CURRICULUM VITAE. S.No. Degree Discipline College/University Year of Percentage/ passing CGPA/GGPA th All subjects MP Board Bhopal
|
|
- Anastasia Carroll
- 5 years ago
- Views:
Transcription
1 CURRICULUM VITAE Dr. Naresh Kumar Raghuwanshi Assistant Professor Mechanical Engineering Department Government Engineering College Banswara, Rajasthan, India Contact No.: Research Areas Stress and vibration analysis, experimental modal analysis, experimental stress analysis, vibration based condition monitoring and fault diagnosis Educational Qualifications S.No. Degree Discipline College/University Year of Percentage/ passing CGPA/GGPA th All subjects MP Board Bhopal % th Maths Group MP Board Bhopal % 3. B.E. Mechanical S.A.T.I. Vidisha % Engineering 4. M.Tech Stress and M.A.N.I.T. Bhopal GGPA. Vibration Analysis 5. Ph.D. Mechanical IIT Indore CGPA Engineering Teaching & Research Experiences = 6.5 years Research Scholar and Teaching Assistant in Mechanical Engineering Department at IIT Indore (22 July 2013 to 15 December 2017). Lecturer in Mechanical Engineering at Bansal College of Engineering, Mandideep M.P. (31 st August 2009 to 20 th July 2011).
2 Ph.D. Thesis Title Experimental Techniques for the Measurement of Gear Mesh Stiffness Brief Abstract: The mesh stiffness plays a vital role in gear dynamics. Mostly, analytical expressions are being used to calculate the mesh stiffness. In the present research work, five experimental techniques viz. photoelasticity technique, strain gauge technique, laser displacement sensor technique, digital image correlation technique and experimental modal analysis technique have been proposed to measure the mesh stiffness of spur gear pairs. The experimental results of mesh stiffness for healthy and cracked tooth pairs have been compared with the results obtained by analytical and finite element methods. These experimental techniques can be used as an alternative technique to the analytical and FEM or for validating the mesh stiffness results obtained by analytical and FEM. Subjects Preferences for Teaching Mechanics of Materials Mechanical Vibrations Machine Components Design Engineering Graphics List of Publications International Journal Papers 1. Raghuwanshi N.K., Parey A, Experimental measurement of spur gear mesh stiffness using digital image correlation technique, Measurement, 111 (2017) (I.F ) 2. Raghuwanshi N.K., Parey A, Effect of Back-Side Contact on Mesh Stiffness of Spur Gear Pair by Finite Element Method, Procedia Engineering, 173 (2017) Raghuwanshi N.K., Parey A., Experimental measurement of gear mesh stiffness of cracked spur gear by strain gauge technique, Measurement, 86 (2016) (I.F ) 4. Raghuwanshi N.K., Parey A., Mesh stiffness measurement of cracked spur gear by photoelasticity technique, Measurement, 73 (2015) (I.F )
3 5. Raghuwanshi N.K., Parey A, Experimental Measurement of mesh stiffness by laser displacement sensor technique, Measurement, (I.F ), (Under review) 6. Raghuwanshi N.K., Parey A, Mesh stiffness measurement of spur gear pair by experimental modal analysis, Mechanism and Machine Theory, (I.F ), (Under review) International Conference Papers 1. Raghuwanshi N.K., Parey A., Effect of Back-Side Contact on Mesh Stiffness of Spur Gear Pair by Finite Element Method, 11th international symposium IMPLAST, IIT Delhi, December Raghuwanshi N.K., Parey A., Experimental measurement of gear mesh stiffness by photoelasticity, VIRM-11, University of Manchester, UK, September Raghuwanshi N.K. and Parey A., Radial location of strain gauge on cracked tooth root of spur gear for accurate determination of stress intensity factor, 2 nd international conference on Intelligent Robotics, Automation and Manufacturing (IRAM 2013), IIT Indore, Dec Workshops Attended A Short Term Course on Condition Monitoring of Rotating Machine Elements, IIT Indore (21-23 December 2015) A Short Term Course on Condition Monitoring of Mechanical and Electrical Systems using Advanced Signal Processing Techniques, IIT Indore, March Software Proficiencies CATIA V5 Pro-e ANSYS Workbench MATLAB Membership Life Member of ISTE (The Indian Society for Technical Education)
4 Awards /Achievements MHRD Ph.D. Scholarship during 2013 to MHRD M.Tech. Scholarship during 2011 to 2013 on the basis of GATE Foreign travel support by DST SERB Government of India (September 2016) for attending the conference at the University of Manchester, Manchester, UK. Three times GATE Qualified (GATE 2011, GATE 2012 and GATE 2013) First Rank in Class 12 th and Second Rank in Class 10 th References 1. Dr. Anand Parey (Professor) Mechanical Engineering Discipline, IIT Indore, Indore, India, Mobile No.: Dr. M Santhakumar (Associate Professor) Mechanical Engineering Discipline, IIT Indore, Indore, India, santhakumar@iiti.ac.in Mobile No.: Dr. Shailesh Kundalwal (Assistant Professor) Mechanical Engineering Discipline, IIT Indore, Indore, India, kundalwal@iiti.ac.in Mobile No.:
5 Personal Information Father s Name Mr. Khilan Singh Raghuwanshi Mother s Name Mrs. Parwati Bai Raghuwanshi Category General Date of birth 15/05/1987 Gender Male Marital status Unmarried Nationality Indian Languages Hindi and English Permanent Address Village Nolai, Post -Manora, Tehsil - Gyaraspur Dist.:- Vidisha (M.P.) Declaration I hereby declare that the all above furnished information are true to the best of my knowledge. Place: Banswara Date: 10/01/2018 Naresh Kumar Raghuwanshi
VISHNU SANKAR M.Tech (Ph.D Scholar at CUSAT), Thermal Engineering Mobile: ,
M.Tech (Ph.D Scholar at CUSAT), Thermal Engineering Mobile: 9567683959, 9497509992. Email: vishnusankar9369@gmail.com PERSONAL DETAILS Nationality : Indian Date of Birth : 03-10-1990 Sex : Male Marital
More informationCURRICULUM VITAE. Dr. PRAVEEN R.P. Professional Objective:
CURRICULUM VITAE Dr. PRAVEEN R.P Professional Objective: To prove myself as a dedicated and energetic employee in a progressive organization that gives me scope to apply my knowledge and skills and be
More informationFEM Analysis of Combined Paired Effect on Piston & Connecting Rod using ANSYS
FEM Analysis of Combined Paired Effect on Piston & Connecting Rod using ANSYS Kunal Saurabh Assistant Professor, Mechanical Department IEC Group of Institutions, Greater Noida - India kunalsaurabh.me@ieccollege.com
More informationFACULTY PROFILE. Degree Branch / Specialization College University
FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7
More informationNational Institute of Industrial Engineering (NITIE) Vihar Lake, Mumbai Application Form for Admission to 2-Year PG Programmes
National Institute of Industrial Engineering (NITIE) Vihar Lake, Mumbai-400 087 Application Form for Admission to 2-Year PG Programmes 2018-2020 Personal Details Application Number 184173 Gender Full Name
More informationSRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING
SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING Name & Photo Dr. B. RAJENDRA PRASATH Designation Professor & Head Qualification UG(Specialization) Mechanical Engineering PG(Specialization)
More informationM.E. Scholar (Design and Thermal), I.E.T-DAVV, Indore, M.P., India. 2
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY PARAMETRIC ANALYSIS OF SPUR GEAR TO DETERMINE THE EFFECT OF VARIATION OF R.P.M. AND PRESSURE ANGLE ON STRESS PRODUCED Yogendra
More informationFaculty Vitae. Education Degree Discipline Institution Year UG BE Mechnical Madras university 1997
Faculty Vitae Name of the Faculty Dr.R.VENKATESH BABU Education Degree Discipline Institution Year UG BE Mechnical Madras university 1997 PG ME CAD Madras University 2001 PhD Ph.D IC Engines Bharath Institute
More information[Potghan*, 4.(8): August, 2015] ISSN: (I2OR), Publication Impact Factor: 3.785
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY STRESS REDUCTION BY INTRODUCING STRESS RELIEVING FEATURES OF SPUR GEAR USED IN LATHE HEADSTOCK Deepika Potghan*, Prof. Suman Sharma
More informationNational Institute of Technology, Tiruchirappalli: Performa for CV of Faculty/ Staff Members
Curriculum Vitae Dr. Vivek Mohan is a recent Post-Doctoral Fellow from The Hong Kong Polytechnic University, Hong Kong, with a Doctoral of degree in Energy with specialization in Electric Power System
More informationEducational qualification:
hoto S.RAJKUMAR Designation: Assistant Professor (SG) Manakula Vinayagar Institute of Technology, Madagadipet, Puducherry, Pin code 605 107. E mail: rajkumareee@mvit.edu.in Phone: 0413-2680020 Mobile:
More informationWorkshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications
Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications 18 th - 21 st July 2018 By- Power Electronics Lab (EE Department) Indian
More informationCurriculum Vitae Dr. HAFIZUR RAHMAN Phone (Residence): ; Mobile:
Curriculum Vitae Dr. HAFIZUR RAHMAN Phone (Residence): +91 571 2504970; Mobile: +91 9997549589 Email: hifz.rahman@gmail.com; SUMMARY OF SKILLS AND EXPERIENCE B.Sc. Engineering (Electrical), M.Sc. Engineering
More informationCurriculum Vitae. Dr. VIJAY PRATAP SINGH. Education: Prasanna Kumar Acharya
Prasanna Kumar Acharya Career Objective: Being an Electrical Engineer, My endeavor would always be in providing 100% of my energy & effort in fulfillment of the mission of an institution. To strive for
More informationR&D Experience at Danfoss Power Electronics A/s Power Electronics; Control Engineering R&D Design Center; Denmark Education
Dr. Sanjeet Kumar Dwivedi Ph.D (IIT Delhi), M.Tech(IIT Roorkee) Gold Medallist SMIEEE, LMISTE R&D Engineer, Control Engineering Power Electronics R&D Design Center Denmark Danfoss Power Electronics A/s
More informationB.Shanker. 35 Years. S.No Degree University Year of passing 1 M.Tech. N.I.T.W 2007 Power Systems Engineering 2
Profile of Mr. B.SHANKER Name: B.Shanker Age: Permanent Address: 35 Years Islampet Opposite: L.E.F Church Bapatla-522101 Mail:shanker.bhanath@becbapatla.ac.in Educational Qualifications: S.No Degree University
More informationModal analysis of Truck Chassis Frame IJSER
Modal analysis of Truck Chassis Frame 158 Shubham Bhise 1, Vaibhav Dabhade 1, Sujit Pagi 1, Apurvi Veldandi 1. 1 B.E. Student, Dept. of Automobile Engineering, Saraswati College of Engineering, Navi Mumbai,
More informationCurriculum Vitae. (March 2018)
Curriculum Vitae (March 2018) PERSONAL INFORMATION Surname Hosseini Name Seyed Mohsen Date of birth 04/07/1987 Address Via Gaetano Postiglione, 14, 70125, Bari, Italy Email seyedmohsen.hosseini@poliba.it
More informationForced vibration frequency response for a permanent magnetic planetary gear
Forced vibration frequency response for a permanent magnetic planetary gear Xuejun Zhu 1, Xiuhong Hao 2, Minggui Qu 3 1 Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System, Yanshan
More informationStatic And Modal Analysis of Tractor Power Take Off (PTO) Gearbox Housing
Static And Modal Analysis of Tractor Power Take Off (PTO) Gearbox Housing Gopali S Lamani 1, Prof: S.R.Basavaraddi 2, Assistant Professor, Department of Mechanical Engineering, JSPM NTC RSSOER,India1 Professor,
More informationComparison Of Multibody Dynamic Analysis Of Double Wishbone Suspension Using Simmechanics And FEA Approach
International Journal of Research in Engineering and Science (IJRES) ISSN (Online): 232-9364, ISSN (Print): 232-9356 Volume 2 Issue 4 ǁ April. 214 ǁ PP.31-37 Comparison Of Multibody Dynamic Analysis Of
More informationSUMMARY OF SKILLS AND EXPERIENCE
Curriculum Vitae Dr. HAFIZUR RAHMAN Professor, Electrical Engineering Department, AMU, Aligarh-202002, India Phone (Residence): +91 571 2504970; Mobile: +91 9997549589 Email: hifz.rahman@gmail.com; SUMMARY
More informationRam Kumar. G/14, Sunset Heights 53 Juhu Tara Road Mumbai 40049, Maharashtra Telephone
About Me Marketing and Sales Professional Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer nec odio. Praesent libero. Sed cursus ante dapibus diam. Sed nisi. Nulla quis sem at nibh elementum
More information[Vishal*et al., 5(7): July, 2016] ISSN: IC Value: 3.00 Impact Factor: 4.116
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY DESIGN AND ANALYSIS OF ALUMINUM ALLOY PISTON USING CAE TOOLS Mr. Jadhav Vishal, Dr. R.K. Jain, Mr. Yogendra S.Chauhan *M-Tech
More informationDesign, Analysis& Optimization of Truck chassis- Rail & Cross member
Design, Analysis& Optimization of Truck chassis- Rail & Cross member Mr. Jinto Joju Thaikkattil 1, Gayatri Patil 2 1 PGScholar, Department of Mechanical Engg., KJCOEMR, Pune, jjt7171@gmail.com 2 Assistant
More informationStudy Of Static And Frequency Responsible Analysis Of Hangers With Exhaust System
International Journal of Advances in Scientific Research and Engineering (ijasre) ISSN: 2454-8006 [Vol. 03, Issue 5, June -2017] Study Of Static And Frequency Responsible Analysis Of Hangers With Exhaust
More informationFAULT ANALYSIS IN GEARBOX USING VIBRATION TECHNIQUE
FAULT ANALYSIS IN GEARBOX USING VIBRATION TECHNIQUE Pratesh Jayaswal 1#,Sawan Arya 2#, Nidhi Gupta 3# #1Head of the Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior,
More informationUMONS. Curriculum Vitae of. Bashir Bakhshideh Zad. September 16, No. 31, Boulevard Dolez, Mons, BELGIUM +32(0)
Curriculum Vitae of Bashir Bakhshideh Zad Gender: Date of Birth: Nationality: Address: Tel: E-Mail: Male September 16, 1985 Iranian No. 31, Boulevard Dolez, Mons, BELGIUM +32(0) 65 37 41 24 Bashir.BAKHSHIDEHZAD@umons.ac.be
More informationInternational Engineering Research Journal Analysis of HCV Chassis using FEA
International Engineering Research Journal Special Edition PGCON-MECH-017 International Engineering Research Journal Nikhil Tidke 1, D. H. Burande 1 PG Student, Mechanical Engineering, Sinhgad College
More informationINCREASE IN FATIGUE LIFE OF SPUR GEAR BY INTRODUCING CIRCULAR STRESS RELIEVING FEATURE
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6359(Online), Volume TECHNOLOGY 6, Issue 5,
More informationCOMPARISON OF ANALYTICAL & FEA OF CONTACT ANALYSIS OF SPUR GEAR DRIVE
COMPARISON OF ANALYTICAL & FEA OF CONTACT ANALYSIS OF SPUR GEAR DRIVE Sachin Almelkar 1, Prof I.G.Bhavi 2 1M.Tech (Machine Design). B L D E A s Dr.P.G. Halakatti College Of Engineering and Technology,Vijayapur,
More informationDr. PUJA DASH, MIEEE, LMISTE ASSOCIATE PROFESSOR
Dr. PUJA DASH, MIEEE, LMISTE ASSOCIATE PROFESSOR DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING GAYATRI VIDYA PARISHAD COLLEGE OF ENGINEERING (Autonomous) Madhurwada, Visakhapatnam, Pin-530048, Andhra
More informationThermal Analysis of Helical and Spiral Gear Train
International Journal for Ignited Minds (IJIMIINDS) Thermal Analysis of Helical and Spiral Gear Train Dr. D V Ghewade a, S S Nagarale b & A N Pandav c a Principal, Department of Mechanical, GENESIS, Top-Kolhapur,
More informationReview of Overhead Crane and Analysis of Components Depending on Span
Review of Overhead Crane and Analysis of Components Depending on Span Omkar K. Sakurikar 1, D.V. Kushare 2 1Student, Department of Mechanical Engineering, N.D.M.V.P.S K.B.T. College of Engineering, Nashik,
More informationStructural Analysis of Differential Gearbox
Structural Analysis of Differential Gearbox Daniel Das.A Seenivasan.S Assistant Professor Karthick.S Assistant Professor Abstract- The main aim of this paper is to focus on the mechanical design and analysis
More informationTransient Dynamic Analysis and Optimization of a Piston in an Automobile Engine
Transient Dynamic Analysis and Optimization of a Piston in an Automobile Engine Krupal A 1, Chandan R 2, Jayanth H 3, Ranjith V 4 1M.Tech Scholar, Mechanical Engineering, Dr. Ambedkar Institute of Technology,
More informationOptimization of Seat Displacement and Settling Time of Quarter Car Model Vehicle Dynamic System Subjected to Speed Bump
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Optimization
More informationDesign and Stress Analysis of Crankshaft for Single Cylinder 4-Stroke Diesel Engine
Design and Stress Analysis of Crankshaft for Single Cylinder 4-Stroke Diesel Engine Amit Solanki #1, Jaydeepsinh Dodiya #2, # Mechanical Engg.Deptt, C.U.Shah University, Wadhwan city, Gujarat, INDIA Abstract
More informationAERODYNAMIC IMPROVEMENT OF A TRUCK BODY BY USING CFD
AERODYNAMIC IMPROVEMENT OF A TRUCK BODY BY USING CFD K. Durga Priyanka #1 and Dr. B. Jayachandraiah *2 #1 M.Tech Student, CAD/CAM, Srikalahasteeswara institute of technology, Srikalahasthi, Chittoor dist,
More informationDESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS
DESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS GAJENDRA G 1, PRAKASHA A M 2, DR NOOR AHMED R 3, DR.K.S.BADRINARAYAN 4 1PG Scholar, Mechanical department, M S Engineering College,
More informationInduction Motor Condition Monitoring Using Fuzzy Logic
Advance in Electronic and Electric Engineering. ISSN 2231-1297, Volume 3, Number 6 (2013), pp. 755-764 Research India Publications http://www.ripublication.com/aeee.htm Induction Motor Condition Monitoring
More informationK.S.R. COLLEGE OF ENGINEERING, TIRUCHENGODE
K.S.R. COLLEGE OF ENGINEERING, TIRUCHENGODE 637 215. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING FACULTY PROFILE 01. Name :Dr.R.SANKARGANESH 02. Designation :Assistant Professor (Sr.) 03. Date
More informationCURRICULUM VITAE. Name : Ali Kamil Makki Al-Shaikhli Place and Date of Birth : Baghdad, Iraq, 2 nd May 1950 Languages : Arabic and English
CURRICULUM VITAE Name : Ali Kamil Makki Al-Shaikhli Place and Date of Birth : Baghdad, Iraq, 2 nd May 1950 Languages : Arabic and English UNIVERSITY DEGREES Diploma (with Distinction) in Electrical and
More informationCovering Letter and CV to Chalmers
Covering Letter and CV to Chalmers My name is Ingemar Johansson and I recently returned to Sweden after having lived and worked in England for 15 years. I have worked mainly within automotive engineering
More informationEffect of Rim Thickness on Symmetric and Asymmetric Spur Gear Tooth Bending Stress
NaCoMM-2009-### Effect of Rim Thickness on Symmetric and Asymmetric Spur Gear Tooth Bending Stress G. Mallesh 1*, Dr. V B Math 2, Ravitej 3, Krishna Prasad Bhat P 3, Paramesh Kumar M K 3 1 Assistant Professor,
More informationA Review: Design, Modeling and Stress Analysis of high speed helical gear according to Bending strength and Contact strength using AGMA and ANSYS
A Review: Design, Modeling and Stress Analysis of high speed helical gear according to Bending strength and Contact strength using AGMA and ANSYS Tanvirkhan A.Malek (M.Tech. Student, Department of Mechanical
More informationVinayak R.Tayade 1, Prof. A. V. Patil 2. Abstract
FINITE ELEMENT ANALYSIS OF TRACTOR TROLLEY CHASSIS Abstract Vinayak R.Tayade 1, Prof. A. V. Patil 2 1 P.G.Student, Department of Mechanical Engineering, S S G B COE&T, Bhusawal, Maharashtra, (India) 2
More informationINTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY
INTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY A PATH FOR HORIZING YOUR INNOVATIVE WORK MODELLING AND ANALYSIS OF HYDRAULIC CYLINDER USING ANSYS PARAMETRIC DESIGN LANGUAGE:
More informationCurriculum Vitae. Date of Birth: 23/03/1951 mailing address: Khilda P.O. Box 1877
Curriculum Vitae Name: Dr. Jiries Basil Elias Alatrash Date of Birth: 23/03/1951 mailing address: Khilda P.O. Box 1877 E-Mail: jiriesb@yahoo.com Postal Code 11 821 Amman-Jordan Specialization: Electrical
More informationFATIGUE STRENGTH AND DYNAMIC VIBRATIONAL ANALYSIS OF V8 ENGINE CRANK SHAFT USING FINITE ELEMENT METHOD
FATIGUE STRENGTH AND DYNAMIC VIBRATIONAL ANALYSIS OF V8 ENGINE CRANK SHAFT USING FINITE ELEMENT METHOD Maleppa Dasara 1, Manjunath M V 2, Dr S Padmanabha 3, Dr Shyam Kishore Srivastava 4 1 Student, Department
More informationVibration Testing and Performance Analysis of IC Engine Exhaust Valve Using Finite Element Technique
Vibration Testing and Performance Analysis of IC Engine Exhaust Valve Using Finite Element Technique B.E.Gajbhiye 1, V.V.Bhoyar 2, S.B.Chawale 3,R.S.Ambade 4 1,2,3,4: Asst. prof.mechanical EnggDepartment,
More informationANALYSIS OF SURFACE CONTACT STRESS FOR A SPUR GEAR OF MATERIAL STEEL 15NI2CR1MO28
ANALYSIS OF SURFACE CONTACT STRESS FOR A SPUR GEAR OF MATERIAL STEEL 15NI2CR1MO28 D. S. Balaji, S. Prabhakaran and J. Harish Kumar Department of Mechanical Engineering, Chennai, India E-Mail: balajimailer@gmail.com
More informationAnalysis Of Gearbox Casing Using FEA
Analysis Of Gearbox Casing Using FEA Neeta T. Chavan, Student, M.E. Design, Mechanical Department, Pillai Hoc, Maharashtra, India Assistant Prof. Gunchita Kaur-Wadhwa, Mechanical Department Pillai Hoc,
More informationISSN: [Raghunandan* et al., 5(11): November, 2016] Impact Factor: 4.116
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY DESIGN AND ANALYSIS OF GO-KART CHASSIS D.Raghunandan*, A.Pandiyan, Shajin Majeed * Mechanical Department, Final year, Saveetha
More informationStress Analysis of Engine Camshaft and Choosing Best Manufacturing Material
Stress Analysis of Engine Camshaft and Choosing Best Manufacturing Material Samta Jain, Mr. Vikas Bansal Rajasthan Technical University, Kota (Rajasathan), India Abstract This paper presents the modeling
More informationISSN: ISO 9001:2008 Certified International Journal of Engineering Science and Innovative Technology (IJESIT) Volume 2, Issue 2, March 2013
ISSN: 2319-5967 Effect on Induction Motor Performance with Broken Rotor Bars Using Finite Element Method Ray Hardik, Manish Sinha, Vijayaraj J PG Scholar, Assistant Professor, Manager R&D Abstract Three
More informationOptimization & Modal Analysis of Engine Mounting Bracket for Different Materials by Using Finite Element Analysis
Optimization & Modal Analysis of Engine Mounting Bracket for Different Materials by Using Finite Element Analysis Tushar P. Kamble 1, Rajratna A. Bhalerao 2 1 M.E. Mechanical Design, Student, JSPM s JSCOE
More informationFACULTY PROFILE. School/Collage. JNTU College of Engineering, Kakinada. National Institute of Technology, Warangal.
FACULTY PROFILE Name of the faculty: D. SRINIVASA RAO Department: ELECTRICAL & ELECTRONICS ENGINEERING : GUDLAVALLERU ENGINEERING COLLEGE: GUDLAVALLERU Phone No: 08674-273737 (O) Mobile: 9866981707 E-Mail:
More informationEstimation of Wear Depth on Normal Contact Ratio Spur Gear
Middle-East Journal of Scientific Research 24 (S1): 38-42, 2016 ISSN 1990-9233 IDOSI Publications, 2016 DOI: 10.5829/idosi.mejsr.2016.24.S1.9 Estimation of Wear Depth on Normal Contact Ratio Spur Gear
More informationFatigue Analysis of Tractor Trailer Chassis
Fatigue Analysis of Tractor Trailer Chassis Mr. Venukumar R Bankapur 1, Prof. Sanjeev. A. Janawade 2 1 M.tech student of Design Engineering, Department of Mechanical Engineering, KLE Dr. MSSCET Belgaum,
More informationSTRESS ANALYSIS OF PISTON USING PRESSURE LOAD AND THERMAL LOAD
STRESS ANALYSIS OF PISTON USING PRESSURE LOAD AND THERMAL LOAD Vaishali R. Nimbarte 1, Prof. S.D. Khamankar 2 1 Student of M.Tech (CAD/CAM), Rajiv Gandhi College Of Engineering, Research and Technology,
More informationAddress for Correspondence
Research Article DESIGN AND STRUCTURAL ANALYSIS OF DIFFERENTIAL GEAR BOX AT DIFFERENT LOADS C.Veeranjaneyulu 1, U. Hari Babu 2 Address for Correspondence 1 PG Student, 2 Professor Department of Mechanical
More informationDESIGN AND FABRICATION OF CHASSIS FOR ELECTRICAL VEHICLE
DESIGN AND FABRICATION OF CHASSIS FOR ELECTRICAL VEHICLE SHAIK.BALA SAIDULU 1, G.VIJAY KUMAR 2 G.DIWAKAR 3, M.V.RAMESH 4 1 M.Tech Student, Mechanical Engineering Department, Prasad V Potluri Siddhartha
More informationQatar University Electrical Energy Education. Rashid Alammari Associate Prof. Dept. of Electrical Eng. Qatar Univ.
Qatar University Electrical Energy Education Associate Prof. Dept. of Electrical Eng. Qatar Univ. Tuesday, December 15, 2009 1 Contents Introduction Course Offerings Labs University/Industry Relationship
More informationDesign, Modeling and Structural Analysis of Helical Gear for ceramic and steel material by using ANSYS
Design, Modeling and Structural Analysis of Helical Gear for ceramic and steel material by using ANSYS Niyamat.A.Mulla M.Tech Final Year Student Mechanical Engineering Department, Malla Reddy College of
More informationADVANCES in NATURAL and APPLIED SCIENCES
ADVANCES in NATURAL and APPLIED SCIENCES ISSN: 1995-0772 Published BYAENSI Publication EISSN: 1998-1090 http://www.aensiweb.com/anas 2017 April 11(4): pages 544-550 Open Access Journal Analysis Of Sliding
More informationModeling and Analysis of Tractor Trolley Axle Using Ansys
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 6, Issue 5 (May. - Jun. 2013), PP 88-92 Modeling and Analysis of Tractor Trolley Axle Using Ansys
More informationPERSONAL DATA. Position: Associate Professor (Petroleum Engineering) Cell Phone Number: +2 ( ) Work Phone and fax Number: +2 ( )
DR. SAID KAMEL ELSAYED SALEM Associate Professor (Petroleum Engineering) Suez Canal University, Faculty of Petroleum and Mining Engineering, Suez, Egypt PERSONAL DATA Position: Associate Professor (Petroleum
More information2007 Training: Basic training of AVL Fire software 2006 Seminar: Proactive approach of Croatian laboratories to the use of EU funds.
CURRICULUM VITAE Personal information Name: Darko Surname: Kozarac Date of birth: 18 th September 1975. Place of birth: Zagreb Address: Suncani brijeg 42, 10000 Zagreb, Croatia e-mail: darko.kozarac@fsb.hr
More informationDesign of Boom Attachment in Backhoe Loader to Excavate Inaccessible Location
Design of Boom Attachment in Backhoe Loader to Excavate Inaccessible Location 1 Kishore Krishna M, 2 Palani P.K 1 PG Scholar, Department of Engineering Design, Government College of technology, Coimbatore.
More informationTypical Stress & Deflection Analysis of Spur Gear in Spur Gear Assembly
IJSTE - International Journal of Science Technology & Engineering Volume 3 Issue 02 August 2016 ISSN (online): 2349-784X Typical Stress & Deflection Analysis of Spur Gear in Spur Gear Assembly Ch. Ramakrishna
More informationTooth Shape Optimization of the NGW31 Planetary Gear Based on Romax Designer
6th International Conference on Electronics, Mechanics, Culture and Medicine (EMCM 2015) Tooth Shape Optimization of the NGW31 Planetary Gear Based on Romax Designer Chunming Xu 1, a *, Ze Liu 1, b, Wenjun
More informationLoad Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4 Stroke Engine
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 08, 2015 ISSN (online): 2321-0613 Load Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4
More informationOptimization and comparison of a Mono Parabolic Leaf Spring by Using Design of Experiment & Simulated Annealing Algorithm
International Research Journal of Engineering and Technology (IRJET) e-issn: 2395-56 Volume: 5 Issue: 2 Feb-218 www.irjet.net p-issn: 2395-72 Optimization and comparison of a Mono Parabolic Leaf Spring
More informationDesign, Analysis & Development of Spur Pinion of Rotary Actuator With Different Materials
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X PP. 05-11 www.iosrjournals.org Design, Analysis & Development of Spur Pinion of Rotary Actuator With Different
More informationDESIGN AND DEVELOPMENT OF A TEST RIG TO ESTIMATE FATIGUE LIFE OF THE TIMING BELT OF I. C. ENGINE
DESIGN AND DEVELOPMENT OF A TEST RIG TO ESTIMATE FATIGUE LIFE OF THE TIMING BELT OF I. C. ENGINE Ramrajesh H. Deshmukh 1, Mukund B. Patwardhan 2 1 Student, Design Engineering, Walchand college of Engineering,
More informationComparative study between double wish-bone and macpherson suspension system
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Comparative study between double wish-bone and macpherson suspension system To cite this article: Shoaib Khan et al 2017 IOP Conf.
More informationStudy of Vibrational Effects on Heavy Duty Truck Chassis with the Help of Model Analysis Using Fem Technique
Study of Vibrational Effects on Heavy Duty Truck Chassis with the Help of Model Analysis Using Fem Technique Bhupendra E. Gajbhiye 1, Sachin V. Bhalerao 2, Kapil B. Salve 3 1,2,3: Jawaharlal Darda Institute
More informationB.Tech. Final Year (Mechanical) Projects Supervised: 1. Development of Transient Droplet Combustion Model. (1995).
Annexure-I Theory Courses Taught (UG Level): 1. Basic Thermal Science (B.Tech 1st Year). 2. Applied Thermodynamics (B.Tech II Year Mechanical). 3. Energy Conversion Systems (Pre final Year). 4. Power Plant
More informationResume. January 21, 2016 onwards. AMU 1988 First (Hons.) 76.38
General Information: Resume Page 1 Name ABU TARIQ Date of Birth May 1, 1967 Current Designation: Professor Faculty positions held: Lecturer April 16,1990-July 26, 1998 Lecturer ( Senior Scale) July 27,
More informationCURRICULUM VITAE - Lisa Fiorentini
CURRICULUM VITAE - Lisa Fiorentini Contact Information Current Position Address 208 Dreese Laboratories 2015 Neil Avenue, Columbus, OH, 43210, USA Phone 614 292 5774 Email fiorentini.2@osu.edu Assistant
More informationANALYSIS AND OPTIMIZATION OF CONNECTING ROD USING ALFASiC COMPOSITES
ANALYSIS AND OPTIMIZATION OF CONNECTING ROD USING ALFASiC COMPOSITES Kuldeep B 1, Arun L.R 2, Mohammed Faheem 3 P.G. Scholar, Department of Mechanical Engineering, The Oxford college of Engineering, Karnataka,
More informationSTRUCTURAL ANALYSIS OF SPUR GEAR USING FEM
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 6, November December 2016, pp.01 08, Article ID: IJMET_07_06_001 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=6
More informationStress Analysis of Piston at Different Pressure Load
Stress Analysis of Piston at Different Pressure Load 1 PG Student, Department of Mechanical Engineering, SKNSITS, Lonavala, India 2 Professor, Department of Mechanical Engineering, SKNSITS, Lonavala, India
More informationEXPERIMENTAL ANALYSIS AND TOPOLOGY OPTIMIZATION OF LOWER SUSPENSION ARM OF CAR
EXPERIMENTAL ANALYSIS AND TOPOLOGY OPTIMIZATION OF LOWER SUSPENSION ARM OF CAR Rupali Dhore 1, Prof. M.L. Thorat 2 1B.E.MECH. (M.E.Pursuing), Mechanical Department, RMD SINHGAD SCHOOL OF ENGINEERING, PUNE
More informationStructural Analysis of Pick-Up Truck Chassis using Fem
International Journal of ChemTech Research CODEN (USA): IJCRGG, ISSN: 0974-4290, ISSN(Online):2455-9555 Vol.9, No.06 pp 384-391, 2016 Structural Analysis of Pick-Up Truck Chassis using Fem Rahul.V 1 *,
More informationStress Analysis in Automotive Chassis Using Analytic Hierarchy Process
Volume 117 No. 20 2017, 569-578 ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version) url: http://www.ijpam.eu ijpam.eu Stress Analysis in Automotive Chassis Using Analytic Hierarchy Process
More informationSTATIC STRUCTURAL ANALYSIS AND OPTIMIZATION OF BRAKE PEDAL
STATIC STRUCTURAL ANALYSIS AND OPTIMIZATION OF BRAKE PEDAL Miss. ASHWINI N.GAWANDE 1, Prof.G.E.KONDHALKAR 2, Prof. ASHISH R.PAWAR 3 1PG Student, Design Engineering, APCOE & R, Parvati, Pune 2HOD, Mechanical
More informationStructural Analysis of Student Formula Race Car Chassis
Structural Analysis of Student Formula Race Car Chassis Arindam Ghosh 1, Rishika Saha 2, Sourav Dhali 3, Adrija Das 4, Prasid Biswas 5, Alok Kumar Dubey 6 1Assistant Professor, Dept. of Mechanical Engineering,
More informationPREDICTION OF PISTON SLAP OF IC ENGINE USING FEA BY VARYING GAS PRESSURE
PREDICTION OF PISTON SLAP OF IC ENGINE USING FEA BY VARYING GAS PRESSURE V. S. Konnur Department of Mechanical Engineering, BLDEA s Engineering College, Bijapur, Karnataka, (India) ABSTRACT The automotive
More informationElectrical Engineering
Electrical Engineering FACULTY PROFILE Year (2018-19) 1. Name: Mr. Naik Yogesh R. 2. Designation: Assistant Professor 3. Qualification: M.Tech [Power Systems] 4. Area of Specialization: Power Systems 5.
More informationTransmission Weight & Efficiency Optimization in Off Road Vehicle (Tractor Gearbox)
Transmission Weight & Efficiency Optimization in Off Road Vehicle (Tractor Gearbox) Shrikant S. Joshi 1 Corresponding Author C.Maria Antoine Pushparaj 2 Dept. of Mechanical Engg., SRM University, Kattankulathur-603203,
More informationAnalysis on natural characteristics of four-stage main transmission system in three-engine helicopter
Article ID: 18558; Draft date: 2017-06-12 23:31 Analysis on natural characteristics of four-stage main transmission system in three-engine helicopter Yuan Chen 1, Ru-peng Zhu 2, Ye-ping Xiong 3, Guang-hu
More informationFUZZY LOGIC FOR SWITCHING FAULT DETECTION OF INDUCTION MOTOR DRIVE SYSTEM
FUZZY LOGIC FOR SWITCHING FAULT DETECTION OF INDUCTION MOTOR DRIVE SYSTEM Sumy Elizabeth Varghese 1 and Reema N 2 1 PG Scholar, Sree Buddha College of Engineering,Pattoor,kerala 2 Assistance.Professor,
More informationPower Electronics and Drives (PED)
Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters
More informationDESIGN AND ANALYSIS OF EXHAUST VALVE SPRINGS IN IC ENGINES
DESIGN AND ANALYSIS OF EXHAUST VALVE SPRINGS IN IC ENGINES Gowtham.R 1*, Sangeetha N 2 1 Third year UG student, Department of Mechanical Engineering, Kumaraguru College of Engineering and Technology, Coimbatore,
More informationBENDING STRESS ANALYSIS OF SPUR GEAR BY USING MODIFIED LEWIS FORMULA
BENDING STRESS ANALYSIS OF SPUR GEAR BY USING MODIFIED LEWIS FORMULA 1 Namrata S.Gadakh, 2 Prof. R.S. Shelke 1 P.G. Scholar Mechanical SVIT Nashik Pune University 2 Assistant Professor (Mechanical Dept.)
More informationTHE STUDY ON EFFECT OF TORQUE ON PISTON LATERAL MOTION
THE STUDY ON EFFECT OF TORQUE ON PISTON LATERAL MOTION Vinay V. Kuppast 1, S. N. Kurbet 2, A. M. Yadawad 3, G. K. Patil 4 1 Associate Professor, 2 Professor & Head, 4 Associate Professor, Department of
More informationDesign and Optimization of HTV Fuel Tank Assembly by Finite Element Analysis
Design and Optimization of HTV Fuel Tank Assembly by Finite Element Analysis Ms.Baseera Banushaik PG Student, Department of Mechanical Engineering, Malla Reddy College of Engineering, Secunderabad. Ms.I.Prasanna
More informationVIBRATION ANALYSIS OF SPUR GEAR BY MASS REDUCTION AND CHANGING MATERIAL Prof. Nilofar H Pathan 1
RESEARCH ARTICLE VIBRATION ANALYSIS OF SPUR GEAR BY MASS REDUCTION AND CHANGING MATERIAL Prof. Nilofar H Pathan 1 1 Assistant Professor P K Technical Campus, Chakan Mech. Engineering Department,Savitribai
More information