Normalde Kapalı kontakt

Size: px

Start display at page:

Download "Normalde Kapalı kontakt"

Aubrie Norris
5 years ago
Views:

Normalde Kapalı kontakt Use Mineral oils-fuels-water Fixing Aluminum Anodized 1"Gas P31100-100 Stem Brass P31-100 Float Foamed nylon P31200-100 Seeger Phosphorous bronze P31250-100 O-Ring NBR P31-100

1 Normalde Kapalı kontakt Use Mineral oils-fuels-water Fixing Aluminum Anodized 1"Gas P Stem Brass P Float Foamed nylon P Seeger Phosphorous bronze P O-Ring NBR P Electrical connection Connector DIN P Type of contact Reed N.O./N.C.(SPDT) P Max switch capacity 80 W (50 w SPDT) P Max switch current 1 A (1 A SPDT) P Max switch voltage 250 Vac (220 Vac SPDT) Fluid speciﬁc weight 0,75 P Working temperature 15'C / +80 'C P gr (for L= 100mm.) P (Normaly closed) Normalde Açık/Kapalı kontakt 3c 2NC 1NO (Normaly open & closed) P P P P P P The contact can be converted from N.C to N.O by rotating the ﬂoat upside down For customized version (length, temperature / 80'C, etc) please contact Euro switch For a correct use please nefer to "General Notes" in the Euro switch sensors catalogue, edition 10/2008. SPDT Contact

Mod.41V Diaghragm pressure switch, screw terminals Zinc plated steel or brass (on request inox) Electric contacts Electric condition Silver Agni, on reguest goid plated N.O (bordeaux) or N.C.

(see page 87) With cap 3900001 IP 65 (see page 87) In accordance with EN 60730-I Insert diaphragm code (see page 86) 1 NBR- 2 FKM (viton)-3 EPDM CH-4 CR- 5 Silicone- 6 HNBR 75 gr -Part No.

2 Mod.41V Diaghragm pressure switch, screw terminals Zinc plated steel or brass (on request inox) Electric contacts Electric condition Silver Agni, on reguest goid plated N.O (bordeaux) or N.C.(blue) 48 V (250 V on request) Max switched current 0,5 A Max ﬂuid temparature 80 a 120'C depending on diaphragm 10 6 operations Electrical working life 10 6 operations IP 00 With cover 3001 IP 54 (see page 87) With cap IP 65 (see page 87) In accordance with EN I Insert diaphragm code (see page 86) 1 NBR- 2 FKM (viton)-3 EPDM CH-4 CR- 5 Silicone- 6 HNBR 75 gr -Part No. Zinc plated steel case Norm.open Norm.closed Thread 41V V /4"gas conico- conıcal 41V V V V /4"gas conico- conıcal 41V V V V /4"gas conico- conıcal Tercih edilen Ürün ları Ayarlabilir basınç 41V NO V NO V NO V NC V NC V NC N.O G1/8" 41V N.O G1/8" 41V N.O G1/8 " termostat sw. T60 DT10 G3/8" Setting Tollerance range at 20'C , Massima pressione statica- Max static presure

3 Mod.40 Piston pressure switch 48V Electric contacts Electric condition Zinc plated steel Silver Agni, on reguest goid plated N.O (bordeaux) or N.C.(blue) 48 V Max switched current 0,5 A Max ﬂuid temparature 100'C 10 5 operations (10- ) Electrical working life 10 5 operations IP 00 With cover 3001 IP 54 (see page 87) With cap IP 65 (see page 87) With connector IP 65 (see page 87) In accordance with EN I O-Ring NBR+Teﬂon Piston AISI gr -Part Number - Thread norm.open norm.closed M101 conico-conical H H 1 6 1/4" cilindrico-cylindrical H H 1 7 M101 conico-conical 1/4" cilindrico-cylindrical 600 Setting Tolerance range at 20'C Massima pressione statice-max static pressure Tercih edilen Ürün ları Fixed basınç aralığı 40 10H17 NO H17 NC 100-

Pressure switch with SPDT contacts Threaded ﬁtting Zinc plated steel (on request stainless steel) 250 Vac Max switched current 5 (1) A 80 to 120 C depending on diaphragm 106 diaphragm version 105

depending of setting value ~ 190 gr Membrana diaphragm Pistone piston Tollerance at 20o C Max Overpressure limit Max Working pressure 0,3-5 1-10 10-25 25-80 50-200 100-400 ± 0,15 ± 0,5 ±1 ± 2,5 ± 2

4 Pressure switch with SPDT contacts Threaded ﬁtting Zinc plated steel (on request stainless steel) 250 Vac Max switched current 5 (1) A 80 to 120 C depending on diaphragm 106 diaphragm version 105 piston version With connector according to UNI EN (DIN43650) Fixed Hysteresis diaphragm Approximately 10 30% depending of setting value Fixed Hysteresis piston approximately 10 40% depending of setting value ~ 190 gr Membrana diaphragm Pistone piston Tollerance at 20o C Max Overpressure limit Max Working pressure 0, ± 0,15 ± 0,5 ±1 ± 2,5 ± 2 10 ± Threads (X3) 1 1/8" Gas Conico 2 1/4" Gas conical 6 1/4" Gas cylindrical G 1/8" Gas cylindrical L L G 1/4 30- L Diaphragms / Seal materials 1 NBR 2 FKM (standard) 3 EPDM CH 4 CR 5 Sylicon 6 HNBR

F Pressure switch with SPDT contacts - female thread Threaded ﬁtting Zinc plated steel (on request stainless steel) 250 Vac Max switched

(DIN43650) Fixed Hysteresis diaphragm Approximately 10 30% depending of setting value Fixed Hysteresis piston approximately 10 40% depending

25-80 50-200 100-400 ± 0,15 ± 0,5 ±1 ± 2,5 ± 2 10 ± 3 15 F 0 0 0 0 1 F 0 0 0 0 2 F 0 0 0 0 3 F 0 0 0 0 4 F 0 0 0 1 5 F 0 0 0 1 6 Threads

5 F Pressure switch with SPDT contacts - female thread Threaded ﬁtting Zinc plated steel (on request stainless steel) 250 Vac Max switched current 5 (1) A 80 to 120 C depending on diaphragm 106 diaphragm version 105 piston version With connector according to UNI EN (DIN43650) Fixed Hysteresis diaphragm Approximately 10 30% depending of setting value Fixed Hysteresis piston approximately 10 40% depending of setting value ~ 265 gr Membrana diaphragm Pistone piston Tollerance at 20o C Max Overpressure limit Max Working pressure 0, ± 0,15 ± 0,5 ±1 ± 2,5 ± 2 10 ± 3 15 F F F F F F Threads (X3) 6 1/4" Gas cylindrical G 1/8" Gas cylindrical Diaphragms / Seal materials 1 NBR 2 FKM (standard) 3 EPDM CH 4 CR 5 Sylicon F G 1/4 M 30-6 HNBR

682 Pressure switch with settings visual scale Threaded ﬁtting Brass Label Optical polycarbonate Electrical connection Connector DIN43650-C int-9,4 Type of contact Reed SPST NO Max switch voltage 48V

6 682 Pressure switch with settings visual scale Threaded ﬁtting Brass Label Optical polycarbonate Electrical connection Connector DIN43650-C int-9,4 Type of contact Reed SPST NO Max switch voltage 48V 0,5A Max switch current Max switch capacity 10W 60 C Mech. and electrical working life 106 IP40 Thightening torque Nm ~ 105 gr Thread 1/8" Gas conical 1-6 Max Overpressure Limit pnö.sw. G 1/8 1-6

Manifold connection - G 1/4 F with connector according to UNI EN 175301-803 (DIN43650) Seal NBR+Teﬂon 460 gr (Approximately) Supplied with

7 692 Piston pressure switch with adjusting knob Electric contacts SPDT Silver 100 C Electrical characteristics 5 (4) A / 14 Vdc 4 (3) A / 30 Vdc 5 (3) A / 125 Vac 5 (1) A / 250 Vac Fixed hystereis approximately 10% of setting value External pollution situation 106 operations Fixing Manifold connection - G 1/4 F with connector according to UNI EN (DIN43650) Seal NBR+Teﬂon 460 gr (Approximately) Supplied with gasket and ﬁxing screws Tollerance ± 2% Max Overpressure Limit 900 ± 2% hyd.sw. G 1/

Pressure switches hex 24

Pressure switches hex 24 Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point