Parts Identification. *APX90 Shown
|
|
- Ariel Johnston
- 5 years ago
- Views:
Transcription
1 APX80A/APX80E APX90A/APX90E Rim Clamp Tire Changers For servicing single piece automotive and most tubeless light truck tire/wheel assemblies. Any other type, including tube type and agricultrual, require special handling. Tires identifi ed as truck tires need to adhere to OSHA standard *APX90 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors and operators J. P. Hennessy Drive, LaVergne, TN USA / /688/ Manual Part No.: HENNESSY INDUSTRIES INC. Manufacturer of AMMCO, COATS and BADA Automotive Service Equipment and Tools. Revision: 10 /18
2 Parts Identification The following pages include parts breakdowns with exploded view illustrations to help with ordering replacement or spare kits. Assemblies are noted where it is recommended that individual parts not be ordered separately. Note that the parts view illustrations are for multiple models and not all parts shown are on all models. Every effort is made to supply accurate exploded views, however, due to interim changes in manufacturing operations, some units may not be exactly as illustrated. 2 COATS Tire Changer
3 Table of Contents Parts Identification...2 Lift Assembly (If equipped)...4 Chassis Assembly...5 Foot Pedal Assembly (Air)...6 Foot Pedal Assembly (Elec.)...7 Table Top Assembly...8 Shaft Housing Assembly...9 BL Arm Assembly...10 Horizontal Slide Assembly...11 Pressure & Inflation Bracket Assemblies...12 Tilt Tower Assembly Tilt Tower Assembly Robo Arm Assembly...18 Robo Roller Arm Assembly (If equipped)...19 Cylinder Assemblies...20 Valve Assemblies...22 Pneumatic Diagram...24 Electric Schematic...26 Notes...27 Rim Clamp Tire Changer...28 COATS Tire Changer 3
4 Lift Assembly (If equipped) Lift /8 Whiz Lock Screw, Gr Lift Shaft Cylinder Mount Channe Lift Spacer /8 x 1 Cotter Pin /2 Flat Washer Lift Cylinder Assembly /4 x 1/2 Clevis Pin Self Tapping Bolt Lift Mount Bracket Whiz Lock Nut, Gr Lift Arm Pedal /4-20 X 1.75 BHCS Lift Foot Pedal , Nylock Hex Nut Lift Bar Pedal /16-18 X 3/4 WHC Screw /8 X 3/8 X 5/16-18 Shoulder Bolt 20 *** Lift Valve Assembly Retaining Ring /4 SAE Washer Tilt & Lift Cylinder Shaft Cylinder Mount Bottom Channel Valve Block Spacer Pedal Guard /4 Hex Hd Self Tap Screw, Gr.5 ** See Cylinder Assemblies pgs *** See Valve Assemblies pgs COATS Tire Changer
5 Chassis Assembly /8 Whiz Lock Screw, Gr /8-16 x 2-1/2 HWHCS Screw, Gr /4 Hex Hd Self Tap Screw, Gr Front B.L. Cov B.L. Pads Hex Head Bolt 7 ** Tilt Tower Cylinder Assemb /8-16 x 1-1/4 HHCS, Gr /8-16 x 2 Set Scre /4-10 UNC Lock Nut Med. High Press Spring Whiz Lock Nut, Gr Tilt Tower Guide Plate Cushion Hose x Filter/Lube Bracket Reg/Gauge Assembly Manifold Kit w/fittings Side Cover Std. Pedal Covers /4 SAE Washer ID x x.065 Washer Pressure Regulator Bracket Tank Reservoir w/cap Tank Reservoir Cap (Screw-on Style) Hold Down Reservoir Bar HWHSTCS, 3/8-16X.860 Screw Steel Tube Spacer, 1 OD x.761 ID Trim Edge ** See Cylinder Assemblies pgs COATS Tire Changer 5
6 Foot Pedal Assembly (Air) Bar-Valve Brkt. Spacer Sleeve-Torsion Spring Bearing-Nyliner, 1/ Pedal, Standard Pedal Spacer Spacer-Pedal /4-20 Nylon Insert Lock Nut Gr Spring Stop Bracket Torsion Spring Clevis Pin Clevis Pin 3/16 x 1-1/ Hair Pin Cotter Hx.Hd.Cp.Scr., 1/4-20 x 1, Gr Washer - Stop Extension Spring, Pedal Nylon Insert Lock Nut Gr Lever Assembly - Switch x 3/8 SHCSS,Gr Spacer - Sw Pedal Lever-Red Lever-Cam Follower Wave Washer, 5/16 I.D /16 Flat Washer Pedal Stop Cotter, Hair Pin Washer Pedal Shaft Switch Valve Bracket *** Valve Assemblies (available only as individual components, see pgs ) 6 COATS Tire Changer
7 Foot Pedal Assembly (Elec.) /4 Hex Hd Self Tap Screw, Gr x 3/8 SHCS, Gr x 3/4 SHCS Cam Mounting Block 41 *** Tilt Tower Pedal Valve Assembly 42 *** Table Top Clamp Pedal Valve Assy 43 *** Air Motor Pedal Valve Assembly Spacer-Valve, Clamp TT /16-18 x 1/2 SHSHS Screw Pivot Link Oil Injector Assembly Block-Lower Stop Pedal MM x 12mm HHCS Gr #6 Internal Tooth Lk Washer Reversing Switch Pkg Switch Assembly, 120V 60Hz Switch Assembly, CSA ONLY Switch Assembly, 220V, 50Hz Lever - Switch Actuator x 3/4 Lg. BHSCS Switch Cover Circuit Breaker V 50Hz Circuit Breaker - 25 AMP Release Valve *** Valve Assemblies (available only as individual components, see pgs ) COATS Tire Changer 7
8 Union Tee Fitting,8MM MM x 3 Tube Rotating Union Pivot Plate T.T. Hose Holder Adj. Clamp Link Bolt Pivot Link External Retaining Ring Washer 12x23.86x Cylinder Mounting Shaft Cylinder Assembly, 3 Dia Cylinder Seal Kit Retaining Ring /8 NPT x 8mm 90º Elbow mm Fitting Cap Plug 1-5/8 DIA E Screw-SHCS,M16x40,GR Washer - Molded, ø16mm Slide Stopper x 3/8 SHCS, Gr Position LC Plus Table Top Assembly Plunger, Spring & Housing Clamp Carrier/Cover Clamp Carrier/Cover Male Elbow 1/4 NPT x 3/8 Tube /8-16 x 1-1/4 HHCS, Gr T.T. Plate, Table Top Hub /8-16 x 1 SHCS, Gr.8 30 * Washer - ø2 X ø2 3/4 x * O-ring Seal, 2IDX2-1/8OD SHCS Screw, M6-1X30MM External Retaining Ring (Giuliano Only - Use in place of items 30 & 31) Nylon Insert Lock Nut Gr Position LC Cover Plus (with points) Position LC Cover Plus (without points) Laminated Clamp Plus Grip Shoulder Screw, 1/4 x 1-1/4 x # Y-fitting, 3/4 Barb x 12MM Hose 38 * Table Top Cylinder Seal Kit (Piston, O-rings, Scraper Grip Max Plus LC, Pack of Grip Max Plus LC (external), Pack of Washer-5/8 M16 Lckng Pr 8 COATS Tire Changer
9 Motor, 2 HP, 110V, 60Hz Air Motor, Gast. 6A Motor, 220V, 50Hz Tinnerman Sq. Captive Nut 3/ Motor Bracket Whiz Lock Nut /16 x 1.00 Serrated Washer Hd. Screw Motor Pulley /8-16, Hex Whiz Lock Nut /8-16x1-1/2 HHCS Screw Shaft Housing Assembly /8-16x5 HHCS Screw, Gr /8 Plain Washer Transmission Assembly V Belt, 4L Exhaust Valve Elbow Muffler Capacitor Washer Tube & Dipstick Shaft Housing Assembly COATS Tire Changer 9
10 1 ** B.L. Arm Cylinder Assembly /8 x 1-3/8 Clevis Pin Clevis Clip B.L. Cylinder Rod Pivot Pin /4-10 Nylon Insert Lock Nut, Gr B.L. Arm B.L. Shoe Pivot Bracket /8-11 Nylon Insert Lock Nut Gr Bead Loosener Assembly /8-11 x 5 Hex Hd Cap Scr, Gr B.L. Arm Valve Assembly B.L. Arm Valve Assy (old style) /4-20 x 3/4 Whiz Lock Screw Hitch Pin, ø1/ /4-10 x 3 3/4 HHCS /4x3 1/2 SHSHS Screw Shoulder Screw Bead Loosener Pivot Pin Style BL Arm Assembly Nylon Insert Lock Nut Gr B.L. Lever Assembly /8-16 Hex Nyloc Nut /24 x 1 HHCS Screw Lever Link Neoprene Cushion Clamp /4 Hex Hd Self Tap Screw, Gr /16-18 Whiz Lock Nut B.L. Shoe Assembly, APX Heim Joint Washer Spacer Spacer Screw Decal-Pstn,Shoe,B/L Decal-Ctn,Arm,B/L ** See Cylinder Assemblies pgs *** See Valve Assemblies pgs Bead Loosener Rod End Style 10 COATS Tire Changer
11 Horizontal Slide Assembly 1 *** Hor. Slide Cylinder Assembly Horz. Slide Shaft /8-16 x 1/2 SHSS Screw Bushing (3/4 Valve) /4 Dia. Roller Shaft Ext. Retaining Ring Bearing, 20 x 47 x Roller, 2-3/4 x /8-16 Wash Hd. Lock Nut Gr Hose Retainer Clamp Long Guide Gib /2-13, Nylock Hex Nut, Zinc /8-16 x 1/2 SHSSCP Screw Shoulder Screw Flanged Bushing Horizontal Slide Wave Spring Washer Lock Cam, w/handle Assembly /8-16 Hex Lock Nut /8-16X x 2-1/2 Screw /8-16 x 2 HHCS Screw 22 *** Hor. Slide Valve Assembly Valve/Lube Mounting Bracket /4-20 x 500 HWHST Screw /4 Hex Hd Self Tap Screw, Gr Lube Bottle (Red) Lube Applicator Shoulder Bolt Compression Spring Shoulder Bolt Vertical Slide Stop Lever Stop Lever Bracket Screw, 3/8-16 x 2.25 HHCS ** See Cylinder Assemblies pgs *** See Valve Assemblies pgs COATS Tire Changer 11
12 12 COATS Tire Changer Pressure & Inflation Bracket Assemblies
13 Inflation Bracket Assembly /4 N.F. Jam Nut Gr /8 N.F. Jam Nut Gr /4 Ext. Tooth Lock Washer /8 Ext. Tooth Lock Washer /4-20 Whiz Lock Nut, Gr Inflation Bracket Bushing (3/4 Valve) /4NPT ELL Fitting, 45D /4 Valve Ported 1/4-18 NPT /4NPT, 1/4HSE ELL Fitting Bushing (1/4 Valve) Male Elbow 1/4 NPT x 3/8 Tube /4 Valve Comp /4-20 x 1-3/4 H.H. Cap Scr., Gr Pressure Assembly, 60 PSI ** Pressure Assembly, 15 PSI /4 Hex Hd Self Tap Screw, Gr Tower Auxillary Side Cover /4-10 Gr.5 Nylon Insert Lock Nut Washer, 3/4 SAE Arm Stop Trim Strip, APX /4-10 x 7-1/2 HHCS, Gr Safety Valve Manifold/Gauge Protector Air Gauge Plastic Cap (Tower) Auxillary Tower Support Assembly Whiz Lock Nut, Gr Vertical Slide Plate /8 Whiz Lock Screw, Gr Universal Mounting Paste Lift Tool Tool/Lube Holder Pedal w/bar Assembly Inflation Pedal Channel Strainer Screen Fitting, Straight-3/ Vertical Slide Stop Block /4 Brass St. Fitting /4-20 x 500 HWHST Screw /8-16 x Whiz Bolt /8-16 Washer Head Hex Lock Nut ** Important: For models with Bead Sealing Only on the tire changer, use pressure limiter COATS Tire Changer 13
14 14 COATS Tire Changer Tilt Tower Assembly 1
15 Tilt Tower Assembly Tilt Tower Handle Retaining Ring Tilt Tower Valve Bushing /4 Nylinder Bearing Vertical Slide Valve Housing Assy _1 Compression Spring Miniature Valve Vertical Slide Valve Cam Left Vertical Valve Cover /4 Hex Hd Self Tap Screw, Gr M10 Nylon 6/6 Washer x 1/4 Long, SBHCS SHCS 10-24x2 Screw /8 NPT x 1/8 St. Male Fitting Central Flow Valve Retaining Ring Foam Handle Grip Ext Retaining Ring /16 x 5/16 Lg. Roll Pin /2-13 x 1-3/4, SHCS Gr Compression Spring Vertical Slide Lock Plate /2-13 Jam Nut Lift Cylinder Tube /2 Flat Washer /8 x 1 Cotter Pin Clevis Pin Lift Cylinder Pistion Seal Vertical Slide Shaft Lift Cylinder Shaft Vertical Slide Cap Button Hd. Soc. Screw /2-13 x 3 1/4 HHC Screw Hood Stop Molding /2-13 x 1 1/2 Set Screw Lock Cylinder Slide Cap Lock Cylinder Slide Seal /8PTC x 1/8PT Tee Fitting Lock Cylinder Slide Base /4-20 x.504 HHCS Pressure Spring, MDM/HGH /2-13 x 5 1/2 Screw SBHCS Screw Horizontal Slide Assembly Base Lift Cylinder Tube Lock Lift Cylinder Tube Rubber Bumper Mount Duckhead /8-16 x 1/2 SHSS Screw /8-16 x 1-3/4 Hex Hd Cap Screw /4-20 Whiz Lock Nut, Gr Mount/Demount Head / /4 HHCS Robo Roller Magnet Robo Roller Bracket Roller Spacer Roller Plain Washer /8-16 x 2.00 HHCS Screw O-Ring Seal /24 x 3/8 Cup Point Set Screw Nylon Insert Lock Nut Gr SHC Screw º Elbow 1/8 NPT x 1/8 Fitting x 3/16, SHCS /8 NPT x 1 Straight Fitting COATS Tire Changer 15
16 16 COATS Tire Changer Tilt Tower Assembly 2
17 Tilt Tower Assembly /4 Hex Hd Self Tap Screw, Gr /4 Flat Washer Rubber Tilt Tower Cover /2 x 2-1/4 Clevis Pin /4-10 UNC Lock Nut /8 x 3.5 Dowel Pin /8-16 x 1 1/4 Set Screw /8-16 Wash Hd. Lock Nut Gr /8-16 x 1-3/4 HWHCS Screw Horiz. Slide Roller Block Horiz. Slide Roller Shaft Tilt Tower Housing /2-13 x 1-3/4 SHCS, Gr /2 Flat Washer Compression Spring Lock Cylinder Slide Base Lock Cylinder Slide Seal Lock Cylinder Slide Cap Horiz. Slide Lock Plate /4-13 Jam Nut, Gr /8 x 1 Cotter Pin Clevis Pin /2-13 x 1 1/2 Set Screw º Elbow 1/8 NPT x 1/8 Fitting /4-20 x.504 HHCS /8 Push On Retaining Ring Formed Protector Tube /8 Hose Clamp /8 x 10 Black Rubber Hose /24 x 1 HHCS Screw Shuttle Valve Flow Control Valve Tilt Tower Pivot Hex Head Bolt Plastic Plug /8-11 Hex Whiz Lock Nut /8-11 SHSSCP Screw /8 x 1 Cotter Pin /4 SAE Washer COATS Tire Changer 17
18 Robo Arm Assembly Torque to 240 ft. / lb. Torque to 240 ft. / lb. Robo Arm Assembly Helper Arm Hold Down Foot ø1/4 x 1-1/2 Roll Pin ø1/2, Steel Ball Rubber Hand Grip, 1/ Ext. Retaining Ring, ø x 3/4 Lg. Screw SHCS 7 *** Robo Arm Valve Assembly Cylinder Assembly 2.5 Diameter /8 NPT x 1/8 St. Male Fitting /4 Hex Hd Self Tap Screw, Gr Neoprene Cushion Clamp /4-20 x 5/16 Soc Hd Set Screw Grease Fitting, St /4-10 Nylon Insert Lock Nut, Gr Flat Washer, 3/ Front Arm Weldment Rear Arm Weldment Swing Arm Pivot Pin /4-10 x 10-1/2 HHCS, Gr /8 Whiz Lock Screw, Gr /4 SAE Washer /16-18 Nylon Insert Lock Nut Gr Arm Stop Trim Strip, APX /16 x 1.00 Serrated Washer Hd Scr /4-10 x 7-1/2 HHCS, Gr Air Gauge Flange Mounting Plastic Fastener Manifold Bleed Valve Assembly Whiz Lock Nut, Gr /4 NPT x 1/8 NPT RDCR Fitting 18 COATS Tire Changer
19 Robo Roller Arm Assembly (If equipped) Aux Arm Small Roller HOUSING/BRACKET W/C /16-18 x 3/8 SHSS, Gr Rubber Hand Grip, 1/ Aux Roller Shaft Aux Arm Large Roller Ext Retaining Ring x 3/4 Lg. Screw SHCS 9 *** Aux Arm Valve Assembly /8 NPT x 1/8 St. Male Fitting Cyl. Assem. 2 Dia. x18 Stroke /4 Hex Hd Self Tap Screw, Gr Neoprene Cushion Clamp Grease Fitting, St Swing Arm Pivot Pin /4 ID Bumper Aux Arm Weldment /4-20 x 5/16 Soc Hd Set Screw Ext. Retaining Ring, ø ø1/2, Steel Ball /8-16 x 1/2 SHSS Screw /8-16 x 2-1/4 Hex Hd.Cap Scr, Gr Aux Arm Block Stop /4 NPT x 1/8 NPT RDCR Fitting COATS Tire Changer 19
20 Cylinder Assemblies * Note: Not the same one found on 7000 Series Rim Clamp 20 COATS Tire Changer
21 Cylinder Assemblies Cylinder Bottom Cap Cylinder Sleeve Male Elbow 1/8 NPT x 1/4 Hose Clamping Tie Bolt Axlry Cylinder Shaft B.L. Arm Cyl Assy (Pivot Pin, Old Style) B.L. Arm Cyl Assy (Rod End Style (Heim Joint) ELL 90º 1/4 Hose Fitting B.L. Cylinder Bottom Cap O-Ring Seal B.L. Cylinder Barrel /4-10 Nylon Insert Lock Nut, Gr B.L. Cylinder Lower Washer B.L. Cylinder Piston B.L. Cylinder Upper Washer O-ring Seal B.L. Cylinder Shaft (Pivot Pin, Old Style) B.L. Cylinder Shaft (Rod End Style (Heim Joint) Internal Retaining Ring x Plain Washer Rod Seal B.L. Cylinder Top Cap Wiper Seal Nylon Insert Lock Nut Gr Cylinder Assembly, Table Top Nut Hex Lock Shim Cap-Cylinder Top Cap-Cylinder Bottom, Cylinder Sleeve Piston Shaft-Piston Tie Bolt-Cylinder Seal-O-Ring Nut-Jam, M Washer-Plain, M Retaining Ring - Internal Tilt Tower Cylinder Assembly Seal-Scraper, Cylinder /4 Hose Fitting, 1/8 NPT w/orifice Bearing-Sleeve, Nyliner /16-18 Nylon Insert Lock Nut Gr Seal Kit, Table Top Cylinder Cylinder Base Cap Seal Kit, B.L. Cylinder Cylinder Sleeve /2-13 Locking Jam Nut, Gr Piston Washer Assembly Nylinder Sleeve Bearing Cylinder Rod Seal O-ring Seal Cylinder Top Cap º ELL, 1/8-27 NPT Fitting x x O-ring Seal Cylinder Tie Bolt Cylinder Shaft Horizontal Slide Cylinder Assembly St Fitting 1/8 NPT x 1/4 Hose COATS Tire Changer 21
22 Valve Assemblies Lift Valve Assembly /4 Hose Fitting, 1/8 NPT w/orifice /4 NPT x 1/8 NPT RDCR Fitting way Valve, Pedal Operated Muffler /4 Brass St. Fitting Tilt Tower Pedal Valve Assy /4 NPT x 1/8 Tube x 1/4 Barb Tee Fitting /4 Brass St. Fitting Valve, 4-Way w/pull Pin Muffler /4 x 90º Street Ell Nipple - Close, 1/4 NPT Check Valve /4 NPT, 1/4 HSE Ell Fitting BL Arm Valve Assembly Valve, 3 Position w/handle Muffler ELL 90º 1/4 Hose Fitting º Elbow Fitting, 1/4 x 1/4 Hose Robo Arm Valve Assembly /4 Brass St. Fitting Muffler Valve, 3 Position /4 NPT x 1/8 NPT RDCR Fitting º Elbow 1/8 NPT x 1/8 Fitting 22 COATS Tire Changer
23 Valve Assemblies Table Top Clamp Pedal Valve Assy mm Fitting Valve, 4-Way w/pull Pin Muffler /4 x 90º Street Ell Nipple - Close, 1/4 NPT Check Valve /4 NPT Male Run Tee Air Motor Pedal Valve Assy St. 1/4 NPT 3/8 Hose Fitting Valve, 4-Way w/pull Pin Muffler /4NPT, 1/4HSE ELL Fitting Hor. Slide Valve Assembly Muffler Valve, 3 Position /4 Brass St. Fitting Aux Arm Valve Assembly º Elbow 1/8 NPT x 1/8 Fitting /4 NPT x 1/8 NPT RDCR Fitting Valve-3POS Muffler /4 Brass St. Fitting COATS Tire Changer 23
24 24 COATS Tire Changer Pneumatic Diagram
25 Hose Reels Length Part No. Description 50-ft /4 ID x 1/2 OD Black Rubber Hose 50-ft /8 OD x Wall Plastic Tube 50-ft /8 ID x 11/16 OD Black Rubber Hose 25-ft ID x OD Red Rubber Hose 80-ft mm OD x 1mm Wall Plastic Hose Length Part No. Description 25-ft mm OD Vinyl Tube 25-ft mm OD x 5mm ID Plastic Tube 100-ft /8 OD x 1/4 ID Vinyl Tube 80-ft mm OD x 1mm Wall Plastic Tube 25-ft /2 ID x 3/4 OD Black Rubber Hose COATS Tire Changer 25
26 Electrical Schematics 115V MOTOR POWER SOURCE POWER CORD WHITE BLACK WHITE BLACK MOTOR CABLE MOTOR BLACK BROWN RED GREEN GREEN GREEN CIRCUIT BREAKER RED (SWITCH ASS'Y) GREEN (GROUND) GREEN (GROUND) V MOTOR POWER CORD GREEN WHITE WHITE MOTOR CABLE GREEN MOTOR BLACK BROWN RED GREEN POWER SOURCE BLACK BLACK GREEN CIRCUIT BREAKER RED (SWITCH ASS'Y) GREEN (GROUND) GREEN (GROUND) COATS Tire Changer
27 Notes COATS Tire Changer 27
28 Rim Clamp Tire Changer All-Air Unit Compressed Air Requirements COATS Rim Clamp tire changers that are powered entirely by air (no electric motor) require a single compressed air power source. Refer to the table below for exact specifications. Tire Changer Model Compressor Size Capable of APX 80 5 HP 4-15 SCFM at 150 PSI APX 90 5 HP 4-15 SCFM at 150 PSI Oiler and Water Separator Maintenance The oiler and water separator (on units so equipped) require weekly service. Oil and water levels (indicated on the level gauge on the side of each bowl) should be checked regularly. Add oil to the oiler if the fluid level is more than 1/4 from the top of the gauge. Remove the filler plug in the top of the oiler, and add SAE 10W non-detergent oil or an air tool oil to bring the level up to 1/4 from the top of the gauge. Replace the filler plug and clean up any spilled oil. Note: An alternate adjustment method for the oil flow is to turn the knob fully clockwise to stop the flow, then turn it back couterclockwise 1/4 turn. Oil Injector Maintenance The oil injector (on units so equipped) typically require annual service. The oil level in the oil reservoir tank should be checked regularly. Add oil to the oil reservoir tank if the fluid level in the tank is below a quarter full. Remove the cap from the oil reservoir tank and add Chevron Regal R & O 32 oil to the full line. Replace the cap and clean up any spilled oil. Important: If the hose between the reservoir and injector is ever empty of oil, an air lock will form. After filling the reservoir tank, the line must be bled of air at the injector connection as follows: a. Remove the side panel and locate the oil injector. b. Loosen the bleeder screw until oil drips from the screw. c. Retighten bleeder screw. d. Cycle the clamp valve a few times checking for oil and air leaks. e. Test the machine for full function before returning the machine to operation. Transmission Lubrication Check fluid level in the table top transmission once every 3 months. If fluid shows on dipstick, level is satisfac- tory. If no fluid shows on dipstick, add an SAE 80 gear lubricant until fluid shows on dipstick. Air Gauge Check and Recalibration 1. Inflate a standard 15 passenger car tire/wheel assembly to 32 PSI. Use a high quality stick-type pressure gauge to verify the pressure. Attach the tire changer s inflation hose to the valve stem and check the pressure reading on the air gauge. If it does not read 32 PSI, recalibrate the gauge. 2. Remove the screw-on lens. Loosen the 2 screws on the face of the gauge. Loosen them just enough so that the gauge face moves. Do not remove the screws. 3. Rotate the gauge face until the 32 PSI mark is aligned with the gauge needle. Tighten the 2 screws and replace the lens. Danger, Warning, Caution, and Instructional Decals Always make the cleaning of these important decals a part of your regular maintenance routine. If they are dam- aged or illegible, replace them immediately. Your safety, and the safety of others is involved! Regal is a trademark of Chevron Products Company /2018 Copyright 2011 Hennessy Industries and COATS All Rights Reserved. Printed in USA
APX80A/APX80E APX90A/APX90E
APX80A/APX80E APX90A/APX90E Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies *APX90 Shown Parts Identification READ these instructions before placing
More informationRC-45 A/E, RC-55 A/E Rim Clamp Tire Changers
RC-45 A/E, RC-55 A/E Rim Clamp Tire Changers For servicing single piece automotive and most light truck tire/wheel assemblies. Model RC-45 Model RC-55 Parts Identification READ these instructions before
More informationRC-45 A/E, RC-55 A/E Rim Clamp Tire Changers
RC-45 A/E, RC-55 A/E Rim Clamp Tire Changers For servicing single piece automotive and most light truck tire/wheel assemblies. Model RC-45 Model RC-55 Parts Identification READ these instructions before
More informationGTS50, GTS60, and GTS70 Rim Clamp Tire Changers
GTS50, GTS60, and GTS70 Rim Clamp Tire Changers For servicing single piece automotive and most tubeless light truck tire/wheel assemblies. Any other type, including tube type and agricultural, require
More informationFor servicing single piece automotive and most light truck tire/wheel assemblies
7065 AX/EX Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these
More information7060 AX/EX. Rim Clamp Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
7060 AX/EX Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies READ these instructions before placing unit in service KEEP these and other materials
More informationGTS50/60/70 and GTS90 Rim Clamp Tire Changers
GTS50/60/70 and GTS90 Rim Clamp Tire Changers For servicing single piece automotive and most tubeless light truck tire/wheel assemblies. Any other type, including tube type and agricultural, require special
More information50/60/70 and X-Model Series Rim Clamp Tire Changers
50/60/70 and X-Model Series Rim Clamp Tire Changers For servicing single piece automotive and most tubeless light truck tire/wheel assemblies. Any other type, including tube type and agricultrual, require
More informationRC-200EX / RC-150EX Rim Clamp Tire Changer
RC-200EX / RC-150EX Rim Clamp Tire Changer For servicing motorcycle and ATV tire/wheel assemblies as well as automotive and most light truck tire/wheel assemblies (holds 6 to 8-inch wheels for manual tire
More information7050/7060/ AX/EX Tire Changer
00/00/0 AX/EX Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Wilkes-Barre, PA 0 0--0 00--0 Parts Identification READ these instructions before placing unit
More information5035 A/E. Rim Clamp Tire Changer. Parts Identification
5035 A/E Rim Clamp Tire Changer Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease
More informationFor servicing single piece automotive and most light truck tire/wheel assemblies
6065 A/E/AX/EX Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies READ these instructions before placing unit in service KEEP these and other materials delivered
More information5050 A/E. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
5050 A/E Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other materials
More information5035 A/E. Rim Clamp Tire Changer. Parts Identification
5035 A/E Rim Clamp Tire Changer Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease
More informationRC-100. Rim Clamp Tire Changer. Parts Identification
RC-100 Rim Clamp Tire Changer For servicing motorcycle and ATV tire/wheel assemblies, also single piece automotive and most light truck tire/wheel assemblies s Identification READ these instructions before
More informationFor servicing single piece automotive and most light truck tire/wheel assemblies
5065 A/E/AX/EX Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other
More informationTire Changer For servicing single piece automotive and most light truck tire/wheel assemblies
5060 A/E/AX/EX Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other
More informationRC-100. Parts Identification
RC-100 Rim Clamp Tire Changer For servicing motorcycle and ATV tire/wheel assemblies, also single piece automotive and most light truck tire/wheel assemblies s Identification READ these instructions before
More informationBASELINE. Rim Clamp Tire Changers. Parts Identi cation. For servicing single piece automotive and most light truck tire/wheel assemblies.
BASELNE Rim Clamp Tire Changers For servicing single piece automotive and most light truck tire/wheel assemblies. Model 300 Shown Model 500 Shown Parts denti cation READ these instructions before placing
More information9010 A/E. Rim Clamp Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
9010 A/E Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies s Identification READ these instructions before placing unit in service KEEP these and other
More informationRobo-Arm Kit
Robo-Arm Kit 85009937 For use with COATS Model Series Tire Changers This is a supplement to your operating manual and covers the installation of the Robo-Arm. If you do not have your original operating
More informationAPX80A/APX80E APX90A/APX90E Rim Clamp Tire Changer
APX0A/APX0E APX0A/APX0E Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies * APX 0 Shown Parts Identification READ these instructions before placing
More informationH.I.T Truck Tire Changer. Parts Identification
H.I.T. 6000 Truck Tire Changer Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of
More informationH.I.T Truck Tire Changer. Parts Identification
H.I.T. 6000 Truck Tire Changer READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors
More informationRobo-Assist Accessory
Robo-Assist Accessory Kit 85607617 For use with BaseLine by COATS Tire Changers This is a supplement to your operating manual and covers the installation and use of the Robo-Assist accessory. If you do
More informationModel 4070 Center Post Tire Changer
Model 4070 Center Post Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies. Parts Identification READ these instructions before placing unit in service. KEEP these
More informationRide Management System
XR 1800 Ride Management System Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of
More information4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
4050A Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other materials
More informationH.I.T Truck Tire Changer
u H..T. 6000 Truck Tire Changer READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors
More informationALL AIR RC-15A2 RC-15A2 SPECIAL INSTRUCTIONS
ALL AIR RC-15A2 RC-15A2 SPECIAL INSTRUCTIONS The RC-15A2 uses only one power source. Compressed air at 110 to 175 PSI should be supplied to the air inlet hose at the rear of the machine. (Recommended compressor
More informationH.I.T. 5000H2 TRUCK TIRE CHANGER. Parts Identification
TRUCK TIRE CHANGER Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
More informationModels 1100, D Wheel Balancers
Models 10, 1150-2D Wheel Balancers Model 1150-2D Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near
More informationWheel Balancer Models D, D, D & D
Wheel Balancer Models 1300 2D, 1400 2D, 1500 3D & 1600 3D Model 1300 Model 1400 Model 1500 Model 1600 Parts Identification READ these instructions before placing unit in service. KEEP these and other materials
More informationHeavy Duty Wheel Balancers
6450 2D/3D Heavy Duty Wheel Balancers Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More information1250 2D/3D/3DV D/3DV
120 2D/3D/3DV 12 3D/3DV Wheel Balancers Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More information1250 2D/3D/3DV D/3DV
0 2D/3D/3DV 3D/3DV Wheel Balancers Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease
More informationInteractive Balancing System
IBS 2000 Interactive Balancing System Parts Identification Manual Part No.: 9112388 HENNESSY INDUSTRIES INC. Manufacturer of AMMCO, COATS and BADA Automotive Service Equipment and Tools. Revision: 12/00
More informationParts Manual SERIES CVT Lawn Tractor. Model LT1040 CUB CADET LLC, P.O. BOX CLEVELAND, OHIO PRINTED IN U.S.A.
Parts Manual CVT Lawn Tractor SERIES 000 Model LT00 PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX CLEVELAND, OHIO -00 FORM -00C.fm (//00) SERIES 000 CVT LAWN TRACTORS TABLE OF CONTENTS DESCRIPTION PAGE Axle,
More informationModels 820 and 840 2
Models 820 and 840 2 Models 820 and 840 1 783-0250 Hood 2 738-0952 Shld. Bolt.375" Dia. x.5" 3 736-0175 Spr. Washer.265" I.D. x.562" OD 4 710-0751 Hex Bolt 1/4-20 x.62" * 6 7-0271 Hex Sems Nut 1/4-20 Thd.
More information1 MTD Dash Panel Support Brkt. 2 MTD Dash Panel 3 MTD Hex Bolt 5/16-18 x.75" Lg.* 4 MTD Bulb 5 MTD Hex AB-Tap
1 MTD 16655 Dash Panel Support Brkt. 2 MTD 16656 Dash Panel 3 MTD 710-0118 Hex Bolt 5/16-18 x.75" Lg.* 4 MTD 725-0963 Bulb 5 MTD 710-0776 Hex AB-Tap Scr. 1/4 x.62" 6 MTD 725-1058 Socket 7 MTD 712-0267
More information136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck
136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously
More informationLAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL
More informationLAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationON-THE-VEHICLE BRAKE LATHE
800 ON-THE-VEHICLE BRAKE LATHE Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease
More informationPart s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)
Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationMODELS: (4800), (4300) (4300 AXP), (4800 AXP)
PARTS LIST Advance MODELS: 56303000 (4800), 56303001 (4300) 56303591 (4300 AXP), 56303592 (4800 AXP) 3/04 revised 3/11 04-3 08-11 TABLE OF CONTENTS DESCRIPTION PAGE Chassis System... 2-3 Chassis System
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More information8 PARTS MANUAL 8.1 LIFT ASSEMBLY
8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-0767 2 2 CARRIAGE WELDMENT 4-0778 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE
More informationMID RISE. INSTALLATION and OPERATION MANUAL MODEL 6000A // 6000E 6,000 LB. CAPACITY. READ and SAVE THIS INSTRUCTION MANUAL
INSTALLATION and OPERATION MANUAL MID RISE MODEL 6000A // 6000E 6,000 LB. CAPACITY READ and SAVE THIS INSTRUCTION MANUAL AUGUST 2005 6-0944 6500 Millcreek Drive Mississauga, Ontario Canada L5N 2W6 1-800-268-7959
More information8 PARTS MANUAL 8.1 LIFT ASSEMBLY
8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-1010 2 2 CARRIAGE WELDMENT 4-1114 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationStand-On Spreader Sprayer
Illustrated Parts Manual Stand-On Spreader Sprayer CUB CADET LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (March, 00) To The Owner Thank You Thank you for purchasing a Cub Cadet Commercial
More information8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST
8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST 24 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY. DESCRIPTION PART # 1 24 FLAT WASHER, 1/2 ID SAE 6-0248 2 16 LOCKWASHER, 1/2 ID 6-0059 3 17 HEX NUT, 1/2-13UNC 6-0035
More informationPart s Catalog. LX420 & LX460 Lawn Tractors. Model No. 13AX60RG744 Model No. 13AX60RH744
Part s Catalog For Parts Call 0-- or 0-- LX0 & LX0 Lawn Tractors Model No. AX0RG Model No. AX0RH Original Instructions (EN) -0 (0//0) Models X0RG & X0RH --00 Turf Tire, 0 x.0 x -000-00 Rim,.0 x.0-0-0 Wheel
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationINSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL 12K 2 POST S212SX 1-1-R/B/M (SYMMETRICAL) READ THIS INSTRUCTION MANUAL THOROUGHLY BEFORE INSTALLING, OPERATING, SERVICING OR MAINTAINING THE LIFT. SAVE THIS MANUAL. OCT
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationParts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
More informationHYDROBURST HB3038, HB5058, HB80, HB125
TM HYDROBURST HB3038, HB5058, HB80, HB125 Parts Manual HYDROBURST HB3038, HB5058, HB80 & HB125 s/n Part No. PM1251 INTRODUCTION HOW TO USE THE MANUAL This manual contains illustrations and parts list of
More informationEnglish. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual MZ5225 / 99991 MZ125 / 99991 MZ22 / 999919 MZ5225BF / 999920 MZ125BF / 999921 MZ5225C / 99994 MZ125C / 999949 MZ25 / 99990 Please read the operator s manual carefully and make sure you understand
More information4 - Husqvarna CHASSIS / FRAME
- Husqvarna CHASSIS / FRAME 0 0 CHASSIS / FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION..... GUARD, REAR..... SUPPORT, TOP..... RHSSNB ¼- x ½.. 0... RIVET, / STAVEX.. 0... NUT ¼-
More informationParts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE1250KW SPE140KW SPE150KH SPE151KW SPEL150KH
Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE10KW SPE0KW SPE10KH SPE11KW SPEL10KH MOWER UNIT MODEL SPE30 SPE480 SPE31 SPE481 IT IS POLICY OF SNAPPER TO
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationMODEL 5500 Tire Repair Station
MODEL 5500 Tire Repair Station Installation, Operation and Repair Parts Information Branick Industries, Inc. 4245 Main Ave P.O. Box 1937 Fargo, North Dakota 58103 P/N: 81-0047C TABLE OF CONTENTS SAFETY
More informationYARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4
Parts Manual for HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 MODEL HZS15423KVE HZS18483BVE YZ16424BVE YZ20484BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationTWIN ROTARY RAKE PARTS BOOK MODEL
TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationParts Manual MZ5225 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225 / 966690502 Please
More informationLAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
More informationParts Manual M-ZT52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual M-ZT52 / 961001 Please
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationRITE WAY MFG. CO. LTD. P.O.
CO. LTD. P.O. Box 328 Imperial, Saskatchewan Canada, S0G 2J0 Ph: (306) 963-280 Fax: (306) 963-2660 Web Site: www.ritewaymfg.com E-mail: info@ritewaymfg.com Table of Contents SPECIFICATIONS... WARNING...2
More informationHydrostatic Garden Tractor Model GT1554
Illustrated Parts Manual Hydrostatic Garden Tractor Model GT CUB CADET LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (March, 00) SERIES GT HYDROSTATIC GARDEN TRACTOR TABLE OF CONTENTS DESCRIPTION
More informationLAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationParts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationMODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP
MODEL NO. -900 & UP MODEL NO. 00-900 & UP MODEL NO. 0-900 & UP MODEL NO. 0-900 & UP SKID SPRAYER FORM NO. 99-055 REV. B SET-UP AND PARTS LIST Refer to the illustrated Parts List for the details of parts
More informationM-ZT 61. Parts Manual. Zero Turn Mower /
Parts Manual M-ZT 61 Zero Turn Mower / 967177008-01 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationZ4822/ Z4824/
Parts manual Z4822/968999301 Z4824/968999303 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2005 Husqvarna. All Rights Reserved.
More informationReproduction. Not for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES. Parts Manual for RE210
Parts Manual for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES Model No. Description 7800952-00 RE210 Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, 30253 U.S.A. 800-935-2967
More informationModel Series 660 & 670
Model Series 0 & 0 Part. -0A Harness Assembly. -0 Hex TT-Tap Scr. /-0 x. Lg.. -0 Hex Bolt /-0 x. Lg.. -00 Hex Bolt /- x. Lg.. -0 Speed Nut /-0 Thd.. -00A Flange L-Nut /- Thd.. -00 Hex Nut /-0 Thd.. -0
More informationBLACK BEAR ZTR. Parts Manual. English
BLACK BEAR ZTR Parts Manual KOHLER / 9999 KAWASAKI / 99999 KOHLER / 9999 KOHLER / 9999 KAWASAKI / 9999 KAWASAKI / 999990 KAWASAKI / 99997 Please read the operator s manual carefully and make sure you understand
More informationPIÈCES DÉTACHÉES ELT125D33 1KV. Tondeuse autoportée
PIÈCES DÉTACHÉES Tondeuse autoportée ELT15D33 1KV Yvan Béal - 1, av. de l Agriculture - B.P. 16 Z.I. du Brézet - 63014 Clermont-Ferrand Cedex Tél : 04 73 91 93 51 - Télécopie : 04 73 90 3 11 www.yvanbeal.fr
More informationForm 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
More informationFaceClipper Model # Serial #
FaceClipper 000 Model # Serial # Vertex Fasteners A Subsidiary of Leggett & Platt, Inc. 798 Sherwin Avenue Des Plaines, Illinois 6008 U.S.A. (87) 768-69 REV. O Table of Contents OF EQUIPMENT... OPERATION
More informationParts List for Sentar (For Serial Numbers Prior to 19729)
Parts List for Sentar (For Serial Numbers Prior to 19729) Replace with newer revisions as they become available 2006 Wright Manufacturing, Inc. All rights reserved Updated 08/2006 52", 61" CUTTER DECKS
More informationS/N 126, ,087 Page 1 of 74 Air Cleaner
1420 S/N 126,001-147,087 Page 1 of 74 Air Cleaner 1420 S/N 126,001-147,087 Page 2 of 74 Air Cleaner 1 KH-X-276-7 1 S Nut, Wing 2 KH-45-082-01 1 /P Cover, Air Cleaner 3 KH-231032 1 /P Seal, Element Cover
More informationParts Manual. Models Mfg. No. Description Brute, 14.5TP 29" Dual Stage Snowthrower (2012)
Parts Manual Models Mfg. No. Description 1696282-00 Brute, 14.5TP 29" Dual Stage Snowthrower (2012) Manual Part No. 1756728 Revision C Rev. Date: 8/21/2013 Table Of Contents PRODUCT COMPONENTS PAGES Handles
More informationRZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0
Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,
More informationZ-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler
Z-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler Z-Force 60 KW 53AA5DBJ Page 2 of 57 Air Filter & Muffler Ref # Part Number Qty S/P/F Description 11011 KM-11011-7003 1 S CASE-AIR FILTER 11013 KM-11013-7009
More informationTECHNICAL DATA BROCHURE ZTR 308/3II
Date 8/84 Page 1 of 6 TECHNICAL DATA BROCHURE ZTR 308/3II IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS. ' Seat Adjustment Loosen bolts on sliding brackets under each side of
More informationPARTS CATALOG ODYSSEY INCLUDES MOWER
PARTS CATALOG 8-3350 ODYSSEY INCLUDES MOWER INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (P.I.N.) OR SERIAL NUMBERS (S/N) ENGINE MODEL, SERIAL AND SPECIFICATION NUMBERS TRACTOR MODEL
More information