CONTENT Multipurpose Drills MDT 60 B. MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0)
|
|
- Charleen Prudence Park
- 5 years ago
- Views:
Transcription
1 MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0) To the kind attention of: Mr. Robin North Date: SUBJECT: OFFER MDT Sales UK MDT60B quote Dear Sirs, Hereby we are pleased to provide you with our best offer for the multipurpose drill rig mod. MDT60B. The dressing offered is only for your initial evaluation. Other dressing can be provided. CONTENT Multipurpose Drills MDT 60 B 1
2 Quotation Image Multipurpose Drills MDT 60 B 2
3 Quotation Synthesis MDT 60 B Description Price The MDT 60 B is a powerful and very compact drill rig, developed especially for heavy site works, offers exceptional manoeuvrability, reliability and productivity, thanks to the adoption of many innovative technical solutions ,00 Download Technical Specs Download Catalogue GG50C Swivel joint Description Price Swivel joint is situated back to a floating stub-shaft of the rotary head, and is used for the low pressure fluid adduction up to 50 bar with a joint of 1 1/ ,00 TP1000 Remote Control Description Price Portable remote control console, with cable transmission (length 15m); it is supplied as an optional, as an alternative to radio control ,00 RFSM-1 Clamping limiting device Description Price The device permits to control hydraulically the maximum clamping force, avoiding rods or casing s lesions. The adjustment is for both clamps at the same time. 300,00 KBC Force Balancing Kit Description Price An hydraulic device to balance the thrust force for coring use 950,00 PDA60 Big foot Description Price Positioned on the bottom of the mast in order to give more stability at the mast in case of jet grouting treatment ,00 3
4 VE2000K Hydraulic winch Description Winch positioned on the top of the mast, with Pulling force 2000 dan GM240M Clamps Description The clamps unit is suitable for rods with diameter from 38 to 230 mm VA60I Hydraulic-control air/mud valve Description 2 Air/mud valve with a activated through hydraulic jack with electrohydraulic control. TR M Rotary head Description The Rotary head is equipped with two hydraulic orbital engines of double displacement. An electrical selector, situated on the remote control desk, allows to choose between maximum or minimum displacement OL60 Line Oiler Description Line lubrication device for the emission of nebulised oil into compressed air line. PAT Water pump Description Triplex high pressure water pump complete with filter on water inlet line for use as de-coring pump and for washing operation. Maximum flow rate: 15l/min Maximum pressure: 150bar Price 5.200,00 Price 8.250,00 Price 1.350,00 Price ,00 Price 3.300,00 Price 2.100,00 4
5 PG 1000 Protection Guard Description Price Fully compliant protection guard from entanglement 4.650,00 Total ,00 Discount 15% Total with Discount ,00 Extra Quote Rows GM355M Clamps Description Price Discount (%) Reducted price The clamps unit is suitable for rods with diameter from 48 to 340 mm 8.250,00 15% 7.012,50 Total 8.250,00 Total reduced extra quote cost 7.012,50 5
6 Conditions of Sale: Delivery: Ex Works Parma, Italy Lead Time: within 4 weeks after the down payment Validity: 30 days Color: Orange RAL 2004 Guarantee: One year from B/L Payment: Start Up: 20% at order time and remaining 80% by bank transfer before delivery 3 days of work of a MDT technician free of charge (board and lodging charged to the Customer). One week before delivery MDT is available to accommodate a Customer technician for a training on use and maintenance (accommodation is borne by MDT, the trip charged to the Customer) Mc DRILL TECHNOLOGY S.p.A. Anastasiya V. Mantsurova Area Manager tel cell a.mantsurova@mdtspa.it 6
7 Technical Description Multipurpose Drills : MDT 60 B The MDT 60 B is a powerful and very compact drill rig, developed especially for heavy site works, offers exceptional manoeuvrability, reliability and productivity, thanks to the adoption of many innovative technical solutions. The MDT 60 B rig was made for satisfying numerous demands in search of the right equipment that would permit to implement different works in reduced space conditions. So it became possible to carry out micropiles, tie rods and consolidation rods, by using jet grouting technologies as well. High extraction force that is not affected by any reduction in cue-lift thanks to the hydraulic piston. Mast vertical axis rotation system to drill in parallel position to the crawlers. Portable electric remote-control desk, that guarantees the maximum safety condition and comfort to the operator, during placement, working phases and moving; in particular when climbing and drifting down from the transport carriage on the road. Automatic power division system in order to improve the rig s performance and maintain the productivity at a high level. Automatic devices application makes easier the use of the rig itself also by less experienced personnel. Ample oversizing of structural parts taking in consideration possible critical conditions due to eventual operator s mistakes. The drilling machine meets the CE norms, especially the UNI EN 791. Even though the dimensions remain reduced, the possibility to install the engine of 102 hp with exceptional capacity permits to reach unequalled productivity levels. For high performance the rotary may be applied, with torque max. up to Nm, without decreasing significantly the 7
8 rotation speed. The articulation is based on parallelogram with mast lateral positioning system. Mast rotation is moved by two independent hydraulic cylinders equipped with control valves, it is possible to achieve a continuous mast rotation equal to 91,5 for each side to achieve an overall mast rotation equal to 183. A lateral swing allows positioning of the hole centre out of the track increasing a versatility of the drilling unit. Mast vertical axis rotation system to drill in parallel position to the crawlers allows to execute drilling works near the walls with the minimum crawler truck s movement. The substantial rigidity of the structure and of the joints, allows a precise positioning of the mast in addition to the drastic reduction of undesired movements due to the stresses during use rotary trolley speed and thrust force can be controlled independently. The mast, made of high yield point steel, is equipped with lateral guides made of special steel for the rotary head trolley sliding and for longitudinal movement of the mast itself allows as well a quick installation of the necessary accessories for grouting jetting. Hydraulic piston, installed inside, activates the jack chain of the rotary trolley developing maximum extraction force equal to 7 T. The trolley is equipped with a piston for the lateral displacement of rotary, letting free the borehole axis for the reinforcement insertion. 8
9 Accessories GG50C Swivel joint Swivel joint is situated back to a floating stub-shaft of the rotary head, and is used for the low pressure fluid adduction up to 50 bar with a joint of 1 1/2 Air/water adduction system is accomplished with 2 hoses of 1 ½ hrough the zinc-plated steel hose carrier along with the hydraulic hoses Maximum working pressure (bar) 50 Type of drilling fluid Air, water, foam, bentonite TP1000 Remote Control Portable remote control console, with cable transmission (length 15m); it is supplied as an alternative to radio control. Like the radio, TP1000 can be either worn by the operator by shoulder belt, or placed to the tripod support. 9
10 RFSM-1 Clamping limiting device The device permits to control hydraulically the maximum clamping force, avoiding rods or casing s lesions. The adjustment is for both clamps at the same time. KBC Force Balancing Kit An hydraulic device to balance the thrust force for coring use 10
11 PDA60 Big foot Positioned on the bottom of the mast in order to give more stability at the mast in case of jet grouting treatment. VE2000K Hydraulic winch The winch that is positioned on the top of the mast, is equipped with a transfer case and provided with pulley sheave made of special Teflon, mounted on the ball bearings. It also has one particular rope guiding device that in case of not perfectly aligned lifting, doesn t allow the rope to disentangle from the pulley, preserving it from early wearing and breaking. Besides, the VE2000K winch is provided with an anti-rotation rope and an adequate ballast to support a rope in tension when it is rewound without loading. The useful lifting height is approximately 7 m. This permits lifting of casing tubes. A speed control is proportional and is made with the help of specific manipulator that is positioned on the remote control console. Pulling force dan Drum capacity m 46 Rope speed m/min 46/60 11
12 GM240M Clamps The clamps unit is composed of two independent clamps, flanged in the base of the mast. Lower fixed clamp Top clamp provided with a breakout ram A special design of clamps prevents from material accumulation inside internal parts in order to avoid shutdowns and damages. Clamps are of the open type at the front to allow: rod installation jaw replacement movement of the rig away from the bore hole if the rod gets stuck in the hole Free passage diameter: mm 240 Clamping diameter (min-max): mm Clamping force: dan Break out torque: danm VA60I Hydraulic-control air/mud valve 2 Air/mud valve with a activated through hydraulic jack with electrohydraulic control. It is operated by a remote control and permits also a partial opening that allows a flow rate regulation. 12
13 TR M Rotary head The Rotary head is equipped with two hydraulic orbital engines of double displacement. An electrical selector, situated on the remote control desk, allows to choose between maximum or minimum displacement. A rotary stub-shaft has the 1 1/2 internal passage and finishes with a pin male thread of 2 3/8 A.P.I. R., and is characterised by the possibility of free or floating movement, useful for protecting rod threads during drilling manoeuvres. Water pump off Water pump on Torque max. Speed 1ª Nm Speed max. Speed 1ª rpm Torque max. Speed 2ª Nm Speed max. Speed 2ª rpm Torque max. Speed 3ª Nm Speed max. Speed 3ª rpm Torque max. Speed 4ª Nm Speed max. Speed 4ª rpm OL60 Line Oiler Line lubrication device for the emission of nebulised oil into compressed air line; including air valves, check (backflow) valve, oil flow regulator. 13
14 Capacity: l 8,5 Maximum operating pressure: bar 26 Maximum airflow: l/min PAT Water pump Triplex high pressure water pump complete with filter on water inlet line for use as de-coring pump and for washing operation The pump includes a water filter on the suction line. The pump is activated from the remote control panel. It can not be used for bentonite and abrasive fluids. Maximum flow rate: l/min 15 Maximum pressure: bar
CONTENT Vertical Drills MDT 80 V. MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0)
MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0) 1832273977 Robin@mdtsales.uk To the kind attention of: Mr. Robin North Date: 06 05 2015 SUBJECT: OFFER 2015-1470024 quote MDT Sales
More informationMDT 40 K. Multi-Use Drill Rig Model. Technical Description
Technical Description Multi-Use Drill Rig Model MDT 40 K The MDT 45 K model is positioned in the average-small size segment of the drill rigs. It was thought out especially for heavy works on the construction
More informationThe most complete line of drilling rigs...
PRODUCTS RANGE The most complete line of drilling rigs... MAIT, a world leader with more than 50 years experience in manufacturing hydraulic drilling rigs, presents its wide range of machines able to satisfy
More informationDANDO MULTITEC 4000 MK3
DANDO MULTITEC 4000 MK3 Multipurpose Drilling Rig WWW.DANDO.CO.UK Multitec 4000 Features 4 speed rotary head mounted to a hydraulic side shift with optional floating spindle. Hydraulic head tilt available.
More informationEK60 MULTI-PURPOSE PILING RIG
MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG The GEAX EK60 is a multi-purpose piling rig designed to achieve the highest levels of versatility, manoeuvrability, ease of use, transportation, production
More informationP.12 P.23 P.24 P.26 DRILLING RIGS AND ACCESSORIES
DRILLING RIGS AND ACCESSORIES P.12 HEAVY DYNAMIC PENETROMETER AND DRILLING RIGS APAFOR APAFOR 50 APAFOR 100 APAFOR 200 APAFOR 220 APAFOR 330 AND 340 APAFOR 430 APAFOR 450 RS APAFOR 450 APAFOR 550 AND 560
More informationExplorac 100 Reverse circulation drill rig for exploration drilling
Explorac 100 Reverse circulation drill rig for exploration drilling Hole diameter: 127 165 mm (5" 6.5") Fast and accurate Reverse circulation (RC) drilling represents a fast and economical way to retrieve
More informationEK40 MULTI-PURPOSE PILING RIG
MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG The GEAX EK40 is a multi-purpose piling rig designed to achieve the highest levels of versatility, manoeuvrability, ease of use, transportation, production
More informationEK90 GEAX MULTI-PURPOSE PILING RIG
EK90 EK90 The EK90 is a multi-purpose piling rig designed to achieve the highest levels of versatility, ease of use, manoeuvrability, transportation, production and reliability. It is configured to operate
More informationDeltaBase 540 Technical Data Sheet
Release Date: May 10th, 2008 Page 1 of 7 PRODUCT OVERVIEW The DeltaBase 540 is a powerful and versatile Multipurpose drill rig. With the ability to perform coring, DTH drilling, rotary flush, auger drilling
More informationEVERDIGM EXPLORATION DRILL RIGS CORE DRILL RIGS
EVERDIGM EXPLORATION DRILL RIGS CORE DRILL RIGS EVERDIGM CORE DRILL RIGS CROWN BLOCK UPPER HOIST LIMIT (OPTIONAL) UPPER MAST ROD KICKER LOWER MAST HYDRAULIC OIL TANK CONTROL PANEL POWER UNIT ROTARY HEAD
More informationCORE DRILL RIGS EVERDIGM EVERLASTING PARADIGM TOTAL SOLUTION PROVIDER CREATING MORE VALUE FOR FUTURE GENERATION EVERDIGM EXPLORATION DRILL RIGS
EVERDIGM EVERLASTING PARADIGM EVERDIGM is large sized company with $300M turnover manufacturing high-end Construction, Mining, and Special Purpose Vehicle in Korea. The products have been globally distributed
More informationEN TRA ENGINEERING AND TRADING SRL
Foundation Equipment Grabs for diaphragm wall and piling Hydraulic Casing oscillators Power Packs Casing joints Stop-end pipes Water stop elements Hydraulic extractors Piling tools and accessories MADE
More informationDando Drilling International
Dando Drilling International Dando Terrier MK2 The new compact, versatile Dando Terrier MK2 has been designed specifically for sampling and testing for site investigation and environmental analysis. Crawler
More informationAF 125 HYDRAULIC DRILL RIG
AF 125 HYDRAULIC DRILL RIG AF 125 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 125 is a very reliable machine that has been created for customers who want a smallsized machine with low dimensions
More informationDRILLING RIGS SINCE 1964 EXPLORATION SERIES
DRILLING RIGS SINCE 1964 EXPLORATION SERIES EXPLORATION XL 2 Designed To Find Ores Deposits Easily, Cheaply And Quickly. The EXPLORATION drilling rigs series is the newest technical solution for all exploration
More informationDYNATECH INDUSTRIES PVT LTD
DYNATECH INDUSTRIES PVT LTD CD SERIES Heavy Duty Diamond core Drill MODEL CD75 TECHNICAL SPECIFICATIONS Product Introduction DynatechIndustriesCoreDrill- CD75 is a versatile heavy duty Hydraulic Diamond
More informationExcellence for Drilling EXPLORATION SERIES.
Excellence for Drilling EXPLORATION SERIES www.fraste.com EXPLORATION SERIES New series of EXPLORATION drilling rigs that are newly designed to increase the exploration drilling rate, combine several systems
More informationAccessories: Dust collector. Slope winch. Bit grinder Application: Water wells
Deltabase 430 - DTH drill rig Deltabase 430 - DTH drill rig Deltabase 430 is a compact, lightweight drill rig especially designed for DTH work on modern job sites. The DB 430 is optimised to drill 4 to
More informationAF 125 HYDRAULIC DRILL RIG. Courtesy of Crane.Market
AF 125 HYDRAULIC DRILL RIG AF 125 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 125 is a very reliable machine that has been created for customers who want a smallsized machine with low dimensions
More informationHYDX-5A Full Hydraulic Drilling Rig
HYDX-5A Full Hydraulic Drilling Rig I. General Introduction The HYDX-5A new model Full Hydraulic Core Drill Rig is developed by Lianyungang Huanghai Machinery Co., Ltd. with reference of advanced technique
More informationEK90 GEAX MULTI-PURPOSE DRILLING RIG
www.geax.it EK90 EK90 is a multi-purpose drilling machine designed to reach the highest grade of versatility, ease of use, easy transportation, working speed and low maintenance. It can work with different
More informationCH 450. High Tech Line. Self-Erecting Hydraulic Piling Rig
CH 450 High Tech Line Self-Erecting Hydraulic Piling Rig CH 450 MULTIPURPOSE HYDRAULIC RIGS FOR DIFFERENT DRILLING TECHNOLOGIES. The winning solution for job sites that require fast operating times. Truly
More informationThe product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
More informationFOUNDATION EQUIPMENT THE RANGE OF OUR PRODUCTS
FOUNDATION EQUIPMENT THE RANGE OF OUR PRODUCTS HYDRAULIC PILING RIGS XP SERIES The new line of high performance products featuring state-of-the-art technology and operational competitiveness. The XP series
More informationAdvanced Foundation Technology and Equipment
Advanced Foundation Technology and Equipment Tel. 0039 0421 325077-8 - Fax 0039 0421 325079 e-mail: ncb1@dacos.it URL: www.ncbinternational.net FOUNDATION EQUIPMENT Pile & Micro-Pile Hydraulic Rotary Rigs
More informationValueLine. BAUER BG 26 Rotary Drilling Rig Base Carrier BT 70
BAUER Rotary Drilling Rig Base Carrier BT 7 The BAUER BG The BG Perfection is achieved when there is nothing left to take away. Drilling uncased deep boreholes stabilized by drilling fluid, or drilling
More informationSheave head. Auxiliary winch. Leader
Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace
More informationDYNATECH INDUSTRIES PVT LTD
DYNATECH INDUSTRIES PVT LTD MCD SERIES Mobile core Drill MODEL MCD40 TECHNICAL SPECIFICATIONS Product Introduction DynatechIndustries MobileCoreDrill- MCD40 is a Underground versatile Tyre Version heavy
More informationПК _02 FOUNDATION EQUIPMENT. casagrande
ПК 11-1121 _02 FOUNDATION EQUIPMENT casagrande »A Malignant, / -.ид?,* с-, Itafy 0ntanafreMa < p N) 'ISO 9001:1994 Macchinari per fondazioni. Implant/per centrifugal!. ovndafign equipment. M&c/ifnery and
More informationTB2150 HYDRAULIC EXCAVATOR. Operating Weight: 15,095 kg. From World First to World Leader
HYDRAULIC EXCAVATOR TB2150 From World First to World Leader Operating Weight: 15,095 kg Product Features & Specifications ENGINE - EU Stage IV / EPA Tier 4 Emission Compliant - DOC+SCR Exhaust After Treatment
More informationCH 650. High Tech Line. Self-Erecting Hydraulic Piling Rig
CH 650 High Tech Line Self-Erecting Hydraulic Piling Rig CH 650 The Comacchio self-erecting rigs are available in CPD (Cilynder Pull Down) and WPD (Winch Pull Down) versions and both are designed for easy
More informationTB290 HYDRAULIC EXCAVATOR. Operating Weight: 8,400 kg. From World First to World Leader
HYDRAULIC EXCAVATOR TB290 From World First to World Leader Operating Weight: 8,400 kg Product Features ENGINE - EU Stage III B / EPA Tier 4 Emission Compliant - Turbocharged - DOC Exhaust After Treatment
More informationHPM 250 DRILLING RIG PRESENTATION HPM 250. HPM 250 Short Mast
HPM 250 HPM 250 DRILLING RIG PRESENTATION Hpm 250 machine was designed to perform large diameters piling, also on lands particularly challenging. 3000 10 ft Even if It has remarkable performances, also
More informationLubrication equipment
Made In Italy Lubrication equipment PRODUCTS CATALOGUE GREASE DISTRIBUTION page 2 OIL DISTRIBUTION page 38 EXHAUSTED OIL ASPIRATORS page 112 TROLLEYS FOR DRUMS TRANSPORT page 118 OIL DRAIN UNITS page 134
More informationSHACK MOUNTED DRILL RIG VD8000
SHACK MOUNTED DRILL RIG VD8000 STANDARD TECHNICAL SPECIFICATIONS Model Type VD8000 Skid mounted, enclosed shack, all hydraulic chuck drive core drill, specially designed for diamond core drilling up to
More informationHorizontal Directional Drilling Rigs t
Made in Germany Horizontal Directional Drilling Rigs 30-100 t HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialised in Horizontal
More informationDrilling Rig LB LB Courtesy of Crane.Market
Drilling Rig LB 36-41 EN LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationAF 130 HYDRAULIC DRILL RIG
AF 130 HYDRAULIC DRILL RIG AF 130 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 130 is a machine that satisfies the need for high productivity when carrying out piles of medium diameter and
More informationDrilling Rig LB LB
Drilling Rig LB 28-32 EN LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationMicropiles are often used
16 PILING & FOUNDATIONS Downsizing Micropiles, also known as minipiles, are the main choice of foundation system for many ground-engineering projects. GDI talks to piling-rig manufacturers about the technology
More informationAutomatic Island Model "DA 2500" built for the casting gravity of aluminum parts.
Automatic Island Model "DA 2500" built for the casting gravity of aluminum parts. 1 Gravity die casting Machine DA 2500 FR 8 Safety photocell and panel casting area 2 Manipulator load sand core 9 Safety
More informationRC DRILLING DEPTH GUIDELINES DRILL ROD / CORE BARREL. Hole Depth METRIC. Hole Depth U.S. 4 (101,6 mm) 700 m ft. 4-1/2 (114,3 mm) 600 m 1.
Drilling depth capacity s are based on feedback from field operatives and can be reasonably expected with vertical, water filled holes, by well-trained drilling crew using high quality drilling tools.
More informationHYTECH ENGINEERING & SERVICES
Products About us Hytech Engineering & Services specializes in the operations and maintenance, modifications, procurement, development, and manufacturing of customized hydraulic and automated products
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation
More informationCH 650. Self-Erecting Hydraulic Piling Rig. High Tech Line
CH 650 Self-Erecting Hydraulic Piling Rig High Tech Line CH 650 The Comacchio self-erecting rigs are available in CPD (Cilynder Pull Down) and WPD (Winch Pull Down) versions and both are designed for easy
More informationWP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components
WP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components Drilling Rig Equipment & Components Mud Pump and Spare Parts Travelling Blocks Hooks Block Hook Units Swivels Rotary Tables WP Petroleum
More informationD-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone:
Power Source: Gasoline or Diesel Engine Maximum Gross Spindle Torque: 2320 ft. lbs. (3145 Nm) to 3066 ft. lbs. (4156 Nm) Spindle Bore: 2-3/8 (60mm) Spindle Travel: 66 (1,676mm) Spindle & Retract Force
More informationLX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.
LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview LX 4 GEO-TECHNICAL DRILL HIGH DRILLING POWER IN A SMALL PACKAGE, THE MULTIPURPOSE LX 4 IS AN ESSENTIAL TOOL ON TODAY'S JOB SITE Power and Versatility
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 1 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Leader Rope guide Leader ball joint Radius adjustment device Boom Pile
More informationAF 300 HYDRAULIC DRILL RIG
AF 300 HYDRAULIC DRILL RIG IMT International S.p.A. was founded in 1974 by Mr. Giulio Accorroni. Since then, the Company has concentrated on the acquisition of specific know-how for the planning and construction
More informationTechnical data Hydraulic crawler crane HS 8040 HD
Technical data Hydraulic crawler crane HS 8040 HD Dimensions Basic machine with undercarriage 2860 7350 3000 1700 1060 3300 1200 2340 4610 5460 R = 3900 700 4200 310 4200 990 11240 Operating weight The
More informationDrilling Rig LB enus LB
Drilling Rig LB 36-41 enus LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationPlug & Abandonment Light Drilling Workover Well Intervention
Plug & Abandonment Light Drilling Workover Well Intervention Small foot print Light weight Modular High capacity Cantilever based or Single lift to platform CANTILEVER PACKAGE SPECIFICATIONS TOP DRIVE
More informationHorizontal Directional Drilling Rigs t
Made in Germany Horizontal Directional Drilling Rigs 150-600 t HDD-Rigs 1,500 kn - 6,000 kn pull force (150 t - 600 t) 70 knm - 180 knm torque Horizontal Directional Drilling Rig, Frame Version the low
More informationPiling and drilling rig LRB Courtesy of Machine.Market
Piling and drilling rig LRB 16 EN 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.5 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationDrilling Rig LB enus LB
Drilling Rig LB 44-51 enus LB 26.5 Concept and characteristics Leader top for Kelly rope (drilling axis - 4.6 ft) Leader top for auxiliary rope Kelly rope Kelly Inclination device Crowd winch Rotary (drilling
More informationTechcrane International, LLC
We are pleased to present our quotation for API Monogrammed EBI Crane Model TC150-56-100: Certification And Accreditation The crane quoted herein is designed and manufactured in accordance with all structural
More informationTechnical Specification HY76 Build 1999, Working hour 12127, Mileage km according to counters.
Technical Specification HY76 Build 1999, Working hour 12127, Mileage 33250 km according to counters. Drilling equipment for vertical drilling by use of cable tool percussion, direct mud circulation, reverse
More informationfor U Sheet Piles 400mm wide
for U Sheet Piles 400mm wide Extremely sophisticated modular model applicable to U Sheet Piles (400mm wide) 2 Features of Silent Piler F Series (New Standards of Press-in Machine) Silent Piler Flexible
More informationBG 25C Rotary Drilling Rig Base Carrier BH 70 BH 70
BG 25C Rotary Drilling Rig Base Carrier BH 70 BH 70 Dimensions Crowd winch type The BG 25C rotary drilling rig has an operating weight of approx. 74 to and a torque of 245 knm. It is ideally suited for:
More informationDrilling Rig LB enus LB
Drilling Rig LB 28-32 enus LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationSRD 5C & 6C Series Diamond Drill Rigs
SRD 5C & 6C Series Diamond Drill Rigs About Us Solid Rigs is a drill rig and drilling tools manufacturer, that has been producing drill rigs and drilling tools for both the Civil and Mining industries
More informationConstruction Machine HS 8300 HD. enus HS
Construction Machine HS 8300 HD enus HS 8008.01 Dimensions Basic machine with undercarriage R 35 11 12 43 8 13 11 11 7 10 7 2 19 6 7 3 26 31 4 12 8 9 11 47.2 22 8 27 1 25.2 71 R 25 8 Operating weight The
More informationElectric Lift - Universal Drum Rotator STE01-DRU01
Universal Drum Trolley Electric Lift - Universal Drum Rotator STE01-DRU01 Technical specification: safe working load (SWL) 350kg; weight 310kg; lift stroke 1600mm; lowered height 1980mm; length 1660mm;
More informationTechnical data Drilling rig LB 24
Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Kelly bar Inclination device
More informationTorque Sensors, Torque Transducers
Torque Sensors, Torque Transducers Rotating with Slipring DR-2 1..500 0.1 - Cylindrical Shaft with Keyway DR-20 1..500 0.1 Standard Cylindrical Shaft with Keyway Sensors for Screw Driving Systems DR-1
More informationTR SERIES LŌDRIL LAD SERIES AERA. Foundation Drilling Equipment Manufacturing
1 TR SERIES LŌDRIL LAD SERIES AERA Foundation Drilling Equipment Manufacturing 2 3 TABLE OF CONTENTS ABOUT THE COMPANY... 4 TR SERIES... 6 LŌDRIL... 12 LAD SERIES... 18 AERA... 22 4 99% OF OUR CUSTOM-
More informationOPERATING WEIGHT kg ENGINE POWER 15,7 kw / 21, rpm BUCKET CAPACITY 0,035-0,085 m3 PC20MR-2 20MR-2 MINI-EXCAVATOR PC20MR-2
OPERATING WEIGHT 2.140-2.610 kg ENGINE POWER 15,7 kw / 21,1 HP @ 2.500 rpm BUCKET CAPACITY 0,035-0,085 m3 PC 20MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation The new compact mini-excavator is
More informationALWAYS READY FOR YOUR BUSINESS MECHANICAL DRILLING RIG EQUIPMENT
ALWAYS READY FOR YOUR BUSINESS MECHANICAL DRILLING RIG EQUIPMENT Bentec rigs and drilling rig equipment Bentec branches BENTEC Advanced Technology for comprehensive drilling solutions. With years of experience,
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 100 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Rope guide Leader ball joint Boom Leader Radius adjustment device
More informationOPERATING WEIGHT kg NET POWER 19 kw / 25, rpm BUCKET CAPACITY 0,045-0,105 m3 PC27MR-2 27MR-2. Mini-Excavator PC27MR-2
PC27MR-2 OPERATING WEIGHT 2.880-3.335 kg NET POWER 19 kw / 25,5 HP @ 2.600 rpm BUCKET CAPACITY 0,045-0,105 m3 PC 27MR-2 Mini-Excavator PC27MR-2 PC27MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation
More informationHydraulic Hammers Leaders - Accessories
Hydraulic Hammers Leaders - Accessories - The specialist for Hydraulic Pile-Driving Innovation - Time proven design - Environmental sensitivity Fambo is a technology orientated company, specialized in
More informationE08 - E10. Compact Excavators
E08 - E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationHH102. Hydraulic with Caterpillar engine, for drilling oil and gas wells up to 2,000 m. 100 tf hook capacity HP triplex pumps.
HH 102 DRILLING RIG HH102 Hydraulic with Caterpillar engine, for drilling oil and gas wells up to 2,000 m 100 tf hook capacity 1000 HP triplex pumps Mongoose shakers Design and basic rig designed in accordance
More informationCatalogue. Mühlhäuser - Obermann GmbH. In den Dorfwiesen Michelstadt/Germany. Phone Fax
Catalogue Mühlhäuser - Obermann GmbH In den Dorfwiesen 23 64720 Michelstadt/Germany Phone +49 6061 7009 0 Fax +49 6061 7009 70 e-mail: info@obermann.com Product range/ contents Page Grout pumps and dosing
More informationFront mechanical suspensions
FRONT MECHANICAL SUSPENSIONS 9 PRINT 603.43.351/D Front mechanical suspensions Page DESCRIPTION... 11 ARTICULATED QUADRILATERAL SUSPENSION WITH TRANSVERSE LEAF SPRING... 11 SPECIFICATIONS AND DATA... 12
More informationSheave head. Auxiliary winch. Leader. Leader support arm. Support arm brace. Leader swing device. Basic machine
Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace
More informationSOILMEC FAR EAST PTE.LTD SOILMEC ARABIA LLC
Microdrilling Microdrilling EQUIPMENT / TECHNOLOGIES PSM-8 PSM-8B PSM-8G STM-8G SM-14 PSM-16G STM-16G MICROPILES ANCHORINGS JET GROUTING OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT
More informationOPERATING WEIGHT kg NET POWER 21,7 kw / rpm BUCKET CAPACITY 0,035-0,13 m3 PC35MR-2 35MR-2. Mini-Excavator PC35MR-2
PC35MR-2 OPERATING WEIGHT 3.580-4.025 kg NET POWER 21,7 kw 29 HP @ 2.400 rpm BUCKET CAPACITY 0,035-0,13 m3 PC 35MR-2 Mini-Excavator PC35MR-2 PC35MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation
More informationOPERATING WEIGHT kg NET POWER 20,6 kw / 27, rpm BUCKET CAPACITY 0,035-0,13 m3 PC30MR-2 30MR-2. Mini-Excavator PC30MR-2
PC30MR-2 OPERATING WEIGHT 2.990-3.465 kg NET POWER 20,6 kw 27,6 HP @ 2.500 rpm BUCKET CAPACITY 0,035-0,13 m3 PC 30MR-2 Mini-Excavator PC30MR-2 PC30MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation
More informationTB280FR HYDRAULIC EXCAVATOR. Operating Weight: 8,500 kg. From World First to World Leader
HYDRAULIC EXCAVATOR TB280FR From World First to World Leader Operating Weight: 8,500 kg Product Features & Specifications ENGINE - EU Stage III B / EPA Tier 4 Emission Compliant - Turbocharged - DPF Exhaust
More informationTB240 COMPACT EXCAVATOR. Operating Weight: 4,070 kg. From World First to World Leader
COMPACT EXCAVATOR TB240 From World First to World Leader Operating Weight: 4,070 kg Product Features & Specifications ENGINE - Machine Models 124000003 or Later: EU Stage III A / EPA Tier 4 Emission Compliant
More informationDRILLING DEPTH GUIDELINES DRILL ROD Hole Depth METRIC Hole Depth U.S. Width mm 7,5 ft. Height mm 11,9 ft
DRILLING DEPTH GUIDELINES DRILL ROD Hole Depth Hole Depth 76 mm 280 m 918 ft BASE FRAME ASSEMBLY / UNDERCARRIAGE Weight of the Rig 12.600 kg 27.778 lb Length 7.100 mm 23,3 ft Width 2.300 mm 7,5 ft Height
More informationWASTE OIL EQUIPMENT MADE IN ITALY
WASTE OIL EQUIPMENT MADE IN ITALY WASTE OIL DRAINERS art. 0E42049 Kit for collecting waste oil made up of trolley for trade drums 20/60 Kg (art. 0E80050), and collecting bowl, without funnel. m 3 0,115
More informationConstruction Machine HS 8130 HD. enus HS
Construction Machine HS 8130 HD enus HS 8005.01 Dimensions Basic machine with standard undercarriage 10 11 32 4 17 3 88.6 63 13 59 18 8 11 39.4 12.6 22 1 20 3 54.3 7 R 18 1 17 11 46 3 Operating weight
More informationMH 20/25-4 T. Buggie. Nominal capacity 2000 kg and 2500 kg. Overall height: less than 2 metres
MH 20/25-4 T Buggie Nominal capacity 2000 kg and 2500 kg Overall height: less than 2 metres Kubota motor engine 4 cylinders : 60 HP/44 kw (EURO III) Hydrostatic transmission MH 20/MH 25-4 T Buggie, With
More informationTechnical data Hydraulic crawler crane HS 835 HD
Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating
More informationSparta Engineering Inc. Catalogue
2013 Sparta Engineering Inc. Catalogue Truck Mounted Single Service Rig TMS69-120 API 4f 3rd Edition Yes** Period One legal Yes** Rig Weights (Fully Dressed) Front: 16,800 kg. Rear: 24,000 kg** Capacity
More information75R-2 PC75R-2 PC75R-2. NET HORSEPOWER SAE J kw - 68 HP M IDI EXCAVATOR. OPERATING WEIGHT From kg to kg
PC 75R-2 PC75R-2 PC75R-2 NET HORSEPOWER SE J1349 50 kw - 68 HP OPERTING WEIGHT From 7.160 kg to 7.950 kg THE LTERNTIVE DIMENSION Especially designed for applications that require compact machines with
More informationTECHNICAL MANUAL UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR
*TM 5-3820-256-24P-3 TECHNICAL MANUAL UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600-FOOT
More informationVersions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP
Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialized in Horizontal
More informationED5800H SPECIFICATION
SPEC.F5-3713E ED5800H Hydraulic Earth Drilling Rig SPECIFICATION March, 2011 Nagoya, Japan Tel : 81- (52) - 623-3529 Fax: 81- (52) - 623-4349 Due to company policy of continuous development and improvement,
More informationWALKING PAD TELEMAST RIG
WALKING PAD TELEMAST RIG The Dawn of a New Era Power To Go, Faster With over a decade of proven reliability and more than 200 patented Telemast rigs in operation around the world today, a new era begins
More informationfor U Sheet Piles 400mm wide
for U Sheet Piles 400mm wide Extremely sophisticated modular model applicable to U Sheet Piles (400mm wide) 2 Features of Silent Piler F Series (New Standards of Press-in Machine) Silent Piler Flexible
More informationMOBILE CRANE BRANCH OF ZOOMLION GROUP
QUY0 SPECIFICATIONS MOBILE CRANE BRANCH OF ZOOMLION GROUP -1- Content 1. Overall dimensions and main specifications 1.1 Overall dimensions and working weight of main machine with basic 1.2 Overall dimensions
More information20R-8 PC20R-8 PC20R-8. NET POWER SAE J ,4 kw - 23,3 HP M INI-EXCAVATOR. OPERATING WEIGHT From kg to kg
PC 20R-8 NET PWER SAE J1349 17,4 kw - 23,3 HP PERATING WEIGHT From 2.535 kg to 2.675 kg SHAPING TECHNLGY Fruit of KMATSU technology and experience, the miniexcavator responds perfectly to all requirements
More informationINSPECTION FORM. Percuss. hours 1109* Shut down of suction for water holes x Water injector SanRemo. See report for more information
1 (1) - Sandvik Surface TH/DTH Drills equipment Brand Ingersoll Rand Type CM780D Inspector Inspection date 7 April 016 Manufacture year Serial number USSG78379M Q Engine hours 6930 Percuss. hours 1109*
More informationDeltaBase 102 Technical Data Sheet
Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key
More informationMid-Size. Horizontal Directional Drills DD-110 / 110S DD-155T DD-220T
Mid-Size Horizontal Directional Drills DD-110 / 110S DD-220T DD-110/DD-110S Horizontal Directional Drill Quiet Pak Noise reduction system Rack and Pinion design is a field-proven feature that maximizes
More information