ultra), (1997-2005

More information

TIP SHEET. STEP 1: Starting the installation

TIP SHEET. STEP 1: Starting the installation TIP SHEET Add on Remote Start Kit for Push to Start CRV 2015-2016 Txxxx Thank you for purchasing your remote start from MPC - an industry leader in providing remote starts to do-it-yourself installers

More information

TIP SHEET. Step 1: Prepare the Vehicle

TIP SHEET. Step 1: Prepare the Vehicle TIP SHEET Installation Tips for LC + EVO-CHR4 (C) Remote Start Kit Pre-wired Txxxx Chrysler 300 (2011) Chrysler Town and Country (2011-2015) Dodge RAM (2011-2012) Dodge Challenger (2011-2014) RAM CV (2011-2016)

More information

TIP SHEET. Installation Tips for RS00 + FD-1 (T-harness) + PASS-3 + SPDT T3126 v1.0 5/13/14

TIP SHEET. Installation Tips for RS00 + FD-1 (T-harness) + PASS-3 + SPDT T3126 v1.0 5/13/14 TIP SHEET Installation Tips for RS00 + FD-1 (T-harness) + PASS-3 + SPDT T3126 v1.0 5/13/14 Ford: (2002 Crown Victoria), (2000-2002 Excursion), (1997-2002 Expedition), (1998-2001 Explorer), (1997-2003 F-150),

More information

SP EVO-CHR4 (A)

SP EVO-CHR4 (A) TIP SHEET Installation Tips for SP-502 + EVO-CHR4 (A) Remote Start / Alarm T1630 Chrysler 300 (2008-2011) Dodge Magnum (2008) Chrysler Town and Country (2008-2015) Dodge RAM (2009-2012) Dodge Challenger

More information

TIP SHEET RS + EVO ALL + T Harness Remote Starter for Kia Optima 2016

TIP SHEET RS + EVO ALL + T Harness Remote Starter for Kia Optima 2016 TIP SHEET RS + EVO ALL + T Harness Remote Starter for Kia Optima 2016 Thank you for purchasing your remote start from MPC - an industry leader in providing remote starts to do-it-yourself installers since

More information

Installation Tips for your Remote Start system (for Toyota vehicles) V3.3 revised 1/10/2013

Installation Tips for your Remote Start system (for Toyota vehicles) V3.3 revised 1/10/2013 Installation Tips for your Remote Start system (for Toyota vehicles) V3.3 revised 1/10/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts

More information

Step 1 : Starting the installation

Step 1 : Starting the installation Installation Instructions for GM Remote Start w/ INTSL Interface Pre-wired Review the remote start installation manual for safety instructions! Overview Your kit consists of two modules a remote start

More information

INSTALL GUIDE FLC-NI(RS)-NI6-[FLRSNI5]-EN

INSTALL GUIDE FLC-NI(RS)-NI6-[FLRSNI5]-EN INSTALL GUIDE FLC-NI(RS)-NI-[FLRSNI]-EN DOCUMENT NUMBER REVISION DE 000 FIRMWARE FLC-NI(RS)-NI-[FLRSNI] HARDWARE FLRSNI ACCESSORIES FLPROG (REQUIRED) FLRF// (OPTIONAL) CARLINK ASCL (OPTIONAL) NOTICE The

More information

INSTALL GUIDE OEM-AL(RS)-NI8-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-NI8-[FLCAN]-EN INSTALL GUIDE DOCUMENT NUMBER 5679 REVISION DATE 084 FIRMWARE OEM-AL(RS)-NI8-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products are strictly

More information

install guide OEM-IDS(RS)-BM1-[ADS-BM1]-EN

install guide OEM-IDS(RS)-BM1-[ADS-BM1]-EN install guide Document number 13171 Revision Date 231121 firmware OEM-IDS(RS)-BM1-[ADS-BM1] hardware ADS-BM1 accessories ADS-USB (REQUIRED) NOTICE The manufacturer will accept no responsability for any

More information

Alarms & Remote Start

Alarms & Remote Start Alarms & Remote Start INSTALL GUIDE DOCUMENT NUMBER 5866 REVISION DATE 0607 FIRMWARE OEM-IDS(RS)-BM-[OL-RS-BM] HARDWARE OL-RS-BM ACCESSORIES OL-LOADER (REQUIRED) NOTICE The manufacturer will accept no

More information

INSTALL GUIDE OEM-AL(RS)-NI9-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-NI9-[FLCAN]-EN INSTALL GUIDE DOCUMENT NUMBER 5506 REVISION DATE 08098 FIRMWARE OEM-AL(RS)-NI9-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products are strictly

More information

install guide OEM-IDS(RS)-BM1-[ADS-BM1]-EN

install guide OEM-IDS(RS)-BM1-[ADS-BM1]-EN install guide Document number 9 Revision Date 50 firmware OEM-IDS(RS)-BM-[ADS-BM] hardware ADS-BM accessories ADS-USB (REQUIRED) NOTICE The manufacturer will accept no responsability for any electrical

More information

GM TRUCK BACKUP CAMERA INSTALLATION

GM TRUCK BACKUP CAMERA INSTALLATION GM TRUCK 07-13 BACKUP CAMERA INSTALLATION Thank you for your purchase! These instructions are intended for the do-it-yourselfer who decides to install the camera without professional assistance. Keep in

More information

INSTALL GUIDE IDL-IDS(RS)-BM1-[ADS-BM1]-EN

INSTALL GUIDE IDL-IDS(RS)-BM1-[ADS-BM1]-EN INSTALL GUIDE DOCUMENT NUMBER 577 REVISION DATE 7 FIRMWARE IDL-IDS(RS)-BM-[ADS-BM] HARDWARE ADS-BM ACCESSORIES ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) DIRECTED SMARTSTART & ADS-HRN(RS)-SM (OPTIONAL)

More information

INSTALL GUIDE DIR-IDS(RS)-BM1-[FLRSBM1]-EN

INSTALL GUIDE DIR-IDS(RS)-BM1-[FLRSBM1]-EN INSTALL GUIDE DOCUMENT NUMBER 57 REVISION DATE 7 FIRMWARE DIR-IDS(RS)-BM-[FLRSBM] HARDWARE FLRSBM ACCESSORIES FLPROG (REQUIRED) DIRECTED XL- RF-KIT & ADS-HRN(RS)-XL (OPTIONAL) DIRECTED SMARTSTART & ADS-HRN(RS)-SM

More information

INSTALL GUIDE OL-NI(RS)-NI5-[OL-RS-NI5]-EN

INSTALL GUIDE OL-NI(RS)-NI5-[OL-RS-NI5]-EN INSTALL GUIDE DOCUMENT NUMBER 54560 REVISION DE 201818 FIRMWARE OL-NI(RS)-NI5-[OL-RS-NI5] HARDWARE OL-RS-NI5 ACCESSORIES OL-LOADER (REQUIRED) RF-10/30/50-EDP (OPTIONAL) LINKR (OPTIONAL) TERMS OF USE: Automotive

More information

INSTALL GUIDE AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN

INSTALL GUIDE AKX-IDS(RS)-BZ1B-[ADS-BZ1]-EN INSTALL GUIDE DOCUMENT NUMBER 25893 REVISION DATE 2627 FIRMWARE AKX-IDS(RS)-BZ1B-[ADS-BZ1] HARDWARE ADS-BZ1 ESSORIES ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) DIRECTED SMART & ADS-HRN(RS)-SM (OPTIONAL)

More information

Dodge Ram 09-Current CS-DTR SERIES BACKUP CAMERA INSTALLATION

Dodge Ram 09-Current CS-DTR SERIES BACKUP CAMERA INSTALLATION Dodge Ram 09-Current CS-DTR SERIES BACKUP CAMERA INSTALLATION Thank you for your purchase! These instructions cannot possibly cover every option group for every model year of RAM trucks so you may find

More information

install guide COM-IDS(RS)-BM1-[ADS-BM1]-EN

install guide COM-IDS(RS)-BM1-[ADS-BM1]-EN install guide Document number Revision Date 50 firmware COM-IDS(RS)-BM-[ADS-BM] hardware ADS-BM accessories ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) DRONE MOBILE DR-000 (OPTIONAL) NOTICE The manufacturer

More information

INSTALL GUIDE AKX-IDS(RS)-BM1-[ADS-BM1]-EN

INSTALL GUIDE AKX-IDS(RS)-BM1-[ADS-BM1]-EN INSTALL GUIDE DOCUMENT NUMBER 9 REVISION DATE 7 FIRMWARE AKX-IDS(RS)-BM-[ADS-BM] HARDWARE ADS-BM ACCESSORIES ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) DIRECTED SMARTSTART & ADS-HRN(RS)-SM (OPTIONAL)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Backup Camera Interface (Kit # 9002-7762) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit: Cam T-Harness Plug & Play I/O T-Harness

More information

INSTALL GUIDE FLCI-IDS(RS)-BZ4-[FLRSBZ4]-EN

INSTALL GUIDE FLCI-IDS(RS)-BZ4-[FLRSBZ4]-EN INSTALL GUIDE DOCUMENT NUMBER 58247 REVISION DATE 20190116 FIRMWARE FLCI-IDS(RS)-BZ4-[FLRSBZ4] HARDWARE FLRSBZ4 ACCESSORIES FLPROG (REQUIRED) FLRF1/2/4 (OPTIONAL) MYCAR (OPTIONAL) TERMS OF USE: Automotive

More information

INSTALL GUIDE IDL-IDS(RS)-BZ2B-[ADS-BZ2]-EN

INSTALL GUIDE IDL-IDS(RS)-BZ2B-[ADS-BZ2]-EN INSTALL GUIDE DOCUMENT NUMBER 450 REVISION DATE FIRMWARE IDL-IDS(RS)-BZB-[ADS-BZ] HARDWARE ADS-BZ ESSORIES ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) DIRECTED SMART & ADS-HRN(RS)-SM0 (OPTIONAL) ADS-TOOLS-MB0

More information

Alarms & Remote Start

Alarms & Remote Start Alarms & Remote Start INSTALL GUIDE DOCUMENT NUMBER 80 REVISION DATE 008 FIRMWARE OEM-AL(RS)-VW-[OL-MDB-ALL] HARDWARE OL-MDB-ALL ACCESSORIES OL-LOADER (REQUIRED) NOTICE The manufacturer will accept no

More information

Idle Timer Controller - A-ITC620-A Chevrolet Express/GMC Savana

Idle Timer Controller - A-ITC620-A Chevrolet Express/GMC Savana Introduction An ISO 9001:2015 Registered Company Idle Timer Controller - A-ITC620-A1 2009-2019 Chevrolet Express/GMC Savana Contact InterMotive for additional vehicle applications The A-ITC620-A1 is an

More information

WOT Box Installation Instructions VW / Audi

WOT Box Installation Instructions VW / Audi Connector Pinout Pin Color AWG Name WOT Box Installation Instructions VW / Audi Description 1 Yellow 18 RPM Connect to Fuel Injector Drive Signal or Ignition Control Signal (varies by car model) 2 Black

More information

QUICK INSTALLATION GUIDE

QUICK INSTALLATION GUIDE MANUAL/AUTOMATIC T R A N S M I S S I O N 2 - B U T T O N R E M O T E S T A R T E R W I T H V I R T U A L T A C H S Y S T E M ( A S P R G - 1 0 0 0 C O M P A T I B L E ) QUICK INSTALLATION GUIDE Manual

More information

INSTALLATION GUIDE Table of Contents

INSTALLATION GUIDE Table of Contents CT-3100 Automatic transmission remote engine starter systems. What s included..2 INSTALLATION GUIDE Table of Contents Door lock toggle mode..... 4 Notice...2 Installation points to remember. 2 Features..2

More information

Alarms & Remote Start

Alarms & Remote Start Alarms & Remote Start INSTALL GUIDE DOCUMENT NUMBER 809 REVISION DATE 0608 FIRMWARE COL-AL(RS)-VW6-[OL-MDB-ALL] HARDWARE OL-MDB-ALL ACCESSORIES OL-LOADER (REQUIRED) OMEGA-CARLINK-GPS (OPTIONAL) NOTICE

More information

Splicing Procedures 1

Splicing Procedures 1 Splicing Procedures 1 Page 1 of 9 Copyright Ford 2013 FoMoCo Splicing Procedures 2 Page 2 of 9 Copyright Ford 2013 FoMoCo Splicing Procedures 3 Page 3 of 9 Copyright Ford 2013 FoMoCo Splicing Procedures

More information

Remote Access System Installation

Remote Access System Installation 2013 Taurus Remote Access Remote Access System Installation CONTENTS VEHICLE PREPARATION Hood Switch Installation RMST Module Installation RMU Module Installation GENERAL PROCEDURES Remote Start Activation

More information

Alarms & Remote Start

Alarms & Remote Start Alarms & Remote Start INSTALL GUIDE OEM-AL(RS)-CH0-[OL-MDB-ALL]-EN DOCUMENT NUMBER 990 REVISION DATE 008 FIRMWARE OEM-AL(RS)-CH0-[OL-MDB-ALL] HARDWARE OL-MDB-ALL ACCESSORIES OL-LOADER (REQUIRED) NOTICE

More information

INSTALL GUIDE DIR-CH(RS)-CH8-[FLRSCH10]-EN

INSTALL GUIDE DIR-CH(RS)-CH8-[FLRSCH10]-EN INSTALL GUIDE DOCUMENT NUMBER 870 REVISION DATE 080 FIRMWARE DIR-CH(RS)-CH8-[FLRSCH0] HARDWARE FLRSCH0 ESSORIES FLPROG (REQUIRED) DIRECTED XL-0 RF-KIT & ADS-HRN(RS)-XL0 (OPTIONAL) DIRECTED SMART & ADS-HRN(RS)-SM0

More information

install guide ADS-AL(RS)-FM6-[ADS-ALCA]-EN

install guide ADS-AL(RS)-FM6-[ADS-ALCA]-EN install guide Document number 07 Revision Date 050 firmware ADS-AL(RS)-FM6-[ADS-ALCA] hardware ADS-ALCA accessories ADS-USB (REQUIRED) COMPATIBLE RF-KIT (REQUIRED) NOTICE The manufacturer will accept no

More information

Vehicle Security / Remote Start / Remote Access System Installation

Vehicle Security / Remote Start / Remote Access System Installation 2016-2017 MKC Vehicle Security/Remote Start/Remote Access Vehicle Security / Remote Start / Remote Access System Installation CONTENTS VSS Module Installation Security Indicator LED Mounting RMST Kit Antenna

More information

INSTALL GUIDE OL-HA(RS)-HA6P-[OL-RS-HA6]-EN

INSTALL GUIDE OL-HA(RS)-HA6P-[OL-RS-HA6]-EN INSTALL GUIDE DOCUMENT NUMBER 5699 REVISION DATE 7 FIRMWARE OL-HA(RS)-HA6P-[OL-RS-HA6] HARDWARE OL-RS-HA6 ACCESSORIES OL-LOADER (REQUIRED) RF-0/0/50-EDP (OPTIONAL) LINKR (OPTIONAL) NOTICE The manufacturer

More information

INSTALL GUIDE FLCI-CH(RS)-CH7-[FLRSCH7]-EN

INSTALL GUIDE FLCI-CH(RS)-CH7-[FLRSCH7]-EN INSTALL GUIDE DOCUMENT NUMBER 57668 REVISION DATE FIRMWARE FLCI-CH(RS)-CH7-[FLRSCH7] HARDWARE FLRSCH7 ACCESSORIES FLPROG (REQUIRED) FLRF//4 (OPTIONAL) MYCAR (OPTIONAL) TERMS OF USE: Automotive Data Solutions

More information

Vehicle Security / Remote Start / Remote Access System Installation

Vehicle Security / Remote Start / Remote Access System Installation 2016 Super Duty Vehicle Security/Remote Start/Remote Access Vehicle Security / Remote Start / Remote Access System Installation CONTENTS VEHICLE PREPARATION Hood Switch Installation VSS Module Installation

More information

INSTALL GUIDE OEM-AL(RS)-FM6-[OL-MDB-ALL]-EN

INSTALL GUIDE OEM-AL(RS)-FM6-[OL-MDB-ALL]-EN INSTALL GUIDE DOCUMENT NUMBER 507 REVISION DATE 05 FIRMWARE OEM-AL(RS)-FM6-[OL-MDB-ALL] HARDWARE OL-MDB-ALL ESSORIES OL-LOADER (REQUIRED) NOTICE The manufacturer will accept no responsability for any electrical

More information

INSTALL GUIDE OEM-GM(RS)-GM2-[OL-RS-GM2]-EN

INSTALL GUIDE OEM-GM(RS)-GM2-[OL-RS-GM2]-EN INSTALL GUIDE OEM-GM(RS)-GM-[OL-RS-GM]-EN DOCUMENT NUMBER 0 REVISION DATE 0 FIRMWARE OEM-GM(RS)-GM-[OL-RS-GM] HARDWARE OL-RS-GM ACCESSORIES OL-LOADER (REQUIRED) NOTICE The manufacturer will accept no responsability

More information

Vehicle Security / Remote Start / Remote Access System Installation

Vehicle Security / Remote Start / Remote Access System Installation 2015 Edge Vehicle Security/Remote Start/Remote Access Vehicle Security / Remote Start / Remote Access System Installation CONTENTS VSS Module Installation Security Indicator LED Mounting RMST Kit Antenna

More information

INSTALL GUIDE OEM-CH(RS)-CH8-[FLRSCH10]-EN

INSTALL GUIDE OEM-CH(RS)-CH8-[FLRSCH10]-EN INSTALL GUIDE DOCUMENT NUMBER 58012 REVISION DATE 20190114 FIRMWARE OEM-CH(RS)-CH8-[FLRSCH10] HARDWARE FLRSCH10 ESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products

More information

Vehicle Security / Remote Start / Remote Access System Installation

Vehicle Security / Remote Start / Remote Access System Installation 2016-2017 Edge Vehicle Security/Remote Start/Remote Access Vehicle Security / Remote Start / Remote Access System Installation CONTENTS VSS Module Installation Security Indicator LED Mounting RMST Kit

More information

SCION xb HEADREST DVD RSE Section I Installation Preparation. Part Number: PT

SCION xb HEADREST DVD RSE Section I Installation Preparation. Part Number: PT Section I Installation Preparation Part Number: PT900-52080 Kit Contents Item # Quantity Reqd. Description 1 2 DVD Headrest Unit 2 2 Headrest Extension Cables 3 1 Audio Interface Module 4 1 Audio Interface

More information

INSTALLATION GUIDE OWNER S GUIDE

INSTALLATION GUIDE OWNER S GUIDE INSTALLATION GUIDE OWNER S GUIDE REMOTE STARTER MODEL RS82 CONTENTS System Features... 1 System Components... 1 Required Tools... 1 Technical Assistance... 1 Before You Begin... 1-2 Precautions... 2 Making

More information

An ISO 9001:2008 Registered Company

An ISO 9001:2008 Registered Company An ISO 9001:2008 Registered Company Introduction Engine Monitor System 2009-2018 Ford E Series (EMS501-D) 2008-2010 Ford F250-550 6.2L, 6.8L (EMS506-D) 2011-2016 Ford F250-550 6.2L, 6.8L (EMS507-D) 2017

More information

INSTALL GUIDE OEM-AL(RS)-FM6-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-FM6-[FLCAN]-EN INSTALL GUIDE DOCUMENT NUMBER 53668 REVISION DATE 208098 FIRMWARE OEM-AL(RS)-FM6-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products are strictly

More information

LightSaver. Installation instructions, Classic GMT-800 GM truck/suv. By: BT DieselWorks, LLC. 12/2012

LightSaver. Installation instructions, Classic GMT-800 GM truck/suv. By: BT DieselWorks, LLC. 12/2012 LightSaver Installation instructions, 2001-2002 Classic GMT-800 GM truck/suv By: BT DieselWorks, LLC. 12/2012 First of all, thank-you for purchasing the BT DieselWorks LightSaver smart headlight control

More information

Dash Wiring, Power Module, and Crossmember Installation Instructions

Dash Wiring, Power Module, and Crossmember Installation Instructions Dash Wiring, Power Module, and Crossmember Installation Instructions Please follow these instructions in lieu of those stated in the installation manual while installing. Crossmember Installation Substitute

More information

Idle Timer Controller - A-ITC620-A Chevrolet Express/GMC Savana

Idle Timer Controller - A-ITC620-A Chevrolet Express/GMC Savana An ISO 9001:2008 Registered Company Idle Timer Controller - A-ITC620-A1 2009-2018 Chevrolet Express/GMC Savana Contact InterMotive for additional vehicle applications Introduction The A-ITC620-A1 is an

More information

INSTALL GUIDE OEM-AL(RS)-FM8-[ADS-ALCA]-EN

INSTALL GUIDE OEM-AL(RS)-FM8-[ADS-ALCA]-EN INSTALL GUIDE DOCUMENT NUMBER 979 REVISION DATE 070 FIRMWARE OEM-AL(RS)-FM8-[ADS-ALCA] HARDWARE ADS-ALCA ESSORIES ADS-USB (REQUIRED) NOTICE The manufacturer will accept no responsability for any electrical

More information

Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler)

Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler) Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler) Installation Time: 2.5-3Hrs Tools Required: 7mm Socket & Driver 10mm Socket 10mm Open end wrench Knife / Razor blade Zip-ties Wire Cutters Needle

More information

INSTALL GUIDE OEM-AL(RS)-FM8-[FLCAN]-EN

INSTALL GUIDE OEM-AL(RS)-FM8-[FLCAN]-EN INSTALL GUIDE DOCUMENT NUMBER 53938 REVISION DATE 208098 FIRMWARE OEM-AL(RS)-FM8-[FLCAN] HARDWARE FLCAN ACCESSORIES FLPROG (REQUIRED) TERMS OF USE: Automotive Data Solutions Inc. ( ADS ) products are strictly

More information

AS-1414/ AS-1424 User Guide

AS-1414/ AS-1424 User Guide AUTOMATIC TRANSMISSION MULTI-CHANNEL REMOTE STARTER SYSTEM AS-1414/ AS-1424 User Guide Transmitter Part Number and Module Serial Number...2 Introduction...2 Basic Remote Operation...2 Remote-starting Your

More information

INSTALL GUIDE COM-HA(RS)-HA6P-[FT-HA6-DC]-EN

INSTALL GUIDE COM-HA(RS)-HA6P-[FT-HA6-DC]-EN INSTALL GUIDE DOCUMENT NUMBER 49378 REVISION DATE 20180412 FIRMWARE COM-HA(RS)-HA6P-[FT-HA6-DC] HARDWARE FT-HA6-DC ACCESSORIES ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) DRONE MOBILE DR-2000 (OPTIONAL)

More information

Vehicle Security / Remote Start / Remote Access System Installation

Vehicle Security / Remote Start / Remote Access System Installation 2015 F-150 Vehicle Security/Remote Start/Remote Access Vehicle Security / Remote Start / Remote Access System Installation CONTENTS VSS Module Installation Security Indicator LED Mounting RMST Kit Antenna

More information