JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type. TYPICAL SPECIFICATION MTH Tool Co. Series T41, T51 Pumps
|
|
- Esther Bishop
- 5 years ago
- Views:
Transcription
1 Peerless Pump Company Indianapolis, IN JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type SECTION 1720 Page 1 August 10, 1992 TYPICAL SPECIFICATION MTH Tool Co. Series T41, T51 Pumps Contractor shall furnish and install a MTH Tool Co. Close-Coupled Series (T41) (T51) (Cast Iron Bronze Fitted) (All Bronze) Turbine Vane pump for a rated capacity of USGPM against a total head of feet ( psi) with a motor rated at HP Volts Hz Phase (Open Drip Proof)(Totally Enclosed Fan Cooled) Enclosure which is built to NEMA (56C) (145TC)(182TZC) frame standards. Pump shall have a (cast iron) (bronze) motor bracket and discharge cover with registered fits to maintain axial alignment; bronze turbine vane impeller, (bronze shaft sleeve- 1/3 through 3 Hp. motors) (316 stainless steel motor shaft and impeller sleeve - 5 and 7-1/2 hp. motors), 1 inch suction and discharge connections to be of the threaded NPT type. Pump shall be designed for and equipped with mechanical seal. Pump shall be provided with casing relief valve per NFPA 20 (Paragraph ). Pump to be wall or pad mounted per drawings. TYPICAL SPECIFICATION MTH Tool Co. Series 150/160 Pumps Contractor shall furnish and install a MTH Tool Co. Series (150) (160) flexible coupled bronze fitted Turbine Vane pump for a rated capacity of USGPM against a total head of feet ( psi) with a motor rated at HP Volts Hz Phase (Open Drip Proof)(Totally Enclosed Fan Cooled) Enclosure with a steel non-drip rim channel base Wood's Sureflex flexible coupling, standard coupling guard. Pump shall have (cast iron) (bronze) channel rings and cast iron end covers accurately aligned with AISI 416 stainless steel guide rods, end covers and bearing arms shall have registered fits to maintain axially alignment; bronze turbine vane impeller(s) shall be keyed to a AISI 416 stainless steel shaft; lip-sealed permanently lubricated ball bearings shall be furnished secured on shaft with bearing locknuts. The suction and discharge connection shall be of 2 inch and of the threaded NPT type. Pump shall be designed for and equipped with mechanical seals. Pump shall be provided with casing relief valve per NFPA 20 (Paragraph ). Pump shall be pad mounted per drawings. Pump and motor shall be carefully aligned and bolted in place on base prior to factory shipment. Final alignment must be checked and certified by equipment installer prior to initial operation. Subject to change without notice.
2 Blank
3
4 SECTION 1720 Page 2.2 August 10, 1992 JOCKEY PUMPS Series T41 Regenerative Turbine Vane Type Pump Data for 5 and 7-1/2 Hp. O.D.P. and T.E.F.C. Motors MTH PUMPS 401 West Main Street Plano, Illinois Pump Construction Pump Pressure/Temperature Limitations Maximum Discharge Maximum Mechanical Maximum RPM Pressure PSIG Seal Pressure PSIG* Maximum Temperature o F. Bronze Fitted All Bonze *Suction Pressure plus 50% of Differential Pressure Part Name/ Description Part Number Qty Bronze Fitted Pump Material All Bronze Pump Material Motor Bracket 1 1 Cast Iron ASTM A48 Bronze ASTM B62 Cover 2 1 Cast Iron ASTM A48 Bronze ASTM B62 "O" Ring/Casing 7 1 Buna Buna Impeller 11 1 Bronze ASTM B62 Bronze ASTM B62 Seal Rotating Element 12 1 Buna/Carbon/316SS Buna/Carbon/316SS Seal Stationary Seat Buna/Ni-Resist Buna/Ceramic Drive Sleeve/Impeller Driver 14 1 Bronze ASTM B16 Bronze ASTM B16 Impeller Nut 15 1 Bronze Bronze Thru Bolt 19 2 Steel Steel Nut 20 2 Steel Steel Pipe Plug/Drain 22 1 Steel Bronze Key/Impeller SS 316 SS Key/Sleeve Drive 23A SS 316 SS NOTE: For repair parts pricing or parts order placement, refer to your local telephone company's yellow pages for MTH Tool Co. dealer, agent or representative's address and phone number and contact them for these services. Peerless Pump Company does not furnish repair parts or parts order placement for products not of their manufacture. Peerless Pump Company Drawing No
5
6 SECTION 1720 Page 2.4 August 10, 1992 JOCKEY PUMPS Series T51 Regenerative Turbine Vane Type Pump Data for 5 and 7-1/2 Hp. O.D.P. and T.E.F.C. Motors MTH PUMPS 401 West Main Street Plano, Illinois Pump Construction Pump Pressure/Temperature Limitations Maximum Discharge Maximum Mechanical Maximum RPM Pressure PSIG Seal Pressure PSIG* Maximum Temperature o F. Bronze Fitted All Bonze *Suction Pressure plus 50% of Differential Pressure Part Name/ Description Part Number Qty Bronze Fitted Pump Material All Bronze Pump Material Motor Bracket 1 1 Cast Iron ASTM A48 Bronze ASTM B62 Cover 2 1 Cast Iron ASTM A48 Bronze ASTM B62 "O" Ring/Casing 7 1 Buna Buna "O" Ring/Guide Rod 8 2* Buna Buna Impeller 11 1 Bronze ASTM B62 Bronze ASTM B62 Seal Rotating Element 12 1 Buna/Carbon/316SS Buna/Carbon/316SS Seal Stationary Seat Buna/Ni-Resist Buna/Ceramic Drive Sleeve/Impeller Driver 14 1 Bronze ASTM B16 Bronze ASTM B16 Impeller Nut 15 1 Bronze Bronze Guide Rod SS 316 SS Thru Bolt 19 2 Steel Steel Nut 20 2 Steel Steel Pipe Plug/Drain 22 1 Steel Bronze Key/Impeller SS 316 SS Key/Sleeve Drive 23A SS 316 SS *Pumps with a chamfer on both the cover and motor bracket requires a qty of 4 instead of 2 NOTE: For repair parts pricing or parts order placement, refer to your local telephone company's yellow pages for MTH Tool Co. dealer, agent or representative's address and phone number and contact them for these services. Peerless Pump Company does not furnish repair parts or parts order placement for products not of their manufacture. Peerless Pump Company Drawing No
7
8
9
10 Project : Customer: Item No.: 1 Capacity: Total Head: Pump Speed: 3500 (RPM) Frame/Model: Elec. Spec.: Service Factor: Quote No. : US Impeller Dia.: 2.81/2.81 (inch) Rotation: Pump Model: Peerless - CDL3 VPower: Enclosure/Type: Date :.
M50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationRegenerative Turbine Pumps
Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the
More informationRegenerative Turbine Pumps
Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps
More informationRegenerative Turbine Pumps
Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationTECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationHead - m. Flow - US gpm. Comments. Customer : Contact : Re Cotizacion Metro Linea 4 EDB Project : Quote No. :
Customer : Project : Re Cotizacion Metro Linea 4 Page No : 3 Contact : Phone : Fax : Type: PVF - In-Line Close Coupled Fire Item : RCI Electrica Pump Model: Nom. Speed: 2950 RPM, 50 Hz Electric Impeller
More information2CDU70/206-2HP 2CDU70/306-3HP CDU120/306-3HP 2CDU200/506-5HP 607
Model CDX/CDU Contents CDX/CDU Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data CDXU70/06-HP CDXU70/6-HP 5 6 8 6 CDXU0/6-HP CDXU00/6-5HP 7 CDU70/06-HP
More informationRegenerative Turbine Pumps
Bulletin 40 October 008 40 40 80 80 Series Regenerative Turbine Pumps Capacities to 60 GPM Heads to 800 Feet MTH PUMPS 40 40 80 80 Series regenerative turbine pumps represent the most economical, high
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More informationSUGGESTED SPECIFICATIONS Pump Frames NS3 thru OMC5
SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames NS3 thru OMC5 GENERAL Furnish and install Vertical Closed-Shaft Wet-Pit Pumping Units complete with all accessories and appurtenances as shown in the plans
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationSeries 4600F. HSC Fire Pumps & Packaged Systems
Series 4600F HSC Fire Pumps & Packaged Systems FILE NO: F43.11 DATE: May 26, 2008 SUPERSEDES: F43.11 DATE: Dec. 15, 2007 Series 4600F Series 4600F - Truly Superior The Series 4600F, drawing on over 100
More informationITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationProduct Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
More information3340 Series Single Stage End Suction Pumps
3340 Series Single Stage End Suction Pumps Bulletin 3340/Rev. A Model 3344 Aurora 3340 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years
More informationM50 L50 Series - 50Hz Metric Edition Multistage Regenerative Turbine Pumps
Page M-M MTH PUMPS M L Series - Hz Metric Edition Multistage Regenerative Turbine Pumps Capacities to LPM Heads to 6 Meters Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationSix-Inch Submersible Pumps
FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationFIRE PUMPS & PACKAGED
4600F Series HSC FIRE PUMPS & PACKAGED Systems FILE NO: 11-1 DATE: December 2004 SUPERSEDES: K13.110 DATE: April 1998 4600F Series Horizontal split case HSC fire pumps Armstrong Holden Brooke Pullen takes
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationRegenerative Turbine Pumps
Bulletin 0 0 2 0 2 170 270 Series Regenerative Turbine Pumps Capacities to 0 GPM Heads to Feet MTH PUMPS 0 2 0 2 170 270 Series Regenerative Turbine Pump MTH 0 2 0 2 170 270 Series regenerative turbine
More informationSECTION PUMPS GENERAL PUMPS PART RELATED DOCUMENTS
SECTION 15160 - PUMPS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
More informationRSV In-Line Vertical Multi-Stage, Ring Section Pumps
RSV In-Line Vertical Multi-Stage, Ring Section s Technical Specification Pages RSV In-Line Vertical Multi-Stage, Ring Section This page left intentionally blank. RSV In-Line Vertical Multi-Stage, Ring
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63
More informationSERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS
420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationOne & Two Stage Turbine Type Pumps
0A Series APO One & Two Stage Turbine Type Pumps apacities to 0 GPM Heads to 700 Feet Temperatures to 7 F Standard Bronze fitted construction Hydraulically balanced bronze impeller Right- or left-hand
More information5GB, 7GB, 10GB, 18GB, 25GB, 33GB
B-33GB GB, 7GB, GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction: Standard
More informationITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES
Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
More informationSUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T
SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.
More informationRepair Parts MODEL G&L Series NPE/NPE-F
Repair Parts MODEL G&L Series NPE/NPE-F 2005 ITT Water Technology, Inc. Effective June, 2005 RNPE TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM
More informationG&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3
More informationCLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
More informationItem No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions
Model CDU, Contents CDU, Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions CDU70/1-3/4HP CDU70/3-1 1 /2HP CDU70/5-2HP CDU120/1-1HP CDU120/3-1 1 /2HP 3 5, 311 6 311
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationWilo IL Vertical Inline Pumps. Engineering Specification
Wilo IL Vertical Inline Pumps Engineering Specification PART 1 - GENERAL 1.1 SUMMARY A. Pump shall be Series IL, long (split)-coupled, single stage vertical inline centrifugal pump as manufactured by WILO-NA.
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More information50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells
FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationUniversity of Houston Master Construction Specifications Insert Project Name
SECTION 23 30 00 - HVAC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section 23 01 00, "Mechanical
More informationRepair Parts MODEL NPE/NPE-F
Repair Parts MODEL NPE/NPE-F 2002 G&L Effective January, 2002 RNPE TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System... NPE Seal Chart (Part of Numbering System)... Parts List...2 Optional
More informationSubmersible Turbine Pumps
Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More information4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
More informationFAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934
FAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934 Section 932 Page 393 Supersedes Section 932 Page 393 Dated April 6 2.5 GPM 45 104 FJP-104-2.5 X900101 50 115.5 FJP-115.5-2.5 X900102 55 127
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationPump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp
Pump Specifications ELV Series Submersible Sump Pump with OilTector Control ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp ELV_ P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications
More informationSeries
MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationDWO DWO DWO DWO
Model Contents Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data 506 704 006 70 70 705 708 709 7 006 706 4006 707 www.pumpsebara.com 700 (t) 80 7-5005
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationSINCE Double Suction Split Case Fire Pump. Series 4800 & (New Generation) 001-cat f
SINCE 1981 Double Suction Split Case Fire Pump Series 4800 & 4900 (New Generation) www.flofab.com 001-cat-2016-4000f Go to www.flofab.com in Our Products Section to see the Master Spec - http://www.arcomnet.com/masterspec/
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationWG / WGS HIGH PRESSURE BOOSTER PUMPS
Date: June 1, 6 Section: 9 Page: 1 Cancel & replace: 03-01-1 WG / WGS HIGH PRESSURE BOOSTER PUMPS This type of pump is ideal for pressure up to 320 P.S.I. (2 kpa) and when boosting is necessary. In addition
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationEVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage
Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811
More informationApplication & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump
Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November
More informationSUBMITTAL DATA WATER PRESSURE BOOSTER SYSTEMS
WATER PRESSURE BOOSTER SYSTEMS Model WPB-100-40TT APPLICATION Applications include commercial, industrial and other installations requiring a boost in water pressure. The NECO Water Pressure Booster System
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More informationPeerless Pump FIRE PUMPS. Horizontal Split-Case, Vertical Turbine, In-Line and End Suction. Sterling Fluid Systems (USA), Inc.
Peerless Pump FIRE PUMPS Split-Case, Vertical Turbine, In-Line and End Suction Sterling Fluid Systems (USA), Inc. Brochure B-1500 Fire Protection Fire Pump Units & Packaged Systems You have decided to
More informationSeries 1510 Centrifugal Pumps
Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal
More informationBulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS
ulletin D1 September 006 D1 D61 D71 D91 Series Centrifugal Pumps Capacities to 0 GPM Heads to 60 eet MTH PUMPS Casing Standard casing construction of all units is ASTM A8 Class 0 cast iron. All bronze
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationCDU. Model CDU Contents. EBARA Stainless Steel Centrifugal Pumps
odel Contents Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions 7/-3/HP 7/3- /HP 7/-HP /-HP /3- /HP 3 3 /-3HP /- /HP /3-3HP /-3HP *Note: NSF/ANSI Annex G listed Certified
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More information