Instructions for Lynx R Fairing - KTM EXC 500 Husqvarna 501
|
|
- Darcy Jennings
- 5 years ago
- Views:
Transcription
1 Instructions for Lynx R Fairing - KTM EXC 500 Husqvarna 501 Thank you for purchasing the Lynx R fairing. The kit includes the following parts : 1 x Fairing and 1x Screen 2x 16mm M6 button head screws 4x 25mm M6 flange bolts 4x Rubber washers 2x 10mm aluminum bottom bracket spacers 2 x plastic washers 2x M6 Flange Nuts 1 x Aluminum bottom bracket with threaded bolt, washer and Nylock nut 1 x ABS Dash. 1 x Wiring Harness Decal pack Fitting Note that the relocation of the indicator flashers will require you source KTM part # EXC flasher bracket shown here : Secure the Motorcycle in a vertical position. Remove the seat Remove OEM fairing mask and disconnect OEM light terminal at the white terminal block, indicator terminals and ignition switch. Unscrew the Speedo instrument holder from the front face of the top triple clamp. Unplug the speedo terminal and unscrew the speedo unit from it s mounting ( see photo). You will be re-using these screws to attach the instrument to the Lynx R dashboard Unplug and remove the small green indicator light from the speedo mount and set aside for relocation onto the Lynx dash later.
2 Fitting the Dashboard With the speedo set to one side, the speedo mount can now be relocated back to it s OEM position on the front face of the top triple clamp. You will also bolt the Lynx dashboard ( using the outer holes) and the KTM flasher bracket on top of the mount so that everything is secured together onto the front face of the top triple using the two 25mm flange bolts included with the kit as shown. IMPORTANT DASHBOARD LAYOUT INFORMATION With the dashboard installed, the most important part of your installation is the fitment of your instruments and switches etc. There are many different configurations open to you to customise your instrumentation as you see fit, which includes switches, warning lights, accessory power sockets, gauges and GPS s. Most important of all is the old Carpenters saying Measure twice and cut once
3 Fitting the OEM Speedo to the Lynx Dashboard You will need to decide where you wish to locate the speedo on the Lynx dash. Generally, you need to mount it low so that you have space for a GPS or other instruments. Also make sure that there is enough cable to reach the speedo in your desired position. NOTE : Before deciding on the final position of the speedo, check from the riding position that your view of the speedo is not hindered by the front Brake line and adjust the position accordingly. Normally you can position the speedo so the line passes above your view point, but below where you would place the GPS. Use the same hole pattern as the OEM speedo mount to mark out where to drill location holes for the speedo and then mount the speedo using a rubber washer on each side of the dashboard as shown. Plug the terminal back into the Speedo and then secure to the dashboard using the OEM screws you removed earlier. GPS Mounting If mounting a GPS, the best location is above the speedo and the GPS will mount using the makers GPS holder bolted to the surface of the ABS dashboard. Whilst the angle of the dashboard is suited to the rider viewing the instruments from the seated position, many prefer to have the GPS on an adjustable base so that the instrument can be angled and viewed when stood on the pegs. In this instance we recommend using the mount made by SW Motech which remains sturdy both on and off road ( see photo). The GPS holder can be wired into either the switched power accessory terminal, or the constant power accessory terminal ( see section on wiring harness). We do not recommend mounting a RAM arm from the dash surface due to excessive movement in off road conditions.
4 Fitting the ignition switch and directional indicator light Remove the ignition switch from its position on the OEM headlight unit. You will need to drill a suitable sized hole in the Lynx dashboard to relocate the ignition switch. We recommend using the side of the dashboard on the right side. Re connect the ignition to the wiring harness. Choose a suitable location to mount the green flasher indicator light and drill a hole in the dashboard for it. The hole size should be just big enough for you to be able to push the light into place. Indicator fitment Remove the indicators from the OEM headlight unit and using the same hardware, attach them to the indicator mounting bar you mounted earlier (KTM OEM part # flasher bracket ). Reconnect the indicator terminals to the main wiring.
5 Explaining the Lynx R Wiring Harness for the lights Your wiring harness comes complete and once plugged in, will be controlled from you OEM lighting circuit. The HID low beam lamp receives it s power directly from the battery via the relay, but the LED High beam lamp draws it s power from the bikes OEM Hi beam source. The reason the two lamps draw their power from different sources is to avoid overloading the OEM wiring circuit when both lamps are lit on High beam and also to help make sure that you always have one lamp working in the event of a major failure of either the Lynx wiring harness, or the bike s own lighting circuit. The small diode that you can see bridging between the High and low beam wires is there to ensure that the low beam remains on when the High beam is switched so you benefit from both lamps. You will also see that there are two, separately fused power circuits designed into the harness that can be used for powering accessories such as GPS, heated grips and power sockets. One of these circuits is switched through the ignition, the other is direct power from the battery and remains live at all times. Fitting the Lynx R wiring harness Loosen the bolts retaining the gas tank, but there is no need to disconnect the fuel supply, or remove the gas tank, but the tank will need to be lifted a little. The wiring harness has positive and negative wires with battery terminals and these need to be run down the left side of the bike, starting by feeding the wires between the forks and triple clamps at the front. Run the wires alongside other cables, under the gas tank and back to the battery area as shown Connect the power wire to the positive post on the battery and the ground to the negative post and then make sure the fuse is tucked away neatly and won t interfere with the seat when it is refitted. When you are happy that the wires are running neatly alongside the other wiring, take care to strap them along the frame with zip ties Replace the gas tank and seat
6 After making sure that you know where your instruments/accessories will be mounted on the dashboard, find a clear area on the back of the dash to locate the Relay. Make sure that you have enough reach to the relay and that the steering will sweep from side to side without pulling any of your wiring. Plug the white Hitachi terminal into the OEM headlight terminal you unplugged before Fitting power sockets to the dashboard The power sockets we supply are designed to plug straight into the Lynx wiring harness. Choose an appropriate location and use a hole saw to cut the correct sized hole in the dashboard and insert the socket. It is not obvious, but the twin USB socket has a magnetic switch in the cap, so that the small LED light will go out when the cap is on. This means there is no problem with battery drain, if the USB is plugged into the constant power accessory source on the Lynx harness if you choose. When locating the sockets, remember that the sides of the dashboard also make a good placement for the sockets. Fitting the bottom bracket Undo the two bolts that attach the front fender to front face of the bottom triple clamp. The bracket bolts up to the same location using two 25mm flange bolts supplied and two 10mm spacers between the bracket and the fender as shown. Attaching the screen Attach the screen with the two thumbscrews threaded into the two black plastic sliders that run in the channel on the back of the fairing. Tighten the thumbscrews up until the sliders just touch the back of the fairing and the screen can still slide up and down freely. Then thread the two Nylock nuts onto the extended thread until they just touch the back of the sliders. These act as a backstop to stop the thumbscrews being able to undo too far and allowing the screen to come out of the tracks. If set correctly, you should only need one turn on the thumbscrews to tighten the screen from fully undone.
7 Fitting the Fairing First, make sure that you strap all of the OEM wiring and the Lynx wiring harness wires at the back of the dash. Particularly, make sure the steering sweeps cleanly from side to side without pinching or stretching any of the wiring. The only wires that need to be kept free are the two headlight terminals that you will plug in when the fairing is fitted. Holding the fairing on the front fender, attach the light terminals and then slide the bottom of the fairing onto the two captive bolts on the bottom bracket. Then loosely clamp the top of the fairing and dash together using two 16mm button head screws and flange nuts No need to tighten yet, because you may be removing the fairing to adjust the lights. Now turn the ignition on and check the operation of the lights. Adjusting the lights High Beam : The LED is attached to the frame with a bolt on each side ( see photo). To adjust the lamp, you can normally push the top or bottom outer rim of the lamp and it will move a little. You will need a bit of force so DO NOT press on the lens of the lamp. Low Beam : The HID low beam is the most critical to set correctly and it s also the easiest to adjust. The lamp is retained by 3 adjuster screws and you should not need to adjust the top two and just use the bottom one for height adjustment ( see photo). In order to access the bottom adjuster with the fairing on, turn the handlebars to the right. Make height adjustments using a Philips screwdriver ( see photo) Turn CLOCKWISE to lower the beam height, ANTI CLOCKWISE to Raise the beam height.
8 IMPORTANT : If your height adjustment causes either lamp to touch the fairing openings it will cause an annoying vibrating noise and excessive wear. In this case, remove fairing and bring the lamp rearwards using the top and bottom adjusters ( turn adjusters Clockwise) When you are happy with the light adjustment, re-attach the fairing. Place a SS washer before fitting a nylock nut on the rubber grommet at the bottom and do not over tighten so that the grommet can work effectively to reduce vibration. A plastic washer should be fitted under the screw head on the fairing side of the top mount before securing with a flange nut on the dashboard side. Decals Included in the kit is a decal pack containing some different shapes and colours for you to apply if you wish. Application is the same as most decals and is best done by wetting the fairing surface first and then using a squeegy to smooth any air bubbles out. Final Check Make sure that all components are secure and that you have free movement from side to side with the handlebars.
9 Adjusting the screen Operation of the adjustable screen is straightforward. It is designed to slide down completely when off road (if desired) and can be adjusted to suit at highway speeds. Riders over six foot, will almost certainly place it in it s highest position, but experiment with different heights, because highest isn t always best. Do not over tighten the thumbscrews Manufactured by : Britannia Composites Ltd nd Drive, Langley, BC Canada V2Z 2M9 Tel ; 1 (604)
Fitting instructions for Lynx R Fairing DR650
Fitting instructions for Lynx R Fairing DR650 Thank you for purchasing the Lynx fairing. We hope the design features will extend the enjoyment of your DR. Parts List 1 x Fairing and screen with two thumb
More informationFitting instructions for Lynx R Fairing - KTM 690
Fitting instructions for Lynx R Fairing - KTM 690 Thank you for purchasing the Lynx R fairing. Your fairing kit comes largely completed, with most of the fitting time involved with the attachment of your
More informationInstructions for Lynx R Fairing - KTM EXC 500 Husqvarna 501
Instructions for Lynx R Fairing - KTM EXC 500 Husqvarna 501 Thank you for purchasing the Lynx R fairing. The kit includes the following parts : 1 x Fairing and 1x Screen 2x 16mm M6 button head bolts 4x
More informationFitting instructions for Lynx R Fairing CRF 250L
Fitting instructions for Lynx R Fairing CRF 250L Thank you for purchasing the Lynx fairing. We hope the design features will extend the enjoyment of your CRF. Parts List 1 x Fairing and screen with two
More informationFitting instructions for Lynx R Fairing - KTM 690
Fitting instructions for Lynx R Fairing - KTM 690 Thank you for purchasing the Lynx R fairing. Your fairing kit comes largely completed, with most of the fitting time involved with the attachment of your
More informationFitting instructions for Lynx R Fairing CRF 250L
Fitting instructions for Lynx R Fairing CRF 250L Thank you for purchasing the Lynx fairing. We hope the design features will extend the enjoyment of your CRF. Parts List 1 x Fairing and screen with two
More informationFitting instructions for Voodoo Fairing - KTM 950/990 Adventure
Fitting instructions for Voodoo Fairing - KTM 950/990 Adventure Thank you for purchasing the Voodoo fairing. Your fairing kit comes largely completed and includes the following. 1 x Fairing 1x Screen,
More informationEVO 2 FAIRING Rev6 18/05/ :40:00 1
EVO 2 FAIRING Rev6 18/05/2014 20:40:00 1 NOTE : BEFORE COMMENCING WORK ON THE CONVERSION, TAKE TIME TO READ THE INSTRUCTIONS CAREFULLY. ALL WORK CAN BE CARRIED OUT BY A COMPETENT MECHANIC, BUT IF YOU ARE
More informationTusk UTV Horn & Signal Kit Installation Instructions
Tusk UTV Horn & Signal Kit Installation Instructions The Tusk UTV signal kit is designed to be a simple way to provide front and rear turn signals, license plate mount with light, horn, and rearview mirrors
More informationINSTALLATION INSTRUCTIONS
R A D E G A R A G E. C O M F 2 A D V E N T U R E K I T INSTALLATION INSTRUCTIONS M A D E B Y E N T H U S I A S T S DEAR MOTORCYCLE ENTHUSIASTS AND RADE GARAGE FANS Thank you for buying Rade Garage 690
More informationINSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT
INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE CROSS COUNTRY / CROSS ROADS / HARD BALL RAKE KIT Thank you for choosing the Motor Trike Cross Country / Cross Roads / Hard Ball rake kit. We ask that you read
More informationEnglish. Fitting Instructions: Thunderbird A and A of 13
English Fitting Instructions: Thunderbird A998099 and A99800 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven engineering, exhaustive
More informationPage 1. File: Motolight caliper one-piece Harley Date: 8/15/2006
Page 1 Harley-Davidson FL Caliper Mount Installation One-piece mounting brackets You should allow about two to three hours for installation. We suggest you use a well-lighted space for installation. PLEASE
More informationINSTALLATION FORK MOUNTED DRIVING LIGHTS 5008
5008 PARTS INCLUDED 1 Right Fork Mount Assembly 1 Left Fork Mount Assembly 2 H3 Driving Light Assemblies 1 12-Pin Wiring Adapter 1 Hardware Kit for Fork Mount Driving Lights, Including: 6 5/16-18 Nylock
More informationSADDLEBAG AUDIO WIRE HARNESS KIT P/N
SADDLEBAG AUDIO WIRE HARNESS KIT P/N 2880986 APPLICATION ALL INDIAN MOTORCYCLES WITH BOTH TRUNK AND SADDLEBAG AUDIO INSTALLED BEFORE YOU BEGIN Read these instructions and check to be sure all parts and
More informationSherco Motorcycle Assembly Instructions
Sherco Motorcycle Assembly This manual is intended to be used as an assembly guide for the Sherco 1.25 2.9 Trials Motorcycles. The motorcycle shown in the pictures is a new 2002, 2.9, the one that you
More informationATTENTION. Custom Dynamics UTV Turn Signal Kit Installation Instructions
Custom Dynamics UTV Kit Installation Instructions We thank you for purchasing the Custom Dynamics UTV LED Kit. Our products utilize the latest technology and high quality components to ensure you the most
More informationPage 1. File: Motolight caliper one-piece Date: 8/14/2006
Page 1 Caliper Mount Installation One-piece mounting brackets You should allow about two to three hours for installation. We suggest you use a well-lighted space for installation. PLEASE READ ALL THE INSTRUCTIONS.
More informationLAND ROVER DISCOVERY 3 ARB BULL BAR AND WINCH BAR WARNING
LAND ROVER DISCOVERY 3 ARB BULL BAR AND WINCH BAR PART No 3432150 DISCOVERY 3 WINCH BAR PART No 3232150 DISCOVERY 3 BULL BAR WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH
More informationDetroit Speed, Inc. Selecta-Speed Wiper Kit Corvette P/N:
Detroit Speed, Inc. Selecta-Speed Wiper Kit 1963-67 Corvette P/N: 121620 A downpour of rain will no longer hinder your ability to clearly see the road. The Detroit Speed Selecta-Speed Wiper Kit provides
More informationFITTING KIT No s : BULL BAR WINCH ( P/No ) BULL BAR NON WINCH ( P/No )
ARB WINCH / NON WINCH BULL BAR TO SUIT LANDROVER DISCOVERY 2003 ONWARD. FITTING KIT No s :- 617 1793 BULL BAR WINCH ( P/No 343 2120 ) 617 1794 BULL BAR NON WINCH ( P/No 323 2120 ) WARNING FOR VEHICLES
More informationIn This DIY We Will Show You How To Install Recon Backup Lamps (part # To Run On A Separate Switch & In Reverse.
In This DIY We Will Show You How To Install Recon Backup Lamps (part # 264150 To Run On A Separate Switch & In Reverse. Please Note, There Are Many Ways of Installing These Lights, Including Wiring Methods,
More informationJEEP JK4 STEP SLIDER INSTALLATION BD-SS-100-JK4
JEEP JK4 STEP SLIDER INSTALLATION BD-SS-100-JK4 PARTS LIST QTY DESCRIPTION 1 Drivers Side Slider Assembly 1 Passenger Side Slider Assembly 1 Wiring Harness and Fuse 1 Double Sided Sticky Squares and Alcohol
More informationMustang HID Headlight Installation Guide (9007)
Mustang HID Headlight Installation Guide 1994-2004 (9007) The below installation instructions work for the following products: 9007 Bulb HID Headlight Coversion Kit 1994-2004 The following are a set of
More informationWolverine Turn Signal / Horn Kit 2102
All years Yamaha Wolverine STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR ALL YEAR AND MODELS YAMAHA WOLVERINE. IF YOUR MACHINE IS NOT ONE OF THESE MODELS DO NOT PROCEED. Contact Ryco Motorsports or your
More information2004/2013 Harley Davidson Road Glide
2004/2013 Harley Davidson Road Glide VORTEX XMC-575OD SERIES SPECIFICATIONS 1. Warranty : Extended 2. Input Voltage : 12V 3. Modes : Low, High, Halo 4. LED Lifespan : 50,000 Hours WARNING: Due to excessive
More informationProgressive Suspension Airtail I.A.S.
5572 Fresca Drive, La Palma, CA 90623 714.523.8700, FAX 714.523.3220 Progressive Suspension Airtail I.A.S. Installation Instructions for Harley Davidson E.C.C. with Compressor Kit FLH/FLT Models with and
More informationINSTALLATION INSTRUCTIONS FOR THE TOMAHAWK ELECTRIC REVERSE
INSTALLATION INSTRUCTIONS FOR THE TOMAHAWK ELECTRIC REVERSE LAST UPDATED: April 2018 Thank you for choosing the Motor Trike Electric Reverse. We ask that you read the directions before you start and follow
More informationJEEP JK4 STEP SLIDER INSTALLATION BD-SS-100-JK4
JEEP JK4 STEP SLIDER INSTALLATION BD-SS-100-JK4 PARTS LIST QTY DESCRIPTION 1 Drivers Side Slider Assembly 1 Passenger Side Slider Assembly 1 Wiring Harness and Fuse 1 Double Sided Sticky Squares and Alcohol
More informationFitting Instructions: Tiger 800 and Tiger 800XC A and A to VIN and from VIN to VIN A
English Fitting Instructions: Tiger 800 and Tiger 800XC A98800 and A9880 to VIN 64 and from VIN 69457 to VIN 607 A98807 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is
More informationR-SE JK 4 DOOR Step Slider Install Instructions. *If any parts listed are missing or damages please call prior to install.
R-SE JK 4 DOOR Step Slider Install Instructions Parts List: 1 Divers side slider assembly 1 Passenger side slider assembly 1 wiring harness 1 control box 2 spacers 2 LED lights (optional) 10 SS Button
More informationTusk Pannier Racks. Instructions and information KLR
1 Tusk Pannier Racks Instructions and information KLR650 2008 + Congratulations on your purchase of the Tusk Pannier Racks. These racks are made to handle extreme adventure riding, but work great for the
More informationFitting Instructions: Sprint ST (955i), Sprint RS & Tiger 955cc Heated Grip Kit
Fitting Instructions: Sprint ST (955i), Sprint RS & Tiger 955cc Heated Grip Kit This accessory kit is designed for use on Triumph Sprint ST (955i), Sprint RS & Tiger 955cc motorcycles only and should not
More informationw w w. h d o n l i n e s h o p. d e ROAD TECH QUEST GLOBAL POSITIONING SYSTEM (GPS) MOUNTING KIT GENERAL INSTALLATION -J03554 REV.
-J03554 REV. 007-08-0 ROAD TECH QUEST GLOBAL POSITIONING SYSTEM (GPS) MOUNTING KIT GENERAL Kit Number 900-05 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories
More informationFREIGHT TRAIN HEADLAMP NACELLE KITS
-J09 0-08-8 FREIGHT TRAIN HEADLAMP NACELLE KITS GENERAL Kit Numbers 6000, 600 Models For model fitment information, see the P&A retail catalog or the Parts and Accessories section of wwwharley-davidsoncom
More informationw w w. h d o n l i n e s h o p. d e CRUISE CONTROL KIT GENERAL INSTALLATION -J04064 REV Kit Number Models Additional Parts Required
-J006 REV. 006-08- CRUISE CONTROL KIT GENERAL Kit Number 7796-07 Models For the most up-to-date model fitment information, please see the product label or www.harley-davidson.com. Additional Parts Required.
More informationFord Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List:
2015-2017 Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List: LED Foglights/ Bezels 2 Flat head & Phillips screwdriver (if you ordered part#3600) Ratchet & Socket set OR Wiring harness
More information2013 Road King CVO FLHRSE5 Detachable Fairing w/ Garmin Zumo 665 Installation Instructions
2013 Road King CVO FLHRSE5 Detachable Fairing w/ Garmin Zumo 665 Installation Instructions 1 1. Turn ignition switch to on position and leave there. This will prevent alarm from going off when you disconnect
More informationGP1-R FULL EXHAUST SUZUKI GSX-R600 / GSX-R
THIS EXHAUST SYSTEM IS DESIGNED FOR USE IN CLOSED COURSE RACING ONLY, AND IS NOT INTENDED FOR PUBLIC HIGHWAY USE. IN THE STATE OF CALIFORNIA, IT IS ILLEGAL TO MODIFY THE EMISSION CONTROL SYSTEM ON ANY
More informationAutomatic Electronic Sport Mode Shifter Installation Instructions
Automatic Electronic Sport Mode Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 tech@lokar.com www.lokar.com Release Automatic Electronic Sport Mode
More informationINSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE GL1500 RAKE KIT
INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE GL1500 RAKE KIT Thank you for choosing the Motor Trike GL1500 Rake Kit. We ask that you read the directions before you start and follow them very closely.
More informationINSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274
INSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274 PARTS CHECKLIST Tuffy Console #9 Left Front Mounting Bracket #10 Right Front Mounting Bracket #11 Electronics mounting bracket #12 Divider
More informationI N S TA L L AT I O N
I N S TA L L AT I O N 5008 fits: H-D: '80-Up Electra glide, tour glide, road king, road glide or street glide PartS Included 1 Right Fork Mount Assembly 1 Left Fork Mount Assembly 2 H3 Driving Light Assemblies
More informationINSTALLATION. DRIVING LIGHTS for FLHT/FLHX/FLHR 5005
DRIVING LIGHTS for FLHT/FLHX/FLHR 5005 PARTS INCLUDED 1 Right Driving Light Assembly 1 Left Driving Light Assembly 1 Right Driving Light Bracket 1 Left Driving Light Bracket 4 Driving Light Bracket Plugs
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 2017+ BMW R9T Racer HeliBars Replacement Triple Clamp w/built in Risers Part # HRT05126 IMPORTANT: PLEASE GIVE CUSTOMER ENCLOSED INFORMATION! Thank you for your purchase of our
More informationINSTALLATION LIGHTED CURVED LAY DOWN LICENSE PLATE MOUNT 3166
INSTALLATION LIGHTED CURVED LAY DOWN LICENSE PLATE MOUNT 3166 PARTS INCLUDED 1 Lighted Curved Lay Down License Plate Assembly 1 Hardware Kit Including: 6 Cable Ties 1 Dielectric Grease Pack 1 1 x 8 Tape
More informationCVO - with ipod Amp & Speaker Upgrade Install Instructions for Batwing Fairing
CVO - with ipod Amp & Speaker Upgrade Install Instructions for Batwing Fairing Tools Needed: 1/2 inch Socket Wire Cutters 7/16 inch Socket Wire Strippers 5/16 inch Socket Phillips Screwdriver 1/2 inch
More informationw w w. h d o n l i n e s h o p. d e HEATED HAND GRIP KITS GENERAL REMOVAL -J02983 REV Kit Number Models Kit numbers Service Parts
-J098 REV. 007-0-0 GENERAL Kit Number 56047-0B, 5607-0B, 5674-0B, 5696-0B, 565-0B, 5669-0A, 56694-04A, 56750-04A, 5688-0A, 569-05, 5696-05, 56997-07 Models For model fitment information, please see the
More informationFuel Tank Fitment Instructions Tusk/Rally Raid Products/Seat Concepts kit Husqvarna 701 Enduro
Fuel Tank Fitment Instructions Tusk/Rally Raid Products/Seat Concepts kit Husqvarna 701 Enduro Part #1849120001, 1849120002, 1849110001, 1849110002 Thank you for purchasing the Tusk/Rally Raid Products
More informationWe recommend installing the TRS Racebars first as we have done
Thanks for purchasing the 2 Front Lowering Kit for the Honda Grom (MSX125). This is a basic installation guide, and we tried to cover everything, but use your best judgment along the process. It is recommended
More informationEnglish. Fitting Instructions: America and Speedmaster A and A of 15
English Fitting Instructions: America and Speedmaster A98800 and A988006 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven engineering,
More informationINSTALLATION INSTRUCTIONS Horizon XP Performance Handlebar
INSTALLATION INSTRUCTIONS Horizon XP Performance Handlebar HZ10090XP, HZ10090XP-BA (1 Mount) Gen 1 HZ10093XP, HZ10093XP-BA (1 1/4 Mount) Gen 1 HZ10096XP, HZ10096XP-BA ( 1 1/4 Mount) Gen 2 HZ10097XP, HZ10097XP-BA
More informationRC 390 WHITE ABS US 2015
SPAREPARTSCATALOG: // CHASSIS RC 390 WHITE ABS US 05 ART.-NR.: 3CFF5375OEN CONTENT RC 390 WHITE ABS US 05 FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS SHOCK ABSORBER FRAME 5 SWING ARM 8 TANK, SEAT, COVERS
More informationTTR225/250 DUAL S PORT K IT I NSTALLATION I NSTRUCTIONS
TTR225/250 DUAL S PORT K IT I NSTALLATION I NSTRUCTIONS KIT CONTENTS Inspect Your Kit Your kit will include the following items A. TTR225/250 Instructions and Wiring Diagrams Read through the entire instruction
More informationDepress each tab as you pull the bezel off. The bezels are tight. L.H. shown.
2013-2014 Ford Mustang V6 & Boss 302 Lower Valance Fog Light Kit Parts List: Quantity: Tool List: Fog light & bulb with bracket 2 Flat head & Phillips screwdriver Black bezels 2 Ratchet & Socket set OR
More informationDetroit Speed, Inc. Selecta-Speed Wiper Kit Mustang P/N:
Detroit Speed, Inc. Selecta-Speed Wiper Kit 1967-68 Mustang P/N: 121651 A downpour of rain will no longer hinder your ability to clearly see the road. The Detroit Speed Inc. Selecta-Speed Wiper Kit provides
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 22903-22963 ODYSSEY Issue Date MAY 2002 PARTS LIST Subwoofer Kit: P/N 08A39-EP7-100 Subwoofer 2 Cushion tapes 8 Wire ties (1 not used)
More informationAmp & Speaker Upgrade Install Instructions for Victory Cross Country
Amp & Speaker Upgrade Install Instructions for Victory Cross Country Tools Needed: 13mm Socket 4mm Ball Head Allen Socket 5mm Allen Wrench 10mm Wrench Wire Cutters Wire Strippers Phillips Screwdriver Pocket
More informationEnglish. Fitting Instructions: America and Speedmaster A , A , A and A of 14 A
English Fitting Instructions: America and Speedmaster A97087, A97088, A970850 and A98800 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of
More informationMAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS
MAZDA BT-50 (October 0 Production Onwards) & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS Installation Time: Approx. 0 Minutes Care Instructions: Clean Tonneau Cover with a mild detergent
More informationUSER INSTRUCTIONS STRIKER LED USER INSTRUCTIONS
USER INSTRUCTIONS STRIKER LED USER INSTRUCTIONS 1 DIY TWIN PACK WITH INSTALLATION KIT CONTENTS 2 x Striker LED driving lights 2 x Spot filters 2 x Reversible mount and hardware 1 x User instructions 1
More informationINSTRUCTIONS. w w w. h d o n l i n e s h o p. d e ENGINE GUARD-MOUNTED FOG LAMP KIT 1WARNING -J02798 REV Installation.
INSTRUCTIONS -J0798 REV. 9-4-00 Kit Number 689-98B General ENGINE GUARD-MOUNTED FOG LAMP KIT Installation This kit fits all models equipped with Harley-Davidson -/4 in. ( mm) diameter front engine guards,
More informationOIL COOLER INSTALLATION GUIDE ULTRACOOL, INC. Web:
ULTRACOOL, INC 68 South Rainbow Drive Bldg #10 Dayton, NV 89403 OIL COOLER Touring INSTALLATION GUIDE Models 1994-2008 2.0 Version - Includes Trikes 'Call for fitment on earlier models Direct: (775)-241-9155
More informationROAD TECH ZUMO GLOBAL POSITIONING SYSTEM (GPS) HANDLE- BAR MOUNT KIT
-J046 REV. 008-08- ROAD TECH ZUMO GLOBAL POSITIONING SYSTEM (GPS) HANDLE- BAR MOUNT KIT GENERAL Kit Number 965-08 Models This kit is required when using a Road Tech Zumo GPS unit on specific model motorcycles.
More informationBA /02/03/04/06/07/08/13/13B/15 BIG AIR KIT (BAK) - Yamaha Road Star (99-07)
BA-2020-00/02/03/04/06/07/08/13/13B/15 BIG AIR KIT (BAK) - Yamaha Road Star (99-07) Page: 1 Revision: 6.2-02/23/2011 Install Time: 1.5 Hours We recommend a qualified Yamaha technician install this kit
More informationTurn Signal / Horn Kit PN 7101 by All years Polaris RZR 1000 and RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED
All years Polaris RZR 1000 and 1000-4 2015 RZR 900, 900-4, 900 trail, 900S and 900XC STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR ALL YEAR AND MODEL POLARIS RZR 1000 AND 1000-4. ALSO THE 2015 POLARIS RZR
More informationRemove black panel shown. Save 6 retaining pins for re-install later. Pry up on center part of pin first. Then pry out entire retaining pin.
2005-2009 Ford Mustang V6 Fog Light Wiring Kit Parts List: Quantity: Tools Required: Wiring harness 1 Flat head screwdriver Supplemental wire leads 2 Ratchet & Socket set OR Wire tap red 2 Adjustable Wrench
More informationLGT-312L E-Z-Go TXT Light Bar Bumper Kit Installation Instructions
LGT-312L E-Z-Go TXT 2014+ Light Bar Bumper Kit Installation Instructions Caution: Please read through the instructions carefully. Before starting this project, remove the system s positive and negative
More informationAmp & Speaker Upgrade Install Instructions for Batwing Fairing
Amp & Speaker Upgrade Install Instructions for Batwing Fairing Tools Needed: 1/2 inch Socket Wire Cutters 7/16 inch Socket Wire Strippers 10 mm Socket Phillips Screwdriver 1/2 inch Ratchet Wrench T25 Torx
More informationTOYOTA FJ CRUISER 6 SUSPENSION KIT
92177000 TOYOTA FJ CRUISER 6 SUSPENSION KIT Thank you for choosing Rough Country for your suspension needs. Rough Country recommends a certified technician installs this system. In addition to these instructions,
More informationINSTALLATION INSTRUCTIONS Horizon CCR HZ13054
INSTALLATION INSTRUCTIONS Horizon CCR HZ13054 IMPORTANT: PLEASE GIVE CUSTOMER ENCLOSED INFORMATION! Thank you for your purchase of our HeliBars. They are designed to increase your long distance comfort
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS BMW S1000RR 2015+ TracStar Replacement Handlebars P/N: TS05099 IMPORTANT: PLEASE GIVE CUSTOMER ENCLOSED INFORMATION! Thank you for your purchase of our HeliBars. They are designed
More informationParts List. Please be sure to read our instructions thoroughly before attempting installation. D2/G2 Parts List. D31/G31 Parts List.
Parts List Please be sure to read our instructions thoroughly before attempting installation. D2/G2 Parts List D31/G31 Parts List Page 2 1 Step 1: Bike Preparation Step 1: Bike Preparation There are two
More information09-12 Dodge 4WD /4 Body Lift
92RC80000 09-12 Dodge 4WD 1500 1 1/4 Body Lift Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this kit. Attempts to install
More informationThank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit For R56, R58, R59, R60 with Refresh Engines (2011+)
Thank you for purchasing the Craven Speed FlexPod Complete Gauge Pod Kit For R56, R58, R59, R60 with Refresh Engines (2011+) Before You Start Please read instructions completely before installing. These
More informationLED Driving Light Set For 2014 & Newer Can-Am Spyder RT # CA006-RT
LED Driving Light Set For 2014 & Newer Can-Am Spyder RT # CA006-RT 1. Lay-out and familiarize yourself with the components supplied with this set. 2. Remove the left mirror by pulling firmly outward on
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S Application 2010 INSIGHT Publications No. AII 40881 Issue Date MARCH 2009 PARTS LIST Right fog light bracket D Fog Lights Kit P/N 08V31-TM8-100 Left fog light Fog
More informationRetro it Steering Column
Retro it Steering Column INSTALLATION INSTRUCTIONS for 1976-86 CJ5 & CJ7 FOR PART NUMBER S: 1520800010, 1520800020, 1520800051, 1526800010, 1526800020, 1526800051 S I NCE 1986 Instruction # 8000000010
More informationTJ YJ LJ STEP SLIDER INSTALLATION
TJ YJ LJ STEP SLIDER INSTALLATION BD-SS-100-TJ, BD-SS-100-YJ, BD-SS-100-LJ PARTS LIST QTY DESCRIPTION 1 Drivers Side Slider Assembly 1 Passenger Side Slider Assembly 1 Wiring Harness 1 Double Sided Sticky
More informationEnglish. Fitting Instructions: Thunderbird Commander and Thunderbird LT A of 7. Parts Supplied:
English Fitting Instructions: Thunderbird Commander and Thunderbird LT A968089 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven engineering,
More informationOXFORD. OF690 Adventure. OF691 Touring. OF692 Sports. Page 2-7. v.8 switch 09/07/12
OXFORD Page 2-7 Page 8-13 Page 14-19 Page 20-26 OF690 Adventure Page 27-32 Page 33-39 OF691 Touring OF692 Sports www.oxprod.com v.8 switch 09/07/12 Oxford HotGrips : Fitting and User Instructions for part
More informationJEEP JK4 STEP SLIDER INSTALLATION BD-SS-200-JK4 / BD-SS-201-JK4
JEEP JK4 STEP SLIDER INSTALLATION BD-SS-200-JK4 / BD-SS-201-JK4 Installaton Instructon RSEI 106 P A R TS L IST QTY DESCRIPTION 1 Drivers Side Slider Assembly 1 Passenger Side Slider Assembly 1 Wiring Harness
More informationMustang Shaker
2005-2009 Mustang Shaker CDC #110050 ( 05/ 06) or 0711-7000-01 ( 07/ 09) Component Check List: Quantity/Description Part # CDC Installer 1 - Engine Cover Assembly 114050 1 - Aluminum Shaker Scoop 183020
More informationINSTRUCTIONS. w w w. h d o n l i n e s h o p. d e SPRINGER AUXILIARY LAMP KIT 1WARNING -J03497 REV General.
INSTRUCTIONS -J097 REV. 0-0-00 Kit Number 6986-0A General Auxiliary/fog lamps are not included in this kit. The lamps must be purchased separately. HDI (International) motorcycles should only use approved
More informationVRSC-DX Truck-Lite LED Headlight Installation Instructions
VRSC-DX Truck-Lite LED Headlight Installation Instructions The following Instructions are for installing a 7 Truck-Lite LED headlight into a Harley Davidson VRSC-DX Night Rod Special fairing. Other 7 headlights
More information2016 HONDA 1000 Pioneer PN 3102 Turn signal / horn kit rev nc
2016 Honda 1000 Pioneer STOP - THIS KIT IS DESIGNED SPECIFICALLY FOR 2016 HONDA 1000 PIONEER IF YOUR MACHINE IS NOT THIS MODEL DO NOT PROCEED. THIS KIT DOES NOT WORK ON THE PIONEER 500 nor 700 S. Contact
More information20 Rigid Industries LED Light Bar Installation into a 2002 Ford Super Duty
20 Rigid Industries LED Light Bar Installation into a 2002 Ford Super Duty This write-up is how I installed the Rigid Industries 20" E-Series LED Light Bar into the grill area behind the license plate
More informationInstallation Instructions Jeep CJ-7
Retrofit Steering Column Installation Instructions 1976-86 Jeep CJ-7 For Part # s 1520800010, 152800020, 1520800051 www.ididitinc.com 610 S. Maumee St., Tecumseh, MI 49286 (517) 424-0577 (517) 424-7293
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 26031 2004 ODYSSEY Issue Date AUG 2003 NOTE: You cannot install the subwoofer in a vehicle equipped with both an under seat Navigation
More informationR O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP
R O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP Please thoroughly review the instructions before and during installation. Keep in mind that this product was designed to be installed by trained dealer
More informationTriumph Trophy SE Dash Mounted Accessory Shelf. Owner s / Installation Manual
Triumph Trophy SE Dash Mounted Accessory Shelf Triumph Trophy SE Dash Mounted Accessory Shelf Congratulations on your purchase of the Triumph Trophy SE Dash Mounted Accessory Shelf. When properly mounted,
More information07-11 GM 4WD 1500 P/U 1 1/4 Body Lift
92RC70100 07-11 GM 4WD 1500 P/U 1 1/4 Body Lift Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this kit. Attempts to install
More informationJEEP JL INSTALL GUIDE
JEEP JL INSTALL GUIDE S-TECH Switch Systems DEVELOPED, DESIGNED, MANUFACTURED and Assembled in the Rocky Mountains of Colorado, known to many as JEEP COUNTRY. Trail riding at 10,000 feet at night requires
More informationCobra & Cobra XL. Power Trak Current GL1800 Goldwing. Installation Instructions. California Sidecar Parts & Technical Support
Cobra & Cobra XL by 2001 - Current GL1800 Goldwing Power Trak 6 Installation Instructions REVISED 1 2015 California Sidecar Parts & Technical Support 434.263.8866 Warnings and considerations: 1. Disclaimer
More informationCBR250 Fitment Guide
CBR250 Fitment Guide 35W Bulbs Before 60W GT150 Power2Night Bulbs The mod is designed to allow the headlights to be upgraded from the 35W bulbs to 60W bulbs. Normally, this would cause flat battery trouble
More informationTachometer Kit Fitting Instructions - Bonneville
WARNING: Always have Triumph approved parts, accessories and conversions fitted by a trained technician of an authorised Triumph dealer. The fitment of parts, accessories and conversions by a technician
More informationBe sure to read and go over all pages before you start your installation
Yamaha Gen-2 V-MaxV Holeshot Superbike Bars Installation Guide Pre-Installation Note Be sure to read and go over all pages before you start your installation Preparation for Installation A) It is recommended
More informationAccessory Fitting Instructions
Accessory Fitting Instructions Top Box Kit Kit number T5097 T5060 T504 T5680 A9500748 A9500749 To be used with Models Affected Tiger Explorer, Tiger Explorer XC, Tiger Explorer XR, Tiger Explorer XRX,
More informationU L T I M A T E R A D A R / L A S E R D E F E N S E S Y S T E M
S m a r t e r Q u i e t e r M o r e A c c u r a t e U L T I M A T E R A D A R / L A S E R D E F E N S E S Y S T E M Installation Manual PASSPORT 9500ci Comes Complete Front Radar Receiver Miniature weatherproof
More information09-12 Dodge 4WD Leveling Kit
9235900 09-12 Dodge 4WD 1500 2.5 Leveling Kit Thank you for choosing Rough Country for all your suspension needs. DOES NOT FIT TRX PACKAGE VEHICLES!! Rough Country recommends a certified technician install
More information