load frames Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 2
|
|
- Beverly Williamson
- 5 years ago
- Views:
Transcription
1 Damper Testing Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 1
2 load frames Inova has a wide range of standard load frames from 10 kn up to 2 MN. This Standard load frames will be modified to meet the special requirements for Damper Testing. higher seismic mass special vibration isolation higher specimen length automatic clamping and adjustment of crosshead position step less tilting frame protective case damper fixations operation panels display of crosshead position Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 2
3 applications By the possibility of customising our standard systems and Software Inova can cover the 3 Main fields of damper testing applications. R&D: Quality assurance: Production: high flexible software and testing system high speed operation, side load, temperature control of active Dampers additional analogue I/Os for special test single and multi specimen endurance testing easy to operate, programmable, comparison and evaluation of test series full automatic operation automatic evaluation high safety requirements Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 3
4 actuators Inova has a wide range of standard high performance testing actuators from 4kN up to 2 MN with stroke from 10 mm to 400 mm Hydrostatic bearings No friction High sideload capacity High speed operation Enhanced Hydraulic damping Long life Integrated LVDT Hydraulic accumulator assembly Flexible mounting of servo valves Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 4
5 sensors Inova uses high precision, side load and overload resistant load cells. low profile high natural frequencies long term stability insensitive to eccentric load application and lateral forces fatigue proof actuator integrated LVDT for exact measurement of the piston position velocity sensor for direct measurement of the piston velocity Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 5
6 hydraulic supply Inova has a wide range of standard hydraulic power packs with a nominal flow of 6.3 up to 345 l/min 280 bar or 210 bar nominal pressure. compact design can be combined to huge plants automatic operation use of Bosch automatic flow adjusting pump filters for pressure and return long life sound absorbing cells as an option air cooling as an option Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 6
7 safety equipment Inova testing systems meets the CE regulation for user safety. set up mode with low pressure low velocity by using our PBS safety start stop manifolds protective case with safety switches and locks brings the system in set up mode if protective case door is opened emergency stop chain and all safety functions are realised in Hardware with fail safe functions. Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 7
8 digital controller State of the art digital control System. 19 rack with integrated personal computer multichannel capability up to 8 control channels multistation capability up to 4 independent test stations full digital control loop additional analogue I/O s usable by the customer high capacity 24 Volt power supply for many solenoids integrated high power UPS all safety functions realised in hardware variable packaging, table top versions available Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 8
9 software Windows 2000 software extensible by modules easy operation different user levels customisable for special test operation online Hysteresis display integrated test sequencer Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 9
10 software block setup Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 10
11 software test sequence setup Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 11
12 software data acquisition Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 12
13 software test run Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 13
14 software evaluation gas force Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 14
15 software friction diagram Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 15
16 software evaluation F/S-diagram Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 16
17 software evaluation F/V-diagram Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 17
18 software protocol Protocols can be customised for the customers requirements. Single page protocol print out Multi page protocol print out Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 18
19 abstract reference list Ateso-Jablonez Kateca - Korea SAS - Shanghai SBB - Olten University op applied since Cologne White Power - Malten ZF-Sachs - Schweinfurt ZF-Sachs - Eitorf Juni 2002 Damper Testing INOVA-GMBH JS Folie Nr. 19
SHOCK ABSORBER/DAMPER TESTING MACHINE
SHOCK ABSORBER/DAMPER TESTING MACHINE Dampening force of a shock absorber is directly proportional to velocity and this parameter needs to be precisely controlled. A small variation of 1mm in a stroke
More informationAn Introduction to Fatigue Testing Equipment, Test Setup & Data Collection
An Introduction to Fatigue Testing Equipment, Test Setup & Data Collection Lisa Goodwin Servohydraulic Sales Specialist & Market Manager - Instron The difference is measurable 1 Themes.. Certainty of Measurement
More informationSteering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2
Steering Test Rigs The World of Steering Test Machines Steering column assemblies, are by their nature extremely safety critical, thus the ability to test them accurately and repeatedly is extremely important.
More information3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS
17 3. DESCRIPTION OF SHAKING TABLE SYSTEM COMPONENTS 3.1. INTRODUCTION The earthquake simulator is a system that consists of several components which must be designed to effectively work together. Each
More informationa measurable difference...
This testing machine with integrated steel plate welded frame structure, using single boom and double-function piston liner to load testing force and fixing specimen with cylindrical pin, load cell measuring
More informationMTS Criterion Series 40 Specifications - Comparative
MTS Criterion Series 40 Specifications - Comparative Model 41 Model 42 Model 43 Model 44 C41.103 C42.503 C43.104 C43.304 C43.504 C44.104 C44.304 Maximum Rated kn 1 5 10 30 50 10 30 Force Capacity lbf 220
More informationHS CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM
HS28.610 CYCLIC CUM STATIC TRIAXIAL TEST SYSTEM Meets the essential requirements of ASTM-5311/3999 Introduction The system is a highly advanced combination of hydraulic and pneumatic technology where σ1
More informationServo-Hydraulic Vibration Test Equipment
Servo-Hydraulic Vibration Test Equipment We build vibration test equipment that performs The tests YOU need to do To evaluate the package YOU have designed To protect the product YOU must get to market
More informationDynamic tests of SRIM fluid viscous dampers
Dynamic tests of SRIM fluid viscous dampers D. FENG & Y. SASAKI Fujita Corp., Tokyo, Japan. N. YAMAZAKI & M. ISHIYAMA Nippon Chuzo Co., Ltd., Kawasaki, Japan W. ZHU Shanghai Research Institute of Materials,
More informationImprovement of hydraulic control quality for deep drawing presses through retrofit
Improvement of hydraulic control quality for deep drawing presses through retrofit Speaker: M. Helmke TRsystems GmbH 09.03.2016 10 th International Fluid Power Conference Outline & Introduction Outline
More informationServohydraulic Testing Machines for Dynamic Testing UFIB Series
Servohydraulic Testing Machines for Dynamic Testing UFIB Series Capacity: 10-250 kn or more S.a.e. ibertest Made in Europe (Spain) Fabricantes desde 1970 Universal Servo hydraulic Dynamic Testing Machines,.
More information2 Poster Motorcycle Ride Simulator
2 Poster Motorcycle Ride Simulator The World of Ride Simulators The 2 Poster Motorcycle Road Simulator System is designed to reproduce responses experienced under normal driving conditions, to test motorcycle
More informationZwick. Materials testing. Product Information LTM 5/10 electro-dynamic testing machine
CTA: 113389 113384 testing machine Range of application The LTM is an electro-dynamic testing machine with a drive based on linear motor technology. 's new, patented drive concept enables the LTM to be
More informationVibration Test Systems
Vibration Test Systems Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages,
More informationHydraulics for high-quality deep-drawn parts
White Paper Key Messages Hydraulics for high-quality deep-drawn parts Susanne Kircher Moog Marketing Communications Specialist Die cushion requirements are becoming more demanding and complex Precise analysis,
More informationWB 23 & WB 27. High-Speed Eddy-Current Dynamometers WB 23 & WB 27. Features. Description. Operating principles
WB 23 & WB 27 High-Speed Eddy-Current Dynamometers Magtrol offers 3 types of dynamometer brakes to absorb load: Hysteresis, Eddy-Current and Magnetic Powder. Each type of Dynamometer has advantages and
More informationSPRING TESTING MACHINES OVERVIEW. Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning!
SPRING TESTING MACHINES OVERVIEW Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning! Starting with retrofitting and improving testing machines of our competitors
More informationHydraulic Ram Control Unit HSE NG 6
Hydraulic Ram Control Unit HSE NG 6 Design and Function forms the basis for the stroke control. Common features of VTHL ram control units: Tdc (top dead center) control is always with mechanical closed
More informationCHAPTER 4: EXPERIMENTAL WORK 4-1
CHAPTER 4: EXPERIMENTAL WORK 4-1 EXPERIMENTAL WORK 4.1 Preamble 4-2 4.2 Test setup 4-2 4.2.1 Experimental setup 4-2 4.2.2 Instrumentation, control and data acquisition 4-4 4.3 Hydro-pneumatic spring characterisation
More informationHydraulic Drives: How to Combine Dynamics and Efficiency. Bert Brahmer,
Hydraulic Drives: How to Combine Dynamics and Efficiency Bert Brahmer, 2011-04-21 Contents 1. Introduction 2. Benefits of Hydraulics in Industrial Drives 3. Challenges for Hydraulics 4. HPPC: Highly Dynamic
More informationChapter 2 Dynamic Analysis of a Heavy Vehicle Using Lumped Parameter Model
Chapter 2 Dynamic Analysis of a Heavy Vehicle Using Lumped Parameter Model The interaction between a vehicle and the road is a very complicated dynamic process, which involves many fields such as vehicle
More informationHYDRAULIC & ENGINEERING INSTRUMENTS. Servo Hydraulic Universal Fatigue Testing System
HYDRAULIC & ENGINEERING INSTRUMENTS Servo Hydraulic Universal Fatigue Testing System Servo Hydraulic Universal Fatigue Testing System (Capacity-Ranges from kn-0kn) HI Series of Servo Hydraulic Universal
More information***Before starting : view the Virtual tour located at c:/programs/msoffice/powerpointviewer And carry out the tutorials in the manuals supplied***
Fatigue Machine Turn on Chiller isolator to machine (Located behind Torque/ Tension Machine) Turn on main isolator to machine Reset Isolator switch and wait for all LEDs to go from red to off LED s Starter
More informationZhafir Venus II Series. Zhafir Venus. Series
Zhafir Venus II Series Zhafir Venus Series An outstanding success story Zhafir Venus II SerieS During the last years of the introduction phase of the Venus Series, it has without question earned the respect
More informationMTS DuraGlide 244 Hydraulic Actuators. Superior fidelity in force generation and motion control. be certain.
l MTS DuraGlide 244 Hydraulic Actuators Superior fidelity in force generation and motion control be certain. THE EVOLVING NEEDS OF MECHANICAL TESTING: TO TEST FASTER, WITH HIGHER LOADS, GREATER FIDELITY
More informationLubrication System CLU4
1-0304-EN Lubrication System CLU4 for lubrication of large 2-stroke crosshead diesel engines - resulting in your operating costs being cut due to lower oil consump tion The advantages you get from a system
More informationThe Art of Suspension. DDA Valve
The Art of Suspension DDA Valve Dynamic Damping Adjustment DDA The Tractive dampers are equipped with the Tractive DDA Valve (Dynamic Damping Adjustment ). Damping values are dictated from the suspension
More informationPNEUMATIC LINEAR ACTUATOR
PNEUMATIC LINEAR ACTUATOR SINGLE ACTING series PA SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it PA Rev. 0/15 Pneumatic
More informationMotor Grader. BG 240 T-5 (6x4) / BG 240 TA-5 (6x6)
Motor Grader BG 240 T-5 (6x4) / BG 240 TA-5 (6x6) BG 240 T-5 (6 x 4) BG 240 TA-5 (6 x 6) Drivers cab tiltable for easy service Hydrostatic front wheel drive as option available The BG 240 is one of the
More informationSERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D
SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D STANDARD BS 8110: PART 1: 1997 3.12.8.16.2, BS4482. BS4483, BS4449, ASTM A 1034: 10.5, 10.7 TEST TYPE Slip & Tensile Strength Permanent Elongation & Tensile
More informationBeyond Standard. Dynamic Wheel Endurance Tester. Caster Concepts, Inc. Introduction: General Capabilities: Written By: Dr.
Dynamic Wheel Endurance Tester Caster Concepts, Inc. Written By: Dr. Elmer Lee Introduction: This paper details the functionality and specifications of the Dynamic Wheel Endurance Tester (DWET) developed
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationATA Series (Patented)
ATA Series (Patented) Two Position Actuators Only 24 VDC supply No compressed air needed Very fast response Controllable holding force 49 Introduction to ATA actuator The ATA is a two position, direct
More informationInternational Conference on Information Sciences, Machinery, Materials and Energy (ICISMME 2015)
International Conference on Information Sciences, Machinery, Materials and Energy (ICISMME 2015) An Electric Hydraulic Driving System of Lifting Platform for Composite Roller Casting Yongling Fu, Pengfei
More informationValve Technology and Special Solutions for Transmissions on Mobile Machines
Valve Technology and Special Solutions for Transmissions on Mobile Machines Your partner for expertise in solutions specific to mobile transmissions Innovative and tailored valve solutions for modern mobile
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More informationE / HYDAC KineSys Electric cylinders (HEZ)
E 10.146.1.1/02.15 HYDAC KineSys Electric cylinders (HEZ) NOTE The information in this brochure relates to the operating conditions and applications described. For applications or operating conditions
More informationServovalve Test Equipment ValveExpert 8.1
Servovalve Test Equipment DIETZ automation GmbH 3 Introduction Figure 1: Manual mode of the Test Equipment. is an automatic test equipment for checking, maintenance, and adjustment of servoand proportional
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationSCHMIDT ManualPress 300 Series
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationACOCAR active suspension
ACOCAR active suspension Bert Vandersmissen Vehicle Dynamics Expo Stuttgart, 07/05/2008 Contents Introduction Active suspension hardware Quarter car test rig Skyhook quarter car control Experimental skyhook
More informationVERTEX UNIVERSAL TESTING MACHINE
OVERVIEW : Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of
More informationHydraulic Proportional and Closed Loop System Design
Hydraulic Proportional and Closed Loop System Design Neal Hanson Product Manager Industrial Valves and Electrohydraulics 1 Electrohydraulics Contents 1. Electrohydraulic Principles 2. Proportional Valve
More informationPrecision-I Laboratory System Universal Digital Monitor
Precision-i Digital Monitor DM-A1 is a revolutionary monitoring device that cater to critical environment applications in Fume Hood control, Laboratory controls, Isolation Room controls and Vivariums controls.it
More informationLubrication System CLU4
1-0304-EN Lubrication System CLU4 for lubrication of large 2-stroke crosshead diesel engines - resulting in your operating costs being cut due to lower oil consump tion The advantages you get from a system
More informationPHLOX II. Ignition Control Systems. On-board diagnostics. Complete ignition system. Up to 16 cylinders. Precise ignition timing
PHLOX II Ignition Control Systems Ignition Control Coil Rails Ignition Leads Pickups Coils Complete ignition system Precise ignition timing Increased spark plug durability Easy integration via CAN On-board
More informationInnovative Testing Equipment. Torque sensors Vehicle Applications Actuators
Innovative Testing Equipment Torque sensors Vehicle Applications Actuators Custom-made measuring solutions As a leading drivetrain testing company, ATESTEO specialises in drivetrain and transmission testing
More informationProportional and Hydraulic Solenoids
Proportional and Hydraulic Solenoids Proportional Solenoid Most solenoids are simple 2 position digital devices, the proportional solenoid however is an analogue device capable of incremental positioning.
More informationElectroPuls E1000 All-Electric Dynamic Test Instrument
ElectroPuls E1000 All-Electric Dynamic Test Instrument The ElectroPuls TM E1000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials
More informationMECHANICAL Forging PRESSES WITH KNUCKLE-JOINT
MECHANICAL Forging PRESSES WITH KNUCKLE-JOINT MML / MSL. Mechanical Forging Presses with knuckle-joint. From process development and cost-effective line concepts to full production lines. MECHANICAL Forging
More informationCCS Zone/Bypass Damper Assembly
Code No. LIT-1900539 Issued July 15, 2011 UZR-xx-x, UBR-xx-x, UZD-0xxX0xx-x, UBD-0xxX0xx-x CCS Zone/Bypass Damper Assembly Description The Commercial Comfort System (CCS) Zone/Bypass Damper are zone control
More informationServo-pneumatic drive solution for welding guns. Top quality welding!
Servo-pneumatic drive solution for welding guns Sturdy and precise! Top quality welding! Highlights Extremely short cycle times High quality and outstanding reproducibility of the spot welds Excellent
More informationInnovation in. Mechanical Motion & Vibration Controls
Innovation in Mechanical Motion & Vibration Controls ACE Controls Inc. located in Farmington Hills, Michigan, is a leading innovator in deceleration, vibration and motion control technology. For over a
More informationtest with confidence HV Series TM Test Systems Hydraulic Vibration
test with confidence HV Series TM Test Systems Hydraulic Vibration Experience. Technology. Value. The Difference. HV Series TM. The Difference. Our philosophy is simple. Provide a system designed for optimum
More informationSteering unit LAGZ. Data sheet. Series 2 x
Steering unit LAGZ Data sheet Nominal sizes 125 620 Series 2 x Maximum flow 50 l / min HE 11868 / 09.2017 2 LAGZ HE 11868 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details Function,
More informationVibration Test Systems. ibratio
ibratio Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages, full pallet
More informationServotronic Digital 615 Series
Servotronic Digital 615 Series Proportional Technology www.asco.com PRESSURE CONTROL: 615 SERIES SERVOTRONIC Digital Servotronic Digital Greater versatility in automated production processes: Due to electronics,
More informationCONTINENTAL HYDRAULICS VED03MX
CONTINENTAL HYDRAULICS VED03MX HIGH PERFORMANCE, SERVO-PROPORTIONAL DIRECTIONAL CONTROL VALVE 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VED03MX HIGH
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester Elastomer.
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profi le Damper Axial Damping 76 The profile damper type TA from the innovative ACE TUBUS series is a maintenance-free, self-contained damping element made from a special Co-Polyester
More informationEMC-HD. C 01_2 Subheadline_15pt/7.2mm
C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder
More informationInput, Control and Processing elements
PNEUMATIC & HYDRAULIC SYSTEMS CHAPTER FIVE Input, Control and Processing elements Dr. Ibrahim Naimi Valves The function of valves is to control the fluid path or the pressure or the flow rate. Depending
More informationME Fundamentals and Critical Principles
ME Fundamentals and Critical Principles 1 st Classification Society Event 2017 Friday 8 December 2017 Vassilis Kois Technical Instructor MAN PrimeServ Academy Piraeus MAN Diesel & Turbo V. Kois ME Fundamentals
More informationThe two RENK LABECO test stands are intended to provide endurance and acceptance testing for both R&D and post-assembly quality assurance.
October, 200 RENK LABECO Test Systems Corporation Supports Largest Wind Turbine Test Facility with October 28th Groundbreaking at Clemson University Restoration Institute RENK LABECO Test Systems Corporation
More informationHIFI standard range. Table of contents. HiFi linear actuators. HiFi AERO actuators. HiFi R actuators. Mechanical accessories available on request
Edition: 03.10 HIFI standard range Table of contents HiFi linear actuators A HiFi AERO actuators B HiFi R actuators C Mechanical accessories available on request D Hydraulic accessories E Sensors and servo-valves
More informationDICTATOR Damping Solutions
DICTATOR Damping Solutions Types of Dampers and Functioning DICTATOR damping solutions offer four different lines of dampers: 1) EDH and ZDH final dampers Final dampers are used to slow down a movement
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping 84 The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester
More informationPVG Open Loop Pumps. Bulletin G
PVG Open Loop Pumps Bulletin 4709-G Table of Contents Performance Assurance page 3 Features and Benefits 4-5 Specifications 6 Shaft Torque Ratings 7 Pressure Pick-ups 7 Table of Contents Controls 8-9 Performance
More informationSPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
More informationSM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi)
Vickers Servo Valves SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi) Released 12/93 651 Introduction Vickers SM4-10/12/15 servovalves can provide system closed loop
More informationHYDAC KineSys Motion Control Systems
HYDAC KineSys Motion Control Systems Thermal power plants Materials handling Iron and steel industry Renewable energies Presses Plastic injection machines Your Partner for Expertise in Motion Control Solutions.
More informationTechnology that inspires. Freely programmable heavy duty rotary indexing tables CR. Side loading rotary units TH
Technology that inspires Freely programmable heavy duty rotary indexing tables CR Side loading rotary units TH Technology that inspires Freely programmable rotary unit TH 400 for horizontal side mounted
More informationCement Compression & Flexural Testing Machines
The Compression & Flexural testing product line from Torontech offers a wide variety that will fit almost any budget. Different options between models include digital or analog display, single or dual
More informationGoTo Europe Focused Delivery Program. Product overview industrial and mobile hydraulics
GoTo Europe Focused Delivery Program Product overview industrial and mobile hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times
More informationSM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi)
Vickers Servo Valves SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi) Released 1/94 653 Introduction Vickers SM4-30 servovalves can provide system closed loop control with
More informationSafety Sensor CSS 180 Product Information
Safety Sensor CSS 180 Product Information Safety Sensor CSS 180 CSS180CSS 180 PDF-M / EN 60947-5-3 EN 954-1 Control Category 4 IEC 61508, suitable for use in SIL 3 applications BG Type-Certification in
More informationGLYCODUR Automotive Applications
GLYCODUR Automotive Applications GLYCODUR in cars Nowadays a great deal is expected of the modern car: Quality, a high degree of comfort, functionality, flexibility, durability, recycling compatibility
More informationDMT PERFORMING UNDER PRESSURE DMT. Pressure Scanner Features. Applications. Description 1/7
Features User Accessible Memory for Test Configuration Management ±0.05% FS System Accuracy EU Throughput Rates of 500 Hz Auto-Negotiating 10/100 BaseT Ethernet with TCP & UDP Protocol Pressure Ranges
More informationIntegrated Hydraulic Manifold Systems
h Integrated Hydraulic Manifold Systems Manifold Systems Introduction After working with several key customers and understanding their needs for complete systems and sub-systems, I H M S Moog Hydrolux
More informationSCHMIDT ManualPress. From 1.6 kn to 22 kn
SCHMIDT ManualPress From 1.6 kn to 22 kn Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual presses are often the
More informationHydraulic Ram Control Unit HSE NG 10
Hydraulic Ram Control Unit HSE NG 0 Design and Function Common features of VTHL ram control units: modular design robust valve elements high dynamics simple control structure The integration of all necessary
More informationSteering unit LAGC. Data sheet
Steering unit LAGC Data sheet Nominal sizes Series Maximum flow HE 14365 / 09.2017 40 1000 1 x and 2 x 80 l / min 2 LAGC HE 14365 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
More informationMAGTROL. WB 23 High-Speed Eddy-Current Dynamometer. WB 23 Data Sheet FEATURES DESCRIPTION COMPLETE PC CONTROL
MAGTROL Data Sheet High-Speed Eddy-Current Dynamometer FEATURES Torque: 80 mn m Speed: up to 100,000 rpm : 120 W continuous; 400 W intermittent Low inertia Very low residual torque Stable braking torque,
More informationElasto-Fluid Springs WES-F. Deceleration Technology. ONLINE Calculation and 2D / 3D CAD Download
Elasto-Fluid Springs WES-F Deceleration Technology ONLINE Calculation and 2D / 3D CAD Download Benefits Compact construction Good reproducibility of deceleration characteristics Simple assembly No adjustment
More informationHeavy-Duty Shock Absorbers HLS-110. Deceleration Technology. ONLINE Calculation and 2D / 3D CAD Download. F m
Heavy-Duty Shock Absorbers HLS-110 Deceleration Technology ONLINE Calculation and 2D / 3D CAD Download F m V S Operating Principle Steel Cap Filling Valve Nitrogen Piston rod Operating Principle HLS models
More informationNever Ending Innovation
News 2013 Directly operated proportional valves Series AP-621L Directly and indirectly operated solenoid valves Series CFB STAINLESS STEEL Directly operated micro solenoid valves Series K8 BOOSTER Directly
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationOn Adaptive Electrohydrostatic Actuators
On Adaptive Electrohydrostatic Actuators 1 1 2 3 4 5 EHA - Introduction CLSP Adaptive Light Weight EHA PDSC Adaptive Heavy Press EHA Mobile Service Unit Conclusion 2 1. EHA - Introduction Time Machine
More information1800 Vibration Test System
1800 Vibration Test System Lansmont s Model 1800 Vibration Test System was designed to meet the demands of a wide range of testing applications. From small products to pallet loads, the 1800 can be configured
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationSteering unit with switchable reaction
Steering unit with switchable reaction Information sheet Nominal sizes 50 400 Series 1 x Maximum flow 50 l / min HE 11873 / 10.2017 2 Steering unit with switchable reaction HE 11873 / 10.2017 Page Content
More informationEFFECTIVE SOLUTIONS FOR SHOCK AND VIBRATION CONTROL
EFFECTIVE SOLUTIONS FOR SHOCK AND VIBRATION CONTROL Part 1 Alan Klembczyk TAYLOR DEVICES, INC. North Tonawanda, NY Part 2 Herb LeKuch Shocktech / 901D Monsey, NY SAVIAC Tutorial 2009 Part 1 OUTLINE Introduction
More informationWHY CHOOSE SERVOTEST? The knowledge and experience to design and build completely unique test equipment for the most demanding applications.
Servotest has gained international recognition as a World leader in servohydraulic test and motion simulation. The Company offers advanced, sometimes highly customised, servohydraulic systems backed by
More informationLEDEEN SEF. Smart electric fail-safe actuator and control systems
LEDEEN SEF Smart electric fail-safe actuator and control systems The Cameron portfolio of LEDEEN* actuators includes a new compact, modular, onboard hydraulic power unit (HPU). This new technology is operated
More informationOverview of Profi le Dampers TR/TR-L
TUBUS-Series Overview of Profi le Dampers Physical Properties of TUBUS Profile Dampers Energy Capacity per unit weight Operating Lifetime PUR Rubber Gummi TUBUS Energy Capacity per unit volume ACE TUBUS
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationSafety drying oven with expended temperature range
MDL series 115 Safety drying ovens Safety drying oven with expended temperature range The BINDER MDL 115 with enhanced control function works at temperatures up to 350 C. This safety drying oven meets
More informationPLEIGER MASCHINENBAU. Valve Actuation, Controls and Automation
Valve Actuation, Controls and Automation PLEIGER MASCHINENBAU -Hydraulic & Electro-Hydraulic Actuators -Linear & Rotary Actuators -Pleiger Controls and Automation -Hydraulic Power Units -Control Valves
More informationComparison between Fluid Viscous Dampers and Friction Damper Devices. Fluid Viscous Dampers (FVD) Friction Damper Device (FDD) Working principle:
Fluid Viscous Dampers (FVD) Working principle: FVD is a central piston strokes through a fluid-filled chamber. As the piston moves it pushes fluid through orifices around and through the piston head. Fluid
More informationBNC SERIES Servo Production Systems
BNC SERIES Servo Production Systems Optimize your production Switch to the new servo-controlled BNC production systems for your production of strip and wire parts. The machines and all processing units
More information