Heating and ventilation

Transcription

1 MANUAL CLIMATE CONTROL Note: When Eco program is selected, heating and ventilation settings are automatically adjusted to reduce energy consumption. See 159, ECO PROGRAM. 1. Temperature control: Rotate to adjust. 2. Air distribution: Rotate to direct air flow to the required areas. 3. Blower speed: Rotate to adjust air flow speed through the vents. 4. Seat heaters: Press once to switch on high, twice to switch on medium, and a third time to switch on low. Press a fourth time to switch off. 5. Recirculation: Press briefly to switch on recirculation. Note: The recirculation operation time will vary depending upon the ambient temperature. Press and hold to switch on continuous recirculation. When recirculation is in operation, press briefly to switch off. 6. Heated rear screen: Press to switch on/off. 7. Heated windscreen: Press to switch on/off. 8. Air conditioning: Press to switch on/ off. Note: The amber tell-tale indicators in the switches will illuminate when the function is selected. Note: In low temperatures, it is advisable to close the centre face-level vents, and direct air flow from the outer face-level vents towards the side windows. This will help to keep the windows clear of ice. 90

2 AUTOMATIC CLIMATE CONTROL Note: The Climate control system removes moisture from the air and deposits the excess water beneath the vehicle. Puddles may form, but this is normal and is no cause for concern. Note: The LED indicator lamps, above the switches, will illuminate when the function is selected. Note: When the ECO program is selected, heating and ventilation settings are automatically adjusted to reduce energy consumption. See 159, ECO PROGRAM. 1. Climate: To access the FRONT CLIMATE screen, touch Climate on the HOME menu screen. See 86, TOUCH SCREEN CONTROLS. 2. Front Seats: Touch to select the CLIMATE SEATS settings screen. 3. Rear A/C: Touch to select the settings screen for the third row seats Climate control. See 97, CLIMATE CONTROL FOR THIRD ROW SEATS. 4. Timed Climate: Touch to select the TIMED CLIMATE settings menu. See 94, TIMED CLIMATE. 91

3 5. Touch to switch the Climate control system off. 6. Windscreen air distribution: Touch to switch on/off. 7. Air distribution: Touch the upper (face distribution) or lower (body/feet distribution) area to select. 8. This indicates that the Rear A/C is locked. To access the Rear A/C lock/unlock feature, touch Rear A/C. 9. Sync: Touch to synchronise the driver and front passenger Climate zone settings. 10. Touch to select the SETTINGS pop-up menu, followed by Climate, to view the CLIMATE SETTINGS screen. 11. Heated front seats or Climate front seats: If Heaters front seats are fitted: See 93, HEATED SEATS. If Climate front seats are fitted: Press the switch to select the CLIMATE SEATS settings menu screen. See 94, CLIMATE SEATS. 12. Recirculation: Press for Timed recirculation (the recirculation operation time will vary depending upon the ambient temperature), or press and hold for continuous recirculation. Press again to switch off. Note: Prolonged use at low temperatures may cause the windows to mist. 13. Heated rear screen: Press to switch on/off. 14. Heated front screen: Press to switch on/off. 15.A/C: Press to switch the Air conditioning system on/off. 16. Temperature controls for either the driver or passenger: Rotate to change the temperature. The individual set temperature is displayed in the centre of the controls. 17. Press to switch maximum defrost for the windscreen on/off. 18. Press to select the FRONT CLIMATE screen. 19. Blower speed control: In manual mode, rotate to select the required fan speed for the selected zone/s. The speed selected is indicated by illuminated LEDs. 20. AUTO: Press to switch fully automatic mode on/off. Depending on the specification of the vehicle, the various options for AUTO mode can be set via the CLIMATE SETTINGS menu. 21.MAX A/C: Press to switch the maximum Air conditioning mode on/ off. Note: In low temperatures, it is advisable to close the centre face-level vents, and direct air flow from the outer face-level vents towards the side windows. This will help to keep the windows clear of ice. INSTRUCTIONAL VIDEO CLIMATE SETTINGS To view the CLIMATE SETTINGS menu, select Climate from the GENERAL SETTINGS menu. See 91, AUTOMATIC CLIMATE CONTROL. 92

4 Auto Sensitivity: The air quality sensor, for Automatic recirculation, can be set to Low, Medium or High. Select Off to disable Automatic recirculation. Auto Power: The blower speed for automatic operation can be set to Low, Medium or High. Auto heated screens: The automatic operation of the front and/or the rear heated screens can be enabled/ disabled. Note: Selection of the ECO driving mode may automatically alter some status and settings for these menus (dependent on previous selections). See 159, ECO PROGRAM. AUTOMATIC RECIRCULATION If an air quality sensor is fitted, the Climate control system will monitor exterior air pollution and select recirculation if it reaches a predetermined level. This feature only operates when selected from the CLIMATE SETTINGS menu. Recirculation sensitivity can also be changed in the CLIMATE SETTINGS menu. See 93, AIR QUALITY SENSOR. Pressing the recirculation button will not deactivate automatic recirculation. AIR QUALITY SENSOR The sensitivity of the air quality sensor can be adjusted using the Touch screen: 1. To view the CLIMATE SETTINGS menu, select Climate from the GENERAL SETTINGS menu. 2. Touch the buttons on the screen to increase/decrease sensitivity. To switch off Air quality sensing, touch Off. AIR VENT OPERATION The vents can be opened using the following procedure: 1. To open the vent, rotate the thumb wheel fully upwards, from the bottom (closed) position to the (top) open position. 2. After the vent has been opened using the thumb wheel, the direction control can be used to adjust the direction of air flow. Note: The vent can only be fully closed again using the thumbwheel. The vent can be closed, regardless of the position of the directional control. Do not insert or attach items to the vents, for example, pens, air fresheners, etc. Do not use excessive force while operating the vent control or the thumb wheel. HEATED SEATS Note: Heated seats consume a great amount of battery power. They will only operate when the engine is running. If the Heated seat/s are operating when the ECO program is selected, the Heated seat/s will switch off automatically. The Heated seat/s can be switched on again, but this may affect the vehicle's fuel economy. 93

5 Front Heated Seats Press the relevant Heated front seat button to switch the required Heater seat on at the maximum setting; the 3 LED indicators in the button illuminate. Press a second time to set the Heated front seat at the medium setting; 2 LED indicators illuminate. Press a third time to set the Heated front seat at the lowest setting; 1 LED indicator illuminates. Press a fourth time to switch off. Rear Heated Seats If fitted, the Heated rear seats (nonclimate) are operated using the switches located on the rear of the centre console. Press the relevant Heated rear seat button to switch the required Heated seat on at the maximum setting; the 3 LED indicators in the button illuminate. Press a second time to set the Heated rear seat at the medium setting; 2 LED indicators illuminate. Press a third time to set the Heated rear seat at the lowest setting; 1 LED indicator illuminates. Press a fourth time to switch off. CLIMATE SEATS Note: The Climate seats will only operate when the engine is running. If the Climate seat/s are operating when the ECO program is selected, the Climate seat/s will switch off automatically. The Climate seat/s can be switched on again, but this may affect the vehicle's fuel economy. Press the relevant Climate front seat button to enable. A pop-up menu will appear on the Touch screen. Heated ventilation Touch the up arrow icon to switch heated ventilation on at the maximum setting (3 red bars). Touch the down arrow icon once or twice to reduce the ventilation setting (2 and 1 red bars). Touch the down arrow icon a third time to switch seat ventilation off. Cooled ventilation Touch the down arrow icon to switch cooled ventilation on at the maximum setting (3 blue bars). Touch the up arrow icon once or twice to reduce the ventilation setting (2 and 1 blue bars). Touch the up arrow icon a third time to switch seat ventilation off. Seat zone selection Constant selection of the Seat zone soft key will scroll through 3 choices of seat zone; full seat, cushion, or seatback only. TIMED CLIMATE The Timed climate system, when in operation, provides a comfortable temperature inside the cabin in advance of using the vehicle, or maintains a temperature when leaving the vehicle for a short period of time. The Timed climate system has control options for either timed or manual setting via the Touch screen, or it can be operated remotely by using the Timed climate remote. Dependent on the external ambient temperature, the Timed climate system will automatically choose to draw in fresh air to cool the cabin, or to operate the Auxiliary heater to warm it. 94

6 Also, in low ambient temperatures, the Auxiliary heater helps to boost the temperature of the engine's coolant for improved heater and starting performance. Note: When the heater is operating, exhaust fumes from the heater may be visible exiting from under the front of the vehicle. This is normal and is not a cause for concern. Do not operate the Timed climate system when refuelling the vehicle. Doing so may cause fuel vapours to combust, causing a fire/explosion. Do not operate the Timed climate system while the vehicle is in an enclosed space. Doing so can cause a build up of highly toxic fumes, which may cause unconsciousness or death. Timed climate may not operate, or will switch off automatically, in the following scenarios: If the fuel level is low. If the vehicle s battery charge is low. If the coolant temperature is at, or above, its required temperature. TIMED CLIMATE TOUCH SCREEN CONTROLS The Touch screen can be used to either preset activation times or to operate the system manually. When the system is operating, the LED in the Climate control AUTO button flashes. Note: The system will cease operation if the engine is started. To set a Timed climate program: Select Timed Climate from the FRONT CLIMATE screen or from the EXTRA FEATURES page. Select either 7 Day Timer (1) or Single Event (2). When selected, touch SET (3). 7 Day timer: Select the day, then select the start times (hours and minutes) for each of the 2 settings, using the arrows. These times can also be set for All week. Single Event: Set the start time and touch SET. Note: The time format, 12/24 hour clock, is determined by the time settings currently selected in the SYSTEM SETTINGS menu. See 87, SYSTEM SETTINGS. A current heating cycle will be cancelled if the engine is started. Any programmed heating cycle may be cancelled by touching the relevant soft key (1 or 2) on the timer setup menu. 95

7 TIMED CLIMATE REMOTE CONTROLS The Timed climate remote control has an approximate range of 100 metres. There is no need to point the antenna at the vehicle. 1. ON button. 2. OFF button. 3. LED (operation indicator). 4. Antenna. Note: Avoid touching the antenna when operating the ON or OFF buttons. Press and hold the ON button for approximately 2 seconds. The LED will illuminate to confirm that an automatic heating program has been initiated. The LED flashes once every 2 seconds to indicate that the heater is active. The heating program will continue for minutes, when it will switch off automatically to prevent the vehicle's battery from discharging. It also switches off automatically if the engine is started. The LED indicator signals various states and conditions for the heater as follows: Illuminates red for 2 seconds when the OFF button is pressed, to indicate that the program has stopped. Flashes green or red for 2 seconds then stops when the ON or OFF buttons are pressed, to indicate that no action has been taken. Illuminates orange for 2 seconds before showing green or red, to indicate that the remote battery is low. Flashes orange for 5 seconds to indicate that no action has been taken and the remote battery should be replaced. Additional remotes Extra remote controls can be programmed to operate the heater. A maximum of 3 remote controls can be programmed to each vehicle. Contact a Retailer/ Authorised Repairer to purchase extra remote controls and have them programmed to the vehicle. REPLACING THE REMOTE BATTERIES 96

8 With the back of the remote control facing upwards, use a coin or a similar implement to rotate the battery cover. Lift the cover off to reveal the battery compartment. Remove the old battery and, making sure the correct polarity is maintained, insert a replacement 3.3 volt, CR1/3N battery. Replace the cover and rotate it to lock. Note: Avoid touching the new battery. Moisture/oil from fingers can reduce battery life and corrode the contacts. CLIMATE CONTROL FOR THIRD ROW SEATS The third row seat climate control provides fan controlled chilled air through the rear side vents. Rotate the control to adjust the fan speed. Third row seat climate can also be controlled and switch on/off via the front climate control touch screen. Touch the Rear A/C soft key to view the options. 97