MaxiSys_Maybach_V6.60 Function List(Note:For reference only)

Transcription

1 Model year Model Series Control Unit Groups Drive Drive MaxiSys_Maybach_V6.60 Function List(Note:For reference only) NOTES: This function is supported. This function may be supported, which depends on the actual condition of the vehicle. This function is not supported. This function is the new feature in this version. As for special function please refer to the special function table. System Name ETC-Electronic transmission control ETC-Electronic transmission control Ecu Info. Read Event Memory Erase Live Data Freeze Frame Active Test Initial Startup Drive ESM-Electronic selector module F154 Drive SGR-Radar sensors control unit Drive DTR-Distronic F0E7 Drive DTR-Distronic Coding Special Function F053 F069 F054 F0DA F0DB F0DC F0DD F0DE F0DF F0E0 F0E1 F0E2 F05D F05E F05F F0E3 F0E4 F063 F064 F062 F053 F054 F055 F056 F057 F058 F059 F05A F05B F05C F05D F05E F05F F060 F061 F062 F063 F064 F062 F002 ME-SFI Motor electronics Drive C067 C13F C04B Chassis SBC-Sensotronic Brake Control SBC-Right Sensotronic Brake Chassis Control Chassis ESP-Electronic stability F019 Chassis AIRmatic F051 F0BF F113 Chassis TPC-Tire pressure monitor C001 Body CGW-Central gateway C005 C006 C007 F01B F01C F01D Body EZS-Electronic ignition switch Body AB-Airbag Body WSS-Weight sensing system Body BNS-Vehicle power supply control module Body Dr-side SAM-Driver signal acquisition actuation Pass-side SAM-Passenger-side Body signal acquisition actuation module C01C C01D C08C C023 C093 C094 C095 C01F C096 C097 C024 C062 C059 C098 F009 F073 F00C F00D F00E F00F F04F F183

2 Model year Model Series Control Unit Groups System Name Ecu Info. Body Rear SAM 1-Rear signal acquisition actuation Body Rear SAM 2-Rear signal acquisition actuation Body MSS-Special vehicle F025 multifunction control module Body VBF (Front control panel)-front control panel Body HBF (Rear control panel)-rear control field Body BCG-Remote control(rear control F025 field) Body OCP-Overhead control panel Body CRN-Center roof node Body PSE-Pneumatic system equipment Body HRA-Automatic headlamp range C001 C0A6 adjustment headlamp control F110 Body System diagnosis(can) PTS-Parktronic system SCM [MRM]-Steering column module ICM-Instrument cluster AGW-Audio gateway (MOST network management, diagnosis gateway, radio tuner) CTEL-Tele for telematics services Telephone adapter for portable CTEL-Tele for telematics services Read Event Memory Erase Live Data Freeze Frame Active Test Initial Startup AUDIO COMAND or AUDIO Coding C030 C031 C032 C033 C034 C035 C036 C032 C039 C03A C03B C03C C03D C03E C036 C037 C03F C040 Special Function F025 F025

3 Model year Model Series Control Unit Groups System Name Ecu Info. Read Event Memory Erase Live Data Freeze Frame NAVI-Navigation system VCS-Voice control system TV-TV tuner Active Test Initial Startup Coding TV-TV tuner(agw) C099 C0A7 SOUND-Bose sound system SDAR-Satellite radio CTEL-Mobile phone adapter with universal interface AVC-Audio video controller TV-TV tuner(rear) TV-TV tuner (rear) CDC-CD changer(rear) KTL-Left headphone transmitter KTR-Right headphone transmitter GPS box TELE AID-Control unit Special Function

4 Model year Model Series Control Unit Groups Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats System Name TELE AID-Telematic services Emergency call TELE AID-Telematic services MB Info,Roadside assistance(usa, Canada),Tele diagnosis(ece) TELE AID-Telematic services Stolen vehicle tracking TELE AID-Telematic services Remote door unlocking,remote door locking ESA-FL-Electric seat adjustment front left ESA-FR-Electric seat adjustment front right ESA-LR-Left rear electrical seat adjustment ESA-RR-Right rear electrical seat adjustment OSB-FL-Multicontour backrest front left OSB-FR-Multicontour backrest front right MKL-HL-Rear left multicontour backrest MKL-HR-Rear right multicontour backrest DCM-FL-Door control module front left DCM-FR-Door control module front right DCM-RL-Door control module rear left DCM-RR-Door control module rear right PWC-Partition wall control module LDCA-Electric left door closing assist RDCA-Electric right door closing assist Ecu Info. Read Event Memory Erase Live Data Freeze Frame Active Test Initial Startup Coding TLC-Trunk lid control C001 Special Function

5 Model year Model Series Control Unit Groups Air conditioning Air conditioning Air conditioning Air conditioning Drive Drive System Name Ecu Info. Read Event Memory Erase Live Data Freeze Frame Active Test Initial Startup AAC-Automatic air conditioning F025 REAR AC-Rear air conditioning STH-Stationary heater F10B HSW-Heated steering wheel F025 ETC-Electronic transmission control ETC-Electronic transmission control Drive ESM-Electronic selector module F154 Drive SGR-Radar sensors control unit Drive DTR-Distronic Drive ME Motor electronics Coding Special Function F053 F069 F054 F0DA F0DB F0DC F0DD F0DE F0DF F0E0 F0E1 F0E2 F05D F05E F05F F0E3 F0E4 F063 F064 F062 F053 F054 F055 F056 F057 F058 F059 F05A F05B F05C F05D F05E F05F F060 F061 F062 F063 F064 F062 F002 F011 F075 F008 F009 F00B F130 F073 F131 F07C F07F F132 F091 Drive FSCU-Fuel pump C066 Chassis SBC-Sensotronic Brake Control SBC-Right Sensotronic Brake Chassis Control Chassis ESP-Electronic stability F019 Chassis AIRmatic F051 F0BF F113 Chassis TPC-Tire pressure monitor C001 Body CGW-Central gateway C005 C006 C007 F01B F01C F01D Body EZS-Electronic ignition switch Body AB-Airbag Body WSS-Weight sensing system Body BNS-Vehicle power supply control module Body Dr-side SAM-Driver signal acquisition actuation Pass-side SAM-Passenger-side Body signal acquisition actuation module C001 C01D C060 C094 C023 C097 C020 C01F C0E5 C141 C024 C062

6 Model year Model Series Control Unit Groups System Name Ecu Info. Body Rear SAM 1-Rear signal acquisition actuation Body Rear SAM 2-Rear signal acquisition actuation Body MSS-Special vehicle F025 multifunction control module Body VBF (Front control panel)-front control panel Body HBF (Rear control panel)-rear control field Body BCG-Remote control(rear control F025 field) Body OCP-Overhead control panel Body CRN-Center roof node Body PSE-Pneumatic system equipment Body HRA-Automatic headlamp range C001 C0A6 adjustment headlamp control F110 Body System diagnosis(can) PTS-Parktronic system SCM [MRM]-Steering column module ICM-Instrument cluster AGW-Audio gateway (MOST network management, diagnosis gateway, radio tuner) CTEL-Tele for telematics services Telephone adapter for portable CTEL-Tele for telematics services Read Event Memory Erase Live Data Freeze Frame Active Test Initial Startup AUDIO COMAND or AUDIO Coding C030 C031 C032 C033 C034 C035 C036 C032 C039 C03A C03B C03C C03D C03E C036 C037 C03F C040 Special Function F025 F025

7 Model year Model Series Control Unit Groups System Name Ecu Info. Read Event Memory Erase Live Data Freeze Frame NAVI-Navigation system VCS-Voice control system TV-TV tuner Active Test Initial Startup Coding TV-TV tuner(agw) C099 C0A7 SOUND-Bose sound system SDAR-Satellite radio CTEL-Mobile phone adapter with universal interface AVC-Audio video controller TV-TV tuner(rear) TV-TV tuner (rear) CDC-CD changer(rear) KTL-Left headphone transmitter KTR-Right headphone transmitter GPS box TELE AID-Control unit Special Function

8 Model year Model Series Control Unit Groups Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats Seats System Name TELE AID-Telematic services Emergency call TELE AID-Telematic services MB Info,Roadside assistance(usa, Canada),Tele diagnosis(ece) TELE AID-Telematic services Stolen vehicle tracking TELE AID-Telematic services Remote door unlocking,remote door locking ESA-FL-Electric seat adjustment front left ESA-FR-Electric seat adjustment front right ESA-LR-Left rear electrical seat adjustment ESA-RR-Right rear electrical seat adjustment OSB-FL-Multicontour backrest front left OSB-FR-Multicontour backrest front right MKL-HL-Rear left multicontour backrest MKL-HR-Rear right multicontour backrest DCM-FL-Door control module front left DCM-FR-Door control module front right DCM-RL-Door control module rear left DCM-RR-Door control module rear right PWC-Partition wall control module LDCA-Electric left door closing assist RDCA-Electric right door closing assist Ecu Info. Read Event Memory Erase Live Data Freeze Frame Active Test Initial Startup Coding TLC-Trunk lid control C001 Special Function

9 Model year Model Series Control Unit Groups Air conditioning Air conditioning Air conditioning Air conditioning System Name Ecu Info. Read Event Memory Erase Live Data Freeze Frame Active Test Initial Startup AAC-Automatic air conditioning F025 REAR AC-Rear air conditioning STH-Stationary heater F10B HSW-Heated steering wheel F025 Coding Special Function

10 Index Specil Function Name Index Specil Function Name F001 Operational check F002 Switch off solenoid valve for torque converter lockup clutch. F003 Actual values of flush counter F004 Actual values: Oil level check F005 Oil color oil smell F006 Abrasion in transmission oil F007 Learning of the throttle valve stop F008 Activate fuel pump. F009 Teach in of drive authorization system F00A Performing sensor rotor adaptation F00B Resetting of mixture adaptation F00C Ignition F00D Fuel quantity F00E Idling specified speed with selector lever in position P or N F00F Idling specified speed with gear engaged F010 Electric suction fan for engine or air F011 Variant coding F012 Extension of run-on time F013 Adjustment of injector injection quantities F014 Reset quantity mean value adaptation data. F015 Replace component Diesel particulate Regeneration of diesel particulate filter F016 filter. when driving F017 Diesel particulate filter Used Program F018 Ststill test F019 Road test F01A Tire pressure loss warner F01B Vehicle data F01C Modification year or model year F01D All codes F01E Disable key or key track. F01F Once again authorize key or key track. F020 Program replacement keys. F021 Activate control module N73 (EIS [EZS] Activate control module N26/5 (Electric F022 control unit). steering lock control module). F023 Writing of the VIN F024 Carry out control unit reset. F025 Read coding change if necessary. F026 Zero position adjustment F027 Set reading of main odometer. F028 Setting days since initial registration F029 ASSYST settings F02A Control module reset F02B Special equipment F02C Internal ASSYST PLUS data F02D Configuration of oil grade selection F02E Restart of optical ring F02F Normalizing of positioning motors F030 Check of adjustment range of positioning F031 Teach-in of actuator motors after actuator Breaking-in procedure after replacement of F032 motor replacement refrigerant compressor F033 F034 Teaching in the diesel particulate filter F035 component Diesel particulate filter Teach-in of diesel particulate filter after replacement of engine control unit without transfer of values F036 after replacing the engine control unit component B28/8 (Pressure differential sensor (DPF)) F037 F038 component G3/1 (O2 sensor downstream TWC) component Y74 (Pressure control valve) F039 component Y100/2 (Boost pressure regulator) F03A Reset values for HFM drift compensation. F03B Resetting air filter learned values after air filter replacement F03C Changing the language version(linguatronic) F03D Program brake assist F03E CO2 setting F03F Maximum governed speed F040 Test terminal 15 connection from. F041 M12/1s3 (Down final shutoff microswitch) F042 Air exit temperature at rear roof F043 Resetting adaptation values F044 Retarder specified torque F045 Test cable - switch for, repair or replace if necessary. Specil_Function F046 F047 'PTO' solenoid valves F048 Both fuses o.k.? The actual value indicates the current status of the starter lockout (). F049 Screw connections of unit pumps for cylinders Switch on rear lamps. to F04A Calibration F04B Premature flame detection F04C Program CNG compressed natural gas Mode F04D Resetting of mixture adaptation(cng compressed natural gas) F04E Idle speed set value F04F CO setting for vehicles without TWC F050 CO setting for vehicles without TWC(Natural F051 Initial startup with manual settings input Initial startup with automatic takeover of F052 for new control unit,for example: The settings of previous control unit previous control unit can no longer be F053 Definition F054 Important information on adaptation limit F055 Adaptation values of shift :1-2: F056 Adaptation values of shift :2-3: F057 Adaptation values of shift :3-4: F058 Adaptation values of shift :4-5: F059 Adaptation values of shift :5-4: F05A Adaptation values of shift :4-3:

11 Index Specil Function Name Index Specil Function Name F05B Adaptation values of shift :3-2: F05C Adaptation values of shift :2-1: F05D Display all adaptation data. F05E Resetting of adaptation data F05F Performing adaptation F060 Adaptation via coolant temperature F061 Adaptation via torque ranges F062 Help F063 Warranty or goodwill processing F064 Actual values: Oil level check F065 F067 Switch off the incline recognition for dynamometer mode. Learning process: Y3/8s1 (Selection range sensor (VGS)) F066 F068 F069 Assignment of hydraulic shift elements F06A Detach the transport protection of control module ETC, personalize or activate the Learning to the drive authorization system Resetting of adaptation data(torque converter lockup clutch) F06B Adaptation of torque converter lockup F06C Performing adaptation(wet start-off clutch F06D Upshifts F06E Downshifts F06F Reverse gear F070 Learning of the recirculated air flap stop F071 Resetting of sensor adaptation F072 Sensor rotor adaptation F073 Default initialization F074 Quick test of mixture adaptation F075 Correction programming F076 Teach-in process after engine replacement F077 Teach in ethanol portion in fuel. F078 Resetting the cold-start adaptation values F079 Resetting the reading of the counter for ethanol teach-in processes F07A Readiness- F07B Test values of emissions test F07C Measures for initiating the fault path F07D Notes on emissions inspection (OBD I/M F07E Readiness for exhaust emissions inspection F07F Notes on readiness F080 Teach-in of camshaft positions F081 Coding according to plant data F082 Resetting of adaptation data F083 Readiness for exhaust emissions inspection F084 SCN(Software Calibration Number) F085 CVN(Calibration verification number) F086 Type approval number F087 Lambda control, upstream TWC F088 Lambda control, downstream TWC F089 Fuel pump F08A Teach-in process for component M16/45 (EGR [ARF] actuator motors) F08B Initiation of self-adjustment F08C Correction programming of ignition F08D Correction programming of fuel quantity F08E Correction programming of the CO setting(for vehicles with no catalytic F08F Desensibilize shutoff threshold of smooth engine running. F090 Readiness- F091 Notes on Emissions inspection ( OBD I/M F092 Perform calibration. F093 Detach the transport protection of control module ISM, personalize or activate the F094 Refill AdBlue. F095 Erasing adaptation values after replacement F096 of AdBlue fluid component Y129 (AdBlue?metering valve) F097 Reprogram diesel particulate filter in control unit N3/9 (CDI control unit). F098 Regeneration of diesel particulate filter F099 Teach in component Y94 (Quantity control F09A Resetting the lambda values F09B Rapid teach-in of zero quantity calibration Rapid teach-in of zero quantity calibration F09C values for calibration point 230 bar values for calibration point 600 bar F09D Drive authorization(personalizing) F09E Drive authorization(activating) F09F Carry out the following procedure in order to include a new system in the list: F0A0 System pressure in brake circuit 2 F0A1 H4/4 (Right rear door speaker group) F0A2 Test fuel pump, replace if necessary. F0A3 Teach in component M16/6 (Throttle valve F0A4 Teach in component M55 (Inlet port shutoff F0A5 Teach in component Y77/1 (Charge pressure positioner). F0A6 Purge control Diesel particulate filter F0A7 Rapid teach-in of zero quantity calibration F0A8 values component Y74 (Pressure control valve) F0A9 Variant coding according to factory data F0AA Drive authorization F0AB F0AC component G3/2 (O2 sensor upstream of KAT) component Diesel oxidation catalytic F0AD F0AE component B16/15 (Temperature sensor component SCR-Catalytic converter upstream of SCR catalytic converter) F0AF F0B1 component N37/7b1 (NOx sensor downstream of diesel particulate filter) component Y129 (AdBlue?metering valve) F0B0 F0B2 component N37/8b1 (NOx sensor downstream of SCR catalytic converter) Teach-in of SCR exhaust aftertreatment system after replacement of engine control unit without transfer of values

12 Index Specil Function Name Index Specil Function Name F0B3 component SCR-Catalytic converter F0B4 component B16/15 (Temperature sensor upstream of SCR catalytic converter) F0B5 F0B6 component B28/16 (DPF differential pressure component NOx sensor upstream of SCR F0B7 F0B8 component NOx sensor downstream of SCR component Y27/9 (Exhaust gas recirculation F0B9 Resetting AdBlue quality factor F0BA Tire pressure loss warner(activating) F0BB Calibration of control unit N30/4 Erase zero point offset error of component F0BC (Electronic Stability Program control N49 (Steering angle sensor). unit)-calibration of intake valves F0BD Calibration of control unit N30/4 (Electronic Stability Program control unit)-calibration of separation valves F0BE Write wheel electronics identification number. F0BF Initial startup with manual settings input for new control unit/level calibration F0C0 Level calibration F0C1 Check the correctness of the MB part F0C2 'OPEN' lock switch F0C3 Control unit UNLOCK F0C4 Control unit LOCK F0C5 Resetting menu settings to manufacturer default settings F0C6 Increase main odometer reading. F0C7 Read coding. F0C8 Adaptation data of power upshifts F0C9 Adaptation data deceleration upshifts F0CA Adaptation data power downshifts F0CB Adaptation data deceleration downshifts F0CC Adaptation data filling pressure F0CD Adaptation stop values F0CE Notes on combinations of adaptation data F0CF Acceleration upshift from gear 1 to 2 F0D0 Acceleration upshift from gear 2 to 3 F0D1 Acceleration upshift from gear 3 to 4 F0D2 Acceleration upshift from gear 4 to 5 F0D3 Decelerate downshifts from 5 to 4 F0D4 Decelerate downshifts from 4 to 3 F0D5 Additional information regarding oil level F0D6 Actual values: Oil level check F0D7 Electric emergency running F0D8 Mechanical-hydraulic emergency running F0D9 Reset Distronic option. F0DA Important information on the combination possibilities for adapation end stop values F0DB Adaptation values of shift 1-2: F0DC Adaptation values of shift 2-3: F0DD Adaptation values of shift 3-4: F0DE Adaptation values of shift 4-5: F0DF Adaptation values of shift 5-4: F0E0 Adaptation values of shift 4-3: F0E1 Adaptation values of shift 3-2: F0E2 Adaptation values of shift 2-1: F0E3 Performing adaptation on vehicles with Performing adaptation on vehicles with F0E4 torque converter lockup clutch engagement torque converter lockup clutch engagement F0E5 Settings F0E6 Acceleration of sensor rotor adaptation F0E7 Control unit adaptations F0E8 Teaching in of swirl flap stop F0E9 Exhaust gas recirculation valve teach-in F0EA Check sensor adaptation. F0EB Secondary air injection F0EC Diagnosis of O2 sensors F0ED Exhaust gas recirculation diagnosis F0EE Selfadaptation of mixture formation F0EF Extension of run-on time DAS 3 F0F0 Erase zero point offset error of component N49 (Steering angle sensor). F0F1 Erase zero point offset error of component Disable key or key track with the workshop F0F2 B24/15 (Rotary speed lateral key. F0F3 Activate control module N73 (EIS [EZS] control unit). F0F4 Windshield adaptation F0F5 Adaptation of the light sensor F0F6 Adaptation:Windshield Green glass F0F7 Normalization of the tilting/sliding roof's obstruction sensor F0F8 Trip computer settings F0F9 Set main odometer back. F0FA Instrument cluster settings F0FB Normalizing of forward/back adjustment F0FC Normalizing of height adjustment at front F0FD Normalizing of height adjustment at rear F0FE Normalizing of head restraint adjustment F0FF Normalizing of backrest adjustment F100 Adjust parameter for backrest adjustment. F101 F103 Parameterization of function for moving front passenger seat out of way when folding down rear seat Setting parameters for collision avoidance With this routine, the parameters for the compensating movement for collisions between the backrest the rear panel can F102 F104 Readjust adjustment parameters. Resetting the parameters for collision avoidance to the default value The stard parameters for the control unit will be restored.

13 Index Specil Function Name Index Specil Function Name F105 Deactivate collision avoidance. If the collision avoidance feature is the subject of a customer complaint because the seat cannot be moved to a desired position, the collision avoidance feature can be F106 The collision avoidance feature prevents the seat from colliding with surrounding elements (such as the headliner or rear wall) during seat adjustment by limiting the range of adjustment or triggering F107 Parameterize easy entry/exit. F108 Increase fore/aft adjustment range to rear. F109 Parameterization of function for moving CO2 setting (cold setting of combustion air F10A driver seat out of way when folding down blower) F10B Learning component A8/3 (STH radio remote control transmitter) F10C Diesel particulate filter Purge control F10D Diesel particulate filter New Initializing F10E Self-adaptation F10F Assignment of control modules to plug F110 Zero position adjustment of axle or level F111 CNG compressed natural gas Mode F112 Resetting of mixture adaptation CNG compressed natural gas F113 Pneumatic test of component A9/1 (AIRmatic F114 PML speed-sensitive power steering F115 Key assignment or key track assignment to a F116 Telematic service 'Remote door unlocking' F117 Parameterization windshield adaptation F118 Adaptation:Windshield Green glass-only for customer complaints concerning the lights' switch-on thresholds! F119 Panoramic sliding roof F11A Sliding/tilting roof F11B Automatic interior mirror dimming F11C Tourist mode(symmetrical light F11D EP: Reset operating hours counter. F11E Setting main odometer forward back F11F Current brake lining thickness F120 Air cushion calibration F121 Short stroke parameter F122 Delay of rear wiper startup after F123 Duration of wipe cycle F124 wiper/wash function is turned on Voltage threshold for vehicle power supply emergency mode F125 Intermediate position Rear-end door F126 Initializing Diesel particulate filter F127 Prevention of diesel particulate filter F128 Replace component NOx storage catalytic F129 Replace component Y74 (Pressure control F12A Replace component M16/6 (Throttle valve F12B Replacement of component Diesel particulate Replacement of component Diesel particulate F12C filter on left filter on right F12D Replacement of an exhaust-relevant Replacement of an exhaust-relevant F12E component on the left bank component on the right bank F12F Replacement of control module N80 (Steering column module) F130 Reset lambda adaptation F131 Readiness for exhaust emissions inspection F132 Readiness- F133 Calibration of control unit ABR F134 Reset compressor operating time F135 Pneumatic test of component A9/1y1 Pneumatic test of component Y36/6y1 (Left F136 (AIRmatic pressure release valve) front level control valve) F137 Pneumatic test of component Y36/6y2 (Right Pneumatic test of component Y36/6y3 (Left F138 front level control valve) rear level control valve) F139 Pneumatic test of component Y36/6y4 (Right Pneumatic test of component Y36/6y5 F13A rear level control valve) (AIRmatic central reservoir charge valve) F13B Leakage test between compressor valve Leakage test between valve block F13C block suspension struts F13D Leakage test between valve block central reservoir F13E Steering column module F13F Teach-in process for anti-pinch protection function of panoramic sliding sunroof/roller sun blind F140 Tourist mode-adaptation of headlamps from left-h traffic system to right-h traffic system or vice versa. F141 Resetting operating hours counter F142 Perform self-test 'B84/2 (Night View Assist camera)'. F143 Calibration Reset F144 Average mileage per day F145 Initialization of power closing F146 Normalization of all seat adjustment motors F147 Adapt obstruction protection. F148 Normalizing Rear left right F149 Denormalization normalization of trunk Teach-in of rotary potentiometers for the F14A lid control air outlets F14B Learning component A8/3 (STH radio remote Calibration of control unit N47-5 (ESP F14C control transmitter) control unit) F14D Complete or correct VIN. F14E Denormalization due to VIN deletion F14F Interrupt driving test. F150 Calibration of control unit RBS F151 Calibration of component B37/1 (Pedal angle Erase zero point offset error of component F152 sensor) B24/15 (Micromechanical yaw rate sensor AY

14 Index Specil Function Name Index Specil Function Name F153 Calibration of component Vacuum pump brake booster F154 Detach the transport protection of control module N15/5 (Electronic selector lever module control unit), personalize or F155 Read coding transfer to the new control F156 Learning process F157 Resetting of variant locking F158 Calibration of the plunger travel sensors F159 Load adjustment F15A Raise lower the suspension struts at F15B Raise lower the suspension struts at Raise lower the suspension struts at F15C medium speed high speed F15D Activate electronic ignition switch. F15E Rain sensor F15F Setting of limit position of excess force F160 Coding of the close-via-tilt function F161 Coding of sliding/tilting roof function of 'automatic operation' F162 Assign transmitter card to key track. F163 Assign Keyless Go key to key track. F164 Set time. F165 Normalization of fore/aft adjustment of Normalization of inclination adjustment of F166 left seat left seat cushion F167 Normalization of fore/aft adjustment of Normalization of inclination adjustment of F168 right seat right seat cushion F169 Reduce the longitudinal travel with the retaining clip installed on the fore/aft F16A Forward/back adjustment F16B Height at front F16C Height at rear F16D Seat cushion depth F16E Backrest F16F Head restraint F170 Change of adjusted temperature F171 Blower F172 Evaporator temperature F173 Ventilation of heat exchangers F174 Test of left heating capacity F175 Test of right heating capacity F176 Refrigerant circuit test F177 Defroster button F178 Pushbutton for rear window defroster F179 Rest button F17A ON/OFF button F17B Right air distribution F17C EC button F17D Right temperature button F17E Blower button F17F Left temperature button F180 REC pushbutton F181 Left air distribution F182 Activated charcoal filter button F183 Dwell time F184 Teaching-in of rotary potentiometer for center nozzle side outlets F185 Reset of calibrations F186 Calibration of plunger travel F187 Calibration of component B24/12 (ABC lateral acceleration sensor) F188 Keyboard test F189 CAN signal failure of brake wear at 2nd Teach in control unit ''N30/6 (Regenerative F18A rear axle right braking system control unit)'' again. F18B ESP calibration at ststill F18C component Diesel particulate filter F18D Calibration of control unit RBS F18E Teach-in process for obstruction sensor of tilting/sliding roof F18F Normalization of tilting/sliding roof F190 Normalization of panoramic sliding roof F191 Teach-in process for anti-pinch protection function of panoramic sliding sunroof F192 F193 Intermediate position Rear-end door F194 Re-initialization of AdBlue range Denormalization normalization of rearend door closing. F195 Transmitter key / Transponder key F196 Test of remote control key F197 Test of immobilizer F198 Learn radio code of a new transmitter key. F199 Correction programming of AC compressor F19A Erase crash memory. F19B Perform windscreen adaptation for rain F19C Revocably deactivate key. F19D Reactivate key. F19E Irrevocably deactivate key. F19F Learn replacement key. F1A0 Teach in used diesel particulate filter. F1A1 Teach in new diesel particulate filter.

15 Coding Special_Function Index Specil Function Name Index Specil Function Name C001 Read coding change if necessary. C002 Coding C003 Control unit replacement C004 Display of coding data C005 Vehicle data C006 Modification year or model year C007 All codes C008 Central gateway functionality C009 Vehicle speed signal threshold for automatic Turn signal confirmation for opening C00A locking closing via transmitter key C00B Telematic service 'Remote door unlocking' (TELE AID) C00C Fuel cell or electric drive C00D Modification year or model year Interior CAN C00E Modification year or model year Engine CAN bus C00F Series engine version C010 National version C011 Driving lights C012 Transmission C013 Teles C014 Climate control C015 Washer system C016 Headlamp cleaning system C017 Parktronic C018 Convenience systems C019 Wipers C01A Trailer C01B Special vehicles C01C Chassis number C01D Steering variant C01E Seat belt buckle switch(front) C01F Seat belt reminder warning for front passenger C020 Seat mat type 'Passenger' C021 Passenger airbag C022 Emergency tensioning retractor(front) C023 Side airbags C024 Control unit is released. C025 Parameterization windshield adaptation C026 ATA basic function C027 ATA alarm signal siren C028 Basic setting(n10 (SAM control unit)) C029 Rear foglight(national version) C02A Light sensor C02B Programming of vehicle equipment C02C Special equipment C02D Current menu setting C02E Customer-specific settings C02F Engine type C030 Specified configuration of MOST components C031 Apply actual configuration of the MOST components as the specified configuration. C032 Radio parameters C033 Additional settings C034 Fan setting C035 Station memory C036 Restart of optical ring C037 Installation state C038 Operating principle Fan C039 Navigation C03A Navigation parameters C03B TV parameters(shut off criteria) C03C TV/DVD deactivation(valid for Hongkong) C03D Rear screen C03E DVD country code C03F Fan(EXTERNAL) C040 Fan(INTERNAL) C041 Read coding change if necessary.(only for Read coding change if necessary.(customer C042 special protection vehicles) settings) C043 Power window parameters C044 Fault monitoring at output E6/5 (Left exterior mirror turn signal lamp):deactivating C045 Fault monitoring at output E6/6 (Right This setting should only be changed if C046 exterior mirror turn signal lamp):deactivating requested by customer. C047 Workshop coding C048 Variant coding according to factory data C049 SCN(Software Calibration Number) C04A Type approval number C04B CVN(Calibration verification number) C04C Read coding transfer to the new control unit. C04D License plate bracket C04E Warning signal-configuration C04F Trailer coupling C050 ROELight Configuration C051 on redocumentation of equipment codes for SCN coding C052 on coding C053 Language settings C054 Navigation data C055 AUX input C056 Video AUX jack C057 Display coded vehicle data. C058 Disposal detonation C059 Vehicle equipment C05A Settings C05B Coding for weight-optimized running boards C05C Side airbag deactivation [USA] C05D Special protection C05E Seat fittings C05F Seat belt buckles C060 Emergency tensioning retractor C061 Check parameterization. C062 Control unit LOCK C063 Diagnosis to plant specifications:read coding change if necessary. C064 Zero position adjustment C065 Diagnosis to plant specifications C066 Read coding. C067 Coding according to plant data C068 SCN( Software Calibration Number) CVN( Calibration verification number)

16 Index Specil Function Name Index Specil Function Name C069 Reset parameter Variant coding. C06A Learning processes C06B Control unit UNLOCK C06C Steering version C06D Special settings C06E Menu item '' is found in main menu '' (menu item ''). C06F Set status CAN bus C070 Headlamp range adjustment C071 Automatic driving lights on C072 COMAND or AUDIO C073 Wiper system C074 Rear window screen C075 Distronic C076 ATA interior motion sensor C077 ATA towing sensor C078 Trailer recognition C079 Trailer lighting C07A Special vehicle multifunction control module (SVMCM) C07B Lane recognition C07C Sound system C07D Key assignment or key track assignment to a memory block number C07E Automatic closing of front windows C07F Automatic closing of rear windows C080 Stard setting: Climate control C081 Pollutant-dependent switchover to recirculated Temperature correction (only valid for C082 air temperature increase) C083 Manual recirculated air control C084 Sun sensor C085 Temperature correction C086 Seat adjustment C087 Windscreen heater C088 Trailer recognition/trailer lighting C089 Keyless Go C08A Version: Interior CAN bus C08B Setting of basic ventilation C08C Vehicle model C08D Side airbags[front PASSENGER] C08E Interior rearview mirror C08F Sliding/tilting roof C090 Panoramic sliding roof C091 Roller sun blind C092 Closing of tilting/sliding roof when it rains C093 Kneebags C094 Buckle emergency tensioning retractor C095 Automatic child seat recognition(acsr [AKSE])/Seat occupied recognition C096 Rear seat belts C097 Window airbags C098 Test of seat mat components C099 National variant coding C09A Codings specific for instrument cluster C09B Configuration of menu items in multifunction display C09C Fuel tank version C09D Factory settings C09E Configuration for key 1 C09F Configuration for key 2 C0A0 Configuration for key 3 C0A1 Trip computer settings C0A2 Coding according to plant data:read coding change if necessary. C0A3 Vehicle version C0A4 Rear warning elements C0A5 PTS switch C0A6 Zero position adjustment of axle or level sensors C0A7 PAL/NTSC C0A8 'Driver' automatic seat adjustment with memory C0A9 Stationary heater C0AA Convenience closing C0AB Reset coding. C0AC Engine version C0AD Equipment C0AE Footwell lighting C0AF Oil cooler relay C0B0 Gear display C0B1 Curve illumination C0B2 Headlamp cleaning system C0B3 Turning lamps C0B4 'Refrigerant' pressure sensor C0B5 Status of terminal via CAN bus C0B6 Signal Terminal 61 C0B7 Coding of model series C0B8 Coding Modification year C0B9 Model designation(only with code 336) C0BA Radiator blind C0BB Side lamp Version C0BC Front seat heater C0BD Battery sensor C0BE Battery sensor LIN bus C0BF Rear head restraint lowering C0C0 Deactivate ATA function. C0C1 National version of ATA function C0C2 Volume control Warning buzzer(usa) C0C3 Spotlight Trunk lid C0C4 Diesel particulate filter C0C5 Equipment version C0C6 Flashing stop lamp C0C7 Variant coding C0C8 Automatic interior mirror dimming C0C9 Adaptation:Windshield Green glass-only for customer complaints concerning the lights' C0CA Tilting/sliding roof memory feature switch-on thresholds! C0CB Automatic closing function C0CC Anti-throbbing position C0CD PRE-SAFE C0CE Key-dependent storage C0CF Oil level indicator C0D0 Stard variant coding C0D1 Setting of trip computer constants C0D2 Brake data C0D3 Configuration of oil grade selection C0D4 Service work sequence

17 Index Specil Function Name Index Specil Function Name C0D5 Program vehicle parameters. C0D6 Menu item 'Read coding transfer to the new control unit.' is found in main menu 'Rear-end door closing control module' (menu item 'Initial startup'). C0D7 CAN reception data C0D8 Delete coding. C0D9 Set control module to base function. C0DA Read the coding of control module. C0DB Higher-priority alarm options C0DC Silent alarm C0DD Full alarm C0DE Radio help call C0DF Odometer C0E0 Additional equipment C0E1 Options C0E2 Advanced options C0E3 Run-on times C0E4 Undervoltage value C0E5 NECK-PRO head restraint C0E6 Interior lamp-actuation C0E7 Interior emergency illumination C0E8 Convenience function Rear side blind Rear window screen C0E9 Convenience function Sliding/tilting roof C0EA Close-via-tilt function C0EB Anti-pinch protection C0EC ATA Volume control: Warning buzzer(usa)(the coding is set according to the customer's request.) C0ED ATA National variant coding C0EE ATA Volume control: Warning buzzer(usa) C0EF Cigarette lighter C0F0 Rear foglight C0F1 Closing the panoramic sliding sunroof during C0F2 Automatic opening closing of panoramic C0F3 rain Actual configuration of MOST telematics CAN bus control units C0F4 C0F5 Menu settings C0F6 sliding sunroof Specified configuration of MOST telematics CAN bus control units Specified configuration of Telematics CAN bus control units C0F7 TV DVD Shut off criteria C0F8 Activate or deactivate navigation C0F9 Menu settings(only development data) C0FA C0FB Automatically adjust vehicle-specific special equipment-specific codings. C0FC C0FD SPLITVIEW(USA Canada) C0FE Adopt the actual configuration of the MOST telematics CAN bus control units as the specified configuration. Display of all COMAND codings Activation Video AUX jack(only for special protection vehicles) C0FF Mercedes-Benz Contact C100 Service call(development data) C101 Workshop coding1 C102 Engine model coding C103 CO2 setting of combustion air blower C104 Vehicle power supply emergency operation C105 Undervoltage shutoff threshold C106 Flashing of LED in switch N72/1s30 (STH/HB [ZUH]/residual heat button) due to C107 Settings: Ventilation time, Settings: Heating time C108 Auxiliary heating C109 Special vehicle special protection(b6/b7):read Special vehicle special protection(b4):read C10A coding change if necessary. coding change if necessary. C10B AIRmatic/ABC active body control C10C Rear air conditioning C10D Stationary heater or Telestart C10E Cellular telephone C10F Engine cooling C110 Automatic dimming mirror C111 Power locking C112 ATA interior motion / towing sensor C113 Voice control system C114 Multifunction steering wheel C115 Tire pressure monitor C116 CGW N93 (Central gateway control unit) C117 Adaptation of electronic ignition switch to vehicle model/turn signal confirmation for opening closing via transmitter key C118 Adaptation of electronic ignition switch to vehicle model C119 Suction fan control C11A Initializing:Steering column module C11B Alarm siren:reset coding. C11C Rain sensor C11D Steering column module C11E Activated/Deactivated C11F Signal C120 Positions C121 Temperature C122 Cycles C123 Rear screen C124 Electric rear window curtain C125 Miscellaneous C126 C127 Coding of the close-via-tilt function C128 Setting of limit position of excess force limiter Coding of sliding/tilting roof function of 'automatic operation' C129 Factory settings Trunk lid remote closing C12A Trunk lid remote release C12B Trunk lid remote closing C12C Trunk interior button C12D Head restraint adjustment C12E Multicontour backrests C12F Central locking C130 Childproof locks

18 Index Specil Function Name Index Specil Function Name C131 Emergency opening C132 Presafe C133 Adaptation of the light sensor amplification factor C134 Display coding C135 Key-dependent configurations C136 National variant coding for vehicles without special protection'guard' C137 National variant coding for vehicles with special protection'guard' C138 RDK tire pressure control C139 Bus system-telematic C13A ASSYST settings C13B Duration of actuation:mirror housing C13C Readjust adjustment parameters. C13D Activate or deactivate easy entry/exit. C13E MAXCOOL C13F SCN( Software Calibration Number) C140 Control unit adaptations C141 Pyrofuse C142 Fuel tank characteristic curve C143 Setting main odometer forward back C144 Easy Entry C145 Installation of control unit in vehicles prior to model refinement 2008 C146 Windshield adaptation C147 Speed-sensitive power steering C148 ESP-Trailer stabilization C149 Check coding of national version. C14A Relocking/Vehicle speed threshold for automatic locking C14B Parameterization C14C Read coding change if necessary.(sliding/tilting roof) C14D Read coding change if necessary.(panoramic sliding roof) C14E Daytime running lamps Japan variant C14F Rear power windows C150 Basic setting C151 Stard Drive/ Full hybrid drive C152 Front windscreen wipers/ Washer nozzle heater/ Seat heater/ Power window PRE-SAFE/ Foglights/ Turning lamps C153 Modification year C154 Equipment Special equipment code Acoustic lock feedback C155 Easy Entry/ Rear seat belt buckle switch( Code U01) C156 Rear-end door lock C157 EDW anti-theft alarm C158 Light C159 Trailer coupling/ Spare wheel carrier C15A Model series C15B LED'Trailer lighting' C15C Relays Seat adjustment C15D Ambiance lighting( Code 877) C15E Control module reset C15F Internal ASSYST PLUS data C160 Volume C161 Pushbutton C162 Assignment of control unit to model series C163 Special equipment 'Spare wheel carrier' C164 All coding settings C165 Workshop coding2 C166 Coding of control module A6 (Stationary C167 Flashing of LED in switch due to undervoltagen72/1s30 (STH switch) C168 Settings: Ventilation time, Settings: Heating time