HBT SERIES HYDROSTATIC BURST TESTER FEATURES: PUMP TYPE PRESSURE RANGES HYDROSTATIC PRESSURE GAUGE
|
|
|
- Randolph Stone
- 5 years ago
- Views:
Transcription
1 HBT SERIES HYDROSTATIC BURST TESTER MODELMODEL HBT ( STANDARD MODEL) SHOWN IN PHOTO FEATURES: BENCH MOUNT: Powder coated cabinet with removable back, base plate for bench mounting. PANEL MOUNTED: Gauges, valves, regulator for easy controls. RESERVOIR BUILT IN: inside the test chamber to collect water/test media when testing is completed. Heavy duty chamber with 1/2 thick UHMW sheets inside the test chamber to absorb impact of components when they rupture. 1/2 thick Lexan viewing window for operator safety during testing. Optional tank sizes available. Consult factory PUMP TYPE PRESSURE RANGES HYDROSTATIC PRESSURE GAUGE AIR CONTROL SYSTEM TEST CHAMBER Air-driven piston pump, 0-1,000, 0-0-3,000, , 0-10K, 0-120K & 0-30K 6 dial gauges, all stainless steel, glycerin filled 0.5% accuracy, full scale. Calibration certs optional. 3/8 50-micron filter, pump regulator and lubricator Stainless steel tank, 28 L x 18 W x 15 H with test tray inside, Lexan lid with stainless steel frame and latch. TEST PORTS 1/4 FNPT up to 10,000 psi, 1/4 High Pressure (9/16-18) for 20 & 30 K. DIMENSIONS & WEIGHT 46 L x 18 W x 25 H approx. 175 lbs.
2 VENT PORT TEST PORT TEST PORTS INSIDE HBT TESTER: HIGH PRESSURE PORTS ON LEFT PICTURE, STD. NPT PORTS ON RIGHT PHOTO REAR VIEW OF HBT MODEL SHOWING COMPONENTS
3 PUMP REGULATOR HYDROSTATIC TEST GAUGE TEST CHAMBER WITH RESERVOIR SUPPLY CUTOUT VALVE (10K ) PRESSURE DRAIN VALVE VENT VALVE VENT SIGHT FLOW PUMP FLOW CHARTS (CU.IN/MIN.)* RATIO PRESSURE RANGE FREE @ K 10: : : : :1 10K :1 15K :1 20K * BASED ON 100 SHOP AIR,15 SCFM FLOW(MINI PUMP SERIES)
4 ACCESSORIES HOSE ASSEMBLIES 3V05-120: 10 FT. HOSE ASSY, 5000 WITH QUICK DISCONNECTON ONE END, MPT ON OTHER END. 3V10-120: 10 FT. HOSE ASSY. 10,000 WITH QUICK DISCONNECT X MPT. 3V FT. HOSE ASSY. 1/4 HP TUBE, CONED & THREADED WITH NUT ON EACH END, 30,000. QUICK DISCONNECTS PLUG MP-F04: MALE PLUG, 1/4 FPT, PLATED STEEL MP-F06: MALE PLUG, 3/8 FPT, PLATED STEEL FS-F04: FEMALE SOCKET, 1/4 FPT PLATED STEEL FS-F06: FEMALE SOCKET, 3/8 FPT PLATED STEEL SOCKET RELIEF VALVES RV5-A : 1/4 MPT ANGLE SS RV RV5-B: 1/4 MPT ANGLE SS RV RV5-C: 1/4 MPT ANGLE SS RV RV5-D: 1/4 MPT ANGLE SS RV RV5-E:1/4 MPT ANGLE SS RV RV5-F: 1/4 MPT ANGLE SS RV RV5-G: 1/4 MPT ANGLE SS RV RV5-H: 1/4 MPT ANGLE SS RV RV005-1: 1/4 FPT STRAIGHT RV ,000
5 PRESSURE GAUGES TGM-1: 4 DIAL ALL SS, GF, 1/4 LM TGM-2: 4 DIAL ALL SS, GF, 1/4 LM TGM-3: 4 DIAL ALL SS, GF, 1/4 LM TGM-5: 4 DIAL ALL SS, GF, 1./4 LM TGM-6: 4 DIAL ALL SS, GF, 1/4 LM TGM-10: 4 DIAL ALL SS, GF, 1/4 LM 0-10,000 TGM-15: 4 DIAL ALL SS GF, 1/4 HP 0-15,000 TGM-20: 4 DIAL ALL SS, GF,1/4 HP 0-20,000 TGM-30: 4 DIAL ALL SS, GF, 1/4 HP 0-30,000 TO ORDER PANEL MOUNTED GAUGES ADD PM TO THE END OF THE PART NUM- BER: EXAMPLE: TGM-1-PM : 4 DIAL, ALL SS, GF, PANEL MOUNTED PRESSURE CHART RECORDERS PR-8: 8 DIAL CHARTS, BATTERY DRIVE, ADJUSTABLE SPEED AVAILABLE IN THESE PRESSURE RANGES: , , 0-5,000,0-10,000 (1/4 NPT PORTS) 0-15K, 0-20K & 0-30K ( 1/4 HOGH PRESSURE PORTS) ALSO AVAILABLE IN DUAL PRESSURE CONFIGURA- TION WITH DUAL PENS. PRESSURE RECORDER CHARTS & PENS CHARTS: SOLD IN BOX QUANTITIES, 25 PER BOX. SPECIFY PRESSURE RANGE REQUIRED. PENS: AVAILABLE IN BLUE OR RED, 5 PER BOX. HIGH PRESSURE ADAPTERS HPM-4M: HIGH PRESSURE MALE X 1/4 MPT, 10,000 RATED. HPM-4F: HIGH PRESSURE MALE X 1/4 FPT, 10,000 RATED.
6 AIR DRIVEN PUMPS S216J10: 0-1,000 REPAIR KIT# S216J20: 0-2,000 REPAIR KIT# S216J30: 0-3,000 REPAIR KIT# S216J35: 0-4,500 REPAIR KIT# S216J60: 0-6,000 REPAIR KIT # S216J100: 0-8,800 REPAIR KIT# S216JN101:0-10,000 REPAIR KIT # S216JB150:0-15,000 REPAIR KIT# S216JB200 :0-20,000 REPAIR KIT# S216JB300:0-30,000 REPAIR KIT # NC-025 : 1/4 NPT INLET & OUT LET 4.3 GPM FLOW, MAXIMUM PRESSURE 100 PB-05 : 1/2 NPT INLET & OUT- LET 17 GPM FLOW, MAXIMUM PRESSURE 100 NEEDLE VALVES 402-FFS-HL2: 1/4 NPT, STAINLESS STEEL, 10, FFS-PLM: 1/4 NPT, STAINLESS STEEL 10,000, PANEL MOUNT
P200 SERIES PORTABLE HYDROSTATIC TESTER FEATURES: PUMP TYPE AND PRESSURE RANGES
P200 SERIES PORTABLE HYDROSTATIC TESTER MODELMODEL P200-SM ( STANDARD MODEL) SHOWN IN PHOTO HEAVY DUTY ROLL FRAME: Powder coated square tubular frame for easy transport. DUAL GAUGE MANIFOLD: 4 dial gauges
HYDROSTATIC TEST SYSTEM MANUAL
PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume
BIO-LAB BROMINATOR Models CB 8-14 thru CB 8-45
PAGE 1057 LINE REFERENCE PRODUCT DESCRIPTION - BIO-LAB BROMINATOR BIO-LAB BROMINATOR Models CB 8-14 thru CB 8-45 ITEM NO. DESCRIPTION SUGG. LIST 01W0002071 25470000 Plastic Air Vent - B34A $ 5.42 02W0006053
EZ-View. Flow Meters ISO CERTIFIED 9001
EZ-View ISO CERTIFIED 9001 General Design Features OPERATING PRINCIPLE The EZ-View Flow Meter is a variable-area instrument. A precisionmolded, sharp-edged Orifice, located within the Piston Assembly,
EZ-View Flow Meters. With Flow-Alert TM Flow Switch REDUCE MAINTENANCE COSTS TEL
With Flow-Alert TM Flow Switch Reed switch and latching models Automatically signals alarm if flow is too high or too low Models available for AC or DC power supply Latching models include Hirschmann type
Pressure Instrument Testing Equipment
Pressure Instrument Testing Equipment BULLETIN TE-1 A Halliburton Company A Durable, Portable Primary Standard Model 1305D Deadweight Tester The Ashcroft 1305D Deadweight Tester is an affordable, portable
STA RITE SYSTEM 2 MOD MEDIA & MOD D.E.
STA RITE SYSTEM MOD MEDIA & MOD D.E. PLM 100, 15, 150, 175, 00, 00 MODULAR MEDIA & ABG SYSTEMS MODELS PLD50, 70 - MODULAR DE & ABG SYSTEM D-15 Edited 10-5-11 FREE STANDING 1 ABG SYSTEMS A 10 15 16 A 1
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
Low Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
SST Series Sand Media Filtration Systems
SST Series Sand Media Filtration Systems Kits and Spare Parts Listing LS-695 (Rev. 6 / 07) Page 1 SST SAND FILTERS Installation Profile Automatic Systems WLS-594B(REV.11/03) Installation Configurations
Power Units. Leading provider of bolt loading & removal solutions
Power Units More speed, power and durability Versatile units, power a wide variety of wrenches and tools Every unit tested by FASTORQ technicians Every unit complete with hoses, controllers, quick disconnects
INSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Accessories Index. Air Starters. Accessories Index By Description Accessory IR Page Description Part # Number J 1 SRV125 SRV125T SRV100
Air Starters Accessories Index Accessories Index By Description Accessory IR Page Description Part # Number Relay Valves SRV100 SRV125 SRV125T SRV150 SRV150SS Relay Valve Tune Up Kit SRV150-TK3 J-3 J-4
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
Features. HTHP Filter Press for Drilling Fluid Testing DRILLING FLUIDS EQUIPMENT
HTHP Filter Press for Drilling Fluid Testing DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion
HYDRAULIC PUMPS. Performance under Pressure
HYDRAULIC PUMPS LARZEP Pumps are available in a wide range of models: Hand pumps, Air hydraulic pumps, Modular pumps, Manual, Electric, Air and Petrol hydraulic powerpacks, Split-Flow powerpacks, Hydrotest
Atomizer 36-DC User Guide
TECHNICAL INSTRUCTIONS Atomizer 36-DC User Guide SERVICE CASE HUMIDIFICATION Specification Sheet... 2 Installation Guide... 3 Layout Diagram... 4 Maintenance Guide... 5 Wiring Diagram... 6 Pull Sheet...
The full WeatherTRAK Flow3 Installation and Maintenance Manual is available online at
Installation Manual INTRODUCTION The full WeatherTRAK Flow Installation and Maintenance Manual is available online at www.weathertrak.com General Description A WeatherTRAK Flow combines a hydraulic master
EZ-View Flow Meters. General Design Features OPERATING PRINCIPLE
General Design Features 9 8 5 6 7 4 3 2 1 10 OPERATING PRINCIPLE The EZ-View Flow Meter is a variable area instrument. A precisionmolded, sharp-edged Orifice 1, located within the Piston Assembly, 2 forms
AGD AND AGD4A SERIES
Job Name: Job Location: Engineer: Tag: AGD AND AGD4A SERIES DESCRIPTION The Apollo Air Gap Drain (AGD) is designed to funnel minor discharges from a Reduced Pressure Backflow Preventer s relief valve due
2017 Parts Catalog. Pricing Effective Hayward CL110 & CL110ABG Feeder
Hayward Chlorinators Hayward CL110 & CL110ABG Feeder W000013.70 CLX110C 1 Cover $27.40 W000017.00 CLX110K 2 O-Ring Viton $34.00 W000015.20 CLX110DA 3 Dial Control Valve Assembly $30.40 NLA CLX110B 4 Mounting
Accessories. Section Outline
Fisher Controls offers a line of accessories including filters, needle valves, pressure gauges, vent assemblies, and emergency shutoff valves. This section provides technical information for these accessories.
HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
MicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves
MicroCoat System Operating Manual MC Series MC785M, MC785M-WF Spray Valves A NORDSON COMPANY Introduction The MicroCoat System provides precise lubrication control for metal stamping operations. The MC
SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
INSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
1501 Industrial Way N., Toms River, NJ Fax: PACKING LIST INSTALLATION INSTRUCTIONS
1/6/04 1501 Industrial Way N., Toms River, NJ 08755 732-349-2109 Fax:732-244-0867 MODERATE - Installation requires metric tools and possibly cutting and drilling. The ability to closely follow instructions
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
PRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing
PRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing TABLE OF CONTENTS Assembling Components...page 8" Tanks & Tank Kits... " & " Dia. Tank & Tank Kits... Manifold Kits 6", 8" & 0"... 5-5
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
SANITIZER PARTS SANITIZER PARTS
SANITIZER PARTS 579 AUTOMATIC FEEDER - MODEL 300, 302, 300-19, 300-29 R171026 R171016 Model No.: 300 302 Description: AUTOMATIC FEEDER SPA HOT TUB FEEDER 1 1 R172008W 3 in. threaded cap, white 2 1 R172009
Complete Systems & Parts Automatic Oiler & Grease Bank MADE IN THE USA
Complete Systems & Parts Automatic Oiler & Grease Bank MADE IN THE USA Lubrication Systems contents Lube Minder Automatic Oiler Why Lube Minder?..4 Lube Minder Parts and Pictures....6-7 Understanding the
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
User Manual for Models: GK5T Central Doorway Foam Station 02202 Specifications: Tip Assembly...GK7T (Sold Seperately) Foam output...30 gallons/minute (2 liters/minute) Acceptable Products: Quat Sanitizers
HIGH PRESSURE SPRAY GUNS &ACCESSORIES
HIGH PRESSURE SPRAY GUNS &ACCESSORIES Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Built in hose swivel Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Max. PSI: 4000
Nordson Airless Nozzle Tester
Instruction Sheet P/N Nordson Airless Nozzle Tester. Introduction The Nordson airless nozzle tester is used to test the flow rate of flanged airless nozzles. The results of the tests can be used to determine
J Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
Fluid Cooling Mobile AOHM / AOVHM Series
Fluid Cooling Mobile Series 0916 Performance Notes AO/AOVH Series with hydraulic motor Adjustable louvers (manual) High heat removal Heavy duty construction Wide flow range Heat removal up to 210,000 BTU/HR
CHAPTER 4 PARTS AND DIAGRAMS
CHAPTER 4 PARTS AND DIAGRAMS FRONT VIEW 2 1 3 6 5 4 ITEM DESCRIPTION PART NUMBER ITEM DESCRIPTION PART NUMBER 1 Gauge, Vacuum Asmb. MV2008010 5 Drawer, Plastic MV0105002 1a Lens, Vacuum Gauge MV0501910
TRAILER SERVICE MANUAL
TRAILER SERVICE MANUAL TRS-2500 89190-1 To locate your local Kärcher Shark Commercial Pressure Washer Dealer nearest you, visit www.karchercommercial.com or www.karchershark.com 8.91-9.0 CONTENTS CONTENTS
Marsh Gauge Selection Made easy! 6-10 Filters Regulators Lubricators General Service Gauges Severe Service Gauges
INDEX What s New 2-5 Quick Selector Marsh Selection Made easy! 6-0 Filters Regulators Lubricators Miniature (M) & Standard (M2) FRL s, Filters, Regulators, Filter-Regulators, Lubricators (6) -5 General
GENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
GENERAL PURPOSE PANEL MOUNT GENERAL PURPOSE IN-LINE
GENERAL PURPOSE PANEL MOUNT SERIES RMA RMB RMC VFA VFB VFC/VFCR 0.05 to 200 SCFH air (5 to 2500 cc/m air) 0.5 to 600 SCFH air (0.6 to 95 LPM air) 5 to 1800 SCFH air (2.5 to 850 LPM air) 0.1 to 200 SCFH
INSTALLATION MANUAL APPLICATION: T 125G 45psi) CLASS 1-CLASS 8 *Requires a Fuel Line Kit*
INSTALLATION MANUAL APPLICATION: T 125G (125GPH @ 45psi) CLASS 1-CLASS 8 *Requires a Fuel Line Kit* WARNINGs! WARNING: Do not tie FASS Return in with engine return. Back pressure can cause damage to engine.
OPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit
OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-250.0 DE-201007D HD 1.9/15 Ed 1.575-251.0 DE-201507D HD 2.8/10 Ed 1.575-252.0 DE-301007D HD 3.5/20 Ea 1.575-253.0 DE-352007A To locate your local
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 Gas Convection Steamers C24GA6 ML-136056 C24GA10 ML-136057 C24GA6 ML-136021 C24GA10 ML-136022 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH
Guide Specification SECTION HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 21 16 - HYDRONIC PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Air
Section 12. Contain-It Secondary Containment Piping System. Serviced by GF Little Rock
Section 12 Contain-It Secondary Containment Piping System Serviced by GF Little Rock Table of Contents Contain-It Pipe 12.4 Fittings 12.5 Terminations 12.7 Centralizers 12.8 Accessories 12.9 Adhesive Requirements
REQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL. 411 718 38 3 1027 1 127 127 127A 1080 1081 1028 127 718A 127 718 44B 718A 2 44A 493 44 1069 112 718B 1019 LABEL KIT 1058 OWNER S MANUAL
IsoTherm FlowGuards Mini Ball Valves Gauges Aquastats Unions
82 IsoTherm FlowGuards Mini Ball Valves Gauges Aquastats Unions 83 Adjustment knob (sets supply temperature) Mixing Valve 1 Male BSP Threads Mixing Point Supply Inlet from Boiler Temperature Gauge (indicates
Hayward CL110 & CL110ABG Feeder
Hayward Chlorinators Hayward CL110 & CL110ABG Feeder W000013.10 l CLX110C 1 Cover $26.20 W000016.40 CLX110K 2 O-Ring Viton $32.80 W000014.60 l CLX110DA 3 Dial Control Valve Assembly $29.20 NLA CLX110B
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
Catalog Little Champ Hydraulic Power Units
Catalog Little Champ Hydraulic Power Units 3 AND 5 Gallon Capacity General Specifications/Table of Contents Little Champ Power Units are designed for use in locations where space is limited and larger,
Complete. Pressure Systems
Complete Pressure Systems Ready-to Use Calibration Solutions Pump Systems Designed for Your Specific Requirements AMETEK offers a variety of solutions for pressure generation and measurement. Our line
High Accuracy Mechanical Fuel meter FM-100
INSTRUCTION MANUAL S190, Rev A High Accuracy Mechanical Fuel meter FM-100 Congratulations on purchase of this World Class High Accuracy Mechanical Fuel Meter! Worldclass Mechanical Fuel Meter, extremely
Rimac Spring Tester Retro-Fit Kit
Rimac Spring Tester Retro-Fit Kit Fig 1 Check for All Parts Computer Cable Black Box Rimac Internal Spring Deflection Sensor & Bracket to Measure Force Valve Spring Length Sensor and Bracket Software CD
LIQUIDYNAMICS Oil Extractors
LIQUIDYNAMICS Oil Extractors This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Instruction & Parts Manual Model 24224T 6 gallon Oil Extractor Model 2420 21 gallon Oil
Auxiliary Equipment. Table of Contents. Auxiliary Equipment H-1. Product Product Code Technical Instructions Page #
Table of Contents Product Product Code Technical Instructions Page # Pneumatic Air Station Equipment 201/656/908 155-005/049/086/137P25 H-3 Pressure Gauges GA142AP 155-025P25 H-7 External Restrictors 184
TS1251 PRESSURE DISPENSER USER'S MANUAL
TS1251 PRESSURE DISPENSER USER'S MANUAL TABLE OF CONTENTS SECTION DESCRIPTION PAGE NUMBER 1.0 CAUTIONS AND WARNINGS... 3 2.0 INTRODUCTION... 4 3.0 DESCRIPTION... 4 & 5 4.0 SET UP AND INSTALLATION... 6
Car Wash / Pressure Washer
Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask
Air & Gas Industries
Air & Gas Industries A Unit of Air & Gas Holdings Pty Ltd ABN 14 213 772 690 2009 EQUIPMENT CATALOGUE Air & Gas Industries is based in Brisbane, Queensland & offers its services throughout Australia and
Filters, regulators, and lubricators
Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
IN-LINE HYDRAULIC FLOW TESTER
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
This catalog contains the following geothermal accessory products and specification guides:
f o r r e s i d e n t i a l s y s t e m s Geothermal systems offer an effective way to cut utility costs while ensuring comfort. Heat Controller s line includes two stage and single stage geothermal heat
ALUMINUM RESERVIOR 10,000 PSI, AIR-HYDRAULIC PUMP
15905 Instruction Manual & Parts List 2.5 Qt. Air Pump w/ Aluminum Reservoir Model 15905 ALUMINUM RESERVIOR 10,000 PSI, AIR-HYDRAULIC PUMP AME International 2324 Circuit Way Brooksville, Fl 34604 (877)775-4263
3000 Series filters 3/4" and 1" Ports
38 filters 3/4" and 1" Ports Technical data Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain Standard filter Coalescing filter Seals Filter baffle Aluminum Nylon Aluminum Brass + nitrile
2009 PRICE LIST. Prices FOB Ft. Myers, FL. Effective May 15, Subject to change without notice Suggested MODEL PORT SIZE HP RANGE
2009 PRICE LIST Prices FOB Ft. Myers, FL. Effective May 15, 2009. Subject to change without notice. INLINE FUEL CONDITIONER 2009 Suggested MODEL PORT SIZE HP RANGE US Retail Price LG-X 200 1/4" NPT or
Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
HARMSCO Hurricane Swing Bolt Water Filters Models: HUR 1X170FL, HUR 3X170FL HUR 5X170FL, & HUR 8X170FL
Models: HUR 1X170FL, HUR 3X170FL HUR 5X170FL, & HUR 8X170FL INSTALLATION AND OPERATION MANUAL HUR 8X170FL HUR 5X170FL HUR 3X170FL HUR 1X170FL Harmsco Filtration Products With Patented Up-Flow and Tangential/Rotational
Form No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI
Form No. 101249 Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP Max. Capacity: 10,000 PSI Air Motor Assembly See sheet 3 of 6 13 12 1 11 10 8, 9 Basic Pump Assembly See sheet 4 of 6
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
CB50E Controls & Components
CB50E Controls & Components Out of Electrical Phase Warning Light Hour Meter Electrical Phase Solector Switch Belly Box Harness Connection Travel Direction Polarity Switch Cutting Arm Polarity Switch Arm
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
Severe Service 40MM & 50MM SEVERE SERVICE GAUGE
Severe Service 40MM & 50MM SEVERE SERVICE GAUGE Copper Alloy Internals Glycerine Filled Center Back Mount Only Marsh Instruments Liquid-Filled Gauges are designed to perform in rugged and harsh environmental
O-Ring Crossover List
800-334-1711 I 200 Tech Drive» Sanford,FL 32771 I www.sealdistributors.com Pressure Gauges M02D-30BM 2 Dry gauge (0-30)(1/4 npt Back mount) M02D-30LM 2 Dry gauge (0-30) (1/4 npt Lower mount) M02D-60BM
GEORGIAN EQUIPMENT LTD.
GEORGIAN EQUIPMENT LTD. A COMPREHENSIVE SELECTION OF HIGH QUALITY HYDRAULIC PRODUCTS For more information 705-325-3431 E Electric Motor Pump Adaptors - PAE Series 5 F Filler Breathers - FB Series 15 Filter
MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
Spray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
Data Sheet 1009 Stainless Steel Case Gauge
FEATURES Meets ASME B40.100 specifications Corrosion resistant SS case Dry gauges are field fillable PowerFlex movement provides superior resistance to shock, vibration and pulsation True Zero reduces
Pressure gauge in stainless steel version. Suitable for aggressive media and environments. Aluminium, white with black lettering
Ed.17.01 Application in stainless steel version. Suitable for aggressive media and environments Design EN 837-1 Series 2840 WIKA model 232.50 Case size Nominal size dim 100 mm Accuracy Class 1,0% Case
ROV Dirty Work Pack Unit Datasheet
Datasheet Examples of features Compact, low weight High reliability valves as standard Simple Custom configurations Remote Start / Stop Remote pressure regulation option Internally pressure compensated
INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment
INFG-2R 10/10 Gemini & Infinity Finishing Pumps & Equipment Pump Basics for Smooth Operation Fluid Characteristics Influence Pump Selection Consider the following fluid characteristics when choosing your
Field-IQ & PumpRight for PWM Control. Pump Models & Flow Capability. Max Flow GPM
PumpRight Fertilizer System for Trimble Field-IQ (FmX or FM-1000 Displays) Field-IQ & PumpRight for PWM Control Number of Diaphragms 396-001230 Pump Models & Flow Capability Max Flow GPM Max GPA on 40
Hydrosafe - Model HSFS
Hydrosafe - Model HSFS Whole House Filtration and Water Treatment Triple-Treat Protection Three-In-One Technology The innovative HydroSafe filtration system incorporates three technologies in one unit
Marine Fuel Filtration. Marine FBO. Features:
The Racor assembly is specifically designed to meet the filtration requirements of today s high pressure common rail diesel injection systems. The unit is used for fuel dispensing pumps or as a primary
RSS RAM SAMPLING SYSTEM
N RSS RAM SAMPLING SYSTEM The SENSOR RAM Sample System (RSS) is designed to attach directly to the side of a tank or pipeline without the need to utilize, or create, a pressure differential to take a sample.
CALEFFI. FLOWCAL Automatic flow balancing valve with polymer cartridge. 121 series 01141/11 NA. Function
FLOWCAL Automatic flow balancing valve with polymer cartridge 121 series REGISTERED BSI EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01141/11 NA Function The FlowCal automatic
PORTABLE EXTRACTOR 500/500H ( ) 115V 230V
PORTABLE EXTRACTOR 500/500H (78-003 78-004) 115V 230V 500/500H TOP VIEW 03-00030 4 RIVET 3/16 X 1/2 AL/AL BLK AND 03-00204 1 RIVET - 3/16 X 5/8 TRI FOLD AL/AL 03-01547 1 WASHER FLAT.203 ID X.734 OD X.06
BURNABY MANUFACTURING LTD. USD PRICE LIST
TM LOW PRESSURE GAS OUTLET BOXES BURNABY MANUFACTURING LTD. USD - 2017 PRICE LIST GR0101-SS-50 Recessed Stainless Steel Gas Plug TM $ 119.66 - Recessed Box 3/8" & 1/2" NPT Inlet Connection - Fire Rated
USER MANUAL MODEL NUMBER: GK2T
USER MANUAL MODEL NUMBER: GK2T Doorway Central Station WARNING Read this manual completely and understand the machine before operating or servicing it.. Always wear protective clothing, gloves, and eyewear
liquid Pumps Air driven contents Chatsworth, California, USA LP500C
LP5C Air driven liquid Pumps contents Principle of Operation, Features, Why Use Air Driven Pumps...2 Typical Applications...3 Model Selection Table...4 Type of Materials in Contact with Fluid, Liquid Compatibility
Spray Pressure Control Manifold
Instruction Sheet P/N 0870-0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
& PumpRight for PWM Control. Maximum Pump Flow and Application Rates. Max Flow GPM
396-001070 PumpRight Fertilizer System for John Deere GS2 2600 & GS3 2630 & PumpRight for PWM Control Maximum Pump Flow and Application Rates Number of Diaphragms Max Flow GPM Max GPA on 40 at 6 MPH Max
MODEL DA0 DO-ALL SERIES IVP PRESSURE REDUCING REGULATORS SMALL PISTON, PILOT-OPERATED DA0-TB TECHNICAL BULLETIN FEATURES APPLICATIONS
TECHNICAL BULLETIN DA0-TB 09-12 MODEL DA0 DO- SERIES IVP PRESSURE REDUCING REGULATORS SM PISTON, PILOT-OPERATED Model DA0 is a pilot-operated steam reducing regulator with a piston design. The internal
HARMSCO Filtration Products BC6 Series
HARMSCO Filtration Products BC6 Series INSTALLATION AND OPERATION MANUAL Model BC6-1 Model BC6-2 Model BC6-3 BC6, MANUAL Safety Precautions: Before using and installing the parts of this product, please
SV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L
SV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L I&J FISNAR INC. 2003 GENERAL DESCRIPTION The SV1217-SS spray valve is operated by air pressure, providing precise deposit control for low to medium viscosity