PWI API 610 VERTICAL IN-LINE SINGLE STAGE OH4

Transcription

1 PWI API 610 VERTICAL IN-LINE SINGLE STAGE OH4

2 PWI API 610 VERTICAL IN-LINE SINGLE STAGE OH4 HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at and specify flow and performance needs and obtain pump selection and performance curve. Performances shown are nominal and are to be used for preliminary selection only. 50 Hz Performance Coverage Visit our web site at and specify flow and performance needs and obtain pump selection and performance curve. STANDARD MATERIALS OF CONSTRUCTION API MATERIAL CLASS S-6 S-8 C-6 A-8 CASING A216 GRADE WCB A216 GRADE WCB A487 GRADE CA6NM A351 GRADE CF3M COVER A516 GRADE 70 A516 GRADE 70 A479 TYPE 410SS A479 TYPE 316/316L IMPELLER A743 GRADE CA6NM A743 CF3M 316SS A743 GRADE CA6NM A743 CF3M 316SS SHAFT A276 TYPE 410SS CONDITION "T" A479 TYPE XM-19 A276 TYPE 410SS CONDITION "T" A479 TYPE XM-19 IMPELLER LOCK NUT A479 TYPE 316L A479 TYPE 316L IMPELLER WEAR RINGS 410 SS HT: BHN NITRONIC SS HT: BHN NITRONIC 50 CASING WEAR RINGS 420 SS HT: BHN 420 SS HT: BHN THROAT BUSHING CASING STUDS A193 GRADE B-7 A193 GRADE B-7 A193 GRADE B-7 A193 GRADE B-8 CASING NUTS A194 GRADE 2H A194 GRADE 2H A194 GRADE 2H A194 GRADE B8M *Other API 610 Material Classes and Combinations are available

3 Casing Cover and Seal Chamber API 610 seal chamber allows user to install any API 682 cartridge seal to meet process requirements Renewable throat bushing for controlled seal chamber environment Flat surface seal gland for O-Ring sealing Optional machined gasket area for higher temperature applications or on customers request PWI API 610 VERTICAL IN-LINE SINGLE STAGE OH4 DESIGN FEATURES AND BENEFITS Renewable Casing and Impeller Wear Rings Front and back rings control seal chamber pressure and provides impeller stability Optional non-metallic rings for improved efficiency and dry running Impeller Retention Keyed and secured to shaft with exclusive dual set-screw locknut Impeller Fully enclosed design provides increased efficiency Dynamically balanced to ISO G1.0 criteria before mounting Driver Stand Motor positioning lugs with bolts to facilitate alignment Generous window access allows for easy seal maintenance Throat Bushing Graphalloy Throat Bushing Non-galling, superior wear resistance Assures class-leading rotor stability with lowest-in-class vibration levels Nozzle Load Casing design meets current edition API 610 Nozzle Load requirement Casing Designed for use with or without a mounting plate Pump Casing Precision machining and fully confined controlled compression gasket ensures proper sealing and case to cover alignment ANSI 300# Class RF Flange standard, hydro test pressure 1100 psig

4 PWI API-610 CONSTRUCTION Vertical In-Line Single Stage OH4 Quality Manufactured and tested in the USA Coupling Radially split spacer coupling allows mechanical seal to be removed wtihout disturbing the driver epod Pump Selector Access to end users and specifiers to select your pump online at no password or login requred Delivery 16 weeks for API 610 material class S-6, S-8, and C-6 Refer to the factory on deliveries for other API material classes and customer specific material combinations Driver Readily available standard P base motor to accommodate pump thrust SHORT PANEL DOTTED LINE DOES NOT PRINT

5 PWI API 610 VERTICAL IN-LINE SINGLE STAGE OH4 OUTLINE DIMENSIONS SHORT PANEL DOTTED LINE DOES NOT PRINT PUMP AND DRIVER DIMENSIONS NOTES: 1. Dimensions are in inches. 2. Dimensions of pump are ± 0.12" unless otherwise noted. 3. Dimensional tolerances of motor are in compliance with NEMA MG Pump flange ratings are ANSI B # RF. 5. CCW rotation viewed from top of motor.

6 PWI API 610 VERTICAL IN-LINE SINGLE STAGE OH4 TECHNICAL DATA Typical Applications The PWI is an API rigid coupled vertical in-line pump designed to cover a wide range of applications found in petroleum processing facilities, gas processing, petrochemical, offshore installations (platforms), hydrocarbon and crude oil pipeline an aviation (jet) fueling applications. The rugged, economical and compact PWI in-line design eliminates the need for an expensive baseplate and saves valuable floor space. Typical Services Services covered but not limited by the PWI pump include: n Refinery Process Services n Crude Oil n Off-site hydrocarbon n LPG n Tank Transfer n Water n Tank Farm Booster n Naptha n Fuel Oil n Kerosene n Gasoline PumpWorks Monroe Houston, TX Ph Fax A DIVISION OF PUMPWORKS PWIOH