Displays & Optoelectronics

Transcription

1 Displays & Optoelectronics - contents 37 Displays Indicators Optoelectronics 859 LED Modules 900 Heatsinks 901 Light Engines 901 OLED Lighting 901 Drivers 901 Image Sensors 903 Visit our website for additional price information and exciting promotions 899

2 JKL Components LED Modules LED Light Bar and Accessories LED rigid strip, segmentable Input power and join the LED light bars with connector harnesses ON-LINE Seoul Semiconductor LED Modules Z-Power LED P5-II Series Power chip on a package that provides full colour Su high Flux output and high Luminance Designed for high current oation Low thermal resistance SMT solderability Suitable for decoration lighting Package 20mm Star V F (Typ.) 2.5 / 3.8 / 3.6 V Colour Red / Green / Blue I F (Typ.) 350 ma Peak Wavelength 625 / 525 / 460 nm View Angle 120 Luminous Flux 35 / 57 / 13 lumens Cool White Light Bar, segmentable Warm White Light Bar, segmentable Accessories Luminous Flux (lm) Kingbright LED Modules Cluster 26mm Cluster 52mm LUMILED LED Modules Mating Connector for Luxeon Flood Light Source OSRAM LED Modules Price STM Golden DRAGON LEDs board 70 a unit a unit Price Input Connector Harness for use with ZRS-8480 LED Light Bars Joiner Connector Harness for use with ZRS-8480 LED Light Bars PCB Mounting Clip for LED rigid strip 8mm, ZRS-8480 LED Light Bars Oating Temature Range C Package 26mm cluster View Angle 40 a unit a unit a unit BL unit BL unit BL unit Colour Red View Angle 40 Peak Wavelength 660 nm Oating Temature Range C Intensity mcd Power Dissipation 2.5 W V F (Typ.) 9.6 V V R (Max.) 5 V 250 ma BL unit a unit This board is an option to the STEVAL-ILL009V3. As a light source, there are four Golden DRAGON LEDs used with a maximum forward current of 350mA. The STEVAL-ILL009V1 can drive eight Golden DRAGON LEDs. To demonstrate the driving capability of the STP04CM596, only four LEDs are used on the load board. This means that one STP04CM596 driver is not used. An STLM20 temature sensor is assembled in the middle of the LEDs to protect against overheating. White SMT LED package, colourless clear silicone resin Feature of the device: point lightsource with high luminous efficiency and low space ESD-withstand voltage: up to 2 kv acc. to JESD22-A114-B STEVAL-ILL009V unit F c unit Z-Power LED P7 Series The Z-Power LED P7 series is single LED package providing a brightness of up to 900 lumens, and an efficacy of up to 90 lumens watt to replace conventional bulbs. Su high flux output and high luminance Designed for high current oation Low thermal resistance SMT solderbility Colour White I F (Typ.) 2800 ma Colour Temature 6300 K V F (Typ.) 3.6 V Luminous Flux 700 lumens View Angle 130 W724C02 c unit Way Forward Technologies LED Modules Linear LED Array Aluminium substrate with dielectric layer and thermal bonding tape applied for ease of mounting on to suitable heat sink Designed to oate on 24V DC constant voltage supply On board current control to optimize formance and efficiency Push fit terminals for quick assembly Dimensions 488x20x6mm Colour Temature 6000 K Dimensions 488 x 20 x 6 mm Oating Voltage 24 V Colour White Luminous Flux (lm) Power Dissipation (W) (ma) 100L-42/330/24/WC L-28/200/24/WC L-14/100/24/WC L-42/330/24/WC unit L-28/200/24/WC unit L-14/100/24/WC unit Circular LED Array Aluminium substrate with dielectric layer and thermal bonding tape applied for ease of mounting on to suitable heat sink Designed to oate on 24V DC constant voltage supply On board current control to optimize formance and efficiency Screw Terminals 113R types are fitted with Emergency / Night Light feature Power Dissipation 20.4 W Dimensions Ø 138 mm Oating Voltage 24 V Colour White 850 ma Luminous Flux (lm) Colour Temature (K) 112R-12/850/24/WC R-12/850/24/WW R-12/850/24/WC R-12/850/24/WW R-12/850/24/WC unit R-12/850/24/WW unit R-12/850/24/WC unit R-12/850/24/WW unit OM = Order Multiple c Also available in Production Packaging, visit RS Online Indicates more pricing available online a New product to range * manufacturers information unavailable at time of printing

3 Lighting Science Heatsinks Atlas Heat Sink Designed for optimal Thermal Performance with Atlas NT-4000 families of light engines Radial Shaped for design flexibility Drilled and tapped for ease of assembly Anodized for enhanced thermal formance Designed for a wide range of mounting positions Finish Colour Anodised Black Light Engines Atlas Series LED Light Engines Round footprint for design flexibility Designed for popular drive currents from 700mA to 1050mA Isolated metal base makes wiring in series or parallel possible on a common heatsink Integrated ESD protection V HBM Suior thermal formance for unmatched reliability EZ-Connect Light Source Light engine mounted on EZ-Connect board Ready to power with the popular drive currents Suior thermal formance for unmatched reliability Atlas Heatsink Ø63.5mm (2.5in.), 12.7mm (0.5in.) HS Atlas Heatsink Ø63.5mm (2.5in.), 19.04mm (0.75in.) HS Atlas Heatsink Ø63.5mm (2.5in.), 25.4mm (1in.) HS Atlas Heatsink Ø63.5mm (2.5in.), 38.09mm (1.5in.) HS (mm) Price Atlas Heatsink Ø63.5 x unit Atlas Heatsink Ø63.5 x unit Atlas Heatsink Ø63.5 x unit Atlas Heatsink Ø63.5 x unit Colour Peak Wavelength Power Dissipation (ma) Luminous Flux (lm) NT-41A Red 629 nm 3.3 W NT-41E Amber 594 nm 3.4 W NT-42C Green 535 nm 5.2 W NT-42B Blue 470 nm 4.8 W NT-43F RGB 629 / 535 / 470 nm 1.7 / 2.6 / 2.8 W / 109 / NT-42D Warm White 5.3 W NT-45D Warm White 5.3 W NT2-42D Warm White * NT-42D Daylight White 5.3 W NT-45D Daylight White 5.3 W NT-41A unit NT-41E unit NT-42C unit NT-42B unit NT-43F unit NT-42D unit NT-45D unit NT2-42D unit NT-42D unit NT-45D unit EZ-Connect Board and Wiring Harness A printed wire board that makes prototyping easy with the BL-4000 products Mounting holes for optics Build-in standard AMP connector Colour coded wiring harness available EZ-Connect Board EZ Atlas EZ-Connect Wiring Harness EZ-46WH Lighting Science Optics Produce homogeneous beam distributions Atlas optics are designed to attach to the EZ-Connect Board Titan optics are compatible with Lighting Science heatsinks Atlas Narrow Optic 17 with Holder for EZ-Connect Board Atlas Medium Optic 32 with Holder for EZ-Connect Board Atlas Wide Optic 38 with Holder for EZ-Connect Board Atlas Narrow Optic 17 with Holder for EZ-Connect Board Osram ORBEOS OLED Lighting ORBEOS Round OLED Lighting Tile, Diffused LumiDrives LED Drivers Multidriver 8 The Multidriver 8 is designed to drive up to 8 x 1W LEDs at 350mA or 6 x 3W at 700mA. EZ unit EZ-46WH unit OP-4LN unit OP-4FM unit OP-4FW unit OP-4LN unit Non-glaring uniform area light source Exceptionally thin 2.1mm Instant on/off High quality of light Colour Rendering Index: 75 Luminance: 1000 cd/m 2 Interconnect via 4 contact pads Light output area: Ø79mm Overall dimensions 90 x 90 x 2.1mm Applications include: embedded lighting in walls, windows, furniture, showcases, vehicles and products, mood and ambient lighting designs, general lighting and task lighting Note: Soldering and interconnection technologies which apply heat to the light output area are not recommended and may cause damage to the OLED. Type OLED Lighting Tile Depth 2.1 mm Colour Warm White Number Of Elements 1 Power Dissipation 0.71 W Oating Temature C 400 ma View Angle 120 Colour temature 2800 K Price a unit Colour Peak Power Wavelength Dissipation (W) (ma) Luminous Flux (lm) EZ-42D White EZ-42D Warm White EZ-43F Red / Green / Blue 629 / 535 / 470 nm 1.7 / 2.6 / / 142 / EZ-42D unit EZ-42D unit EZ-43F unit MLD8-C-35/ 70 V CC Features Price 230 Vac 8x1W 350/ 700mA a unit Visit our website for additional price information and exciting promotions 901

4 Microdriver The Microdriver 9 is suitable for driving up to 9 x 1W Luxeon LEDs at 350mA or 4 x 3W Luxeon LEDs at 700mA. The compact, low profile enclosures allow mounting alongside LEDs and arrays or remotely. Energy efficient switch mode power electronics Short and open circuit protected Low power oating mode Long life of up to 50,000 hours Output Current 350 ma Output Power W Output Voltage 4 15 V Features 4x1W 350mA Magtech LED Drivers LED Driver CC1512DP Series Compact size that maximises design flexibility Suitable for damp and dry locations High efficiency reduces total power consumption Tight regulated constant current output to maximise the LED formance Dimensions 1.79 x 1.34 x 0.75 Oating Voltage V dc in. Oating Temature C Type LED driver constant current Power Dissipation 24 W LED Driver with Dimming Control and 10Vdc Output DC to DC Constant Current Power Supply Wide input voltages from 11 40Vdc Waterproof Design - IP66, NEMA3 For Dry and Damp Locations Convection cooled in plastic housing Dimensions 56 x 35 x 23 mm Oating Temature C W 350mA Constant Current CC3512H W 1000mA Constant Current CC3512H OSRAM LED Drivers OPTOTRONIC OT18/ /700 Dimmable Electronically stabilised constant current LED power supply OPTOTRONIC OT6/ /24CE For installation in flush-type boxes. Protected against dust and moisture according to IP65 Wire type connection Input Voltage V ac Output Voltage 24 V Output Power (Max) 6 W Dimensions 51x50x22 mm Oating Temature C Microdriver 9 MDU-9-SC a unit Magtech Current Rating (ma) CC1512DP CC1512DP CC1512DP unit CC1512DP unit Input Voltage V ac Output Power (Max) 17 W Output Voltage 0-25 V dc Oating Temature C Output Current 700 ma Magtech CC3512H unit CC3512H unit OT18/ /700DIM a unit OT /24 CE unit Philips LED Drivers DMX Lighting Control ON-LINE Xitanium LED Drivers Outdoor, Constant Current, Gen-1 These constant current Xitanium LED drivers, from Philips Lighting, are designed to oate high brightness LED solutions and are suitable for outdoor applications, including: Channel letter/contour lighting, Architectural lighting, Retail/theme lighting, Orientation lighting (path lighting), Entertainment lighting, Emergency and security lighting. Compact size IP66 rated Long lifetime: 50,000+ hours Low temature formance: -40 C Type LED driver constant current Price Outdoor LED Driver IP66 12W 0.35A 33V Outdoor LED Driver IP66 17W 0.70A 24V Outdoor LED Driver IP66 40W 1.75A 24V Outdoor LED Driver IP66 67W 2.80A 24V Outdoor LED Driver IP66 80W 3.15A 24V Xitanium LED Drivers Indoor, Selectable Output Current These Xitanium electronic LED drivers are designed to oate LED solutions for general lighting applications. An adjustable output current enables flexibility in LED luminaire design.the series includes fixed-output and dimmable (trailing edge and Touch and DALI) versions. Mains AC input V Adjustable output current (AOC) Long lifetime: 50,000+ hours SELV (Safety Extra Low Voltage) output High efficiency Power factor range: 09 to 9.5 Wide oating temature Type Power Dissipation LED driver constant current 25 W Price Indoor LED Driver 25W A 36V Indoor LED Driver 25W A 36V DIM DMX 8-Output Relay Board The DMX relay board provides up to 8 digital outputs when connected to a DMX theatre control network. Base address may be set to between 1 and 505 The board requires a 12V DC supply at 0.5A Each relay is rated 10A at 240VAC Board dimensions: 125x138 mm (5in x 5.4in) DMX LED lit when a DMX signal is being received, flashing LED when no valid DMX signal stream is being received Price a unit DMX 512-Channel Controller a unit a unit a unit a unit a unit a unit a unit The TX512 transmitter is a full speed serial to DMX transmitter. The module will generate up to 512 DMX channels and accepts serial commands and data via an RS-232 serial connection - e.g. to a PC. The TX512 will store up to 60 scenes (at 128 channels scene) and scenes may be switched in by a single serial command or for scenes 1 through 8 by simple manual switches DMX Out: 5-pin XLR Female connector Power In: 2.1mm connector, centre positive. Requires 9VDC at 0.5A Serial In: 9600 or baud RS-232 DB9 connector Manual Scene select: DB15 connector, ground pin 1 through 8 for switching JP1 Comms baud rate select: 9.6kb jum out, 19.2kb jum in Price a unit OM = Order Multiple Indicates more pricing available online a New product to range

5 Aptina Image Sensors Colour Image Sensor CMOS type Sensor format 680H x 512V 1 4 inch VGA CMOS,Colour MT9V125IA7XTC inch WVGA CMOS,Colour MT9V126IA3XTC inch WVGA CMOS,Colour MT9V136C12STC ES inch VGA CMOS,Colour MT9M032C12STC inch WVGA CMOS,Colour MT9V024IA7XTC inch WVGA CMOS,Colour MT9V034C12STC inch CMOS,Colour MT9M131C12STC inch CMOS, FOV,Colour MT9T031C12STC inch CMOS,Colour MT9D131C12STC inch CMOS,Colour MT9J003I12STCU inch CMOS,Colour MT9P031I12STC Price 1 4 inch VGA CMOS,Colour a unit inch WVGA CMOS,Colour a unit inch WVGA CMOS,Colour a unit inch VGA CMOS,Colour a unit inch WVGA CMOS,Colour a unit inch WVGA CMOS,Colour a unit inch CMOS,Colour a unit inch CMOS, FOV,Colour a unit inch CMOS,Colour a unit inch CMOS,Colour a unit inch CMOS,Colour a unit Omnivision Image Sensors Camera Flex Module Evaluation Board with Camera Flex Module Digital evaluation board and flex camera module; board has USB 2.0 controller and a Molex connector for the camera module. For use with Windows XP (with service pack 2) Drivers can be downloaded from the Omnivision website Manu. Part OV Evaluation Kit with OV07670-MFSL ECJF Camera Module OV ECJF Evaluation Kit with OV09655-MFSL Camera Module Omnivision Sensor on-board colour camera and lens module designed for mobile applications. Proprietary sensor technology utilizes advance algorithms to cancel Fixed Pattern Noise, eliminate smearing, and drastically reduce blooming. The device can be programmed to provide image output in various fully processed and encoded formats. Serial Camera Control Bus (SCCB) interface Progressive scan mode Low power dissipation 2.5V oation Stable image oation: 0 to +50 C Fixed focus lens Function controls include; exposure control, gamma, gain, white balance, colour matrix, colour saturation, hue control, windowing Note: Recommended connector Resolution OV07670-MFSL 640 x 480 VGA Camera Flex Module OV09655-MFSL 1280 x MegaPixel SXGA Camera Flex Module OV07670-MFSL unit OV09655-MFSL unit Omnivision OV07670-ECJF unit OV09655-ECJF unit New products available online every week 903