NOTICE. The Description and Illustrations in this Parts. Catalogue may not necessarily match with the. appearance of the actual Parts. Escorts Ltd.

Transcription

1

2 NOTICE The Description and Illustrations in this Parts Catalogue may not necessarily match with the appearance of the actual Parts. Escorts Ltd. reserves the right to carry out modifications on the Product, Parts or Accessories, as may be considered necessary from time to time, without being obliged to update this Parts Catalogue immediately. No part of this publication may be reproduced without the written consent of Escorts Ltd. Publication No : EPC-168 Revision : 01 Issue Date :

3 TRACTOR PARTS CATALOGUE MODEL : FT - 60 F CODE : F F F F F F F F F F F F F VARIANT DETAILS DB - DC-AVL DC - POWER STEERING-AVL SC - DB-AVL SC - POWER STEERING-AVL DC - DELUXE WITH RVERSE PTO PHASE - II SC - DB - AVL DC - LIVE PTO - AVL SC - DBWITH 14.9X28 REAR TYRE - AVL DC - DB LPTO DTVS AVL DC - DELUXE PHASE-II REVERSE PTO POWER STG. DC - AVL DC - DLX. REVERSE PTO PH-II DTVS ROTARY PUMP AVL DC - DB AVL WITH DTVS ROTARY PUMP NOTE : DC : DUAL CLUTCH SC : SINGLE CLUTCH DB : DISC BRAKE DLX : DELUXE ESCORTS ESCORTS LIMITED Agri Machinery Marketing Division (Customer Service &SPD) Plot No. : 115, Sector-24, Faridabad , India Phone: , , Fax : sop@escorts.co.in (For Orders), : HelpDeskServices@Escorts.co.in (For Query) i

4

5 FOREWORD This Parts Catalogue lists all parts of the Specified Model which may or may not be offered as spares. Please refer to remarks column for guidence. The Catalogue has been specially designed to assist in quoting the correct Part Number and the Part Description, as well as guiding in dismantle and assembly process during service. Modifications or additions which may be carried out in the Product after the release of this Catalogue, will be conveyed through our regular Service Technical Bulletins and Updates to this Publication. It is recommended that necessary corrections are made in the parts Catalogue and always kept updated. In case of any query, please feel free to write to us. Y.V. Anand Kumar General Manager - Customer Service & SPD ESCORTS LIMITED (AGRI MACHINERY MARKETING DIVISION) iii

6 CATALOGUE ORGANISATION CATALOGUE This comprehensive Parts Catalogue has been prepared to cover the specified models. The parts catalogue is organised as Illustration on the left hand side and Table on the right hand side, each with a unique Sheet Number. The contents page lists these Sheet Numbers along with the corresponding Figure Numbers used in earlier catalogues. ILLUSTRATION The Illustration shows the shape and assembly sequence of individual Parts. The purpose of the Illustration is to identify the part number and relate it to the Table. Each part in the illustration has an Item Number which corresponds to the item number in the Table. Parts which are available as Assembly or Kit are also identified by an Item Number for the Group. PART NUMBER It is the unique number identifying the Item. Parts are to be ordered based on this number alone. Items shown in Illustration but not assigned a Part No are not Serviced Separately. They are serviced as a KIT or assembly. DESCRIPTION Denotes the Part name. QUANTITY This indicates the quantity of the Part as applicable to the specified Assembly. AR Indicates Quantity to be used As Required. REMARKS This column contains additional information about the Part. The standard remarks are as follows. NSS-XX Part not serviced separately. Order the part under Item no XX and corresponding Part No. KIT Kit consists of more than one Parts Packed Together ASSY Assembly or Sub-Assembly consisting of more than one Parts Assembled Together FROM-YYYY Indicates Part applicability from TSN/Date TO -YYYY Indicates that the part is applicable up to (TSN - Tractor Serial Number) iv

7 ABBREVIATIONS The following abbreviations have been used in the catalogue. AR AS REQUIRED OSH OLD SHEET METAL ADJ ADJUSTING PDL PEDAL AFA ADJUSTABLE FRONT AXLE PS POWER STEERING ALR ALUMINIUM RADIATOR PT POWERTRAC ASSY ASSEMBLY PTO POWER TAKE OFF AUXH AUXILIARY HYDRAULICS RH RIGHT HAND BLS BOTTOM LINK SENSING REPL REPLACES BRG BEARING RPM REVOLUTION PER MINUTES BRK BRAKE RGB RATIONALISED GEAR BOX BRKT BRACKET SC SINGLE CLUTCH E ESCORT SL STRUT LINKAGE CL CLUTCH SDA SINGLE DROP ARM CONT. CONTROL SHFT SHAFT CON ROD CONNECTING ROD STD STANDARD C/SHFT CRANKSHAFT SSPL SOUTH SPECIAL CRB CARRARO BACKEND STG. STEERING CVR COVER TRANS TRANSMISSION DAC DRY AIR CLEANER TEMP TEMPERATURE DC DUAL CLUTCH TPT TAPPET DDA DOUBLE DROP ARM TSN TRACTOR SERIAL NUMBER DL DIFFERENTIAL LOCK TLS TOP LINK SENSING DPTO DUEL SPEED PTO UPR UPPER ENG ENGINE U/S UNDER SIZE EXH EXHAUST WHL WHEEL FIG FIGURE W/O WITHOUT FIP FUEL INJECTION PUMP (C) COLOUR VARIANT FT FARMTRAC (P) PILOT GR GEAR HDH HEAVY DUTY HYDRAULIC HSG HOUSING HYD HYDRAULIC GR GEAR IND INDIGENOUS INL INLET INT BLE INTERCHAGEABLE LH LEFT HAND LPTO LIVE PTO LWR LOWER MS MANUAL STEERING MNTG MOUNTING NSS-XX NOT SERVICED SEPERATELY (SERVICED AS PART OF ITEM XX) NI NOT ILLUSTRATED NO NUMBER O/S OVERSIZE v

8 CONTENTS Tab. No. Sheet No. DESCRIPTION Page No A-3 CYLINDER BLOCK LINER & CYL. HEAD CRANKSHAFT & FLY WHEEL ASSEMBLY CAMSHAFT & ROCKER ARM ASSEMBLY A-1 PISTON AND CONNECTING ROD OIL PUMP AND OIL PAN AIR CLEANER -OIL BATH TYPE MANIFOLD AND EXHAUST SYSTEM FUEL TANK AND FUEL SYSTEM FUEL TANK & FUEL SYSTEM (ROTARY PUMP) FUEL FILTER ASSEMBLY A-15 THROTTLE & ACCELERATION CONTROLS RADIATOR AND SHROUD ASSEMBLY WATER PUMP AND FAN ASSEMBLY FRONT WHEEL ASSEMBLY B-4 AXLE & STEERING PARTS RCB STG AXLE & STEERING PARTS HYDROSTATIC STEERING GEAR ASSEMBLY 57 (RECIRCULATING BALL TYPE ) STEERING MOTOR & PIPES-HYDROSTATIC A-4 STEERING MOTOR & PIPES-HYDROSTATIC (TANDEM) CLUTCH CONTROLS CLUTCH ASSEMBLY 69 (SINGLE PLATE ; STANDARD VERSION) CLUTCH ASSY. (DOUBLE PLATE 11" X12 ) TRANSMISSION CASE & SHIFT LEVERS TRANSMISSION GEARS A-1 TRANSMISSION GEARS CENTER HOUSING 89 vi

9 CONTENTS Tab. No. Sheet No. DESCRIPTION Page No A-1 DIFFERENTIAL AND GEAR SET A-1 DIFFERENTIAL LOCK COUPLING REAR AXLE ASSEMBLY POWER TAKE-OFF ASSEMBLY REAR WHEELS BRAKES - MECHANICAL DISC TYPE BRAKE CONTROLS HYDRAULIC LIFT COVER HYDRAULIC LIFT CYLINDER HYD. LIFT SHAFTS COMMON SHEET HYDRAULIC FLOW SYSTEM HYDRAULIC LIFT LINKAGES HYD PUMP (FRONT MOUNTED ) HYD PUMP ALTERNATOR ASSEMBLY AND GUARDS BATTERY AND BATTERY SUPPORT ELECTRICAL SWITCHES & CONTROLS A-3 INSTRUMENTS AND GAUGES WIRING HARNESS SYSTEM HEAD LIGHT AND PLOUGH LAMP A-11 SHEET METAL REAR VIEW MIRROR RUNNING BOARDS AND FENDER TOOL BOX EQUIPMENT DRIVER SEAT ASSEMBLY DECALS SST-EPT-01 SPECIAL SERVICE TOOLS 171 vii

10 Table - 1 CYLINDER BLOCK LINER AND CYL HEAD SHEET : A-3 1

11 Table - 1 CYLINDER BLOCK LINER AND CYL HEAD ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D HEAD ASSEMBLY CYLINDER FT60 AVL 1 1 D HEAD ASSEMBLY CYLINDER * 1 2 D VALVE GUIDE 6 3 D PLUG 1.13" CUP 3 4 D PLUG 1.761" CUP 1 UPTO 2/15/ D PLUG 1.75" CUP 1 FROM 2/16/ D SEAT VALVE INTAKE * 3 5 D INSERT INTAKE VALVE SEAT 3 6 D SEAT VALVE EXHAUST * 3 6 D INSERT EXHAUST VALVE SEAT 3 7 D BOLT 3/8"-16x0.75" HEX HEAD 2 8 D WASHER 3/8" SPRING LOCK 45 9 D GASKET ENGINE TO TRANSMISSION ASSY D GASKET REAR PLATE 1 10 D GASKET ENGINE COVER REAR PLATE * 1 10A D GASKET STARTER MOTOR 1 11 D REAR ENGINE PLATE 1 11 D PLATE ENGINE REAR * 1 12 D BOLT 5/16"-18x1.00" HEX HEAD 8 13 D WASHER 5/16" SPRING LOCK 8 14 D GASKET CYLINDER HEAD 1 14 D GASKET CYLINDER HEAD * 1 15 D GASKET SEAL CARRIER 1 15 D GASKET CRANKSHAFT REAR OIL SEAL * 1 16 D PLUG 3/8"x0.42" HEX HEAD 2 17 D SLEEVE CYLINDER BLOCK (FT-60) 3 18 D DOWEL CYLINDER HEAD TO BLOCK CYL D BLOCK ASSY. CYLINDER FT 60 ENGINE 1 FOR F ONLY UPTO 11/24/ D BLOCK ASSY. CYLINDER FT70AVL ENGINE * App. For F & UPTO DT. 1 FOR F ONLY FROM 11/25/ /11/ F , F , F

12 Table - 1 CYLINDER BLOCK LINER AND CYL HEAD SHEET : A-3 3

13 Table - 1 CYLINDER BLOCK LINER AND CYL HEAD ITEM PART NO. DESCRIPTION QTY REMARKS NO. 19 D BLOCK ASSY. CYLINDER FT70AVL ENGINE 1 FROM 27/1/07 ** 19 D BLOCK ASSY. CYLINDER FT 60 ENGINE * 1 UPTO 26/1/07 ** 20 D PLUG 1/4"-18 PIPE 1 21 D PLUG 1.50" CUP 2 22 D PLUG 0.761" CUP 2 23 D BEARING CAM SHAFT 4 24 D PIN 3/8" x1.125" DOWEL 2 25 D BOLT 9/16"-12X4.45" HEX HEAD 8 26 D BEARING CAP CLUSTER 4 27 D PIN 1/2" X 1.00" DOWEL 2 28 D COVER FLYWHEEL ACCESS 1 29 D PLUG REAR THREAD 1 29A D PLUG COVER (ADAPTER TACHOMETER DRIVE) 1 30 D PLUG 1/8"-27 HEX HEAD 1 31 D CARRIER SEAL REAR OIL SEAL 1 31A D STOP OIL PUMP GEAR 1 32 D STIFFENER ENGINE REAR COVER PLATE 1 33 D INSERT OIL FILTER MOUNTING 1 34 D FILTER ASSEMBLY LUBE OIL 1 35 D INDICATOR ASSEMBLY OIL LEVEL 1 36 D TUBE OIL LEVEL INDICATOR 1 37 D PLUG 3/8"-18 HEX HEAD 1 38 D DEFLECTOR FAN AIR RH 1 39 D NUT 5/16"-18 HEX 2 40 D WASHER 5/16" SPRING LOCK 2 41 D GASKET ENGINE FRONT COVER 1 41A D RING FUEL INJECTION PUMP 1 42 D PLATE ENGINE FRONT COVER 1 43 D BOLT 5/16"-18x.75" HEX HEAD LOCK 4 44 D GASKET CYLINDER BLOCK FRONT COVER 1 45 D GASKET TIMING COVER 1 * ** App. For F App. For F , F , F

14 Table - 1 CYLINDER BLOCK LINER AND CYL HEAD SHEET : A-3 5

15 Table - 1 CYLINDER BLOCK LINER AND CYL HEAD ITEM PART NO. DESCRIPTION QTY REMARKS NO. 45 D GASKET ENGINE VALVE TIMING GEAR CVR. 1 App. For F , F , F D COVER CYLINDER FRONT 1 App. For F D COVER CYLINDER FRONT 1 UPTO 12/3/ D COVER TIMING GEAR 1 FROM 12/4/ D COVER FUEL INJECTION PUMP TIMING 1 47 D COVER ENGINE VALVE TIMING GEAR 1 App. For F D FILTER ASSEMBLY ENGINE LUBE OIL 1 49 D CAP ENGINE LUBE OIL FILLER TUBE 1 50 D WASHER 5/16" SPRING LOCK 5 51 D BOLT 5/16"-18x0.75 HEX HEAD 4 52 D BOLT 5/16"-18x2.12" HEX HEAD 4 53 D WASHER 5/16" SPRING LOCK 4 54 D BOLT 5/16"-18x2.50" HEX HEAD 2 55 D BOLT 3/8"-16x1.50" HEX HEAD 1 56 D BOLT 3/8"-16x2.50" HEX HEAD 2 57 D BOLT 3/8"-16x2.25" HEX HEAD 8 58 D GASKET OIL FILTER MOUNTING 1 59 D BOLT M8x1.25x HEX HEAD 4 UPTO 10/27/ D BOLT M8x1.25x HEX HEAD 4 FROM 10/28/ D WASHER OIL FILTER BODY 2 61 D PLUG OIL FILTER BODY 2 62 D BRACKET OIL FILTER MOUNTING 1 63 D PLUG 1.185" CUP AR NI 64 D BOLT M12x1.5x144 CYLINDER HEAD D BOLT CYLINDER HEAD 10 App. For F D PLUG 1.814" CUP AR 67 D PLUG 1.56" CUP AR 68 D PLUG 0.64" CUP 1 69 D BOLT 5/16"-18x1.00" HEX HEAD 1 70 D PLATE CRANKSHAFT REAR OIL SEAL 1 App. For F

16 Table - 2 CRANKSHAFT AND FLY WHEEL ASSEMBLY SHEET :

17 Table - 2 CRANKSHAFT AND FLY WHEEL ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D PULLEY CRANK SHAFT 1 1 D PULLEY CRANKSHAFT (BALANCED) * 1 2 D KEY CRANKSHAFT PULLEY * 1 3 D WASHER M10 SPRING LOCK 1 4 D BOLT M10x1.50x HEX HEAD 1 5 D GEAR CRANKSHAFT 1 6 D SLINGER CRANKSHAFT * 1 7 D SEAL O RING 0.103"x1.75" 1 8 D SEAL DUST CRANKSHAFT FRONT * 1 9 D SEAL CRANKSHAFT FRONT OIL 1 9 D SEAL CRANKSHAFT FRONT (WAXED) * 1 10 D SPACER CRANK SHAFT PULLEY 1 10 D SPACER CRANKSHAFT PULLEY * 1 11 D BOLT FLYWHEEL MOUNTING 8 12 D WASHER 5/16" SPRING LOCK 6 13 D FLYWHEEL ASSEMBLY# 1 UPTO DT. 10/25/ D FLYWHEEL ASSEMBLY# 1 FROM DT.11/25/06 13 D FLYWHEEL ASSEMBLY LIVE PTO ** 1 13 D FLYWHEEL ASSY. AVL ENGINE (D.C.) *** 1 13 D FLYWHEEL ASSEMBLY 1 14 D DOWEL FLY-WHEEL 1 15 D SEAL ASSY. CRANKSHAFT REAR OIL SEAL 1 15 D SEAL OIL ASSY. CRANKSHAFT REAR * 1 16 D CRANKSHAFT FT45/60AVL 1 16 D CRANKSHAFT * 1 * App. For F ** App. For F & UPTO DT. 2/13/ F , F App. For F ONLY # *** App. For F , F , F , F , & FROM DT. 2/14/2003 F , F

18 Table - 2 CRANKSHAFT AND FLY WHEEL ASSEMBLY SHEET :

19 Table - 2 CRANKSHAFT AND FLY WHEEL ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 17 D KIT ENGINE MAIN AND CONNECTING ROD 1 BEARING SET SIZE STANDARD (FT-70) AVL 17S1 D KIT ENGINE MAIN AND CONNECTING ROD 1 BEARING SET SIZE 010 UNDER (FT-70) AVL 17S2 D KIT ENGINE MAIN AND CONNECTING ROD 1 BEARING SET SIZE 020 UNDER (FT-70) AVL 17S3 D KIT ENGINE MAIN AND CONNECTING ROD 1 BEARING SET SIZE 030 UNDER (FT-70) AVL 17S4 D KIT ENGINE MAIN AND CONNECTING ROD 1 BEARING SET SIZE 040 UNDER (FT-70) AVL 10

20 Table - 3 CAMSHAFT AND ROCKER ARM ASSEMBLY SHEET :

21 Table - 3 CAMSHAFT AND ROCKER ARM ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D CLAMP ASSEMBLY RADIATOR HOSE UPPER 2 2 D HOSE BREATHER 1 2 D HOSE CRANK CASE VENTILATION * 1 2 D HOSE CRANK CASE VENTILATION ** 1 UPTO 2-1 D HOSE BREATHER ** 1 FROM 3 D TUBE ASSY. CRANK CASE VENTILATION 1 3 D TUBE ASSY. CRANK CASE VENTILATION * 1 4 D BOLT M12x1.5x216 CYLINDER HEAD 4 4 D BOLT 9/12"-12x7.91" HEX FLANGED (CYL. HEAD) * 4 5 D SUPPORT VALVE ROCKER 4 5 D SUPPORT VALVE ROCKER * 4 6 D ARM ROCKER VALVE 6 7 D SCREW 7/16"-20 VALVE ROCKER ARM ADJUSTING 6 8 D SPRING VALVE ROCKER ARM 3 9 D SPACER VALVE ROCKER ARM 3 10 D PLUG 0.761" CUP 2 11 D SHAFT VALVE ROCKER 1 12 D BOLT 5/16"-18x0.625" HEX HEAD 8 12A D BREATHER ASSY. CRANK CASE VENTILLATION 1 13 D WASHER 5/16" SPRING LOCK 8 14 D COVER VALVE ROCKER ARM 1 14 D COVER VALVE ROCKER ARM * 1 15 D GASKET VALVE ROCKER ARM 1 15 D GASKET COVER VALVE ROCKER ARM * 1 16 D KEY VALVE SPRING RETAINER D KEY VALVE SPRING RETAINER * D RETAINER VALVE SPRING * 6 18 D SEAL VALVE STEM D SEAL VALVE STEM * 6 19 D SPRING VALVE 6 19 D SPRING VALVE * 6 19A D RETAINER VALVE SPRING LOWER 6 * App. For F ** App. For F , F , F

22 Table - 3 CAMSHAFT AND ROCKER ARM ASSEMBLY SHEET :

23 Table - 3 CAMSHAFT AND ROCKER ARM ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 20 D TAPPET VALVE 6 21 D ROD VALVE PUSH 6 21 D ROD VALVE PUSH * 6 22 D BOLT 7/16"-14x1.25" HEX HEAD 1 23 D WASHER 7/16" SPRING LOCK 1 24 D WASHER CAMSHAFT 1 25 D GEAR CAMSHAFT 1 25 D GEAR CAMSHAFT * 1 26 D BOLT 5/16"-18x0.75 HEX HEAD 2 27 D WASHER 5/16" SPRING LOCK 2 28 D PLATE CAM SHAFT THRUST D PLATE CAM SHAFT THRUST 1 29 D SPACER CAM SHAFT 1 30 D BEARING CAM SHAFT 4 31 D GEAR ASSEMBLY CAMSHAFT DRIVE 1 32 D CAM SHAFT 1 32 D CAM SHAFT * 1 33 D KEY 3/16"x3/4" WOODRUFF 1 34 D BUSH CAM SHAFT DRIVE 1 35 D ADAPTER CAM SHAFT 1 36 D BOLT 5/8"-11x2.125" HEX HEAD LOCK 1 37 D VALVE EXHAUST 3 37 D VALVE EXHAUST * 3 38 D VALVE INTAKE 3 38 D VALVE INTAKE * 3 39 D KIT ENGINE VALVES INLET & EXHAUST 1 KIT SET SIZE STD. (FT-60/45) * App. For F

24 Table - 3 CAMSHAFT AND ROCKER ARM ASSEMBLY SHEET :

25 Table - 3 CAMSHAFT AND ROCKER ARM ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 39S1 D VALVE SET INTAKE & EXHAUST (OVER SIZE) 1 KIT 39S2 D VALVE SET INTAKE & EXHAUST (OVER SIZE) 1 KIT 39S3 D KIT ENGINE VALVES INLET AND EXHAUST 1 KIT SIZE OVER 015 FT60 39S4 D VALVE SET INTAKE & EXHAUST (OVER SIZE) 1 KIT 40 D WASHER CAMSHAFT 1 41 D WASHER 7/16" SPRING LOCK 1 42 D BOLT 7/16"-14x1.25" HEX HEAD 1 43 D COVER CAMSHFT. HYD. PUMP DRIVE GEAR 1 43 D GEAR CAMSHAFT HYD. PUMP DRIVE * 1 44 D PIN 5x30 DOWEL 2 NI 45 D RETAINER VALVE SPRING UPPER 6 NI 46 D KIT ENGINE CAMSHAFT BUSH SET 1 KIT 47 D KIT ROCKER ARM WITH SCREW 1 KIT * App. For F

26 Table - 4 PISTON AND CONNECTING ROD SHEET : A-1 17

27 Table - 4 PISTON AND CONNECTING ROD ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D KIT PISTON RING SET (FT-60/70) * 9 1 D KIT PISTON RING SET (FT-60/70) AVL 9 2 D RING PISTON COMPRESSION UPPER 3 3 D RING PISTON COMPRESSION LOWER 3 4 D CONFORMABLE OIL RING ASSY. AVL D RING AND EXPANDER ASSEMBLY OIL * 3 5 D KIT ENGINE SET OF PISTON, PIN AND 1 CIRCLIP SET FT 60 SIDE DRAIN 5 D KIT ENGINE SET OF PISTON, PIN AND 1 CIRCLIP SET FT 60 (AVL) 6 D PISTON 4.4" 60AVL 3 6 D PISTON 4.4"(111.81MM) * 3 7 D PIN PISTON AVL D PIN PISTON * 3 8 D RING RETAINING 6 8 D RING INTERNAL RETAINING * 6 9 D ROD ASSEMBLY CONNECTING AVL D ROD ASSEMBLY CONNECTING * 3 10 D BUSH CONNECTING ROD 3 11 D BOLT CONNECTING ROD M12x D BEARING CONNECTING ROD 6 12 D BEARING CONNECTING ROD * 6 13 D KIT BUSH CONNECTING ROD 1 KIT * App. For F (Non-AVL) 18

28 Table - 5 OIL PUMP AND OIL PAN SHEET :

29 Table - 5 OIL PUMP AND OIL PAN ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D SHAFT AND GEAR ASSEMBLY 1 2 D SHAFT LUBE OIL PUMP 1 3 D GASKET LUBE OIL PUMP 1 4 D BODY OIL PUMP AVL 1 5 D WASHER LUBE OIL PUMP LOCK 2 6 D BOLT 3/8"-16x1.38" HEX HEAD 2 7 D ROTOR ASSY. LUBE OIL PUMP OUTER & INNER 1 8 D SHAFT LUBE OIL PUMP DRIVE 1 9 D STOP LUBE OIL PUMP RELIEF VALVE 1 10 D WASHER M8 SPRING LOCK 1 11 D BOLT M8x1.25x HEX HEAD 1 12 D PUMP ASSEMBLY ENGINE LUBE OIL 1 13 D PLUG LUBE OIL PUMP RELIEF VALVE 1 14 D SPRING LUBE OIL PUMP RELIEF VALVE 1 15 D VALVE LUBE OIL PRESSURE RELIEF 1 16 D COVER LUBE OIL PUMP 1 17 D COVER LUBE OIL PUMP SCREEN 1 18 D SCREEN LUBE OIL PUMP 1 19 D SPRING LUBE OIL PUMP SCREEN 1 20 D BOLT M6x1.00x HEX FLANGED (LUBE OIL PUMP) 4 21 D WASHER 1/4" SPRING LOCK 4 22 D GASKET OIL PAN 1 22 D GASKET OIL PAN * 1 23 D PAN ASSEMBLY OIL 1 23 D PAN ASSEMBLY OIL * 1 24 D WASHER 3/8" FLAT D WASHER 3/8" SPRING LOCK D BOLT 3/8"-16x0.875" HEX HEAD D PLUG OIL PAN DRAIN 1 28 D GASKET DRAIN PLUG 1 29 D KIT ROTOR AND SHAFT 1 KIT * App. For F (Non-AVL) 20

30 Table - 6 AIR CLEANER -OIL BATH TYPE SHEET :

31 Table - 6 AIR CLEANER -OIL BATH TYPE ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D GROMMET AIR CLEANER HOSE 1 1 D GROMMET AIR CLEANER 1 App. For F D TUBE ENGINE AIR CLEANER PIPE 1 2 D TUBE ENGINE AIR CLEANER OUTLET 1 App. For F A D CAP & EXTENSION ASSEMBLY AIR CLEANER 1 App. For F D BRACKET ASSY. ENGINE AIR CLEANER MOTG. 1 4 D STRAP ENGINE AIR CLEANER 1 5 D WASHER 3/8" FLAT 2 6 D WASHER 3/8" SPRING LOCK 2 7 D BOLT 3/8"-16x0.875" HEX HEAD 2 8 D CLAMP ASSEMBLY AIR CLEANER HOSE 1 9 D CLAMP ASSEMBLY 70MM DIAMETER 1 9 D CLAMP ASSY. INTAKE MANIFOLD FT80 * 1 10 D HOSE ENGINE AIR CLEANER PIPE 1 11 D HOSE ENGINE AIR CLEANER OUTLET 1 App. For F D HOSE ENGINE AIR CLEANER OUTLET ** 1 11 D HOSE ENGINE AIR CLEANER OUTLET 1 FROM 11/24/ D HOSE ENGINE AIR CLEANER OUTLET LWR. 1 App. For F D HOSE ENGINE AIR CLEANER OUTLET LWR. 1 UPTO 11/25/ D COVER ASSEMBLY AIR PRE CLEANER 1 13 D BODY ASSEMBLY AIR PRE CLEANER 1 14 D SHROUD AIR PRE CLEANER 1 UPTO 9/20/ D BASE ASSEMBLY AIR PRECLEANER 1 FROM 9/19/ D BASE ASSEMBLY AIR PRECLEANER 1 UPTO 9/20/ D PIPE ENGINE AIR CLEANER EXTENSION 1 FROM 2/27/ D PIPE ENGINE AIR CLEANER EXTENSION UPTO 2/27/ D NUT 3/8"-16 HEX 1 18 D BOLT 3/8"-16x0.75" HEX HEAD 1 19 D CLEANER ASSEMBLY ENGINE AIR 1 19 D CLEANER ASSY. ENGINE AIR (DRY TYPE) 1 App. For F * ** App. For F , F , F , F , F App. For F , F , F , 22

32 Table - 7 MANIFOLD AND EXHAUST SYSTEM SHEET :

33 Table - 7 MANIFOLD AND EXHAUST SYSTEM ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D MUFFLER ASSEMBLY VERTICAL 1 UPTO T D MUFFLER ASSEMBLY VERTICAL 1 FROM T D MUFFLER ASSY. HORIZONTAL (INSIDE) 1 App. For F , F , F D NUT M10x HEX 3 FROM T D WASHER M10 SPRING LOCK 6 FROM T D WASHER M10 FLAT 8 FROM T D STUD B M10x ZINC PASSIVATED 2 FROM T D GASKET MUFFLER INLET 1 FROM T D PIPE ASSEMBLY MUFFLER INLET 1 7 D PIPE ASSEMBLY INSIDE MUFFLER 1 App. For F , F , F D BOLT 3/8"-16x1.00" HEX HEAD 3 9 D WASHER 3/8" SPRING LOCK 9 10 D GASKET MUFFLER PIPE INLET 1 11 D WASHER 3/8" FLAT 2 12 D WASHER 3/8" SPRING LOCK 2 13 D BOLT 3/8"-16x0.75" HEX HEAD 2 14 D SENSOR UNIT WATER TEMPERATURE GAUGE 1 15 D THERMOSTAT ASSEMBLY WATER 1 16 D MANIFOLD ENGINE AIR INTAKE 1 16 D MANIFOLD ENGINE AIR INTAKE * 1 17 D BOLT M8x1.25x30 HEX HEAD 7 18 D WASHER 3/8" SPRING LOCK 7 19 D GASKET ENGINE AIR INTAKE MANIFOLD 1 19 D GASKET ENGINE AIR INTAKE MANIFOLD * 1 20 D GASKET EXHAUST MANIFOLD 1 20 D GASKET EXHAUST MANIFOLD * 1 21 D MANIFOLD EXHAUST 1 21 D MANIFOLD EXHAUST * 1 22 D BOLT M10x1.50x70-6G HEX HEAD 6 23 D CLAMP ASSEMBLY MUFFLER 1 NI, UPTO T * App. For F

34 Table - 8 FUEL TANK AND FUEL SYSTEM SHEET :

35 Table - 8 FUEL TANK AND FUEL SYSTEM ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D TUBE ASSY. FUEL INJECTION LEAK OFF * 1 UPTO 2/9/ D TUBE ASSY. FUEL INJECTION LEAK OFF * 1 FROM 2/10/ D TUBE ASSY. FUEL INJECTION LEAK OFF 1 UPTO 2/9/ D TUBE ASSY. FUEL INJECTION LEAK OFF FROM 2/10/ D TUBE ASSY. FUEL INJECTION LEAK OFF 1 FROM 11/25/ D WASHER FIP LEAK OFF TUBE (TYPE 603) 6 3 D BOLT M10x1.50x60-6G HEX HEAD 6 4 D CLAMP SPRING WIRE HOSE #7 G 2 5 D HOSE FUEL INJECTOR LEAK OFF 1 6 D CLAMP ASSEMBLY FUEL TUBE 2 7 D CONNECTOR FUEL RETURN TO TANK TUBE 1 8 D INJECTOR ASSY. FUEL (MICO P. No. F002C8Z870) 3 8 D INJECTOR ASSY. FUEL (MICO P. NO 754) * 3 UPTO 2/9/ D INJECTOR ASSY. FUEL (MICO P. NO 100) * 3 FROM 2/10/2005 8A D BOLT 5/16"-18x1.50" HEX HEAD 6 NI, 9 D WASHER 5/16" SPRING LOCK 6 10 D SEAL FUEL INJECTOR 6 11 D WASHER 3 12 D TUBE ASSEMBLY FUEL TANK RETURN 1 UPTO 5/26/ D TUBE ASSEMBLY FUEL TANK RETURN 1 FROM 5/27/ D TUBE ASSY. FUEL INJECTION CYL. NO 3 * 1 UPTO 2/9/ D TUBE ASSY. FUEL INJECTION 3RD CYL. 1 FROM 2/10/2005 FT60/45 (BHARAT TREM 3) * 13 D TUBE ASSY. FUEL INJECTION CYL. NO 3 1 UPTO 2/9/ D TUBE ASSY. FUEL INJECTION 3RD 1 FROM 2/10/2005 CYLINDER FT60/45 (BHARAT TREM 3) 13-2 D TUBE ASSY. FUEL INJECTION CYL.#3 (AVL60/45) 1 FROM 11/25/2006 * App. For F

36 Table - 8 FUEL TANK AND FUEL SYSTEM SHEET :

37 Table - 8 FUEL TANK AND FUEL SYSTEM ITEM PART NO. DESCRIPTION QTY REMARKS NO. 13A D CLAMP ASSEMBLY FUEL INJECTION PIPE 2 13A D CLAMP ASSY. FUEL INJECTION TUBE * 2 14 D TUBE ASSY. FUEL INJECTION CYL. NO 2 * 1 UPTO 2/9/ D TUBE ASSEMBLY FUEL INJECTION 2ND 1 FROM 2/10/2005 CYLINDER FT60/45 (BHARAT TREM 3) * 14 D TUBE ASSY. FUEL INJECTION CYL. NO 2 1 UPTO 2/9/ D TUBE ASSEMBLY FUEL INJECTION 2ND 1 FROM 2/9/2005 CYLINDER FT60/45 (BHARAT TREM 3) 14-2 D TUBE ASSY. FUEL INJECTION CYL.#2 (AVL60/45) 1 FROM 11/25/ D TUBE ASSY. FUEL INJECTION CYL. NO 1 * 1 UPTO 2/9/ D TUBE ASSEMBLY FUEL INJECTION 1ST 1 ONLY FROM 2/10/2005 CYLINDER FT60/45 (BHARAT TREM 3) * 15 D TUBE ASSY. FUEL INJECTION CYL. NO 1 1 UPTO 2/9/ D TUBE ASSEMBLY FUEL INJECTION 1ST 1 FROM 2/10/2005 CYLINDER FT60/45 (BHARAT TREM 3) 15-2 D TUBE ASSY. FUEL INJECTION CYL.#1 (AVL60/45) 1 FROM 11/25/ D TUBE ASSY. FUEL INJECTION CYL.#1 AVL ( DTVS ) 1 App. For F , F , F D FLANGE ASSY. INJECTOR MOTG. (MICO P.NO 011) * 3 FROM 2/10/ D WASHER 14.2x19.9 COPPER SEALING 13 (MICO P. NO ) * Applicable For F

38 Table - 8 FUEL TANK AND FUEL SYSTEM SHEET :

39 Table - 8 FUEL TANK AND FUEL SYSTEM ITEM PART NO. DESCRIPTION QTY REMARKS NO. 18 D BOLT M14x1.5x25.5 HEX HEAD PIPE UNION 5 19 D TUBE ASSY. FUEL FILTER TO FUEL INJEC. PUMP 1 UPTO T D BOLT 3/8"-16x0.875" HEX HEAD 2 21 D WASHER 3/8" FLAT 2 22 D BOLT 1/2"-20x2.00" HEX HEAD 2 23 D BRACKET FUEL FILTER 1 UPTO T D BRACKET FUEL FILTER (FT-60DX) 1 FROM T D WASHER 1/2" SPRING LOCK 2 25 D NUT 1/2"-20 HEX 2 26 D CAP AND KEY ASSEMBLY FUEL TANK 1 27 D TANK ASSEMBLY FUEL 1 27 D TANK ASSEMBLY FUEL ** 1 27 D TANK ASSEMBLY FUEL # 1 27 D TANK ASSEMBLY FUEL ## 1 28 D TUBE ASSY. FUEL FEED PUMP TO FUEL FILTER 1 UPTO T D TUBE ASSY. FUEL FEED PUMP TO FUEL FILTER 1 FROM T A D FILTER ASSY. FUEL (MICO P. NO F002H20107) 1 29 D SEAL O RING 0.103"x0.625" D SEAL O RING FUEL INJECTION PUMP D RING FUEL INJECTION PUMP 1 30 D TUBE ASSEMBLY FUEL INJECTION PUMP 1 30 D TUBE ASSEMBLY FUEL INJECTION PUMP 1 Applicable For F , F D PUMP ASSY. FUEL INJECTION (MICO P. NO 080) 1 UPTO 5/5/ D PUMP ASSY. FUEL INJECTION FT60 AVL 1 FROM 5/6/2006 BHARAT TREM 3 (MICO PART No. F002A0Z518) 31 D PUMP ASSY. FUEL INJECTION (MICO P. NO 119) * 1 32 D WASHER 5/16"x-.93x0.06 FLAT 3 * ** # ## App. For F App. For F App. For F , F , F App. For F , F , F

40 Table - 8 FUEL TANK AND FUEL SYSTEM SHEET :

41 Table - 8 FUEL TANK AND FUEL SYSTEM ITEM PART NO. DESCRIPTION QTY REMARKS NO. 33 D BOLT 3/8"-24x1.25" HEX HEAD 4 34 D CLIP FUEL INJECTION PUMP ** 1 34 D CLIP FUEL TANK SENSOR WIRE 1 FROM 11/25/ D BRACKET FUEL INJECTION PUMP SUPPORT 1 App. For F D BOLT FUEL INJECTION PUMP ADAPTER PLATE 3 37 D WASHER 5/16" SPRING LOCK 3 38 D PLATE FUEL INJECTION PUMP 1 38 D PLATE FUEL INJECTION PUMP AVL ( DTVS ) 1 App. For F , F , F D GEAR FUEL INJECTION PUMP DRIVE 1 39 D GEAR FUEL INJECTION PUMP DRIVE ** 1 40 D GASKET FUEL INJECTION PUMP 1 41 D COUPLING FUEL INJECTION PUMP DRIVE 1 42 D BRACKET FUEL WATER SEPERATOR MOUNTING 1 FROM 5/27/ A D BOLT M10x1.50x40-6G HEX HEAD 2 FROM 5/27/ D TUBE ASSY. FUEL TANK TO FUEL FEED PUMP 1 UPTO T D SEPARATOR WATER 1 FROM 5/27/ D TUBE ASSY. WATER SEPARATOR TO FUEL FEED PUMP 1 46 D TAP AND SCREEN ASSEMBLY 1 47 D BOLT 5/16"-18x1.00" HEX HEAD 1 48 D SPACER FUEL TANK MOUNTING LOWER 1 49 D WASHER 5/16" LOCK EXTERNAL TOOTH 1 50 D WASHER 5/16" FLAT 1 51 D NUT 5/16"-24 HEX 1 52 D BOLT 5/16"-24x0.625" HEX HEAD 1 53 D TUBE ASSY. FUEL TANK TO FUEL WATER SEPARATOR 1 FROM T D GROMMET FUEL TANK FILTER FLANGE * 1 NI, 55 D BRACKET FUEL TANK MOUNTING (FT-60DLX) * 1 NI, 56 D TUBE ASSEMBLY FUEL FILTER TO FIP 1 NI, FROM T D WASHER FUEL INJECTOR TUBE 1 NI 58 D PIPE FUEL INJECTION PIPE LUBRICATION 1 NI, App. For D SCREW HOLLOW AVL 2 NI * ** App. For F , F , F App. For F

42 Table - 9 FUEL TANK AND FUEL SYSTEM (ROTARY PUMP) SHEET :

43 Table - 9 FUEL TANK AND FUEL SYSTEM (ROTARY PUMP) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D TUBE ASSY. FUEL INJECTION LEAK OFF 1 UPTO 2/9/ D TUBE ASSY. FUEL INJECTION LEAK OFF FROM 2/10/ D TUBE ASSY. FUEL INJECTION LEAK OFF 1 FROM 11/25/ D WASHER FIP LEAK OFF TUBE (TYPE 603) 6 3 D BOLT M10x1.50x60-6G HEX HEAD 6 4 D CLAMP SPRING WIRE HOSE #7 G 2 5 D HOSE FUEL INJECTOR LEAK OFF 1 6 D CLAMP ASSEMBLY FUEL TUBE 2 7 D CONNECTOR FUEL RETURN TO TANK TUBE 1 8 D INJECTOR ASSY. FUEL FT60 AVL (DTVS) 3 8 D INJECTOR ASSEMBLY FUEL (MICO) 3 9 D TUBE ASSY. FUEL INJECTION CYL.#3 AVL ( DTVS ) * 1 10 D TUBE ASSY. FUEL INJECTION CYL.#2 AVL ( DTVS ) * 1 11 D TUBE ASSY. FUEL INJECTION CYL.#1 AVL ( DTVS ) * 1 12 D CLAMP ASSEMBLY FUEL INJECTION PIPE 2 13 D TUBE ASSY. FUEL TANK RETURN AVL ( DTVS ) * 1 14 D BOLT M14x1.5x25.5 HEX HEAD PIPE UNION 5 15 D WASHER 14.2x19.9 COPPER SEALING 13 (MICO PART NO ) 16 D BOLT 3/8"-16x0.875" HEX HEAD 2 17 D WASHER 3/8" FLAT 2 18 D FILTER ASSEMBLY FUEL FT60 AVL * 1 (DTVS DRG/DISPATCH NO /G A) 19 D BRACKET ASSEMBLY FUEL FILTER * 1 UP TO 19 D BRACKET FUEL FILTER (DTVS) MOTG. * 1 FROM 06/05/ D BOLT 1/2"-20x2.00" HEX HEAD 2 21 D WASHER 1/2" SPRING LOCK 2 22 D TUBE ASSY. WATER SEPARATOR TO FUEL FILTER * 1 23 D CAP AND KEY ASSEMBLY FUEL TANK 1 24 D TANK ASSEMBLY FUEL 1 App. For F F ,F * App. For F , F , F

44 Table - 9 FUEL TANK AND FUEL SYSTEM (ROTARY PUMP) SHEET :

45 Table - 9 FUEL TANK AND FUEL SYSTEM (ROTARY PUMP) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 25 D TUBE ASSEMBLY FUEL FILTER TO FUEL * 1 INJECTION PUMP WITH WATER SEPARATOR (DTVS) 25 D TUBE ASSY. FUEL FEED PUMP TO FUEL FILTER 1 App. For F FROM T D PUMP ASSEMBLY FUEL INJECTION AVL60 1 App. For F UPTO 12/24/ D PUMP ASSY. FUEL INJECTION FT60 AVL * 1 FROM 12/20/2004 ( DTVS DRG NO ) 27 D SEAL O RING FUEL INJECTION PUMP D RING FUEL INJECTION PUMP 1 27A D BRACKET FUEL INJECTION PUMP SUPPORT 1 App. For F D BOLT M8x HEX HEAD 3 29 D BOLT FUEL INJECTION PUMP ADAPTER PLATE 3 30 D WASHER 5/16" SPRING LOCK 3 31 D PLATE FUEL INJECTION PUMP AVL ( DTVS ) * 1 32 D GEAR FUEL INJECTION PUMP DRIVE 1 33 D COUPLING FUEL INJECTION PUMP DRIVE 1 34 D SEPARATOR WATER 1 FROM 5/27/ D BRACKET FUEL WATER SEPERATOR MOTG. 1 FROM 5/27/ D BOLT M10x1.50x40-6G HEX HEAD 2 FROM 5/27/ D WASHER M10 SPRING LOCK 2 38 D TUBE ASSY. FUEL TANK TO FUEL WATER SEPARATOR 1 FROM T D TAP AND SCREEN ASSEMBLY 1 40 D BOLT 5/16"-24x0.625" HEX HEAD 1 41 D BOLT 5/16"-18x1.00" HEX HEAD 1 42 D SPACER FUEL TANK MOUNTING LOWER 1 43 D WASHER 5/16" LOCK EXTERNAL TOOTH 1 44 D WASHER 5/16" FLAT 1 45 D NUT 5/16"-24 HEX 1 46 D TUBE ASSY FUEL INJECTION CYL.#2 (AVL60/45) 1 NI FROM 11/25/ D TUBE ASSY FUEL INJECTION CYL.#3 (AVL60/45) 1 NI FROM 11/25/2006 * App. For F , F , F

46 Table - 10 FUEL FILTER ASSEMBLY SHEET :

47 Table - 10 FUEL FILTER ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D FILTER ASSY. FUEL (MICO) 1 1 D FILTER ASSEMBLY FUEL FT60 AVL (DTVS) * 1 2 D SCREW FIXING 2 3 D WASHER C5NE9G546A 2 4 D PLATE FILTER COVER 1 5 D WASHER 2 6 D SCREW AIR VENT 2 7 D KIT FUEL FILTER INSERTS PRIMARY 2 AND SECONDARY ( MICO ) 8 D WASHER 2 9 D FILTER FUEL SECONDARY WITH RING 1 NSS-7 10 D FILTER FUEL PRIMARY WITH RING 1 NSS-7 11 D FILTER HOUSING 2 NSS-1 12 D WASHER SEALING 2 13 D SCREW SLUDGE 2 14 D WASHER SEALING 1 15 D BOLT M14x1.5x25.5 HEX HEAD PIPE UNION 1 16 D DECAL FILTER CLEANER 2 * App. For F , F , F

48 Table - 11 THROTTLE AND ACCELERATION CONTROLS SHEET : A-15 39

49 Table - 11 THROTTLE AND ACCELERATION CONTROLS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D KNOB 1 2 D LEVER HAND THROTTLE 1 3 D GROMMET HAND THROTTLE CONTROL LEVER 1 3 D GROMMET HAND THROTTLE CONTROL LEVER 1 App. For F D GROMMET HAND THROTTLE CONTROL LEVER 1 App. For F UPTO 2/17/ D GROMMET HAND THROTTLE CONTROL LEVER ** 1 FROM 2/18/ D STOP THROTTLE CONTROL LEVER 1 5 D BOLT M5x0.80x8-6G HEX HEAD 1 6 D ARM ASSY. HAND THROTTLE CONTROL 1 7 D ROD ASSEMBLY ACCELERATOR CONTROL D LINK ASSEMBLY FOOT ACCELERATOR * 1 8 D WASHER 3/8" FLAT 2 9 D PLATE THROTTLE CONTROL 1 10 D BOLT 5/16"-24x1.25" SQUARE HEAD 1 11 D PLATE ASSEMBLY FRICTION DISC 1 11 D PLATE ASSY. THROTTLE CONT. POWER STG. *** 1 12 D DISC THROTTLE CONTROL 2 13 D PIN 3/32"x0.75" COTTER 1 14 D WASHER 3/8" FLAT 1 15 D PIN 3/8"x13/16" CLEVIS 1 16 D BRACKET ACCELERATOR PEDAL 1 16 D BRACKET ACCLERATOR PEDAL * 1 17 D WASHER 1/4" FLAT 2 18 D BOLT 1/4"-28x0.62" HEX HEAD 2 19 D NUT 1/4"-28 HEX 2 20 D ARM ASSEMBLY ACCELERATOR CONTROL 1 20 D ARM ASSEMBLY ACCLERATOR CONTROL * 1 * App. For F , F , F ** App. For F , F *** App. For F , F , F

50 Table - 11 THROTTLE AND ACCELERATION CONTROLS SHEET : A-15 41

51 Table - 11 THROTTLE AND ACCELERATION CONTROLS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 21 D PIN 3/16"x1.125" SPRING 2 22 D BRACKET & HUB ASSY. ACCELERATOR PEDAL 1 23 D SPRING FOOT ACCELERATOR PEDAL 2 23 D SPRING FOOT THROTTLE CONTROL RET. * 2 24 D CONTROL ASSEMBLY FUEL SHUT OFF 1 25 D WASHER 1/2" SPRING LOCK 1 26 D NUT 1/2"-20 HEX 1 27 D CLAMP FUEL SHUT OFF CABLE 1 27A D LINKAGE ASSEMBLY THROTTLE CONTROL 1 27A D LINKAGE ASSY. THROTTLE CONTROL ** 1 28 D LOCK THROTTLE LEVER 1 29 D NUT 1/4"-28 HEX 1 30 D WASHER 1/4" FLAT 1 31 D ROD ASSEMBLY THROTTLE CONTROL 1 App. For F UPTO 2/17/ D ROD ASSEMBLY THROTTLE CONTROL 1 App. For F FROM 2/18/ D ROD ASSEMBLY THROTTLE CONTROL 1 31 D ROD ASSEMBLY THROTTLE CONTROL 1 App. For F , F , F D WASHER 1/4" FLAT 1 33 D PIN 1/16"x0.50" COTTER 1 34 D WASHER 5/16" FLAT 1 35 D NUT 5/16"-24 HEX D NUT 5/16"-24 HEX 1 36 D BRACKET ASSEMBLY FUEL SHUT OFF 1 37 D END ASSEMBLY FUEL SHUT OFF LEVER 1 38 D SCREW 2 39 D WASHER FIP SHUT OFF LEVER 2 * ** App. For F , F , F App. For F , F , F , F

52 Table - 12 RADIATOR AND SHROUD ASSEMBLY SHEET :

53 Table - 12 RADIATOR AND SHROUD ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D RADIATOR AND SHROUD ASSEMBLY 1 App. For F D RADIATOR AND SHROUD ASSEMBLY 1 UPTO T D RADIATOR AND SHROUD ASSEMBLY 1 FROM T D SEAL RADIATOR AIR 1 3 D CLAMP RADIATOR HOSE UPPER 2 4 D HOSE RADIATOR UPPER 1 5 D BOLT 5/16"-18x1.125" HEX HEAD 2 6 D WASHER 5/16" SPRING LOCK 2 7 D CONNECTION WATER OUTLET 1 8 D THERMOSTAT ASSEMBLY WATER 1 9 D GASKET WATER OUTLET 1 10 D INSULATOR RADIATOR SUPPORT 2 11 D CLAMP RADIATOR HOSE LOWER 2 12 D HOSE RADIATOR LOWER 1 13 D BEADING RADIATOR GRILL * 1 NI * App. For F

54 Table - 13 WATER PUMP AND FAN ASSEMBLY SHEET :

55 Table - 13 WATER PUMP AND FAN ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D GASKET WATER PUMP 1 2 D PUMP ASSEMBLY WATER 1 3 D GASKET WATER PUMP COVER 1 4 D IMPELLER WATER PUMP 1 5 D SEAL WATER PUMP WITH PTFE RING 1 6 D BEARING WATER PUMP 1 7 D WASHER 5/16" SPRING LOCK 4 8 D BOLT 5/16"-18x1.50" HEX HEAD 4 9 D PULLEY WATER PUMP 1 10 D BOLT 7/16"-14x3.00" HEX HEAD 4 11 D WASHER 7/16" SPRING LOCK 4 12 D FAN ASSEMBLY WATER COOLING 1 12 D FAN ASSEMBLY WATER COOLING 1 App. For F D BELT DRIVE COGGED 1 14 D WASHER 5/16" SPRING LOCK 4 15 D BOLT 5/16"-18x0.88" HEX HEAD 4 16 D KIT WATER PUMP REPAIR KOYO BEARING KIT 17 D PUMP ASSEMBLY WATER HALF 1 18 D PUMP ASSEMBLY WATER (HALF WITH 1 NI KOYO BEARING) 46

56 Table - 14 FRONT WHEEL ASSEMBLY SHEET :

57 Table - 14 FRONT WHEEL ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D WHEEL ASSY. FRONT 4.5x16" WITHOUT PRIMER 2 2 D BEARING ASSEMBLY FRONT WHEEL OUTER 2 3 D WASHER FRONT HUB BEARING RETAINER 2 4 D NUT 1"-12 SLOTTED HEX 2 5 D PIN 5/32"x1.25" COTTER D PIN 5/32"x1.75" COTTER 2 6 D CAP HUB GREASE 2 7 D NUT FRONT WHEEL BOLT 12 8 D TUBE ASSEMBLY FRONT WHEEL 6.00x D TYRE ASSY. FRONT WHEEL 6x16-8 PLY 2 10 D HUB FRONT WHEEL 2 11 D BUSH FRONT WHEEL HUB 2 12 D SEAL FRONT AXLE HUB 2 13 D BEARING ASSEMBLY FRONT WHEEL INNER 2 14 D BOLT FRONT WHEEL HUB D GREASE NIPPLE 1/2"-27 STRAIGHT FITTING 2 16 D KIT FRONT WHEEL BOLTS AND NUTS SET 2 KIT 48

58 Table - 15 AXLE AND STEERING PARTS RCB STEERING SHEET : B-4 49

59 Table - 15 AXLE AND STEERING PARTS RCB STEERING ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D PLUG STEERING COLUMN 1 2 D GEAR ASSEMBLY STEERING 1 2 D GEAR ASSEMBLY STEERING 1 Applicable For F , F D LINK ASSEMBLY STEERING DRAG RH 1 ASSY 3A D SLEEVE STEERING DRAG LINK RH 1 4 D ARM STEERING SPINDLE FRONT AXLE 2 5 D BOLT 3/4"-10x4.00" HEX HEAD 4 6 D NUT 3/4"-10 HEX 4 7 D SUPPORT FRONT AXLE 1 8 D NUT 5/16'-18 HEX LOCK 4 9 D COVER STEERING BALL JOINT DUST 2 10 D END STEERING DRAG LINK REAR 2 11 D SLEEVE STEERING DRAG LINK ADJUSTING LH1 12 D CLAMP 4 13 D WASHER 5/16" SPRING LOCK 4 14 D NUT M8x HEX 4 15 D BOLT M8x1.25x HEX HEAD 4 16 D LINK ASSEMBLY STEERING DRAG LH 1 ASSY 16A D NUT 7/16"-14HEX 2 17 D END STEERING DRAG LINK FRONT 2 18 D COVER STEERING BALL JOINT DUST 2 19 D BOLT 7/16"-14x2.25" HEX HEAD 2 20 D BUSH FRONT AXLE SUPPORT 1 21 D SEAL O RING 0.780"x1.72" 1 22 D WASHER FRONT AXLE THRUST REAR 1 23 D WASHER FRONT AXLE CENTRE REAR 1 23A D SHIM FRONT AXLE CENTRE PIN (0.008") AR 23A-S D SHIM FRONT AXLE CENTRE PIN (0.016") AR 23A-S1 D SHIM FRONT AXLE CENTRE AR 24 D SLEEVE FRONT AXLE CENTRE 1 24A D COVER DUST 3/4" D AXLE FRONT CENTRE 1 50

60 Table - 15 AXLE AND STEERING PARTS RCB STEERING SHEET : B-4 51

61 Table - 15 AXLE AND STEERING PARTS RCB STEERING ITEM PART NO. DESCRIPTION QTY REMARKS NO. 26 D COVER DUST 7/16" 8 27 D PLUG DUST FRONT SUPPORT 1 28 D AXLE FRONT RH 1 29 D SPINDLE ASSEMBLY FRONT AXLE RH 1 30 D BRACKET FRONT AXLE TRUNION 1 31 D PLUG 1/8"-27 HEX HEAD 2 32 D PLUG & NUT ASSY. FRONT AXLE TRUNION 1 33 D BOLT TRUNION BRACKET MOUNTING 4 34 D WASHER 1/2" FLAT 4 35 D BUSH FRONT AXLE TRUNION BRACKET 1 36 D SEAL O RING 0.780"x1.98" 1 37 D WASHER FRONT AXLE CENTRE PIN THRUST 1 38 D SLEEVE FRONT AXLE TRUNION CENTRE 1 39 D SPACER FRONT AXLE 4 40 D NUT 5/8"-11 HEX 4 41 D AXLE FRONT LH 1 42 D BOLT 5/8"-11x4.00" HEX HEAD 4 43 D SEAL SPINDLE FRONT AXLE UPPER 2 44 D COVER FRONT AXLE SPINDLE SEAL DUST UPPER 2 45 D SEAL FRONT AXLE SPINDLE UPPER 2 46 D BEARING SPINDLE FRONT AXLE 2 47 D SEAL FRONT AXLE SPINDLE LOWER 2 48 D SEAL FRONT AXLE SPINDLE 2 49 D SPACER FRONT AXLE SPINDLE 2 50 D COVER FRONT AXLE SPINDLE SEAL DUST LOWER 2 51 D KEY 1/4"x7/8" WOODRUFF 2 52 D SPINDLE ASSEMBLY FRONT AXLE LH 1 53 D BUSHING FRONT WHEEL SPINDLE PIN UPPER 2 54 D GREASE NIPPLE 1/2"-27 STRAIGHT FITTING 2 55 D BUSHING FRONT WHEEL SPINDLE PIN LOWER 2 56 D BAFFLE ASSEMBLY FRONT AXLE SUPPORT 1 57 D KIT BUSHES SET SPINDLES 1 52

62 Table - 16 AXLE AND STEERING PARTS HYDROSTATIC SHEET :

63 Table - 16 AXLE AND STEERING PARTS HYDROSTATIC ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BOLT 3/4"-10x4.00" HEX HEAD 4 2 D NUT 3/4"-10 HEX 4 3 D SUPPORT FRONT AXLE 1 4 D COVER DUST 7/16" 8 5 D PLUG DUST FRONT SUPPORT 1 5A D COVER DUST 3/4" 24 6 D LINK ASSY. STEERING DRAG (POWER STEERING) 1 7 D END ASSY. CYLINDER POWER STEERING 2 8 D NUT M18x1.50 LOCK 2 9 D NUT 7/16"-14HEX 2 10 D ARM STG. SPINDLE FRONT AXLE POWER STEERING 2 11 D BOLT 7/16"-14x2.25" HEX HEAD 2 12 D AXLE FRONT RH POWER STEERING 1 13 D SPINDLE ASSEMBLY FRONT AXLE RH 1 14 D BRACKET FRONT AXLE TRUNION POWER STG. MACHINE 1 15 D PLUG FRONT AXLE TRUNION POWER STG D CIRCLIP TRUNION POWER STEERING 1 17 D BOLT TRUNION BRACKET MOUNTING 4 18 D WASHER 1/2" FLAT 4 19 D BUSH BRACKET FRONT AXLE TRUNION 1 20 D SHIM FRONT AXLE CENTRE POWER STG. (0.015") 3 20S D SHIM FRONT AXLE CENTRE POWER STG. (0.005") AR 21 D WASHER FRONT AXLE THRUST FRONT 1 22 D AXLE FRONT CENTRE POWER STEERING 1 23 D SPACER FRONT AXLE SPINDLE 4 24 D NUT 5/8"-11 HEX 4 25 D AXLE FRONT LH POWER STEERING 1 26 D WASHER FRONT AXLE THRUST REAR 1 27 D CYLINDER ASSEMBLY POWER STEERING 1 28 D SEAL O RING 0.780"x1.72" 1 29 D BUSH FRONT AXLE SUPPORT 1 30 D BOLT 5/8"-11x4.00" HEX HEAD 4 31 D BUSHING FRONT WHEEL SPINDLE PIN UPR. 2 54

64 Table - 16 AXLE AND STEERING PARTS HYDROSTATIC SHEET :

65 Table - 16 AXLE AND STEERING PARTS HYDROSTATIC ITEM PART NO. DESCRIPTION QTY REMARKS NO. 32 D GREASE NIPPLE 1/2"-27 STRAIGHT FITTING 2 33 D BUSHING FRONT WHEEL SPINDLE PIN LWR D BAFFLE ASSEMBLY FRONT AXLE SUPPORT 1 35 D SEAL SPINDLE FRONT AXLE UPPER 2 36 D COVER FRONT AXLE SPINDLE SEAL DUST UPR D SEAL FRONT AXLE SPINDLE UPPER 2 38 D BEARING SPINDLE FRONT AXLE 2 39 D SEAL FRONT AXLE SPINDLE LOWER 2 40 D SEAL FRONT AXLE SPINDLE 2 41 D SPACER FRONT AXLE SPINDLE 2 42 D COVER FRONT AXLE SPINDLE SEAL DUST LWR D KEY 1/4"x7/8" WOODRUFF 2 44 D SPINDLE ASSEMBLY FRONT AXLE LH 1 45 D KIT BUSHES SET SPINDLES 1 KIT 46 D KIT STEERING CYLINDER SEALS (FT-60) 1 KIT 56

66 Table - 17 STEERING GEAR ASSY. (RECIRCULATING BALL TYPE ) SHEET :

67 Table - 17 STEERING GEAR ASSY. (RECIRCULATING BALL TYPE ) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D GEAR ASSEMBLY STEERING 1 1 D GEAR ASSEMBLY STEERING 1 Applicable For F , F D SHIM STEERING GEAR HSG. COVER (0.002") AR 2S1 D SHIM STEERING GEAR HSG. COVER (0.005") AR 2S2 D SHIM STEERING GEAR HSG. COVER (0.010") AR 3 D NUT & SHAFT ASSY. STEERING GEAR BALL 1 4 D BALL STEERING GEAR WORM (9.53MM) 62 5 D NUT 7/8"-14 HEX 2 6 D WASHER 7/8" SPRING LOCK 2 7 D SEAL STEERING GEAR 2 8 D BOLT 1/2"-13x1.38" HEX HEAD 4 (STEERING GEAR MOUNTING) 8A D SEAL DUST STEERING GEAR PINION SHAFT AR 9 D WASHER 1/2" SPRING LOCK 4 9A D ARM STEERING GEAR 2 10 D HOUSING STEERING GEAR D RACE BALL D PLUG STEERING GEAR OIL FILLER 1 13 D CAP STEERING WHEEL 1 13 D CAP STEERING WHEEL * 1 14 D NUT NYLOCK STEERING WHEEL RETAINING 1 15 D WHEEL ASSEMBLY STEERING 1 15 D WHEEL ASSEMBLY STEERING * 1 16 D GROMMET STEERING COLUMN SHROUD 1 17 D SEAL STEERING COLUMN DUST 1 18 D BUSHING ASSY. STEERING COLUMN UPPER 1 19 D COLUMN ASSEMBLY STEERING GEAR 1 20 D BOLT M10x1.50x HEX HEAD 4 21 D WASHER 7/16" SPRING LOCK 4 * App. For F , F , F

68 Table - 17 STEERING GEAR ASSY. (RECIRCULATING BALL TYPE ) SHEET :

69 Table - 17 STEERING GEAR ASSY. (RECIRCULATING BALL TYPE ) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 22 D RACE BALL D BALL STEERING GEAR WORM (9.53MM) D NUT LOCK D CIRCLIP B21.6x0.97 STEERING GEAR LASH 2 ADJUSTER RETAINING 26 D CIRCLIP A7.36x0.77 STEERING GEAR LASH 2 ADJUSTER RETAINING 27 D SHIM STEERING GEAR LASH ADJ. (0.05MM) AR 27S1 D SHIM STEERING GEAR LASH ADJ. (0.10MM) AR 27S2 D SHIM STEERING GEAR LASH ADJ. (0.20MM) AR 27S3 D SHIM STEERING GEAR LASH ADJ. (0.25MM) AR 28 D SPACER STEERING GEAR LASH ADJ. (4.7x12.0x1.5) 2 29 D SCREW ADJUSTING D SHAFT STEERING GEAR PITMAN SINGLE 1 31 D GASKET STEERING GEAR HOUSING COVER 1 32 D PLATE STEERING GEAR 1 33 D BOLT M8x1.25x HEX HEAD 6 34 D WASHER M8 SPRING LOCK 6 35 D SHAFT STEERING GEAR PITMAN DOUBLE 1 60

70 Table - 18 STEERING MOTOR AND PIPES-HYDROSTATIC SHEET :

71 Table - 18 STEERING MOTOR AND PIPES-HYDROSTATIC ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D NUT NYLOCK STEERING WHEEL RETAINING 1 2 D WHEEL ASSEMBLY POWER STEERING 1 3 D SEAL STEERING COLUMN DUST 1 4 D COLUMN ASSEMBLY POWER STEERING 1 5 D GROMMET STEERING COLUMN SHROUD 1 6 D MOTOR ASSEMBLY POWER STEERING 1 7 D SEAL O RING 4 8 D ADAPTOR 3/4" POWER STEERING 5 9 D TUBE ASSY. LEFT TURN POWER STEERING 1 10 D TUBE ASSY. RIGHT TURN POWER STEERING 1 11 D CLAMP ASSY. TUBING POWER STEERING 2 12 D ADAPTOR 9/16"-18 HIGH PRESSURE TUBE FITTING 2 13 D BRACKET HOSE TO OIL SUMP 1 14 D NUT 9/16"-18 HEX 2 15 D HOSE ASSY. POWER STEERING CYLINDER 2 16 D COIL ASSY. COOLING (POWER STEERING) 1 17 D BOLT 1/2"-13x1.38" HEX HEAD 4 (STEERING GEAR MOUNTING) 18 D WASHER 1/2" SPRING LOCK 4 19 D BRACKET ASSEMBLY POWER STEERING 1 20 D TUBE ASSY. RETURN POWER STEERING 1 21 D TUBE ASSY. PRESSURE POWER STEERING 1 22 D PUMP ASSEMBLY POWER STEERING 1 23 D BRACKET POWER STEERING TUBES HOLDING 1 24 D BRACKET COOLING COIL POWER STEERING 1 Applicable For F

72 Table - 19 STEERING MOTOR AND PIPES-HYDROSTATIC (TANDEM) SHEET : A-4 63

73 Table - 19 STEERING MOTOR AND PIPES-HYDROSTATIC (TANDEM) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D CAP STEERING WHEEL 1 2 D NUT NYLOCK STEERING WHL. RETAINING 1 3 D BRACKET POWER STG. TUBES HOLDING 1 4 D WHEEL ASSEMBLY POWER STEERING 1 5 D SEAL STEERING COLUMN DUST 1 6 D COLUMN ASSEMBLY POWER STEERING 1 7 D GROMMET STEERING COLUMN SHROUD 1 8 D COIL ASSEMBLY COOLING 1 9 D BRACKET COOLER COIL MOUNTING 1 10 D BOLT 3/8"-16x0.75" HEX HEAD 2 11 D WASHER 3/8" FLAT 8 12 D TUBE ASSEMBLY STEERING CYL. LH TURN 1 13 D TUBE ASSEMBLY STEERING CYL. RH TURN 1 14 D BRACKET HOSE TO OIL SUMP 1 15 D NUT 9/16"-18 HEX 2 16 D HOSE ASSEMBLY POWER STEERING CYLI D HOSE WATER PUMP TO THERMOSTAT HSG D CLAMP HOSE 35A 2 19 D RESERVOIR ASSEMBLY POWER STEERING 1 (TANDEM PUMP) 20 D CLAMP ASSEMBLY FUEL TUBE 2 21 D HOSE RESERVOIR RETURN PIPE 1 22 D TUBE ASSEMBLY OIL COOLER TO INLET 1 OIL RESERVOIR HOSE 23 D TUBE ASSEMBLY CONNECTING TUBE 1 TO OIL COOLER 24 D BRACKET POWER STEERING OIL 1 RESERVOIR MOUNTING 25 D WASHER M8 FLAT 2 26 D WASHER M8 SPRING LOCK 2 27 D BOLT M8x1.25x15 HEX HEAD 2 28 D TUBE ASSY. OIL RESERVOIR HOSE TO 1 INLET REAR PUMP TUBE HOSE 29 D HOSE HYDRAULIC LIFT PUMP INLET TUBE 1 30 D TUBE ASSEMBLY INLET REAR PUMP 1 31 D PUMP ASSEMBLY HYD. LIFT OIL (TANDEM) 1 31A D SEAL O RING 0.103"x0.875" 2 32 D BOLT M8x1.25x HEX HEAD 4 64

74 Table - 19 STEERING MOTOR AND PIPES-HYDROSTATIC (TANDEM) SHEET : A-4 65

75 Table - 19 STEERING MOTOR AND PIPES-HYDROSTATIC (TANDEM) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 33 D TUBE ASSEMBLY INLET FILTER TO PUMP 1 34 D HOSE HYDRAULIC LIFT PUMP INLET TUBE 1 34A D CLAMP ASSEMBLY RADIATOR HOSE UPPER 3 35 D TUBE ASSEMBLY INLET PUMP TO FILTER 1 35A D BOLT M6X1.0X20-6G HEX HEAD 2 36 D SEAL O Ring 0.139"X1.125" 2 37 D BOLT 3/8"-16X1.00" HEX HEAD 4 38 D BRACKET FILTER ADAPTER MOUNTING 1 39 D ADAPTOR 9/16"-18 HIGH PRESSURE TUBE FITTING 2 40 D BRACKET ASSEMBLY POWER STEERING 1 41 D MOTOR ASSEMBLY POWER STEERING 1 42 D ADAPTOR 3/4" POWER STEERING 2 43 D SEAL O RING 0.087"x0.644" 4 44 D CONNECTER 1/2" FLX 3/4"-16 STRAIGHT THREAD 2 45 D BOLT 1/2"-13x1.75" HEX HEAD 4 46 D WASHER 1/2" FLAT 4 47 D TUBE ASSEMBLY PRESSURE HYDRAULIC 1 REAR PUMP OUTLET TO STEERING MOTOR 48 D TUBE ASSEMBLY CONNECTING TO 1 STEERING MOTOR RETURN TUBE 49 D CLAMP CONNECTING TUBE STEERING MOTOR RET D TUBE ASSEMBLY SPOOL VALVE INLET 1 FOR SINGLE SPOOL VALVE 50A D CLAMP HYD. DELIVERY PIPE 1 51 D TUBE ASSY PUMP PRESSURE EXTENSION 1 52 D ELBOW 3/4"-16 HIGH PRESSURE TUBE FITTING 1 53 D TUBE ASSY INLET HOUSING TO ADAPTOR 1 54 D FILTER ASSY HYDRAULIC LIFT OIL INTAKE 1 55 D ADAPTOR OIL FILTER 1 56 D ADOPTER HYDRAULIC OIL FILTER 1 57 D BOLT M8X1.25X HEX HEAD 2 58 D CLAMP ASSY TUBING POWER STEERING 3 59 D BRACKET PRESSURE PIPE CLAMP MOTG D BOLT M6X1.00X35-6G HEX HEAD 4 61 D WASHER M6 SPRING LOCK 4 62 D TUBE ASSEMBLY HYD. PUMP PRESSURE 1 63 D SEAL O RING 0.103"X0.625" 2 64 D GEAR DRIVE TANDEM PUMP 1 FOR AVL INLINE ENG. 64 D GEAR DRIVE TANDEM PUMP 1 FOR AVL ROTARY ENG. 66

76 Table - 20 CLUTCH CONTROLS SHEET :

77 Table - 20 CLUTCH CONTROLS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D PLUG CLUTCH RELEASE SHAFT 1 2 D BUSH CLUTCH RELEASE SHAFT 2 3 D NUT 3/8"-16 HEX PREVAILING TORQUE 1 4 D FORK CLUTCH RELEASE SHAFT 1 5 D BOLT CLUTCH RELEASE FORK TO SHAFT 1 6 D WASHER CLUTCH RELEASE SHAFT 1 7 D SEAL O RING 1.40"x0.92" 1 8 D SHAFT ASSEMBLY CLUTCH RELEASE 1 9 D PIN 3/8"x1.14" CLEVIS 2 10 D PIN 1/8"x0.75" COTTER 2 11 D NUT 3/8-24 HEX 2 12 D ROD & CLEVIS ASSY. CLUTCH CONTROL 1 12 D ROD & CLEVIS ASSY. CLUTCH CONTROL * 1 13 D PAD BRAKE AND CLUTCH PEDAL STOP 1 App. For F , F , F D PEDAL ASSY. TRANS. CLUTCH CONTROL 1 14 D PEDAL ASSY. TRANSMISSION CLUTCH 1 App. For F , F , F D PEDAL ASSY. TRANSMISSION CLUTCH ** 1 15 D BOLT 7/16"-14x1.25" HEX HEAD 2 16 D BRACKET CLUTCH PEDAL SPRING PIVOT REAR AXLE 1 16 D BRACKET CLUTCH PEDAL SPRING PIVOT 1 REAR AXLE LIVE PTO ** 17 D WASHER 7/16" SPRING LOCK 2 18 D SPRING TRANS. CLUTCH PEDAL ASSIST 1 19 D BUSH CLUTCH PEDAL 2 20 D GREASE NIPPLE 1/4"-28 STRAIGHT FITTING 1 21 D KIT BUSH CLUTCH SHAFT 1 * ** Applicable for all except - F , F , F App. For F , F , F , F

78 Table - 21 CLUTCH ASSY. (SINGLE PLATE ; STANDARD VERSION) SHEET :

79 Table - 21 CLUTCH ASSY. (SINGLE PLATE ; STANDARD VERSION) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D PLATE AND COVER ASSEMBLY CLUTCH 11" 1 2 D KIT CLUTCH REPAIR 11" FT 1 3 D PAD SPRING 9 NSS-1 4 D SPRING 3 5 D PIN SPLIT 3 6 D ROLLER NEEDLE D PIN RELEASE LEVER 3 8 D PIN PRESSURE PLATE 3 9 D SPRING ANTI RATTLE 3 10 D SUPPORT RELEASE LEVER 3 11 D LEVER RELEASE 3 12 D PLATE ASSEMBLY PRESSURE 1 13 D DISC ASSY. CLUTCH 11" (RANDOM WOVEN) 1 14 D PLATE FACE 2 15 D RIVET 5x5.25mm D RIVET 4x6.0mm D RIVET 5x4.7mm D BEARING CLUTCH D BEARING ASSEMBLY CLUTCH RELEASE 1 19 D HUB CLUTCH RELEASE BEARING 1 20 D WASHER 3/8" SPRING LOCK 6 21 D BOLT 3/8"-16x0.96" HEX HEAD 6 22 D BEARING CLUTCH PILOT 1 23 D RETAINER CLUTCH PILOT BEARING 1 24 D KIT CLUTCH FACING SET 11" FT MOULDED D KIT CLUTCH FACING 11" RANDOM WOVEN 1 70

80 Table - 22 CLUTCH ASSEMBLY (DOUBLE PLATE 11" X12 ) SHEET :

81 Table - 22 CLUTCH ASSEMBLY (DOUBLE PLATE 11" X12 ) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D CLUTCH ASSEMBLY LIVE PTO 12"x11" 1 2 D DIAGHPRAM SPRING (FT-45DC) 1 3 D TRAVEL CLUTCH PRESSURE RING (FT-45LPTO) 1 4 D DISC ASSY. TRANSMISSION CLUTCH 12" 1 (RANDOM WOVEN) 5 D RELEASE SCREW (FT-45LPTO) 3 6 D NUT HEX NYLOCK 6 7 D BUSH FT45LPTO 3 8 D PIN FT45LPTO 3 9 D BRACKET FT45LPTO 3 10 D PIN COTTER 3 11 D PRESSURE PLATE FT 45LPTO 1 12 D DISC ASSEMBLY PTO CLUTCH 11" 1 13 D RING PTO CLUTCH PRESSURE (FT-45LPTO) 1 14 D SPRING ANTI RATTLE FT45LPTO 6 15 D SCREW HEX SOCKET HEAD 6 16 D PIN GUIDE FT45LPTO 6 17 D PAD NOSED FT45LPTO 6 18 D TRAVEL REL LEVER (FT-45LPTO) 6 19 D PACKING NYLON FT45LPTO 6 20 D PIN RELEASE FT45LPTO 3 21 D DRIVER SCREW FT45LPTO 3 22 D WASHER 5/16" SPRING LOCK D BOLT M8x1.25x40-6G HEX HEAD D HUB CLUTCH RELEASE BEARING 1 25 D BEARING ASSEMBLY CLUTCH RELEASE 1 26 D RETAINER CLUTCH PILOT BEARING 1 27 D BEARING CLUTCH PILOT 1 Applicable For F , F , F , F , F , F , F

82 Table - 23 TRANSMISSION CASE AND SHIFT LEVERS SHEET :

83 Table - 23 TRANSMISSION CASE AND SHIFT LEVERS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D INDICATOR ASSEMBLY TRANSMISSION OIL 1 2 D BALL TRANS. GEAR HIGH LOW SHIFTING 1 2 D KNOB TRANS. GEAR SHIFTER HIGH/LOW * 1 3 D BALL ASSEMBLY GEAR MAIN SHIFTING 1 3 D KNOB TRANS. GEAR SHIFTER MAIN * 1 4 D LEVER GEAR SHIFTING 1 5 D LEVER HIGH LOW GEAR SHIFTING 1 6 D BOOT HIGH LOW LEVER 2 7 D SEAL O RING 0.070"x0.625" (S94 FINISH) 2 8 D PIN TRANS. GEAR SHAFT LEVER SOCKET 2 9 D SPRING TRANS. GEAR SHIFTING LEVER 2 10 D RETAINER GEAR SHIFTING LEVER 2 11 D COVER & LEVER ASSY. TRANS. CASE UPPER 1 11 D COVER & LEVER ASSY. TRANS. CASE UPPER * 1 12 D HARNESS ASSEMBLY TRANSMISSION 1 13 D CLIP SAFETY START SWITCH HARNESS 1 14 D SWITCH ASSY. TRANS. CONTROL SELECTOR NEUTRAL 1 15 D PLUNGER SAFETY START SWITCH 1 16 D BALL 3/8" DIAMETER 1 17 D SPRING SAFETY START SWITCH 1 18 D TUBE OIL LEVEL INDICATOR 1 19 D RING TRANS. GEAR SHIFTING LEVER SNAP 2 20 D BOLT 3/8"-16x1.00" HEX HEAD 9 21 D WASHER 3/8" SPRING LOCK 9 22 D PLUG OIL FILLER REAR AXLE 1 UPTO 1/27/ D PLUG OIL FILLER REAR AXLE 1 FROM 1/28/ D BREATHER ASSY. TRANS. OIL FILLER 1 23 D GASKET PLUG OIL FILLER REAR AXLE 1 24 D DOWEL TRANSMISSION CASE COVER 1 25 D STOP GEAR SHIFTING LEVER 1 26 D BOLT 5/6"-18x0.56" HEX HEAD 4 27 D PIN 1 28 D RETAINER SAFETY START SWITCH 1 29 D FORK TRANS. GEAR SHIFT 1st & 3rd SPEED 1 * App. For F , F , F

84 Table - 23 TRANSMISSION CASE AND SHIFT LEVERS SHEET :

85 Table - 23 TRANSMISSION CASE AND SHIFT LEVERS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 30 D BOLT 5/8"-11x2.375" HEX HEAD 2 31 D BOLT 3/4"-16x2.75" HEX HEAD 2 32 D CASE TRANSMISSION (MACHINED) 1 33 D CONNECTOR GEAR SHIFTING HIGH LOW 1 34 D SCREW TRANSMISSION CONNECTOR LOCK 6 35 D NUT 3/8-24 HEX 6 36 D FORK TRANS. GEAR SHIFT HIGH LOW 1 37 D CONNECTOR GEAR SHIFTING 1st & 3rd SPEED 1 38 D FORK TRANS. GEAR SHIFT 2nd & REVERSE SPEED 1 39 D PIN 3/16"x1.219" CLEVIS 1 40 D PLUNGER TRANSMISSION GEAR SHIFT ARM 1 41 D SPRING SELECTOR STOP PLUNGER 1 42 D RETAINER SELECTOR SPRING PLUNGER 1 43 D ARM TRANSMISSION 4th SPEED 1 44 D PIN 1/16"x0.50" COTTER 1 45 D FORK TRANSMISSION GEAR SHIFT 4th SPEED 1 46 D PIN 3/8"x1.26/1-27 STRAIGHT D PIN TRANSMISSION GEAR SHIFT 1 47 D SPRING TRANSMISSION GEAR SHIFT 4 48 D BALL 3/8" DIAMETER 4 49 D GASKET COVER CASE TRANSMISSION 1 50 D PLUG 1/4"-18 PIPE 1 51 D INTERLOCK TRANSMISSION GEAR SHIFTING 2 52 D DOWEL 1/2"x0.8125" PLAIN 2 53 D RAIL TRANSMISSION GEAR SHIFT 4th SPEED 1 54 D RAIL TRANS. GEAR SHIFT 2nd & REVERSE SPEED 1 55 D RAIL TRANS. GEAR SHIFT 1st & 3rd SPEED 1 56 D RAIL TRANS. GEAR SHIFT HIGH LOW SPEED 1 57 D PLUG WITH PRECOATED SEALER 1 58 D NUT 5/8"-11 HEX 2 59 D BUSH CLUTCH RELEASE SHAFT 2 60 D BOLT 5/8"-11x3.75" HEX HEAD 2 61 D WASHER 7/16" SPRING LOCK 2 62 D BOLT 7/16"-14x1.25" HEX HEAD 2 63 D WIRE LOCKING GEAR SHIFTING PLATE TO COVER 1 64 D KIT BUSH CLUTCH SHAFT 1 65 D KIT GASKETS GEAR BOX FT 1 76

86 Table - 24 TRANSMISSION GEARS SHEET :

87 Table - 24 TRANSMISSION GEARS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BEARING ASSEMBLY LIVE PTO 1 2 D SEAL OIL TRANSMISSION INPUT SHAFT 1 3 D PIN 3/8"x0.687" DOWEL 2 4 D GASKET PLATE CLUTCH RELEASE 1 BEARING HUB SUPPORT 5 D PLATE CLUTCH RELEASE BEARING HUB SUPPORT 1 6 D BOLT 3/8"-16x1.125" HEX HEAD 7 7 D GASKET RETAINER TRANS. INPUT SHAFT 1 8 D RETAINER TRANSMISSION INPUT SHAFT 1 9 D BOLT 3/8"-16x0.875" HEX HEAD LOCK (GRADE-5) 5 10 D RING TRANS. MAIN DRIVE SHAFT BEARING SNAP 1 11 D BEARING BALL TRANSMISSION INPUT SHAFT 1 12 D SHAFT TRANSMISSION INPUT (MACHINED) 1 13 D RING TRANS. MAIN COUNTERSHAFT SNAP 1 14 D WASHER MAIN DRIVE SHAFT GEAR THRUST 1 15 D RING MAIN SHAFT DRIVE GEAR BEARING SNAP 1 16 D GEAR TRANS. 3rd SPEED (MACHINED) 1 16A D CONNECTOR & COUPLING ASSY. TRANS. GEAR 3 17 D COUPLING TRANS. GEAR SHIFT (MACHINED) 3 18 D CONNECTOR TRANS. MAIN SHAFT (MACHINED) 3 19 D GEAR TRANS. 1st SPEED (MACHINED) 1 20 D WASHER MAIN DRIVE SHAFT GEAR THRUST 2 21 D GEAR TRANS. REVERSE SPEED (MACHINED) 1 22 D GEAR TRANS. 2nd SPEED (MACHINED) 1 23 D BEARING ASSEMBLY TRANS. MAIN SHAFT 1 24 D RING TRANS. MAIN DRIVE SHAFT BEARING SNAP 1 25 D BEARING ASSEMBLY LIVE PTO 1 26 D GEAR TRANS. COUNTERSHAFT (MACHINED) 1 27 D COUNTER SHAFT TRANS. (MACHINED) 1 28 D BEARING BALL COUNTERSHAFT REAR 1 29 D WASHER NEEDLE BEARING INPUT SHAFT THRUST 2 UPTO 2/27/2004 Applicable For F , F , F , F , F

88 Table - 24 TRANSMISSION GEARS SHEET :

89 Table - 24 TRANSMISSION GEARS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 30 D BEARING NEEDLE TRANS. INPUT SHAFT 1 UPTO 2/27/ D BEARING NEEDLE TRANS. INPUT SHAFT 1 FROM 2/28/ D SHAFT TRANS. MAIN DRIVE (MACHINED) 1 32 D BEARING ASSY. TRANS. MAIN SHAFT REAR PILOT 1 33 D BUSH TRANSMISSION GEAR OUTPUT 1 34 D SHAFT TRANSMISSION OUTPUT (MACHINED) 1 35 D COUPLING AND SHAFT ASSEMBLY TRANS D GEAR ASSEMBLY TRANSMISSION OUTPUT 1 37 D WASHER TRANSMISSION OUTPUT SHAFT 1 38 D BEARING ASSY. TRANS. OUTPUT SHAFT 1 39 D RING FRONT TRANS. INNER HOUSING SNAP 1 40 D COUPLING TRANS. COUNTERSHAFT 1 SLIDING GEAR (MACHINED) 41 D RING TRANS. COUNTER SHAFT FRONT BEARING SNAP 1 42 D BEARING BALL TRANSMISSION 1 COUNTERSHAFT HIGH LOW REAR 43 D GEAR TRANSMISSION COUNTERSHAFT 1 HIGH LOW (MACHINED) 44 D COUNTERSHAFT PTO (MACHINED) 1 45 D DOWEL 1/2"x0.8125" PLAIN 2 46 D GASKET TRANSMISSION OUTPUT RETAINER 1 47 D RETAINER TRANS. OUTPUT SHAFT 1 BEARING (MACHINED) 48 D SEAL TRANSMISSION OUTPUT SHAFT 1 49 D BOLT 3/8"-16x1.125" HEX HEAD D SHIM TRANS. OUTPUT SHAFT 0.003" THICK AR 50S1 D SHIM TRANS. OUTPUT SHAFT 0.005" THICK AR 50S2 D SHIM TRANS. OUTPUT SHAFT 0.012" THICK AR 51 D RETAINER TRANSMISSION OUTPUT 1 52 D BOLT 3/8"-16x0.875" HEX HEAD LOCK (GRADE-5) 4 Applicable For F , F , F , F , F

90 Table - 24 TRANSMISSION GEARS SHEET :

91 Table - 24 TRANSMISSION GEARS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 53 D BUSH TRANSMISSION REVERSE IDLER GEAR 1 54 D GEAR TRANS. REVERSE IDLER (MACHINED) 1 55 D SHAFT TRANSMISSION REVERSE IDLER 1 56 D SEAL IDLER SHAFT RETAINER BOLT LOCK 1 57 D BOLT TRANSMISSION REVERSE IDLER 1 58 D RING PTO COUNTERSHAFT SMALL BEARING SNAP 1 59 D SLEEVE PTO COUNTERSHAFT (MACHINED) 1 60 D RING PTO BEARING HOUSING SNAP 2 61 D BEARING BALL PTO COUNTERSHAFT 1 62 D SEAL OIL PTO COUNTERSHAFT 1 63 D BEARING BALL TRANSMISSION 1 COUNTERSHAFT HIGH LOW FRONT Applicable For F , F , F , F , F

92 Table - 25 TRANSMISSION GEARS SHEET : A-1 83

93 Table - 25 TRANSMISSION GEARS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BEARING ASSEMBLY LIVE PTO 1 2 D RING PTO INPUT SHAFT SNAP 1 3 D SEAL OIL TRANSMISSION INPUT SHAFT 1 4 D PIN 3/8"x0.687" DOWEL 2 5 D GASKET PLATE CLUTCH RELEASE BEARING 1 HUB SUPPORT 6 D PLATE TRANSMISSION FRONT (MACHINED) 1 6 D PLATE ASSY. TRANS. CLUTCH RELEASE * 1 7 D BOLT 3/8"-16x1.125" HEX HEAD 7 8 D GASKET RETAINER TRANS. INPUT SHAFT 1 9 D RETAINER TRANS. INPUT SHAFT LIVE PTO (MACHINED) 1 10 D BOLT 3/8"-16x0.875" HEX HEAD LOCK (GRADE-5) 5 11 D BEARING ASSEMBLY LIVE PTO 1 12 D SEAL ASSEMBLY PTO INPUT SHAFT 1 13 D SHAFT PTO INPUT TRANS. (MACHINED) 1 14 D RING TRANS. MAIN DRIVE SHAFT BEARING SNAP 1 15 D RING MAIN SHAFT DRIVE GEAR 1 16 D PLATE TRANSMISSION MAIN DRIVE 1 17 D BEARING BALL TRANS. INPUT SHAFT 1 18 D SHAFT TRANSMISSION INPUT (MACHINED) 1 19 D RING TRANS. MAIN COUNTERSHAFT SNAP 1 20 D WASHER MAIN DRIVE SHAFT GEAR THRUST 1 21 D GEAR TRANS. 3rd SPEED (MACHINED) 1 22 D COUPLING TRANS. GEAR SHIFT (MACHINED) 3 23 D CONNECTOR TRANS. MAIN SHAFT (MACHINED) 2 24 D GEAR TRANSMISSION 1st SPEED (MACHINED) 1 25 D WASHER MAIN DRIVE SHAFT GEAR THRUST 2 26 D GEAR TRANS. REVERSE SPEED (MACHINED) 1 Applicable For F , F , F , F , F , F , F * App. For F , F , F

94 Table - 25 TRANSMISSION GEARS SHEET : A-1 85

95 Table - 25 TRANSMISSION GEARS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 27 D GEAR TRANS. 2nd SPEED (MACHINED) 1 28 D BEARING ASSY. TRANS. MAIN SHAFT 1 29 D BEARING PTO COUNTERSHAFT 1 30 D RING PTO COUNTER SHAFT GEAR SNAP 1 31 D WASHER PTO COUNTERSHAFT THRUST 1 32 D GEAR PTO COUNTERSHAFT (MACHINED) 1 33 D RING TRANS. MAIN DRIVE SHAFT BEARING SNAP 1 34 D BEARING ASSEMBLY LIVE PTO 1 35 D GEAR TRANS. COUNTERSHAFT (MACHINED) 1 36 D COUNTER SHAFT TRANS. LIVE PTO (MACHINED) 1 37 D BEARING BALL COUNTERSHAFT REAR 1 38 D WASHER NEEDLE BEARING INPUT SHAFT THRUST 2 UPTO 2/27/ D BEARING NEEDLE TRANS. INPUT SHAFT 1 UPTO 2/27/ D BEARING NEEDLE TRANS. INPUT SHAFT 1 FROM 2/28/ D SHAFT TRANS. MAIN DRIVE (MACHINED) 1 41 D BEARING ASSY. TRANS. MAIN SHAFT REAR PILOT 1 42 D BUSH TRANSMISSION GEAR OUTPUT 1 43 D SHAFT TRANS. OUTPUT (MACHINED) 1 44 D COUPLING AND SHAFT ASSEMBLY TRANS D GEAR ASSEMBLY TRANSMISSION OUTPUT 1 46 D WASHER TRANSMISSION OUTPUT SHAFT 1 47 D BEARING ASSY. TRANS. OUTPUT SHAFT 1 48 D RING FRONT TRANS. INNER HOUSING SNAP 1 49 D COUPLING TRANS. COUNTERSHAFT 1 SLIDING GEAR (MACHINED) 50 D RING TRANSMISSION COUNTER SHAFT 1 FRONT BEARING SNAP 51 D BEARING BALL TRANSMISSION 1 COUNTERSHAFT HIGH LOW REAR 52 D GEAR TRANSMISSION COUNTERSHAFT 1 HIGH LOW (MACHINED) Applicable For F , F , F , F , F , F , F * App. For F , F , F

96 Table - 25 TRANSMISSION GEARS SHEET : A-1 87

97 Table - 25 TRANSMISSION GEARS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 52 D GEAR ASSY. TRANS. COUNTER SHAFT * 1 53 D CIRCLIP A25x2.0 H * 1 54 D PTO COUNTERSHAFT LIVE PTO (MACHINED) 1 54 D SHAFT TRANSMISSION COUNTER (LIVE PTO) 1 55 D CIRCLIP B62x2.0 N * 1 56 D DOWEL 1/2"x0.8125" PLAIN 2 57 D GASKET TRANSMISSION OUTPUT RETAINER 1 58 D RETAINER TRANSMISSION OUTPUT SHAFT 1 BEARING (MACHINED) 59 D SEAL TRANSMISSION OUTPUT SHAFT 1 60 D BOLT 3/8"-16x1.125" HEX HEAD D SHIM TRANS. OUTPUT SHAFT 0.003" THICK AR 61S1 D SHIM TRANS. OUTPUT SHAFT 0.005" THICK AR 61S2 D SHIM TRANS. OUTPUT SHAFT 0.012" THICK AR 62 D RETAINER TRANSMISSION OUTPUT 1 63 D BOLT 3/8"-16x0.875" HEX HEAD LOCK (GRADE-5) 4 64 D BUSH TRANS. REVERSE IDLER GEAR 1 65 D GEAR TRANS. REVERSE IDLER (MACHINED) 1 66 D SHAFT TRANSMISSION REVERSE IDLER 1 67 D SEAL IDLER SHAFT RETAINER BOLT LOCK 1 68 D BOLT TRANSMISSION REVERSE IDLER 1 69 D RING PTO COUNTERSHAFT SMALL BEARING SNAP 1 70 D SLEEVE PTO COUNTERSHAFT (MACHINED) 1 71 D RING PTO BEARING HOUSING SNAP 2 72 D BEARING BALL PTO COUNTERSHAFT 1 73 D SEAL OIL PTO COUNTERSHAFT 1 74 D BEARING BALL TRANSMISSION 1 COUNTERSHAFT HIGH LOW FRONT 75 D SEAL OIL 32.5x39.5x5 * 1 NI, Applicable For F , F , F , F , F , F , F * App. For F , F , F

98 Table - 26 CENTER HOUSING SHEET :

99 Table - 26 CENTER HOUSING ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D GASKET HYDRAULIC LIFT ASSEMBLY 1 2 D GASKET HAND BRAKE OPENING COVER 1 3 D COVER HAND BRAKE OPENING 1 4 D BOLT 7/16"-14x0.875" HEX HEAD 2 5 D PLUG OIL FILLER REAR AXLE 1 6 D GASKET PLUG OIL FILLER REAR AXLE 1 7 D HOUSING REAR AXLE CENTRE 1 8 D NUT 9/16"-12 HEX 4 9 D GASKET TRANS. TO REAR AXLE ASSEMBLY 1 10 D BOLT 1/2"-13x2.25" HEX HEAD 3 11 D NUT 1/2"-13 HEX 6 12 D BOLT 9/16"-12x2.50" HEX HEAD 2 13 D BOLT 9/16"-12x 2.00" HEX HEAD 2 14 D BOLT 1/2"-13x2.00"HEX HEAD 1 15 D BOLT 1/2"-13x1.75" HEX HEAD 1 16 D PLUG 1/4"-18 PIPE 1 17 D BUSH BRAKE PEDAL SHAFT 2 18 D GASKET REAR AXLE HOUSING AR 18S1 D GASKET REAR AXLE HSG. TO CENTRE HOUSING AR 18S2 D GASKET REAR AXLE HSG. TO CENTRE HOUSING AR 19 D PLUG WITH PRECOATED SEALER 1 20 D KIT BUSH BRAKE PEDAL SHAFT SET 1 KIT 90

100 Table - 27 DIFFERENTIAL AND GEAR SET SHEET : A-1 91

101 Table - 27 DIFFERENTIAL AND GEAR SET ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BEARING ASSY. TAPER ROLLER (REAR AXLE) 1 2 D NUT 1/2"-20 NYLOCK HEX 12 3 D CASE REAR AXLE DIFFERENTIAL GEAR RH 1 4 D SCREW 1/2"-20x1.62" FLIP HEAD 12 5 D BUSH DIFFERENTIAL CASE REAR AXLE 2 6 D WASHER REAR AXLE DIFFERENTIAL 2 SUN GEAR THRUST 7 D GEAR REAR AXLE DIFFERENTIAL SIDE LH 1 8 D GEAR SET BEVEL PINION & CROWN WHEEL 1 REAR AXLE 9 D CONE AND ROLLER ASSEMBLY REAR AXLE 2 10 D BOLT 9/16"-12x1.25" HEX HEAD 4 11 D WASHER 9/16" SPRING LOCK 4 12 D RETAINER ASSY. BEVEL PINION SHAFT REAR AXLE 1 13 D BEARING REAR AXLE BEVEL PINION SHAFT PILOT 1 14 D RING REAR AXLE BEVEL PINION SHAFT SNAP 1 15 D SPIDER SHAFT REAR AXLE DIFFERENTIAL 1 16 D PINION REAR AXLE DIFFERENTIAL 4 17 D WASHER REAR AXLE DIFFERENTIAL 4 STAR GEAR THRUST 18 D COUPLING DRIVE SHAFT REAR AXLE 1 19 D BOLT REAR AXLE CLAMP NUT 1 20 D CLAMP REAR AXLE DRIVE PINION 1 21 D NUT LOCK REAR AXLE 1 22 D WASHER REAR AXLE DRIVE PINION 1 BEARING THRUST 23 D WASHER REAR AXLE DRIVE PINION 1 BEARING THRUST 24 D GEAR REAR AXLE DIFFERENTIAL SIDE RH 1 25 D CASE REAR AXLE DIFFERENTIAL GEAR LH 1 26 D BOLT 1/2"-13x2.88" HEX HEAD LOCK 8 27 D CONE & ROLLER ASSEMBLY REAR AXLE 1 DIFFERENTIAL RH 92

102 Table - 27 DIFFERENTIAL AND GEAR SET SHEET : A-1 93

103 Table - 27 DIFFERENTIAL AND GEAR SET ITEM PART NO. DESCRIPTION QTY REMARKS NO. 28 D ADAPTOR REAR AXLE DIFFERENTIAL LOCK 1 29 D SPRING ADAPTOR REAR AXLE 1 DIFFERENTIAL LOCK 30 D COUPLING REAR AXLE DIFFERENTIAL LOCK 1 31 D WASHER COUPLING DIFFERENTIAL LOCK 1 REAR AXLE 32 D RING BULL PINION BEARING SNAP 1 33 D CASE ASSY. REAR AXLE DIFFERENTIAL 1 ASSY LH / RH 34 D KIT BOLTS & NUTS CROWN WHEEL PINION 1 94

104 Table - 28 DIFFERENTIAL LOCK COUPLING SHEET : A-1 95

105 Table - 28 DIFFERENTIAL LOCK COUPLING ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D SCREW TRANS. CONNECTOR LOCK 1 2 D NUT 3/8-24 HEX 1 3 D FORK REAR AXLE DIFFERENTIAL LOCK 1 4 D NUT 3/8"-16 HEX 1 5 D SCREW REAR AXLE DIFFERENTIAL LOCK FORK STOP 1 5A D PLUG DIFFERENTIAL LOCK LEVER SHAFT 1 RH REAR AXLE 6 D GREASE NIPPLE 1/4"-28 STRAIGHT FITTING 1 7 D SEAL DIFFERENTIAL LOCK LEVER SHAFT 1 RH REAR AXLE 8 D SHAFT & LEVER ASSY. REAR AXLE 1 DIFFERENTIAL LOCK 9 D PIN 1/8"x0.75" COTTER 2 10 D PIN 5/16"x.76" CLEVIS 1 11 D SPRING PEDAL DIFFERENTIAL LOCK 1 12 D NUT REAR AXLE DIFFERENTIAL LOCK ADJUSTING 1 13 D CLEVIS ASSEMBLY DIFFERENTIAL LOCK 1 14 D LINKAGE ASSEMBLY DIFFERENTIAL LOCK 1 15 D PIN 5/16"x1.24" CLEVIS 1 16 D BUSH DIFFERENTIAL LOCK PEDAL 1 17 D PEDAL ASSEMBLY DIFFERENTIAL LOCK 1 17 D PEDAL ASSY. REAR AXLE DIFFERENTIAL LOCK * 1 18 D BOLT 5/8"-11x2.75" HEX HEAD 1 (DIFFERENTIAL LOCK PEDAL) 19 D WASHER HYDRAULIC LOWER LINK 2 20 D SLEEVE PEDAL DIFFERENTIAL LOCK 1 21 D SHAFT LOWER LINK HYDRAULIC 2 22 D WASHER 5/8" FLAT 4 23 D BOLT 3/8"-16x1.00" HEX HEAD 2 * App. For F , F , F

106 Table - 29 REAR AXLE ASSEMBLY SHEET :

107 Table - 29 REAR AXLE ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BLOCK REAR AXLE DRIVE GEAR THRUST 1 2 D WASHER 3/8" SPRING LOCK 2 3 D BOLT 3/8"-16x1.00" HEX HEAD 2 4 D GASKET REAR AXLE HOUSING AR 4S1 D GASKET REAR AXLE HOUSING TO CENTRE HSG. AR 4S2 D GASKET REAR AXLE HOUSING TO CENTRE HSG. AR 5 D HOUSING ASSEMBLY REAR AXLE RH 1 5A D HOUSING ASSEMBLY REAR AXLE LH 1 6 D PLUG OIL FILLER REAR AXLE 1 7 D GASKET PLUG OIL FILLER REAR AXLE 1 8 D BOLT REAR AXLE HOUSING TO CENTRE HSG D SHIM REAR AXLE SHAFT BRG. RETAINER (0.009") AR 10 D SEAL OIL REAR AXLE SHAFT INNER RH 2 11 D SEAL OIL REAR AXLE SHAFT 2 12 D RETAINER REAR AXLE SEAL 2 13 D SHAFT REAR AXLE (MACHINED) 2 14 D BOLT REAR WHEEL 16 UPTO 9/20/ D BOLT REAR WHEEL 16 FROM 9/21/ D SHAFT AND BOLT ASSEMBLY REAR AXLE 2 16S1 D SHIM REAR AXLE SHAFT BRG. EXTENSION (0.016") AR 16S2 D SHIM REAR AXLE SHAFT BRG. EXTENSION (0.021") AR 16S3 D SHIM REAR AXLE SHAFT BRG. EXTENSION (0.031") AR 16S4 D SHIM REAR AXLE SHAFT BRG. EXTENSION (0.005") AR 16S5 D SHIM REAR AXLE SHAFT BRG. EXTENSION (0.050") AR 17 D SHIM REAR AXLE THRUST BLOCK DRIVE GEAR (0.10MM) 1 98

108 Table - 30 POWER TAKE-OFF ASSEMBLY SHEET :

109 Table - 30 POWER TAKE-OFF ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D SHAFT ASSEMBLY PTO REAR AXLE 1 2 D RING PTO BEARING HOUSING SNAP 1 3 D RING PTO SHAFT BEARING SNAP 1 4 D BEARING BALL PTO SHAFT REAR AXLE 1 5 D GASKET PTO COVER REAR AXLE 1 6 D COVER PTO REAR AXLE 1 7 D BOLT 7/16"-14x1.25" HEX HEAD 4 8 D SLEEVE PTO SHAFT REAR AXLE 1 UPTO 7/8/ D SLEEVE PTO SHAFT REAR AXLE 1 FROM 7/9/ D SEAL OIL PTO SHAFT REAR AXLE 1 10 D CAP PTO SHAFT REAR AXLE 1 11 D BALL TRANS. GEAR HIGH LOW SHIFTING 1 12 D SPRING TRANSMISSION GEAR SHIFT 1 13 D ARM PTO SHIFTER REAR AXLE 1 13 D ARM PTO SHIFTER * 1 14 D FORK PTO SHIFTER REAR AXLE 1 15 D SLEEVE SHAFT PTO REAR AXLE 1 16 D LEVER PTO SHIFTER REAR AXLE 1 16 D LEVER PTO SHIFTER * 1 16A D KNOB TRANS. MAIN GEAR SHIFT LEVER * 1 17 D SEAL O RING 0.103"x0.625" 1 18 D PLATE PTO SHIFTER REAR AXLE 1 18 D PLATE PTO SHIFTER * 1 19 D GASKET PTO SHIFTER PLATE REAR AXLE 1 20 D PIN 1/16"x0.50" COTTER 1 21 D PIN 1/4"x1.00" SPRING DOWEL COMBINATION TYPE 1 22 D BOLT 7/16"-14x1.00" HEX HEAD 3 23 D WASHER 7/16" SPRING LOCK 3 24 D SLEEVE PTO SHIFTER * 1 NI, * App. For F , F , F

110 Table - 31 REAR WHEELS SHEET :

111 Table - 31 REAR WHEELS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D WHEEL ASSY. REAR W12x28" WITHOUT PRIMER 2 2 D TYRE ASSY. REAR WHEEL 13.6x28-12 PLY 2 2 D TYRE ASSY. REAR WHEEL 14.9x28-12 PLY * 2 3 D TUBE ASSEMBLY REAR TYRE 13.6x D TUBE ASSEMBLY REAR TYRE 14.9x28 * 2 4 D NUT REAR WHEEL ASSEMBLY 16 UPTO 9/20/ D NUT REAR WHEEL ASSEMBLY 16 FROM 9/21/ D WASHER WHEEL DISC 16 NI, UPTO 9/20/2006 * App. For F , F , F , F , F

112 Table - 32 BRAKES - MECHANICAL DISC TYPE SHEET :

113 Table - 32 BRAKES - MECHANICAL DISC TYPE ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D CAM SHAFT REAR AXLE BRAKE ACTUATING LH 1 2 D CAM SHAFT BRAKE ACTUATING RH 1 3 D BOOT REAR AXLE BRAKE CAM SHAFT 2 4 D WASHER 5/16" SPRING LOCK 4 5 D BOLT 5/16"-18x0.88" HEX HEAD 4 6 D NUT 7/16"-14HEX 2 7 D KEY 1/4"x1.25" WOODRUFF 2 8 D ARM REAR AXLE BRAKE CAM SHAFT LH 1 9 D ARM BRAKE CAM SHAFT RH 1 10 D BUSHING BRAKE CROSS SHAFT 2 11 D LEVER REAR AXLE BRAKE CAM SHAFT 1 12 D BOLT 7/16"-14x2.50" HEX HEAD 2 13 D CLAMP SPRING WIRE HOSE #26 P 2 14 D RETAINER REAR AXLE BRAKE CAM SHAFT 2 15 D ACTUATOR ASSEMBLY REAR AXLE BRAKE 2 15a D BALL ACTUATING 2 15b D SPRING REAR AXLE BRAKE ACTUATING DISC RETURN 8 15c D ROD PUSH 4 15d D CLIP ROD RETAINING 4 16 D DISC & BRAKE LINING ASSY. REAR AXLE 4 16a D LINING DISC BRAKE FRICTION 4 16b D RIVET BRK FRICTION DISC LINING D SLEEVE BRAKE DISC TO REAR AXLE SHAFT 2 18 D RING SLEEVE BRAKE DISC REAR AXLE RETAINING 2 19 D RING REAR AXLE BRAKE CAMSHAFT SNAP 2 20 D GASKET REAR AXLE BRAKE HOUSING 2 21 D WASHER REAR AXLE BRAKE CAM SHAFT THRUST 2 22 D HOUSING REAR AXLE BRAKE LH 1 23 D HOUSING REAR AXLE BRAKE RH 1 24 D SEAL OIL REAR AXLE SHAFT 2 26 D WASHER DRAIN PLUG 2 27 D WASHER 3/8" FLAT 2 28 D BOLT 3/8"-16x0.75" HEX HEAD 2 104

114 Table - 32 BRAKES - MECHANICAL DISC TYPE SHEET :

115 Table - 32 BRAKES - MECHANICAL DISC TYPE ITEM PART NO. DESCRIPTION QTY REMARKS NO. 29 D NUT 1/2"-13 HEX 2 30 D SCREW REAR AXLE BRAKE ADJUSTING 2 31 D NUT REAR AXLE SHAFT LOCK 2 32 D SEAL OIL BRAKE HSG. OUTER REAR AXLE 2 32a D RING REAR AXLE OIL SEAL RETAINING 2 33 D SPACER REAR AXLE SHAFT 2 34 D BEARING ASSY. REAR AXLE SHAFT OUTER 2 35 D HOUSING REAR AXLE BRAKE OUTER 2 36 D WASHER 1/2" FLAT D BOLT BRAKE HOUSING REAR AXLE D BUSH REAR AXLE OUTER HOUSING 2 39 D SEAL OIL REAR AXLE SHAFT 2 40 D GREASE NIPPLE 1/8"-27 ELBOW FITTING 2 41 D BOLT 9/16"-12X2.09" HEX HEAD BRAKE HSG. INNER 2 42 D BOLT M12x1.5x23.5 PIPE UNION 2 43 D FITTING VENTURI TUBE 2 44 D BOLT M5x0.80x8-6G HEX HEAD 2 45 D WASHER M5 FLAT 2 46 D CLAMP BREATHER TUBE 2 47 D TUBE AND BREATHER ASSEMBLY LH 1 47 D TUBE AND BREATHER ASSEMBLY LH * 1 UPTO 10/9/ D TUBE & BREATHER ASSY. BRAKE VENTILATION LH * 1 FROM 10/10/ D TUBE & BREATHER ASSY. BRAKE VENTILATION LH ** 1 48 D TUBE AND BREATHER ASSEMBLY RH * 1 UPTO 10/9/ D TUBE & BREATHER ASSY. BRAKE VENTILATION RH * 1 FROM 10/10/ D TUBE AND BREATHER ASSEMBLY RH 1 48 D TUBE & BREATHER ASSY. BRAKE VENTILATION RH ** 1 49 D KIT LINING BRAKE DISC SET OF 4 PIECES 2 (FARMTRAC) * ** App. For F App. For F , F , F , F

116 Table - 33 BRAKE CONTROLS SHEET :

117 Table - 33 BRAKE CONTROLS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BRACKET ASSY. PARKING BRAKE PAWL MOUNTING 1 2 D BRACKET PARKING BRAKE CONTROL 1 2 D BRACKET ASSY. PARKING BRAKE CONTROL * 1 3 D BOLT 7/16"-14x0.75 HEX HEAD 2 4 D PEDAL ASSEMBLY REAR AXLE BRAKE LH 1 UPTO 1/22/ D PEDAL ASSEMBLY REAR AXLE BRAKE LH 1 FROM 1/23/ D PEDAL ASSEMBLY REAR AXLE BRAKE LH * 1 5 D HANDLE BRAKE PEDAL INTERLOCK 1 6 D PIN SPRING 1 7 D PEDAL ASSEMBLY REAR AXLE BRAKE RH 1 7 D PEDAL ASSEMBLY REAR AXLE BRAKE RH * 1 8 D LEVER PARKING BRAKE SWITCH ACTUATION * 1 9 D PIN 1/16"x0.50" COTTER 1 10 D PAWL PARKING BRAKE LEVER 1 11 D RING 1/2" RETAINING TYPE RB EXTERNAL 1 12 D WAHSER-1/2" FLAT 3 13 D PAD BRAKE AND CLUTCH PEDAL STOP * 2 14 D BOLT 7/16"-14x1.38" HEX HEAD 1 15 D WASHER BRAKE PEDAL CROSS SHAFT THRUST 2 16 D SPRING BRAKE PEDAL RETURN 2 17 D PIN BRAKE PEDAL RETRACTING SPRING ANCHOR 1 18 D PIN 1/8"x0.75" COTTER 4 19 D RING CLUCH & BRAKE CROSS SHAFT LOCK 1 20 D WASHER BRAKE PEDAL CROSS SHAFT THRUST 1 21 D NUT 3/8-24 HEX 2 22 D CLEVIS 3/8" 2 23 D PIN 3/8"x1.14" CLEVIS 4 24 D GREASE NIPPLE 1/4"-28 STRAIGHT FITTING 1 25 D SEAL ASSEMBLY BRAKE PEDAL SHAFT 2 26 D SHAFT BRAKE PEDAL 1 27 D KEY 1/4"x7/8" WOODRUFF 2 28 D LEVER BRAKE OPERATING LH 1 29 D BOLT 7/16"-14X1.50" HEX HEAD 1 30 D ROD AND CLEVIS ASSY. BRAKE CONTROL 2 31 D ROD ASSEMBLY PARKING BRAKE 1 31 D ROD ASSY. PARKING BRAKE PAWL CONTROL * 1 32 D KIT BUSH BRAKE PEDAL SHAFT SET 1 * App. For F , F , F

118 Table - 34 HYDRAULIC LIFT COVER SHEET :

119 Table - 34 HYDRAULIC LIFT COVER ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D GASKET HYDRAULIC LIFT HOUSING 1 2 D PLUNGER HYD. LIFT DRAFT CONTROL 1 3 D SEAT DRAFT CONTROL SPRING HOUSING 1 4 D SHIM HYD. LIFT DRAFT CONTROL (0.0150") AR 4S1 D SHIM HYD. LIFT DRAFT CONTROL (0.0200") AR 4S2 D SHIM HYD. LIFT DRAFT CONTROL (0.0250") AR 5 D SPRING HYD. LIFT DRAFT CONTROL 1 6 D SEAT HYD. LIFT DRAFT CONTROL SPRING 1 7 D HOUSING HYD. LIFT DRAFT CONT. SPRING 1 8 D WASHER 3/8" SPRING LOCK 3 9 D BOLT CENTRE HOUSING VENTILLATION 1 10 D YOKE HYDRAULIC LIFT 1 11 D BOOT HYDRAULIC LIFT YOKE 1 12 D BOLT 7/16"-14x2.88" HEX HEAD 2 13 D PLUG HYDRAULIC LIFT CHECK VALVE 1 14 D SEAL O RING 0.364"x0.066" (HYD. LIFT ACCESS COVER) 2 15 D SEAL O RING 0.066"x0.489" (HYD. LIFT ACCESS COVER) 2 16 D RETAINER HYDRAULIC LIFT CHECK VALVE 1 17 D SEAL O RING 0.103"x0.625" 1 18 D SPRING HYDRAULIC LIFT CHECK VALVE 1 19 D BALL 15/32" DIAMETER 1 20 D SEAT HYDRAULIC LIFT CHECK VALVE 1 21 D SLEEVE HYD. LIFT CHECK VALVE SEAT 1 22 D SEAL 9/16" OIL PASSAGE PLUG 1 23 D BOLT 7/16"-14X1.50" HEX HEAD 3 24 D BOLT 7/16"-20x1.75" HEX HEAD 3 25 D BOLT 7/16"-14x2.00" HEX HEAD 1 26 D BOLT 7/16"-14x3.25" HEX HEAD 4 27 D BOLT 7/16"-14x3.50" HEX HEAD 5 28 D SEAL O RING 0.070"x0.625" (S95 FINISH) 1 29 D PIN HYDRAULIC LIFT PLUNGER GUIDE 1 30 D GASKET HYDRAULIC LIFT ASSEMBLY 1 31 D BOLT 5/16"-18x1.50" HEX HEAD 1 32 D SEAL O RING 0.103"x0.562" 5 33 D SEAL O RING 0.103"x0.812" 1 110

120 Table - 34 HYDRAULIC LIFT COVER SHEET :

121 Table - 34 HYDRAULIC LIFT COVER ITEM PART NO. DESCRIPTION QTY REMARKS NO. 34 D SEAL O RING 0.070"x0.440" 1 35 D SEAL O RING 0.070"x0.500" 1 36 D BOLT 7/16"-14x1.38" HEX HEAD 2 37 D COVER HYDRAULIC LIFT ACCESSORY 1 38 D GASKET HYD. LIFT QUADRANT COVER 1 38A D COVER ASSEMBLY HYDRAULIC LIFT 1 38A D COVER ASSEMBLY HYDRAULIC LIFT 1 For Heavy Duty 38B D COVER HYDRAULIC LIFT 1 39 D SHAFT HYDRAULIC LIFT CONTROL LEVER 1 40 D SHAFT ASSY. HYD. LIFT DRAFT CONT. SELECTOR 1 41 D WASHER 3/8" SPRING LOCK 2 42 D BOLT 7/16"-14x1.00" HEX HEAD 2 43 D SUPPORT HYD. LIFT CONTROL QUADRANT 1 44 D SPACER HYDRAULIC LIFT CONTROL LEVER AR 45 D WASHER 7/16" SPRING LOCK 2 46 D BOLT 3/8"-16x1.25" HEX HEAD 2 47 D DISC HYDRAULIC LIFT CONTROL FRICTION 2 48 D HANDLE ASSY. HYD. LIFT POSITION CONT D WASHER HYD. LIFT CONTROL SHAFT CUP 1 50 D WASHER HYD. LIFT CONTROL SPRING 1 51 D NUT 7/16"-20 HEX LOCK 1 52 D PLATE HYD. LIFT CONTROL FRICTION 1 53 D NUT 1/4"-20 TEE 1 54 D KNOB HYD. REMOTE CONTROL VALVE HANDLE 2 55 D QUADRANT ASSY. HYD. LIFT CONTROL 1 56 D STOP HYDRAULIC LIFT CONTROL LEVER 1 57 D KNOB HYD. LIFT CONTROL LEVER STOP 1 58 D BOLT 1/4"-20x0.50" HEX HEAD 2 59 D HANDLE ASSY. HYD. LIFT DRAFT CONTROL 1 60 D BOLT 9/16"-18x0.62" HEX HEAD 1 61 D HYDRAULIC LIFT ASSEMBLY 1 NI, 61 D HYDRAULIC LIFT ASSY. DISC BRAKE * 1 NI, * App. For F , F , F , F , F

122 Table - 35 HYDRAULIC LIFT CYLINDER SHEET :

123 Table - 35 HYDRAULIC LIFT CYLINDER ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BOLT 5/16"-18X0.75" HEX HEAD FLANGED 3 2 D PLATE HYD. LIFT VALVE RETAINER REAR 1 3 D RING HYDRAULIC CYLINDER DOWEL 2 4 D VALVE ASSEMBLY HYDRAULIC LIFT SAFETY 1 5 D GASKET HYDRAULIC LIFT SAFETY VALVE 1 6 D PLUG 1/8"-27 SOCKET HEX HEAD (STEEL) 4 7 D BUSHING HYD. LIFT UNLOADING VALVE REAR 1 8 D SEAL O RING 0.070"X0.500" 1 9 D VALVE HYDRAULIC LIFT UNLOAD 1 10 D SPRING HYDRAULIC LIFT UNLOAD VALVE 1 11 D SEAL O RING 0.070"X0.562" 2 12 D PLUG HYDRAULIC LIFT UNLOAD VALVE 1 13 D VALVE HYDRAULIC LIFT CONTROL 1 14 D SPRING HYDRAULIC LIFT CONTROL VALVE 1 15 D BUSHING HYD. LIFT CONTROL VALVE 1 16 D PLUG HYDRAULIC LIFT VALVE BLOCK 1 17 D SEAL O RING 0.070"X0.440" 1 18 D SPRING HYD. LIFT FLOW CONTROL VALVE 1 19 D SPOOL HYD. LIFT PUMP FLOW CONTROL VALVE 1 20 D BUSHING HYD. LIFT FLOW CONTROL 1 21 D SEAL O RING 0.070"X0.500" 2 22 D PLUG HYDRAULIC LIFT VALVE BLOCK 1 23 D CYLINDER WITH VALVE ASSY. & PISTON 1 ASSEMBLY HYDRAULIC LIFT 23 D CYLINDER WITH VALVE ASSY. & PISTON 1 FOR HEAVY DUTY ASSEMBLY HYDRAULIC LIFT 24 D SLEEVE HYDRAULIC LIFT CONTROL VALVE 1 NI 114

124 Table - 36 HYDRAULIC LIFT SHAFTS SHEET :

125 Table - 36 HYDRAULIC LIFT SHAFTS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D ARM HYDRAULIC LIFT RH 1 1 D ARM HYDRAULIC LIFT RH 1 For Heavy Duty 2 D BUSH HYDRAULIC LIFT POWER ARM 4 2 D BUSH HYDRAULIC LIFT POWER ARM 4 For Heavy Duty 3 D SHAFT HYDRAULIC LIFT 1 3 D SHAFT HYDRAULIC LIFT 1 For Heavy Duty 4 D ARM HYDRAULIC LIFT RAM 1 4 D ARM HYDRAULIC LIFT RAM 1 For Heavy Duty 5 D BUSHING HYDRAULIC LIFT SHAFT 2 5 D BUSHING HYDRAULIC LIFT SHAFT 2 For Heavy Duty 6 D BUSHING HYDRAULIC LIFT SHAFT 2 6 D BUSHING HYDRAULIC LIFT SHAFT 2 For Heavy Duty 7 D SEAL O RING 0.210"x2.000" 2 8 D ARM HYDRAULIC LIFT LH 1 8 D ARM HYDRAULIC LIFT LH 1 For Heavy Duty 9 D BOLT 1/2"-20X1.00" HEX HEAD 2 10 D WASHER SHAFT HYDRAULIC LIFT LOCK 2 11 D WASHER SHAFT HYDRAULIC LIFT 2 For Heavy Duty 11 D WASHER SHAFT HYDRAULIC LIFT 2 12 D RING 3/8" RETAINING TYPE RC EXTERNAL 1 13 D ROLLER HYD. LIFT POSITION CAM FOLLOWER 1 14 D SHAFT ASSY. HYD. LIFT DRAFT CONT. SELECTOR 1 15 D LEVER & ROLLER ASSY HYD. LIFT CONT D PIN 1/8"x0.50" COTTER 1 17 D PIN 5/16"x2.00" CLEVIS 1 18 D RING 1" RETAINING TYPE RC EXTERNAL 1 19 D ROD HYDRAULIC LIFT CONNECTING 1 19 D ROD HYDRAULIC LIFT CONNECTING 1 For Heavy Duty 20 D PISTON HYDRAULIC LIFT CYLINDER 1 20 D PISTON HYDRAULIC LIFT CYLINDER 1 For Heavy Duty 21 D SEAL O RING HYDRAULIC LIFT PISTON 1 21 D SEAL O RING HYDRAULIC LIFT PISTON 1 For Heavy Duty 22 D RING HYD. LIFT PISTON SEAL BACKUP 1 22 D RING HYD. LIFT PISTON SEAL BACKUP 1 For Heavy Duty 22A D WASHER HYDRAULIC LIFT SHAFT THRUST 1 22A D WASHER HYDRAULIC LIFT SHAFT THRUST 1 For Heavy Duty 116

126 Table - 36 HYDRAULIC LIFT SHAFTS SHEET :

127 Table - 36 HYDRAULIC LIFT SHAFTS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 23 D BOLT 5/16"-18X0.75" HEX HEAD FLANGED 3 24 D BAFFLE HYDRAULIC LIFT CYL. OIL OUTER 1 24 D BAFFLE HYDRAULIC LIFT CYL. OIL OUTER 1 For Heavy Duty 25 D SEAL O RING 0.070"x0.440" 1 26 D SEAL O RING 0.070"x0.500" 4 27 D CYLINDER WITH VALVE ASSY. AND 1 PISTON ASSY. HYDRAULIC LIFT 27 D CYLINDER AND VALVE ASSEMBLY 1 For Heavy Duty WITH PISTION ASSEMBLY HYDRAULIC LIFT 28 D PLATE HYD. LIFT VALVE RETAINER REAR 1 29 D WASHER HYDRAULIC LIFT SHAFT THRUST 1 30 D SHAFT HYDRAULIC LIFT CONTROL LEVER 1 31 D PIN 1/8"x0.75" SPRING ROLL 1 32 D PIN 3/8"x1.656" CLEVIS 1 33 D LEVER HYDRAULIC LIFT CONTROL 1 34 D PIN 1/8"x0.75" COTTER 1 35 D LINK HYD. LIFT DRAFT CONTROL CONNECTER 1 35A D LEVER HYDRAULIC LIFT DRAFT CONTROL 1 35B D PIN HYDRAULIC LIFT ACUATOR PIVOT 1 36 D LEVER HYDRAULIC LIFT CONTROL VALVE 1 36 D LEVER ASSY. HYD. LIFT CONTROL VALVE 1 For Heavy Duty 37 D PIN HYDRAULIC LIFT ACTUATOR PIVOT 1 38 D RING 7/16" RETAINING TYPE RC EXTERNAL 2 39 D ROLLER HYD. LIFT POSITION CAM FOLLOWER 1 40 D LEVER HYD. LIFT CONTROL VALVE ACTUATING 1 41 D WASHER 7/16" SPRING LOCK 1 42 D NUT 3/8"-16 HEX 1 43 D RING 1/2" RETAINING TYPE RB EXTERNAL 2 44 D PIN HYDRAULIC LIFT ACTUATOR PIVOT 1 45 D SPRING HYDRAULIC LIFT CONTROL VALVE 1 46 D SHAFT HYDRAULIC LIFT CONTROL LEVER 1 47 D ACTUATOR HYDRAULIC LIFT VALVE 1 48 D RING 5/16" RETAINING TYPE RB EXTERNAL 1 49 D KIT HYDRAULIC SHAFT BUSHES 1 50 D LEVER 1 NI, For Heavy Duty 118

128 Table - 37 HYDRAULIC FLOW SYSTEM SHEET :

129 Table - 37 HYDRAULIC FLOW SYSTEM ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D SEAL O RING 0.070"x0.500" 2 2 D FILTER & PIPE ASSY. HYD. LIFT OIL INTAKE 1 3 D SPACER HYDRAULIC LIFT OIL RETURN 1 4 D SEAL O RING 0.070"x0.440" 1 5 D RETAINER HYDRAULIC LIFT OIL RETURN 2 6 D TUBE ASSEMBLY HYDRAULIC OIL RETURN 1 7 D NUT HYD. PUMP RELIEF VALVE BAFFLE 1 8 D TUBE & BRACKET ASSY. HYD. LIFT RELIEF VALVE 1 9 D SEAL O RING 0.070"x0.500" 2 10 D TUBE ASSEMBLY HYD. LIFT PRESSURE 1 11 D RING TUBE HYD. LIFT PRESSURE SNAP 1 12 D SEAL 5/16" DIAMETER HYD. OIL RETURN 1 13 D BOLT 5/16"-24x1.125" HEX HEAD 1 120

130 Table - 38 HYDRAULIC LIFT LINKAGES SHEET :

131 Table - 38 HYDRAULIC LIFT LINKAGES ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D ROD ASSEMBLY HYD. LIFT LEVELLING LH 1 2 D PIN LOWER LINK TO HYDRAULIC LIFT 1 2 D PIN HYDRAULIC LIFT 2 App. For F , F , F D KNUCKLE HYD. LIFT LEVELLING ROD 2 4 D PIN 1/8"x1.00" COTTER 2 5 D GREASE NIPPLE 1/4"-28 STRAIGHT FITTING 1 6 D PIN 3/16"x1.25" COTTER 2 7 D WASHER PIN ROCKER HYDRAULIC LIFT 2 8 D ROCKER HYDRAULIC LIFT 1 9 D PIN HYDRAULIC LIFT ROCKER 1 10 D BUSH ROCKER HYDRAULIC LIFT 1 11 D NUT 7/16"-20 NYLOCK 2 12 D WASHER 0.43" FLAT 2 13 D PIN HYDRAULIC LIFT LEVELLING FORK 2 14 D SHAFT LOWER LINK HYDRAULIC 2 15 D LINK ASSEMBLY HYD. LOWER LIFT LH 1 16 D PIN 15.6x76.2 CLEVIS (HYD. LIFT LEVELLING ROD) 2 17 D PLUG 1.75" EXPANSION 1 18 D SHAFT HYDRAULIC LIFT LEVELING GEAR 1 19 D LEVER HYDRAULIC LIFT LEVELLING 1 20 D WASHER 1/2" SPRING DISC 1 21 D GREASE NIPPLE B M D FORK HYDRAULIC LIFT LEVELLING ROD 1 23 D GEAR HYDRAULIC LIFT LEVELING LEVER 1 24 D BOX ASSEMBLY HYD. LIFT LEVELLING 1 25 D LINK ASSEMBLY HYDRAULIC UPPER LIFT 1 ASSY 25A D PIN LINCH LOCKING ASSEMBLY 1 26 D CHAIN ASSEMBLY DRAWBAR LINK CHECK 2 27 D CLEVIS ASSY. LOWER LIFT LINK CHECK CHAIN 4 28 D PIN AND RING ASSEMBLY 3 28A D PIN DRAWBAR UPPER LINK 1 29 D PIN 1.0"x4.0" CLEVIS (HYD. LIFT UPPER LINK) 1 122

132 Table - 38 HYDRAULIC LIFT LINKAGES SHEET :

133 Table - 38 HYDRAULIC LIFT LINKAGES ITEM PART NO. DESCRIPTION QTY REMARKS NO. 30 D PIN 1/8"x.875" COTTER 4 31 D ANCHOR CHECK CHAIN LH 1 32 D ANCHOR CHECK CHAIN RH 1 33 D BOLT 7/16"-14x1.38" HEX HEAD 4 33A D PIN 3/8"x1.68" CLEVIS 4 34 D WASHER 7/16" SPRING LOCK 4 35 D LINK ASSEMBLY HYD. LOWER LIFT RH 1 36 D WASHER HYDRAULIC LOWER LINK 4 NI 37 D SPRING HYD. LIFT LEVELLING LEVER 1 NI 124

134 Table - 39 HYD PUMP (FRONT MOUNTED) SHEET :

135 Table - 39 HYD PUMP (FRONT MOUNTED) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D BOLT M6x1.00x25-6G HEX HEAD 2 App. For F D BOLT M6x1.00x25-6G HEX HEAD 2 UPTO T D BOLT M6x1.0x20-6G HEX HEAD 2 FROM T D BRACKET HYD. PUMP PIPE SUPPORT 1 3 D SEAL O RING 0.087"x0.644" 1 4 D GROMMET HYDRAULIC PUMP INLET PIPE 1 5 D BRACKET HYDRAULIC PUMP INLET PIPE 1 6 D ELBOW 3/4"-16 HIGH PRESSURE TUBE FITTING 1 7 D TUBE PRESSURE HOUSING TO FILTER 1 8 D GROMMET HYDRAULIC PUMP INLET PIPE 1 9 D BRACKET HYDRAULIC PUMP INLET PIPE 1 10 D SEAL O RING 0.139"x1.250" 1 11 D ELBOW HYDRAULIC PUMP INLET 1 12 D FLANGE HYD. LIFT INLET TUBE HOSING 1 App. For F , F , F D FLANGE HYD. LIFT INLET TUBE HOSING 1 UPTO T D SEAL O RING 0.139"x1.125" 1 14 D FILTER ASSEMBLY HYD. LIFT OIL INTAKE 1 15 D ADAPTOR OIL FILTER 1 16 D ADAPTER HYDRAULIC OIL FILTER 1 App. For F D ADAPTER HYDRAULIC OIL FILTER 1 UPTO T D ADOPTER HYDRAULIC OIL FILTER 1 FROM T D SEAL O RING HYDRAULIC LIFT PUMP 2 18 D WASHER 3/8" SPRING LOCK 2 19 D SCREW M12x1.75x HEX HEAD 2 20 D TUBE ASSY. INLET HOUSING TO ADAPTOR 1 App. For F D TUBE ASSY. INLET HOUSING TO ADAPTOR 1 UPTO T D TUBE ASSY. INLET HOUSING TO ADAPTOR 1 FROM T D SEAL O RING 0.139"x1.125" 1 22 D BRACKET ASSEMBLY ADAPTOR MOUNTING 1 App. For F D BRACKET ASSEMBLY ADAPTOR MOUNTING 1 UPTO T D BRACKET FILTER ADAPTER MOUNTING 1 FROM T D BOLT M12x1.75x30-6G HEX HEAD 5 126

136 Table - 39 HYD PUMP (FRONT MOUNTED) SHEET :

137 Table - 39 HYD PUMP (FRONT MOUNTED) ITEM PART NO. DESCRIPTION QTY REMARKS NO. 24 D WASHER M8 SPRING LOCK 4 25 D BOLT M8x1.25x30 HEX HEAD 4 26 D TUBE ASSEMBLY INLET FILTER TO PUMP 1 UPTO 9/12/ D TUBE ASSEMBLY INLET FILTER TO PUMP 1 App. For F D TUBE ASSEMBLY INLET FILTER TO PUMP 1 UPTO 11/24/ D TUBE ASSEMBLY INLET FILTER TO PUMP 1 FROM 11/25/ D CLAMP ASSEMBLY RADIATOR HOSE UPPER 2 28 D HOSE HYDRAULIC LIFT PUMP INLET TUBE 1 29 D TUBE ASSY. INLET HYD. PUMP TO FILTER * 1 29 D TUBE ASSY. INLET HYD. PUMP TO FILTER 1 UPTO 11/24/ D TUBE ASSEMBLY INLET PUMP TO FILTER 1 FROM 11/25/ D BOLT M8x1.25x45-8.8P HEX HEAD 4 31 D WASHER M8 SPRING LOCK 4 32 D SEAL O RING 0.103"x0.875" 1 33 D PUMP ASSEMBLY HYDRAULIC 1 34 D SEAL POWER STEERING PUMP 1 35 D BOLT 3/8"-16x2.50" HEX HEAD 2 36 D GEAR POWER STEERING PUMP DRIVE 1 37 D SEAL O RING 0.103"x0.625" 1 38 D GASKET HYDRAULIC PUMP 1 39 D TUBE ASSY. PRESSURE PUMP TO FILTER * 1 39 D TUBE ASSY. PRESSURE PUMP TO FILTER 1 UPTO 11/24/ D TUBE ASSY. PRESSURE PUMP TO TUBE 1 FROM 11/25/ D BOLT M6x1.00x35-6G HEX HEAD 2 41 D VALVE ASSEMBLY HYD. LIFT PUMP RELIEF 1 * App. For F , F , F

138 Table - 40 HYD PUMP SHEET :

139 Table - 40 HYD PUMP ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D PUMP ASSEMBLY HYDRAULIC LIFT OIL 1 UPTO 9/22/ D PUMP ASSEMBLY HYDRAULIC 9GPM 1 FROM 9/23/ D ADAPTOR OIL FILTER 1 3 D FILTER ASSEMBLY HYD. LIFT OIL INTAKE 1 4 D BOLT 3/8"-16x1.50" HEX HEAD 4 5 D WASHER 3/8" SPRING LOCK 4 6 D BOLT 3/8"-16x2.38" HEX HEAD 2 7 D GASKET HYDRAULIC PUMP 1 8 D SEAL O RING 0.087"x0.644" 2 9 D CONNECTER 1/2" FLX 3/4"-16 STRAIGHT THREAD 1 10 D GROMMET HYDRAULIC PUMP INLET PIPE 1 11 D SEAL O RING 0.139"x1.125" 1 12 D TUBE ASSEMBLY HYDRAULIC PUMP INLET 1 13 D BRACKET HYD. PUMP PIPE SUPPORT 1 14 D BRACKET HYDRAULIC PUMP INLET PIPE 1 15 D BOLT 3/8"-16x1.00" HEX HEAD 1 16 D WASHER 3/8" SPRING LOCK 2 17 D BRACKET HYDRAULIC PUMP INLET PIPE 1 18 D GROMMET HYDRAULIC PUMP INLET PIPE 1 19 D TUBE ASSY HYD PUMP PRESSURE-CDS 1 20 D VALVE ASSEMBLY HYD. LIFT PUMP RELIEF 1 21 D SEAL O RING 1 22 D SEAL O RING 1 23 D SEAL O RING 1 24 D SEAL O RING 0.139"x1.250" 1 25 D ELBOW HYDRAULIC PUMP INLET 1 26 D ELBOW 3/4"-16 HIGH PRESSURE TUBE FITTING 1 NI 27 D SEAL O RING 0.103"x0.437" 1 NI 28 D KIT REPAIR HYDRAULIC PUMP UT 1 KIT Applicable For F

140 Table - 41 ALTERNATOR ASSEMBLY AND GUARDS SHEET :

141 Table - 41 ALTERNATOR ASSEMBLY AND GUARDS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D GUARD ASSY ALTERNATOR FAN GUARD LH 1 2 D NUT RADIATOR GRILL MOUNTING 4 3 D BOLT 7/16"-14x3.00" HEX HEAD 1 4 D WASHER 7/16" FLAT 1 5 D ARM ALTERNATOR BELT 1 6 D ALTERNATOR ASSEMBLY 35 AMPERE 1 7 D WASHER 1/4" FLAT 1 8 D BOLT 1/4"-28x0.62" HEX HEAD 1 9 D WASHER M5 FLAT 4 10 D SCREW TAPPING #10-16x1.25" CROSS 4 RECESSED PAN HEAD 11 D NUT M10x HEX 1 12 D WASHER 3/8" FLAT 2 13 D WASHER M10 FLAT 1 15 D BOLT M8x1.25x30 HEX HEAD 1 16 D WASHER M8 FLAT 2 14 D BRACKET ASSEMBLY ALTERNATOR 1 17 D BRACKET ALTERNATOR MOUNTING 1 18 D BOLT M10x1.50x90-6G HEX HEAD 1 19 D BELT DRIVE COGGED 1 20 D BOLT 3/8"-16x0.875" HEX HEAD LOCK (GRADE-8) 2 21 D STARTER MOTOR DRIVE AND RELAY ASSY 1 22 D GASKET STARTER MOTOR` 1 23 D GUARD ASSY. ALTERNATOR FAN GUARD RH 1 App. For F , F , F

142 Table - 42 BATTERY AND BATTERY SUPPORT SHEET :

143 Table - 42 BATTERY AND BATTERY SUPPORT ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D NUT 5/16'-18 HEX LOCK 2 2 D WASHER 5/16" FLAT 2 3 D CLAMP BATTERY HOLD DOWN 1 4 D NUT 5/16"-18 HEX 2 5 D CABLE ASSY. BATTERY TO STARTER GROUND 1 6 D CABLE ASSY. BATTERY TO STARTER SOLENOID 1 7 D ROD BATTERY HOLD DOWN 2 UPTO TR No.T D ROD BATTERY HOLD DOWN 2 FROM TR No.T D TRAY ASSEMBLY BATTERY *** 1 UPTO 11/24/ D TRAY ASSEMBLY BATTERY *** 1 FROM 11/25/ D TRAY ASSEMBLY BATTERY 1 UPTO 5/5/ D TRAY ASSEMBLY BATTERY 1 FROM 5/6/ D PIN 5/32"x1.25" COTTER 2 10 D PIN BATTERY TRAY 1 11 D BOLT 7/16"-14x0.75 HEX HEAD 6 12 D WASHER 7/16" SPRING LOCK 6 13 D BRACKET ASSY. BATTERY SUPPORT REAR 1 UPTO 11/24/ D BRACKET ASSEMBLY BATTERY TRAY 1 FROM 11/25/ D BRACKET ASSY. BATTERY SUPPORT REAR * 1 14 D CLIP BATTERY CABLE 2 15 D PAD BATTERY TRAY SUPPORT 1 16 D BATTERY ASSY. MAINTENANCE FREE TYPE 12V 88AH 1 UPTO TR No.T D BATTERY ASSY. MAINTENANCE FREE TYPE 1 FROM TR No.T V 88AH (MHD LOW HIGHT) 17 D NUT 5/16"-18 WING 1 18 D WASHER 5/16" FLAT 1 19 D BOLT BATTERY TRAY HOLD DOWN 1 20 D SUPPORT RADIATOR SHELL 1 UPTO 11/24/ D SUPPORT RADIATOR SHELL UPPER 1 FROM 11/25/ D SUPPORT RADIATOR SHELL UPPER ** 1 UPTO 10/18/ D SUPPORT ASSY. RADIATOR SHELL UPPER ** 1 FROM 10/19/ D SUPPORT RADIATOR SHELL * 1 20 D SUPPORT ASSY. RADIATOR SHELL UPPER 1 App. For F * App. For F , F , F , F , F , F App. For F , F Applicable For F ** *** 134

144 Table - 43 ELECTRICAL SWITCHES AND CONTROLS SHEET :

145 Table - 43 ELECTRICAL SWITCHES AND CONTROLS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D KEY IGNITION LOCK 1 2 D SWITCH ASSEMBLY HEATER AND STARTER 1 2 D SWITCH ASSEMBLY HEATER & STARTER * 1 UPTO 8/17/ D SWITCH ASSEMBLY HEATER & STARTER * 1 FROM 8/18/ D HORN AND BRACKET ASSEMBLY 1 4 D BOLT M8x1.25x HEX HEAD 2 5 D SWITCH ASSEMBLY LIGHTING 1 5 D SWITCH ASSEMBLY LIGHTING * 1 6 D KNOB LIGHT SWITCH 1 7 D SWITCH ASSEMBLY HORN BLOWING 1 7 D SWITCH ASSEMBLY PARKING LAMP ** 1 7A D GROMMET 0.53x0.75 ROUND FLANGE 1 7A D GROMMET 0.53x0.75 ROUND FLANGE 3 FROM 12/19/ D SWITCH & WIRE ASSY. EMERGENCY *** 1 8 D SWITCH AND WIRE ASSEMBLY EMERGENCY 1 UPTO 5/14/ D SWITCH ASSEMBLY EMERGENCY WARNING 1 UPTO T D SWITCH ASSY EMERGENCY WARNING 1 FROM T WITH DUST COVER & SEALED 9 D SWITCH ASSEMBLY TURN SIGNAL 1 UPTO T D SWITCH ASSEMBLY TURN SIGNAL WITH 1 FROM T DUST COVER AND SEALED 10 D COVER SWITCH ASSEMBLY 1 11 D SCREW M6x1.00x HEX HEAD 2 12 D BOX ASSEMBLY FUSE *** 1 12 D BOX ASSEMBLY FUSE 1 UPTO 1/17/ D WIRE ASSEMBLY FUSE BOX 1 FROM 1/18/ D SWITCH ASSEMBLY STOP LAMP 1 App. For F , F , F * ** *** Applicable For F App. For F , F , F App. For F

146 Table - 43 ELECTRICAL SWITCHES AND CONTROLS SHEET :

147 Table - 43 ELECTRICAL SWITCHES AND CONTROLS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 13 D SWITCH ASSEMBLY STOP LAMP 1 UPTO 1/22/ D SWITCH ASSEMBLY STOP LAMP 1 FROM 1/23/ D FLASHER ASSEMBLY INDICATOR 1 15 D LAMP ASSEMBLY WARNING INDICATOR *** 1 16 D INDICATOR DRY AIR CLEANER 1 App. For F D SWITCH ASSEMBLY COMBINATION ** 1 17A D BRACKET ASSEMBLY TRAILOR SOCKET 1 FROM T D GROMMET COMBINATION SWITCH 1 19 D SWITCH ASSEMBLY OIL PRESSURE * 1 FOR ONLY 20 D NUT #10-24 HEX 4 21 D WASHER #10 SPRING LOCK 4 22 D SCREW #10-24x0.62" PAN HEAD 4 23 D SOCKET ASSY. TRAILER ELECTRICAL 1 23 D COVER FUSE BOX 1 NI App. For F , F D BRACKET FUSE BOX MOUNTING ** 1 NI 25 D WASHER FUSE JUCTION CHANNEL MOTG. 2 NI 26 D GROMMET 1 NI * ** *** App. For F , F , F , F , F , F App. For F , F , F App. For F

148 Table - 44 INSTRUMENTS AND GAUGES SHEET : A-3 139

149 Table - 44 INSTRUMENTS AND GAUGES ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D WASHER OIL PRESSURE GAUGE TUBE 3 2 D ADAPTER OIL PRESSURE GAUGE 1 3 D TUBE ASSY. OIL PRESSURE GAUGE *** 1 4 D BOLT M10x1.0x18.5 PIPE UNION 1 5 D CABLE ASSEMBLY TACHOMETER * 1 UPTO D ADAPTER TACHOMETER DRIVE ** 1 UPTO D GASKET INSTRUMENT CLUSTER 1 8 D NUT INSTRUMENT CLUSTER RETAINING 4 9 D GAUGE ASSY. WATER TEMPERATURE *** 1 UPTO D GAUGE ASSY. LUBE OIL PRESSURE *** 1 UPTO D TACHOMETER ASSEMBLY *** 1 UPTO D SCREW INSTRUMENT CLUSTER 4 13 D CLUSTER ASSY. INSTRUMENT 3 GAUGE (MINDA) 1 UPTO 1/3/ D CLUSTER ASSEMBLY INSTRUMENT 1 FROM 1/4/ D BEZEL INSTRUMENT CLUSTER *** 1 UPTO 1/3/ D TRANSDUCER OIL PRESSURE GAUGE 1 App. For F D SENSOR UNIT WATER TEMPERATURE GAUGE 1 16 D SCREW #10-32x0.625" HEX HEAD 5 FROM 11/25/ D WASHER FUEL TANK FLOAT 5 FROM 11/25/ D GASKET FUEL TANK SENDER 1 FROM 11/25/ D FLOAT ASSEMBLY FUEL TANK 1 FROM 11/25/ D FLOAT ASSEMBLY FUEL TANK 1 App. For F , F , F D CLIP OIL PRESSURE GAUGE TUBE 1 NI 21 D BUSH TACHOMETER DRIVE CABLE 1 NI, App. For F F * ** *** App. For F , F , F , F , F , F App. For F , F , F App. For F

150 Table - 45 WIRING HARNESS SYSTEM SHEET :

151 Table - 45 WIRING HARNESS SYSTEM ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D HARNESS ASSEMBLY MAIN * 1 1 D HARNESS ASSEMBLY MAIN 1 UPTO 11/24/ D HARNESS ASSEMBLY ELECTRICAL MAIN 1 FROM 11/25/ D HARNESS ASSY. DASH BOARD TO RUNNING BOARD 1 FROM 5/19/ D HARNESS ASSY. DASH BOARD TO RUNNING BOARD 1 UPTO 11/24/ D HARNESS INSTRUMENT PANEL TO RUNNING BOARD 1 FROM 11/25/ D HARNESS INSTRUMENT PANEL 1 FROM 1/4/ D HARNESS ASSEMBLY DASH BOARD* 1 3 D HARNESS ASSEMBLY DASH BOARD 1 UPTO 1/3/ D HARNESS ADOPTER DASH BOARD TO 1 FROM 1/4/2006 INSTRUMENT CLUSTER 4 D HARNESS ASSEMBLY FENDER LH 1 UPTO 11/24/ D HARNESS ASSEMBLY REAR FENDER LH 1 FROM 11/25/ D HARNESS ASSEMBLY FENDER RH 1 UPTO 11/24/ D HARNESS ASSEMBLY REAR FENDER RH 1 FROM 11/25/ D HARNESS SAFETY START SWITCH TO DASH BOARD 1 7 D WIRE ASSEMBLY GROUND 1 UPTO 5/18/ D WIRE ASSEMBLY GROUND 1 FROM 5/19/ D HARNESS ASSEMBLY TRANSMISSION 1 9 D WIRE ASSEMBLY INSTRUMENT LAMP 1 10 D BOLT M10x1.50x25-6G HEX HEAD 8 NI, FROM 11/25/ D HARNESS PARKING BRAKE EARTH ** 1 NI, 12 D HARNESS ASSEMBLY TRAILER SOCKET 1 NI, FROMT D WIRE ASSEMBLY TEMPERATURE SENSOR 1 NI, FROM 11/25/2006 * ** App. For F App. ForF , F , F

152 Table - 46 HEAD LIGHT AND PLOUGH LAMP SHEET :

153 Table - 46 HEAD LIGHT AND PLOUGH LAMP ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D HEAD LAMP ASSEMBLY RH 2 UPTO 9/14/ D HEAD LAMP ASSEMBLY RH 2 FROM 9/15/ D HEAD LAMP ASSEMBLY LH 2 UPTO 9/14/ D HEAD LAMP ASSEMBLY LH 2 FROM 9/15/ D HEAD LAMP ASSEMBLY LH TRAFFIC 2 App. For F D LAMP ASSEMBLY PLOUGH 1 3 D LAMP ASSEMBLY PLOUGH ** 1 4 D BOLT 3/8"-24x0.87" DRIVER SEAT HINGE TO SPRING 2 5 D WASHER 3/8" FLAT 2 5A D PAD PLOUGH LAMP ** 2 6 D PLATE PLOUGH LAMP 1 7 D NUT 3/8"-24 HEX 2 8 D LAMP ASSEMBLY PARKING LH 1 9 D LAMP ASSEMBLY PARKING RH 1 10 D LAMP ASSEMBLY FENDER REAR LH 1 11 D LAMP ASSEMBLY FENDER REAR RH 1 13 D LAMP ASSEMBLY TURN INDICATOR * 2 NI, FROM 10/11/ D LAMP ASSEMBLY HIGH BEAM INDICATOR * 1 NI, FROM 10/11/2004 * ** App. For F , App. ForF , F , F

154 Table - 47 SHEET METAL SHEET : A

155 Table - 47 SHEET METAL ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D PANEL ASSEMBLY HOOD REAR * 1 1 D PANEL ASSEMBLY HOOD REAR 1 UPTO T D PANEL ASSY. HOOD REAR (US EXPORT) 1 FROM T D PAD HOOD MOUNTING 23 3 D BOLT 5/16"-18x0.88" HEX HEAD 2 4 D CLIP HOOD TOP SUPPORT ROD 1 4A D WASHER 1/4" FLAT 4 4B D NUT M4x0.70 NYLOCK 8 4C D SUPPORT ASSEMBLY HOOD REAR 1 5 D BRACKET & SUPPORT ASSY. HOOD REAR * 1 UPTO 9/19/ D BRACKET & SUPPORT ASSY. HOOD REAR * 1 FROM 9/20/ D BRACKET & SUPPORT ASSY. HOOD REAR 1 UPTO 3/27/ D BRACKET & SUPPORT ASSY. HOOD REAR 1 FROM 3/28/ D WASHER 1/4" FLAT 11 7 D BOLT 1/4"-20x0.62" HEX HEAD 4 8 D WASHER 5/16" FLAT 2 9 D NUT 5/16"-18 HEX 2 10 D COVER STEERING GEAR 1 10 D COVER STEERING GEAR * 1 10 D COVER STEERING ** 1 11 D BRACKET STEERING GEAR COVER REAR 1 11 D BRACKET STEERING GEAR COVER REAR * 1 12 D BRACKET ASSY. STG. GEAR COVER RH 1 12 D BRACKET ASSY. STG. GEAR COVER RH ** 1 12 D BRACKET STEERING GEAR COVER RH * 1 13 D BRACKET ASSY. STEERING GEAR COVER LH 1 13 D BRACKET ASSY. STEERING GEAR CVR. LH ** 1 13 D BRACKET STEERING GEAR COVER LH * 1 14 D SCREW M6x1.00x HEX HEAD 2 * ** App. For F , F , F App. ForF , F

156 Table - 47 SHEET METAL SHEET : A

157 Table - 47 SHEET METAL ITEM PART NO. DESCRIPTION QTY REMARKS NO D SCREW TAPPING #10-16x1.25" CROSS 2 RECESSED PAN HEAD 14A D NUT RADIATOR GRILL MOUNTING 6 15 D PIN 3/32"x0.75" COTTER 2 16 D ROD ASSEMBLY TOP HOOD HINGE 1 17 D GROMMET HOOD SUPPORT 5 18 D PANEL ASSEMBLY HOOD RH 1 UPTO 3/25/ D PANEL ASSEMBLY HOOD CENTRE RH 1 FROM 3/26/ D PANEL ASSEMBLY HOOD CENTRE RH * 1 19 D HANDLE ASSEMBLY HOOD RH 2 20 D SCREW M4x0.70x10 CROSS RECESSED PAN HEAD D RIVET HOOD LATCH 8 21 D LOCK ASSEMBLY HOOD 2 22 D NUT 1/4"-20 NYLOCK 2 23 D NUT 1/4"-28 HEX 2 24 D HINGE ROD HOOD TOP 1 24A D SUPPORT ROD 1 25 D BRACKET ASSY. HOOD CATCH RETAINER REAR 1 26 D SCREW 1/4"-28x0.625 PAN HEAD 4 27 D NUT 1/4"-20 NYLOCK 2 27A D PANEL ASSEMBLY HOOD LH 1 UPTO 3/25/ A-1D PANEL ASSEMBLY HOOD CENTRE LH 1 FROM 3/36/ A D PANEL ASSEMBLY HOOD CENTRE LH * 1 28 D ROD STAY HOOD TOP FRONT PANEL 1 29 D NUT M6x HEX 2 30 D WASHER M6 FLAT 4 31 D SEAL RADIATOR AIR 1 32 D SHELL ASSEMBLY RADIATOR ** 1 UPTO 8/17/ D SHELL ASSEMBLY RADIATOR ** 1 FROM 8/18/ D SHELL ASSEMBLY RADIATOR 1 App. For F * ** App. For F , F , F App. ForF

158 Table - 47 SHEET METAL SHEET : A

159 Table - 47 SHEET METAL ITEM PART NO. DESCRIPTION QTY REMARKS NO. 32 D SHELL ASSEMBLY RADIATOR 1 32 D SHELL ASSEMBLY RADIATOR ** 1 UPTO 12/17/ D SHELL ASSEMBLY RADIATOR ** 1 UPTO 2/23/ D SHELL ASSEMBLY RADIATOR ** 1 FROM 2/24/ D SUPPORT RADIATOR SHELL # 1 33 D SUPPORT RADIATOR SHELL 1 UPTO 11/24/ D SUPPORT RADIATOR SHELL UPPER 1 FROM 11/25/ D SUPPORT ASSY. RADIATOR SHELL UPPER 1 App. For F , F ,F D SEAL RADIATOR AIR 1 35 D BUMPER HOOD TOP FRONT PANEL 6 36 D LATCH ASSEMBLY HOOD 2 37 D RIVET HOOD LATCH 4 38 D PLATE HOOD LATCH 1 39 D PANEL ASSEMBLY TOP HOOD FRONT 1 40 D WASHER 3/8" LOCK EXTERNAL TOOTH 4 40A D HINGE ASSY. HOOD TOP FRONT PANEL 1 41 D SCREW M6x1.00x HEX HEAD 4 42 D PLATE HOOD TOP FRONT 1 43 D BOLT 3/8"-16x0.75" HEX HEAD 6 44 D GRILL ASSEMBLY RADIATOR 1 44 D GRILL ASSEMBLY RADIATOR 1 App. For F D BAFFLE ASSEMBLY FRONT AXLE SUPPORT 1 46 D FRAME ASSEMBLY CANOPY TOP * 1 47 D SUPPORT CANOPY CROSS * 1 48 D CANOPY ASSEMBLY (FRP) * 1 # * ** App. For F , F , F , F , F , F , App. For F , F , F App. ForF

160 Table - 47 SHEET METAL SHEET : A

161 Table - 47 SHEET METAL ITEM PART NO. DESCRIPTION QTY REMARKS NO. 49 D PAD CANOPY FRAME * 8 50 D FRAME ASSEMBLY CANOPY RH * 1 51 D FRAME ASSEMBLY CANOPY LH * 1 52 D PAD PANEL HOOD TO RADIATOR SHELL ** 1 NI FROM 9/20/ D BEADING FRONT HOOD INNER ** 1 NI 54 D CLAMP THREADED (REQ LATCH HOOD) 2 NI 55 D BRACKET ASSY. HOOD CATCH RETAINER FRONT 1 NI 56 D BUMPER HOOD TOP CENTRE PANEL 4 NI 57 D BAFFLE ASSEMBLY HOT AIR 1 58 D PAD PANEL HOOD * 1 59 D PLATE FRAME REINFORCEMENT * 4 60 D PLATE STEERING GEAR COVER 1 * ** App. For F , F , F App. ForF , F

162 Table - 48 REAR VIEW MIRROR SHEET :

163 Table - 48 REAR VIEW MIRROR ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D MIRROR AND ROD ASSEMBLY REAR VIEW 1 2 D BUSH REAR VIEW MIRROR 1 3 D GROMMET HOOD SUPPORT 4 4 D NUT M5x0.80 NYLOCK 4 5 D WASHER M5 FLAT 8 6 D PLATE REAR VIEW MIRROR 1 7 D BRACKET ASSEMBLY REAR VIEW MIRROR 1 8 D WASHER M6 FLAT 1 9 D NUT M6x1.00 HEX NYLOCK 1 10 D SCREW M5x0.80x25 CROSS RECESSED PAN HEAD 4 154

164 Table - 49 RUNNING BOARDS AND FENDER SHEET :

165 Table - 49 RUNNING BOARDS AND FENDER ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D FENDER ASSEMBLY REAR RH 1 1 D FENDER ASSEMBLY REAR RH 1 Applicable For F , F D FENDER ASSEMBLY REAR RH * 1 2 D HOLD DOWN 2 3 D PLATE HOLD DOWN 2 4 D WASHER 5/16" SPRING LOCK 4 5 D BOLT 5/16"-18x1.00" HEX HEAD 4 6 D NUT 1/4"-28 HEX 6 7 D WASHER 5/8" SPRING LOCK 4 8 D NUT 5/8"-18 HEX 4 9 D WASHER 1/4" SPRING LOCK 6 10 D BOLT 1/4"-20x0.50" HEX HEAD FLANGED 6 (GENERATOR TERMINAL) 11 D BOLT 5/8"-18x6.50" CARRIAGE 4 11 D BOLT 5/8"-18x8.50" CARRIAGE *** 4 12 D FENDER ASSEMBLY REAR LH 1 12 D FENDER ASSEMBLY REAR LH 1 Applicable For F , F D FENDER ASSEMBLY REAR LH * 1 13 D BOX ASSEMBLY TOOL 1 14 D WASHER 5/16" LOCK EXTERNAL TOOTH 3 15 D BOLT 5/16"-18x0.375" HEX HEAD 3 16 D WASHER 1/2" SPRING LOCK 4 17 D NUT 1/2"-20 HEX 4 18 D BOLT 1/4"-28x0.62" HEX HEAD 2 19 D WASHER 1/4" FLAT 2 * ** *** App. For F , F , F App. ForF , F App. For F , F , F , F , F

166 Table - 49 RUNNING BOARDS AND FENDER SHEET :

167 Table - 49 RUNNING BOARDS AND FENDER ITEM PART NO. DESCRIPTION QTY REMARKS NO. 20 D CLIP WIRE CONDUIT 1 21 D NUT 1/4"-28 HEX 2 22 D U BOLT FENDER TO REAR AXLE 2 22 D U BOLT REAR FENDER TO REAR AXLE ** 2 22A D PAD REAR FENDER RAISER 2 Applicble For F , F A D PAD REAR FENDER RAISER 2 App. For F FROM 8/12/ A D PAD REAR FENDER RAISER 2 App. For F FROM 10/10/ A D PAD REAR FENDER RAISER 2 FROM 9/20/2003 App. For F D BOLT 1/4"-28x0.62" HEX HEAD 6 23A D PAD FENDER RAISER 2 Applicble For F , F A D PAD FENDER RAISER 2 FROM 8/12/2004 App. For F A D PAD FENDER RAISER 2 FROM 1/26/2003 App. For F , F D WASHER 1/4" FLAT 6 25 D WASHER 3/8" FLAT 4 26 D WASHER 3/8" SPRING LOCK 4 27 D BOLT 3/8"-16x0.75" HEX HEAD 3 28 D WASHER 1/4" SPRING LOCK 6 29 D NUT 1/4"-28 HEX 6 29A D SCREW M12x1.75x HEX HEAD * 2 30 D BOARD ASSEMBLY RUNNING RH 1 UPTO 1/22/ D BOARD ASSEMBLY RUNNING RH 1 FROM 1/23/2004 * ** App. For F , F , F App. ForF , F , F , F , F

168 Table - 49 RUNNING BOARDS AND FENDER SHEET :

169 Table - 49 RUNNING BOARDS AND FENDER ITEM PART NO. DESCRIPTION QTY REMARKS NO. 30A D BRACKET WATER BOTTLE HOLDING * 1 31 D BOLT 3/8"-16x0.875" HEX HEAD 1 32 D STEP RUNNING BOARD LH 1 33 D WASHER 5/16" SPRING LOCK 2 34 D WASHER 5/16" FLAT 2 35 D BOLT 5/16"-18x0.88" HEX HEAD 2 36 D WASHER 5/16" FLAT 2 37 D BOLT 5/16"-18x0.88" HEX HEAD 2 38 D BOARD ASSEMBLY RUNNING LH 1 39 D BOLT M8x1.25x20 CARRIAGE D WASHER M8 SPRING LOCK 2 41 D WASHER 5/16" FLAT 2 42 D SWITCH ASSEMBLY STOP LAMP 1 App. For F , F , F D SWITCH ASSEMBLY STOP LAMP 1 UPTO 1/22/ D SWITCH ASSEMBLY STOP LAMP 1 FROM 1/23/ D BRACKET STOP LAMP SWITCH MOUNTING 1 UPTO 1/22/ D BRACKET STOP LAMP SWITCH MOUNTING 1 App. For F D WASHER 3/8" SPRING LOCK 1 45 D NUT 3/8"-16 HEX 1 46 D BOLT 7/16"-14x1.25" HEX HEAD 2 47 D WASHER 7/16" SPRING LOCK 2 48 D SUPPORT RUNNING BOARD LH 1 48 D SUPPORT RUNNING BOARD LH 1 49 D WASHER 3/8" FLAT 2 50 D WASHER 3/8" SPRING LOCK 2 51 D BOLT 3/8"-16x0.75" HEX HEAD 2 52 D WASHER 5/16" SPRING LOCK 2 53 D NUT 5/16"-24 HEX 2 * App. For F , F , F

170 Table - 49 RUNNING BOARDS AND FENDER SHEET :

171 Table - 49 RUNNING BOARDS AND FENDER ITEM PART NO. DESCRIPTION QTY REMARKS NO. 54 D NUT M8x HEX 2 UPTO 4/25/ D BRACKET ASSY. RUNNING BOARD REAR LH * 1 56 D BRACKET ASSY. RUNNING BOARD MTG. LH * 1 57 D BOARD ASSEMBLY RUNNING MAIN RH * 1 58 D BOARD ASSEMBLY RUNNING MAIN LH * 1 59 D BOARD ASSEMBLY RUNNING FRONT RH * 1 60 D BOARD ASSEMBLY RUNNING FRONT LH * 1 61 D BRACKET ASSY. RUNNING BOARD REAR RH * 1 62 D BRACKET ASSY. RUNNING BOARD MTG. RH * 1 63 D SPACER RUNNING BOARD SUPPORT 1 NI 64 D PEDAL FOOT RH 1 NI 65 D PEDAL FOOT LH 1 NI * App. For F , F , F

172 Table - 50 TOOL BOX EQUIPMENT SHEET :

173 Table - 50 TOOL BOX EQUIPMENT ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D TOOL ROLL 1 2 D SPANNER 19X21 RING WRENCH RING 24x30MM 1 NSS SPANNER D/E 3/4"x11/16" 1 NSS SPANNER D/E 5/8"x9/16" 1 NSS SPANNER D/E 1/2"x7/16" 1 NSS SPANNER D/E 3/8"x5/16" 1 NSS SCREW DRIVER 1 NSS D SPANNER RING 22x24 1 NSS D PIN LINCH 1 12 D TOOL KIT WITHOUT KEYS * 1 12 D TOOL KIT WITHOUT KEYS 1 UPTO 9/20/ D TOOL KIT WITHOUT KEYS 1 FROM 9/21/ D PIN 1.0"x4.0" CLEVIS (HYD. LIFT UPPER LINK) 1 NI 14 D PIN LINCH LOCKING ASSEMBLY 1 NI 15 D PIN DRAWBAR UPPER LINK 1 NI 16 D BOX ASSEMBLY TOOL 1 NI * App. For F , F , F , F , F , F , F , F

174 Table - 51 DRIVER SEAT ASSEMBLY SHEET :

175 Table - 51 DRIVER SEAT ASSEMBLY ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D SCREW M8x1.25x HEX HEAD 2 FROM T D WASHER M8 FLAT 2 FROM T D EMBLEM SLOW MOVING VEHICLE 1 FROM T D STRIP MOUNTING SLOW MOVING 1 FROM T VEHICLE EMBLEM 5 D NUT M8x HEX 2 FROM T D SCREW 1/4"-28x1.0" PAN HEAD 2 FROM T D SCREW 1/4"-28x0.75" PAN HEAD 2 App. For F D SEAT ASSEMBLY DRIVER 1 7 D SEAT ASSEMBLY DRIVER * 1 8 D BOLT 7/16"-14x1.25" HEX HEAD 2 9 D WASHER 7/16" FLAT 2 10 D BRACKET DRIVER SEAT MOUNTING * 1 11 D WASHER M12 FLAT 2 12 D WASHER 5/16" FLAT 2 13 D NUT 7/16"-14HEX 2 * App. For F , F , F

176 Table - 52 DECALS SHEET :

177 Table - 52 DECALS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 1 D DECAL TRACTOR MAINTENANCE SERVICE 1 2 D DECAL MODEL IDENTIFICATION CENTRE LH 1 2 D DECAL MODEL IDENTIFICATION CENTRE 1 PANEL RH (FT-60DX) 3 D DECAL MODEL IDENTIFICATION CENTRE RH 1 3 D DECAL MODEL IDENTIFICATION CENTRE 1 PANEL LH (FT-60DX) * 4 D DECAL MODEL IDENTIFICATION FRONT 1 4 D DECAL MODEL IDENTIFICATION FRONT 1 HOOD (FT-60DX) * 5 D DECAL MODEL IDENTIFICATION REAR LH 1 5 D DECAL MODEL IDENTIFICATION REAR LH (FT-60DX) * 1 6 D DECAL MODEL IDENTIFICATION REAR RH 1 6 D DECAL MODEL IDENTIFICATION REAR RH (FT-60DX) * 1 7 D DECAL TRANSMISSION SHIFT PATTERN 1 7 D DECAL TRANS. SHIFT PATTERN (14.9x28 REAR TYRE) * 1 7 D DECAL TRANSMISSION SHIFT PATTERN ** 1 8 D DECAL PTO CONTROL 1 9 D DECAL OPERATING INSTRUCTION 1 10 D DECAL BATTERY WARNING 1 11 D DECAL FILTER CLEANER 2 12 D DECAL VEHICLE WARNING 1 13 D DECAL HYD. PUMP AND LIFT QUADRANT 1 14 D DECAL TRACTOR SAFETY INSTRUCTIONS 1 15 D PLATE MODEL & CHASSIS IDENTIFICATION 1 NI, UPTO 11/16/ D PLATE MODEL & CHASSIS IDENTIFICATION 1 NI, FROM 11/17/ D DECAL CAUTION ALTERNATOR 1 NI * ** App. For F , F , F App. For F , F , F , F

178 Table - 52 DECALS SHEET :

179 Table - 52 DECALS ITEM PART NO. DESCRIPTION QTY REMARKS NO. 17 D DECAL MODEL IDENTIFICATION LIVE PTO ** 1 18 D DECAL ADI 1 NI 19 D DECAL BHARAT II 1 NI, UPTO 12/4/ D DECAL BHARAT III 1 NI, FROM 12/5/ D DECAL MULTISPEED POWER TAKE OFF * 1 20 D DECAL CAUTION MULTI SPEED POWER TAKE OFF * 1 21 D DECAL HIGHER CAPCITY LIFT 1 NI, App. For F D DECAL DRY AIR CLEANER 1 NI, App. For F D DECAL FILTER CLEANER 2 23 D DECAL SUNNY DEOL 1 NI 24 D DECAL SUNNY LIMITED EDITION * 1 * ** App. For F , F , F App. For F , F , F , F , F

180 Table - 53 SPECIAL SERVICE TOOLS SHEET : SST-EPT

181 Table - 53 SPECIAL SERVICE TOOLS ITEM NO. PART NO. TOOL NO. DESCRIPTION DESCRIPTION QTY AGGREGATE REMARKS 1 D EF 0300 Adjustable Bridge Puller Multi Purpose 2 D EF 0501 Pulling Attachement(Small) Multi Purpose 3 D EF 0600 Slide Hammer Multi Purpose 4 D EF 0601 Internal/External puller Multi Purpose 5 D EF 0800 Pulling Arm Multi Purpose 6 D EF 1100 Pull Scale Engine 7 D EF1903 GAUGE COMP. TEST WITH PIPE & ADAPTER Engine 8 D OF1901 INJECTOR DUMMY (SET 3 NOS) FT MODELS Engine 9 D OF2502 PULLER CYL. SLEEVE (WITH 1 NO Engine PLATE) FT30/35 MODELS 10 D OF0102 REPLACER ENGINE REAR OIL SEAL (AVL) Engine 11 D OF0103 REPLACER ENGINE FRONT OIL SEAL (AVL) Engine 12 D OF 1403 Engine Rear Main Seal Installer ( For Non AVL) Engine 13 D EF1906 RING COMPRESSOR Engine 14 D EF1907 EXPANDER RING INSTALLER Engine 15 D OF1601A PIPE SWAN NECK (SET 2 NOS) FT MODELS Fuel System 16 D EF-SW 13-1 Clutch Plates Locater -(Double Clutch) Clutch 17 D EF 1300 Drive Pinion Bearing Pre Load Gauge Rear Axle 18 D OF 1301 Drive Penion Brg. Pre Load Gauge-Adopter Rear Axle 172

182 Table - 53 SPECIAL SERVICE TOOLS SHEET : SST-EPT

183 Table - 53 SPECIAL SERVICE TOOLS ITEM PART NO. TOOL NO. DESCRIPTION DESCRIPTION QTY AGGREGATE REMARKS NO. 19 D OF 1402 Axle Shaft Bearing Retainer Nut Wrench Rear Axle 20 D OF 0800 Diff. Case BoltTorqueWrench Adapter Rear Axle 21 D OF 0900 Pinion Bearing Preload Wrench Rear Axle 22 D OF 1405 Axle Shaft Bearing Retainer Nut Wrench Rear Axle 23 D EF 1400 Pressure Test Gauge with Pipe & valve Hydraulics 24 D OF1400A ADAPTER HYD. PRESSURE PIPE (FT MODELS) Hydraulics 25 D OF 1000 CheckValve Seat Replacer Hydraulics 26 D OF 1100 Hyd. Lift Control Valve Setting Gauge ( 30 Thou ) Hydraulics 27 D EF 1800 Steering Wheel Puller Steering 28 D EF1801 PULLER STEERING ARM (DDA RCB) Steering 29 D FC-0600A TOOL SLIDE HAMMER Transmission 30 D FC-0197 SEAL OIL PTO COVER Transmission 31 D FC-0198 SEAL OIL INPUT SHAFT Transmission 32 D FC-0199 REMOVER OIL SEAL Transmission 33 D FC-0200 REMOVER OIL SEAL Transmission 34 D FC-0201 REMOVER TRUMPET WHEEL OIL SEAL Transmission 35 D FC-0202 SEAL OIL EPICLYIC Transmission 36 D FC-0203 REMOVER TRUMPET WHEEL OIL SEAL Transmission 174

184 Table - 53 SPECIAL SERVICE TOOLS SHEET : SST-EPT

185 Table - 53 SPECIAL SERVICE TOOLS ITEM NO. PART NO. TOOL NO. DESCRIPTION DESCRIPTION QTY AGGREGATE REMARKS 37 D FC-0205 PULLER PINION NUT Transmission 38 D FC-0206 ADJUSTER PINION Transmission 39 D FC-0209 ADJUSTER PINION NUT Transmission 40 D FC-0210 TOOL BRAKE ASSEMBLY Transmission 41 D FC-0215 CLAMP PINION Transmission 42 D FC-0226/27/28 FINGER SETTING CLUTCH Transmission 43 D FC-0229 HANDLE Transmission 176

186 SPARE PARTS INDEX Part No Tab.-Item. No. Part No Tab.-Item. No. Part No Tab.-Item. No. D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D S1 D S1 D S2 D S2 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

187 SPARE PARTS INDEX ITEM Part No PART NO. Tab.-Item. No. NO. Part DESCRIPTION No Tab.-Item. No. Part QTY No REMARKS Tab.-Item. No. D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D a D D D D D D D D A D S2 D S2 D S1 D S1 D D D D D D S1 D S3 D S4 D S5 D D D D D D S2 D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D

188 SPARE PARTS INDEX Part No Tab.-Item. No. Part No Tab.-Item. No. Part No Tab.-Item. No. D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D A D D D D D D D D D D D A D A-S D D

189 SPARE PARTS INDEX ITEM Part No PART NO. Tab.-Item. No. NO. Part DESCRIPTION No Tab.-Item. No. Part QTY No REMARKS Tab.-Item. No. D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A-S1 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D C D D D D D D D B D D D D D D D D D D D D D D D D D D A D D D D A D D D D D D D D D

190 SPARE PARTS INDEX Part No Tab.-Item. No. Part No Tab.-Item. No. Part No Tab.-Item. No. D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D A D D D D D D D D D D A D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D A D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

191 SPARE PARTS INDEX ITEM Part No PART NO. Tab.-Item. No. NO. Part DESCRIPTION No Tab.-Item. No. Part QTY No REMARKS Tab.-Item. No. D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D S D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D A D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

192 SPARE PARTS INDEX Part No Tab.-Item. No. Part No Tab.-Item. No. Part No Tab.-Item. No. D D D D D D D A D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D S1 D S2 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D b D a D D D D D D D D D D D D D D D D D D D D D D D D D D D D D S1 D D D D D D D

193 SPARE PARTS INDEX ITEM Part No PART NO. Tab.-Item. No. NO. Part DESCRIPTION No Tab.-Item. No. Part QTY No REMARKS Tab.-Item. No. D D D S2 D D D D S1 D S2 D S3 D D D D D D D D D D D D D D D D D D D D D D D A D D D a D b D D d D c D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D S3 D D D D D D D D D D D D D B D D D A D D D D D D D D D D D D B D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D A D A D D D D D D D D D D D D D D D D D D D D D D D

194 SPARE PARTS INDEX Part No Tab.-Item. No. Part No Tab.-Item. No. Part No Tab.-Item. No. D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D A D A D A D A D D D D D D D D D D D D A D D D D D D D D A D D D D D D D D A D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D A-1 D D D D D D D D D D D D

195 SPARE PARTS INDEX ITEM Part No PART NO. Tab.-Item. No. NO. Part DESCRIPTION No Tab.-Item. No. Part QTY No REMARKS Tab.-Item. No. D D D S1 D S2 D S4 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D S1 D S2 D S3 D S4 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

196 SPARE PARTS INDEX Part No Tab.-Item. No. Part No Tab.-Item. No. Part No Tab.-Item. No. D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D A D D D D D D D D D D D D D D D A D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

197 SPARE PARTS INDEX ITEM Part No PART NO. Tab.-Item. No. NO. Part DESCRIPTION No Tab.-Item. No. Part QTY No REMARKS Tab.-Item. No. D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D D D D D D D D D D D D D D D D D D D D D A D D D D D D D D D

198 TABLE NO. ITEM NO. AMENDMENTS PART NO. DESCRIPTION QTY REMARKS 189

199 AMENDMENTS TABLE ITEM ITEM PART NO. PART NO. NO. NO. DESCRIPTION QTY QTY REMARKS 190

200 NOTES 191

201 ITEM NO. PART NO. DESCRIPTION NOTES QTY REMARKS 192

202