SERVICE DATA TRIMMER/BRUSHCUTTER KIORITZ CORPORATION F-00 SRM-260 SRM-261 Series 1
|
|
- Brittany Eaton
- 5 years ago
- Views:
Transcription
1 10-25F-00 SRM-260 SRM-261 Series 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER SRM-260 (Serial number : ~ ) SRM-260S (Serial number : ~ ) SRM-260U (Serial number : ~ ) SRM-260SB (Serial number : ~ ) SRM-261 (Serial number : ~ ) SRM-261S (Serial number : ~ ) SRM-261U (Serial number : ~ ) SRM-261SB (Serial number : ~ ) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications and directions in this SERVICE DATA are based on the latest products information available at the time of publication. CONTENTS page 1 SERVICE INFORMATION Specification Technical data Torque limits Special repairing materials Service limits... 5 Reference No F-00 ISSUED: KIORITZ CORPORATION
2 2 SERVICE INFORMATION SRM-260 SRM-261 Series 1-1 Specifications Model SRM-260 SRM-260S SRM-260SB SRM-260U SRM-261 SRM-261S SRM-261SB SRM-261U Dimensions* Length mm(in) 1795 (70.7) 1825 (71.9) 1795 (70.7) Width mm(in) 250 (9.84) 711 (28.0) Height mm(in) 250 (9.84) (18.84) Dry weight* kg(lb) 5.12 (11.3) 4.92 (10.8) 5.3 (11.7) 6.5 (14.3) Engine Type KIORITZ, air-cooled, two-stroke, single cylinder Rotation Counterclockwise as viewed from the output end Displacement cm 3 (in 3 ) 25.4 (1.55) Bore mm(in) 34.0 (1.34) Stroke mm(in) 28.0 (1.10) Compression ratio 6.2 Carburetor Type Diaphragm, horizontal-draught, with primer Model Walbro WYJ-315A Ignition Type CDI (Capacitor discharge ignition) Spark plug Variable Slope Timing (VST) : Slope advance ignition combined with electronic speed governor BPM8Y Exhaust Muffler type SRM-260, SRM-260S, SRM-260SB, SRM-260U Spark arrestor muffler SRM-261, SRM-261S, SRM-261SB, SRM-261U Spark arrestor muffler with catalyst Starter Type Automatic rewind Rope diameter x length mm(in) 3.5 x 850 (9/ 64 x 33 1/2) Fuel Type Premixed two-stroke fuel (Refer to Operator s manual.) Two-stroke engine oil ISO-L-EGD (ISO/CD13738) and J.A.S.O. FC Standards Tank capacity L (U.S.fl.oz.) 0.58 (19.6) Clutch Type Centrifugal, 2-shoe pivot Handle Type Front Crescent loop with cushion grip Rear Integrated control grip with cushion Drive shaft Type Flexible Solid Flexible Flexible Diameter - Length mm (in) ( ) ( ) ( ) ( ) Housing OD - ID mm (Main pipe) (in) (0.98-7/8) ( ) (0.98-7/8) Length mm(in) 1500 (59.1) 756 (29.8) 1500 (59.1)
3 SRM-260 SRM-261 Series SERVICE INFORMATION Specifications (continued) Gear case Reduction ratio 1.4 Gear tooth Lubrication Spiral bevel gear Lithium based grease or ECHO LUBE TM Cutter Type Nylon line cutter, 8-tooth blade, 80-tooth blade, Others Pilot diameter mm(in) 20.0 (0.79) Option Fastener type, size mm Left-hand thread nut, M10 x 1.25 pitch Cutting rotation OD: Outer diameter. ID: Inner diameter. Counterclockwise as viewed from top * Without shoulder harness and Nylon line head. ** Refer to Operator s manual. Install and use U-shaped handle and metal blade kit when operating any model with blade. 1-2 Technical data Engine Idling speed r/min Wide open throttle speed r/min 8500 Engine speed at beginning of clutch engagement r/min Compression pressure Mpa (kgf/cm 2 ) (psi) 0.85 (8.5) (120) Ignition Spark plug gap mm (in) ( ) Minimum secondary voltage at 1500 r/ min kv 13 Secondary coil resistance ký Pole shoe air gaps mm (in) ( ) Ignition timing at 1000r/min BTDC 16.5 at 3000r/min BTDC 25.0 at 8500r/min BTDC 33.0 at 11000r/min BTDC 13.0 Carburetor Venturi Size mm(in) 12.2 (0.48) Throttle Bore mm(in) 12.2 (0.48) Main jet #41.5 Test Pressure, minimum MPa (kgf/cm 2 ) (psi) 0.05 (0.5) (7.0) Metering lever height mm (in) 1.35 (0.053) lower than diaphragm seat BTDC: Before top dead center.
4 4 SERVICE INFORMATION SRM-260 SRM-261 Series 1-3 Torque limits Descriptions Size kgf cm N M in lbf Starter Ignition Fuel Starter pawl assembly M Starter case M 4* Flywheel M Ignition coil M 5* Fan cover M 5* Spark plug M Carburetor M Intake insulator M Fuel tank M 5* Clutch Clutch shoe M Engine Crankcase M Cylinder M Muffler M 5* Exhaust guide M Muffler cover M 5* Top guard M 5* Other Stand Starter side M 5* Regular bolt, nut, and screw Fan case side M 5* Cutter fastener LM *Apply thread locking sealant. (See below) M M M M M Special repairing materials Material Location Remarks Grease Drive shaft Gear case Rewind spring Starter center post Oil seal inner lips Lithium based grease or ECHO LUBE TM Thread locking Starter case sealant Fuel tank Loctite #648 or equivalent Ignition coil Fan cover Top guard Loctite #222, Three Bond #1342 or equivalent Stand Muffler cover Muffler Loctite #242, ThreeBond #1327 or equivalent
5 SRM-260 SRM-261 Series SERVICE INFORMATION Service limits Description mm (in) Cylinder bore When plating is worn and aluminum can be seen Piston outer diameter Min (1.335) Piston pin bore Max (0.316) Piston ring groove Max. 1.6 (0.063) Piston ring side clearance Max. 0.1 (0.004) Piston pin outer diameter Min (0.314) Piston ring width Min (0.057) Piston ring end gap Max. 0.5 (0.02) Con-rod small end bore Max (0.43) Crankshaft runout Max (0.002)
SERVICE DATA. SRM-230U (Serial number : ~ ) SRM-231U (Serial number : ~ ) TRIMMER/BRUSHCUTTER KIORITZ CORPORATION
10-22E-00 SRM-230 SRM-231 Series 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER SRM-230 (Serial number : 05001001~05999999) SRM-230S (Serial number : 05001001~05999999) SRM-230U (Serial number : 05001001~05999999)
More information10-25J-00 SRM-261T 1 INTRODUCTION. Reference No J-00 ISSUED:
10-25J-00 SRM-261T 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationINTRODUCTION. Reference No S-01 REVISED:
10-21S-01 GT-225, SRM-225 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More information80-52A-00 EA Reference No A-00 ISSUED:
80-52A-00 EA-500 1 lntroduction We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationSERVICE MANUAL SUPPLEMENT
21-63H-01 PB-770H, PB-770T 1 SERVICE MANUAL SUPPLEMENT 2 ECHO: PB-770H ECHO: PB-770T INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment
More information00-33A-01 CS-330T, CS-360T 1
00-33A-01 CS-330T, CS-360T 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More informationSERVICE DATA GT-220ES SRM-220ES TRIMMER/BRUSHCUTTER. (Serial nember : and after) (Serial nember : and after) INDEX INTRODUCTION
10-21P-02, 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change
More information01-36D-02 CS INTRODUCTION. Reference No D-02 ISSUED:
01-36D-02 CS-370 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationSERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL. (Serial number : and after) INTRODUCTION CONTENTS
10-21V-00 SRM-236ES 1 * 1 SERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products.
More informationSERVICE DATA. CS-310 (Serial number : ) (Serial number : ) CHAIN SAW 01-30A-00 CS CONTENTS INTRODUCTION
01-30A-00 CS-310 1 0 SERVICE DATA CHAIN SAW CS-310 (Serial number : 11000001-11999999) (Serial number : 12000001-12999999) INTRODUCTION We are constantly working on technical improvement of our products.
More informationINDEX INTRODUCTION. Reference No L-01 REVISED:
12-21L-01 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationINTRODUCTION. Reference No L-01 R E V I SED :
10-25L-01 SRM-265ES 1 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All
More informationSERVICE DATA POWER PRUNER ECHO: PPF-300ES ECHO: PPT-300ES. (Serial number : and after) CONTENTS INTRODUCTION
17-28A-00, 1 1 SERVICE DATA We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationSERVICE MANUAL SUPPLEMENT
01-34C-00 CS-352 1 0 SERVICE MANUAL SUPPLEMENT CHAIN SAW ECHO: CS-352 (Serial number : 11000001-11999999) (Serial number : 12000001-12999999) (Serial number : 13000001-13999999) INTRODUCTION We are constantly
More information21-25F-00 PB-251, PB-255ES, ES-255ES 1
21-25F-00 PB-251,, ES-255ES 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More information21-21H-00 PB-2100,PB-2155,PB-2200SI 1
21-21H-00 PB-2100,,PB-2200SI 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More information00-36A-04 CS-350T, CS-350TES, CS-350WES 1
00-36A-04,, 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationSERVICE DATA PPF-2100 PPT-2100 PPT-2400 PPFD-2400 POWER PRUNER 17-21C-00 INDEX. with new gear case INTRODUCTION CONTENTS
17-21C-00 1 1 SERVICE DATA POWER PRUNER with new gear case INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject
More informationSERVICE DATA CHAIN SAW ECHO: CS-280WES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-00 ISSUED:
00-27B-00 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,
More informationSERVICE DATA CHAIN SAW ECHO: CS-500ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION
01-50D-01 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,
More informationSERVICE DATA CHAIN SAW CS-450. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-01 REVISED: ISSUED:
01-45B-01 1 0 SERVICE DATA CHAIN SAW (Serial number : 36000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and
More informationSERVICE DATA CHAIN SAW ECHO: CS-352ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION
01-34D-01 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,
More informationBRUSH CUTTER MODEL SRM-2100 SERIAL NUMBER & UP MODEL SRM-2110 SERIAL NUMBER & UP PARTS CATALOG ECHO, INCORPORATED
PARTS CATALOG BRUSH CUTTER MODEL SRM-00 SERIAL NUMBER & UP MODEL SRM-0 SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, ILLINOIS 00 WWW.ECHO-USA.COM 00 ECHO, Incorporated. All Rights
More informationTRIMMER/BRUSH CUTTER PARTS CATALOG MODELS SRM-3800 TYPE 1
TRIMMER/BRUSH CUTTER PARTS CATALOG MODELS SRM-3800 TYPE 1 SERIAL NUMBER 0001 & UP MODELS SRM-3800 TYPE 1E SERIAL NUMBER 0001 & UP ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 004 2224 0/ ENGINE,
More informationBRUSH CUTTER MODEL SRM-2100 TYPE 1E SERIAL NUMBER & UP MODEL SRM-2110 TYPE 1E PARTS CATALOG ECHO, INCORPORATED
PARTS CATALOG BRUSH CUTTER MODEL SRM-00 TYPE E SERIAL NUMBER 0000 & UP MODEL SRM-0 TYPE E SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, ILLINOIS 00 WWW.ECHO-USA.COM 00 ECHO, Incorporated.
More informationHEDGE CLIPPER MODEL HC-1600
PARTS CATALOG HEDGE CLIPPER MODEL HC-00 SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, IL 00 0 0/ HC-00 ENGINE, CRANKCASE, COVER 0 ENGINE, CRANKCASE, COVER KEY PART NUMBER QTY
More informationSHRED 'N' VAC PLUS PARTS CATALOG MODEL ES-2100 TYPE 1 TYPE 1E
SHRED 'N' VAC PLUS PARTS CATALOG MODEL ES-00 TYPE TYPE E SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, IL 00 www.echo-usa.com Copyright 00 ECHO, Incorporated. All Rights Reserved
More informationENGINE MODEL SV-4B TYPE 1E PARTS CATALOG ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, ILLINOIS SERIAL NUMBERS: & UP
PARTS CATALOG ENGINE MODEL SV-B TYPE E SERIAL NUMBERS: 000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, ILLINOIS 00 WWW.ECHO-USA.COM 00 ECHO, Incorporated. All Rights Reserved 0 REVISED 0//0 SV-B
More informationTRIMMER/BRUSH CUTTER PARTS CATALOG SRM-210: SRM-210 : SRM-210SB: SRM-210U: SRM-211: SRM-211 : SRM-211SB: SRM-211U:
AVAILABLE ATTACHMENTS & ACCESSORIES PRO MAXI-CUT HEAD 000 ECHOMATIC HEAD 00 UNIVERSAL TRIMMER HEAD 00 RAPID LOADER LINE HEAD 000 SRM MANUAL DUAL LINE HEAD 000 " 0 TOOTH BRUSH BLADE 000 " TOOTH BLADE 0000
More information1900E Page 1 of 24 Air Filter & Insulator
1900E Page 1 of 24 Air Filter & Insulator 1900E Page 2 of 24 Air Filter & Insulator Ref # Part Number Qty S/P/F Description 1 GM010176 1 SCREW, CHOKE COVER (25cc) GM010120 1 SCREW, CHOKE COVER (21cc) 2
More informationSRM-230 Trimmer PARTS CATALOG MODEL:SERIAL NUMBERS. ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois USA. 22.8cc
OPTIONAL ATTACHMENTS & ACCESSORIES Accessories 5050 U-Handle Kit 9990000 SRM Shoulder Harness Kit 99900 0mm Blade Conversion Kit 999005 Universal Blade Conversion Kit 9990055 Barrier Bar 999005 U-Handle_Blade
More informationSRM-230 Trimmer PARTS CATALOG MODEL:SERIAL NUMBERS. ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois USA. 22.8cc
OPTIONAL ATTACHMENTS & ACCESSORIES Accessories 5050 U-Handle Kit 9990000 SRM Shoulder Harness Kit 99900 0mm Blade Conversion Kit 999005 Universal Blade Conversion Kit 9990055 Barrier Bar 999005 U-Handle_Blade
More informationCHAIN SAW PARTS CATALOG MODEL CS-6700 TYPE 1E SERIAL NUMBER & UP
CHAIN SAW PARTS CATALOG MODEL CS-00 TYPE 1E SERIAL NUMBER 0001 & UP ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 004 999203008 0/03 CS-00 TYPE 1E ENGINE, CRANKCASE, CYLINDER, PISTON 20 1 2 38 39
More informationPage 1 of 26 Air Filter and Insulator
2130 Page 1 of 26 Air Filter and Insulator 2130 Page 2 of 26 Air Filter and Insulator Ref # Part Number Qty S/P/F Description 1 GM010176 1 SCREW, CHOKE COVER (25cc) 1 GM010120 1 SCREW, CHOKE COVER (21cc)
More informationK&T Saw Shop or
12-400030-11 MAC 100A 11/86 to 03/89 IPL 219598-01 Page 1 of 12 Accessories & Replacement Parts www.ktoutdoor.com 12-400030-11 MAC 100A 11/86 to 03/89 IPL 219598-01 Page 2 of 12 Accessories & Replacement
More informationK&T Saw Shop or
13-400030-11 MAC 100A-HD 03/88 to 02/89 IPL 222761-01 Page 1 of 17 Accessories & Replacement Parts www.ktoutdoor.com 13-400030-11 MAC 100A-HD 03/88 to 02/89 IPL 222761-01 Page 2 of 17 Accessories & Replacement
More informationDS 2400 D (EPA 3) Brushcutter. Documents DS 2400 D (EPA 3) Motor. Starter assy and clutch. Air filter. Transmission. Carburetor.
Brushcutter Documents Motor Starter assy and clutch Air filter Transmission Carburetor Brushcutter Hedgetrimmers Blower Pole pruner Extension 7/28/2016 Page 1-23 Illustration Motor 7/28/2016 Page 2-23
More informationSuper 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber
Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover
More informationK&T Saw Shop or
14-400030-11 MAC 100 HD 03/88 to 02/89 IPL 22276-01 Page 1 of 10 Carburetor Assembly 14-400030-11 MAC 100 HD 03/88 to 02/89 IPL 22276-01 Page 2 of 10 Carburetor Assembly 1 224142-02 1 Carburetor Asy (WT
More information1"354 $"5"-0(6& (3"44 53*..&3 #364)$655&3 43. SRM-3550
SRM-3550 4 178121-52930 1 HOLDER, CABLE 5 900162-05025 1 BOLT, H.S. 5*25 5*25 W,SW 6 159905-46430 1 GUARD, TOP 7 159906-46430 1 COLLAR 6.2*12*8 8 101506-46431 1 COVER, CYLINDER 9 900162-05014 3 BOLT, H.S.
More informationIllustrated Parts List. Model Series 09B900 TYPE NUMBERS 0050, 0051, 1651, TABLE OF CONTENTS
Illustrated Parts List Model Series 09B900 TYPE NUMBERS 0050, 0051, 1651, 1652. TABLE OF CONTENTS FORM MS--0651--03/02/2009 REPLACES FORM MS--0651--08/08/2008 FILE IN SECT. 2 OF SERVICE MANUAL 09B900 Air
More informationCHAINSAW PARTS CATALOG. CS-4400 Type 1E: & UP. ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 43.
AVAILABLE ATTACHMENTS & ACCESSORIES 0 CHAIN - " 0 CHAIN - " 0 CHAIN - " 00 BAR - " 0 BAR - " 00 BAR - " 00 FIXED NOSE CASE PARTS CATALOG CHAINSAW.cc MODEL: SERIAL NUMBERS CS-00 Type E: 0 & UP ECHO, INCORPORATED
More information330 Chain Saw UT Page 1 of 17 Chain Brake and Chain Stop
330 Chain Saw UT-10609 Page 1 of 17 Chain Brake and Chain Stop 330 Chain Saw UT-10609 Page 2 of 17 Chain Brake and Chain Stop 1 80983 3 SCREW- (8-32 x 1/2) 2 70705 1 STOP- Chain 3 88048 1 SCREW- (10-24
More informationK&T Saw Shop or
11-400128-24 MAC 2825 01/92 to 10/92 IPL 211237 Page 1 of 13 Carburetor Assembly www.ktoutdoor.com 11-400128-24 MAC 2825 01/92 to 10/92 IPL 211237 Page 2 of 13 Carburetor Assembly 224033-02 Carburetor
More informationrev 2_07/17/17 EN5950SH MH-246.4DS
1 Shaft, Handle 16 9 7 1 8 6 38 11 15 10 3 2 218 4 37 A04 2 1 Shaft, Handle 1 1 195626-2 LOOP HANDLE SET 1 1 INC. 6-9,16 1 2 326036-4 SHAFT 1 1 1 3 142145-9 SHAFT PIPE COMPLETE 1 1 1 4 126281-9 TRIMMER
More informationK&T Saw Shop or
11-400132-34 EAGER BEAVER 325 BC 01/92 to 04/93 IPL 211234 Page 1 of 14 Carburetor Assembly www.ktoutdoor.com 11-400132-34 EAGER BEAVER 325 BC 01/92 to 04/93 IPL 211234 Page 2 of 14 Carburetor Assembly
More informationK&T Saw Shop or
11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 1 of 12 Carburetor Assembly www.ktoutdoor.com 11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 2 of 12 Carburetor Assembly 1 224142-03 1 Carburetor
More informationCHAINSAW PARTS CATALOG CS-346: ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 33.
AVAILABLE ATTACHMENTS & ACCESSORIES 0 CHAIN - " 0 CHAIN - " 0 CHAIN - " 00 GUIDE BAR - " 00 GUIDE BAR - " 00 GUIDE BAR - " 0 GUIDE BAR - " INTENZ 0 GUIDE BAR - " INTENZ 0 GUIDE BAR - " INTENZ 000 REMOVABLE
More informationIllustrated Parts List 9B900
FORM MS 0651 09/04/2007 REPLACES FORM MS 0651 06/21/2007 FILE IN SECT. 2 OF SERVICE MANUAL 9B900 Illustrated Parts List Model Series 9B900 TYPE NUMBERS 0050, 0051, 1651, 1652. TABLE OF CONTENTS Air Cleaner.........................
More informationrev 5_ EX2650LH CS C CS-246.4CBC
CS-246.4 C BC 1 Main Pipe Assembly, Handle A15 A14 A13 A03 A12 2 1 Main Pipe Assembly, Handle 1 2 451601-1 SPACER 1 1 1 1 3 141238-9 SHAFT COMPLETE 1 1 1 1 4 195143-2 HANGER SET 1 1 1 INC. 5 1 5 911233-1
More informationRK-33 BRUSH CUTTER - FIG 1
BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 2 BRUSH CUTTER - FIG 3 BRUSH CUTTER - FIG 1 150 2090198 ANGLE TRANSMISSION 73.38 150-1 2820020 GEAR HOUSING 10.69 150-2 2200029 SPIRAL BEVEL GEAR 7.05 150-3 2200028
More informationSuper XL 925 Chain Saw UT Page 1 of 15 Carburetor Chamber
Super XL 925 Chain Saw UT-10415 Page 1 of 15 Carburetor Chamber Super XL 925 Chain Saw UT-10415 Page 2 of 15 Carburetor Chamber 1 63370A 1 RETAINER- Reed valve 2 63166A 4 VALVE- Reed 3 63371B 1 SEAT- Reed
More informationOnderdelen voor CG25EUS(LA)
1 307635 MACHINE SCREW M4X10 (W/SP.WASHER) 3 2 6696440 CYLINDER HEAD COVER ASS'Y 1 4 6696438 PIVOT ROCKER ARM 2 5 6696437 PUSH ROD 2 6 6696432 TAPPET 2 7 6696442 BREATHER PIPE 1 8 6696439 ROCKER ARM 2
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2053
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 523 11 16-01 BOX SPANNER 1 2 523 11 23-01 WRENCH 1 3 523 11 18-01 LEVER HANDLE 1 4 523 11 17-01
More informationUnit: mm (in) ITEM STANDARD LIMIT IN. 33 (1.3) EX.
Model: DR650SEL0 E-03, 24, 28, 33 Date: July 16, 2009 SERVICE DATA VALVE + GUIDE Valve diam. Valve clearance (when engine is cold) Valve guide to valve stem clearance Valve stem deflection Valve guide
More informationDrawing A Crankcase, Cylinder
Drawing A Crankcase, Cylinder 1 Drawing A Crankcase, Cylinder Reference Item number Qty Description 1 4241 021 0300 1 Crankcase 2 9639 003 1230 2 Oil seal 12x22x7 3 9523 003 0000 2 Grooved ball bearing
More informationMcCULLOCH. Stroke. 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.)
SERVICE MANUAL Model Eager Beaver 2010, Mac 3210 Silver Eagle 2012 Eager Beaver 2014, Mac 3214, Silver Eagle 2014 Eager Beaver 2016, Mac 3216, Silver Eagle 2016 Bore Stroke DispL (2.1 cu. in.) (2.1CU.
More informationK&T Saw Shop or
12-400060-06 TITAN 2030 12/94 to 09/96 IPL 211632 Page 1 of 11 Special Tools & Accessories www.ktoutdoor.com 12-400060-06 TITAN 2030 12/94 to 09/96 IPL 211632 Page 2 of 11 Special Tools & Accessories 222785
More informationrev 6_05/23/18 EN7350SH
1 Shaft, Handle 16 9 7 1 8 6 38 11 15 10 3 2 218 4 A04 37 2 1 Shaft, Handle 1 1 195626-2 LOOP HANDLE SET 1 INC. 6-9,16 1 2 326036-4 SHAFT 1 1 6 346467-1 CLAMP 24 1 1 7 346468-9 CLAMP 33 1 1 8 452841-4
More informationIllustrated Parts List to
TYPE NUMBERS 0001 through 0026, 0027 through 0049, 0059 through 0075, 0079 through 0093, 0105 through 0128, 0129 through 0169, 0171 through 0200, 0202 through 0217, 0219 through 0238, 0240 through 0256,
More informationSERVICE DATA ITEM STD/SPEC. LIMIT. ( in) 1st & 2nd R Approx. 8.2 mm (0.32 in)
2 STROKE CYLINDER + PISTON + PISTON RING CONROD + CRANKSHAFT CLUTCH SERVICE DATA Piston to cylinder clearance 0.045 0.055 mm (0.0018 0.0022 in) 0.120 mm (0.0047 in) Cylinder bore Piston diam. Cylinder
More informationDS 2800 S Brushcutter - Engine
Page 1 of 15 DS 2800 S Brushcutter - Engine Page 2 of 15 DS 2800 S Brushcutter - Engine 1 1 50060012 Air purge 2 1 61280102R Cylinder cover BT3-090- 03/10 3 1 4191069B Plate matr.2220420945 BT3-102- 4
More informationK&T Saw Shop or
12-400062-04 TITAN 2310 12/93 to 09/96 IPL 211533 Page 1 of 11 Carburetor Assembly www.ktoutdoor.com 12-400062-04 TITAN 2310 12/93 to 09/96 IPL 211533 Page 2 of 11 Carburetor Assembly 1 224142-02 Carburetor
More informationIllustration Engine. 746 T Brushcutter. 13/2/2017 Page Copyright EMAK S.P.A.
Documents Technical information Weight Power/Displacement Tube diameter Grip Clutch Fuel tank capacity 8.1 Kg 2.5 HP - 1.8 kw/45.7 cm³ 32 mm handlebar yes 1.50 L Engine Starter assy and clutch Transmission
More informationrev 6_07/17/17 EN4950H
1 Shaft, Handle C40 C30 C20 A03 C50 C10 4 38 5 8 222 6 37 9 3 218 1 A04 2 1 Shaft, Handle 1 1 135683-8 TRIMMER HEAD ASS Y 1 1 1 126303-5 TRIMMER HEAD ASS Y 1 1 3 324893-4 SHAFT 1 1 4 195143-2 HANGER SET
More informationModel 16CG5AMQ
Model 16CG5AMQ 1 16 2 7 27 53 35 22 16 2 32 15 33 30 13 19 17 12 3 3 37 6 29 7 36 50 2 25 36 5 31 21 20 51 1 10 1 39 5 0 3 9 3 9 1 2 5 52 11 6 26 1 Model 16CG5AMQ Ref. Part Number Description 1 61-0035-0637
More informationKPW3500X/KPW3500X-50 LINE TRIMMER/WEEDER/BRUSH CUTTER
2051 Saturn Street Monterey Park, CA 91755 323.728.7266 323.728.5304 Fax http://www.tmcpower.com PARTS CATALOG KPW3500X/KPW3500X-50 LINE TRIMMER/WEEDER/BRUSH CUTTER ENGINE REFERENCE: CARB TIER I REV 050913
More informationWMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte
1 307635 MACHINE SCREW (W/SP. WASHER) M4X10 3 2 6696440 CYLINDER HEAD COVER 1 3 949566 LOCK NUT M5 (10 PCS.) 4 4 6696438 PIVOT ROCKER ARM 2 5 6696437 PUSH ROD 2 6 6696432 TAPPET 2 7 6696442 BREATHER PIPE
More informationHandle-bar and control box. ARTIK 56 EL
Handle-bar and control box 1 Handle-bar and control box Reference Qty Item number Description 1 1 ZM000001 Handlebar 2 2 ZM000002 Lever 3 2 ZM000003 Cap 4 2 ZM000067 Lever connecting shaft 5 1 ZM000005
More informationERSATZTEILLISTE. ECHO Motorsense SRM-3155 SRM ECHO-Motorgeräte Vertrieb Deutschland GmbH Otto-Schott-Str Metzingen
Stand 07.02.2002 ERSATZTEILLISTE ECHO Motorsense SRM-3155 SRM-3605 ECHO-Motorgeräte Vertrieb Deutschland GmbH Otto-Schott-Str. 7 72555 Metzingen Telefon 07123-1091 Telefax 07123-2589 http://www.echo-shop.de
More informationCraftsman Snow Thrower Model PARTS LIST
Craftsman Snow Thrower Model 24.88955 11 13 3 26 24 9 1 18 54 6 25 15 20 23 16 5 14 1 55 9 4 4 28 8 30 2 5 56 35 36 46 3 39 50 53 43 38 48 52 42 51 41 40 49 4 44 31 45 31 21 29 34 9 19 10 32 22 26 Craftsman
More informationIllustrated Parts List
FORM MS 4183 10/31/2006 REPLACES FORM MS 9748 7/1997 FILE IN SECT. 2 OF SERVICE MANUAL 290700 Illustrated Parts List Model Series 290700 TYPE NUMBERS 0100, 0102, 0106, 0107, 0108, 0333, 0402, 0410. TO
More informationK&T Saw Shop or
11-400056-02 MAC 22 GHT 05/94 to 05/96 IPL 211538 Page 1 of 12 Carburetor Assembly www.ktoutdoor.com 11-400056-02 MAC 22 GHT 05/94 to 05/96 IPL 211538 Page 2 of 12 Carburetor Assembly 322739-01 1 Carburetor,
More informationENGINE SPECS COMMON SPECIFICATIONS & PROCEDURES LEGACY & OUTBACK COMMON SPECIFICATIONS & PROCEDURES
1Search Print Date: 17/01/017 ENGINE SPECS COMMON SPECIFICATIONS & PROCEDURES LEGACY & OUTBACK COMMON SPECIFICATIONS & PROCEDURES 015 Subaru Legacy 3.6L Eng 3.6R Limited System Specification/Procedure
More informationDrawing A Crankcase 041 AV SCS
Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18
More informationIllustrated Parts List 12F800
FORM MS 0517 09/21/2004 REPLACES FORM MS 0517 06/16/2004 FILE IN SECT. 2 OF SERVICE MANUAL 12F800 Illustrated Parts List Model Series 12F800 TYPE NUMBERS 0600 through 3511. TABLE OF CONTENTS Alternator..........................
More informationValve + Valve Guide Unit: mm (in) Item Standard Limit Valve diam. IN (1.20) EX (1.06) Valve clearance (when cold)
Model: LT-A400FL9 P-17, 24, 28,03 Date: Feb. 12, 2018 SERVICE DATA Valve + Valve Guide Valve diam. IN. 30.6 (1.20) EX. 27.0 (1.06) Valve clearance (when cold) IN. 0.05 0.10 (0.002 0.004) EX. 0.22 0.27
More informationRepair Manual 11/99 PS-34. Page 1
Repair Manual /99 PS-4 Page Table of contents Index Technical Data page Special tools 4 Repair instructions, general 0 Chain brake 6 0 Centrifugal clutch 8 0 Oil pump 9-04 Ignition system - 0 Starting
More information300 Chain Saw UT Page 1 of 16 Accessories I
300 Chain Saw UT-10687 Page 1 of 16 Accessories I 300 Chain Saw UT-10687 Page 2 of 16 Accessories I Ref # Part Number Qty Description A-02177 A02177 1 BUMPER SPIKE KIT 9477299 9477299 1 RUBBER TUBING (10')
More informationCHAIN SAWS G561AVS G621AVS
2626-93121 CHAIN SAWS G561AVS G621AVS APPLICABLE SERIAL NUMBERS: OCTOBER 1998 G561AVS 814608 and up G621AVS 820954 and up Fig.1 1 Fig.2 2 Fig.1 1 1 2616-12112 2618-12115 CYLINDER 1 K4 2 3356-12141 GROMMET
More informationPARTS CATALOG ENGINE CUTTER CSG-6700 CSG-6700
PARTS CATALOG ENGINE CUTTER 1. Cylinder, Crankcase, Piston 5 900162-05020 6 BOLT, H.S. 5*20 5*20 W,SW 6 101001-32431 1 CYLINDER ASSY 4 + 101010-32431 1 GASKET, CYL. BASE 3 100000-32431 1 PISTON KIT 3 100000-32432
More information245 Chain Saw UT Page 1 of 16 Air Filter & Handles & Oil Pump
245 Chain Saw UT-10631 Page 1 of 16 Air Filter & Handles & Oil Pump 245 Chain Saw UT-10631 Page 2 of 16 Air Filter & Handles & Oil Pump Ref # Part Number Qty Description 1 80870 1 SCREW- 10-32 x 3/8 2
More informationIllustrated Parts List. Model Series. TYPE NUMBERS 0104 through TABLE OF CONTENTS
Illustrated Parts List Model Series 094200 TYPE NUMBERS 0104 through FORM MS--5529--04/03/2009 REPLACES FORM MS--5529--08/05/2008 FILE IN SECT. 2 OF SERVICE MANUAL 094200 TABLE OF CONTENTS Air Cleaner...
More informationIllustrated Parts List. Model Series. TYPE NUMBERS 0035 through TABLE OF CONTENTS
Illustrated Parts List Model Series TYPE NUMBERS 0035 through 0563. TABLE OF CONTENTS FORM MS--6359--08/04/2009 REPLACES FORM MS--6359--10/07/2008 FILE IN SECT. 2 OF SERVICE MANUAL Air Cleaner... 5 Alternator...
More informationIllustrated Parts List 28N700
FORM MS 0148 09/14/2004 REPLACES FORM MS 0148 4C 12/1/2003 FILE IN SECT. 2 OF SERVICE MANUAL Illustrated Parts List Model Series TYPE NUMBERS 0026 through 1205. TABLE OF CONTENTS Air Cleaner.........................
More informationrev 5_ EA4300F40B (Makita Teal) EA4300FR (Makita Red) PS-421 (Dolmar Red)
(Makita Teal) (Makita Red) (Dolmar Red) 1 Tank, Handle 1 79 10 11 9 19 8 13 12 14 20 18 3 7 6 5 2 4 18 19 20 16 24 18 19 17 22 22 23 18 21 19 20 21 23 2 1 Tank, Handle 1 1 195-114-650 TANK CPL. BLUE 1
More informationParts Explosions. A. Gear Housing Assembly - Single Edge Hedge Trimmer. B. Gear Housing Assembly - Double Edge Hedge Trimmer
Parts Explosions A. Gear Housing Assembly - Single Edge Hedge Trimmer B. Gear Housing Assembly - Double Edge Hedge Trimmer 1 71 Pinion 1 7 Washer 1 7 Upper Bushing 1 00000 Gear Hsg Assem. (inc. No., 6,
More informationIllustrated Parts List. Model Series 09S500. TYPE NUMBERS 0520 through TABLE OF CONTENTS. Air Cleaner... 5 Blower Housing/Shrouds...
Illustrated Parts List Model Series 09S500 FORM MS3727--09/30/2010 REPLACES FORM MS3727--08/10/2010 FILE IN SECT. 2 OF SERVICE MANUAL 09S500 TYPE NUMBERS 0520 through 3707. TABLE OF CONTENTS Air Cleaner...
More informationIllustrated Parts List to
TYPE NUMBERS 0022 through 0035, 0040 through 0062, 0070, 0076,0100, 0102, 0120 through 0125, 0307, 0318,0320, 0326, 0340 through 0366, 0370 through 0378, 0382, 0385, 0390, 0391, 0394, 0398, 0402, Illustrated
More informationSXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber
SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationIllustrated Parts List 12H800
FORM MS 0990 09/22/2004 REPLACES FORM MS 0990 06/21/2004 FILE IN SECT. 2 OF SERVICE MANUAL 12H800 Illustrated Parts List Model Series 12H800 TYPE NUMBERS 0652 through 6699. TABLE OF CONTENTS Alternator..........................
More informationK&T Saw Shop or
16-400028-15 TITAN 2000 02/95 to 09/96 IPL 211517 Page 1 of 11 Carburetor Assembly www.ktoutdoor.com 16-400028-15 TITAN 2000 02/95 to 09/96 IPL 211517 Page 2 of 11 Carburetor Assembly 1 224142-02 Carburetor
More informationXL12 Chain Saw UT Page 1 of 21 Carburetor Chamber
XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationSuper EZ Chain Saw UT Page 1 of 18 Tools And Accessories
Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295
More informationIllustrated Parts List 9J900
FORM MS 3278 08/31/2007 REPLACES FORM MS 3278 06/18/2007 FILE IN SECT. 2 OF SERVICE MANUAL 9J900 Illustrated Parts List Model Series 9J900 TYPE NUMBERS 0100, 0111, 0115, 0116, 0292, 0304, 0340, 0341, 0368,
More informationIllustrated Parts List 10D900
FORM MS 6379 07/10/2008 REPLACES FORM MS 6379 05/20/2008 FILE IN SECT. 2 OF SERVICE MANUAL 10D900 Illustrated Parts List Model Series 10D900 TYPE NUMBERS 0100 through 5000. TABLE OF CONTENTS Air Cleaner.........................
More informationIllustrated Parts List. Model Series. TYPE NUMBERS 0015 through TABLE OF CONTENTS
Illustrated Parts List Model Series 121600 TYPE NUMBERS 0015 through 0668. TABLE OF CONTENTS FORM MS--2143--11/12/2008 REPLACES FORM MS--2143--09/16/2008 FILE IN SECT. 2 OF SERVICE MANUAL 121600 Air Cleaner...
More informationBrushcutter Emak S.p.A.
Brushcutter - Motor Meccanografico RE 005145 C/C Postale 11178423 Partita IVA 00130010358 Codice Fiscale 00130010358 1 / 21 Meccanografico RE 005145 C/C Postale 11178423 Partita IVA 00130010358 Codice
More informationNot for Reproduction ADVANCE PRODUCT SERVICE INFORMATION APSI NO: 101 DATE: AUGUST SERIES UTILITY ENGINE 130G00 OHV HORIZONTAL SHAFT
ADVANCE PRODUCT SERVICE INFORMATION APSI NO: 101 DATE: AUGUST 2014 SUBJECT: MODELS: 950 SERIES UTILITY ENGINE 130G00 OHV HORIZONTAL SHAFT This APSI provides basic servicing information in advance of the
More information365-SUB Engine : Engine Assembly 365-SUB [1/1] Page 1 of 5
Page 1 of 5 1 951-11012 Bolt 2 951-11054 Valve Cover 2 951-11054 1 Valve Cover 3 731-07059 Breather Hose 4 726-04101 Hose Clamp 6 N/A 1 Intake Valve Spring Seat 7 751-11124 Pivot Locking Nut 7 751-11124
More information