- PDF Free Download

Size: px

Start display at page:

Download ""

Brent Hicks
5 years ago
Views:

Toll Free 1-800-814-7533 www.automotiveinteriors.

cover to upgrade or replace your present interior.

made seat cover to fit your vehicle seats.

Design Layouts that we offer (STANDARD PREMIUM CLASSIC - CLASSIC 2) and (b) Use any of the

Cloth materials. Each material has its own assortment of colors - see pages 4 and 5.

Within each design choice you have options you can select to give your vehicle a "Custom

1956 Chevy Bel Air 2 DR Hardtop Classic Design with Top Cap 1969 Oldsmobile Cutlass "S" 2 DR

1 Toll Free Custom Tailored Seat Covers These seat covers provide you with a reasonably priced seat cover to upgrade or replace your present interior. Although these are not the Original Factory Stock Sewn seat covers, they do provide a tailor made seat cover to fit your vehicle seats. There are some limitations to this style of seat cover (a) You must choose from one of the 4 Design Layouts that we offer (STANDARD PREMIUM CLASSIC - CLASSIC 2) and (b) Use any of the Standard Stock Materials which include - Dielectric Heat Sealed Vinyl or 2 Machine Quilted Cloth materials. Each material has its own assortment of colors - see pages 4 and 5. In certain interiors the design layout may be similar to your vehicle seats. Within each design choice you have options you can select to give your vehicle a "Custom Look" Chevy Bel Air 2 DR Hardtop Classic Design with Top Cap 1969 Oldsmobile Cutlass "S" 2 DR Conv Classic Design - No Options 1953 Oldsmobile 88 2DR Coupe Standard Design with Top Cap 1953 Studebaker Commander 2 DR Hardtop Premium Design with Top Cap 1959 Mercury Monterey 4DR Sedan Premium Design with Top Cap 1956 INTERNATIONAL S130 2 DR PICK UP Standard Design - No Options Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 1

2 General Information The installation process varies - you can cover over your existing seat cover or remove the originals. It will depend on the condition of the original seat that you are recovering. In some cases when the original seat covers are removed you may need to add some additional foam padding. These seat covers will not come with the original type of tie downs (listings), pockets for wires or the special plastic clips that maybe on newer vehicles. Of course, we do add extra vinyl around the perimeter edges to allow you to Hog Ring the seat cover to the springs underneath the actual seats. These seat covers are made for a permanent type of installation. Installation Kits (Instructions/ Hog Ring Pliers/ Hog Rings) are included to complete your project. How to price a seat cover Determine the DESIGN LAYOUT you wish to go with - Prices are based on the actual design layout. Then review what materials you may use for the MAIN Pleated Area and which color you will be using for the TRIM areas. Main Material - Quilted Vinyl or 2 Machine Quilted Cloth Materials [ See Trim Area Smooth vinyl or cloth sections of the seats such as the side bands, backs of the seats and any Cap/Panels that you may add from one of our design choices. Trim Areas can be done in a contrasting color at no extra charge. Are you adding any extras such as Horizontal Pleating, Headrest & Armrest covers that are actually part of the seat configuration? See the Accessories & Extra Charge Prices. All materials used for the seat covers are available for purchase in yard goods. You may have other areas of your project that will require additional materials. SEE BASIC DIAGRAM CHART ON THE NEXT PAGE Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 2

Custom Tailored - Design Layouts GOLD AREA ( Main

Note on cloth Page BROWN AREA ( Trim Material )

the Front Backrests are done in the Smooth Trim

that can be added to the Primary Design STANDARD

Panel CLASSIC DESIGN Side & Center Panels CLASSIC 2

Panel - No Extra Charge This is a smooth panel that

STANDARD DESIGN Option 1: Top Cap Panel PREMIUM

Option 1: Top Cap Panel CLASSIC 2 DESIGN Option 1:

Seat Cushion Cap Panel - No Extra Charge These are

and front section of the seat cushion for each seat.

Cushion Cap/Panel PREMIUM DESIGN Option 2: Top Cap

2: Top Cap Panel Seat Cushion Cap/Panel CLASSIC 2

Cap/Panel 2 Choices for Quilted/Pleated Main

3 Custom Tailored - Design Layouts GOLD AREA ( Main Material ) PLEATED VINYL or CLOTH MATERIAL - ** See Note on cloth Page BROWN AREA ( Trim Material ) SMOOTH VINYL OR CLOTH Material NOTE: The Rear of the Front Backrests are done in the Smooth Trim color We offer 4 Primary Designs for the seat covers. Below each design you will see additional options that can be added to the Primary Design STANDARD DESIGN ALL Pleated Seating PREMIUM DESIGN Center Panel CLASSIC DESIGN Side & Center Panels CLASSIC 2 DESIGN Side Panels Only Option 1 - Smooth Top Cap Panel - No Extra Charge This is a smooth panel that is located at the top of the backrest for each seat. STANDARD DESIGN Option 1: Top Cap Panel PREMIUM DESIGN Option 1: Top Cap Panel CLASSIC DESIGN Option 1: Top Cap Panel CLASSIC 2 DESIGN Option 1: Top Cap Panel Option 2 - Smooth Top Cap Panel and Seat Cushion Cap Panel - No Extra Charge These are smooth panels located at the top of the backrest and front section of the seat cushion for each seat. STANDARD DESIGN Options 2: Top Cap/Panel Seat Cushion Cap/Panel PREMIUM DESIGN Option 2: Top Cap Panel Seat Cushion Cap/Panel CLASSIC DESIGN Option 2: Top Cap Panel Seat Cushion Cap/Panel CLASSIC 2 DESIGN Option 2: Top Cap Panel Seat Cushion Cap/Panel 2 Choices for Quilted/Pleated Main Material VERTICAL PLEATS - STANDARD HORIZONTAL PLEATS - Additional Charge Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 3

4 SEAT COVER PRICES APPLIES TO ALL MATERIALS WATCH FOR SALE PRICES - ON LINE DESIGN LAYOUT Front or Rear Complete Front & Rear Design 1 STANDARD All Pleated/Quilted Seating $ $ Design 2 PREMUM - All Pleated/Quilted Seating with Smooth Center Panel $ $ Design 3 CLASSIC - Pleated/Quilted Seating with Side End Panels & Center Panel $ $ Design 4 CLASSIC 2 - Pleated/Quilted Seating with Side End Panels Only $ $ Shipping Determined by State and Zip Code Destination Zip Code Option 1 Option 2 OPTIONS AVAILABLE FOR ALL DESIGNS - NO EXTRA CHARGES Smooth Top Cap Panel - This is made in the smooth Trim material Smooth Top and Cushion Cap/Panel - These are made in the Smooth Trim Material TWO TONE No Extra Charge ACCESSORY ITEMS ADDITIONAL CHARGES APPLY ARMREST COVERS Solid Design ( Only if Part of the Actual Seat ) ARMREST COVERS 2pc Console Type ( Only if Part of the Actual Seat ) FRONT CENTER LOWER CUSHION For the Type of Seats HEADREST COVERS These are for Front or Rear Headrests that are Adjustable HORIZONTAL PLEATS - SEAT REBUILD KITS 1 Kit will do a Full Bench Seat or 2 Bucket Seats [ 1" Foam ] SEAT REBUILD KITS 1 Kit will do a Full Bench Seat or 2 Bucket Seats [ 2" Foam ] WATERPROOF DOOR PANEL BOARDS ( 32 x 48 ) $35.00 Each $50.00 Each $50.00 Each $50.00 Pair $20/Front // $35 Full Set $ SH $ Each + SH $15.00 Each + SH Pictures would be welcomed if sending - Please Include Vehicle Information Samples of our materials are available for 75 cents per sample. Samples are non-returnable. If you are interested in samples - call or order online: (Under Samples) Factory Original Sewn Style Replacement Upholstery This type of seat cover will restore your vehicle back to its Sewn Stock Appearance. Are you looking for Original FACTORY Stock/Sewn replacement upholstery? If so, we may be able to assist you if: The original seat covers are in useable condition for new patterns. You are willing to remove the old seat cover and send to us to reproduce. Not all patterns are accepted for reproduction. Contact our Customs Department and speak with Diane, Extension 3 or Diane@automotiveinteriors.com Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 4

5 PLEATED VINYL S Pleated Vinyl s come in three different types of heat sealed pleats. Each vinyl type has its own standard colors for that particular vinyl. All the colors come in smooth flat vinyl so that you can TWO-TONE your seats with various colors. Single Pleated Vinyl A heavy-duty Madrid grain vinyl with 1 ½ Dielectric heat-sealed padded pleat. The Pleats are evenly divided. Double Pleated Vinyl A heavy-duty Oxen grain vinyl with 2 Dielectric heat-sealed padded pleats divided by a ½ padded pleat. Bold Single Pleated Vinyl Bright & Sassy Colors This vinyl comes with Dielectric 2 heat-sealed evenly divided padded pleats SPV 707 Black DPV 760 Black BV 472 Tomato Red SPV 775 Ant White DPV 797 Charcoal BV 474 Snow White SPV 722 Light Blue DPV 768 Maroon BV 470 Sunflower SPV 765 Midnite Blue DPV 732 Med Blue SPV 735 Aqua Blue SPV 736 Buckskin SPV 748 Beige SPV 777 Saddle SPV 700 Red DPV 737 Buckskin DPV 798 Red DPV 764 Dk Green DPV 767 Saddle DPV 763 Navy SPECIAL ORDER DIELECTRIC HEAT PLEATED VINYLS 1 ½" Pleat Other Colors are available - Special Order Such as: Purple, Orange, Yellow, Etc Inquire to Diane Ext 3 SPV 743 Maroon DPV 772 Desert SPV 794 Camel DPV 779 Mist Gray SPV 785 Aqua/Green DPV LT Graphite MetMet))) SPV 755 Gold (Met) SPV 705 Light Green DPV Med Graphite DPV 795 Camel This vinyl style is limited and will be discontinued in the near future [9/1/2018] Materials by the Yard All PLEATED VINYLS - 54 Wide ALL SMOOTH VINYLS 54 Wide $30.00 / Yard $17.00 / Yard Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 5

6 or TWEED 2 STITCH PLEATED CLOTH Soft and durable Tweed, Velour or Vintage Cloth with Machine Stitched 2 Top Pleat. Your seat covers can be done in all Cloth or Cloth / Vinyl combination. The 2 Top Stitch Pleats runs Vertical unless you choose Horizontal (extra charge). 2 Machine PLEATED CLOTH MATERIALS TWEED MATERIAL 52 WIDE: $38.00 / YD PLEATED TWEED MATERIAL 54 WIDE: $19.00 / YD SMOOTH MATERIAL 52 WIDE: $38.00 / YD PLEATED MATERIAL 54 WIDE: $21.00 / YD SMOOTH TWEED - TWP 592 DK BLUE TWEED - TWP 585 OAK TWEED - TWP 581 TUXEDO GRAY SILVER NAVY DARK GREEN TWEED - TWP 586 SABLE TWEED - TWP 591 STONE TWEED - TWP 593 DK GREEN BURGUNDY HARVEST RED TWEED - TWP 580 CHARCOAL TWEED - TWP 589 BLACK (EBONY) TWEED - TWP 582 CURRENT MAROON SANDSTONE CHARCOAL ROYAL BLUE BLACK WALNUT TWEED - TWP590 PEWTER VINTAGE CLOTH 52 WIDE: $38.00/YD PLEATED VINTAGE MATERIAL 54 WIDE: $22.00/YD SMOOTH VINTAGE BLACK VINTAGE GUNMETAL VINTAGE CHERRY VINTAGE MOSS VINTAGE HEATHER VINTAGE DARK BLUE ** NOTE: Stitched Cloth Materials can not be done in Standard Design if solid seat back or seat cushions are larger then 51" wide - due to width of Stitch materials. Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 6

7 Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 7

SEAT REBUILD KITS Seat Rebuild Instructions Tools needed: razor blade, 3M trim adhesive, Flathead screwdriver, Wire Cutters, Marker. Illustration 1 Step (1) Remove your seat(s) from the vehicle.

Step (3) Locate the bolts and/or hinges on the outside of the seat backrest and remove. Some seats use a clip style lock that can be removed with Flathead screwdriver.

Depending on the year of the car, the covers will be stapled on or installed with hog rings. Remove staples with flathead screwdriver.

Check over springs and frames for broken welds or springs. Replace and weld if needed. (Note: tempered springs cannot be welded) Step (6) Sandblast and paint frame at this time if wanted.

8 SEAT REBUILD KITS Seat Rebuild Instructions Tools needed: razor blade, 3M trim adhesive, Flathead screwdriver, Wire Cutters, Marker. Illustration 1 Step (1) Remove your seat(s) from the vehicle. 1" or 2" High Density Foam Kits Step (2) Remove all side trim, skirts and risers. Remove and note all screws for reassembly. Step (3) Locate the bolts and/or hinges on the outside of the seat backrest and remove. Some seats use a clip style lock that can be removed with Flathead screwdriver. Once outer clip or bolt(s) is removed, the backrest can be separated from the cushion Illustration 2 Step (4) Once seats are removed place on bench, now the old covers can be removed. Depending on the year of the car, the covers will be stapled on or installed with hog rings. Remove staples with flathead screwdriver. To remove hog rings, use the wire cutter, pinch with a twisting motion. Step (5) (Illustration 1) Strip frame of all padding and burlap so all springs are exposed. Check over springs and frames for broken welds or springs. Replace and weld if needed. (Note: tempered springs cannot be welded) Step (6) Sandblast and paint frame at this time if wanted. For kits with Cotton Padding you will need to put the 7/8 Jute Padding on after the Jute Padding & before the Cotton Padding. Illustration 3 Step (7) (Illustration 2) Cut burlap 4 larger than the frame and use hog rings to attach about every 6-8" around the edge. Using the burlap acts as a foundation, preventing the new foam/cotton padding from pushing through. Step (8) (Illustration 3) Cut the high density Foam Sheets 4-6 larger than the frame. Spray glue the seat/burlap area and foam and press it on so it overhangs the edges. This prevents the foam from moving during and after installation. Try to shape a nice rolled edge and corners. Step (9) (Illustration 4) Roll out the Dacron Padding to overlap complete seat. Use trim adhesive on all the edges around seat and secure from the center out - front and rear, rolling and smoothing out. This will be 1" or 2" FOAM PADDING Illustration 4 Step (10) In order to insure that the seat cover is installed evenly on the frame, mark the center point of the seat frame once finished with marker. When installing cover match with cover center point CONGRATULATIONS You are now ready to install your covers! PRICE: $82.00 ( 1" Kit ) - $ ( 2" Kit ) + SH 1 Dacron Padding is now being used in lieu of the ¼ foam. Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 8

9 DOOR PANEL UPHOLSTERY TRIM KITS These are Upholstery Panels only. Customer needs to cut to size to fit panel boards LARGE PANEL UPHOLSTERY SMALL/MEDIUM PANEL UPHOLSTERY Finished Size Finished Size 34" HIGH x 48" WIDE 28" HIGH x 42" WIDE We offer 2 Styles of Door Panel Upholstery Kits - BASIC Panel or SUPREME Panel Below we have examples of both styles. Prices are based on Stock Materials All Vinyl Panels All Cloth Panels Cloth & Vinyl Panels BASIC PANEL: Vertical or Horizontal Pleats Top Area: Smooth Material Bottom Area: Pleated Material ( These can be reversed with Smooth on Bottom - Pleat on Top ) SUPREME PANEL: Vertical or Horizontal Pleats Center Top Area: Smooth Material Middle Area: Pleated Material Bottom Area: Smooth Material Basic Panel Vertical Pleats Basic Panel Horizontal Pleats Supreme Panel Vertical Pleats Supreme Panel Horizontal Pleats Smooth Vinyl or Cloth Must Provide Heights for each Section Smooth Vinyl or Cloth Must Provide Heights for each Section Smooth Vinyl or Cloth Must Provide Heights for each Section Smooth Vinyl or Cloth Must Provide Heights for each Section Smooth Vinyl or Cloth Must Provide Heights for each Section Smooth Vinyl or Cloth Must Provide Heights for each Section On the Smooth Areas ensure that you allow enough for wrap around when doing your calculations. Example: 6" for the amount that will be on the face of the door panel then you will need to add 2" to allow for wrap around. ( Size becomes 8" ) Red Area: Pleated Material Gray Area: Smooth Material BASIC PANELS - Priced as Each SUPREME PANELS - Priced as Each LARGE SMALL/MEDIUM LARGE SMALL/MEDIUM ALL VINYL = $85.00 ALL VINYL = $65.00 ALL VINYL = $95.00 ALL VINYL = $75.00 CLOTH & VINYL = $ CLOTH & VINYL = $85.00 CLOTH & VINYL = $ CLOTH & VINYL = $95.00 ALL CLOTH = $ ALL CLOTH = $95.00 ALL CLOTH = $ ALL CLOTH = $ Shipping is based on State & Zip Code Destination WATERPROOF CARDBOARD DOOR PANEL BOARDS These have to be Cut to Size for your vehicle using the old board as a Template Size: 32" High x 48" Wide -- (Oversized for UPS Ground Shipment) $15.00 / each + Shipping Charges If you are looking for an Original Door Panel Upholstery layout design, please a picture of your original door panel design for review to Diane@automotiveinteriors.com Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 9

PRE-SEWN READYMADE CUSTOM HEADLINERS Custom Made for Bow Supported Originals Most cars built prior to the Mid-1970's have sewn "bow-supported" type headliners.

10 PRE-SEWN READYMADE CUSTOM HEADLINERS Custom Made for Bow Supported Originals Most cars built prior to the Mid-1970's have sewn "bow-supported" type headliners. Headliner bows in older cars are the metal rods, which support the headliner. It is helpful, but not usually necessary to provide us with the number of bows when ordering. RETAIL HEADLINER COSTS All Headliners are tailored to fit the individual models. These headliners are made of the highest quality headlining weight vinyl or cloth available. Cloth Headliners: (Any of the Nap Cotton or Synthetic Cloths) 1955 & Newer Models - Passenger Cars $ & Newer Models - Station Wagons $ & Older Models - Passenger Cars $ & Older Models - Station Wagons $ Regular Vinyl Headliners: (Crater Tier Premier Basketweave - Line Dot - Bedford) 1955 & Newer Models - Passenger Cars $ & Newer Models - Station Wagons $ & Older Models - Passenger Cars $ & Older Models - Station Wagons $ Special Vinyl Headliner: (Star Vinyl & Leather Grain Vinyls) 1955 & Newer Models - Passenger Cars $ & Newer Models - Station Wagons $ & Older Models - Passenger Cars $ & Older Models - Station Wagons $ Ship Cost: BASED ON STATE/ZIP CODE Cloth Windlace - See Page 12 Wire-On Windlace to Match All Color ( SWL ) Woven Cloth Windlace ( WCWL ) Solid Cloth Windlace ( SCWL ) Woven Cloth Wire-On ( WCWO ) Solid Cloth Wire-On ( SCWO ) Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 10

11 READYMADE CUSTOM HEADLINERS - Cloth Materials Synthetic Cloth Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 11

12 READYMADE CUSTOM HEADLINERS - Regular Vinyls Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 12

READYMADE CUSTOM HEADLINERS - Special Vinyls

$9.00/Yard Wire-On Available in all Colors (WCWO)

13 READYMADE CUSTOM HEADLINERS - Special Vinyls Add-On Accessories - Cloth Windlace Stitch Windlace.5" Sponge Rod Bead Woven Cloth ( WCWL ) Colors - $9.00/Yard Wire-On Available in all Colors (WCWO) Stitch Windlace.5" Sponge Rod Bead with Kraft Paper Solid Cloth ( SCWL ) Colors - $8.00/Yard Wire-On Available in all Colors (SCWO) Date: September 1, 2018 AUTOMOTIVE INTERIORS Page 13

Century Custom Interior

Century Custom Interior Smooth Cut Velour A complete custom interior kit for your car using Bristol Fabric matching vinyl fabric. Easy to install and reasonably priced for a great looking interior. Includes: